SPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
|
|
- Job Howard
- 5 years ago
- Views:
Transcription
1 Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system Programmable Zoom Lens (20-130x) Programmable stage and lighting Delivery, installation, calibration and training included Pictured stand is not included Only 16,995 + VAT Save over 4,000 Non contact measurement Affordable, easy to use feature packed On-site demonstration available Other larger measuring capacities available Optional touch probe and rotary units available
2 Ultra Digital Micrometers DIN 863 Insulated pads Large LCD display Inch/metric direct conversion IP54 rating ON/OFF function Tungsten carbide anvils Zero set in any position Ratchet stop ABS/INC reversible mm/ resolution Preset facility Spindle clamps RS232 output Ultra Digital Micrometers With Special Anvils Generaly as per standard digital micrometers Supplied with 7 interchangeable Code No Range List /25 (mm) /50 (mm) /75 (mm) /100 (mm) /125 (mm) /150 (mm) Code No Range (mm) Resolution (mm) List Ultra Internal 3 Point Bore Micrometer Sets DIN 863 Tungsten carbide tipped faces Ratchet Delivered in a box Setting rings and extensions included Code No Range List /25 (mm) /50 (mm) Ultra Imperial Mechanical Micrometers DIN 863 Satin chrome Tungsten carbide tips Spindle clamp Standard Ratchet Code No 0-1" x " Range (Inches) Resolution (Inches) Insulation pads Delivered in case with setting standards from 1-2 List Z Z Z Z
3 Leitech 2008 AUTUMN / WINTER Measure thread depth and size in one operation Use in the same way as a normal double ended screw plug gauge Telescopic measurement sleeve 0.5 mm graduation High resolution 0.1 mm available on request Locking device allows thread depth to be preset or locked at measured depth (Hi-res only). Inserts fully interchangeable and replaceable All sizes available only standard ones detailed below Please call for other sizes at special prices Thread MeasuRING system UNC ANSI B1.2 2B Code No Thd Depth Size List mm mm mm mm mm mm mm 1/ mm 5/ mm 3/ mm 7/ mm 1/ UNF ANSI B1.2 Code No Thd Depth Size List mm mm mm mm mm mm mm 1/ mm 5/ mm 3/ mm 7/ mm 1/ METRIC ISO 6H Code No Thd Depth Size mm M4 x mm M4 x mm M5x mm M5 x mm M5 x mm M6 x mm M6 x mm M8 x mm M8 x mm M8 x mm M10 x mm M10 x mm M10 x mm M10 x mm M12 x mm M12 x mm M12 x mm M12 x
4 Novastrobe DBX KIT Rechargable batteries Hand held Digital stroboscope Large LCD display 30-40,000 flashes/minute Tachometer Mode 5-200,000 RPM Supplied in carry case with spare lamp Code No. List Battery powered Hand held non contact tachometer 5 digit clear LCD display Operates up to 915 mm from reflective target tape Ergonomic non slip design Range 5 99,999 rpm Accurate +/- 1 digit Auto ranging resolution rpm Max/Min and last reading memory Weight 210 g Complete with reflective tape and padded carry case Pocket Tach 99 Code No. List price Monarch Portable Tacho meters AND STROBOSCOPES Andilog Force Gauges Digital Centor First Force Gauge Simple, robust and easy to use force measurement gauge Can be used in tension or compression Metal casing with elastomer overmould for protection Rechargeable batteries Tare function Carry case & charger Code No. Capacity (N) Resolution (N) List CNR FT CNR FT CNR FT Code No Capacity (N) Resolution (N) List CNREA CNREA CNREA CNREA CNREA CNREA CNREA Digital Centor Easy Force Gauge Large graphic display Simultaneous display of current and peak values Bar graph display Back light Accuracy 0.1% of full scale Programmable RS232 output Carry case and charger
5 Hommelwerke T500 Entry level unit Rechargeable battery Skidded stylus general purpose Measures and displays: Ra, Rt, Rmax, Rz, Pc, Rpk, Rk, Rvk, Mr1, Mr2 Clear LCD display Easy to use thumbwheel operation Wide range of optional accessories and styli available Please ask for more details Portable Surface Roughness Testers Ask For A No Obligation Demonstration T1000 Portable and robust surface measuring system Mains rechargeable batteries Large clear LCD display Integrated printer for measured results and profile data Skidded stylus Stylus can also be used at 90 for measurement of journals and awkward places Stores 5 programs 50 surface finish parameters Tolerance indication for results Wide range of optional accessories and styli available Please ask for more details Code No. List T500 1,395 1, T1000 3,495 2,995.00
6 Indicating Snap Gauge High precision cast steel body Precision hardened and lapped faces Easy to handle Excellent repeatability 8mm dial gauge bore Supplied without indicator (see below) Code No Range (mm) List Micro-Snap Gauges High quality cast steel body Precision hardened and lapped faces Sprung loaded anvil for precision measurement 8mm dial gauge bore Supplied without indicator (see below) Code No Range (mm) List Dial Gauges for use with indicating and micro-snap gauges Code No Type Resolution List Mechanical 0.01mm Mechanical Digital /0.01mm
7 UNITEST Concentricity Tester Bench mounted for centreless workpieces An adaptable unit for checking concentricity and runout on a range of cylindrical components without centres. The system incorporates a sprung loaded workpiece clamping system and has an anvil which is adjustable for both length and height. Code No List Price Ultra Digital Calipers Inch/ mm direct conversion Hardened stainless steel Manufactured to Din 862 Resolution 0.01 mm / way measurement Depth bar Zero facility Supplied in protective case See table below for extra features Features 30mm diameter precision rollers Hardened steel roller grooves Hand wheel operated drive Hard chromed bars for sliding measuring stand Two measuring stands for dial test indicators Dial test indicator mounting holes 8mm diameter Single measuring stand base with inside thread M6 Delivered in individual packages without dial test indicators QUALITY AT A LOW PRICE Code No Range Abs Function Data Output Large Display Auto Off Ip Rating List Price s 6 / 150 mm sip 6 / 150 mm s 8 / 200 mm s 12 / 300 mm s 6 / 150 mm abs 6 / 150 mm
8 Accurate Type C Snap Gauges Code No Range List Price c 0-6 mm c 6-13 mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm c mm All prices exclude VAT and carriage Promotion ends Prices Whilst Stocks Last Distributor: Hardened and ground anvils Stress relieved cast iron frame Easy to set Durable and robust Conforms to ISO Type A and U snap gauges available please ask for details Technical Specifications Parallelism 3 microns 38 mm 4 microns 89 mm 5 microns 300 mm Anvil flatness 1.5 microns ORDER ORDER NOW NOW BY PHONE: BY PHONE: FAX: 241 FAX: OR
Sliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationMICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
More informationElectronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationHeightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
More informationMetrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers
800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS
More informationEvery tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
More informationAUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationPrecision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
More information7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationd for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
More informationHorizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium
410 Horizon Premium Length Measuring & Setting Instrument The new Trimos Horizon Premium Length Measuring and Setting Instrument fulfills todays requirements of high accuracy quality control equipment.
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
More informationELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
More informationV-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
More informationSURFACE ROUGHNESS TESTER TR100/110
SURFACE ROUGHNESS TESTER TR100/110 Pocket-size & economical price Large measuring range suitable for most materials Measures flat, outer cylinder and sloping surface Both Ra and Rz parameters in one instrument
More informationMW-2012E PRODUCT CATALOGUE 12/13. Partners in Precision INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE
MW-2012E PRODUCT CATALOGUE 12/13 INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE MOORE & WRIGHT A Brief History... Founded in 1906 by innovative young engineer, Frank
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationSAVER ZONE WINTER FLYER 2014 SUPER BORE GAUGE SET BORE GAUGE ABSOLUTE DIGIMATIC CALIPER. Quality products from a brand you can trust.
WINTER FLYER 2014 Prices in effect from Jan. 2 to Apr. 30, 2014 or as otherwise noted, while quantities last. Some items may not be exactly as shown. Distributed by BORE GAUGE SET BORE GAUGE Gauge stem
More information102 Precision Measurement
102 Precision Measurement 4KU90 4KU86 4KU87 Outside Micrometers Quickly and easily adjusts to zero Features microfine graduations on satin chrome finish and carbide-tipped measuring faces. Ratchet stop
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationNew Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.
Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer
More informationTR-200 Surface roughness tester
TR-200 TR-200 Surface roughness tester 2 www.innovatest-europe.com Features High performance instrument Easy to operate menu software Graphical display on large LCD 13 different roughness parameters Pick-up
More informationSurface Roughness Testing L-1
www.dmv-uk.com Surface Roughness Testing L-1 Roughness Parameters Commonly Used in Short Mean roughness Ra (ISO 4287, DIN 4768) The mean roughness Ra matches the arithmetical mean of the absolute values
More informationMetrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
More informationS_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
More informationAuxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
More informationALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Partners in Precision Micrometers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016
More informationKvalitet skydelære inklusiv DKD certifikat! 700,00 kr
- + M A H R L I G H T S Tilbud gældende indtil 31. december 2009 Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr MarCal 16 EX med rund eller rektangulær dybdemål til vores tilbudspris 565,00 kr,
More informationMeasuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
More informationFor Sales, Service & Spares contact:
For Sales, Service & Spares contact: Michael Francis House 3 Trimbush Way Market Harborough Leicestershire LE16 7XY Registered in England No. 5562754 VAT No. 780 4974 94 Precision, Quality, Innovation
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationHeight Gauges Pages Data Processing Height Gauges Pages
Height Gauges Height Gauges Pages 232-240 Data Processing Height Gauges Pages 241-244 for sale to the United Kingdom only. All products are intended to be sold to coercial customers. Therefore VAT is not
More informationi-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54
i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm
More informationDoes everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers
More informationTESA RUGOSURF 10 Roughness Gauge
TESA RUGOSURF 10 Roughness Gauge USB ISO 3274 (Cl.1) 10 C to 40 C -10 C to +50 C 122 x 53 x 81 mm (gauge unit alone) 590 g Suited plastic case Robust, versatile and compact gauge unit designed for inspecting
More informationMITUTOYO CANADA INC. PRECISION TOOL SALE
MITUTOYO CANADA INC. PRECISION TOOL SALE Winter 2016 Prices in effect: Jan 4 to Mar 31, 2016 MITUTOYO WORKSHOP DATES & TOPICS FOR 2016 Join us for FREE half day workshops each month. Workshops begin with
More informationBIGGEST TOOL-A-THON EVER!
BIGGEST TOOL-A-THON EVER! 8 NEW Pages! Over 50 NEW Products! Sale ends December 31, 2012 These Gages Read in: Poly-Cal Electronic Caliper Range 6"/150mm Polycarbonate Frame Large easy-to-read display.
More informationCALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
More information500 mm INTERNAL MEASURING INSTRUMENTS
INTERNAL MEASURING INSTRUMENTS SYLVAC offers a large range of internal measuring instruments made of interchangeable or points mechanical heads and electronic units with digital display, integrated in
More informationSAVE UP TO 20% PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY UPDATED EDITION - OVER 40 ADDITIONAL PRODUCTS DISTRIBUTED BY:
SAVE UP TO 20% UPDATED EDITION - OVER 40 ADDITIONAL PRODUCTS PRODUCT PROMOTION DISTRIBUTED BY: FULLY CALIBRATED 2 YEAR WARRANTY Asimeto. Exactly what you need. Everything we do is as exacting as the tools
More information2 ASIMETO 2015 PRODUCT PROMOTION
SAVE UP TO 20% Asimeto. Exactly what you need. Everything we do is as exacting as the tools we make. Asimeto is the creator and manufacturer of high-precision measuring instruments - designed and registered
More informationDIAL GAUGES. K-1
DIAL GAUGES K-1 IP65 Digital Indicator IP65 Protection Level, against liquids. With large digital display. Preset function. ABS/INC. Tolerance setting and indication. Metric/inch conversion. Data output
More informationNEW. Premium Micro Vickers Hardness Tester NOVA 240. See page 7 for details. NEW
Special SPRING / SUMMER 2016 Valid until 30th September 2016 (subject to availability) www.bowersgroup.co.uk Offers Sylvac S_Cal EVO Bluetooth Caliper See page 5 for details. See Bowers Group at MACH 2016,
More informationHOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No.
Small Tool Instruments and Data Management HOLTEST / BOREMATIC Catalog No. E12006 Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy World Class, High Performance,
More informationSurface Roughness Testing
Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the
More informationBEST DEALS. TESA Brown & Sharpe quality measuring instruments at the best prices. HexagonMI.com TESAtechnology.com
BEST DEALS TESA quality measuring instruments at the best prices. Valid until 08.31.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com TESA-HITE 400/700 Robust and reliable. Ideally
More informationU. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
More informationSURFACE MEASUREMENT SURFTEST SJ-201 / SJ-301
Form Measurement Technical Data. SURFACE MEASUREMENT SURFTEST SJ-201 / SJ-301 7.7mm V-type adapter: 12AAE644 (supplied as standard) Point-contact adapter: 12AAE643 (supplied as standard) 72mm Drive Unit
More informationCreative Calibration Centre, Plot No.-3802, Laxman Vihar, Phase-I, Gurgaon, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 21.07.2015 Page 1 of 10 I. DIMENSION 1. HEIGHT GAUGE $ (Digital/Dial/Vernier) L.C: 0.01 mm Φ 0 to 300 mm 0 to 600 mm 8.1 µm 12 µm Using Slip Gauge Blocks & Accessories & Caliper Checker
More informationHeavy duty frame Extra large display
Over 50 NEW items! Bluetooth Ultra-Cal VI Electronic Calipers 54-100-167-0 NOW available with ISO Cert. IP67 rated Available with or without Bluetooth Heavy duty frame Extra large display Order No. Description
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationMAHRLIGHTS. From j 215,-- SPRING PROMOTION. MarCator. Digital indicators with System PROMOTION PRICES VALID UNTIL 31 MAY 2012
+ MAHRLIGHTS MarCator. Digital indicators with System From j 215,-- SPRING PROMOTION PROMOTION PRICES VALID UNTIL 31 MAY 2012 2 Mahrlights. Spring Promotion MarCal. Digital Caliper 16 EWR with Reference
More informationSurface, Form and Contour Measurement SURFACE MEASUREMENT. Bulletin No Portable and benchtop surface measurement solutions from Mitutoyo
Surface, Form and Contour Measurement SURFACE MEASUREMENT Bulletin No. 1752 Portable and benchtop surface measurement solutions from Mitutoyo Our mission is to help you achieve maximum precision for highest
More informationi-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
More informationForm Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
More informationNEW. Visit our NEW Website Over 100. Items! INDICATORS
Over 100 NEW Items! INDICATORS Visit our NEW Website www.fowlerprecision.com Tool-A-Thon 15.2 Highlightes Calipers up to 33% off, page 14 Outside Micrometer Sets 20% off, page 6 Fowler-Sylvac Indicators
More informationDepth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type
epth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range in mm increments. Ratchet stop provides constant force.
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationInside Micrometers. Bore Gages
Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11
More informationVisit us at Booth No September 10 th - 15 th. Enter For A Chance ToWIN! Register at
Visit us at Booth No. 135616 September 10 th - 15 th Enter For A Chance ToWIN! Register at www.fowlerprecision.com/win Fowler-Bowers BLUETOOTH XTH3 Holematic Pistol Grip Sets FREE TABLET! with Complete
More informationBEST DEALS. TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! HexagonMI.com TESAtechnology.
BEST DEALS TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! Valid until 04.30.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com
More informationHeight Gauges. Height Gauges K-1
Height Gauges K-1 Made To Measure in the Course of the Manufacturing Process Height gauges perform one-dimensional measurements on a surface plate, preferably in granite. TESA-µHITE we offer to you in
More informationHEIGHT GAGES YES. Frontal Squareness Deviation "/0.005mm "/.008mm "/0.011mm Air Cushion
Over 80 NEW items! HEIGHT GAGES Fowler-Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult workshop environments.
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from Aug. 17, 2015 to Dec. 31, 2015 Prices Subject to Change Without Notice & Stock Availability. Mitutoyo Savings! Dial Calipers - Series 505 Resolution:.001 Extra-rigid main beam Sliding surfaces
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr MARSHAFT I MANUAL SHAFT MEASURING UNITS V02-May 2009 MarShaft MAN Data Sheets 1 MarShaft MAN Shaft Measuring Unit Advantages at first sight A measuring instrument for multiple measuring
More informationVernier Caliper VERNIER CALIPERS. Basic Model. 4 Way measurement. Under 125mm without step measurement. Upper 300mm/12 without depth measurement.
Vernier Caliper VERNIER CALIPERS Basic Model 4 Way measurement. Under 25mm without step measurement. Upper 300mm/2 without depth measurement. Made of Carbon or Stainless. Metric & Inch 0-/6.02mm/.00 0-200mm/8.02mm/.00
More informationData Sheet: LDS 1367 Date:
Product: Electronic Digital Measuring Set Page 1 of 5 Digital Caliper and Electronic Micrometer Set Set contains: 1 x Electronic Caliper: 150mm/6 1 x Electronic Micrometer: 0-25/0-1 mm Housed in a fitted
More informationMAHRLIGHTS. MarConnect FAST AND FUNCTIONAL SMAHRT INNOVATIONS AT A SPECIAL PRICE A PASSION FOR DETAIL. Maximum mobility thanks to Integrated Wireless
MAHRLIGHTS 2 2018 A PASSION FOR DETAIL Maximum mobility thanks to Integrated Wireless SPECIAL OFFERS VALID FROM 15 SEPTEMBER TO 31 OCTOBER 2018 FAST AND FUNCTIONAL SMAHRT INNOVATIONS AT A SPECIAL PRICE
More informationDIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
More informationPortable Hardness Tester DHT-100
Portable Hardness Tester DHT-100 Large LCD display with back light Impact devices D DC DL C D+15 G and E are available for special applications RS 232 output Automatic conversions to: Brinell HB, Rockwell
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
SERIES 207: MICROMETER DEPTH GAGES STARRETT SERIES 440, 445: Length No. of Order Range of Base Rods No. 0-4 2-1/2 4 5001502 0-4 4 4 5001503 0-6 4 6 5001504 The depths of holes, slots, shoulders, and projections
More informationBulletin No Portable Surface Roughness Tester. Surftest SJ-201P. Smart tool in the workshop
Bulletin No 1670-178 Portable Surface Roughness Tester Surftest SJ-201P Smart tool in the workshop Portable Surface Roughness Tester SURFTEST SJ-201P Large characters are displayed on the large easy-to-view
More informationMAHRLIGHTS. Software MarWin Millimar Cockpit and Millimar N 1700 modules MEASURING SOLUTIONS AT DISCOUNTED PRICES A PASSION FOR DETAIL
MAHRLIGHTS 1 2018 A PASSION FOR DETAIL Evaluating measuring data is now even more efficient and user-friendly Software MarWin Millimar Cockpit and Millimar N 1700 modules MEASURING SOLUTIONS AT DISCOUNTED
More informationMarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
More informationPRESSES. Rack and pinion presses. Toggle presses. Impact presses. Pneumatic presses. Rotary indexing table
PRESSES Rack and pinion presses Toggle presses Impact presses Pneumatic presses Rotary indexing table PRESSES Rack and pinion presses HP 40 HP 150 HP 150 T Type HP 40 HP 150 HP 150 T HP 225 T HP 200 Z
More informationTR Profile + DH-8 127
TR Profile + DH-8 127 TRIMOS SURFACE ANALYSIS INSTRUMENTS TR Profile + DH-8 introduction The TR Profile and TR Profile DH-8 are extremely precise surface roughness measuring instruments, built for the
More information0-1 /0-25mm Optional Accessories MSLP SALE 05CZA662 SPC cable (40 / 1m) $ $ CZA663 SPC cable (80 / 2m) $ $133.
Winter 2012 Prices effective from Jan. 3 to Apr. 30, 2012 New Year Sale Featuring Mitutoyo Precision Measuring Tools & Instruments Cable #02AZD790B Coolant Proof Micrometers - Ratchet Stop Range Order
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from July 1, 2016 to September 30, 2016 *Manufacturer s Part Number Shown Special Mitutoyo Summer Savings HUGE SAVINGS! LIMITED TIME ONLY! Prices Subject to Change Without Notice & Stock Availability.
More informationMicro-Flat Datums Pvt. Ltd., Plot No , Zone D-3, GIDC, Vitthal Udyognagar, Anand, Gujarat
Last Amended on 03.12.2015 Page 1 of 9 I. DIMENSION 1. CALIPERS $ L.C.: 0.01 mm Φ L.C.: 0.02 mm Φ 0 to 600 mm 0 to 1000 mm 0 to 2000 mm 9.37 µm 9.25 µm 14.64 µm Using Slip Gauge Set, Caliper Checker, Master
More information50 NEW. Over. items! Valid January 1 st - April 30 th
Over 50 NEW items! Valid January 1 st - April 30 th Fowler - Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult
More informationMicromar. a new generation with the reference-system
- 2 Micromar. micrometers Micromar. a new generation with the reference-system WATERPROOF MICROMETERS with this new generation of reference micrometers, mahr once again sets a new standard in the micrometer
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 8 I. DIMENSION 1. PLAIN PLUG / WIDTH/ DEPTH / Upto 100 mm 2.0 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ Above 100 to 300 mm 3.0 µm Comparator with Stand
More informationDigimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
More informationPrecision Tools & Instruments Prices effective from Jan. 1 - Apr. 30, 2010 or while quantities last. Some items may not be exactly as shown.
WINTER FLYER 2010 Precision Tools & Instruments Prices effective from Jan. 1 - Apr. 30, 2010 or while quantities last. Some items may not be exactly as shown. QuantuMike Micrometer SERIES 293 For significant
More informationBATHS SHAKERS STIRRERS HOTPLATES MECHANICAL MEASUREMENT HEATING MANTLES MECHANICAL MEASUREMENT
BATHS SHAKERS STIRRERS HOTPLATES MECHANICAL MEASUREMENT HEATING MANTLES MECHANICAL MEASUREMENT Universal Digital Calipers CALIPERS MT-1101060 MT-1101060, Universal Digital Calipers Universal Digital Calipers
More informationSome of our LOWEST. prices of the year!
Some of our LOWEST prices of the year! Scan F60 & F60T Optical Measuring Center The all NEW Fowler-Sylvac Scan, developed to measure even the most demanding of cylindrical parts. All new camera and optics,
More information