E2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
|
|
- Darleen Greene
- 5 years ago
- Views:
Transcription
1 Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also available. Be sure to read Safety Precautions on page 7. For the most recent information on models that have been certified for safety standards, refer to your OMR website. Ordering Information s [Refer to Dimensions on page.] Pre-wired s Appearance Sensing distance Output configuration mode NC M mm DC -Wire s EEZ-D-N M EEZ-D-N M DC -wire, NPN EEZ-C M Shielded M mm DC -wire EEZ-D-N M EEZ-D-N M AC -wire EEZ-Y M DC -wire, NPN EEZ-C M M mm DC -wire EEZ-D-N M EEZ-D-N M AC -wire EEZ-Y M Pre-wired Smartclick Connector s (M) Appearance Sensing distance Output configuration mode NC M mm DC -wire, ()-() pin arrangement EEZ-D-MTJ.M DC -wire, ()-() pin arrangement EEZ-D-MTGJ.M Shielded M mm DC -wire, ()-() pin arrangement EEZ-D-MTJ.M DC -wire, ()-() pin arrangement EEZ-D-MTGJ.M M mm DC -wire, ()-() pin arrangement EEZ-D-MTJ.M DC -wire, ()-() pin arrangement EEZ-D-MTGJ.M
2 EEZ Pre-wired Connector s (M) Appearance Sensing distance Output configuration mode NC M mm DC -wire, ()-() pin arrangement EEZ-D-MJ.M DC -wire, ()-() pin arrangement EEZ-D-MGJ.M Shielded M mm DC -wire, ()-() pin arrangement EEZ-D-MJ.M DC -wire, ()-() pin arrangement EEZ-D-MGJ.M M mm DC -wire, ()-() pin arrangement EEZ-D-MJ.M DC -wire, ()-() pin arrangement EEZ-D-MGJ.M Accessories (Order Separately) I/O Connectors (M, Sockets on One Cable End) (s for Pre-wired Connectors: A Connector is not provided with the. Be sure to order a Connector separately.) [Refer to Dimensions on S, S.] Appearance Cable length I/O Connector model number Applicable model number Straight m SF-D-DD m SF-D-GD EEZ-@D-MJ L-shape m SF-D-DD m SF-D-GD Straight m SF-D-DA-F m SF-D-GA-F EEZ-@D-MGJ L-shape m SF-D-DA-F m SF-D-GA-F Smartclick Connector Straight m SF-D-D-F m SF-D-G-F EEZ-@D-MTJ EEZ-@D-MTGJ Mounting Brackets Protective Covers Sputter Protective Covers Refer to Y9@ for details.
3 Ratings and Specifications EEZ Item EEZ-C EEZ-Y EEZ-C EEZ-Y Sensing distance mm ±% mm ±% mm ±% mm ±% mm ±% Set distance * to. mm to. mm to. mm to. mm to. mm Differential travel % max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page.) Standard sensing object Iron, mm Iron, mm Iron, mm Iron, mm Iron, mm Response frequency * Hz Hz Hz Power supply (operating range) Current consumption to VDC ( to VDC), ripple (p-p): % max. C s: Hz Y s: Hz --- C s: ma max. C s: Hz Y s: Hz C s: to VDC ( to VDC), ripple (p-p): % max. Y s: to VAC (9 to VAC), / Hz Leakage current. ma max. Y s: ma max. at VAC, ma max. at VAC Control output Indicators current Residual mode (with sensing object approaching) Protection s Ambient temperature range Ambient humidity range Temperature influence Voltage influence Insulation resistance Dielectric strength Vibration resistance Shock resistance Degree of protection Connection method Weight (packed state) Case Accessories Sensing surface Materials Clamping nuts Toothed washer to ma max. V max. ( current: ma, Cable length: m) D s: indicator (red), Setting indicator (green) D s: indicator (red) D s: D s: NC For details, refer to the Timing chart on page. short- protection, Surge suppressor Operating/Storage: to C (with no icing or condensation) Operating/Storage: % to 9% (with no condensation) ±% max. of sensing distance at C in the temperature range of to C ±.% max. of sensing distance at rated in the rated ±% range MΩ min. (at VDC) between current-carrying parts and case, VAC, / Hz for minute between current-carrying parts and case Destruction: to Hz,.-mm double amplitude for hours each in, Y, and Z directions Destruction:, m/s times each in, Y, and Z directions IEC 9 IP7, in-house standards: oil-resistant Pre-wired s (Standard cable length: m) and Pre-wired Connector s EEZ-D@-N: Approx. 7 g EEZ-D@-MJ: Approx. g EEZ-D@-MGJ: Approx. g Nickel-plated brass PBT Zinc-plated iron Zinc-plated iron Instruction manual EEZ-D@-N: Approx. g EEZ-D@-MJ: Approx. 9 g EEZ-D@-MGJ: Approx. 9 g EEZ-D@-N: Approx. g EEZ-D@-MJ: Approx. g EEZ-D@-MGJ: Approx. g C s: NPN open-collector output ma max. at VDC ( VDC max.) ma max. at VDC ( VDC max.) Y s: to ma C s: V max. ( current: ma, Cable length: m) Y s: Refer to residual characteristic data Refer to page. C s: Detection indicator (red) Y s: indicator (red) For details, refer to the Timing chart on page. C s: short- protection, Reverse polarity protection, Surge suppressor Y s: Surge suppressor C s:, VAC, / Hz for min between current-carrying parts and case Y s:, VAC, / Hz for min between current-carrying parts and case Approx. 7 g Heat-resistant ABS Approx. 7 g *. Use the within the range in which the green indicator is. *. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.
4 Y Y Y Engineering Data (Reference Value) EEZ Sensing Area EEZ-@ EEZ-@ EEZ-@ Sensing Head Distance Y (mm) Sensing Head Distance Y (mm) Sensing Head Distance Y (mm) Influence of Sensing Object Size and Material EEZ-@ EEZ-@ EEZ-@ d d t = mm d d t = mm d d t = mm Iron Brass Brass Iron Stainless steel (SUS) Brass Iron Aluminum Copper Aluminum Aluminum Side length of sensing object: d (mm) Stainless steel (SUS) Residual Output Voltage EEZ-@D@-N EEZ-Y/-Y at VAC EEZ-Y/-Y at VAC Copper Side length of sensing object: d (mm) Stainless steel (SUS) Side length of sensing object: d (mm) Residual output (V) (V) Residual output V (V) Residual output V A VAC A VAC, current (ma) Residual load current (ma) Residual load current (ma)
5 EEZ Leakage Current EEZ-Y/-Y Leakage current (ma) A Protective resistance AC power EEZ-@D@-N Leakage current (ma)... 9 Power supply (V) Power supply (V) I/O Circuit Diagrams DC -Wire s Timing chart Output mode EEZ-D-N EEZ-D-N EEZ-D-N Blue V EEZ-D-MJ EEZ-D-MGJ EEZ-D-MJ EEZ-D-MGJ EEZ-D-MJ EEZ-D-MGJ Sensing object (%) Non-sensing area Unstable sensing area Rated sensing distance Set position (TYP) Stable sensing area Setting indicator (green) indicator (red) Control output Note: The load can be connected to either the or V side. (MJ) Connector Pin Arrangement Note: Pins and V are not used. Note: The load can be connected to either the or V side. (MGJ) Connector Pin Arrangement Note: Pins and V are not used. Note: The load can be connected to either the or V side. NC EEZ-D-N EEZ-D-N EEZ-D-N Non-sensing area Sensing object (%) Rated sensing distance Sensing area indicator (Red) Control output Blue V Note: The load can be connected to either the or V side.
6 EEZ DC -wire s mode Timing chart Output EEZ-C EEZ-C Sensing object Present Not present Operate Reset. Ω Black * Output Detection indicator (red) Blue * ma max. at V, ma max. at V (load current). V AC -Wire s mode Timing chart Output EEZ-Y EEZ-Y Sensing object Present Not present Operate Reset Blue indicator (red) Connections for I/O Connectors mode I/O Connectors Connections DC -Wire s (IEC pin wiring) EEZ-@D-MGJ : Straight : L-shape SF-D@-@A-F D: -m cable G: -m cable EEZ SF (+) Blue ( ) DC -Wire s (previous pin wiring) EEZ-@D-MJ : Straight : L-shape SF-D@-@D D: -m cable G: -m cable EEZ EEZ SF SF Blue ( ) (+) DC -Wire s (IEC pin wiring) EEZ-@D-MTGJ (+) White Blue Black ( ) SF-D-@-F DC -Wire s (previous pin wiring) EEZ-@D-MTJ D: -m cable G: -m cable EEZ SF White Blue ( ) Black (+) Refer to Introduction to I/O Connectors/ Controllers for details.
7 Safety Precautions EEZ Refer to Warranty and Limitations of Liability. This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Do not use this product under ambient conditions that exceed the ratings. Design Influence of Surrounding Metal When mounting the within a metal panel, ensure that the clearances given in the following table are tained. Failure to tain these distances may cause deterioration in the performance of the. Influence of Surrounding Metal (Unit: mm) EEZ-@ EEZ-@ EEZ-@ l Mutual Interference WARNING Precautions for Correct Use D d dia. Item Embedded l d D m n material Iron Aluminum Iron 7 Aluminum Iron Aluminum 7 9 When installing s face-to-face or side-by-side, ensure that the minimum distances given in the following table are tained. Mutual Interference (Unit: mm) Item A B EEZ-@ EEZ-@ EEZ-@ A B m n Aluminum and Iron Cuttings Normally aluminum or iron cuttings will not be detected even if they adhere to or accumulate on the sensing surface. Detection signals may be output for the following: If this occurs, remove the cuttings from the sensing surface.. Relationship between the Size of the Cutting (d) and the Size of the Sensing Surface (D) Cuttings of the size d D on the sensing surface * Cuttings of the size d* (Unit: mm) d Size D EEZ-@ * EEZ-@ EEZ-@ *EEZ-@: d D on the sensing surface.. Cuttings Pressed against the Sensing Surface Mounting Do not tighten the nut with excessive force. A washer must be used with the nut. Part B Part A Note:. The allowable tightening strength depends on the distance from the edge of the head, as shown in the following table. (A is the distance from the edge of the head. B includes the nut on the head side. If the edge of the nut is in part A, the tightening torque for part A applies instead.). The following torque assume washers are being used. Tightening Torque Part A Part B Dimension (mm) Torque Torque EEZ-D@-@ N m EEZ-D@-@ 7 N m EEZ-D@-@ N m EEZ-C EEZ-Y N m 9 N m EEZ-C EEZ-Y 9 N m 9 N m D Cutting Sensing surface Pressed against sensing surface. Cutting 7
8 EEZ Dimensions (Unit: mm) Tolerance class IT applies to dimensions in this data sheet unless otherwise specified. dia. 7 9 Pre-wired Connector s (-MJ/MGJ) M M Indicator * Toothed washer *. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:. mm), Standard length: m *. D s: indicator (red), Setting indicator (green), D s: indicator (red) * dia. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:. mm), Standard length: mm EEZ-D@-N 9 dia. EEZ-D@-N dia. M * Indicator * *. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:.9 mm), Standard length: m Toothed washer The cable can be extended up to m (separate metal conduit). *. D s: indicator (red), Setting indicator (green) D s: indicator (red) Pre-wired Connector s (-MJ/MGJ) M M. Indicator * Toothed washer Pre-wired Connector s (-MJ/MGJ) * *. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:.9 mm), Standard length: m The cable can be extended up to m (separate metal conduit). *. D s: indicator (red), Setting indicator (green) D s: indicator (red) M dia. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:.9 mm), Standard length: mm dia. -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:.9 mm), Standard length: mm EEZ-C EEZ-Y 9 dia. Indicator * * M Two toothed washers *. C s: -dia. vinyl-insulated round cable with conductors (Conductor cross *. C s: Detection indicator (red), section:. mm, Insulator diameter:.9 mm), Standard length: m Y s: indicator (red) Y s: -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:.9 mm), Standard length: m EEZ-C EEZ-Y dia. Indicator * M. Two toothed washers *. C s: -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:.9 mm), Standard length: m Y s: -dia. vinyl-insulated round cable with conductors (Conductor cross section:. mm, Insulator diameter:.9 mm), Standard length: m * *. C s: Detection indicator (red), Y s: indicator (red) Mounting Hole Dimensions F EEZ-@ EEZ-@ EEZ-@ F (mm). dia.. dia.. dia
9 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMR representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMR MAKES WARRANTY OR REPRESENTATI, EPRESS OR IMPLIED, ABOUT N-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKWLEDGES THAT IT ALE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and tained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, s, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; Etc. OMR COMPANIES SHALL T BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTI OR COMMERCIAL LOSS IN ANY WAY CNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATI INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMR PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMR Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMR Corporation All Right Reserved.
E2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E_6_ Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s
More informationE2EZ-X2D1-N 2M E2EZ-X2D2-N 2M
Chip-immune Inductive EEZ CSM_EEZ_DS_E Chip-immune Inductive Correct operation even with aluminum or iron chips sticking to the. Only the sensing object is detected. Pre-wired Smartclick Connector s also
More informationAluminum Excellent Performance, with Aluminum Chip Immunity! The indicator is visible from any direction.
All Metals and Long- Types CSM DS_E and Both Detectable from Long Distances times the aluminum detection of previous models Twice the max. Equipped with a function to prevent the detection of aluminum
More informationE2EY. A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Aluminum-detecting Proximity Sensor
Aluminum-detecting Proximity Sensor EEY CSM_EEY_DS_E_5_1 A Proximity Sensor for Aluminum, Brass and Other Non-ferrous Metals. Iron Is Not Detected. Non-ferrous metals, such as aluminum and brass, are detected.
More informationE2EC. Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E_9_ Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded in metal. Robotics cables provided
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationE3Z-G. Photoelectric Sensor with Grooved Design and Easy Settings. Grooved-type Photoelectric Sensor with Built-in Amplifier. Ordering Information
Grooved-type with Built-in Amplifier EZ-G CSM_EZ-G_DS_E_9_ with Grooved Design and Easy Settings Groove-type with groove width of 5 mm. Models are available with one or two light axes. Models are available
More informationE2KQ-X. Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster. Chemical-resistant Proximity Sensor. Ordering Information
Chemical-resistant Proximity Sensor E2KQ-X CSM_E2KQ-X_DS_E_4_3 Fluororesin-coated Capacitive Sensor with Sensitivity Adjuster Excellent resistance against chemicals and oil with fluororesincoated case.
More informationE2EC. High-sensitivity DC 2-Wire Sensors and Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E High-sensitivity DC -Wire Sensors and Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded
More informationE2K-X4ME1 2M E2K-X4ME2 2M
Cylindrical Proximity Sensor EK- CSM_EK-_DS_E 1 General-purpose Threaded Sensor That Detects Metals and Non-metals Alike Detects both metallic and nonmetallic objects (water, oil, glass, plastic, etc.).
More informationE2EC. Subminiature Sensors with Long-distance Detection. Cable Amplifier Proximity Sensor. Ordering Information
Cable Amplifier Proximity Sensor EEC CSM_EEC_DS_E_8_ Subminiature Sensors with Long-distance Detection Shielded Sensor Heads from -mm to M diameters that can be embedded in metal. Robotics cables provided
More informationAluminum-detecting Proximity Sensor (Separate Amplifier Type)
Aluminum-detecting Proximity Sensor (Separate Amplifier Type) ECY Simple Teaching Function for Simple Adjustment. Easy-to-see Excess Gain Level Indicators. Detects aluminum, copper, and other non-ferrous
More informationE2K-F. Flat Capacitive Sensor with a Thickness of Only 10 mm. Flat Proximity Sensor. Ordering Information. Sensors [Refer to Dimensions on page 4.
Flat Proximity Sensor EK-F CSM_EK-F_DS_E Flat Capacitive Sensor with a Thickness of Only mm Flat Sensor with excellent space efficiency. (Model with built-in Amplifier is only mm thick.) Direct mounting
More informationLong Sensing-distance Capacitive Separate Amplifier Proximity Sensor E2J-W10MA 1M E2J-W20MA 1M. E2J-JC4A Amplifier Unit
Long Sensing-distance Capacitive Separate Amplifier Proximity Sensor Flat Capacitive Sensor with Separate Amplifier Ideal for Mounting on Robot Hands. Flat head is only 5.5-mm thick. Robotics cable ensures
More informationSensing method Appearance Connection method Sensing distance Model. Pre-wired (2 m) Power supply Application Appearance Function Model
Small Spot/Mark (Separate Amplifier) EC-VS/VM CSM_EC-VS/VM_DS_E_6_ Extremely thin beam ideal for detection of minute objects and marks Ideal for detection of small objects and slight color differences
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_4_4 Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationG3NE. Model Number Structure. Solid State Relays. Model Number Legend. Compact, Low-cost, SSR Switching 5 to 20 A
Solid State Relays CSM DS_E_4_1 Compact, Low-cost, SSR Switching 5 to 20 A Wide load voltage range: 75 to 264 VAC. Both 100-V and 200-V loads can be handled with the same model. Dedicated, compact aluminum
More informationE4C-UDA CSM_E4C-UDA_DS_E_12_2
Digital Amplifier Ultrasonic Sensor E4C-UDA CSM_E4C-UDA_DS_E_12_2 Compact, Cylindrical Reflective Ultrasonic Sensor with Easy Setting Stable operation for a variety of objects regardless of color, transparency,
More informationG3B/G3BD. Model Number Structure. Ordering Information. Solid State Relays Model Number Legend. List of Models
Solid State Relays G3@-VD CSM_G3B_G3BD_DS_E_5_1 International Standards for G3B Series, Same Profile as MK Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (models numbers
More informationSolid State Relays with Failure Detection Function
Solid State Relays with Failure Detection Function CSM DS_E_2_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously outputs
More informationG3FM. Model Number Structure. Ordering Information. Solid State Relays. Model Number Legend. List of Models
Solid State Relays CSM DS_E_5_3 100-μA-max. Leakage Current, No Bleeder Resistor Required Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket (according to actual OMRON measurements).
More informationS82S (3/7.5-W Models)
Switch Mode Power Supply (3/7.5-W Models) CSM DS_E_4_3 Miniature DIN Rail Mounting DC-DC Power Supplies 65 mm depth enables mounting onto control panels with 100 mm depth. Inputs: 10.2 to 27.6 VDC (DC
More informationName No. of I/O points Model Safety inputs: 12, test outputs: 4
Safety I/O s DST1 Series CSM_DST1 Series_DS_E_7_3 Distributed Safety s That Reduce Wiring. Lineup includes four models to accommodate various I/O types and number of I/O points. Monitor the safety system
More informationCK3W-PD048 CSM_CK3W-PD048_DS_E_DITA_1_2
CK3W Power Supply Unit CK3W-PD048 CSM_CK3W-PD048_DS_E_DITA_1_2 Supplies power to the CK3M Controller CK3W-PD048 Features 24 VDC input The power supply status indicator shows operating status 1 Ordering
More informationThe Next-generation Sensor Networking Units That Revolutionize the Workplace from Introduction and Startup though Operation. Fiber Units.
Sensor Communications Unit CSM DS_E_1_1 The Next-generation Sensor Networking Units That Revolutionize the Workplace from Introduction and Startup though Operation Low initial cost achieved by distributed
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX/6 CSM_EE-SX/6_DS_E_1_ Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes that enable switching
More informationF3W-E. Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts. Picking Sensor. Features
Picking Sensor FW-E CSM_FW-E_DS_E Compact Body, High-visibility Indicators, and Ideal for Picking Systems for Small Parts. A variety of part sizes can be handled: FW-D sensing width: 00 mm, FW-E sensing
More informationProximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C
Proximity Ideal for High Temperatures and Cleaning Processes EEH CSM_EEH_DS_E Proximity Ideal for the Food and Beverage Industry SUS6L Body, IP69K Protection, Resistant to High Temperatures and Detergents
More informationNumber of input channels
Safety Relay Unit (Sensor Connector Type) CSM DS_E_3_1 Less Wiring Required with Safety Light Curtain Sensor connector allows direct connection to OMRON 3SJ Safety Light Curtains with PNP outputs. Reduces
More informationG3H/G3HD. Model Number Structure. Solid State Relays Model Number Legend
Solid State Relays G@-VD CSM_GH_GHD_DS_E_6_ New Models with International Standards Added to GH Series (-VD in model number). Same Profile as LY and LY Bi-power Relays Certified by UL, CSA, and VDE (models
More informationE6J-C. Ultracompact Rotary Encoder with External Diameter of 20 mm. Ultracompact 20-mm-dia. Incremental Rotary Encoder. Ordering Information
Ultracompact 20-mm-dia. Incremental Rotary Encoder CSM DS_E_4_1 Ultracompact Rotary Encoder with External Diameter of 20 mm Incremental model External diameter of 20 mm. Resolution of up to 1,000 ppr.
More informationModel A7BS
Thumbwheel Switch ABS/ABL CSM_ABS/ABL_DS_E Wide Range of Locking-type s Available Character height of.8 or. mm makes for easy-toview display. Installation is easy with snap-in mounting. The series includes
More informationG3F/G3FD. Model Number Structure. Solid State Relays Model Number Legend
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_5_3 International Standards for G3F Series, Same Profile as MY Power Relays Reduces wiring work by 60% when combined with the PFY-08- PU Push-In Plus Socket
More informationE2EQ-X10D1-M1TGJ 0.3M
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E_9_ Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire
More informationOptions. 24-VDC service power supply. RUN output. No Yes No 24 VDC 70 W NX-PD7001
NX-Series Power Supply Unit CSM_NX-PA_PD_DS_E_2_2 Powerful power supply unit to supply stable power to the NX-series controller. Stable power supply is available from the NX-series CPU Unit to each I/O
More informationType Terminal Block Connector No. of poles Appearance Model 40 XW2B-40G4 50 XW2B-50G4. 40 XW2B-40G5 Flat Cable Connectors
Standard-type Connector- Conversion Units XWB CSM_XWB_DS_E Simplifies Connector and terminal block replacement, and requires less in-panel wiring. Mount to DIN Track or via screws. MIL Flat Cable Connectors
More informationCSM_PYF S/P2RF- -S_DS_E_2_5
Screwless Clamp Terminal Sockets PYF@@S/P2RF-@@-S CSM_PYF S/P2RF- -S_DS_E_2_5 New Screwless Terminal Sockets Added for MY and G2R Relays. Simplified wiring without tightening screws. Two wires can be independently
More informationConnecting Sockets, Mounting Brackets, DIN Rails
Connecting Sockets, Mounting Brackets, DIN Rails CSM_ConnectionSocket_DS_E_3_1 Durable, Easy-to-handle Connecting Sockets and Mounting Brackets Highly reliable Track-mounted and Back-connecting Sockets
More informationAppearance Sensing distance Output configuration Operation mode Model. Appearance Sensing distance Output configuration Operation mode Model
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire Smartclick
More informationAppearance Sensing distance Output configuration Operation mode Model NO E2EQ-X7D1 2M
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. Pre-wire Smartclick
More information4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
More informationM22. Round Indicator Series with 22 dia. and 25 dia. (when using a ring) Indicator (Cylindrical 22/25-dia.) List of Models. Model Number Structure
Indicator (Cylindrical 22/25-dia.) CSM DS_E_3_4 Round Indicator Series with 22 dia. and 25 dia. (when using a ring) Same type as the A22-series Pushbutton Switches. Use 25-dia. ring to install in 25-dia.
More informationP7TF-IS16/OS16/OS08. I/O classification I/O points Internal I/O common Rated voltage Model 12 VDC P7TF-IS16 DC12 24 VDC P7TF-IS16 DC24 For inputs
I/O Terminal Socket PTF-IS/OS/OS CSM_PTF-IS_OS_OS_DS_E I/O Terminal Sockets to Flexibly Build Systems Mount either GT I/O Relays or GTA SSRs. Compact size for both Input and Output I/O Terminal Sockets:
More informationLong-time range model (0.1 min to 10 h) 24 VAC; SPDT H3RN-1 H3RN-11 12, 24 VDC DPST-NO H3RN-2 H3RN-21
Solid-state timer CSM DS_E_3_2 Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating
More informationThread length (overall length)
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationE2FM. Inductive Proximity Sensor in full metal housing. Application. Continuous Impact Test. Brush Test
Inductive Proximity Sensor in full metal housing Full body stainless steel housing for highest mechanical protection Low frequency modulation for metal chip iunity Flame retardant cable for high protection
More informationProbe Pin XP3A. Electroplated Probe Pin for High Reliability. Feature. List. New Product News
New Product News Probe Pin Electroplated Probe Pin for High Reliability The Probe Pin that is made of only one part. The flat structure helps you reduce the pin pitch in comparison with standard probe
More informationReliable Detection Unaffected by PCB Holes or Notches. PCB Sensors. Ordering Information. Sensors [Refer to Dimensions on page 4.
PCB Sensors ES-LS@ CSM_ES-LS DS_E_5_2 Reliable Detection Unaffected by PCB Holes or Notches High-limit ES-LS@ is suitable for incorporation in devices. Wide-range ES-LS@W is ideal for detecting tall components
More informationModel Number Structure
Digital Panel Meter CSM DS_E_3_1 Easy-to-use, w-cost Digital Panel Meter that Accepts DC Input Compact DIN-size (96 x 48 (W x H)) body. Mounting thickness of only 3.5 mm required. Highly visible display
More informationShape Model Measurement range Model Straight 50 to 300 mm. Straight 70 to 800 mm
Digital Amplifier Ultrasonic Sensor CSM DS_E_1_1 A Reflective Sensor That Handles All Types of Sensing Object Colors and Patterns Compact with a Broad Selection of Side-view Heads Slim with analog outputs
More informationAppearance Sensing distance Output configuration Operation mode Model. Appearance Sensing distance Output configuration Operation mode Model
Spatter-resistant Proximity Sensor EEQ CSM_EEQ_DS_E Spatter-resistant Fluororesincoate Proximity Sensor Superior spatter resistance. Long Sensing-istance s ae for sensing istances up to mm. DC -Wire s.
More informationElectroformed Probe Pins XP3A
New Product Electroformed Probe Pins Electroplated Probe Pins for High Reliability The Probe Pin that is made of only one part. The flat structure helps you reduce the pin pitch in comparison with standard
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationFeatures various encoder interfaces and controls multiple analog servo drives at high speeds
CK3W Axial Interface Unit CK3W-AX Features various encoder interfaces and controls multiple analog servo drives at high speeds CK3W-AX Features One CK3W-AX Unit controls up to four axes Analog input type
More informationName Specifications Model Standards RS-422A Converter. Converts RS-233C to RS-422A/RS-485. CJ1W-CIF11 UC1, N, L, CE
SYSMAC Option CSM DS_E_2_1 The RS-232C port of the SYSMAC series can be changed into RS-422A/485 port. The connects directly to a CS/CJ-series RS-232C port and converts RS-232C to RS-422A/485. Features
More informationPower supply voltage Output configuration Output phases Resolution (pulses/rotation) Model. 100, 200, 360 E6A2-CWZ5C (resolution) 0.
Incremental 25-mm-dia. Rotary Encoder CSM DS_E_5_1 Compact Encoder with External Diameter of 25 mm Incremental model External diameter of 25 mm. Resolution of up to ppr. Be sure to read Safety Precautions
More informationNE1A-SCPU Series. Safety Network Controller. Achieve Safety Control through Programming. Ordering Information. Specifications.
Safety Network Controller NEA-SCPU Series CSM_NEA-SCPU_Series_DS_E Achieve Safety Control through Programming. Compact Safety Controller. The NEA-SCPU-V provides built-in safety inputs and 8 built-in safety
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationE2E. High performance in small sizes. Miniature Cylindrical Proximity Sensor. Ordering Information
Miniature Cylindrical Proximity High performance in small sizes pre-wired and M8 connector models 3 mm, 4 mm, 5.4 mm and M5 sizes response frequency up to 3 khz Ordering Information Size Sensing Distance
More informationZN-CTX/-CTM. Portable Power Monitor. Easy and Quick Checking Power at the Worksite. Ordering Information. Portable Power Monitor
Portable Power Monitor ZN-CTX/-CTM CSM_ZN-CTX_-CTM_DS_E 2 Easy and Quick Checking Power at the Worksite Display and record power consumption without stopping the power supply. Battery driven, mounted with
More informationCMOS Laser Sensor with Built-in Amplifier ZX0
New Product CMOS Laser Sensor with Built-in Amplifier ZX0 Stable Detection of Level Differences in the Order of 0.1 mm Dependable detection without being influenced by color, material, or surface conditions.
More informationCS1W-B7A. CS-series B7A Interface Unit. It transmits 16 points of I/O signals per word with a pair of cables. Easy and minimized wiring effort,
CPU42 RUN ERR/ALM INH PRPHL/COMN OPEN MCPWR BUSY OPEN PERIPHERAL PORT (RS-232C) CS-series B7A Interface Unit CSM DS_E_3_2 It transmits 16 points of I/O signals per word with a pair of cables. Easy and
More informationG9H. Ordering Information. Hybrid Power Relay. List of Model. Accessories (Order Separately) Connecting Socket Mounting Plate
Hybrid Power elay CSM DS_E_6_ Hybridization of a Magnetic elay and an SS Achieves 0-A Switching for 0 Million Operations. UL/CSA certified (-US models). Using a triac to open and close the circuit reduces
More informationD5B. Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics. Mechanical Touch Switch. Model Number Structure
Mechanical Touch Switch D5B CSM_D5B_DS_E_3_2 Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics Slow-action switching mechanism used. Gold-plated contact with coil spring
More informationCQM1 I/O Terminal Block Conversion Adapter. Easy and secure replacement by reusing the I/O terminal block wiring.
CQM1 I/O CSM_CJ1W-AT4 DS_E_1_1 Easy and secure replacement by reusing the I/O terminal block wiring You can replace CQM1(H) Series with CJ Series, efficiently using your assets. Time for wiring works and
More informationNPN output. 200 mm. Type Cable length Model Remarks
Retroreflective Photomicrosensor with Lens CSM DS_E_5_2 Photomicrosensor with light modulation for reduced external light interference. Easy adjustment and optical axis monitoring with a light indicator.
More informationType High-sensitivity. Medium-sensitivity models models Sensed current 30 ma (fixed) 100 ma/200 ma 200 ma/500 ma 500 ma/1,000 ma Operating time
Ground Fault Relay CSM DS_E_9_3 Economical, Compact, High-performance, DIN 8 8-mm Ground Fault Relay for Low Voltages Performs continuous monitoring and detection of ground faults in low-voltage circuits
More informationE3S-GS/VS. Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors. Small Spot/Mark Sensor with Built-in Amplifier
Small Spot/Mark Sensor with Built-in Amplifier CSM_E3S-GS_VS_DS_E_2_1 Both Red-light Models and Greenlight Models to Detect a Wide Variety of Colors Be sure to read Safety Precautions on page. Ordering
More informationEE-SX97 40% Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. Slot-type Photomicrosensor.
Slot-type Photomicrosensor EE-SX CSM_EE-SX_DS_E Built-in connector enables downsizing and easier connection. Protective circuit for safe operation. A built-in connector minimizes the shape and dimensional
More informationEE-SX77/87. Slim, Compact Photomicrosensor that is still easy to use. Photomicrosensor with Slim Cable (Non-modulated) Ordering Information
Photomicrosensor with Slim Cable (Non-modulated) EE-SX77/87 CSM_EE-SX77_87_DS_E_7_2 Slim, Compact Photomicrosensor that is still easy to use. Compact, thin profile enables dense mounting. Indicator is
More informationSmart Sensors with Ultra-High-Speed Color CCD Cameras mm to mm (variable) mm to mm (variable)
Smart Sensors with Ultra-High-Speed Color CCD Cameras ZFV-C CSM_ZFV-C_DS_E_1_2 Simple to use. Detection abilities close to human vision. One-touch automatic setting for stable detection 2.2-inch monitor
More informationIndicator (Square) Ultra Bright LED Type
New Products Indicator (Square) Ultra Bright LED Type M2S Indicator Series with Square 40-mm Body. New models added with Ultra LEDs. New models with ultra bright LEDs added to singlescreen models. Previous
More informationModel Number Structure
Digital Panel Meter CSM DS_E_4_1 Easy-to-use, w-cost Digital Panel Meter that Accepts AC Input Compact DIN-size (96 x 48 (W x H)) body. Mounting thickness of only 3.5 mm required. ghly visible display
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationInstallation Sensing distance Connection Output configuration Operation mode NO Operation mode NC
Standard (thin shape) Inductive Proximity Sensor Thin shape for space saving surface mounting Direct side wall mounting for bracket-less installation Ordering Information DC 3-wire Models Installation
More informationE2EM. Long-distance Proximity Sensor. Ordering Information. Safe Mounting with Greater Sensing Distance and Easy Wiring with No Polarity
Long-distance Proximity Sensor Safe Mounting with Greater Sensing Distance and Easy Wiring with No Polarity Ensures a sensing distance approximately 1.5 to 2 times larger than that of any conventional
More informationM16-J M16-A M16-T
Indicator (Cylindrical 16-dia.) CSM DS_E_7_2 Cylindrical 16-dia. Indicator Same basic design as the A16 Pushbutton Switch. Refer to Safety Precautions for All Pushbutton Switches/ Indicators and Safety
More informationDimension A. Dimension B
Slim Connector-Terminal lock Conversion Units CSM DS_E_2_3 New Slim Connector-Terminal lock Conversion Units. Mounting area reduced by 35% (in comparison with 40-pole XW2 Units) to contribute to downsizing
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationModel NPN output PNP output Standard. configuration
Slot-type Photomicrosensor (Non-modulated) *1 EE-SX4/6 CSM_EE-SX4_6_DS_E 1 Global Standard Slot-type photomicrosensors with 0- to 100-mA direct switching capacity. Series includes models that enable switching
More informationE8F2. Pressure Sensor with Easy-to-Read LED Display. Digital Pressure Sensor. Ordering Information. Sensors (Refer to Dimensions on page 7.
Digital Sensor CSM DS_E_4_3 Sensor with Easy-to-Read LED Display status can be checked at a glance from the digital display and bar display. Measurement pressure prevents incorrect outputs due to momentary
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
More informationCable specifications PVC
IO-Link Proximity Sensor (Spatter-resistant Models) EEQ-@-IL@ IO-Link Makes Sensor Level Information Visible and Solves the hree Major Issues at Manufacturing Sites! A Proximity Sensor hat Can Be Used
More informationOutput configuration Contact form Operation indicator Cable length Model PNP open collector. 1 m D5F-2B10 (+ common) ON when operated
High-precision Optical Switch D5F CSM_D5F_DS_E_2_2 Optical System Achieves 1-μm Operating Position Repeatability in this 4-way Switch No-contact structure for high reliability. Ceramic materials in measuring
More informationAppearance Sensing/Setting range Model. Setting range Max. setting 50 to 500 mm. 40 to 200 mm. 200 mm. Sensing range. 5 to 200 mm
-settable Photoelectric Sensor with Metal Case E3S-CL CSM_E3S-CL_DS_E 2 Simply Set the to Reliably Detect Workpieces of Various Colors Reliable detection regardless of color or material. Black/white error
More information250 mm 1 m. Name Sensing distance Model Quantity Remarks 250 mm E39-R6 1 Supplied with the product. Reflectors 1 m [250 mm] * E39-R
Transparent Bottle Sensor ES-CR62/67 CSM_ES-CR62_67_DS_E Ideal for Detecting Transparent Glass and Plastic Containers Reliably detects narrow 5-mm gaps between bottles (When using the E9-R6). Significantly
More informationG3S4-A 5 VDC 12 VDC 24 VDC 0.6 A at 75 to 264 VAC (See note 1.) G3S4-A1 5 VDC 12 VDC 24 VDC Yes G3SD-Z01P-PD 1 A at 3 to 26 VDC (See note 2.
Terminal SSR G3S CSM_G3S_DS_E_7_ Compact Terminal SSR with Outputs Easy-to-use SSR block that combines four compact G3S SSRs, sockets, and heat sink in one unit. Easy wiring with separate I/O terminal
More informationTime-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter
Solid-state Timer Solid-state Timer with Variable Time Ranges Four time ranges are selectable per timer unit. Wide timing range of 0.05 second to 30 hours can be covered by a combination of five timer
More informationE2K-C. Long-distance Capacitive Sensor with Adjustable Sensitivity. Long-distance type. Ordering Information. Sensors [Refer to Dimensions on page 8.
Long-distance type CSM DS_E 4 Long-distance Capacitive with djustable Sensitivity CE Marking for DC 3-wire models and C/DC 2-wire models. Noise-resistant models are also available for environments with
More informationIndicator (Square) Ultra Bright LED Type
New Products Indicator (Square) Ultra Bright LED Type M2P Large Square-bodied Indicators. New models added with Ultra LEDs. New models with ultra bright LEDs added to single- models. Previous models not
More informationClassification Applicable models Specification Type Model
Connect Terminal Box (Muting Terminals) F39-TC5 CSM_F39-TC5_DS_E_4_1 Significantly reduces amount of wiring between Safety Light Curtains and Muting Senss. As of August 2008 Provides IP67 protection against
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationIntelligent Flag Amplifier
V0 RFID System V0-HAM42-DRT Intelligent Flag Amplifier for CompoBus/D System Configuration Master Unit Master Unit CompoBus/D ( -compatible) I/O I/O V0-HAM42-DRT (Amplifier) V0-HS@@ (Sensors) V0-D@@ (Data
More informationModel Number Structure
Solid State Relays G3@-VD CSM_G3F_G3FD_DS_E_4_2 International Standards for G3F Series, Same Profile as MY Power Relays Shape-compatible with mechanical relays. Certified by UL, CSA, and VDE (model numbers
More informationKnob-type Selector Switches
New Product Knob-type Selector Switches ANS/ANW Selector Switches with -mm Diameters. Universal Design That Emphasizes Color Coding, Workability, and Safety Easy to Use You can connect up to three Switch
More informationModel Number Structure
Solid State Relays CSM DS_E_2_1 I/O SSRs That Mount to OMRON s G7TC I/O Block Input and output modules are available in wide variety. Snaps easily into P7TF I/O Terminals and can be used together with
More informationThrough-beam pre-wired E3F1-TN11 2M *1 E3F1-TP11 2M *1 15 m. pre-wired E3F1-RN11 2M E3F1-RP11 2M 0.1 to 3 m
Photoelectric sensor in compact M8 housing EF M8 size Photoelectric sensor with best value at competitive price Bright visible red LED enabling easy alignment Compact and robust housing for easy integration
More informationNJ-Series Power Supply Unit NJ-PA/PD
NJ-Series Power Supply Unit CSM_NJ-PA_PD_DS_E_1_2 Powerful power supply unit to supply stable power to the NJ-series controller. Stable power supply is available from the NJ-series CPU Unit to each I/O
More informationSmart Sensors (with Ultra-High-Speed CCD Camera) ZFV Series
Smart Sensors (with Ultra-High-Speed CCD Camera) ZFV Series Ordering Information Sets of Sensor Head and Amplifier Unit Type NPN Narrow View/Single Function ZFV-R1010 ZFV-R1015 Narrow View/Standard ZFV-R1020
More informationHandheld Reader Writer
Handheld Reader Writer CH1D-V2 A Compact Lightweight Easy-to-use Pen-type Reader Writer. Connects directly to a personal computer or PLC via RS-232C. The Reader Writer s protective construction is IP63
More information