Mini-Universal MATE-N-LOK 2 Connectors
|
|
- Hillary Walton
- 5 years ago
- Views:
Transcription
1 MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide proper plug-to-cap mating Lanceless contacts for tangle-free handling Toolless contact removal Tin or duplex gold plated contacts vailable in 2 through 24 circuit sizes wire-to-wire and wire-to-board Mates with standard Mini- Universal MTE-N-LOK headers and connectors Contacts available in strip and loose piece Polarized housings available in UL 94V-0 or UL 94V-2 flammability rated material Mini-Universal MTE-N-LOK 2 pins and sockets can be intermixed in Mini-Universal MTE-N-LOK 2 housings Mini-Universal MTE-N-LOK 2 pins and sockets can not be used in standard Mini- Universal MTE-N-LOK housings Contacts accept wire size range WG [ mm2] centerline spacing Not for interrupting current Recognized under the Component Program of Underwriters Laboratories Inc. to US and Canadian Standards, File No. E28476 Performance Characteristics The Mini-Universal MTE-N-LOK 2 Connector performance characteristics found on are based on free-hanging connectors, loaded with contacts crimped on stranded wire. Low Level Termination Resistance 20 milliohms max. total resistance between wire crimps of a mated pin and socket Dielectric Withstanding Voltage 1500 V C or DC between adjacent circuits at sea level Insulation Resistance 100 megohms minimum between adjacent circuits Voltage Rating 600 V C or DC Contact Retention 15 lb. min. per contact Durability 25 cycles, mating and unmating Current Rating up to 10.5 amps per circuit; 2 position Mating Force 2.5 lb. max. per circuit Unmating Force 0.25 lb. minimum per circuit Termination Contact Resistance Crimp Wire Size Tensile Force WG mm 2 Test Resistance Current Milliohms Force (Min.) (mps) ( Init.) lbs. N Technical Documents Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK 2 pplication Specification Mini-Universal MTE-N-LOK 2 Instruction Sheet Mini-Universal MTE-N-LOK 2 Mini-Universal MTE-N-LOK 2 connectors also will withstand the following tests: Housing Lock Strength 6 lb. min. Thermal Shock -55 C to +105 C Temperature-Humidity Cycling 25 C to 65 C at 95 RH Vibration cycles per minute at.06 inch total excursion Physical Shock 18 drops, 50 G half-sine at 11 milliseconds Mini-Universal MTE-N-LOK 2 Centerline Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
2 MP Mini-Universal MTE-N-LOK 2 (Continued) Mini-Universal MTE-N-LOK 2 Centerline Performance Characteristics (Continued) Maximum Current Maximum current rating of Mini-Universal MTE-N-LOK 2 connectors is limited by the maximum operating temperature of the housings which is 105 C (gold) or 85 C (tin) including the temperature rise of the contacts which is a maximum of 30 C. There are several variables which have a direct effect on this maximum current-carrying capability for a given connector and must be considered for each application. These variables are: Wire Size Larger diameter wire will carry more current since it has less internal resistance to current flow and thus generates less heat. Longer wire lengths also enhance current-carrying capabilities since the wire conducts heat away from the connector. Connector Size In general, the more circuits in a connector, the less current can be carried. mbient Temperature The higher the ambient temperature, the less current can be carried in any given connector. Printed Wiring Board Conductor Size The finished trace conductor width and thickness should be maximized to allow for the greatest currentcarrying capacity and heat dissipation. Contacts Pin diameter.039 [0.99] Brass Stock Thickness.010 [0.25] These contacts can be used in either Mini-Universal MTE-N-LOK 2 or housings only Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK 2 pplication Specification Mini-Universal MTE-N-LOK 2 Housings pages Current Rating Verification for 30 C Maximum Temperature Rise 100% Energized 2 Circuit Connector (Wire-to-Wire) 10.5 mps max mps max. 30 Temperature Rise (Degrees C) WG Circuit Connector (Wire-to-Wire) 7.5 mps max. 5 mps max..775 [19.69] Pin 24 WG mbient Temperature (Degrees C) Not to be used with Mini-Universal MTE-N-LOK Current is limited above 75 C so as not to exceed 105 C (maximum operating temperature) once the t rise is added to the ambient 30 Temperature Rise (Degrees C) WG 24 WG mbient Temperature (Degrees C) Current is limited above 75 C so as not to exceed 105 C (maximum operating temperature) once the t rise is added to the ambient.775 [19.69] Socket Contact Part Numbers Wire Size HDM Hand Range Ins. Pin Socket Finish pplicator Tool WG [mm2] Range Strip Loose Strip Loose Part No. Part No. Form Piece Form Piece Pre-tin [ ] Duplex Pre-tin [ ] Duplex Pre-tin [.3 -.8] Duplex Pre-tin [.5-1.2] Duplex Duplex Finish Plated with [ ] min. gold in mating area and [.00254] min. tin in crimping area over [.00127] min. nickel underplate on entire contact. 2HDM pplicator part number ending in -1 is used on MPOMTOR CLS Machine with T or G Terminators, -2 is used on MP-O-LECTRIC Model K Machine, -3 is used on MP-O-ELECTRIC Model G Machine. 3HDM pplicator part number ending in -3 is used on MPOMTOR CLS Machine with T or G Terminators, -4 is used on MP-O-LECTRIC Model K Machine, -5 is used on MP-O-LECTRIC Model G Machine. See pages for further information. Note: ll part numbers are RoHS Compliant Current Rating (mperes) Current Rating (mperes) 100 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
3 MP Mini-Universal MTE-N-LOK 2 (Continued) Housings Free-Hanging Centerline spacing 2 and 3 Circuit, In-Line Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK 2 Contacts page 100 Mating pages [23.75].679 [17.25].844 [21.44].965 [24.51].571 [14.50].736 [18.69] Number Housing Part Numbers of UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Dimension and 6 Circuit, Dual Row [23.75].679 [17.25].965 [24.51].571 [14.50] Mini-Universal MTE-N-LOK 2 Centerline [23.75].965 [24.51] Number Housing Part Numbers of UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Dimension Keying UL94V-0 Nylon, white color.098 [2.49].065 [1.65].920 [23.37].070 [1.78].098 [2.49] Part Number Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
4 MP Mini-Universal MTE-N-LOK 2 (Continued) Housings Free-Hanging Centerline spacing 9, 12 and 15 Circuit, Matrix Mini-Universal MTE-N-LOK 2 Centerline Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK 2 Contacts page 100 Keying page 101 Mating pages [23.75] 8 through 24 Circuit, Dual Row.844 [21.44].965 [24.51].736 [18.69] Number Housing Part Numbers of UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Dimension [24.51].571 [14.50].679 [17.25] [23.75] 102 Number Housing Part Numbers of UL94V-0 Nylon, White Color UL94V-2 Nylon, Natural Color Dimension Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
5 MP Mini-Universal MTE-N-LOK 2 (Continued) Vertical PC Board Pin Centerline spacing Housing Nylon, white Flammability Rating UL94V-0 Contacts Brass Solder tail diameter.039 [1.00] Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK 2 Recommended PC Board Hole Layout page 106 Mating Mini-Universal MTE-N-LOK 2 Housings pages Mini-Universal MTE-N-LOK Housings pages and 3 Circuit, In-Line.220 [5.58].531 [13.49] 9, 12 and 15 Circuit, Matrix.550 [13.97].531 [13.49].387 [9.83] [.762] 4, 6, 8, 10 and 12 Circuit, Dual Row.531 [13.49] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row.387 [9.83] [.762] Mates with Housing Vertical Pin Header Part Numbers Part Number Number of Style Pin With Without (Using Socket Contacts) Dim. Finish Drain Holes Drain Holes Mini-Universal Mini-Universal MTE-N-LOK MTE-N-LOK 2 2 In-Line.387 Tin Duplex In-Line.550 Tin Duplex Dual Row.387 Tin Duplex Dual Row.550 Tin Duplex Dual Row.713 Tin Duplex Matrix.551 Tin Duplex Dual Row.877 Tin Duplex Dual Row Tin Duplex Tin Matrix Duplex Dual Row Tin Duplex Matrix.877 Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex [13.49] [.762] Mini-Universal MTE-N-LOK 2 Centerline 1Tin Finish Plated with [.00381] min. tin over [.00127] min. nickel underplate on entire contact. 2Duplex Finish Plated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
6 MP Mini-Universal MTE-N-LOK 2 (Continued) Mini-Universal MTE-N-LOK 2 Centerline Vertical PC Board Blindmate Pin Centerline spacing Housing Nylon, white Flammability Rating UL94V-0 Contacts Brass Solder tail diameter.039 [1.00] Mini-Universal MTE-N-LOK Mini-Universal MTE-N-LOK 2 Recommended PC Board Hole Layout page 106 Mating Mini-Universal MTE-N-LOK 2 Housings pages Mini-Universal MTE-N-LOK Housings pages , 6, 8 and 10 Circuit, Dual Row 9, 12 and 15 Circuit, Matrix Number of Pin Pin Header Part Numbers Style Dim. Finish with Drain Holes 4 Dual Row.645 Tin Duplex Dual Row.808 Tin Duplex Dual Row.971 Tin Duplex Matrix.808 Tin Duplex Dual Row Tin Duplex Matrix.971 Tin Duplex [16.38].808 [20.52].640 [16.26].640 [16.26].215 [5.46].215 [5.46] Mates with Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MTE-N-LOK MTE-N-LOK Matrix Tin Duplex Tin Finish Plated with [.00381] min. tin over [.00127] min. nickel underplate on entire contact. 2Duplex Finish Plated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. Note: ll part numbers are RoHS Compliant. 104 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
7 MP Mini-Universal MTE-N-LOK 2 (Continued) Right-ngle PC Board Pin Centerline spacing Housing Nylon, white color Flammability Rating UL94V-0 Contacts Brass Solder tail diameter.039 [1.00] Product Specification Mini-Universal MTE-N-LOK 2 Recommended PC Board Hole Layout page 106 Mating Mini-Universal MTE-N-LOK 2 Housings pages Mini-Universal MTE-N-LOK Housings pages With Board Lock Feature 2 and 3 Circuit, In-Line 4, 6, 8, 10 and 12 Circuit, Dual Row.145 [3.68].270 [6.86].500 [12.70].236 [5.99].145 [3.68].500 [12.70].270 [6.86].225 [5.72].236 [5.99].145 [3.68].500 [12.70].270 [6.86] 14, 16, 18, 20, 22 and 24 Circuit, Dual Row Number of Pin Style Dim. Finish Pin Header Part Number with Board Lock 2 In-line.388 Tin Duplex In-line.551 Tin Duplex Dual Row.388 Tin Duplex Dual Row.551 Tin Duplex Dual Row.714 Tin Duplex Dual Row.877 Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex Dual Row Tin Duplex [5.99].386 [9.80].386 [9.80] Mates with Housing Part Number (Using Socket Contacts) Mini-Universal Mini-Universal MTE-N-LOK MTE-N-LOK Mini-Universal MTE-N-LOK 2 Centerline 1Tin Finish Plated with [.00381] min. tin over [.00127] min. nickel underplate on entire contact. 2Duplex Finish Plated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
8 MP Mini-Universal MTE-N-LOK 2 (Continued) Recommended PC Board Hole Layouts for Vertical and Blindmate.062 [1.57] thick board, tolerances non-accumulative Vertical pages and 3 Circuit, In-Line.055 [1.40].125 [3.18] 4, 6, 8, 10 and 12 Circuit, Dual Row.055 [1.40].125 [3.18] 9, 12 and 15 Circuit, Matrix 14, 16, 18, 20, 22 and 24 Circuit, Dual Row Mini-Universal MTE-N-LOK 2 Centerline Recommended PC Board Hole Layouts for Right- ngle.062 [1.57] thick board, tolerances non-accumulative Right-ngle page 105 [3.86].055 [1.40].0815 [2.070].055 [1.40].125 [3.18] 2 Circuit 3 Circuit 6 and 10 Circuit.055 ±.003 [1.40 ±.076] [4.45].055 [1.40] 3 Plc..125 [3.18] 2 Plcs [2.070] 4 Plc. [4.45].055 [1.40] [3.86] [3.86] 14 and 18 Circuit 4, 8 and 12 Circuit [3.86].055 [1.40].055 [1.40] [3.86].326 [8.280] 22 Circuit 16, 20 and 24 Circuit.055 [1.40].0815 [2.070] 4 Plc..055 [1.40] [3.86].489 [12.42] [3.86].407 [10.35] 106 Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
9 MP Mini-Universal MTE-N-LOK 2 (Continued) Mini-Universal MTE-N-LOK 2 Connector Mating Combinations Connector Part Number Mating Connector Part Number PC Board Pin 4 Number Flammability Style 1 1 of Vertical Right-ngle Rating Housing Housing Part No. Part No. Plating With Without Blindmate Board Drain Holes Drain Holes Lock UL94V-2 In-Line Tin UL94V-0 In-Line Duplex UL94V-2 In-Line Tin UL94V-0 In-Line Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Matrix Tin UL94V-0 Matrix Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Matrix Dual Row Tin Matrix Duplex UL94V-0 Tin Dual Row Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Matrix Tin UL94V-0 Matrix Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex UL94V-2 Dual Row Tin UL94V-0 Dual Row Duplex Mini-Universal MTE-N-LOK 2 plug and cap housings accept pin or socket contacts. Use the appropriate contacts in the plug housing as required by the mating connector. ll s and s are free-hanging. 2Duplex Finish Plated with [ ] min. gold in mating area and matte tin on solder tail end over [.00127] min. nickel underplate on entire contact. 3Tin Finish Plated with [.00381] min. tin over [.00127] min nickel underplate on entire contact. 4ll PC Board pin headers have 94V-0 flammability rating and can mate to V-0 or V-2 plug housings. Mini-Universal MTE-N-LOK 2 Centerline Note: ll part numbers are RoHS Compliant. Catalog Dimensions are in inches and Dimensions are shown for US: South merica: are metric equivalents. to change. C. merica: UK:
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
More informationUniversal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More informationThe con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More informationPwrMAX High Power Connector System (Preliminary)
1 of 14 5 1.0 OBJECTIVE 2.0 SCOPE This specification defines the performance, test, quality and reliability requirements of the PwrMAX Power Connector System. 3.0 GENERAL This specification is applicable
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More informationCMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationProduct Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 3.0, BMI Wire-to-Wire BMI Connector System Americas Headquarters isle, Illinois
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More informationMinitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More informationMar11 Rev C
Product Specification 108-1956 11Mar11 Rev C PC/104 and PC/104-Plus Connector Systems 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity
More informationGLOW WIRE CONNECTORS Product Summary
Industry photo: should be a the same image as larger industry photo. Either a different crop or different angle. Human photo. Can be environmental/documentaty style or portrait of engineer. industry photo.
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
More informationHigh Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z Interconnection Systems) Catalog Revised 8-04
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z s) Catalog 6594 Revised 8-04 High Speed Stacking Connectors (Parallel and Right-ngle Board-to-Board) Stacking Height
More informationDDR4 DIMM Sockets, Halogen-free
Meeting JEDEC specifications, these high-speed sockets offer greater PCB real-estate and cost savings with excellent assembly processing compatibility Meeting JEDEC specifications, Molex s Vertical SMT
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationUltra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationPRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More informationElma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationTX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors x [1.7 x 1.7] x [1.7 x.54] AMPMODU mm Connectors x [.54 x.54].15 x.15 [3.18 x 3.18].156 [3.96] 1 3 4 5 6 7 Disclaimer While Tyco Electronics
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More informationUSB 3.0 Plug & Receptacle
USB 3.0 Plug & Receptacle 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods and quality requirements of Tyco lectronics Universal Serial Bus (USB)
More informationD-3100S Standard 1-Row Type
(Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Used for both signal circuit and power/power supply circuit applications. Able to carry 15A max. of current per position
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More information.050" IDC Connectors for.025" Ribbon Cable - M73 Series
.050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single
More informationPNI Connectors. 2.0mm pitch wire to board/wire to wire solutions. Purpose:
PNI Connectors 2.0mm pitch wire to board/wire to wire solutions Purpose: To introduce the PNI wire-to-board and wire-to-wire, crimp style connector from JST. Objectives: Illustrate the intended application.
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationMini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
More informationMetrimate Pin and Socket Connectors. Table of Contents
Product Facts Recognized under the Component Program of U n d e rwriters Laboratories Inc., File No. E28476 Certified by Canadian Standards Association, File No. LR7189 Tested to VDE requirements outlined
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More information3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More informationModular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
More informationSINGLE ROW BREAKAWAY HEADER
SINGLE ROW REKWY HEDER 3986 SERIES SERIES. 3.96mm(0.156 ). Round Pin. For PC Solder! vailable in 1through 20 circuits! Mates with 3940, 3950, 3970, 3971 and 3972 series! Insulator Material: Nylon 6/6 UL
More informationPCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
More informationProduct Specification
Product Specification PR041-01 Revision A0 (Date 4-3-2017) Stewart Connector 11118 Susquehanna Trail South Glen Rock, Pa. 17327-9199 Ph: (717) 235-7512 Fax: (717) 235-4675 Product Specification PR0410-01
More informationFASTON Printed Circuit Board Tabs and Receptacles
FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion
More informationMinitek Pwr 4.2 BMI Product Presentation
BMI Product Presentation Basics Portfolio BMI Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Stacking Height Matrix Markets & Applications Collaterals
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More information1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
More informationCMC CP Terminals CP 0.635mm (.025 ) CP 1.50mm (.059 ) CP 2.80mm (.110 ) FEATURES AND SPECIFICATIONS
FEATURES AND SPECIFICATIONS CMC Connectors sealed, high-density, modular and cost-effective connection system for heavy-duty applications The CMC connector family from Molex is a sealed, high-density connection
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFITION PAGE: 1 OF 7 REV: A Serial ATA Connector, (22SAPP-X-X) LIST OF REVISION REV PAGE DESCRIPTION ECN. NO. DATE A 01-07 NEW E9201035 01/24/03 PRODUCT SPECIFITION PAGE: 2 OF 7 REV: A Serial
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationAug04 Rev D EC
Product Specification 108-1163 18Aug04 Rev D EC 0990-1127-04 Modular Plugs, Thru-Hole and Surface Mount Jacks, Data and Telephone, PCB Mounted 1. SCOPE 1.1. Content This specification covers the performance,
More informationHEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2.5mm,HDR,2pos,Vertical, Connector HPI
More informationMinitek Pwr 3.0 BMI Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Specifications Features & Benefits Part Numbers Markets & Applications Marcom Collaterals Product Presentation - 2 Value Proposition
More informationAMP Circular Connectors for Commercial Signal & Power Applications. RoHS. Ready
MP Circular Connectors for Commercial Signal & Power pplications RoHS Ready Introduction 2 Product Facts Lightweight, all-plastic and metal-shell connectors connectors are UL 94V-0 rated and made of stabilized,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP) Receptacle 74441
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More informationTable of Contents. AMP Circular Connectors for Commercial Signal and Power Applications. Note: All part numbers are RoHS Compliant.
MP Circular Connectors for Commercial Signal & Power pplications RoHS Ready Introduction 2 Product Facts Lightweight, all-plastic and metal-shell connectors connectors are UL 94V-0 rated and made of stabilized,
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationFile E28476 Project 01ME June 27, 2001 REPORT COMPONENT - CONNECTORS FOR USE IN DATA, SIGNAL, CONTROL AND POWER APPLICATIONS
File E28476 Project 01ME05381 June 27, 2001 REPORT On COMPONENT - CONNECTORS FOR USE IN DATA, SIGNAL, CONTROL AND POWER APPLICATIONS Tyco Electronics Corp., Harrisburg, PA Copyright 2001 Underwriters Laboratories
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More information