mm range nonius mm/inch mm range nonius mm/inch

Transcription

1 Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard model Satin chrome finish, hardened. 4-way measurements. Backside Metric ISO and Withworth screw table. Automatic lock mm range nonius mm/inch mm range nonius mm/inch Vernier caliper standard model Satin chrome finish, hardened. 4-way measurements. Backside Metric ISO and Withworth screw table. Screw lock mm range nonius mm/inch mm range nonius mm/inch Precision vernier caliper with screw lock DIN 862 Made of stainless steel, satin chrome finish, hardened. 4-way measurements. Backside Metric ISO and Withworth screw table. Nonius above 1/20-39, nonius blow 1/128" mm range nonius mm/inch mm range nonius mm/inch mm range nonius mm/inch Precision vernier caliper with screw lock DIN 862 Made of stainless steel, satin chrome finish, hardened. 4-way measurements. Backside Metric ISO and Withworth screw table. Nonius above 1/50-49, nonius below 1/1000" mm range nonius mm/inch mm range nonius mm/inch mm range nonius mm/inch Precision vernier caliper with fine adjustment With fine adjustment and lock screw. Satin chrome finished, hardened with depth gauge. 4-way measurement mm range nonius mm/inch mm range nonius mm/inch Top Pag. 00/08

2 Precision vernier caliper with set screw TOP DIN 862 With lock set screw. Made of stainless steel satin chrome finish, hardened. 4-way measurement. With higher sliderails. Backside Metric ISO and Withworth screw table. Nonius above 1/20-39, nonius below 1/128" mm range nonius mm/inch mm range nonius mm/inch mm range nonius mm/inch Vernier caliper brass DIN 862 Non magnetic, special developed for measuring at heavy magnetic areas or magnetic workpieces. With lock screw mm range nonius mm/inch Dial caliper shockproof DIN way measuring. MM/INCH Backside Metric ISO and Withworth screw table. Reading 0,02 mm 1x round 2 mm mm jaw 40 / 20 mm mm jaw 50 / 24 mm mm jaw 60 / 25 mm Dial caliper shockproof DIN 862 As type above only difference is the reading. Reading 0,01 mm 1x round 1 mm mm jaw 40 / 20 mm mm jaw 50 / 24 mm mm jaw 60 / 25 mm Vernier caliper fiberglass plastic Wiha CaliMax Non-metal high-tech material with 50% fiberglass. Reading 0,1 mm / 1/64". Green/white reading at the nonius P 150 mm jaw 40 / 20 mm Digital vernier caliper with data output DIN way measuring. MM/INCH Accuracy 0,03 mm Data exit RB 2 Battery 1,5V V357 (number ) mm jaw 40 / 21 mm

3 Digital vernier caliper with Bluetooth IP67 DIN 862 Inductive measuring systeem IP 67 protection, water and dust proof. 4-way measuring. MM/INCH Accuracy 0,03 mm mm jaw 40 / 21 mm mm jaw 50 / 24 mm mm jaw 60 / 26 mm mm jaw 40 / 21 mm With Ø1,6 mm round depth bar. Digital vernier caliper with carbide measuring faces IP 67 DIN 862 Equiped with a Sylvac-Electronic measuring unit. Carbide measuring faces. IP 67 protection, water and dust proof. 4-way measuring. MM/INCH Accuracy 0,03 mm ABS Function mm jaw 40 / 21 mm mm jaw 50 / 24 mm mm jaw 60 / 26 mm Digital vernier caliper Non Magnetic DIN 862 Made of stainless non magnetic steel. With round Ø3 mm depth bar. 4-way measuring. MM/INCH Accuracy 0,03 mm HOLD Function. Data-exit RB mm jaw 40 / 21 mm mm jaw 50 / 24 mm mm jaw 60 / 26 mm Digital vernier caliper IP 54 Absolute-System DIN 862 No limit for moving tempo. Scale with glass rail for precision sampling. Usable without roll (fitting included). 4-way measuring. MM/INCH HOLD Function, Absolut-system Accuracy 150 & 200 mm 0,02 mm and at 300 mm 0,03 mm. Data-exit RB mm jaw 40 / 21 mm Bluetooth data zender optioneel mm jaw 50 / 24 mm mm jaw 60 / 26 mm Top

4 Digital steel wire vernier caliper. Special caliper with large-sized measuring faces. Made of stainless steel, hardened and with metal casing. Accuracy 0,03 mm HOLD Function. Data-exit RB mm a = 27 mm b = 25 mm d = 16 mm Control caliper standard version DIN 862 Made of stainless steel. Scale and nonius satin chrome finish. With 10 mm points. Monoblock type. Reading 0,05 mm + 1/128" In wooden case mm jaw 60 / 40 mm mm jaw 80 / 40 mm mm jaw 100 / 40 mm Control caliper with fine adjustment DIN 862 Made of stainless steel. Scale and nonius satin chrome finish. With 10 mm points. Monoblock type. Reading 0,05 mm + 1/128" In wooden case mm jaw 60 / 40 mm mm jaw 80 / 40 mm mm jaw 100 / 40 mm Control caliper with fine adjustment Without points. Made of stainless steel. Scale and nonius satin chrome finish. With fine adjustment and lock screw. Works standard. In transport box. Reading 1/20 = 0,05 or 1/50 = 0,02 (330916) mm jaw 90 mm mm jaw 90 mm mm jaw 150 mm mm jaw 120 mm mm jaw 150 mm mm jaw 200 mm mm jaw 200 mm All DIN control calipers can be supplied optional (additional cost) with a certificate. The DIN version will be certified according to VDI/VDE/DGQ 2618 norm. Works standard control calipers can be certified according to the works standard. Calibration will be done external and will extend lead time with approx. one week

5 Digital control caliper with fine adjustment. Without points. Accuracy 0,03 mm. With fine adjustment and screw lock. Works standard. In transport box. Reading 0,01 mm + 0,0005" HOLD Function. Data exit RB mm jaw 75 mm mm jaw 90 mm Digital control caliper with fine adjustment. With points. Accuracy 0,03 mm. With fine adjustment and screw lock. Works standard. In transport box. Reading 0,01 mm + 0,0005" HOLD Function. Data exit RB mm jaw 60 / 38 mm mm jaw 90 / 45 mm Digital control caliper with fine adjustment IP66 With magnetic measuring system. Fine adjustment. IP 66 protection. Water and dust proof. Works standard. In transport box. Reading 0,01 mm + 0,0005" HOLD Function. PRESET function. IMPORTANT NOTE: This caliper need to be kept away from strong magnets oor magnetic areas!! Accuracy mm jaw 90 / 45 mm 0,05 mm mm jaw 150 / 56 mm 0,05 mm mm jaw 150 / 56 mm 0,06 mm mm jaw 150 / 67 mm 0,07 mm Batteries for digital calipers Dimensions SR 44 Ø11,6 x 5,4 mm 1,5 volt (V357/V303) CR2025 Duracell Ø20 x 2,5mm 3 volt Depth vernier caliper DIN 862 with fine adjustment Made of stainless steel. Scale and nonius satin chrome finish. Reading & ,02 mm = 1/20 Reading & ,05 mm = 1/50 Base mm 100 mm mm 150 mm mm 100 mm mm 150 mm

6 Digital depth vernier caliper IP 67 Equiped with a Sylvac-Electronic measuring unit. IP 67 protection, water and dust proof. ABS Function. Absolute system. Base mm 100 mm mm 100 mm mm 150 mm Outside micrometer DIN 863 With carbide measuring faces. Coated frame. Scale chrome finish. Spindle Ø6,5 mm, thread pitch 0,5 mm. With ratched. Scale 0,01 mm. Accuracy according to DIN 863 In protective case. C mm mm mm mm mm mm mm mm mm mm mm mm mm 168 Outside micrometer set DIN 863 As above but packed in wooden case S mm 4 pcs S mm 4 pcs S mm 4 pcs S mm 6 pcs S mm 6 pcs S mm 12 pcs

7 Outside micrometer DIN 863 With carbide measuring faces. Frame metalic coated. Scale chrome finish. Spindle Ø6,5 mm, thread pitch 0,5 mm. With ratched. Scale 0,01 mm. Accuracy according to DIN 863 In protective case. C mm C 0-25 mm C mm C mm C mm C mm C mm C mm C mm 107 Outside micrometer set DIN 863 As above but packed in wooden case CS mm 4 pcs. Nummer Meetbereik Aantal CS mm 6 pcs. Nummer Meetbereik Aantal CS mm 4 pcs. Outside micrometer DIN 863 Anti-magnetic Anti-magnetic. Ratched with friction timble. Special hardened composit measuring faces. Frame chrome finish. Spindle Ø6,5 mm, thread pitch 0,5 mm. Scale 0,01 mm. In protective case. C mm NM 0-25 mm NM mm 32 Digital outside micrometer IP 54 DIN 863 With auto power Off function. Frame coated. Steel chrome finish. Carbide measuring faces. With ratched adjustment. Reading 0,001 m, accuracy according to DIN 863 Equiped with zero setting. In protective case. On/Off function. Battery SR44 V357 1,5V (number ) B mm D 0-25 mm D mm D mm D mm

8 Micrometer holder With adjustable angle. Central clamp For micrometers up to 100 mm For micrometers up to 200 mm For micrometers up to 300 mm Precision inside micrometer DIN 863/1 Hardened spindle. Satin chrome finish. Tread lead 0,5 mm. Reading 0,01 mm. Drum Ø20 mm. In protective case mm mm mm mm mm mm mm mm mm mm mm mm mm Precision inside micrometer setdin 863/1 As above but in wooden case mm 250 mm 450 mm 850 mm 1250 mm 1450 mm pcs. pcs. pcs. pcs. pcs. pcs. Dial indicator Metal casing. Accuracy according to works standard. With tolerance marks. Standard stem 8 h6. Dial face rotable by outer ring. Accuracy 17µm Reading 0,01 mm. In protective case. Ring Ø mm 56 mm

9 Dial indicator with magnetic support-set in box Magnetic support with fine adjustment. For dial indicators with a stem of Ø8 mm. Chromed rods. Total height 281 mm. Prismatic magnetic base with On/Off switch. Base M10. Magnetic holding force 60 kg. Including dial indicator Dial indicator with magnetic base. Measuring range 10 mm. Dial indicator with magnetic support-set in box Magnetic support with fine adjustment. With mechanical central clamping. For dial indicators with a stem of Ø8 mm. with dovetail guides. Total height 375 mm. Prismatic magnetic base with On/Off switch. Base M8. Magnetic holding force 80 kg. Including dial indicator Dial indicator with magnetic base. Measuring range 10 mm. Magnetic dial support Magnetic support with fine adjustment. For dial indicators with a stem of Ø8 mm. Chromed rods. Total height 281 mm. Prismatic magnetic base with On/Off switch. Base M10. Magnetic holding force 60 kg Magnetic dail support 60 kg. Magnetic dial support Magnetic support with fine adjustment. With mechanical central clamping. For dial indicators with a stem of Ø8 mm. with dovetail guides. Total height 375 mm. Prismatic magnetic base with On/Off switch. Base M8. Magnetic holding force 80 kg Magnetic dail support 80 kg. Digital dial indicator Ø 57 mm. With digital LCD display. Standard stem 8 h6. On/Off function. MM/Inch unit. Data exit RB ,7 mm 20 µm accuracy 25,0 mm 25 µm accuracy

10 Digital dial indicator ABS - PRESET Function Ø 57 mm. With digital LCD display. Reading 0,001 mm or 0,00005". Standard stem 8 h6. On/Off function. MM/Inch unit. ABS function. Preset. Measuring direction reversible ,5 mm 5 µm accuracy reading 0,001 mm ,5 mm 20 µm accuracy reading 0,01 mm mm 20 µm accuracy reading 0,01 mm Digital dial indicator with rotable display Ø 61 mm. With 270 rotable LCD display. The LCD display is digital and analog as well. Reading 0,001 mm or 0,00005". Measuring direction reversible. Standard stem 8 h6. On/Off function. MM/Inch unit. Absolut system. Preset. Data exit RB ,5 mm 10 µm accuracy Digital thickness gauge LCD display Rod and disc made of stainless steel. Frame made of case iron. Spring closed. Quick snap (yellow button). On/Off function. MM/Inch unit. Battery SR44 V357 1,5V (number ) mm Accuracy 0,02 mm Digital thickness gauge LCD display, accuracy 0,04 mm. Rod and disc made of stainless steel. Frame made of case iron. Spring closed. Quick snap (yellow button). On/Off function. MM/Inch unit. Battery SR44 V357 1,5V (number ) Depth mm 25 mm mm 50 mm

11 Internal measuring instrument set mm with dial indicator Internal measuring instruments as set with satin chrome finish. Complete with dial indicator 0,01 mm reading. Repeat accuracy of 0,005 mm. For use in workshops. Supplied in box with foam insert. Measuring rods with hardened steel faces. Contains: measuring faces 18-35, en mm. Hardened measuring points Ø3,5 M3,5, Ø5,3 M6, Ø6 Analog dial indicator 10 mm x 0,01 mm mm Internal measuring instrument set mm with digital dial indicator Internal measuring instruments as set with satin chrome finish. Complete with dial indicator 0,01 mm reading. Repeat accuracy of 0,01 mm. For use in workshops. Supplied in box with foam insert. Measuring rods with hardened steel faces. Contains: measuring faces 18-35, en mm. Hardened measuring points Ø3,5 M3,5, Ø5,3 M6, Ø6 Digital dial indicator 10 mm x 0,01 mm mm Bluetooth data transmission device for RB 6 For use in combination with digital calipers with RB 6 data output. Connection with PC and a bluetooth device. Up to 10 meter valid distance. Data transmission with sound notice Bluetooth RB 6 data transmitter Digital display for absolute measuring systems with digital data output RB 6 Equiped with a connector RB 6 and Micro-B. Display in MM/Inch/frac. Backside with a magnetic block. Battery 2 x 3V CR 2032 (number ) Cable approx. 2 meter. On/Off switch. HOLD function. PRESET Digitale display RB 6 output

12 USB interface for PC connection Measuring value can be transfered directly with the USB interface to the PC and saved as text or Excel chart. Data entry by enter key or foot switch number (330957). Supplied including driver RB 6 interface Cable length 140 cm RB 4 interface Cable length 200 cm RB 4.1 interface Cable length 200 cm RB 5 interface Cable length 245 cm Accessories for PC connection. Connection cables for USB interface Connection cable RB 5 Cable length 100 cm Connection cable RB 2 Cable length 40 cm Connection cable RB 4 Cable length 100 cm External switch Foot switch Measuring sets Measuring tool set 4-pieces in solid case Contains: 1 x Vernier caliper with autolock DIN 862 Nonius 1/20. Length 150 mm (number ) (or lock screw number ) 1 x Micrometer 0-25 mm satin chrome. 1 x Bevelled edge 100x70mm DIN 875/1 1 x Steel rule 150 mm/mm reading Inox In solid case 24,5x12,5x5 cm Measuring tool set 4-pieces Measuring tool set 4-pieces Measuring tool set 6-pieces in solid case Contains: 1 x Vernier caliper with autolock DIN 862 Nonius 1/20. Length 150 mm (330972) or digital vernier caliper (330973) 1 x Micrometer 0-25 mm satin chrome. 1 x Bevelled edge 100x70mm DIN 875/1 1 x Steel rule 150 mm/mm reading Inox 1 x Pknife straight edge 100 mm DIN 874/0 1 x Spring divider 150mm with fine adjustment. In aluminium protective case Measuring tool set 6-pieces Measuring tool set 6-pieces with digital vernier caliper Other measuring tool sets on request available