F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 004 : 4 pin 006 : 6 pin 00
|
|
|
- Godwin Ross
- 5 years ago
- Views:
Transcription
1 2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES K-1
2 F SERIES 2.5mm PITH DRWER ONNETOR ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 004 : 4 pin 006 : 6 pin 00 : pin 0 : pin 0 : pin 014 : 14 pin onnector type 11 : Plug, P side connector Series name F : 2.5mm pitch drawer connector No. of contacts No. of contacts onnector type : able plug, able side connector for cable to cable (Housing) Series name F : 2.5mm pitch drawer connector 016 : 16 pin 01 : 1 pin 020 : 20 pin 022 : 22 pin 024 : 24 pin 026 : 26 pin onnector type 01 : Receptacle, able side connector (Housing) Series name F : 2.5mm pitch drawer connector *bove order code F01- - is for the housing only, contact terminals are sold separately. bout #566 order code, please refer next page. *Pin counts for without positoning post type will be added to the line up accordingly. Please contact your local sales office for consideration and purchasing. 004 : 4 pin 006 : 6 pin 00 : pin 0 : pin 0 : pin 014 : 14 pin 016 : 16 pin 01 : 1 pin 020 : 20 pin 006 : 6 pin 00 : pin 0 : pin 020 : 20 pin 02 : 2 pin 030 : 30 pin 032 : 32 pin 034 : 34 pin 03 : 3 pin 040 : 40 pin 022 : 22 pin 024 : 24 pin 026 : 26 pin 02 : 2 pin 030 : 30 pin 032 : 32 pin 034 : 34 pin 040 : 40 pin 024 : 24 pin 034 : 34 pin 03 : 3 pin 040 : 40 pin *bove order code F- is for the housing only, contact terminals are sold separately. bout #570 order code, please refer next page. FETURES 2.5mm pitch drawer connector. Receptacle (F:able side connector), Plug(F11:P side connector) and able plug (F:able side connector for cable to cable) are available and can accommodate a wide range of usage. bsorbs ±3mm gap in X and Y directions when mating. Floating structure of the screwed area enables ±1.4mm displacement in X and Y directions in mated condition. Highly reliable design with effective contact displacement of 3mm. rimping termination for cable assembly. #22 WG, #24 WG, #26 WG and #2 WG are applicable. Dust resistant twin-reaf pinching 2 point contact structure. Live insertion and withdrawal type available. *able plug type connector (F) has live insertion and withdrawal. structure to prevent miss insertion. Rich pin count variations. able side connector (F01) : 4, 6,,,, 14, 16, 1, 20, 22, 24, 26, 2, 30, 32, 34, 3 and 40 pins. P side connector (F11) : 4, 6,,,, 14, 16, 1, 20, 22, 24, 26, 2, 30, 32, 34 and 40 pins. able plug for cable to cable (F) : 6,,, 20, 24, 34, 3 and 40 pins. RoHS compliance. Insulator material ontact material ontact plating Washer / Rivet material urrent rating ontact resistance Dielectric withstanding voltage Insulation resistance Operating temperature Durability of insertion and withdrawal SPEIFITIONS : Glass-filled PT (UL94V-0), lack : opper alloy : Gold over Nickel (ontact /Terminal area) Tin over Nickel (rimping area) : Stainless steel : 3 per contact : 30mΩ max. : 650V for 1 minute : 00MΩ min. at 500V D : -40 to +5 : 500 times *High mating cycle endurance type (5,000 times min.) is also available, please contact your local sales office. PRODUT OUTLINE F Series is 2.5mm pitch drawer connector. Drawer connector can absorb the misalignment of two units and is used in between such as toner cartridge or paper tray and main body of multi function printer where mating position is not visible or angled mating occurs. The high spec design with such as mating guide, miss insertion prevention, floating and buckling prevention structure enables to solve customer's problems such as bucking of contact pins, mating adjustment, stress when mating and contact failure. The variation of having both board to cable type and cable to cable type offers wide range of usage such as industrial, O and gaming. K-2
3 F SERIES 2.5mm PITH DRWER ONNETOR ontact Terminal ontact terminal for F01- - receptacle (able side connector) ORDER ODE #566 ontact terminal for F- cable plug (able side connector for cable to cable) 4.6(0.11) 4.65(0.13) ORDER ODE #570 Mating cable Omit : #22 WG, #24 WG and #26 WG (able diameter : φ1.00mm to 1.70mm) 1 : #26 WG and #2 WG (able diameter : φ0.mm to 1.20mm) Gold plating thickness (ontact area) Omit : 0.05µm min. D : 0.25µm min. ontact #566 : rimp type for F01 0.2(0.00) 1(0.039) 0.2(0.00) 1(0.039) 2 (0.079) 4.6(0.11) 3.9(0.154) 2.15 (0.05) 4(0.157) 2 (0.079) 3.55 (0.140) Mating cable Omit : #22 WG, #24 WG and #26 WG (able diameter : φ1.00mm to 1.70mm) 1 : #26 WG and #2 WG (able diameter : φ0.mm to 1.20mm) ontact #570 : rimp type for F 14(0.551) Tape&Reel Part Number Number of #566 #566-1 #570 # (0.150) 3.55(0.140) 3.0(0.150) 3.55(0.140) 2.0(0.079) 2.0(0.079),000,000 7,500 7,500 Twin-Leaf Pinching 2 Point ontact Structure With the KEL original twin-leaf pinching 2 point contact structure, the flat plate type contact of plug connector is inserted into the contact of receptacle connector ( part of the figure on the right side) for electrical contact. The flat plate shaped contact of plug connector is tolerant of buckling compared to pin header type contact, and the stable contact force of the pinching structure of receptacle connector assures high reliability of electrical contact. The twin-leaf pinching 2 point contact structure is a contact method well acknowledged for our GF series battery connector which has high sales and is highly evaluated in lap top computer market. ssembly Tool ontact terminal for F11 plug (P side connector) Hand Tool Part Number Mating able Mating ontact H-01 #22 WG, #24 WG #566, #570* Twin-leaf pinching 2 point contact structure ontact terminal for F01 receptacle (able side connector) H-02 #26 WG, #2 WG #566-1, #570-1 *Please consult with your local sales office for using H-01 to crimp #570 contact. [Note] Please contact your local sales office for crimping #566 or #570 contact to WG#26 cable with the hand tool. rimping Machine Mating ontact #566 #566-1 #570 #570-1 Manufacture rimping Machine pplicator JPN UTOMTI MHINE O., LTD LP220S FS7790 FS15200 FS79 FS130 K-3
4 F SERIES 2.5mm PITH DRWER ONNETOR F01- - (Receptacle, Housing) Receptacle (able side connector) D 5.05(0.199) 6.25(0.246) Unit:mm(inch) 2.9(0.50).1(0.319) 9.4(0.370) 2-3.2( 0.6) 2- ( 0.394) X X-X ross Section (ontact Inserted) E X' 2( 0.079) 0.(0.031) 0.6(0.024) 5.7(0.224) 19.45(0.766) 19(0.7) 5.5(0.217) 11.5(0.453) 1.(0.071) 2.5(0.09) pitch KEL JPN Lot No. Tray 16(0.630) min. Printed ircuit oard Layout (omponent Side View) 2-3.2±0.05( 0.6±0.002) 9(0.354) max. ±0.1(±0.004) 9(0.354) max. 5.05±0.1 (0.199±0.004) 5.5±0.1 ( 0.217±0.004) 6.25±0.1(0.246±0.004) No. of contacts Part Number D E Number of F F F F01-0- F01-0- F F F F F F F F F F F F F (1.417) 3.5 (1.516) 41.0 (1.614) 43.5 (1.713) 46.0 (1.11).5 (1.909) 51.0 (2.00) 53.5 (2.6) 56.0 (2.205) 5.5 (2.303) 61.0 (2.402) 63.5 (2.500) 66.0 (2.59) 6.5 (2.697) 71.0 (2.795) 73.5 (2.94) 7.5 (3.091) 1.0 (3.19) 25.5 (1.004) 2.0 (1.2) 30.5 (1.201) 33.0 (1.299) 35.5 (1.39) 3.0 (1.496) 40.5 (1.594) 43.0 (1.693) 45.5 (1.791).0 (1.90) 50.5 (1.9) 53.0 (2.07) 55.5 (2.15) 5.0 (2.23).5 (2.32) 63.0 (2.0) 6.0 (2.677) 70.5 (2.776) (0.591) 17.5 (0.69) 20.0 (0.77) (0.6) 25.0 (0.94) (1.03) 30.0 (1.11) 32.5 (1.20) 35.0 (1.37) 37.5 (1.476) 42.5 (1.673) 45.0 (1.7) (1.70) 50.0 (1.969) 55.0 (2.165) 57.5 (2.264) 5.7 (0.224).2 (0.323).7 (0.421) 13.2 (0.520) 15.7 (0.61) 1.2 (0.717) 20.7 (0.15) 23.2 (0.913) 25.7 (1.0) 2.2 (1.1) 30.7 (1.209) 33.2 (1.307) 35.7 (1.406) 3.2 (1.504) 40.7 (1.2) 43.2 (1.701).2 (1.9) 50.7 (1.996) 2.5 (0.09) 5.0 (0.197) 7.5 (0.295).0 (0.394) (0.591) 17.5 (0.69) 20.0 (0.77) (0.6) 25.0 (0.94) (1.03) 30.0 (1.11) 32.5 (1.20) 35.0 (1.37) 37.5 (1.476) 45.0 (1.7) (1.70) K-4
5 F SERIES 2.5mm PITH DRWER ONNETOR F11- (Plug) Plug (P side connector) Unit:mm(inch) D E ( 0.6) JPN 024 KEL 01.6(0.339) 9.5(0.374).9(0.50) X-X ross Section X 11.5(0.453) (0.315) 15(0.591) 3±0.5(0.11±0.020) 2.5(0.09) pitch (0.11) X' 0.5(0.020) 0.6(0.024) 2( 0.079) Lot No. 5.75(0.226) 0.7(0.02) 2.5(0.09) 2-3.5±0.1( 0.13±0.004) 2.5±0.05 (0.09±0.002) "n" is number of contacts. Printed ircuit oard Layout (omponent Side View) E±0.05(E±0.002) 2.5±0.05(0.09±0.002) pitch 5.75±0.05(0.226±0.002) ±0.1(±0.004) 2 n- 1±0.05 ( 0.039±0.002) ±0.05 ( 0.09±0.002) Pipe No. of contacts Part Number D E Number of F F11-00 F11-0 F11-0 F F F11-01 F F F F F11-02 F F F F (1.173) 34. (1.370) 37.3 (1.469) 39. (1.567) 42.3 (1.665) 44. (1.764) 47.3 (1.62) 49. (1.961) 52.3 (2.059) 54. (2.157) 57.3 (2.256) 59. (2.354) 62.3 (2.453) 64. (2.551) 67.3 (2.650) 74. (2.945) 23.6 (0.929) 2.6 (1.6) 31.1 (1.224) 33.6 (1.323) 36.1 (1.421) 3.6 (1.520) 41.1 (1.61) 43.6 (1.717) 46.1 (1.15).6 (1.913) 51.1 (2.0) 53.6 (2.1) 56.1 (2.209) 5.6 (2.307) 61.1 (2.406) 6.6 (2.701) 16.2 (0.63) 21.2 (0.35) 23.7 (0.933) 26.2 (1.031) 2.7 (1.130) 31.2 (1.22) 33.7 (1.327) 36.2 (1.425) 3.7 (1.524) 41.2 (1.622) 43.7 (1.0) 46.2 (1.19).7 (1.917) 51.2 (2.016) 53.7 (2.114) 61.2 (2.409). (0.504) 17. (0.701) 20.3 (0.799) 22. (0.9) 25.3 (0.996) 27. (1.094) 30.3 (1.193) 32. (1.291) 35.3 (1.390) 37. (1.) 40.3 (1.57) 42. (1.65) 45.3 (1.73) 47. (1.2) 50.3 (1.90) 57. (2.276) 2.5 (0.09) 7.5 (0.295).0 (0.394) (0.591) 17.5 (0.69) 20.0 (0.77) (0.6) 25.0 (0.94) (1.03) 30.0 (1.11) 32.5 (1.20) 35.0 (1.37) 37.5 (1.476) (1.70) K-5
6 F SERIES 2.5mm PITH DRWER ONNETOR F- (able Plug, Housing) able Plug (able side connector for cable to cable) Unit:mm(inch) 2 D E 2.5(0.09) pitch 3-R1(R0.039) X-X ross Section 1 JPN 020 KEL ( 0.130) X (0.6) 9.5(0.374) 25(0.94).9(0.50) 4(0.157) X' *Hot-swap positions 1 and n/2 are two places. 1 3(0.11) 2.5(0.09) F 2.5(0.09) 2.5±0.1(0.09±0.004) Printed ircuit oard Layout (omponent Side View) ±0.1(±0.004) F+1±0.1(F+0.039±0.004) 2-3.3±0.1 ( 0.130±0.004) 2.5±0.1 (0.09±0.004) 4±0.1 (0.157±0.004) 13.9±0.1(0.547±0.004) Number No. of contacts Part Number D E F-006 F-00 F-0 F-020 F-024 F-034 F-03 F (1.701) 45.7 (1.799) 50.7 (1.996).7 (2.390) 65.7 (2.57) 7.2 (3.079) 3.2 (3.276) 5.7 (3.374) 32.7 (1.27) 35.2 (1.36) 40.2 (1.53) 50.2 (1.976) 55.2 (2.173) 67.7 (2.665).7 (2.62) 75.2 (2.961) 1.7 (0.736) 21.2 (0.35) 26.2 (1.031) 36.2 (1.425) 41.2 (1.622) 53.7 (2.114) 5.7 (2.311) 61.2 (2.409) 15.3 (0.2) 17. (0.701) 22. (0.9) 32. (1.291) 37. (1.) 50.3 (1.90) 55.3 (2.177) 57. (2.276) 5.0 (0.197) 7.5 (0.295).5 (0.6) (1.03) 45.0 (1.7) (1.70) F 15.7 (0.16) 1.2 (0.717) 23.2 (0.913) 33.2 (1.307) 3.2 (1.504) 50.7 (1.996) 55.7 (2.193) 5.2 (2.291) Tray of 4 4 K-6
2.5mm Pitch Drawer Connector Crimping Termination for Cable Assembly FA SERIES A-1
2.5mm Pitch Drawer onnector rimping Termination for able ssembly F SERIES -1 ORDER ODE F 01 F 11 F Positioning post Omit : With post 1 : Without post No. of contacts 008 : 8 pin 020 : 20 pin 0 : pin 022
PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors
PSI ONNETOR.0mm pitch/disconnectable rimp style connectors Wire-to-wire type Secure locking structure Mis-mating prevention mechanism by keying ( to circuits/ kinds of keying) Finger-friendly design Large
Dynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
Product Compliant to DIN41612/IEC603-2 Standard
Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
P Series 79 Micro-rimp Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight P Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits.
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
Archer Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
JFA CONNECTOR J2000 SERIES
JF J000 JF ONNETOR J000 SERIES.5mm pitch/disconnectable rimp style connectors(wire-to-board/wire-to-wire) Specifications urrent rating:.6 max., D ( circuits/wg #0) Voltage rating: 50V, D Temperature range:
PC BOARD CONNECTORS 740 SERIES
P ORD ONNETORS 740 SERIES FETURES Various types of headers are available: one side shrouded, both sides shrouded, with simplified latch, and box type. The connector having a simplified latch prevents the
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
micro SIM Card Connector SF56 Series
OMPONENTS PRODUT INFORMATION NEW micro SIM ard onnector SF56 Series ONNETOR MB-0256-2 October 204 RoHS ompliant Smartphones and tablet P equipping micro SIM (FF UI) ards are increasing. The
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
CROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
MDSM is the commercial industry s
MSM is the commercial industry s smallest -type connector for shielded I/O wire-to-board applications. Requiring less than 1/3 the area of a traditional Subminiature connector, MSM is designed for situations
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
SYSTEM CJ TELEPHONE JACKS & MODULAR PLUGS
SYSTEM TELEPHONE JKS & MODULR PLUGS vilux Introduction System contains splice termination regular modular plugs, category 5 modular plugs and board mount and surface mount telephone jacks. The modular
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
Commercial Connector Catalog
ommercial onnector atalog Delphi onnection Systems is a global leader as a connection system provider. We offer full-service integration designing, engineering and manufacturing a comprehensive line of
TX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
KH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Bergstak 0.80mm Pitch Product Presentation
Bergstak 0.80mm Pitch Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
NARROW PITCH (0.4mm) CONNECTORS P4 SERIES
Without soldering terminal With soldering terminal NARROW-PITH ONNTORS FOR BOARD-TO-BOARD AND BOARD-TO-FP ONNTION FATURS 1. 0.4 mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
.050" IDC Connectors for.025" Ribbon Cable - M73 Series
.050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single
Right angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
Terminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
MTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
Advance Concept Release for. Initial Pre-Production Sampling Only. Device Bay Connector System
Advance Concept Release for Initial Pre-Production Sampling Only R Device Bay Connector System Molex Device Bay Interconnection System Simplifying PC & Peripheral Installation and Upgrades Driven by customers
.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series CONNECTOR MB-0281-3
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
Stacking Type Board-to-Board (FPC) Connector. WP10 Series
COMPONENTS PRODUCT INFORMATION NEW Stacking Type Board-to-Board (FPC) Connector WP10 Series CONNECTOR MB-0303-2 October 2015 RoHS Compliant Plug Receptacle The WP10 Series is a stacking type
0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
AMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
Table of Contents Interface Module Systems
UHNN Terminal locks Note: ll part numbers are RoHS ompliant. Table of ontents Interface Module Systems Overview (atalog Numbering ode) 196 Interface Modules 197-204 DIN 41612 onnector 198 Telco onnector
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
SM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
Connector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
USB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
AirMax POWER CONNECTOR MODULES Part of the AirMax Connector Family
Part of the AirMax Connector Family HIGH PERFORMING AND DURABLE CONNECTORS Hard Metric high power connectors are a perfect complement to AFCI s ExaMAX, AirMax, ZipLine and Millipacs signal connectors.
USB Type-C TM Connector DX07 Series Vertical Plug
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Vertical Plug CONNECTOR MB-0332-1 July 2018 RoHS Compliant *Plug will be packaged with protective cap on. Protective Cap The DX07
IDC for 25mil(0.635mm) flat cable with One-touch locking ejector system 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8825E SERIES C-49
IDC for 25mil(0.635mm) flat cable with One-touch locking ejector system mil(1.27mm) PITCH 2 PIECE CONNECTOR 8825E SERIES C-49 C- 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 0.635mm (25mil) FC Product Concept
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
Hirose Micro-USB Connectors and C07
Page 1 of 28 Hirose Micro-USB Connectors and C07 Page 2 of 28 What is Micro-USB? Several connector suppliers including Hirose submitted new connector designs to the USB meeting upon request from mobile
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
50mil(1.27mm) PITCH 2 PIECE CONNECTOR Hi-PACKEL 8800 SERIES C-3
mil(.7mm) PITH PIEE ONNETOR Hi-PKEL 80 SERIES -3 .7mm PITH PIEE ONNETOR / Hi-PKEL TM The New Symbol of the High Desity Matig ge otact cross sectio otacts with matig poits straight-beam costructio (Pateted)
7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
![2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)](/thumbs/96/127052325.jpg "2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)")
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
Amphenol. Amphenol. I/O Products. High Speed Interconnects
Amphenol High Speed Interconnects I/O Products Amphenol Now you re Now you re connected connected Amphenol High Speed Interconnects THE COMPANY Amphenol is a global provider of interconnect solutions to
1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
HIGH SPEED MEZZANINE APPLICATION SPECIFICATION
APPLIATION SPEIFIATION BOARD TO BOARD ONNETOR 75005 Receptacle Assembly 75003 Plug Assembly Table of ontents 1.0 Scope 2.0 Product Description 3.0 Applicable Documents and Specifications 4.0 Insertion
D-3100S Standard 1-Row Type
(Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Used for both signal circuit and power/power supply circuit applications. Able to carry 15A max. of current per position
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
FOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
AMPMODU Headers and Receptacles,.100 [2.54] Centerline
![AMPMODU Headers and Receptacles,.100 [2.54] Centerline](/thumbs/77/75178796.jpg "AMPMODU Headers and Receptacles,.100 [2.54] Centerline")
MPMODU.02 [0.64] Square Interconnection System MPMODU Headers and Receptacles, enterline 6-146293-0 SR VT-RET 6-146281-0 SR VT 6-146490- DR Stacking Header 6-341-0 SR Top Entry 8760-1 ulkhead Header 6-34237-8
2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
XH5 SMT-compatible Connectors with a 1.27-mm Pitch
New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.
JK SERIES. SUBMINIATURE CONNECTOR Crimp style plug and socket. Features. Standards. Specifications CRIMP STYLE PLUG AND SOCKET
D SUBMINIATURE CONNECTOR Crimp style plug and socket CRIMP STYLE PLUG AND SOCKET JK SERIES 01 Crimp style plug Crimp style socket Pin contact Socket contact Features The dimples in the shell provide the
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
DDR4 DIMM Sockets, Halogen-free
Meeting JEDEC specifications, these high-speed sockets offer greater PCB real-estate and cost savings with excellent assembly processing compatibility Meeting JEDEC specifications, Molex s Vertical SMT
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169