Portable Hardness Tester DHT-100
|
|
- Gloria Bryant
- 5 years ago
- Views:
Transcription
1 Portable Hardness Tester DHT-100 Large LCD display with back light Impact devices D DC DL C D+15 G and E are available for special applications RS 232 output Automatic conversions to: Brinell HB, Rockwell HRB, HRC, Vicker HV and Shore HS hardness Automatic mean value Data storage capacity Conforming to ASTM A 956 Technical specification Measuring Range See the table1 Materials Steel & Cast Steel, Alloy tool steel, Stainless steel, Grey cast iron, spheroidal iron, cast aluminum, brass, bronze, wrought copper alloy. Hardness Scales HL, HRC, HRB, HS, HB, HV Accuracy +/- 0.5% (HLD=800) Display Large LCD display with back light Output RS 232 Memory 1250 group Battery type 2 AAA alkaline Operating temperature -20 ~ +50 Dimensions 108 x 62 x 25mm Weight 230 grams Table 1 (For impact device D) Materials HL HRC HRB HB HS HV ST & CAST ST 300~ ~ ~ ~ ~ ~940 CWT STEEL 300~ ~ ~898 STAINLESS 300~ ~ ~ ~655 85~802 GC IRON 360~650 90~334 NC IRON 400~ ~367 CAST ALUM 174~560 20~159 BRASS 200~ ~ ~173 BRONZES 300~700 60~290 COPPER 200~690 45~315 The ranges are stipulated by the application limits of the relevant static procedure. Basic Unit Small supporting ring Impact device D Two AAA batteries Test block with HLD-value Software and Cable Carrying case Operation manual Cleaning brush Certificate Optional accessories Mimi-printer and Cable Impact devices:dc,+15,dl,g,c,e Special support rings
2 Portable Hardness Tester DHT-200 Impact device provides testing at any angle, even upside down Automatically recognizes the impact device and adjust internal parameters Data output USB port and built-in mini-printer data output Internal memory in 200 files which can store most 1750 average readings (depends on the average times selected) Lower and upper limits setting with Low-High display judge Works on 4 AA rechargeable Ni-MH batteries with working more than 48 hours continuously Conforming to ASTM A 956 Technical specification Display LCD 320 x 240 LCD with LED back-light Display Functions Impact direction, Date, Time, Battery power consumption, Memory reference, Hardness scale, Hardness value, Average value, Max/Min value, Material, Type of impact device connected, Times Accuracy Within + / -0.5% (HLD=800) Statistics Average value Hardness Parameter HL, HRC, HRB, HV, HB, HS Measuring Range/Metallic See the table 1 Impact Device D (standard) Optional Impact Device DC/D+15/DL/C/G/E Impact Device Recognize Manually/Automatically Memory 200 files with most 1750 average readings depending on the average times Output USB interface or Built-in mini-printer Date and Time Setting date and time Limitation Setting the upper or lower limitation LCD Contrast Adjust the LCD contrast Auto Shutdown On or Off User Defined Defined the measurement conditions Battery 4 AA rechargeable batteries Operating Time works more than 48 hours continuously without backlight Operating temperature -20oCto+50oC (impact device: 80oC max. briefly) Dimensions 215(H) 140(W) 45(T)mm Weight 450g ( with 4 AA batteries) Basic Unit Impact device D Test block with HLD-value Carrying case Cleaning brush Small supporting ring Software and Cable AC adapter/charger Operation manual Certificate Optional accessories: Impact devices: DC, D+15, DL, G, C, E Special support rings
3 Portable Hardness Tester DHT-300 Dynamic hardness testing; quick and reliable Wide measuring range in HL value and direct display of converted hardness values in Rockwell HRB, HRC, Vickers HV, Brinell HB and Shore HS For most metals Impact device provides testing at any angle, even upside down Data output USB port and internal memory in a batch of 1250 average readings Lower and upper limits setting with Low-High display judge Works on 3.7V rechargeable lithium-battery with working more than 16 hours continuously; auto-off after two minutes Conforming to ASTM A 956 Technical specification Hardness parameter HL, HRC, HRB, HV, HB, HS Measuring range / metallic materials See the table 1 Display 112 x 64 LCD Display functions Hardness scale, hardness value, average indicator and average value, impact direction, memory reference, battery power consumption Accuracy Within+/- 0.5% (HLD=800) Statistics Average value Memory 1250 groups Output USB port Impact device (standard) D Optional Impact Device DL / C Power 3.7V rechargeable lithium-battery with working more than 16 hours continuously Operating temperature -20oC ~ +50oC Overall dimensions 158 x 41 x 26mm Basic Unit with Impact device D Test block with HLD-value Carrying case Cleaning brush Small supporting ring Software and Cable AC adapter / charger Operation manual Certificate Optional accessories: Special support rings
4 Optional Impact Devices D C DC D+15 DL G Technical specification Impact Devices D / DC / DL D+15 C G Impacting energy 11Nmm 11Nmm 3Nmm 90Nmm Mass of impact body 5.5g / 5.5g / 7.3g 7.8g 3.0g 20g Test tip Hardness 1600HV 1600HV 1600HV 1600HV Diameter 3mm 3mm 3mm 5mm Material Tungsen carbide Tungsen carbide Tungsen carbide Tungsen carbide Impact body Diameter 20mm 20mm 20mm 30mm Length 147 / 86mm 162mm 141mm 254mm Weight 75 / 50gr 80gr 75gr 250gr Max. Hardness of work piece 940HV 940HV 1000HV 650HB Preparation of surface; Roughness class ISO N7 N7 N5 N9 Max. roughness depth Rt 10µm 10µm 2.5µm 30µm Average roughness Ra: 2µm 2µm 0.4µm 7µm Min. weight of sample; Of compact shape 5kg 5kg 1.5kg 15kg On solid support 2kg 2kg 0.5kg 5kg Coupled on plate 0.1kg 0.1kg 0.02kg 0.5kg Min. thickness of sample; coupled 3mm 3mm 1mm 10mm Min. thickness of hardened layers 0.8mm 0.8mm 0.2mm - Size of indentation of spherical test ti With 300HV Diameter 0.54mm 0.54mm 0.38mm 1.03mm Depth 24µm 24µm 12µm 53µm With 600HV Diameter 0.45mm 0.45mm 0.32mm 0.90mm Depth 17µm 17µm 8µm 41µm With 800HV Diameter 0.35mm 0.35mm 0.30mm - Depth 10µm 10µm 7µm -
5 Optional Support Rings No. Type Sketch of non-conventional supporting ring Remarks 1 Z10-15 For testing cylindrical outside surface R10~R15 2 Z For testing cylindrical outside surface R14.5~R30 3 Z25-50 For testing cylindrical outside surface R25~R50 4 HZ11-13 For testing cylindrical inside surface R11~R13 5 HZ For testing cylindrical inside surface R12.5~R17 6 HZ For testing cylindrical inside surface R16.5~R30 7 K10-15 For testing spherical outside surface SR10~SR15 8 K For testing spherical outside surface SR14.5~SR30 9 HK11-13 For testing spherical inside surface SR11~SR13 10 HK For testing spherical inside surface SR12.5~SR17 11 HK For testing spherical inside surface SR16.5~SR30 12 UN For testing cylindrical outside surface, radius adjustable R10
6 Ultrasonic Thickness Gauge DC-2000B Easy to operate and pocket-size Display resolution of 0.01mm or 0.001inch Optional transducers are available for myriad of applications Suitable for metallic and nonmetallic materials Operating temperature -20 ~ +50, -4 F ~ +122 F Specifications DISPLAY LCD: with back-light Display Resolution: Standard: 0.01mm or 0.001in, Low: 0.1mm or 0.01in Measuring unit mm / inch MEASUREMENTS Measurement Mode: Pulse echo with dual element transducer Measuring Range: 0.7mm ~ 350 mm or 0.027in ~ 13.78in (Depending on the transducer, material, surface condition, temperature) Sound Velocity: m/s or ~ in/ s Measurement Rate: 2 per second POWER SUPPLY Battery: 2 AAA alkaline batteries Operating Time: approx. 150 hours batter life without backlight, low Battery Indicator Auto Shutdown: 2 minutes without operating GENERAL Operating Temp.: -20 ~ +50, - 4OF ~ +122 Dimensions: 108(H 61(W) 25(T)mm or 4.24(H) 2.40(W) 0.98(T)in Weight: 230g (with 2 AAA batteries) Basic unit Standard 5MHz probe PT-08 Built-in calibration block Two AAA batteries Couplant Software and cable Operation manual Certification Carrying case Optional accessories: Probe ZT-12 Probe GT-13 Probe PT-04 Probe PT-06
7 Ultrasonic Thickness Gauge DC-2020B Easy to operate and pocket-size Display resolution of 0.01mm or 0.001inch RS 232C output Optional transducers are available for myriad of applications Suitable for metallic and nonmetallic materials Operating temperature -20 to +50, - 4 to +122 Specifications: Display LCD: with back-light Display Resolution: Standard:0.01mm or 0.001in Low: 0.1mm or 0.01in Measuring unit mm/inch Measurements Measurement Mode: Pulse echo with dual element transducer Measuring Range: 0.7mm 350 mm or 0.027in 13.78in Depending on the transducer, material, surface condition, temperature Sound Velocity: m/s or in/µs Measurement Rate: 2 per second Average Mode: 2 to 9 times average measurement Limitation Mode: Upper-lower limitation setting Memory: 4000 groups Print/Output: RS 232C Power Supply Battery: 2 AAA alkaline batteries Operating Time: approx. 150 hours batter life without backlight, low Battery Indicator Auto Shutdown: 2 minutes without operating Ggeneral Operating Temp.: -20 to +50, - 4 to +122 Dimensions: 108(H 61(W) 25(T)mm or 4.24(H) 2.40(W) 0.98(T)in Weight: 230g (with 2 AAA batteries) Basic unit Operation manual Standard 5MHz probe PT-08 Certification Built-in calibration block Two AAA batteries Couplant Carrying case Optional accessories ProbeZT-12 ProbeGT-13 ProbePT-04 ProbePT-06 Mini-printer and cable
8 Optional Ultrasonic Probes Long holder of probe The long holder is available for probes PT08,PT06,ZT12 The length can be orderd by requirements. Cylindrical tip of probe The cylindrical tip is available for probes PT08,PT06,ZT12 The Diameter can be orderd by requirements.
Portable Hardness Tester
A Portable Hardness Tester A Portable Hardness Tester TIME 5300 P02 A2 Portable Hardness Tester TIME 530 P03 A3 Portable Hardness Tester TIME 5302 P04 A4 Portable Hardness Tester TIME 5303 P05 A5 Portable
More informationHARTIP2000 is an innovative portable Leeb hardness
HARTIP HARDNESS TESTER SADT HARTIP2000/HARTIP2000 D&DL 1 SADT HARTIP2200 2 SADT HARTIP1900 3 SADT HARTIP1800/HARTIP1800 D&DL 4 SADT HARTIP1800B/HARTIP1800B D&DL 5 SADT HARTIP 3000 6 SADT HARTIP1500/HARTIP1000
More informationDHT-100 Instruction Manual
DHT-100 Instruction Manual Content 1. SUMMARY... 1 2. FUNCTIONS... 1 2.1. Typical Applications... 2 2.2 Technical Data... 2 2.3 Available Functions... 3 2.4 Measuring and Converting Ranges... 3 2.5 Impact
More informationPortable Hardness Tester. User's Manual
Portable Hardness Tester User's Manual Content 1. Introduction 1.1 Principle Scope 1 1.2 The Hardness Value 2 1.3 Features 2 1.4 Types 3 2. Technical Specifications 4 3. Checking Supplied Accessories 5
More informationSAUTER HK-D/ HK-DB Version /2017 GB
Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@sauter.eu Tel: +49-[0]7433-9933-199 Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Mobile Leeb Hardness Tester SAUTER HK-D/ HK-DB
More informationYHT-100 Leeb Hardness Tester Operation Instructions
YHT-100 Leeb Hardness Tester Operation Instructions Contents 1 General description... 3 1.1 Features... 3 1.2 Main Application and Testing Range... 3 1.3 Types and specification... 6 1.4 Operating conditions:...
More informationEPX300 Hardness Tester USER S MANUAL. Please Carefully Read This First. LIPPOLIS optical video technology
EPX300 Hardness Tester USER S MANUAL Please Carefully Read This First LIPPOLIS optical video technology www.lippolis.com e-mail: lippolis@lippolis.com Contents CAUTION 1 1. SUMMARIZE 2 1.1 Measuring principle
More informationLHT-200. Portable Hardness Tester. User s Manual
LHT-200 Portable Hardness Tester User s Manual LHT-200 Portable Hardness Tester Contents CAUTION 5 1. SUMMARIZE.. 5 1.1 Measuring Principle Scope 5 1.2 The Hardness Value "L". 7 1.3 Main Features..8 1.4
More informationCONTENTS. Hardness Tester HLN-11A (1) Hardness Tester TH160 (5) Optional Impact Devices (8) Optional Support Rings (9) Hardness Tester TH154 (15)
CONTENTS Hardness Tester Hardness Tester HLN-A () Hardness Tester TH40 (3) Hardness Tester TH60 (5) Optional Impact Devices (8) Optional Support Rings (9) Hardness Tester TH30 (0) Hardness Tester TH32
More informationHARDNESS TESTER HARTIP 1800 OPERATION MANUAL
HARDNESS TESTER HARTIP 1800 OPERATION MANUAL CONTENTS 1. Forewords... 2 1.1. History... 2 1.2. Leeb Hardness Test (definition)... 2 1.3. Notation of Leeb s Hardness... 2 2. Features and Applications...
More informationUser s Manual. PCE-2800 Leeb Hardness Tester.
www.pce-industrial-needs.com Tursdale Technical Services Ltd Unit N12B Tursdale Business Park Co. Durham DH6 5PG United Kingdom Phone: +44 ( 0 ) 191 377 3398 Fax: +44 ( 0 ) 191 377 3357 info@tursdaletechnicalservices.co.uk
More informationInstruction Manual Ultrasonic Thickness gauge DC3020
Instruction Manual Ultrasonic Thickness gauge DC3020 V 7.11 CONTENTS 1.General Description... - 1-2.Technical Specifications... - 1-3. Standard Delivery... - 2-4. Overview the Display Unit... - 2-5. Keypad
More informationPortable Non-Destructive Metal Testing Instruments
Solutions since 1954 Portable Non-Destructive Metal Testing Instruments New Equotip Live Hardness Testing Solutions Equotip Live Leeb D Equotip Piccolo / Bambino 2 Equotip 550 Leeb Equotip 550 Portable
More informationUCI ASTM-A , DIN , JB-T
Ultrasonic Portable Hardness Tester UCI- 3000 ASTM-A1038-2005, DIN 50159-1-2008, JB-T9377-2010 www.worldoftest.com/ultrasonic-portable-hardness-tester-uci-3000 Advanced Ultrasonic Hardness Tester UCI 3000
More informationInstruction Manual Mobile digital Leeb Impact Hardness Tester
Sauter GmbH Ziegelei 1 D-72336 Balingen E-Mail: info@sauter.eu Tel.: +49-[0]7433-9933-199 Fax: +49-[0]7433-9933-149 Internet: www.sauter.eu Instruction Manual Mobile digital Leeb Impact Hardness Tester
More informationISU-300D ULTRASONIC THICKNESS GAUGE OPERATION MANUAL
MN-ISU-00D-E www.insize.com ISU-00D ULTRASONIC THICKNESS GAUGE OPERATION MANUAL Attention Specification Of Transducers In order to obtain good measurement precision, you need to clear away the rusty, sundry,
More informationHARTIP-3210 PORTABLE HARDNESS TESTER
HARTIP-3210 PORTABLE HARDNESS TESTER OPERATIONAL MANUAL BMS Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No: 7-9 Başakşehir / İSTANBUL-TURKEY
More information160 UTG-2841 UTG ISU 200C ISU 250C ISU-200D -P
+ Quotation 92 Ultrasonic Thickness Gauge / D-meter Make Dipel Time Model B 2 TT100 Range mm 1. 5 to 99 0. 75-300 Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm With Probe - 1 Probe Rs. 14500
More informationSADT HARDNESS TESTER HARTIP 1800
SINO AGE DEVELOPMENT TECHNOLOGY SADT HARDNESS TESTER HARTIP 1800 OPERATION MANUAL CONTENTS CONTENTS... 1 1. Forewords... 2 1.1. History... 2 1.2. Leeb Hardness Test (definition)... 2 2. Features and Applications...
More information160 UTG-2841 UTG ISU 200C ISU 250C ISU-200D -P
+ Quotation 92 Ultrasonic Thickness Gauge / D-meter Make Dipel Time Model B 2 TT100 Range mm 1. 5 to 99 0. 75-300 Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm With Probe - 1 Probe Rs. 14500
More informationQH7 User Manual. Portable Leeb / UCI Hardness Testers. P/N: QHD 701 ENG Rev. 01 November 2017
Portable Leeb / UCI Hardness Testers P/N: QHD 701 ENG Rev. 01 November 2017 Index Introduction Leeb Measuring principle (Leeb) VII Selecting the impact device VIII Impact device components XII Using the
More informationHARTIP-3000 PORTABLE HARDNESS TESTER
HARTIP-3000 PORTABLE HARDNESS TESTER OPERATIONAL MANUAL Bms Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 Başakşehir / İSTANBUL-TÜRKİYE
More informationISU-250C ULTRASONIC THICKNESS GAUGE OPERATION MANUAL
MN-ISU-0C-E www.insize.com ISU-0C ULTRASONIC THICKNESS GAUGE OPERATION MANUAL Attention Technical Specification In order to obtain good measurement precision, you need to clear away the rusty, sundry,
More informationHARTIP-3000 PORTABLE HARDNESS TESTER
PORTABLE HARDNESS TESTER OPERATIONAL MANUAL Bms Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 İkitelli / İSTANBUL-TÜRKİYE Phone : +90
More informationQuotation Ultrasonic Thickness Gauge - With 10% Discount Model Rs Page No
Quotation 110 Ultrasonic Thickness Gauge / D-meter Make Dipel Time Time Model B 2 TT100 Extra Probe for TT 100 Range mm 1. 5 to 99 0. 75-300 - Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm -
More informationQuotation. 110 Ultrasonic Thickness Gauge / D-meter Ultrasonic Thickness Gauge Transducers Insize Make
110 Ultrasonic Thickness Gauge / D-meter Quotation Make Dipel Time Time Model B 2 TT100 Extra Probe for TT 100 Range mm 1. 5 to 99 0. 75-300 - Least Count 0. 1~ 1.5 to 60 / 0. 2~ 60 to 99 mm 0. 1 mm -
More informationParameter Single Dual Thr u 0~80% Title. Measurement Mode. Reject -20 ~ ~ Port Type Operating Temperature -20~50
1 Ultrasonic Flaw Detector GUF500 Plus Measuring Range(mm) Vertical Linearity Horizontal Linearity 0 ~ 10000 3% 0.1% Measurement Mode Reject Pulse Displacement(μs) Single Dual Thr u 0~80% -20 ~ +3400 Sensitivity
More informationHardness Tester Micro-Vickers Type HM-100
Hardness Tester Micro-Vickers Type HM-100 Hardness tester according to ISO 6507 and JIS B7725. Micro-Vickers hardness tester with Vickers tests from HV 0.01 HV 1. Up to 3 objectives can be connected that
More informationPORTABLE INSTRUMENTS
PORTABLE INSTRUMENTS . FEATURED BY IMPRESSIONS v2 ADVANCED SOFTWARE APPLICATIONS INNOVATEST Europe BV Edition: Portable instruments 05-2016 Changes in products and/or product specifications can emerge
More informationUltrasonic Thickness Gauge. Operation Manual
Ultrasonic Thickness Gauge Operation Manual SA40 Contents 1. Overview 4 2. Keypad 4 3. LCD display 4 4. Calibration 5 5. Change velocity 5 6. Measuring velocity 5 7. Data memory and read 6 8. Optional
More informationDUROMETROS PORTATILES DE ALTA PRECISION
DUROMETROS PORTATILES DE ALTA PRECISION COMPUTEST SCX portable electronic hardness tester The proper solution for any hardness control issue DYNATEST SCX portable hardness tester HANDY ESATEST X portable
More informationE-2007 ISO 9001 ULTRASONIC THICKNESS GAUGE TT ULTRASONIC THICKNESS GAUGE OPTIONAL ACCESSORIES 29
E-2007 LEEB HARDNESS TESTER TH130/132/134 1 LEEB HARDNESS TESTER TH150/152/154 2 LEEB HARDNESS TESTER TH170 3 LEEB HARDNESS TESTER TH160 4 LEEB HARDNESS TESTER TH140 5 LEEB HARDNESS TESTER HLN-11A 6 LEEB
More informationWe have not only branch company in Europe, but also global net work of after-sales service with sufficient technical resources and maintenance.
TIME Group Inc. established in 1984, located in Beijing, China, is a high-tech leading manufacturer of Testing Instruments, welding machines and testing machines. Over 20 years, TIME Group Inc. is always
More informationP/N: QHDU 501 ENG Rev
P/N: QHDU 501 ENG Rev 01 2017 Chapter 1 First steps 1.1 Know the QH5 U 1 1.1.1 Front panel 1 1.1.2 Connectors 2 1.2 Install or replace batteries 3 1.3 Connecting the UCI probe 5 1.4 UCI probe components
More informationHARTIP-4100 PORTABLE HARDNESS TESTER
OPERATIONAL MANUAL HARTIP-4100 PORTABLE HARDNESS TESTER BMS Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 Başakşehir / İSTANBUL Tel :
More informationFG-7000L Digital Force Gauge Operation Manual
FG-7000L Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationAdvanced Test Equipment Rentals ATEC (2832) PANAMETRICS. 25DL Multi-Mode Ultrasonic Thickness Gage with Internal Datalogger
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) PANAMETRICS 25DL Multi-Mode Ultrasonic Thickness Gage with Internal Datalogger 25DL Easy to use Uses contact, delay
More informationQC3 User Manual. Coating Thickness Gauges. P/N: QCD 301 ENG Rev. 01 March 2014
Coating Thickness Gauges P/N: QCD 301 ENG Rev. 01 March 2014 Index Chapter 1 Chapter 2 Chapter 3 First steps 1.1 Know the QC3 1 1.1.1 Front panel 1 1.1.2 Connectors 2 1.2 Install and replace batteries
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationO P E R A T I O N A L MEGA-CHECK POCKET COATING THICKNESS METER M A N U A L
O P E R A T I O N A L MEGA-CHECK POCKET COATING THICKNESS METER M A N U A L TECHNICAL DATA Measuring Technique: Magnetic induction on iron and steel (ISO 2178) for MEGA-CHECK Pocket FE/FN Eddy current
More informationOPERATION & MAINTENANCE SPECIFICATIONS MANUAL 09 07
SCOPE This section is intended for the guidance of NDE personnel qualified in accordance with the requirements of M&NP Training and Qualification of Personnel. The inspection processes and procedures described
More informationHEIGHT GAUGE Hi_Cal & Hi_Gage ONE
HEIGHT GAUGE & Hi_Gage ONE Specially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
More informationMTG8 Material Thickness Gauge
MTG8 Material Thickness Gauge Conforms to the following standards : ASTM E797, EN 14127, EN15317 Page 1 of 6 With their ergonomic, rugged design, accurate and easy to use menus in multiple languages, the
More informationSPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationAUTOMATIC MICRO-HARDNESS TESTER ISOSCAN HV1 OD
742EV2601 AUTOMATIC MICRO-HARDNESS TESTER ISOSCAN HV1 OD Automatic optical-digital system for Vickers micro-hardness testing from HV0,01 to HV1 according to ISO 6507-2 Standards. Compliance with ASTM E384
More informationHM-100. Micro Vickers Hardness Testing Machines. Redesigned range now even better for making hardness measurements on the smallest specimens
Test Equipment and Seismometers Micro Vickers Hardness Testing Machines HM-100 Redesigned range now even better for making hardness measurements on the smallest specimens Distributed by: Quality Solutions
More informationMTG6 Material Thickness Gauge
MTG6 Material Thickness Gauge Conforms to the following standards : ASTM E797, EN 14127, EN15317 Page 1 of 5 With their ergonomic, rugged design, accurate and easy to use menus in multiple languages, the
More information400 SERIES. Micro-Vickers Hardness Testers
400 SERIES Micro-Vickers Hardness Testers MICRO-VICKERS HARDNESS TESTERS 400 SERIES 400 ANALOGUE 400 DIGITAL MICRO-VICKERS & KNOOP MICRO-VICKERS & KNOOP 2 VICKERS HARDNESS TESTING FEATURES 400A SERIES
More informationQuick Guide v. 3.0 Advanced model
Ultrasonic Thickness Gage Quick Guide v. 3.0 Advanced model Introduction The PosiTector UTG is a hand-held Ultrasonic Thickness Gage that uses the non-destructive ultrasonic pulse-echo principle to measure
More informationTR-200 Surface roughness tester
TR-200 TR-200 Surface roughness tester 2 www.innovatest-europe.com Features High performance instrument Easy to operate menu software Graphical display on large LCD 13 different roughness parameters Pick-up
More informationManual Ultrasonic Hardness Tester PCE-5000
PCE Americas Inc. 711 Commerce Way Suite 8 Jupiter FL-33458 USA From outside US: +1 Tel: (561) 320-9162 Fax: (561) 320-9176 info@pce-americas.com PCE Instruments UK Ltd. Units 12/13 Southpoint Business
More informationULTRASONIC TRANSIT TIME FLOWMETERS TTFM100-NG SERIES
Water treatment, slurry and process water pumping; Flow balancing; Hydro-electric, cooling, anti-fire stations; ULTRASONIC TRANSIT TIME FLOWMETERS TTFM100-NG SERIES The Transit Time Flow Meter of TTFM100
More informationP/N: QSD 301 ENG Rev
I P/N: QSD 301 ENG Rev 3 2012 Chapter 1 Chapter 2 Chapter 3 First Steps 1.1 Know the QS5 1 1.1.1 Front panel 1 1.1.2 Connectors 2 1.2 Install or replace batteries 3 1.3 Connecting the transducer 5 1.4
More informationHEIGHT GAUGE Hi_Cal 150 / 300
HEIGHT GAUGE 150 / 300 Especially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
More informationFG-7000 Digital Force Gauge Operation Manual
FG-7000 Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationANEMOMETER DIGITAL ANEMOMETER AM-4812
ANEMOMETER DIGITAL ANEMOMETER AM-4812 Model:AM4812 Measuring: wind speed 0.4-30.0m/s 1.4-108.0km/h 80-5910ft/min 0.8-59.3 knots Accuracy: ±2%n+2d Resolution:0.1/1 Display: LCD display Power supply:1x9v
More informationPRODUCT NEWS. Wizhard Hardness Tester. Digital Durometers. DFS-R Force Gauges. Series 810 See page 448. Series 811 See page 456
PRODUCT NEWS Wizhard Hardness Tester Series 810 See page 448 Digital Durometers Series 811 See page 456 DFS-R Force Gauges Series DFS-R See page 465 Test Equipment and Seismometers Rockwell/Rockwell Superficial/
More informationNEXUS 4000 SERIES. Vickers Hardness Testers
NEXUS 4000 SERIES Vickers Hardness Testers VICKERS HARDNESS TESTERS NEXUS 4000 SERIES NEXUS 4000 LOAD CELL, CLOSED LOOP SYSTEM 1 VICKERS HARDNESS TESTING FEATURES High-end Vickers/Knoop/Brinell tester
More informationAUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
More informationSADT ULTRASONIC THICKNESS GAUGE SA40
SINO AGE DEVELOPMENT TECHNOLOGY SADT ULTRASONIC THICKNESS GAUGE SA40 OPERATION MANUAL Contents 1. Overview... 2 2. Keypad... 2 3. LCD display... 2 4. Calibration... 3 5. Change velocity... 3 6. Measuring
More informationSURFACE ROUGHNESS TESTER TR100/110
SURFACE ROUGHNESS TESTER TR100/110 Pocket-size & economical price Large measuring range suitable for most materials Measures flat, outer cylinder and sloping surface Both Ra and Rz parameters in one instrument
More informationSurface Roughness Testing
Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the
More informationEHC-03 Ultrasonic Thickness Gage
QUICK START GUIDE EHC-03 Ultrasonic Thickness Gage Software version x.x Liability Ultrasonic testing is a function of using the proper equipment (electronics, transducer, cable and couplant combination)
More informationQSV User Manual. Ultrasonic Velocity Gauge. P/N: QSD 101 ENG Rev
Ultrasonic Velocity Gauge P/N: QSD 101 ENG Rev 2 2012 Index Chapter 1 Chapter 2 Chapter 3 QSV User Manual First Steps 1.1 Know the QSV 1 1.1.1 Front panel 1 1.1.2 Connectors 2 1.2 Install or replace batteries
More informationTKM-459 PORTABLE HARDNESS TESTER
PORTABLE HARDNESS TESTER OPERATIONAL MANUAL Bms Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 İkitelli / İSTANBUL-TÜRKİYE Phone : +90
More informationNEXUS 4000 Series Vickers hardness tester
NEXUS 4000 SERIES NEXUS 4000 Series Vickers hardness tester Features High-end Vickers/Knoop/Brinell tester with low and high force ranging from 10gf/0.098N to 62.5kgf/61.2N. Closed Loop, Load Cell, Force
More informationBearing (Shock Pulse) Condition Analyzer -110
Bearing (Shock Pulse) Condition Analyzer -110 *Direct indication of machine condition in terms of good - reduced - bad. *Mechanical Condition of bearings *Lubrication condition of bearings *Damage severity
More informationThickness Gauge Transducers & Accessories - Price List Date: 01/01/18
Thickness Gauge Transducers & Accessories - Price List Date: 01/01/18 Dual Transducer Reference Chart Frequency & Disks Note: The frequency and crystal diameter are stamped and sorted according to color,
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationCHECK LINE. Flaw Detectors, Accessories & Probes - Price List Date: 10/01/11
CHECK LINE Flaw Detectors, Accessories & Probes - Price List Date: 10/01/11 Models: Connector Type Part # Price US DFX-615 BNC Z-211-0001 7195.00 DFX-615 LEMO Z-211-0002 7195.00 DFX-625 BNC Z-212-0001
More informationSHIMPO INSTRUMENTS. FG-7000T Digital Torque Gauge Operation Manual
FG-7000T Digital Torque Gauge Operation Manual SHIMPO INSTRUMENTS Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the
More informationPartners in Precision
Bowers Eclipse Equipment Shanghai Co., Ltd. 8th Bld, No. 178 Chengjian Rd, Shanghai, 201108, China Tel: +86-21-64348600 Fax: +86-21-64346488 Email: sales@bowers-shanghai.com Website: bowers-shanghai.com
More informationKATflow 200 Hand-Held Clamp-On Ultrasonic Flowmeter
Lightweight and robust hand-held flowmeter with one measurement channel and graphic LCD display For commonly used pipe materials and diameters from 10 mm to over 3.0 m Intuitive menu, Setup Wizard and
More informationVICKERS HARDNESS TESTER. HBS HBW Kc
ICKERS HARDNESS TESTER H HK HBS HBW Kc Clean Touch Panel coordinated with highly integrated PC board. Measuring procedures, conditions and data are displayed clearly. (F-800 Series) Accurate light load
More informationMitutoyo General Catalog
Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
More information-Direct.com FG-3000 Digital Force Gauge Operation Manual
FG-3000 Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationDual Type Coating Thickness Tester LZ-990. Operating Manual
Dual Type Coating Thickness Tester LZ-990 Operating Manual Coating Thickness Tester Safety Precautions The Coating Thickness Tester may cause damage to objects being handled if the precautions are not
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More information373 Series Coating Thickness Testers LE-373/LH-373/LZ-373. Operating Manual
373 Series Coating Thickness Testers LE-373/LH-373/LZ-373 Operating Manual Coating Thickness Tester Safety Precautions Be sure to carefully follow all safety precautions. Carefully read operating manual.
More informationOPERATION MANUAL DAKOTA ULTRASONICS. Material & Coating Thickness Gauge
OPERATION MANUAL DAKOTA ULTRASONICS CMX Material & Coating Thickness Gauge P/N P-170-0002 Rev 1.30, April 2008 CHAPTER ONE INTRODUCTION...1 CHAPTER TWO QUICK STARTUP GUIDE...2 CHAPTER THREE KEYBOARD,
More informationOPERATION MANUAL DAKOTA ULTRASONICS. Material & Coating Thickness Gauge
OPERATION MANUAL DAKOTA ULTRASONICS CMX DL Material & Coating Thickness Gauge P/N P-171-0002 Rev 1.30, April 2008 CHAPTER ONE INTRODUCTION...1 CHAPTER TWO QUICK STARTUP GUIDE...2 CHAPTER THREE KEYBOARD,
More informationTHE TECHNOLOGY BEHIND THE MEASUREMENT
THE TECHNOLOGY BEHIND THE MEASUREMENT The USCX series non-invasive flowmeters work on the transit time ultrasonic principle. This involves sending and receiving ultrasonic pulses from a pair of sensors
More informationTTC Series Torque Tool Tester Operation Manual
TTC Series Torque Tool Tester Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationPaint Test Equipment. Eban 4000 Coating Thickness Meter Data Sheet
Paint Test Equipment Eban 4000 Coating Thickness Meter Data Sheet Coating Thickness Gloss Porosity Adhesion Surface Roughness Surface Cleanliness Climatic Conditions Electrostatic Inspectors Accessories
More informationTQC FE/NFE COATING THICKNESS GAUGE LD0800
TQC FE/NFE COATING THICKNESS GAUGE LD0800 1 PRODUCT DESCRIPTION This handy, robust and easy to use TQC coating thickness gauge is ideal for measurement tasks in various industries and paint applications.
More informationSPECIFICATIONS HAND HELD PARTICLE COUNTER KC Higashimotomachi, Kokubunji, Tokyo , Japan
SPECIFICATIONS HAND HELD PARTICLE COUNTER KC-51 3-20-41 Higashimotomachi, Kokubunji, Tokyo 185-8533, Japan No. 10015-2E 15-06 Printed in Japan Outline The hand held particle counter KC-51 is designed to
More informationAysix 200 Hand-Held Flow Meter
Aysix 200 Hand-Held Flow Meter Lightweight and robust hand-held flow meter with one measurement channel and graphic LCD display. The Aysix clamp-on ultrasonic flow meters work on the transit-time method.
More informationGA-12. madur Polska sp. z o.o.
www.madur.com is madur s smallest gas analyser - hand-held, equipped with up to 3 EC cells. Small dimensions and light weight makes it very convenient for technicians that use analyser on a daily basis.
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationNEXUS 8000 SERIES. Universal hardness tester
NEXUS 8000 SERIES Universal hardness tester NEXUS 8000 Series Universal hardness tester 15 industrial touch screen, embedded high performance PC with two SSD drives for enhanced reliability IMPRESSIONS
More informationCombined Hardness Tester NOVOTEST T-UD3
Combined Hardness Tester NOVOTEST T-UD3 Operating Manual 2018 CONTENT 1 DESCRIPTION AND OPERATION OF THE DEVICE AND ITS COMPONENTS... 5 1.1 The purpose of the device... 5 1.2 Technical characteristics
More informationHeight Gauges Pages Data Processing Height Gauges Pages
Height Gauges Height Gauges Pages 232-240 Data Processing Height Gauges Pages 241-244 for sale to the United Kingdom only. All products are intended to be sold to coercial customers. Therefore VAT is not
More informationDM 8. Vickers, Knoop
DM 8 Vickers, Knoop DM 8 - The models DM 8 DM 8 SEMI DM 8 AUTO Manual focus - Manual reading Manual focus - Automatic reading Automatic focus - Automatic reading Automatic hardness tester for micro and
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationCL 5. Operating Manual. Ident-Nr Issue 01
CL 5 Operating Manual Ident-Nr. 021-002-296 Issue 01 Issue 01, 04/2005 applies to software version XX.04.XX Contents 1 General Information... 1-1 1.1 Supplying Power to the CL 5... 1-2 1.2 Powering On
More informationFG-3000R Digital Force Gauge Operation Manual
FG-3000R Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationFG-3000 Digital Force Gauge Operation Manual
FG-3000 Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationDBC 150/650 Series. Druck Dry Block Temperature Calibrators. GE Sensing. Features
Features Ranges from -45 C to 650 C Measures reference probe, RTDs, T/Cs, ma, mv and ohms Rapid heating, cooling and settling Ramp, step and preset functions Reads set temperature and device output simultaneously
More information