DSubminiature Space Connectors General

Transcription

1 Subminiature Space onnectors General High performance Subminiature connectors, S or MIL qualified, for space applications. Space/High reliability *M and *M connectors meet stringent tests for outgassing and residual magnetism and are suitable for use in space, medical, and high performance military/aerospace applications. *M and *M connectors meet the performance and dimensional requirements of the S/S 3401 and MIL-TL specifications. *M and *M connectors are available in standard and high density layouts. Product eatures Non-magnetic Non-outgassing Materials and inishes Standard density layout : 9, 15, 25, 37, 50 contacts High density layout : 15, 26, 44, 62, 78, 104 contacts 6 shell sizes :,,,,, Machined contacts Shells Insulators, and saver spacers emale signal contacts Male signal contacts oaxial and power contacts elivered separately ( section coax and power contacts) Screwlocks ackshells Other metal parts ust caps or 104 contacts connectors refers to *M/*M High density 104 contacts section opper alloy inish : 0,70 m (28 in) min Gold over opper (S/S and R022 quality levels) inish : 1,27 m (50 in) min Gold over opper (R023 quality level) High performance thermoplastic type PT, UL 94-V0, glass filled, natural color Housings : opper alloy inish : 1,27 m (50 in) min Gold over opper lips : erylium opper alloy inish : 1,27 m (50 in) min Gold over Nickel opper alloy inish : 1,27 m (50 in) min Gold over opper opper alloy inish : 1,27 m (50 in) min Gold over opper Insulator (coaxial contacts) : PT (Teflon) opper alloy inish : 0,70 m (28 in) min Gold over opper (S/S and R022 quality levels) inish : 1,27 m (50 in) min Gold over opper (R023 quality level) Stainless Steel inish : Passivated opper alloy inish : 0,70 m (28 in) min Gold over opper (S/S and R022 quality levels) inish : 1,27 m (50 in) min Gold over opper (R023 quality level) opper alloy inish : 0,70 m (28 in) min Gold over opper (S/S and R022 quality levels) inish : 1,27 m (50 in) min Gold over opper (R023 quality level) Standard : High density Polyethylene, red color. elivered with the connector for S version only. ntistatic (on request) : High density Polyethylene, black color 6

2 Subminiature Space onnectors General *M/*M/*M Quality Levels S/S Quality Level. The ole plant (rance) is qualified by S for the supply of *Subminiature connectors and accessories, according to the Generic Specification S/S 3401, and the applicable etail Specifications : - S/S 3401/001 (*M connectors) - S/S 3401/002 (*M connectors) - S/S 3401/004 (*M oaxial contacts) - S/S 3401/005 (*M rimp contacts) - S/S 3401/020 (*M connectors saver) - S/S 3401/021 (*M contacts saver) - S/S 3401/022 (ccessories) - S/S 3401/040 (*M Power contacts) irst qualification obtained in 1981, and renewed every 2 years. Qualification certificates : 71 (*M), and 72 (*M). pplications : light equipments, satellites, launchers (S/S requirements). R023 Quality Level. "MIL lass M" and similar. onnector Specification R023, based on the MIL-TL Specification for lass M, and covering : - the MIL qualified variants (QPL) for space applications (marked M24308/x-xx). - by similarity, other variants manufactured and controlled according to the MIL-TL Specification, for space applications. The suffix R023 is used in the description, when no M24308 reference is available. The ole plant (rance) is MIL qualified for the supply of *Sub connectors, according to the MIL-TL Specification. pplications : light equipments, satellites, launchers (MIL requirements). R022 Quality Level. "ommercial Space Grade". onnector Specification R022, amendment to the S/S Generic Specification 3401, for low cost products manufactured : - in the same S qualified site - through the same manufacturing and control processes - with the same piece parts - with lighter controls, documentation and traceability This ommercial Space Grade is replacing the previous K47 and K52 series. pplications : ngineering models, ground equipments, testing, some flight equipments (no need for high requirements). The connectors and accessories, supplied according to these 3 quality levels, are totally compatible, interchangeable, and intermateable, as they are manufactured with the same piece parts in the same S and MIL qualified site. 7

3 Subminiature Space onnectors General *M/*M/*M Performance Specifications Operating Temperature range Storage Temperature range Working Voltage (between contacts and contact and shell) Insulation Resistance (500 V ) -55 / +125 (-67 / +257 ) -65 / +125 (-85 / +257 ) ontact Type Sea level m (108,240 feet) altitude *M size Vrms 250 Vrms *M size Vrms 200 Vrms *M oax 100 Vrms 100 Vrms (center contact to coax shell) *M oax 100 Vrms 100 Vrms (coax shell to connector) *M Power 250 Vrms 250 Vrms *M size Vrms 250 Vrms *M size Vrms 250 Vrms M min Voltage Proof 1250 Vrms / 2.0 m max leakage current (Standard ensity) 1000 Vrms / 2.0 m max leakage current (High ensity) ontact Retention in insert 40 N max. / contact axial displacement 0,30 mm (.011 in) max Mating orce (N max) Shell Size Standard ensity High ensity Unmating orce (N min / N max) Shell Size Standard ensity High ensity 3.5 / / / / / / / / / / / 177 ngagement/separation orces ngagement orce (ontacts size 20) : 3.33 N max, pin dia 1,04 (.041) ngagement orce (ontacts size 22) : 3.33 N max, pin dia 0,775 (.031) Separation orce (ontacts size 20) : 0.28 N min, pin dia 0,99 (.039) / 2.22 N max, pin dia 1,04 (.041) Separation orce (ontacts size 22) : 0.20 N min, pin dia 0,749 (.029) / 2.22 N max, pin dia 0,775 (.031) ontact Resistance Low level current (10 m / 20 mv ) : 6.0 m max Rated current : 5.0 m max Maximum Rated urrent ontact Type Rated urrent () Size 20 solder 7.5 Size 20 wrap 3.0 Size 22 solder 5.0 oax center contact 7.5 Power 40.0 Size 20/20 crimp 7.5 Size 20/26 crimp 3.0 Size 20/18 crimp 7.5 Size 22/22 crimp 5.0 Residual Magnetism Level (S/S) Magnetic Permeability (MIL lass M) Residual Magnetism Suffix code 200 Gamma NM 20 Gamma NM (On special request. onsult factory) Relative Permeability : 2 m max (measurement with instrument conforming to STM 342) 8

4 Subminiature Space onnectors General *M/*M/*M Shell imensions - Plug Mating side Shell Size mm ± 0,38 ± 0,13 ± 0,13 ± 0,13 ± 0,38 ± 0,25 G ± 0,25 H ± 0,25 W ± * / ** J ± * / ** K ± * / ** 30,81 16,92 24,99 8,36 12,55 10,72 19,28 10,72 6,69 * 5,94 * 1,21 * 0,77 39,14 25,25 33,32 8,36 12,55 10,72 27,51 10,72 6,69 * 5,94 * 1,21 * 0,77 53,04 38,96 47,04 8,36 12,55 10,82 41,28 10,72 6,84 ** 5,84 ** 1,52 ** 0,99 69,32 55,42 63,50 8,36 12,55 10,82 57,71 10,72 6,84 ** 5,84 ** 1,52 ** 0,99 66,93 52,81 61,11 11,07 15,37 10,82 55,33 13,57 6,84 ** 5,84 ** 1,52 ** 0,99 * Shell Size (inch) ±.015 ±.005 ±.005 ±.005 ±.015 ±.010 G ±.010 H ±.010 * ± 0,37 ** ± 0,41 W ± * / ** * ± 0,12 ** ± 0,15 J ± * / ** * ± 0,32 ** ± 0,25 K ± * / ** * * * * ** ** ** ** ** **.039 * * ±.015 ** ±.016 * : Shell dimensions for 104 contacts connectors refers to *M/*M High density 104 contacts section. * ±.005 ** ±.006 * ±.013 ** ±.010 L ± 0,25 L ±.010 9

5 Subminiature Space onnectors General *M/*M Shell imensions - Receptacle Mating side Shell Size mm ± 0,38 ± 0,13 ± 0,13 ± 0,13 ± 0,38 ± 0,25 30,81 16,33 24,99 7,90 12,55 10,90 19,28 10,72 6,94 6,18 1,21 0,77 39,14 24,66 33,32 7,90 12,55 10,90 27,51 10,72 6,94 6,18 1,21 0,77 53,04 38,38 47,04 7,90 12,55 10,90 41,28 10,72 6,94 6,18 1,21 0,77 69,32 54,84 63,50 7,90 12,55 10,90 57,71 10,72 6,94 6,18 1,21 0,77 66,93 52,42 61,11 10,74 15,37 10,90 55,33 13,57 6,94 6,18 1,21 0,77 * G ± 0,25 H ± 0,25 W ± 0,38 J ± 0,13 K ± 0,32 L ± 0,25 Shell Size (inch) ±.015 ±.005 ±.005 ±.005 ±.015 ± * G ±.010 H ±.010 W ±.015 J ±.005 K ±.013 L ±.010 * : Shell dimensiosn for 104 contacts connectors, refers page to *M/*M High density 104 contacts section. 10

6 Subminiature Space onnectors General *M/*M/*M Standard ensity ontact avity rrangements ace view plug inserts (use a mirror image for receptacle inserts) Shell Size ontact rrangement ontact Size 9 # # # 20 Shell Size ontact rrangement ontact Size 37 # # 20 High ensity ontact avity rrangements ace view pin inserts (use a mirror image for receptacle inserts) Shell Size ontact rrangement ontact Size 15 # # # 22 Shell Size ontact rrangement ontact Size 62 # # 22 Shell Size ontact rrangement ontact Size 104 # 22 11

7 Subminiature Space onnectors General *M Standard ensity ontact avity ombination rrangements for *M connectors : ace view pin inserts (use a mirror image for receptacle inserts) Shell Size ontact rrangement Nb. of Size 20 avities Nb. of Size 8 avities 5W W WK W2 5 2 Shell Size ontact rrangement Nb. of Size 20 avities Nb. of Size 8 avities 11W W W4 5 4 Shell Size ontact rrangement Nb. of Size 20 avities Nb. of Size 8 avities 13W W W Shell Size ontact rrangement Nb. of Size 20 avities Nb. of Size 8 avities 8W W W Shell Size ontact rrangement Nb. of Size 20 avities Nb. of Size 8 avities 21W W W Shell Size ontact rrangement Nb. of Size 20 avities Nb. of Size 8 avities 24W W Shell Size ontact rrangement Nb. of Size 20 avities Nb. of Size 8 avities 43W W

8 Subminiature Space onnectors General *M / *M Panel utouts Standard utout Rear Mounting utout (Optional) Standard Shell Shell Size mm (inch) Mounting Method G ± 0,05 (.002) H ± 0,05 (.002) J ± 0,05 (.002) ront 22,19 (.874) 11,09 (.437) 24,99 (.984) 12,49 (.492) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) Rear 20,47 (.806) 10,23 (.403) 24,99 (.984) 12,49 (.492) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) ront 30,53 (1.202) 15,26 (.601) 33,32 (1.312) 16,66 (.656) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) Rear 28,80 (1.134) 14,40 (.567) 33,32 (1.312) 16,66 (.656) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) ront 44,27 (1.743) 22,14 (.872) 47,04 (1.852) 23,52 (.926) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) Rear 42,51 (1.674) 21,25 (.837) 47,04 (1.852) 23,52 (.926) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) ront 60,73 (2.391) 30,37 (1.196) 63,50 (2.500) 31,75 (1.250) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083) Rear 59,08 (2.326) 29,54 (1.163) 63,50 (2.500) 31,75 (1.250) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132) ront 58,34 (2.297) 29,18 (1.149) 61,11 (2.406) 30,55 (1.203) 15,82 (.623) 7,92 (.312) 3,04 (.120) 1,52 (.060) 2,10 (.083) Rear 56,33 (2.218) 28,16 (1.109) 61,11 (2.406) 30,55 (1.203) 14,09 (.555) 7,06 (.278) 3,04 (.120) 1,52 (.060) 3,35 (.132) ront 59,60 (2.346) 29,80 (1.173) 63,50 (2.500) 31,75 (1.250) 19,10 (.752) 9,55 (.376) 3,04 (.120) 1,52 (.060) 2,10 (.083) Rear 58,10 (2.287) 29,05 (1.144) 63,50 (2.500) 31,75 (1.250) 14,56 (.573) 7,28 (.287) 3,04 (.120) 1,52 (.060) 3,35 (.132) ual loat Mount Shell Shell Size mm (inch) Mounting Method G ± 0,05 (.002) H ± 0,05 (.002) J ± 0,05 (.002) ront 23,01 (.906) 11,50 (.453) 24,99 (.984) 12,49 (.492) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) Rear 21,28 (.838) 10,64 (.419) 24,99 (.984) 12,49 (.492) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) ront 31,34 (1.234) 15,67 (.617) 33,32 (1.312) 16,66 (.656) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) Rear 29,61 (1.166) 14,80 (.583) 33,32 (1.312) 16,66 (.656) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) ront 45,08 (1.775) 22,55 (.888) 47,04 (1.852) 23,52 (.926) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) Rear 43,33 (1.706) 21,66 (.853) 47,04 (1.852) 23,52 (.926) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) ront 61,54 (2.423) 30,78 (1.212) 63,50 (2.500) 31,75 (1.250) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083) Rear 59,79 (2.354) 29,89 (1.177) 63,50 (2.500) 31,75 (1.250) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132) ront 59,15 (2.329) 29,59 (1.165) 61,11 (2.406) 30,55 (1.203) 16,63 (.655) 8,33 (.328) 2,23 (.088) 1,11 (.044) 2,10 (.083) Rear 57,15 (2.250) 28,57 (1.125) 61,11 (2.406) 30,55 (1.203) 14,90 (.587) 7,46 (.294) 2,23 (.088) 1,11 (.044) 3,35 (.132) ront 60,40 (2.378) 30,20 (1.189) 63,50 (2.500) 31,75 (1.250) 19,90 (.783) 9,95 (.392) 2,23 (.088) 1,11 (.044) 2,10 (.083) Rear 58,90 (2.319) 29,45 (1.159) 63,50 (2.500) 31,75 (1.250) 15,16 (.597) 7,58 (.298) 2,23 (.088) 1,11 (.044) 3,35 (.132) 13

9 Subminiature Space onnectors General *M / *M Mounting onditions Shell Size min max 6,35 (.250) 7,11 (.280) 6,35 (.250) 7,11 (.280) 6,12 (.241) 6,88 (.271) 6,12 (.241) 6,88 (.271) 6,12 (.241) 6,88 (.271) 6,12 (.241) 6,88 (.271) ront Panel Mounting Rear Panel Mounting Standard Shell ual loat Mount Shell Standard Shell ual loat Mount Shell ixing Options Through Hole (yelet) aptive Nut () ual loat Mount (Y) imension K - Plug imension K Receptacle Shell Size ± 0,33 (.013) ± 0,25 (.010) Shell Size ± 0,318 (.013) 1,21 (.048) 1,21 (.048) 1,21 (.048) 1,21 (.048) 1,52 (.060) 1,21 (.048) 1,52 (.060) 1,21 (.048) 1,52 (.060) 1,21 (.048) 0.9± 0,1 (.035± 0,004) 14

10 Subminiature Space onnectors *M Product eatures onnectors with crimp, snap-in, removable contacts. onnectors normally supplied without contacts (suffix 0 in the description, not marked on the connector) When supplied with contacts (no suffix 0), the connectors are equiped with contacts : Size 20/20 for standard density Size 22/22 for high density Packaging unit : 1 piece (plastic bag) ust cap and insertion/extraction tool supplied with each connector, only for quality level S/S Specific imensions onnectors equipped with contacts size 20/20 20/26 22/22 onnectors equipped with contacts size 20/18 *M connectors with contacts Male connector emale connector Shell Size V max W1 min (ull pin diameter) W1 max (ull pin diameter) W2 min (Square ended pin) S.. (# 20) H.. (# 22) S.. (# 20) H.. (# 22) S.. (# 20) H.. (# 22) 0,40 (.016) 4,36 (.172) 4,43 (.174) 5,48 (.216) 5,45 (.215) 3,77 (.148) 3,63 (.143) 0,40 (.016) 4,36 (.172) 4,43 (.174) 5,48 (.216) 5,45 (.215) 3,77 (.148) 3,63 (.143) 0,60 (.024) 4,26 (.168) 4,33 (.170) 5,38 (.212) 5,45 (.215) 3,77 (.148) 3,63 (.143) 0,60 (.024) 4,26 (.168) 4,33 (.170) 5,38 (.212) 5,45 (.215) 3,77 (.148) 3,63 (.143) 0,60 (.024) 4,26 (.168) 4,33 (.170) 5,38 (.212) 5,45 (.215) 3,77 (.148) 3,63 (.143) Z1 : 0,99 (.039) / 1,04 (.041) S.. (# 20), or 0,75 (.0295) / 0,77 (.0305) H.. (# 22) Z2 : to accomodate a 1,02 (.040) diameter pin S.. (# 20), or a 0,76 (.030) diameter pin H.. (# 22) Weights Max Weight (grams) without contacts Shell Size Standard ensity High ensity

11 Subminiature Space onnectors *M ontacts generalities Male (Pin) rimp ontacts ontact Type Max Weight (grams) Pin 20/ Pin 20/ Pin 20/ Pin 22/ ucket Type Size Wire Size S/S Quality Level R023 Quality Level R022 Quality Level WG escription Part Number escription Standard 20/20 20 / 22 / H R023 Reduced 20/26 26 / 28 / 30* H R023 Large 20/18 18 / 20 / 2x22* H R023 Standard 22/22 22 / 24 / 26 / 28* emale (Socket) rimp ontacts H R023 Part Number escription R R R R022 Part Number ontact Type Max Weight (grams) Skt 20/ Skt 20/ Skt 20/ Skt 22/ ucket Type Size Wire Size S/S Quality Level R023 Quality Level R022 Quality Level WG escription Part Number escription Standard 20/20 20 / 22 / H R023 Reduced 20/26 26 / 28 / 30* H R023 Large 20/18 18 / 20 / 2x22* H R023 Standard 22/22 22 / 24 / 26 / 28* H R023 Note * : Not approved by S ontacts are without marking and without ink color coding (non-outgassing) Residual magnetism level NM (200 Gamma max) or other residual magnetism level, consult factory Packaging unit : 250 pieces (plastic bag) Part Number escription R R R R022 Part Number

12 Subminiature Space onnectors *M ontacts dimensions Male ontact Size 20/20 mm G H J K L M N O P Q R Min - 9,80 0,74 2,08 1,65 1,09 3,40 3,81 1,01 0,64 1,78 0,99 1,65-1,73 2,40 Max 14,14 10,00 0,84 2,16 1,73 1,17 3,68 4,70 1,24 0,80 1,85 1,04 1,75 0,30 1,80 - (Inch) G H J K L M N O P Q R Min Max emale ontact Size 20/20 mm G H J K L M N P Q R Min - 9,45 0,74 2,08 1,65 1,09 3,40 3,81 1,01 0,64 1,75 1,07 7,37 1,73 2,40 Max 13,80 9,65 0,84 2,16 1,73 1,17 3,68 4,70 1,24 0,80 1,85 1,14 7,87 1,80 - (Inch) G H J K L M N P Q R Min Max

13 Subminiature Space onnectors *M ontacts dimensions Male ontact Size 20/26 mm G H J K L M N O P Q R Min - 9,80 0,74 2,08 1,65 0,59 3,40 3,81 1,01 0,45 1,78 0,99 1,65-1,73 2,40 Max 14,14 10,00 0,84 2,16 1,73 0,66 3,68 4,70 1,24 0,55 1,85 1,04 1,75 0,30 1,80 - (Inch) G H J K L M N O P Q R Min Max emale ontact Size 20/26 mm G H J K L M N P Q R Min - 9,45 0,74 2,08 1,65 0,59 3,40 3,81 1,01 0,45 1,75 1,07 7,37 1,73 2,40 Max 13,80 9,65 0,84 2,16 1,73 0,66 3,68 4,70 1,24 0,55 1,85 1,14 7,87 1,80 - (Inch) G H J K L M N P Q R Min Max

14 Subminiature Space onnectors *M ontacts dimensions Male ontact Size 20/18 mm G H J K L M N O P Q Min - 9,80 0,74 2,08 2,09 1,65 3,81 4,32 6,15 0,60 1,78 0,99 1,65-1,73 Max 21,13 10,00 0,84 2,16 2,18 1,74 4,00 4,70 6,45 0,80 1,85 1,04 1,75 0,30 1,80 (Inch) G H J K L M N O P Q Min Max emale ontact Size 20/18 mm G H J K L M N P Q Min - 9,45 0,74 2,08 2,09 1,65 3,81 4,32 6,15 0,60 1,75 1,07 7,37 1,73 Max 20,80 9,65 0,84 2,16 2,18 1,74 4,00 4,70 6,45 0,80 1,85 1,14 7,87 1,80 (Inch) G H J K L M N P Q Min Max

15 Subminiature Space onnectors *M ontacts dimensions Male ontact Size 22/22 mm G H J L N P Min - 7,49 0,74 1,52 1,17 0,85 3,09 3,58 0,46 0,75 - Max 13,64 7,62 0,84 1,57 1,22 0,90 3,27 3,99 0,56 0,77 0,20 (Inch) G H J L N P Min Max emale ontact Size 22/22 mm G H J L M N P Min - 7,08 1,17 0,85 3,09 3,58 0,46 1,52 0,78 5,55 Max 13,41 7,34 1,22 0,90 3,27 3,99 0,56 1,57-5,85 (Inch) G H J L M N P Min Max

16 Subminiature Space onnectors *M ontacts assembly pplication Tools Insertion/xtraction Tool Supplied with each connector, for quality level S/S To be ordered separately for quality levels R023 and R022 Hand rimp Tool +locator should be ordered separately ontact Plastic Insertion/xtraction Tool escription Part Number Plastic xtraction Tool escription Part Number 20/20 IT-20-H T /26 IT-20-H T / T /22 - IT ontact Wire Size rimp Tool description 20/20 WG 20 WG 22 WG 24 20/26 WG 26 WG 28 WG 30 20/18 WG 18 WG 20 22/22 WG 22 WG 24 WG 26 WG 28 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 M22520/2-01 rimp tool Part Number Locator description M22520/2-08 M22520/2-08 M22520/2-08 M22520/2-08 ** M22520/2-08 ** M22520/2-08 ** K250 K250 M22520/2-09 (Pin) or /2-06 (Skt) *** M22520/2-09 (Pin) or /2-06 (Skt) *** M22520/2-09 (Pin) or /2-06 (Skt) *** M22520/2-09 (Pin) or /2-06 (Skt) *** Locator Part Number or or or or -739 * or information only. Wire tensile strength test shall govern. or S/S, see SS-Q (replaces S PSS ). ** Locator L H (Part number ) can also be used for contacts 20/26. *** Locator M22520/2-06 (Part number ) can also be used for both Pin and Skt contacts. ssembly Instructions Wire Stripping ontact rimping ontact Insertion (1) Selector Position * ut wires to length. Strip Insulation per above illustration. check for broken or frayed wires. Insert contact and wire into proper crimp tool and locator. rimp contact to wire. Inspect crimp. enter wired contact in groove of insertion tool with tool tip butting contact. Insert contact into cavity until a positive stop is felt. Inspect insertion. ontact Insertion (2) ontact xtraction (1) ontact xtraction (2) To be sure contact is locked securely, pull back lightly on wire. Repeat for balance of contacts working row by row across the insulator Place wire into extraction tool tip. 21 Insert tool tip into contact cavity until tip bottoms against contact shoulder, releasing tines. Hold wire against tool with finger and remove tool and contact. Repeat for balance of contacts.

17 Subminiature Space onnectors *M How to order S/S Quality Level M Y 25 P NM XXX O ontact information 0: without contacts (marked on the documentation / not marked on the connector) Nothing : with contacts (size 20/20 for Standard ensity / size 22/22 for High ensity) Shell inish for size only : 174 ( 25.4 m Ni), R172 : 0.7 m gold over 25.4 m Ni Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) Number of contacts for variant 01 : : 9 : 15 : 25 :: Number of contacts for variant 02 : : 15 : 26 : 44 : 62 : 78 : 104 ixing option Nothing : Standard through hole : aptive nut ( not applicable for size ) Y: ual float mount Insert type : M for two-piece insert with metal retention clips for crimp contacts Shell size Series Testing level Variant 01: Standard density 02: High density etail specification number 22

18 Subminiature Space onnectors *M How to order R023 Quality Level M M Y 25 P NM -XXX-O R023 O ontact information 0: without contacts (marked on the documentation / not marked on the connector) Nothing : with contacts (size 20/20 for Standard ensity / size 22/22 for High ensity) Suffix for MIL lass Level (onnector Specification R023) Shell inish for size only : 174 ( 25.4 m Ni), R172 : 0.7 m gold over 25.4 m Ni Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) Number of contacts for variant 01 : : 9 : 15 : 25 :: Number of contacts for High ensity versions (contacts size 22): : 15 : 26 : 44 : 62 : 78 : 104 ixing option Nothing : Standard through hole : aptive nut ( not applicable for size ) Y: ual float mount ccording to MIL-TL Specification Insert type : M for two-piece insert with metal retention clips for crimp contacts Shell size Series 23

19 Subminiature Space onnectors *M How to order R022 Quality Level M Y 25 P NM -XXX-O R022 O ontact information 0: without contacts (marked on the documentation / not marked on the connector) Nothing : with contacts (size 20/20 for Standard ensity / size 22/22 for High ensity) Suffix for ommercial Space Grade Quality Level (onnector Specification R022) Shell inish for size only : 174 ( 25.4 m Ni), R172 : 0.7 m gold over 25.4 m Ni Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) Number of contacts for variant 01 : : 9 : 15 : 25 :: Number of contacts for High ensity versions (contacts size 22): : 15 : 26 : 44 : 62 : 78 : 104 ixing option Nothing : Standard through hole : aptive nut ( not applicable for size ) Y: ual float mount Insert type : M for two-piece insert with metal retention clips for crimp contacts Shell size Series 24

20 Subminiature Space onnectors *M ross References Type escription S/S escription R023 escription R022 Without contacts M*9PNM0 MM*9PNM-R023-0 M*9PNM-R M*9SNM0 MM*9SNM-R023-0 M*9SNM-R M*15PNM0 MM*15PNM-R023-0 M*15PNM-R M*15SNM0 MM*15SNM-R023-0 M*15SNM-R M*25PNM0 MM*25PNM-R023-0 M*25PNM-R M*25SNM0 MM*25SNM-R023-0 M*25SNM-R M*37PNM0 MM*37PNM-R023-0 M*37PNM-R M*37SNM0 MM*37SNM-R023-0 M*37SNM-R M*50PNM0 MM*50PNM-R023-0 M*50PNM-R M*50SNM0 MM*50SNM-R023-0 M*50SNM-R M*15PNM0 MM*15PNM-R023-0 M*15PNM-R M*15SNM0 MM*15SNM-R023-0 M*15SNM-R M*26PNM0 MM*26PNM-R023-0 M*26PNM-R M*26SNM0 MM*26SNM-R023-0 M*26SNM-R M*44PNM0 MM*44PNM-R023-0 M*44PNM-R M*44SNM0 MM*44SNM-R023-0 M*44SNM-R M*62PNM0 MM*62PNM-R023-0 M*62PNM-R M*62SNM0 MM*62SNM-R023-0 M*62SNM-R M*78PNM0 MM*78PNM-R023-0 M*78PNM-R M*78SNM0 MM*78SNM-R023-0 M*78SNM-R M*104PNM MM*104PNM-174-R023-0 M*104PNM-174-R M*104SNM MM*104SNM-174-R023-0 M*104SNM-174-R M*104PNM-R172-0 MM*104PNM-R172-R023-0 M*104SPM-R172-R M*104SNM-R172-0 MM*104SNM-R172-R023-0 M*104SSM-R172-R022-0 With contacts M*9PNM MM*9PNM-R023 M*9PNM-R M*9SNM MM*9SNM-R023 M*9SNM-R M*15PNM MM*15PNM-R023 M*15PNM-R M*15SNM MM*15SNM-R023 M*15SNM-R M*25PNM MM*25PNM-R023 M*25PNM-R M*25SNM MM*25SNM-R023 M*25SNM-R M*37PNM MM*37PNM-R023 M*37PNM-R M*37SNM MM*37SNM-R023 M*37SNM-R M*50PNM MM*50PNM-R023 M*50PNM-R M*50SNM MM*50SNM-R023 M*50SNM-R M*15PNM MM*15PNM-R023 M*15PNM-R M*15SNM MM*15SNM-R023 M*15SNM-R M*26PNM MM*26PNM-R023 M*26PNM-R M*26SNM MM*26SNM-R023 M*26SNM-R M*44PNM MM*44PNM-R023 M*44PNM-R M*44SNM MM*44SNM-R023 M*44SNM-R M*62PNM MM*62PNM-R023 M*62PNM-R M*62SNM MM*62SNM-R023 M*62SNM-R M*78PNM MM*78PNM-R023 M*78PNM-R M*78SNM MM*78SNM-R023 M*78SNM-R M*104PNM-174 MM*104PNM-174-R023 M*104PNM-174-R M*104SNM-174 MM*104SNM-174-R023 M*104SNM-174-R M*104PNM-R172 MM*104PNM-R172-R023 M*104SPM-R172-R M*104SNM-R172 MM*104SNM-R172-R023 M*104SSM-R172-R022 * : remove when the standard through hole option is required replace by the letter "" when the captive nut option is required ( not available for 104 contacts type) replace by the letter "Y" when the dual float mount option is required 25

21 Subminiature Space onnectors *M Standard ensity Product eatures onnectors with solder type or wire-wrap type termination contacts size 20 inserted into one-piece insulators. Termination types available : - Solder ucket terminations - Straight P solder terminations - 90 bent P solder terminations - Wire-wrap terminations ombination arrangements available for size 8 snap-in coaxial, power, or high voltage contacts onnectors supplied without coaxial power or high voltage contacts. ontacts have to be ordered separately. Packaging unit : 1 piece (plastic bag) ust cap supplied with each connector, only for quality level S/S Specific imensions Termination Types Solder ucket Straight P Solder 90 ent P Solder / Without racket 90 ent P Solder / With rackets / uropean ootprint 90 ent P Solder / With rackets / U.S. ootprint Wire-Wrap Male connector emale connector Shell Size V max W1 min (ull pin diameter) Z2 : to accomodate a 0,99 (.039) / 1,04 (.041) diameter pin W1 max (ull pin length) Z1 min Z1 max W2 min (Square ended pin) 0,40 (.016) 4,47 (.176) 5,33 (.210) 0,99 (.039) 1,04 (.041) 4,36 (.172) 0,40 (.016) 4,47 (.176) 5,33 (.210) 0,99 (.039) 1,04 (.041) 4,36 (.172) 0,60 (.024) 4,47 (.176) 5,33 (.210) 0,99 (.039) 1,04 (.041) 4,36 (.172) 0,60 (.024) 4,47 (.176) 5,33 (.210) 0,99 (.039) 1,04 (.041) 4,36 (.172) 0,60 (.024) 4,47 (.176) 5,33 (.210) 0,99 (.039) 1,04 (.041) 4,36 (.172) Weights Max Weight (grams) without contacts or accessories Shell Size Weight (Grams) or the total connector weight, add the weight of the contacts and of the eventual accessories

22 Subminiature Space onnectors *M Standard ensity Solder ucket Terminations type OL3 M and Z : Specific imensions Sizes,,, Size Termination ontacts Shell Size ± 0,60 (.024) Typical + 0,05 (.002) / 0 G ± 0,55 (.022) H min Pitch between contacts Male 9,60 (.378) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,74 (.108) 9,60 (.378) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,74 (.108) 9,80 (.386) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,76 (.109) 9,80 (.386) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,76 (.109) 9,80 (.386) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,76 (.109) emale 9,60 (.378) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,74 (.108) Termination Modifier : Nothing 9,60 (.378) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,74 (.108) 9,60 (.378) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,76 (.109) 9,60 (.378) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,76 (.109) 9,60 (.378) 2,84 (.112) 1,10 (.043) 1,95 (.077) 2,40 (.094) 2,76 (.109) Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact Max Weight (grams) of all contacts per size

23 Subminiature Space onnectors *M Standard ensity Straight P solder Terminations type OL3, M, Z Specific imensions Sizes,,, Size Termination Modifier ± 0,05 (.002) G ± 0,20 (.008) OL3 0,60 (.024) 4,15 (.163) M 0,76 (.030) 3,65 (.144) Z 0,76 (.030) 4,65 (.183) ontacts Shell Size min max Typical Pitch between contacts Male 10,00 (.394) 11,20 (.441) 2,84 (.112) 2,74 (.108) 10,00 (.394) 11,20 (.441) 2,84 (.112) 2,74 (.108) 10,20 (.402) 11,40 (.449) 2,84 (.112) 2,76 (.109) 10,20 (.402) 11,40 (.449) 2,84 (.112) 2,76 (.109) 10,20 (.402) 11,40 (.449) 2,84 (.112) 2,76 (.109) emale 10,00 (.394) 11,20 (.441) 2,84 (.112) 2,74 (.108) Termination Modifier : OL3, M, Z or other termination modifier, consult factory 10,00 (.394) 11,20 (.441) 2,84 (.112) 2,74 (.108) 10,00 (.394) 11,20 (.441) 2,84 (.112) 2,76 (.109) 10,00 (.394) 11,20 (.441) 2,84 (.112) 2,76 (.109) 10,00 (.394) 11,20 (.441) 2,84 (.112) 2,76 (.109) Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact Max Weight (grams) of all contacts per size

24 Subminiature Space onnectors *M Standard ensity 90 ent P solder Terminations / Without rackets / uropean ootprint type 1ON 1ON 2ON 2ON. Specific imensions Sizes,,, Size Termination Modifier ± 0,05 (.002) Typical 10N 0,60 (.024) 2,54 (.100) 10N 0,60 (.024) 2,84 (.112) 20N 0,76 (.030) 2,54 (.100) 20N 0,76 (.030) 2,84 (.112) ontacts Shell Size min max G ± 0.30 (.012) Pitch between contacts Male 10,10 (.398) 10,30 (.406) 5,00 (.197) 2,74 (.108) 10,10 (.398) 10,30 (.406) 5,00 (.197) 2,74 (.108) 10,30 (.406) 10,50 (.413) 5,00 (.197) 2,76 (.109) 10,30 (.406) 10,50 (.413) 5,00 (.197) 2,76 (.109) 10,30 (.406) 10,50 (.413) 5,00 (.197) 2,76 (.109) emale 10,10 (.398) 10,30 (.406) 5,00 (.197) 2,74 (.108) 10,10 (.398) 10,30 (.406) 5,00 (.197) 2,74 (.108) 10,10 (.398) 10,30 (.406) 5,00 (.197) 2,76 (.109) 10,10 (.398) 10,30 (.406) 5,00 (.197) 2,76 (.109) 10,10 (.398) 10,30 (.406) 5,00 (.197) 2,76 (.109) Termination Modifier : 10N, 10N, 20N, 20N or other termination modifier, consult factory Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact 0.24 / 0.28 / / 0.34 / 0.37 Max Weight (grams) of all contacts per size

25 Subminiature Space onnectors *M Standard ensity 90 ent P solder Terminations / With rackets / uropean ootprint Type 17N 19N 17N 19N 27N - 29N 27N 29N. Specific imensions Sizes,,, Size Termination Modifier ± 0,05 (.002) Typical 17N / 19N 0,60 (.024) 2,54 (.100) 17N / 19N 0,60 (.024) 2,84 (.112) 27N / 29N 0,76 (.030) 2,54 (.100) 27N / 29N 0,76 (.030) 2,84 (.112) 2 pieces metal brackets : "7N" : fixed with captive nuts 4-40 UN-2 "9N" : fixed with captive nuts M3 Hole I : 3,22 (.127) ± 0,10 (.004) racket width (onto P) : Shell sizes,,, : 6,10 (.240) max Shell size : 5,50 (.217) max ontacts Shell Size min max G ± 0,40 (.016) J max L Typical X ± 0,15 (.006) Pitch between contacts Male 10,10 (.398) 10,30 (.406) 4,00 (.157) 15,60 (.614) 11,52 (.454) 7,35 (.289) 2,74 (.108) 10,10 (.398) 10,30 (.406) 4,00 (.157) 15,60 (.614) 11,52 (.454) 7,35 (.289) 2,74 (.108) 10,30 (.406) 10,50 (.413) 4,00 (.157) 15,80 (.622) 11,74 (.462) 7,35 (.289) 2,76 (.109) 10,30 (.406) 10,50 (.413) 4,00 (.157) 15,80 (.622) 11,74 (.462) 7,35 (.289) 2,76 (.109) 10,30 (.406) 10,50 (.413) 4,00 (.157) 17,70 (.697) 13,16 (.518) 8,70 (.343) 2,76 (.109) emale 10,10 (.398) 10,30 (.406) 4,00 (.157) 15,60 (.614) 11,52 (.454) 7,35 (.289) 2,74 (.108) 10,10 (.398) 10,30 (.406) 4,00 (.157) 15,60 (.614) 11,52 (.454) 7,35 (.289) 2,74 (.108) 10,10 (.398) 10,30 (.406) 4,00 (.157) 15,60 (.614) 11,52 (.454) 7,35 (.289) 2,76 (.109) 10,10 (.398) 10,30 (.406) 4,00 (.157) 15,60 (.614) 11,52 (.454) 7,35 (.289) 2,76 (.109) 10,10 (.398) 10,30 (.406) 4,00 (.157) 17,50 (.689) 12,94 (.509) 8,70 (.343) 2,76 (.109) Termination Modifier : 17N, 17N, 19N, 19N, 27N, 27N, 29N, 29N or other termination modifier, consult factory Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact 0.24 / 0.28 / / 0.34 / 0.37 Max Weight (grams) of all contacts per size Max Weight (grams) of rackets Sizes,,, Size

26 Subminiature Space onnectors *M Standard ensity 90 ent P solder Terminations / With rackets / U.S. ootprint type and L. Specific imensions Sizes,,, Size Termination Modifier ± 0,05 (.002) G ± 0,37 (.015) 0,76 (.030) 3,21 (.126) L 0,76 (.030) 4,33 (.170) 1 piece plastic bracket Hole I : 3,05 (.120) ontacts Shell Size min max Typical L ± 0,25 (.010) Pitch between contacts Male 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,74 (.108) 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,74 (.108) 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,76 (.109) 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,76 (.109) 6,93 (.273) 7,43 (.293) 2,84 (.112) 1,.02 (.394) 2,76 (.109) emale 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,74 (.108) Termination Modifier :, L or other termination modifier, consult factory 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,74 (.108) 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,76 (.109) 6,93 (.273) 7,43 (.293) 2,84 (.112) 8,60 (.339) 2,76 (.109) 6,93 (.273) 7,43 (.293) 2,84 (.112) 1,.02 (.394) 2,76 (.109) Weights Shell Size Male ontact emale ontact Plastic racket Max Weight (grams) per contact 0.24 / 0.28 / / 0.34 / 0.37 Max Weight (grams) of all contacts per size

27 Subminiature Space onnectors *M Standard ensity Wire-Wrap Terminations type 179. Specific imensions Sizes,,, Size Section of termination ontacts Shell Size max G ± 0,10 (.004) Typical ± 0,01 (.0004) I ± 0,038 (.0015) Pitch between contacts Male 20,10 (.791) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,74 (.108) 20,10 (.791) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,74 (.108) 20,30 (.799) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,76 (.109) 20,30 (.799) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,76 (.109) 20,30 (.799) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,76 (.109) emale 20,10 (.791) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,74 (.108) 20,10 (.791) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,74 (.108) 20,10 (.791) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,76 (.109) 20,10 (.791) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,76 (.109) 20,10 (.791) 12,70 (.500) 2,84 (.112) 0,60 (.024) 0,826 (.0325) 2,76 (.109) Termination Modifier : 179 or other termination modifier, consult factory R : 0,05 (.002) max H : 0,02 (.001) max G : length for 3 wraps with cable WG 30 Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact Max Weight (grams) of all contacts per size

28 Subminiature Space onnectors *M Standard ensity ombination rrangements P max (oaxial ontacts) P max (Power ontacts) ontacts Shell Size Note 1 Note 2 Note 3 Note 4 Note 5 Note 6 Note 7 Note 8 Male 19,60 (.772) 22,30 (.878) 14,30 (.563) 14,40 (.567) 17,70 (.697) 19,80 (.780) 16,90 (.665) 14,60 (.575) 19,60 (.772) 22,30 (.878) 14,30 (.563) 14,40 (.567) 17,70 (.697) 19,80 (.780) 16,90 (.665) 14,60 (.575) 19,80 (.780) 22,50 (.886) 14,50 (.571) 14,60 (.575) 17,90 (.705) 20,00 (.787) 17,10 (.673) 14,80 (.583) 19,80 (.780) 22,50 (.886) 14,50 (.571) 14,60 (.575) 17,90 (.705) 20,00 (.787) 17,10 (.673) 14,80 (.583) 19,80 (.780) 22,50 (.886) 14,50 (.571) 14,60 (.575) 17,90 (.705) 20,00 (.787) 17,10 (.673) 14,80 (.583) emale 19,60 (.772) 22,30 (.878) 14,30 (.563) 14,40 (.567) 17,70 (.697) 19,80 (.780) 16,90 (.665) 14,60 (.575) 19,60 (.772) 22,30 (.878) 14,30 (.563) 14,40 (.567) 17,70 (.697) 19,80 (.780) 16,90 (.665) 14,60 (.575) 19,60 (.772) 22,30 (.878) 14,30 (.563) 14,40 (.567) 17,70 (.697) 19,80 (.780) 16,90 (.665) 14,60 (.575) 19,60 (.772) 22,30 (.878) 14,30 (.563) 14,40 (.567) 17,70 (.697) 19,80 (.780) 16,90 (.665) 14,60 (.575) 19,60 (.772) 22,30 (.878) 14,30 (.563) 14,40 (.567) 17,70 (.697) 19,80 (.780) 16,90 (.665) 14,60 (.575) Note 1 : S/S 3401/004 variants 01 / 02 / 05 / 06 / 11 / 12 / 15 / 16 Note 2 : S/S 3401/004 variants 09 / 10 / 19 / 20 Note 3 : S/S 3401/004 variants 03 / 04 / 07 / 08 Note 4 : S/S 3401/004 variants 13 / 14 / 17 / 18 Note 5 : S/S 3401/040 variants 01 / 02 / 03 / 04 / 05 / 06 Note 6 : S/S 3401/040 variants 07 / 08 Note 7 : S/S 3401/040 variants 09 / 10 Note 8 : S/S 3401/040 variants 11 / 12 ombination rrangements Shell Size 5W1 3W3 3WK3 7W2 11W1 5W5 9W4 13W3 17W2 21W1 8W8 13W6 17W5 21W4 25W3 27W2 24W7 36W4 43W2 47W1 33

29 Subminiature Space onnectors *M Standard ensity P Hole Pattern ace view, pin insert Size 9 contacts Size 15 contacts Size 25 contacts Size 37 contacts Size 50 contacts imension X 2,54 (.100) for "90 bent P / uropean ootprint Type 1xN and 2xN" 2,84 (.112) for "Straight P", "90 bent P / uropean ootprint Type 1xN and 2xN", and "90 bent P / U.S. ootprint" Recommended P hole for signal contacts 1,00 (.040) min for terminations 0,60 (.024) 1,15 (.045) min for terminations 0,76 (.030) 34

30 Subminiature Space onnectors *M Standard ensity How to order S/S Quality Level M Y 25 P NM OL3 Termination modifier Solder buckets: Nothing Straight P: OL3, Z 90 bent P without brackets 10N, 10N, 20N, 20N 90 bent P with brackets 17N, 17N, 19N, 19N, 27N, 29N Wire-wrap: 179 Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) Number of contacts for variant 01 : : 9 : 15 : 25 :: Number of contacts for combination arrangements: : 5W1 : 3W3, 3WK3, 7W2, 11W1 : 5W5, 9W4, 13W3, 21W1 : 8W8, 13W6, 17W5, 21W4, 25W3, 27W2 : 24W7, 36W4, 43W2, 47W1 ixing option : xcept for terminations Nothing : Standard through hole 1(2)()7(9)N,, L : aptive nut ( not applicable for size ) Y: ual float mount Insert type : M for one-piece insert Shell size Series Testing level Variant 01: Standard density etail specification number 35

31 Subminiature Space onnectors *M Standard ensity How to order R023 Quality Level M M Y 25 P NM M R023 Suffix for MIL lass M Quality Level (onnector Specification R023) Termination modifier Solder buckets: Nothing Straight P: OL3, M, Z 90 bent P without brackets 10N, 10N, 20N, 20N 90 bent P with brackets 17N, 17N, 19N, 19N, 27N, 29N,, L Wire-wrap: 179 Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) Number of contacts for variant 01 : : 9 : 15 : 25 :: Number of contacts for combination arrangements: : 5W1 : 3W3, 3WK3, 7W2, 11W1 : 5W5, 9W4, 13W3, 21W1 : 8W8, 13W6, 17W5, 21W4, 25W3, 27W2 : 24W7, 36W4, 43W2, 47W1 ixing option : xcept for terminations Nothing : Standard through hole 1(2)()7(9)N,, L : aptive nut ( not applicable for size ) Y: ual float mount ccording to MIL-TL Specification Insert type : M for one-piece insert Shell size Series 36

32 Subminiature Space onnectors *M Standard ensity How to order R022 Quality Level M Y 25 P NM M R022 Suffix for MIL lass M Quality Level (onnector Specification R022) Termination modifier Solder buckets: Nothing Straight P: OL3, M, Z 90 bent P without brackets 10N, 10N, 20N, 20N 90 bent P with brackets 17N, 17N, 19N, 19N, 27N, 29N,, L Wire-wrap: 179 Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) Number of contacts for variant 01 : : 9 : 15 : 25 :: Number of contacts for combination arrangements: : 5W1 : 3W3, 3WK3, 7W2, 11W1 : 5W5, 9W4, 13W3, 21W1 : 8W8, 13W6, 17W5, 21W4, 25W3, 27W2 : 24W7, 36W4, 43W2, 47W1 ixing option : xcept for terminations Nothing : Standard through hole 1(2)()7(9)N,, L : aptive nut ( not applicable for size ) Y: ual float mount Insert type : M for one-piece insert Shell size Series 37

33 Subminiature Space onnectors *M Standard ensity ross References Type escription S/S escription R023 escription R022 Solder bucket M*9PNM MM*9PNM-R023 M*9PNM-R M*9SNM MM*9SNM-R023 M*9SNM-R M*15PNM MM*15PNM-R023 M*15PNM-R M*15SNM MM*15SNM-R023 M*15SNM-R M*25PNM MM*25PNM-R023 M*25PNM-R M*25SNM MM*25SNM-R023 M*25SNM-R M*37PNM MM*37PNM-R023 M*37PNM-R M*37SNM MM*37SNM-R023 M*37SNM-R M*50PNM MM*50PNM-R023 M*50PNM-R M*50SNM MM*50SNM-R023 M*50SNM-R022 Straight P M*9PNMOL3 MM*9PNMOL3-R023 M*9PNMOL3-R M*9SNMOL3 MM*9SNMOL3-R023 M*9SNMOL3-R M*15PNMOL3 MM*15PNMOL3-R023 M*15PNMOL3-R M*15SNMOL3 MM*15SNMOL3-R023 M*15SNMOL3-R M*25PNMOL3 MM*25PNMOL3-R023 M*25PNMOL3-R M*25SNMOL3 MM*25SNMOL3-R023 M*25SNMOL3-R M*37PNMOL3 MM*37PNMOL3-R023 M*37PNMOL3-R M*37SNMOL3 MM*37SNMOL3-R023 M*37SNMOL3-R M*50PNMOL3 MM*50PNMOL3-R023 M*50PNMOL3-R M*50SNMOL3 MM*50SNMOL3-R023 M*50SNMOL3-R022 MM*9PNMM-R023 MM*9SNMM-R023 MM*15PNMM-R023 MM*15SNMM-R023 MM*25PNMM-R023 MM*25SNMM-R023 MM*37PNMM-R023 MM*37SNMM-R023 MM*50PNMM-R023 MM*50SNMM-R023 M*9PNMM-R022 M*9SNMM-R022 M*15PNMM-R022 M*15SNMM-R022 M*25PNMM-R022 M*25SNMM-R022 M*37PNMM-R022 M*37SNMM-R022 M*50PNMM-R022 M*50SNMM-R M*9PNMZ MM*9PNMZ-R023 M*9PNMZ-R M*9SNMZ MM*9SNMZ-R023 M*9SNMZ-R M*15PNMZ MM*15PNMZ-R023 M*15PNMZ-R M*15SNMZ MM*15SNMZ-R023 M*15SNMZ-R M*25PNMZ MM*25PNMZ-R023 M*25PNMZ-R M*25SNMZ MM*25SNMZ-R023 M*25SNMZ-R M*37PNMZ MM*37PNMZ-R023 M*37PNMZ-R M*37SNMZ MM*37SNMZ-R023 M*37SNMZ-R M*50PNMZ MM*50PNMZ-R023 M*50PNMZ-R M*50SNMZ MM*50SNMZ-R023 M*50SNMZ-R022 * : remove when the standard through hole option is required replace by the letter "" when the captive nut option is required replace by the letter "Y" when the dual float mount option is required 38

34 Subminiature Space onnectors *M Standard ensity ross References Type escription S/S escription R023 escription R bent P M*9PNM10N MM*9PNM10N-R023 M*9PNM10N-R022 (without brackets) M*9SNM10N MM*9SNM10N-R023 M*9SNM10N-R M*15PNM10N MM*15PNM10N-R023 M*15PNM10N-R M*15SNM10N MM*15SNM10N-R023 M*15SNM10N-R M*25PNM10N MM*25PNM10N-R023 M*25PNM10N-R M*25SNM10N MM*25SNM10N-R023 M*25SNM10N-R M*37PNM10N MM*37PNM10N-R023 M*37PNM10N-R M*37SNM10N MM*37SNM10N-R023 M*37SNM10N-R M*50PNM10N MM*50PNM10N-R023 M*50PNM10N-R M*50SNM10N MM*50SNM10N-R023 M*50SNM10N-R M*9PNM10N MM*9PNM10N-R023 M*9PNM10N-R M*9SNM10N MM*9SNM10N-R023 M*9SNM10N-R M*15PNM10N MM*15PNM10N-R023 M*15PNM10N-R M*15SNM10N MM*15SNM10N-R023 M*15SNM10N-R M*25PNM10N MM*25PNM10N-R023 M*25PNM10N-R M*25SNM10N MM*25SNM10N-R023 M*25SNM10N-R M*37PNM10N MM*37PNM10N-R023 M*37PNM10N-R M*37SNM10N MM*37SNM10N-R023 M*37SNM10N-R M*50PNM10N MM*50PNM10N-R023 M*50PNM10N-R M*50SNM10N MM*50SNM10N-R023 M*50SNM10N-R M*9PNM20N MM*9PNM20N-R023 M*9PNM20N-R M*9SNM20N MM*9SNM20N-R023 M*9SNM20N-R M*15PNM20N MM*15PNM20N-R023 M*15PNM20N-R M*15SNM20N MM*15SNM20N-R023 M*15SNM20N-R M*25PNM20N MM*25PNM20N-R023 M*25PNM20N-R M*25SNM20N MM*25SNM20N-R023 M*25SNM20N-R M*37PNM20N MM*37PNM20N-R023 M*37PNM20N-R M*37SNM20N MM*37SNM20N-R023 M*37SNM20N-R M*50PNM20N MM*50PNM20N-R023 M*50PNM20N-R M*50SNM20N MM*50SNM20N-R023 M*50SNM20N-R M*9PNM20N MM*9PNM20N-R023 M*9PNM20N-R M*9SNM20N MM*9SNM20N-R023 M*9SNM20N-R M*15PNM20N MM*15PNM20N-R023 M*15PNM20N-R M*15SNM20N MM*15SNM20N-R023 M*15SNM20N-R M*25PNM20N MM*25PNM20N-R023 M*25PNM20N-R M*25SNM20N MM*25SNM20N-R023 M*25SNM20N-R M*37PNM20N MM*37PNM20N-R023 M*37PNM20N-R M*37SNM20N MM*37SNM20N-R023 M*37SNM20N-R M*50PNM20N MM*50PNM20N-R023 M*50PNM20N-R M*50SNM20N MM*50SNM20N-R023 M*50SNM20N-R022 * : remove when the standard through hole option is required replace by the letter "" when the captive nut option is required replace by the letter "Y" when the dual float mount option is required 39

35 Subminiature Space onnectors *M Standard ensity ross References Type escription S/S escription R023 escription R bent P M9PNM17N MM9PNM17N-R023 M9PNM17N-R022 (with brackets) M9SNM17N MM9SNM17N-R023 M9SNM17N-R M15PNM17N MM15PNM17N-R023 M15PNM17N-R M15SNM17N MM15SNM17N-R023 M15SNM17N-R M25PNM17N MM25PNM17N-R023 M25PNM17N-R M25SNM17N MM25SNM17N-R023 M25SNM17N-R M37PNM17N MM37PNM17N-R023 M37PNM17N-R M37SNM17N MM37SNM17N-R023 M37SNM17N-R M50PNM17N MM50PNM17N-R023 M50PNM17N-R M50SNM17N MM50SNM17N-R023 M50SNM17N-R M9PNM17N MM9PNM17N-R023 M9PNM17N-R M9SNM17N MM9SNM17N-R023 M9SNM17N-R M15PNM17N MM15PNM17N-R023 M15PNM17N-R M15SNM17N MM15SNM17N-R023 M15SNM17N-R M25PNM17N MM25PNM17N-R023 M25PNM17N-R M25SNM17N MM25SNM17N-R023 M25SNM17N-R M37PNM17N MM37PNM17N-R023 M37PNM17N-R M37SNM17N MM37SNM17N-R023 M37SNM17N-R M50PNM17N MM50PNM17N-R023 M50PNM17N-R M50SNM17N MM50SNM17N-R023 M50SNM17N-R M9PNM19N MM9PNM19N-R023 M9PNM19N-R M9SNM19N MM9SNM19N-R023 M9SNM19N-R M15PNM19N MM15PNM19N-R023 M15PNM19N-R M15SNM19N MM15SNM19N-R023 M15SNM19N-R M25PNM19N MM25PNM19N-R023 M25PNM19N-R M25SNM19N MM25SNM19N-R023 M25SNM19N-R M37PNM19N MM37PNM19N-R023 M37PNM19N-R M37SNM19N MM37SNM19N-R023 M37SNM19N-R M50PNM19N MM50PNM19N-R023 M50PNM19N-R M50SNM19N MM50SNM19N-R023 M50SNM19N-R M9PNM19N MM9PNM19N-R023 M9PNM19N-R M9SNM19N MM9SNM19N-R023 M9SNM19N-R M15PNM19N MM15PNM19N-R023 M15PNM19N-R M15SNM19N MM15SNM19N-R023 M15SNM19N-R M25PNM19N MM25PNM19N-R023 M25PNM19N-R M25SNM19N MM25SNM19N-R023 M25SNM19N-R M37PNM19N MM37PNM19N-R023 M37PNM19N-R M37SNM19N MM37SNM19N-R023 M37SNM19N-R M50PNM19N MM50PNM19N-R023 M50PNM19N-R M50SNM19N MM50SNM19N-R023 M50SNM19N-R022 40

36 Subminiature Space onnectors *M Standard ensity ross References Type escription S/S escription R023 escription R bent P M9PNM27N MM9PNM27N-R023 M9PNM27N-R022 (with brackets) M9SNM27N MM9SNM27N-R023 M9SNM27N-R M15PNM27N MM15PNM27N-R023 M15PNM27N-R M15SNM27N MM15SNM27N-R023 M15SNM27N-R M25PNM27N MM25PNM27N-R023 M25PNM27N-R M25SNM27N MM25SNM27N-R023 M25SNM27N-R M37PNM27N MM37PNM27N-R023 M37PNM27N-R M37SNM27N MM37SNM27N-R023 M37SNM27N-R M50PNM27N MM50PNM27N-R023 M50PNM27N-R M50SNM27N MM50SNM27N-R023 M50SNM27N-R M9PNM27N MM9PNM27N-R023 M9PNM27N-R M9SNM27N MM9SNM27N-R023 M9SNM27N-R M15PNM27N MM15PNM27N-R023 M15PNM27N-R M15SNM27N MM15SNM27N-R023 M15SNM27N-R M25PNM27N MM25PNM27N-R023 M25PNM27N-R M25SNM27N MM25SNM27N-R023 M25SNM27N-R M37PNM27N MM37PNM27N-R023 M37PNM27N-R M37SNM27N MM37SNM27N-R023 M37SNM27N-R M50PNM27N MM50PNM27N-R023 M50PNM27N-R M50SNM27N MM50SNM27N-R023 M50SNM27N-R M9PNM29N MM9PNM29N-R023 M9PNM29N-R M9SNM29N MM9SNM29N-R023 M9SNM29N-R M15PNM29N MM15PNM29N-R023 M15PNM29N-R M15SNM29N MM15SNM29N-R023 M15SNM29N-R M25PNM29N MM25PNM29N-R023 M25PNM29N-R M25SNM29N MM25SNM29N-R023 M25SNM29N-R M37PNM29N MM37PNM29N-R023 M37PNM29N-R M37SNM29N MM37SNM29N-R023 M37SNM29N-R M50PNM29N MM50PNM29N-R023 M50PNM29N-R M50SNM29N MM50SNM29N-R023 M50SNM29N-R M9PNM29N MM9PNM29N-R023 M9PNM29N-R M9SNM29N MM9SNM29N-R023 M9SNM29N-R M15PNM29N MM15PNM29N-R023 M15PNM29N-R M15SNM29N MM15SNM29N-R023 M15SNM29N-R M25PNM29N MM25PNM29N-R023 M25PNM29N-R M25SNM29N MM25SNM29N-R023 M25SNM29N-R M37PNM29N MM37PNM29N-R023 M37PNM29N-R M37SNM29N MM37SNM29N-R023 M37SNM29N-R M50PNM29N MM50PNM29N-R023 M50PNM29N-R M50SNM29N MM50SNM29N-R023 M50SNM29N-R022 41

37 Subminiature Space onnectors *M Standard ensity ross References Type escription S/S escription R023 escription R bent P MM9PNM-R023 M9PNM-R022 (with brackets) MM9SNM-R023 M9SNM-R022 MM15PNM-R023 M15PNM-R022 MM15SNM-R023 M15SNM-R022 MM25PNM-R023 M25PNM-R022 MM25SNM-R023 M25SNM-R022 MM37PNM-R023 M37PNM-R022 MM37SNM-R023 M37SNM-R022 MM50PNM-R023 M50PNM-R022 MM50SNM-R023 M50SNM-R022 MM9PNML-R023 MM9SNML-R023 MM15PNML-R023 MM15SNML-R023 MM25PNML-R023 MM25SNML-R023 MM37PNML-R023 MM37SNML-R023 MM50PNML-R023 MM50SNML-R023 M9PNML-R022 M9SNML-R022 M15PNML-R022 M15SNML-R022 M25PNML-R022 M25SNML-R022 M37PNML-R022 M37SNML-R022 M50PNML-R022 M50SNML-R022 Wire-wrap M*9PNM179 MM*9PNM179-R023 M*9PNM179-R M*9SNM179 MM*9SNM179-R023 M*9SNM179-R M*15PNM179 MM*15PNM179-R023 M*15PNM179-R M*15SNM179 MM*15SNM179-R023 M*15SNM179-R M*25PNM179 MM*25PNM179-R023 M*25PNM179-R M*25SNM179 MM*25SNM179-R023 M*25SNM179-R M*37PNM179 MM*37PNM179-R023 M*37PNM179-R M*37SNM179 MM*37SNM179-R023 M*37SNM179-R M*50PNM179 MM*50PNM179-R023 M*50PNM179-R M*50SNM179 MM*50SNM179-R023 M*50SNM179-R022 * : remove when the standard through hole option is required replace by the letter "" when the captive nut option is required replace by the letter "Y" when the dual float mount option is required 42

38 Subminiature Space onnectors *M Standard ensity ross References Type escription S/S escription R023 escription R022 ombination arrangements M*5W1PNM MM*5W1PNM-R023 M*5W1PNM-R022 With solder bucket** M*5W1SNM MM*5W1SNM-R023 M*5W1SNM-R M*3W3PNM MM*3W3PNM-R023 M*3W3PNM-R M*3W3SNM MM*3W3SNM-R023 M*3W3SNM-R M*3WK3PNM MM*3WK3PNM-R023 M*3WK3PNM-R M*3WK3SNM MM*3WK3SNM-R023 M*3WK3SNM-R M*7W2PNM MM*7W2PNM-R023 M*7W2PNM-R M*7W2SNM MM*7W2SNM-R023 M*7W2SNM-R M*11W1PNM MM*11W1PNM-R023 M*11W1PNM-R M*11W1SNM MM*11W1SNM-R023 M*11W1SNM-R M*5W5PNM MM*5W5PNM-R023 M*5W5PNM-R M*5W5SNM MM*5W5SNM-R023 M*5W5SNM-R M*9W4PNM MM*9W4PNM-R023 M*9W4PNM-R M*9W4SNM MM*9W4SNM-R023 M*9W4SNM-R M*13W3PNM MM*13W3PNM-R023 M*13W3PNM-R M*13W3SNM MM*13W3SNM-R023 M*13W3SNM-R M*17W2PNM MM*17W2PNM-R023 M*17W2PNM-R M*17W2SNM MM*17W2SNM-R023 M*17W2SNM-R M*21W1PNM MM*21W1PNM-R023 M*21W1PNM-R M*21W1SNM MM*21W1SNM-R023 M*21W1SNM-R M*8W8PNM MM*8W8PNM-R023 M*8W8PNM-R M*8W8SNM MM*8W8SNM-R023 M*8W8SNM-R M*13W6PNM MM*13W6PNM-R023 M*13W6PNM-R M*13W6SNM MM*13W6SNM-R023 M*13W6SNM-R M*17W5PNM MM*17W5PNM-R023 M*17W5PNM-R M*17W5SNM MM*17W5SNM-R023 M*17W5SNM-R M*21W4PNM MM*21W4PNM-R023 M*21W4PNM-R M*21W4SNM MM*21W4SNM-R023 M*21W4SNM-R M*25W3PNM MM*25W3PNM-R023 M*25W3PNM-R M*25W3SNM MM*25W3SNM-R023 M*25W3SNM-R M*27W2PNM MM*27W2PNM-R023 M*27W2PNM-R M*27W2SNM MM*27W2SNM-R023 M*27W2SNM-R M*24W7PNM MM*24W7PNM-R023 M*24W7PNM-R M*24W7SNM MM*24W7SNM-R023 M*24W7SNM-R M*36W4PNM MM*36W4PNM-R023 M*36W4PNM-R M*36W4SNM MM*36W4SNM-R023 M*36W4SNM-R M*43W2PNM MM*43W2PNM-R023 M*43W2PNM-R M*43W2SNM MM*43W2SNM-R023 M*43W2SNM-R M*47W1PNM MM*47W1PNM-R023 M*47W1PNM-R M*47W1SNM MM*47W1SNM-R023 M*47W1SNM-R022 * : remove when the standard through hole option is required replace by the letter "" when the captive nut option is required replace by the letter "Y" when the dual float mount option is required ** : or other terminations, consult factory. 43

39 Subminiature Space onnectors *M High ensity Product eatures onnectors with solder type termination contacts size 22 inserted into two-piece insulators. Termination types available : - Straight P solder terminations - 90 bent P solder terminations Packaging unit : 1 piece (plastic bag) ust cap supplied with each connector, only for quality level S/S Specific imensions Termination Types : Straight P Solder 90 ent P Solder / Without racket 90 ent P Solder / With Monobloc rackets Z2 : to accomodate a 0,75 (.0295) / 0,77 (.0305) diameter pin Male connector emale connector Shell Size V max W1 min (ull pin diameter) W1 max (ull pin length) Z1 min Z1 max W2 min (Square ended pin) 0,40 (.016) 4,43 (.174) 5,45 (.215) 0,75 (.0295) 0,77 (.0305) 3,63 (.143) 0,40 (.016) 4,43 (.174) 5,45 (.215) 0,75 (.0295) 0,77 (.0305) 3,63 (.143) 0,60 (.024) 4,33 (.170) 5,45 (.215) 0,75 (.0295) 0,77 (.0305) 3,63 (.143) 0,60 (.024) 4,33 (.170) 5,45 (.215) 0,75 (.0295) 0,77 (.0305) 3,63 (.143) 0,60 (.024) 4,33 (.170) 5,45 (.215) 0,75 (.0295) 0,77 (.0305) 3,63 (.143) 0,60 (.024) 4,33 (.170) 5,45 (.215) 0,75 (.0295) 0,77 (.0305) 3,63 (.143) Weights Max Weight (grams) without contacts or accessories Shell Size Weight (Grams) or the total connector weight, add the weight of the contacts and of the eventual accessories

40 Subminiature Space onnectors *M High ensity Straight P solder Terminations Termination Modifier ± 0,07 (.003) G OL3 0,57 (.022) 4,70 (.185) ± 0,1 (.004) Specific imensions M2 0,51 (.020) 4,00 (.157) ± 0,5 (.020) OL3 / Sizes,,, M2/Sizes,,, OL3/Size M2/Size Termination type OL3 shell size Termination type M2 shell size ontacts Shell Size max H max L max Typical Pitch between contacts Male 16,01 (.630) 11,21 (.441) 9,53 (.375) 1,98 (.078) 2,29 (.090) 16,01 (.630) 11,21 (.441) 9,53 (.375) 1,98 (.078) 2,29 (.090) 16,21 (.638) 11,41 (.449) 9,53 (.375) 1,98 (.078) 2,29 (.090) 16,21 (.638) 11,41 (.449) 9,53 (.375) 1,98 (.078) 2,41 (.095) 16,21 (.638) 11,41 (.449) 9,53 (.375) 2,08 (.082) 2,41 (.095) 16,21 (.638) 11,41 (.449) 9,53 (.375) 2,08 (.082) 2,41 (.095) emale 16,17 (.637) 11,37 (.448) 9,53 (.375) 1,98 (.078) 2,29 (.090) 16,17 (.637) 11,37 (.448) 9,53 (.375) 1,98 (.078) 2,29 (.090) 16,17 (.637) 11,37 (.448) 9,53 (.375) 1,98 (.078) 2,29 (.090) 16,17 (.637) 11,37 (.448) 9,53 (.375) 1,98 (.078) 2,41 (.095) 16,17 (.637) 11,37 (.448) 9,53 (.375) 2,08 (.082) 2,41 (.095) 16,17 (.637) 11,37 (.448) 9,53 (.375) 2,08 (.082) 2,41 (.095) Termination Modifier : OL3, M2; or other termination modifier, consult factory Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact Max Weight (grams) of all contacts per size

41 Subminiature Space onnectors *M High ensity 90 ent P solder Terminations / Without rackets / uropean ootprint Specific imensions Sizes,,, Size Termination Modifier ± 0,07 (.003) Typical 10N 0,57 (.022) 1,98 (.078) 10N 0,57 (.022) 2,08 (.082) ontacts Shell Size min max G ± 0,30 (.012) M min Pitch between contacts Male 11,98 (.472) 12,48 (.491) 5,00 (.197) 5,30 (.209) 2,29 (.090) 11,98 (.472) 12,48 (.491) 5,00 (.197) 5,30 (.209) 2,29 (.090) 12,18 (.480) 12,68 (.499) 5,00 (.197) 5,30 (.209) 2,29 (.090) 12,18 (.480) 12,68 (.499) 5,00 (.197) 5,30 (.209) 2,41 (.095) 12,18 (.480) 12,68 (.499) 5,00 (.197) 5,30 (.209) 2,41 (.095) emale 11,98 (.472) 12,48 (.491) 5,00 (.197) 5,30 (.209) 2,29 (.090) Termination Modifier : 10N, 10N or other termination modifier, consult factory 11,98 (.472) 12,48 (.491) 5,00 (.197) 5,30 (.209) 2,29 (.090) 11,98 (.472) 12,48 (.491) 5,00 (.197) 5,30 (.209) 2,29 (.090) 11,98 (.472) 12,48 (.491) 5,00 (.197) 5,30 (.209) 2,41 (.095) 11,98 (.472) 12,48 (.491) 5,00 (.197) 5,30 (.209) 2,41 (.095) Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact Max Weight (grams) of all contacts per size

42 Subminiature Space onnectors *M High ensity 90 ent P solder Terminations / With rackets / uropean ootprint Specific imensions Sizes,,, Size Termination Modifier ± 0,07 (.003) Typical 17N 0,57 (.022) 1,98 (.078) 17N 0,57 (.022) 2,08 (.082) 19N 0,57 (.022) 1,98 (.078) 19N 0,57 (.022) 2,08 (.082) 2 pieces metal brackets : "7N" : fixed with captive nuts 4-40 UN-2 "9N" : fixed with captive nuts M3 Oval hole I : 3,22 (.127) ± 0,10 (.004) x 4,90 (.193) ± 0,10 (.004) ontacts Shell Size min max G ± 0,40 (.016) J max L Typical X ± 0,10 (.004) Pitch between contacts Male 11,98 (.472) 12,48 (.491) 4,00 (.157) 18,30 (.720) 14,21 (.559) 7,35 (.289) 2,29 (.090) 11,98 (.472) 12,48 (.491) 4,00 (.157) 18,30 (.720) 14,21 (.559) 7,35 (.289) 2,29 (.090) 12,18 (.480) 12,68 (.499) 4,00 (.157) 18,50 (.728) 14,41 (.567) 7,35 (.289) 2,29 (.090) 12,18 (.480) 12,68 (.499) 4,00 (.157) 18,50 (.728) 14,41 (.567) 7,35 (.289) 2,41 (.095) 12,18 (.480) 12,68 (.499) 4,00 (.157) 20,70 (.815) 15,55 (.612) 8,70 (.343) 2,41 (.095) emale 11,98 (.472) 12,48 (.491) 4,00 (.157) 18,30 (.720) 14,21 (.559) 7,35 (.289) 2,29 (.090) 11,98 (.472) 12,48 (.491) 4,00 (.157) 18,30 (.720) 14,21 (.559) 7,35 (.289) 2,29 (.090) 11,98 (.472) 12,48 (.491) 4,00 (.157) 18,30 (.720) 14,21 (.559) 7,35 (.289) 2,29 (.090) 11,98 (.472) 12,48 (.491) 4,00 (.157) 18,30 (.720) 14,21 (.559) 7,35 (.289) 2,41 (.095) 11,98 (.472) 12,48 (.491) 4,00 (.157) 20,50 (.807) 15,35 (.604) 8,70 (.343) 2,41 (.095) Termination Modifier : 17N, 17N, 19N, 19N or other termination modifier, consult factory Weights Shell Size Male ontact emale ontact Max Weight (grams) per contact Max Weight (grams) of all contacts per size Max Weight (grams) of rackets Sizes,,, Size

43 Subminiature Space onnectors *M High ensity 90 ent P solder Terminations / With rackets / U.S. ootprint Specific imensions Sizes,,, Size Termination Modifier ± 0,07 (.003) G ± 0,70 (.027) 2 0,51 (.020) 3,21 (.126) Monobloc plastic bracket Hole I : 3,05 (.120) ontacts Shell Size min max Typical L ± 0,38 (.015) Pitch between contacts Male 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,29 (.090) 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,29 (.090) 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,29 (.090) 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,41 (.095) 11,18 (.440) 11,68 (.460) 2,08 (.082) (.606) 2,41 (.095) emale 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,29 (.090) 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,29 (.090) 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,29 (.090) 11,18 (.440) 11,68 (.460) 1,98 (.078) 13,82 (.544) 2,41 (.095) 11,18 (.440) 11,68 (.460) 2,08 (.082) (.606) 2,41 (.095) Termination Modifier : 2 or other termination modifier, consult factory Weights Shell Size Male ontact emale ontact rackets + Strap Max Weight (grams) per contact Max Weight (grams) of all contacts per size To be defined To be defined To be defined To be defined To be defined 48

44 Subminiature Space onnectors *M High ensity P Hole Pattern ace view, pin insert for plug) (use a mirror image for receptacle Size 15 contacts Size 26 contacts Size 44 contacts Size 62 contacts Size 78 contacts Size 104 contacts imension X 1,98 (.078) for sizes,,, 2,08 (.082) for size and Recommended P hole for signal contacts 0,90 (.035) min for terminations 0,51 (.020) (M2) Termination 1,00 (.040) min for terminations 0,57 (.022) (OL3) Termination 49

45 Subminiature Space onnectors *M High ensity How to order S/S Quality Level M Y 44 P NM xxx OL3 Termination modifier Straight P: OL3, M2 90 bent P without brackets 10N, 10N except size 90 bent P with brackets 17N, 17N, 19N, 19N e xcept size Shell inish for size only: 174 (25.4 m Ni) R172: 0.7 m gold over 25.4 m Ni Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) : 15 : 26 : 44 : : 104 ixing option xcept for terminations 1,()7(9)N Nothing : Standard through hole : aptive nut ( not applicable for size ) Y: ual float mount Insert type: M for two-piece insert Shell size Series Testing level Variant 02: High density etail specification number 50

46 Subminiature Space onnectors *M High ensity How to order R023 Quality Level M M Y 44 P NM xxx M2 R023 Suffix for MIL lass M Quality (onnector Specification R023) Termination modifier Straight P: OL3, M2 90 bent P without 10N, 10N brackets 90 bent P with 17N, 17N, 19N, 19N, 2 brackets Shell inish for size 174 (25.4 m Ni) only: R172: 0.7 m gold over 25.4 m Ni Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement (number of contacts) : 15 : 26 : 44 : ixing option xcept for terminations 1,()7(9)N Nothing : Standard through hole : aptive nut ( not applicable for size ) Y: ual float mount ccording to MIL-TL Specification Insert type: M for two-piece insert Shell size Series 51

47 Subminiature Space onnectors *M High ensity How to order R022 Quality Level M Y 44 P NM XXX OL3 R022 Suffix for ommercial Space Grade Quality Level (onnector Specification R022) Termination modifier Straight P: OL3, M2 90 bent P without 10N, 10N brackets - except size 90 bent P with 17N, 17N, 19N, 19N, 2 brackets Shell inish for size only: Magnetism level NM : NM : Type of contact P : S : ontact arrangement (number of contacts) : 15 : 26 : 44 : ixing option Nothing : Insert type: Shell size Series - except size 174 (25.4 m Ni) R172: 0.7 m gold over 25.4 m Ni 200 Gamma 20 Gamma (on special request) Pin (Male) Socket (emale) xcept for terminations 1,()7(9)N Standard through hole : aptive nut ( not applicable for size ) Y: ual float mount M for two-piece insert 52

48 Subminiature Space onnectors *M High ensity ross References Type escription S/S escription R023 escription R022 Straight P M*15PNMOL3 MM*15PNMOL3-R023 M*15PNMOL3-R M*15SNMOL3 MM*15SNMOL3-R023 M*15SNMOL3-R M*26PNMOL3 MM*26PNMOL3-R023 M*26PNMOL3-R M*26SNMOL3 MM*26SNMOL3-R023 M*26SNMOL3-R M*44PNMOL3 MM*44PNMOL3-R023 M*44PNMOL3-R M*44SNMOL3 MM*44SNMOL3-R023 M*44SNMOL3-R M*62PNMOL3 MM*62PNMOL3-R023 M*62PNMOL3-R M*62SNMOL3 MM*62SNMOL3-R023 M*62SNMOL3-R M*78PNMOL3 MM*78PNMOL3-R023 M*78PNMOL3-R M*78SNMOL3 MM*78SNMOL3-R023 M*78SNMOL3-R022 MM*15PNMM2-R023 MM*15SNMM2-R023 MM*26PNMM2-R023 MM*26SNMM2-R023 MM*44PNMM2-R023 MM*44SNMM2-R023 MM*62PNMM2-R023 MM*62SNMM2-R023 MM*78PNMM2-R023 MM*78SNMM2-R023 M*15PNMM2-R022 M*15SNMM2-R022 M*26PNMM2-R022 M*26SNMM2-R022 M*44PNMM2-R022 M*44SNMM2-R022 M*62PNMM2-R022 M*62SNMM2-R022 M*78PNMM2-R022 M*78SNMM2-R022 Type escription S/S escription R023 escription R022 Straight P M*104PNMOL3-174 MM*104PNMOL3-174-R023 M*104PNMOL3-174-R M*104SNMOL3-174 MM*104SNMOL3-174-R023 M*104SNMOL3-174-R M*104PNMOL3-R172 MM*104PNMOL3-R172-R023 M*104PNMOL3-R172-R M*104SNMOL3-R172 MM*104SNMOL3-R172-R023 M*104SNMOL3-R172-R M*104PNMM2-174 MM*104PNMM2-174-R023 M*104PNMM2-174-R M*104SNMM2-174 MM*104SNMM2-174-R023 M*104SNMM2-174-R M*104PNMM2-R172 MM*104PNMM2-R172-R023 M*104PNMM2-R172-R M*104SNMM2-R172 MM*104SNMM2-R172-R023 M*104SNMM2-R172-R022 * : remove when the standard through hole option is required replace by the letter "Y" when the dual float mount option is required 90 bent P M*15PNM10N MM*15PNM10N-R023 M*15PNM10N-R022 (without brackets) M*15SNM10N MM*15SNM10N-R023 M*15PNM10N-R M*26PNM10N MM*26PNM10N-R023 M*26PNM10N-R M*26SNM10N MM*26SNM10N-R023 M*26SNM10N-R M*44PNM10N MM*44PNM10N-R023 M*44PNM10N-R M*44SNM10N MM*44SNM10N-R023 M*44SNM10N-R M*62PNM10N MM*62PNM10N-R023 M*62PNM10N-R M*62SNM10N MM*62SNM10N-R023 M*62SNM10N-R M*78PNM10N MM*78PNM10N-R023 M*78PNM10N-R M*78SNM10N MM*78SNM10N-R023 M*78SNM10N-R022 * : remove when the standard through hole option is required replace by the letter "" when the captive nut option is required replace by the letter "Y" when the dual float mount option is required 53

49 Subminiature Space onnectors *M High ensity ross References Type escription S/S escription R023 escription R bent P M15PNM17N MM15PNM17N-R023 M15PNM17N-R022 (with brackets) M15SNM17N MM15SNM17N-R023 M15SNM17N-R M26PNM17N MM26PNM17N-R023 M26PNM17N-R M26SNM17N MM26SNM17N-R023 M26SNM17N-R M44PNM17N MM44PNM17N-R023 M44PNM17N-R M44SNM17N MM44SNM17N-R023 M44SNM17N-R M62PNM17N MM62PNM17N-R023 M62PNM17N-R M62SNM17N MM62SNM17N-R023 M62SNM17N-R M78PNM17N MM78PNM17N-R023 M78PNM17N-R M78SNM17N MM78SNM17N-R023 M78SNM17N-R M15PNM19N MM15PNM19N-R023 M15PNM19N-R M15SNM19N MM15SNM19N-R023 M15SNM19N-R M26PNM19N MM26PNM19N-R023 M26PNM19N-R M26SNM19N MM26SNM19N-R023 M26SNM19N-R M44PNM19N MM44PNM19N-R023 M44PNM19N-R M44SNM19N MM44SNM19N-R023 M44SNM19N-R M62PNM19N MM62PNM19N-R023 M62PNM19N-R M62SNM19N MM62SNM19N-R023 M62SNM19N-R M78PNM19N MM78PNM19N-R023 M78PNM19N-R M78SNM19N MM78SNM19N-R023 M78SNM19N-R022 MM15PNM2-R023 MM15SNM2-R023 MM26PNM2-R023 MM26SNM2-R023 MM44PNM2-R023 MM44SNM2-R023 MM62PNM2-R023 MM62SNM2-R023 MM78PNM2-R023 MM78SNM2-R023 M15PNM2-R022 M15SNM2-R022 M26PNM2-R022 M26SNM2-R022 M44PNM2-R022 M44SNM2-R022 M62PNM2-R022 M62SNM2-R022 M78PNM2-R022 M78SNM2-R022 54

50 Subminiature Space onnectors *M/*M High ensity 104 ontacts Introduction. The S / S specification 3401 does specify a Sub High density layout with 104 contacts. Specified versions are: *M with straight P solder termination *M with removeable crimp contacts *M onnector Savers Product eatures High density layout : 104 contacts Shell size Male screwlock ackshell option ixing option ust cap : : Same as for the shell size Pin (Variants 05, 52, 68 and 76 of the S/S 3401/022 etail Specification) : Not available : Not available : Not available Materials and inishes Shell material : luminium alloy Shell finish 174 : 25,4 m (1000 in) min electroless Nickel (Modification code 174) Shell finish R172 : 0,70 m (28 in) min Gold over 25,4 m (1000 in) electroless Nickel (Modification code R172) Performance Specifications Mating orce Unmating orce : 295 (N max) : 20.3 / 177 (N min / N max) ontact avity rrangements ace view pin inserts (use a mirror image for receptacle inserts) Shell size ontact rrangement 104 ontact Size # 22 55

51 Subminiature Space onnectors *M/*M High ensity 104 ontacts Shell imensions Plug (mating side) Receptacle (mating side) Shell Size mm ± 0,38 ± 0,13 ± 0,13 ± 0,13 ± 0,38 ± 0,25 Plug 69,32 56,18 63,50 12,77 17,30 12,85 59,00 15,70 6,74 5,84 0,90 5,30 15,37 Receptacle 69,32 55,60 63,50 12,32 17,30 13,15 59,00 15,70 7,08 6,18 0,90 5,30 15,37 G ± 0,25 H ± 0,25 W ± 0,15 J ± 0,13 L ± 0,10 M ± 0,13 N ± 0,38 Shell Size (inch) ±.015 ±.005 ±.005 ±.005 ±.015 ±.010 G ±.010 H ±.010 W ±.006 J ±.005 L ±.004 M ±.005 Plug Receptacle N ±

52 Subminiature Space onnectors *M/*M High ensity 104 ontacts Panel utouts Standard utout Rear Mounting utout (Optional) Standard Shell Shell Size mm (inch) Mounting Method G ± 0,05 (.002) H ± 0,05 (.002) J ± 0,05 (.002) ront 59,60 (2.346) 29,80 (1.173) 63,50 (2.500) 31,75 (1.250) 19,10 (.752) 9,55 (.376) 3,04 (.120) 1,52 (.060) 2,10 (.083) Rear 58,10 (2.287) 29,05 (1.144) 63,50 (2.500) 31,75 (1.250) 14,56 (.573) 7,28 (.287) 3,04 (.120) 1,52 (.060) 3,35 (.132) ual loat Mount Shell Shell Size mm (inch) Mounting Method G ± 0,05 (.002) H ± 0,05 (.002) J ± 0,05 (.002) ront 60,40 (2.378) 30,20 (1.189) 63,50 (2.500) 31,75 (1.250) 19,90 (.783) 9,95 (.392) 2,23 (.088) 1,11 (.044) 2,10 (.083) Rear 58,90 (2.319) 29,45 (1.159) 63,50 (2.500) 31,75 (1.250) 15,16 (.597) 7,58 (.298) 2,23 (.088) 1,11 (.044) 3,35 (.132) Mounting onditions Shell Size min max 6,12 (.241) 6,88 (.271) ixing Options Through Hole (yelet) ual loat Mount (Y) 57

53 Subminiature Space onnectors *M/*M High ensity 104 ontacts Product eatures onnectors normally supplied without contacts (suffix 0 in the description, not marked on the connector) When supplied with contacts (no suffix 0), the connectors are equiped with contacts size 22/22 Insertion/extraction tool supplied with each connector, only for quality level S/S Specific imensions V max 0,60 (.024) W1 min (ull pin diameter) 4,33 (.170) W1 max (ull pin diameter) 5,45 (.215) W2 min (Square ended pin) 3,63 (.143) Z1 0,75 (.0295) / 0,77 (.0305) Z2 Z2 : to accomodate a 0,75 (.0295) / 0,77 (.0305) diameter pin *M connectors with contacts size 22/22 Male connector emale connector Weights Max Weight, without contacts : 25 grams ross References Type escription S/S escription R023 escription R022 Without contacts M*104PNM MM*104PNM-174-R023-0 M*104PNM-174-R M*104SNM MM*104SNM-174-R023-0 M*104SNM-174-R M*104PNM-R172-0 MM*104PNM-R172-R023-0 M*104SPM-R172-R M*104SNM-R172-0 MM*104SNM-R172-R023-0 M*104SSM-R172-R022-0 With contacts M*104PNM-174 MM*104PNM-174-R023 M*104PNM-174-R M*104SNM-174 MM*104SNM-174-R023 M*104SNM-174-R M*104PNM-R172 MM*104PNM-R172-R023 M*104SPM-R172-R M*104SNM-R172 MM*104SNM-R172-R023 M*104SSM-R172-R022 * : remove when the standard through hole option is required replace by the letter "Y" when the dual float mount option is required 58

54 Subminiature Space onnectors *M High ensity 104 ontacts Product eatures onnectors with solder type termination contacts size 22 inserted into two-piece insulators. Termination type available : Straight P solder terminations Specific imensions V max 0,60 (.024) W1 min (ull pin diameter) 4,33 (.170) W1 max (ull pin diameter) 5,45 (.215) W2 min (Square ended pin) 3,63 (.143) Z1 0,75 (.0295) / 0,77 (.0305) Z2 To accommodate a 0,76 (.030) diameter pin *M H connectors, straight P terminations Male connector emale connector Weights Without contacts : 25 grams With male contacts : 43 grams With female contacts : 46 grams P Hole Pattern ace view, pin insert for plug (use a mirror image for receptacle) Size 104 contacts imension X : 2,08 (.082) Recommended P hole for signal contacts 0,90 (.035) min for terminations 0,51 (.020) (M2) Termination 1,00 (.040) min for terminations 0,57 (.022) (OL3) Termination 59

55 Subminiature Space onnectors *M High ensity 104 ontacts Straight P solder Terminations Specific imensions Termination type OL3 Termination Modifier ± 0,07 (.003) OL3 0,57 (.022) 4,70 (.185) ± 0,1 (.004) M2 0,51 (.020) 4,00 (.157) ± 0,5 (.020) Termination type M2 G ontacts Shell Size max H max L max Typical Pitch between contacts Male 16,21 (.638) 11,41 (.449) 9,53 (.375) 2,08 (.082) 2,41 (.095) emale 16,17 (.637) 11,37 (.448) 9,53 (.375) 2,08 (.082) 2,41 (.095) Termination Modifier : OL3, M2 or other termination modifier, consult factory Type escription S/S escription R023 escription R022 Straight P M*104PNMOL3-174 MM*104PNMOL3-174-R023 M*104PNMOL3-174-R M*104SNMOL3-174 MM*104SNMOL3-174-R023 M*104SNMOL3-174-R M*104PNMOL3-R172 MM*104PNMOL3-R172-R023 M*104PNMOL3-R172-R M*104SNMOL3-R172 MM*104SNMOL3-R172-R023 M*104SNMOL3-R172-R M*104PNMM2-174 MM*104PNMM2-174-R023 M*104PNMM2-174-R M*104SNMM2-174 MM*104SNMM2-174-R023 M*104SNMM2-174-R M*104PNMM2-R172 MM*104PNMM2-R172-R023 M*104PNMM2-R172-R M*104SNMM2-R172 MM*104SNMM2-R172-R023 M*104SNMM2-R172-R022 * : remove when the standard through hole option is required replace by the letter "Y" when the dual float mount option is required 60

56 Subminiature Space onnectors *M OR *M/*M onnector Savers Product eatures onnectors used as connector savers in test equipment applications where more than normal mating and unmating would soon degrade a permanently mounted connector It features the rear release contact retention assembly, making it field repairable Normally supplied with the contacts installed, it can be supplied without contacts (suffix 0 in the description, not marked on the connector) Male/emale type contacts, size 20 for standard density, size 22 for high density Packaging unit : 1 piece (plastic bag) Specific imensions Shell Size Weights ± 0,25 (.010) J1 ± * / ** J2 L ± 0,38 (.015) 24,99 (.984) 21,87 (.861) 5,94 (.234) * 6,18 (.243) 10,59 (.417) 33,32 (1.312) 21,87 (.861) 5,94 (.234) * 6,18 (.243) 10,59 (.417) 47,04 (1.852) 21,97 (.865) 5,84 (.230) ** 6,18 (.243) 10,59 (.417) 63,50 (2.500) 21,97 (.865) 5,84 (.230) ** 6,18 (.243) 10,59 (.417) 61,11 (2.406) 21,97 (.865) 5,84 (.230) ** 6,18 (.243) 10,59 (.417) 63,50 (2.500) 21,97 (.865) 5,84 (.230) ) ** 6,18 (.243) 10,59 (.417) Shell Size * ± 0,12 (.005) ** ± 0,15 (.006) Standard ensity without contacts Standard ensity with contacts High ensity without contacts Max Weight (grams) per contact Max Weight (grams) per connector saver ,50 47,14 High ensity with contacts 61

57 Subminiature Space onnectors *M OR *M/*M onnector Savers ontact Size 20 mm G H K M N P Q Min 19,76 5,50 9,55 0,74 2,08 0,99 1,65 7,60 1,10 1,80 1,07-1,73 Max 20,12 5,80 9,63 0,81 2,12 1,04 1,73 7,85 1,20 1,85 1,14 0,30 1,78 (inch) G H K M N P Q Min Max ontact Size 22 Mm G H M N P J L Min 19,50 5,95 7,28 0,75 1,17 5,55 1,52 0,78-0,91 0,20 Max 19,95 6,05 7,34 0,77 1,21 5,85 1,57 0,20 1,01 0,25 (Inch) G H M N P J L Min Max Residual magnetism level NM (200 Gamma max) or other residual magnetism level, consult factory Packaging unit : 250 pieces (plastic bag) 62

58 Subminiature Space onnectors *M OR *M/*M onnector Savers How to order S/S Quality Level M 25 PS NM *Materials and inishes: ontact information Termination modifier 0: without contacts (marked on the documentation / not marked on the connector) Nothing: with contacts (size 20 for Standard ensity / size 22 for High ensity) Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement ( Number of contacts for variant 01: : 9 : 15 : 25 : Number of contacts for variant 02: : 15 : 26 : 44 : : 104 only R172* - 174* Insert type: M for two-piece insert with metal retention clips for saver contacts Saver type Shell size Series Testing level Variant 01: Standard density 02: High density etail specification number Shell material: luminium alloy Shell finish 174: 25,4 m (1000 in) min electroless Nickel (Modification code 174) Shell finish R172: 0.70 m (28 m) min Gold over 25.4 m (1000 m) electroless Nickel (Modification code R172) 63

59 Subminiature Space onnectors *M OR *M/*M onnector Savers How to order R023 Quality Level M M 25 PS NM 174 R023 0 ontact information 0: without contacts (marked on the documentation / not marked on the connector) Nothing: with contacts (size 20 for Standard ensity / size 22 for High ensity) Suffix for MIL lass M Quality Level (onnector Specification R023) Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement ( Number of contacts Standard ensity versions (contacts size 20): : 9 : 15 : 25 : Number of contacts for High ensity versions (contacts size 22): : 15 : 26 : 44 : : 104 only R172* - 174* ccording to MIL-TL Specification Insert type: Saver type Shell size Series M for two-piece insert with metal retention clips for saver contacts *Materials and inishes: Shell material: luminium alloy Shell finish 174: 25,4 m (1000 in) min electroless Nickel (Modification code 174) Shell finish R172: 0.70 m (28 m) min Gold over 25.4 m (1000 m) electroless Nickel (Modification code R172) 64

60 Subminiature Space onnectors *M OR *M/*M onnector Savers How to order R022 Quality Level M M 25 PS NM 174 R022 0 ontact information 0: without contacts (marked on the documentation / not marked on the connector) Nothing: with contacts (size 20 for Standard ensity / size 22 for High ensity) Suffix for ommercial Space Grade Quality Level (onnector Specification R022) Magnetism level NM : 200 Gamma NM : 20 Gamma (on special request) Type of contact P : Pin (Male) S : Socket (emale) ontact arrangement ( Number of contacts Standard ensity versions (contacts size 20): : 9 : 15 : 25 : Number of contacts for High ensity versions (contacts size 22): : 15 : 26 : 44 : : 104 only R172* - 174* ccording to MIL-TL Specification Insert type: Saver type Shell size Series M for two-piece insert with metal retention clips for saver contacts *Materials and inishes: Shell material: luminium alloy Shell finish 174: 25,4 m (1000 in) min electroless Nickel (Modification code 174) Shell finish R172: 0.70 m (28 m) min Gold over 25.4 m (1000 m) electroless Nickel (Modification code R172) 65

61 Subminiature Space onnectors *M OR *M/*M onnector Savers ross References Type escription S/S escription R023 escription R022 Without contacts M9PSNM0 MM9PSNM-R023-0 M9PSNM-R M15PSNM0 MM15PSNM-R023-0 M15PSNM-R M25PSNM0 MM25PSNM-R023-0 M25PSNM-R M37PSNM0 MM37PSNM-R023-0 M37PSNM-R M50PSNM0 MM50PSNM-R023-0 M50PSNM-R M15PSNM0 MM15PSNM-R023-0 M15PSNM-R M26PSNM0 MM26PSNM-R023-0 M26PSNM-R M44PSNM0 MM44PSNM-R023-0 M44PSNM-R M62PSNM0 MM62PSNM-R023-0 M62PSNM-R M78PSNM0 MM78PSNM-R023-0 M78PSNM-R M104PSNM MM104PSNM-174-R023-0 M104PSNM-174-R M104PSNM-R172-0 MM104PSNM-R172-R023-0 M104PSNM-R172-R022-0 With contacts M9PSNM MM9PSNM-R023 M9PSNM-R M15PSNM MM15PSNM-R023 M15PSNM-R M25PSNM MM25PSNM-R023 M25PSNM-R M37PSNM MM37PSNM-R023 M37PSNM-R M50PSNM MM50PSNM-R023 M50PSNM-R022 R M15PSNM MM15PSNM-R023 M15PSNM-R M26PSNM MM26PSNM-R023 M26PSNM-R M44PSNM MM44PSNM-R023 M44PSNM-R M62PSNM MM62PSNM-R023 M62PSNM-R M78PSNM MM78PSNM-R023 M78PSNM-R M104PSNM-174 MM104PSNM-174-R023 M104PSNM M104PSNM-R172 MM104PSNM-R172-R023 M104PSNM-R172-R022 ontacts Size S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number H R R H R R

62 Subminiature Space onnectors oaxial / Power *M ontacts Product eatures Loose size 8 contacts for combination arrangement *M connectors must be ordered separately. oaxial contacts, straight or 90, solder or crimp type - Plug (male), with female center contact, for installation on *M plug connectors (and on the central cavity of receptacle connectors 3WK3) - Receptacle (female), with male center contact, for installation on *M receptacle connectors (and on the central cavity of plug connectors 3WK3) Power contacts, straight, solder or crimp type (Mating pin size 8) - Plug (male), for installation on *M plug connectors (and on the central cavity of receptacle connectors 3WK3 - Receptacle (female), for installation on *M receptacle connectors (and on the central cavity of plug connectors 3WK3) Packaging unit - 1 piece (plastic bag) for S/S quality level - 25 pieces (plastic bag) for R023 quality level - 25 pieces (plastic bag) for R022 quality level Specific Performance Specifications ll ontacts ontact Retention in Insert ontact Insertion orce (from the rear) Retainer orce (from the front) Residual magnetism level 65 N max / contact axial displacement 0,50 (.020) max 55 N min (locking) / 65 N max (no damage) 50 N min (no unlocking) NM (200 Gamma max) oaxial ontacts requency Range Up to 1 GHz VSWR (up to 1 GHz) 1.4 R Insertion Loss at 1 GHz 0.2 d Soldering Temperature 260 / 10 seconds max ontact ngagement orce Outer contact (Receptacle) : 0.83 N min, pin dia 3,86 (.152) / 6.87 N max, pin dia 3,86 (.152) enter contact (Plug) : 0.28 N min, pin dia 0,99 (.039) / 3.33 N max, pin dia 1,04 (.041) ontact Separation orce Outer contact (Receptacle) : 0.83 N min, pin dia 3,86 (.152) / 6.87 N max, pin dia 3,86 (.152) enter contact (Plug) : 0.28 N min, pin dia 0,99 (.039) / 2.22 N max, pin dia 1,04 (.041) ontact Resistance (center contact) 8.5 m max (low level current) / 7.0 m max (rated level current) Voltage Proof (center / outer contacts) 1000 Vrms (straight rear end) / 800 Vrms (90 rear end) Power ontacts Rated urrent 40 at T amb 60 max / Limitation by the current carrying capability of the cable Soldering Temperature 260 / 10 seconds max ontact ngagement orce (Receptacle) : 0.83 N min, pin dia 3,58 (.141) / 6.87 N max, pin dia 3,63 (.143) ontact Separation orce (Receptacle) : 0.83 N min, pin dia 3,58 (.141) / 5.56 N max, pin dia 3,63 (.143) ontact Resistance 2.5 m max (low level current) / 2.0 m max (rated level current) 67

63 Subminiature Space onnectors oaxial / Power *M ontacts Insertion/xtraction Instructions Insertion Tool Insertion Instructions No insertion tool is required. The contact is easily snapped in from the rear of the connector manually. xtraction Tool Operating Instructions xtraction tool T-6-2 (Part number ) To extract the contact, hold the tool by the body and insert the tip into the the front of the contact cavity until it bottoms and closes the contact retaining ring. Holding the body in this position securely enough to keep contact retaining ring closed, push the plunger. ontact will be pushed out of the rear of the assembly. Maximum Recess of ontacts relative to Shell ront Male contact emale contact 68

64 Subminiature Space onnectors oaxial / Power *M ontacts oaxial ontacts Straight Solder/or rimp raid Type Solder Type S Variants 01/05/09 S Variants 02/06/10 rimp Type S/S 3401 Variant Type max ± 0,60 (.024) S Variants 11/15/19 S Variants 12/16/20 ccepted ables 01 (solder) / 11 (crimp) Male 18,80 (.740) 23,62 (.930) 1,02 (.040) 178 /U /U - KX (solder) / 12 (crimp) emale 18,80 (.740) 23,90 (.941) 1,02 (.040) 178 /U /U - KX (solder) / 15 (crimp) Male 18,80 (.740) 23,62 (.930) 1,70 (.067) 179 /U U /U - KX IS 06 (solder) / 16 (crimp) emale 18,80 (.740) 23,90 (.941) 1,70 (.067) 179 /U U /U - KX IS 09 (solder) / 19 (crimp) Male 21,50 (.846) 26,34 (1.037) 2,79 (.110) 180 /U (solder) / 20 (crimp) emale 21,50 (.846) 26,83 (1.056) 2,79 (.110) 180 /U 1.7 Max Weight (grams) Solder/or rimp raid Type Solder Type S Variants 03/07 S Variants 04/08 rimp Type SVariants 13/17 SVariants14/18 S/S 3401 Variant Type max ± 0,45 (.018) Typical ccepted ables 03 (solder) / 13 (crimp) Male 13,60 (.535) 18,67 (.735) 12,50 (.492) 1,02 (.040) 178 /U /U - KX (solder) / 14 (crimp) emale 13,60 (.535) 18,98 (.747) 12,50 (.492) 1,02 (.040) 178 /U /U - KX (solder) / 17 (crimp) Male 13,60 (.535) 18,67 (.735) 12,50 (.492) 1,70 (.067) 179 /U U /U - KX IS 08 (solder) / 18 (crimp) emale 13,60 (.535) 18,98 (.747) 12,50 (.492) 1,70 (.067) 179 /U U /U - KX IS Max Weight (grams)

65 Subminiature Space onnectors oaxial / Power *M ontacts oaxial ontacts ssembly Instructions Recommended oaxial able Trim imensions rimp tool with integral die set for all contacts Hand tool HX4 (M22520/5-01) T-M (Part number ) ie set Y322 able Type Reference Specification RG 178 /U MIL--17 RG 196 /U MIL--17 RG 179 /U MIL--17 RG 316 U MIL--17 RG 188 /U MIL--17 RG 180 /U MIL--17 KX 21 N KX 22 N IS S/S 3902/001 imensions (mm) / Tolerances ± 0,25 N (Straight) O (Straight) P (Straight) N (90 ) O (90 ) P (90 ) Tool losure 178 /U 196 /U KX 21 7,92 6,35 1,98 9,52 5,94 1,57 T-M 179 /U 316 U 188 /U KX IS 7,92 6,35 1,98 9,52 5,94 1,57 T-M 180 /U 9,52 7,92 1,98 10,69 7,92 2,39 T-M imensions (inch) / Tolerances ±.010 N (Straight) O (Straight) P (Straight) N (90 ) O (90 ) P (90 ) Tool losure 178 /U 196 /U KX T-M 179 /U 316 U 188 /U KX IS T-M 180 /U T-M Straight raid Type 90 raid Type Step 1 Slide the outer ring over the cable jacket. Trim the cable as specified in the table. Insert the cable dielectric and center conductor into the inside diameter of the inner sleeve. Then solder the center conductor to the coax center contact. 70 Step 2 Slide the outer ring forward until it is flush with the coax shell containing the braid between the outer ring and the inner sleeve. or solder type coaxes, soft solder the outer ring to the assembly thru the cross drilled solder hold. or crimp type coaxes, crimp with the appropriate tool in the area defined.

66 Subminiature Space onnectors oaxial / Power *M ontacts Power ontacts Solder raid Type SVariant 01 S Variant 02 S/S 3401 Variant Type max max S Variants 03/05 S Variants 04/06 max 01 (solder) Male 16,92 (.666) 22,10 (.870) 8,13 (.320) 4,90 (.193) 5,66 (.223) (solder) emale 16,92 (.666) 21,80 (.858) 8,13 (.320) 4,90 (.193) 5,66 (.223) (solder) Male 16,92 (.666) 22,10 (.870) 8,13 (.320) 3,00 (.118) 3,76 (.148) (solder) emale 16,92 (.666) 21,80 (.858) 8,13 (.320) 3,00 (.118) 3,76 (.148) (solder) Male 16,92 (.666) 22,10 (.870) 8,13 (.320) 1,90 (.075) 2,67 (.105) (solder) emale 16,92 (.666) 21,80 (.858) 8,13 (.320) 1,90 (.075) 2,67 (.105) max max WG Max Weight (grams) rimp raid Type S Variant 07 S Variant 08 S/S 3401 Variant Type max max S Variants 09/11 S Variants 10/12 max 07 (crimp) Male 19,00 (.748) 24,70 (.972) 11,10 (.437) 4,20 (.165) 5,80 (.228) (crimp) emale 19,00 (.748) 24,60 (.969) 11,10 (.437) 4,20 (.165) 5,80 (.228) (crimp) Male 19,00 (.748) 21,60 (.850) 8,40 (.331) 3,25 (.128) 4,70 (.185) (crimp) emale 19,00 (.748) 21,50 (.846) 8,40 (.331) 3,25 (.128) 4,70 (.185) (crimp) Male 19,00 (.748) 19,30 (.760) 6,35 (.249) 2,50 (.098) 3,80 (.150) (crimp) emale 19,00 (.748) 19,20 (.756) 6,35 (.249) 2,50 (.098) 3,80 (.150) min max WG Max Weight (grams) 71

67 Subminiature Space onnectors oaxial / Power *M ontacts Power ontacts ssembly Instructions Recommended Wire Trim Length Hand rimp Tool rimp tool : M300-T Locator UH2-5 (Universal positioner M22520/1-05) (Set the depth from the front side, with the rear screw, according to the table below) S/S 3401 Variant Type Wire Size Selector Position Note * Locator epth ± 0,02 (.001) Tensile Strength min 07 (crimp) Male WG ,5 (.886) 50 dan 08 (crimp) emale WG ,0 (.945) 50 dan 09 (crimp) Male WG ,0 (.827) 50 dan 10 (crimp) emale WG ,5 (.886) 50 dan 11 (crimp) Male WG ,0 (.748) 30 dan 12 (crimp) emale WG ,0 (.827) 30 dan Note * : or information. rimp tensile strength test shall govern. 72

68 Subminiature Space onnectors oaxial / Power *M ontacts ross References / oaxial ontacts S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M ross References / Power ontacts S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M M R M

69 Subminiature Space onnectors ccessories / Screwlocks Product eatures ront Panel Mount Rear Panel Mount Male or female screwlocks Residual magnetism level - rass parts : NM (200 Gamma max) - Stainless Steel parts : NM (200 Gamma max) 1 part number for 1 piece (or kit) Order 2 pieces (or kits) per connector Packaging unit - 2 pieces (plastic bag) for S/S quality level - 50 pieces (plastic bag) for R023 quality level - 50 pieces (plastic bag) for R022 quality level Maximum torque value for screws cm.dan for female (brass) cm.dan for female (stainless steel) cm.dan for female-saver/feedthrough (brass) cm.dan for female-saver/feedthrough (stainless steel) cm.dan for male (brass) cm.dan for male (stainless steel) emale Screwlock Kit consists of : - 1 screwlock - 2 washers - 1 lock washer - 1 nut Two washers are used when front mounting. Remove one washer for each 0,76 (.030) of panel thickness when rear mounting. 1,52 (.060) max panel. Max weight (grams) : 2.0 (1 piece) S/S 3401 Variant pplication H ± 0,38 (.015) J ± 0,15 (.006) K ± 0,25 (.010) L min M ± 0,10 (.004) N ± 0,10 (.004) 01 / 48 Standard 4,75 (.187) 7,92 (.312) 4,85 (.191) 3,18 (.125) 0,76 (.030) 1,90 (.075) 06 / 53 Savers 4,75 (.187) 14,50 (.571) 4,85 (.191) 3,18 (.125) 0,76 (.030) 1,90 (.075) 58 / 59 eedthrough 4,75 (.187) 15,87 (.625) 4,85 (.191) 3,18 (.125) 0,76 (.030) 1,90 (.075) emale Screwlock ross References pplication Material S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number Standard rass NM Standard Stainless Steel NM Savers rass NM Savers Stainless Steel NM eedthrough rass NM eedthrough Stainless Steel NM R R R R R R

70 Subminiature Space onnectors ccessories / Screwlocks Male Screwlock Kit consists of : - 1 screw - 1 clip Max weight (grams) for sizes,,, (1 piece) for size (1 piece) imension S : 2,80 (.110) min imension : 2,01 (.080) ± 0,03 (.001) S/S Variant pplication ackshell H max L ± 0,25 (.010) N ± 0,38 (.015) Q ± 0,38 (.015) R ± 0,10 (.004) 02 / 49 / 65 / 73, Pin /,,, Skt Without 6,09 (.024) 6,35 (.250) 14,10 (.555) 3,60 (.142) 0,85 (.033) 03 / 50 / 66 / 74, Pin Without 6,09 (.024) 6,35 (.250) 14,10 (.555) 3,60 (.142) 1,05 (.041) 04 / 51 / 67 / 75 Skt Without 6,34 (.250) 7,14 (.281) 16,66 (.656) 4,40 (.173) 0,85 (.033) 05 / 52 / 68 / 76 Pin Without 6,34 (.250) 7,14 (.281) 16,66 (.656) 4,40 (.173) 1,05 (.041) 44 / 54 / 69 / 77, Pin /,,, Skt With 6,34 (.250) 7,14 (.281) 14,10 (.555) 4,40 (.173) 1,85 (.073) 45 / 55 / 70 / 78, Pin With 6,34 (.250) 7,14 (.281) 14,10 (.555) 4,40 (.173) 2,10 (.083) 46 / 56 / 71 / 79, Skt With 6,34 (.250) 7,14 (.281) 16,66 (.656) 4,40 (.173) 1,85 (.073) 47 / 57 / 72 / 80, Pin With 6,34 (.250) 7,14 (.281) 16,66 (.656) 4,40 (.173) 2,10 (.083) Male Screwlock ross References Slotted head - Without ackshell / Slotted Head Screw - pplication Material S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number, Pin /,,, Skt rass NM, Pin rass NM, Skt rass NM, Pin rass NM , Pin /,,, Skt Stainless Steel NM R023, Pin Stainless Steel NM R023, Skt Stainless Steel NM R023, Pin Stainless Steel R

71 Subminiature Space onnectors ccessories / Screwlocks - With ackshell / Slotted Head Screw - pplication Material S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number, Pin /,,, rass Nmb Skt, Pin rass NM Skt rass NM Pin rass NM , Pin /,,, Stainless Steel NM Skt R023, Pin Stainless Steel NM R023 Skt Stainless Steel NM R023 Pin Stainless Steel NM R Hexagonal hole head - Without ackshell / Hexagonal Hole Head Screw - pplication Material S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number, Pin /,,, rass NM Skt, Pin rass NM Skt rass NM Pin rass NM , Pin /,,, Skt Stainless Steel NM R023, Pin Stainless Steel NM R023 Skt Stainless Steel NM R023 Pin Stainless Steel NM R With ackshell / Hexagonal Hole Head Screw - pplication Material S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number, Pin /,,, rass NM Skt, Pin rass NM Skt rass NM Pin rass NM , Pin /,,, Stainless Steel NM Skt R023, Pin Stainless Steel NM R023 Skt Stainless Steel NM R023 Pin Stainless Steel NM R023 76

72 Subminiature Space onnectors ccessories / ackshells Potting Shell (rear open) Max weight (grams) : N.. (not on board) Packaging unit : 1 piece (plastic bag) Residual magnetism level NM (200 Gamma max) Shell Size S/S Variant ± 0,38 (.015) ± 0,38 (.015) ± 0,50 (.020) ± 0,50 (.020) G ± 0,38 (.015) 17 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 7,60 (.300) 14,92 (.587) 0,38 (.015) 12,30 (.484) 18 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 7,60 (.300) 28,54 (1.124) 0,38 (.015) 12,30 (.484) 19 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 7,60 (.300) 44,47 (1.751) 0,38 (.015) 12,30 (.484) 20 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 9,90 (.390) 44,47 (1.751) 0,38 (.015) 12,30 (.484) Switching Shell (rear closed) Max weight (grams) Size : 5.0 Size : 6.0 Size : 8.0 Size : 8.0 Packaging unit : 1 piece (plastic bag) Residual magnetism level NM (200 Gamma max) Shell Size S/S Variant ± 0,38 (.015) ± 0,38 (.015) G ± 0,38 (.015) 21 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 0,38 (.015) 12,30 (.484) 22 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 0,38 (.015) 12,30 (.484) 23 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 0,38 (.015) 12,30 (.484) 24 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 0,38 (.015) 12,30 (.484) ross References Type Size S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number Potting shell NM R NM R NM R NM R Switching shell NM R NM R NM R NM R

73 Subminiature Space onnectors ccessories / ackshells Straight lamp Max weight (grams) : Size : 6.0 Size : 7.0 Size : 10.0 Size : 10.0 Number of screws : 2 (, ) / 3 (, ) Packaging unit : 1 piece (plastic bag) Residual magnetism level NM (200 Gamma max) Shell Size S/S Variant ± 0,38 (.015) ± 0,38 (.015) ± 0,38 (.015) ± 0,38 (.015) G ± 0,38 (.015) H ± 0,38 (.015) 25 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 7,51 (.296) 7,93 (.312) 0,38 (.015) 16,36 (.644) 12,30 (.484) 26 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 7,51 (.296) 20,22 (.796) 0,38 (.015) 16,36 (.644) 12,30 (.484) 27 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 7,51 (.296) 17,45 (.687) 0,38 (.015) 16,36 (.644) 12,30 (.484) 28 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 9,91 (.390) 17,45 (.687) 0,38 (.015) 17,63 (.694) 12,30 (.484) Round lamp Max weight (grams) : Size : 9.0 Size : 11.0 Size : 12.0 Size : 15.0 Size : 16.0 Packaging unit : 1 piece (plastic bag) Residual magnetism level NM (200 Gamma max) Shell Size S/S Variant ± 0,38 (.015) ± 0,38 (.015) max ± 0,38 (.015) ± 0,38 (.015) G ± 0,76 (.030) H 29 30,68 (1.208) 12,70 (.500) 24,99 (.984) 10,31 (.406) 16,79 (.661) 3,18 (.125) 26,18 (1.031) 0,38 (.015) 30 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 10,31 (.406) 24,99 (.984) 3,18 (.125) 26,18 (1.031) 0,38 (.015) 31 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 15,06 (.593) 38,48 (1.515) 4,75 (.187) 26,98 (1.062) 0,38 (.015) 32 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 18,23 (.718) 55,14 (2.171) 6,35 (.250) 26,98 (1.062) 0,38 (.015) 33 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 20,62 (.812) 53,16 (2.093) 7,92 (.312) 26,98 (1.062) 0,38 (.015) ross References Type Size S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number Straight clamp NM R NM R NM R NM R Round clamp NM R NM R NM R NM R NM R

74 Subminiature Space onnectors ccessories / ackshells eep Straight lamp Max weight (grams) : Size : 10.0 Size : 12.0 Size : 17.0 Size : 24.0 Size : 27.0 Packaging unit : 1 piece (plastic bag) Residual magnetism level NM (200 Gamma max) Shell Size S/S Variant ± 0,38 (.015) ± 0,38 (.015) ± 0,38 (.015) ± 0,38 (.015) G ± 0,38 (.015) 34 30,56 (1.203) 12,48 (.492) 24,99 (.984) 9,53 (.375) 9,53 (.375) 19,05 (.750) 31,75 (1.250) 14,68 (.578) 35 38,89 (1.531) 12,48 (.492) 33,33 (1.312) 7,93 (.312) 18,11 (.713) 19,05 (.750) 31,75 (1.250) 14,68 (.578) 36 52,78 (2.078) 12,48 (.492) 47,04 (1.852) 7,93 (.312) 25,40 (1.000) 25,40 (1.000) 39,70 (1.563) 14,68 (.578) 37 69,04 (2.718) 12,48 (.492) 63,50 (2.500) 7,93 (.312) 34,93 (1.375) 25,40 (1.000) 39,70 (1.563) 14,68 (.578) 38 66,68 (2.625) 15,25 (.601) 61,11 (2.406) 10,31 (.406) 35,71 (1.406) 28,57 (1.125) 42,88 (1.688) 17,45 (.687) H max L max 90 ntry Max weight (grams) : Size : 12.0 Size : 14.0 Size : 17.5 Size : 24.0 Size : 27.0 Packaging unit : 1 piece (plastic bag) Residual magnetism level NM (200 Gamma max) Shell Size S/S Variant ± 0,38 (.015) ± 0,76 (.030) ± 0,25 (.010) ± 0,76 (.030) ± 0,76 (.030) G ± 0,76 (.030) H ± 0,76 (.030) 39 30,56 (1.203) 18,24 (.718) 24,99 (.984) 2,77 (.109) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281) 40 38,89 (1.531) 18,24 (.718) 33,33 (1.312) 2,77 (.109) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281) 41 52,78 (2.078) 24,58 (.968) 47,04 (1.852) 2,77 (.109) 11,10 (.437) 15,88 (.625) 11,89 (.468) 7,14 (.281) 42 69,04 (2.718) 30,15 (1.187) 63,50 (2.500) 2,77 (.109) 11,10 (.437) 20,63 (.812) 11,89 (.468) 7,14 (.281) 43 66,68 (2.625) 31,75 (1.250) 61,11 (2.406) 2,77 (.109) 14,28 (.562) 23,01 (.906) 13,49 (.531) 8,71 (.343) ross References Type Size S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number eep, straight clamp NM R NM R NM R NM R NM R entry NM R NM R NM R NM R NM R

75 Subminiature Space onnectors ccessories / ust aps Product eatures Two types of dust caps are available Supplied with *M or *M connectors, for quality level S/S - Standard type (red color) supplied when no specific indication is mentionned (to be ordered separately for quality levels R023 and R022) - ntistatic type (black color) supplied on request (to be specified in the order) Packaging unit : 50 pieces (plastic bag) Max weight (grams) : N.. (not on board) (Red color) (lack color) Standard type ntistatic type Shell Size Type ± 0,25 (.010) ± 0,25 (.010) ± 0,25 (.010) ± 0,25 (.010) Skt 17,63 (.694) 15,93 (.627) 9,19 (.362) 7,49 (.295) 16,36 (.644) 7,59 (.299) Pin 19,02 (.749) 17,32 (.682) 10,46 (.412) 8,76 (.345) 17,78 (.700) 8,92 (.351) Skt 25,96 (1.022) 24,26 (.955) 9,19 (.362) 7,49 (.295) 24,59 (.968) 7,62 (.300) Pin 27,36 (1.077) 25,65 (1.010) 10,46 (.412) 8,76 (.345) 26,52 (1.044) 9,02 (.355) Skt 39,67 (1.562) 37,97 (1.495) 9,19 (.362) 7,49 (.295) 38,25 (1.506) 7,49 (.295) Pin 41,53 (1.635) 39,83 (1.568) 10,92 (.430) 9,22 (.363) 39,60 (1.559) 9,09 (.358) Skt 56,13 (2.210) 54,43 (2.143) 9,19 (.362) 7,49 (.295) 54,81 (2.158) 7,37 (.290) Pin 57,99 (2.283) 56,29 (2.216) 10,92 (.430) 9,22 (.363) 56,90 (2.240) 9,37 (.369) Skt 53,75 (2.116) 52,04 (2.049) 12,04 (.474) 10,34 (.407) 53,11 (2.091) 10,41 (.410) Pin 55,35 (2.179) 53,64 (2.112) 13,61 (.536) 11,91 (.469) 54,28 (2.137) 12,04 (.474) ross References Version Size Type S/S Quality Level R023 Quality Level R022 Quality Level escription Part Number escription Part Number escription Part Number Standard Skt R R Pin R R Skt R R Pin R R Skt R R Pin R R Skt R R Pin R R Skt R R Pin R R ntistatic Skt Pin Skt Pin Skt Pin Skt Pin Skt Pin : precise the mention "antistatic" after the S/S description max max 80