Inolux Technologies 0.8 Single Digit Numeric Display HNTS80 Series
|
|
|
- Alison Barber
- 6 years ago
- Views:
Transcription
1 Inolux Technologies 0.8 Single Digit Numeric Display Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 1/17
2 DISCLAIMER... 3 ORDERABLE INFORMATION... 4 FEATURES... 5 SCHEMATIC DRAWING... 6 PRODUCT CHARACTERISTIC... 7 ABSOLUTE MAXIMUM RATING... 7 ELECTRICAL AND OPTICAL CHARACTERISTIC... 8 CHARACTERISTIC CURVES FOR UB... 9 CHARACTERISTIC CURVES FOR UTG CHARACTERISTIC CURVES FOR UYG CHARACTERISTIC CURVES FOR UY CHARACTERISTIC CURVES FOR UA CHARACTERISTIC CURVES FOR UR CHARACTERISTIC CURVES FOR USR REFLOW SOLDERING SOLDERING IRON REWORK REVISION HISTORY Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 2/17
3 DISCLAIMER l The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by INOLUX for any infringements of intellectual property or other rights of the third parties which may result from it use. l l l l Inolux is continually effort to improve the quality of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing INOLUX products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such INOLUX products cause loss of human life, bodily injury or damage to property. The INOLUX products listed in this document are intended for usage in general electronics (computer, personal equipment, office equipment, industrial robotics, domestic, etc ) These products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. In developing your designs, please ensure that INOLUX products are used within specified operating ranges as set forth in the most recent INOLUX products specifications. Also, please keep in mind the precautions listed in this document. Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 3/17
4 Orderable Information H N T S 80 X X X - X X X X HNTS Series Name Digit Height Color Code Polarity Customer Code H: Inolux Technologies N: Numeric T: Through Hole S: Single 80: 0.8 digit height UB: 470nm InGaN Blue UTG: 525nm InGaN True Green UYG: 570nm AllnGaP Yellow Green UY: 590nm AllnGaP Yellow UA: 606nm AllnGaP Amber UR: 625nm AllnGaP Hyper Red USR: 639nm AllnGaP Super Red CA: Common Anode CC: Common Cathode XXXX: Customer specific code Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 4/17
5 Features 0.8 (20.4mm) Digit Height Through Hole Display Black Face, White Segment RoHS Compliant, Pb Free Note: Dimension is in millimeters. Tolerance is ±0.25mm unless otherwise noted. Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 5/17
6 Schematic Drawing Common Anode Common Cathode Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 6/17
7 Product Characteristic Absolute Maximum Rating (T a = 25 C ) Product HNTS80UBCA/ HNTS80UBCC HNTS80UTGA/ HNTS80UTGC HNTS80UYGA/ HNTS80UYGC HNTS80UYA/ HNTS80UYC HNTS80UAA/ HNTS80UAC HNTS80URA/ HNTS80URC HNTS80USRA/ HNTS80USRC Emission Color P AD I AF I PF V R (mw) (ma) (ma) (V) Derate From T OP ( C) T ST ( C) 25 C (ma/ C) Blue ~ ~ True Green ~ ~ Yellow Green ~ ~ Yellow ~ ~ Amber ~ ~ Hyper Red ~ ~ Super Red ~ ~ Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 7/17
8 Electrical and Optical Characteristic (T a = 25 C ) Product HNTS80UBCA/ HNTS80UBCC HNTS80UTGA/ HNTS80UTGC HNTS80UYGA/ HNTS80UYGC HNTS80UYA/ HNTS80UYC HNTS80UAA/ HNTS80UAC HNTS80URA/ HNTS80URC HNTS80USRA/ HNTS80USRC Luminous Intensity tolerance = +/- 15% Emission V F (V) λ (nm) I V (mcd) I R (µa) I F (ma) Color Typ. Max. λd Δλ Typ. Max Blue (V R =8V) True Green (V R =8V) Yellow Green (V R =5V) Yellow (V R =5V) Amber (V R =5V) Hyper Red (V R =5V) Super Red (V R =5V) Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 8/17
9 Characteristic Curves for UB Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 9/17
10 Characteristic Curves for UTG Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 10/17
11 Characteristic Curves for UYG Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 11/17
12 Characteristic Curves for UY Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 12/17
13 Characteristic Curves for UA Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 13/17
14 Characteristic Curves for UR Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 14/17
15 Characteristic Curves for USR Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 15/17
16 Reflow Soldering Soldering Iron Basic Spec is 4 sec. when 260 C (+10 C è -1 second). Power dissipation of Iron should be less than 15W. Surface temperature should be under 236 C Rework Rework should be completed within 4 second under 245 C Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 16/17
17 Revision History Changes since last revision Page Version No. Revision Date Initial Release for Official Product Customer Part No. Data Sheet No. **************** **************** May 01, 2013 Version of 1.0 Page 17/17
Inolux Technologies x7 Dot Matrix Display
Inolux Technologies 0.67 5x7 Dot Matrix Display Official Product Customer Part No. Data Sheet No. **************** **************** May 08, 2013 Version of 1.0 Page 1/17 DISCLAIMER... 3 ORDERABLE INFORMATION...
Inolux Super Flux Led Lamp with 5mm Dome
Inolux Led Lamp with 5mm Dome HT-PR80XXX Series June 27, 2013 Version of 1.0 Page 1/12 DISCLAIMER INOLUX reserves the right to make changes without further notice to any products herein to improve reliability,
QT-Brightek SMD Display Series Four Digit SMD Display
QT-Brightek SMD Series 0.40 Four Digit SMD Part No.: QBQS40ZXX XX= Color Z= 1: Common Cathode Z = 0: Common Anode Product: QBQS40ZXX Date: November 20, 2015 Page 1 of 11 Table of Contents: Introduction...
QT-Brightek SMD Display Series Dual Digit SMD Display
QT-Brightek SMD Series 0.20 Dual Digit SMD Part No.: QBDS20ZXX XX= Color Z= 1: Common Cathode Z = 0: Common Anode Product: QBDS20ZXX Date: October 27, 2015 Page 1 of 11 Table of Contents: Introduction...
Harvatek International Infrared Through-Hole Lamp HE3-290AC-XXXX
Harvatek International Infrared Through-Hole Lamp Official Product Data Sheet No. Customer Part No. **************** August 5, 2009 Version of 1.0 Page 1/7 DISCLAIMER HARVATEK reserves the right to make
QT-Brightek Display Series Four Digit Display
QT-Brightek Display Series 0.28 Four Digit Display Part No.: QBQ28XXZ XX= Color Z= 1: Common Cathode Z = 0: Common Anode Product: QBQ28XXZ_series Date: September 21, 2015 Page 1 of 11 Table of Contents:
QT-Brightek Display Series Three Digit Display
QT-Brightek Display Series 0.40 Three Digit Display Part No.: QBT40XXZ XX= Color Z= 1: Common Cathode Z = 0: Common Anode Product: QBT40XXZ_series Date: September 14, 2015 Page 1 of 12 Table of Contents:
QT-Brightek Display Series Dual Digit Display
QT-Brightek Display Series 0.56 Dual Digit Display Part No.: QBD56XXZ XX= Color Z= 1: Common Cathode Z = 0: Common Anode Product: QBD56XXZ_series Date: September 19, 2015 Page 1 of 11 Table of Contents:
DaTE CODE. PaRT NO. Mechanical dimensions REF. DaTE CODE PCB. Common anode. Common Cathode. 12 PIN No Connect
specifications Mechanical dimensions 1 SDsa28B2W 1. Dimension in millimeter (inch), and tolerance is 0.25 (.01) specified. 2. Specifications are subject to change without notice. nal EQuIvaLEnT CIRCuIT
QT-Brightek PLCC Series PLCC4 RGB LED
QT-Brightek PLCC Series PLCC4 RGB LED Part No.: QBLP1515B-RGBA Product: QBLP1515B-RGBA Date: December 11, 2017 Page 1 of 10 Table of Contents: Introduction... 3 Electrical / Optical Characteristic (T A
QT-Brightek Chip LED Series SMD Chip LED
QT-Brightek Chip LED Series 0402 SMD Chip LED Part No.: QBLP595 Series Product: QBLP595 Series Date: September 15, 2016 Page 1 of 12 Table of Contents: Introduction... 3 Electrical / Optical Characteristic
TLPGE183P TLPGE183P. Panel Circuit Indicator. Maximum Ratings (Ta = 25 C) TOSHIBA LED Lamp InGaAlP Pure Green Light Emission.
TLPGE8P TOSHIBA LED Lamp InGaAlP Pure Green Light Emission TLPGE8P Panel Circuit Indicator Unit in mm 5mm diameter(t /4) InGaAlP pure green LED All plastic mold type. Colorless clear lens Low drive current,high
QT-Brightek Chip LED Series. SMD Side View 0802 LED
QT-Brightek Chip LED Series SMD Side View 0802 LED Part No.: QBLP612 Series Product: QBLP612 Series Date: November 27, 2017 Page 1 of 12 Table of Contents: Introduction... 3 Electrical / Optical Characteristic
QT-Brightek Chip LED Series BI-Color LED
QT-Brightek Chip LED Series 1204 BI-Color LED Part No.: QBLP613-RIG-2790 Product: QBLP613-RIG-2790 Date: February 03, 2016 Page 1 of 12 Table of Contents: Introduction... 3 Electrical / Optical Characteristic
QT-Brightek Chip LED Series SMD 1208 LED
QT-Brightek Chip LED Series SMD 1208 LED Part No.: QBLP653 Series Product: QBLP653_series Date: November 10, 2016 Page 1 of 14 Table of Contents: Introduction... 3 Electrical / Optical Characteristic (T=25
QT-Brightek Chip LED Series SMD 1205 LED
QT-Brightek Chip LED Series SMD 1205 LED Part No.: QBLP655 series Product: QBLP655 series Date: August 30, 2016 Page 1 of 13 Table of Contents: Introduction... 3 Electrical / Optical Characteristic (Ta=25
QT-Brightek PLCC Series 3020 PLCC2 LED
QT-Brightek PLCC Series 3020 PLCC2 LED Part No.: QBLP676-XX Series XX = Color Code Product: QBLP676-XX Series Date: February 17, 2017 Page 1 of 12 Tablet of Contents: Introduction... 3 Electrical / Optical
TD6127BP TD6127BP. ECL Prescaller For Communications Radio. Features TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic
TOSHIBA Bipolar Digital Integrated Circuit Silicon Monolithic TD6127BP ECL Prescaller For Communications Radio TD6127BP is a 2 modulus prescaller developed for communications radio of PLL frequency synthesizer
QT-Brightek Chip LED Series. SMD 1206 Sideview LED
QT-Brightek Chip LED Series SMD 1206 Sideview LED Part No.: QBLP615 series Product: QBLP615_series Date: February 04, 2014 Page 1 of 13 Table of Contents Introduction... 3 Electrical / Optical Characteristic
Inolux Surface Mount High Power Ultraviolet LED IN-5053PUV
Inolux Surface Mount High Power Ultraviolet LED Official Product Product: Data Sheet No. Tentative Product **************** Sept. 9, 2015 Version of 2.0 Page 1/12 DISCLAIMER... 3 LABEL SPECIFICATIONS...
QT-Brightek PLCC-6 Series PLCC6 LED
QT-Brightek PLCC-6 Series PLCC6 LED Part No.: QBLP679-XXK Product: QBLP679-XXK_series Date: March 27, 2014 Page 1 of 12 Tablet of Contents: Introduction... 3 Electrical / Optical Characteristic (Ta=25
Opto Plus LED Corp x 8 Dot Matrix LED Display OPD-M58810LB-GW OPD-M58811LB-GW
EDIT HISTORY Version A : Nov. 21, 2013 Preliminary Spec. Version B: Sep. 16, 2015 Add package dimensions. Manufacture Examination Approving 1 FEATURES 2.30 inch (58.34 mm) Matrix Height. Stackable vertically
1Z6.2~1Z390, 1Z6.8A~1Z30A
TOSHIBA ZENER DIODE SILICON DIFFUSED JUNCTION TYPE 1Z6.2~1Z390, 1Z6.8A~A CONSTANT REGULATION TRANSIENT SUPPRESSORS Unit: mm Average Power Dissipation : P = 1 W Peak Reverse Power Dissipation : P RSM =
02DZ2.0~02DZ24 02DZ2.0~02DZ24. Constant Voltage Regulation Applications Reference Voltage Applications. Absolute Maximum Ratings (Ta = 25 C)
TOSHIBA Diode Silicon Epitaxial Planar Type 02DZ2.0~02DZ24 Constant Voltage Regulation Applications Reference Voltage Applications Unit: mm The mounting of four devices on an ultra-compact package allows
Harvatek Surface Mount LED Data Sheet HT-191 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** June 19, 2013 Version of 1.0 Page 1/23 DISCLAIMER... 3 PRODUCT SPECIFICATIONS... 4 ATTENTION:
Harvatek Surface Mount LED Data Sheet HT-170 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** June 18, 2013 Version of 1.0 Page 1/24 DISCLAIMER... 3 PRODUCT SPECIFICATIONS... 4 ATTENTION:
INolux RGB CHIP LED Data Sheet IN-B101FCH
INolux RGB CHIP LED Data Sheet Official Product IN Part No. Customer Part No. Data Sheet No. Preliminary Product **************** **************** April 10, 2015 Version of 1.0 Page 1/16 DISCLAIMER...
BDE6A5.0D-2 BDE6A5.0D-2. Low Capacitance ESD Protection for High Speed Data
BYD Microelectronics Co., Ltd. Low Capacitance ESD Protection for High Speed Data The Series is designed to protect high speed data lines from ESD. Its common anode design protects up to two separate I/O
CRY62~CRZ47 CRY62~CRZ47. Use in Communication, Automation and Measurement Equipment Constant Voltage Regulation Transient Suppressors
TOSHIBA Zener Diode Silicon Epitaxial Type CRY62~CRZ47 Use in Communication, Automation and Equipment Constant Regulation Transient Suppressors Unit: mm Average power dissipation: P = 0.7 W Zener voltage:
2SK117 2SK117. Low Noise Audio Amplifier Applications. Maximum Ratings (Ta 25 C) Electrical Characteristics (Ta 25 C)
TOSHIBA Field Effect Transistor Silicon N Channel Junction Type Low Noise Audio Amplifier Applications Unit: mm High Yfs : Yfs = 15 ms (typ.) (VDS = 10 V, VGS = 0) High breakdown voltage: VGDS = 50 V Low
Technical Data Sheet (Preliminary) Surface Mount Device
Features Small size. Low power consumption. Categorized for luminous intensity. Suitable for all SMT assembly methods Pb free. The product itself will remain within RoHS compliant version. Descriptions
Harvatek Surface Mount LED Data Sheet. HT-150 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Oct. 19, 2005 Version of 1.2 Page 1/25 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
02DZ2.0~02DZ24 02DZ2.0~02DZ24. Constant Voltage Regulation Applications Reference Voltage Applications. Maximum Ratings (Ta = 25 C)
TOSHIBA Diode Silicon Epitaxial Planar Type 02DZ2.0~02DZ24 Constant Voltage Regulation Applications Reference Voltage Applications Unit: mm The mounting of four devices on an ultra-compact package allows
Opto Plus LED Corp x 8 Dot Matrix LED Display OPD-M48810UPG-GW OPD-M48811UPG-GW
EDIT HISTORY Version A: Sep.16, 2015 Preliminary Spec. Manufacture Examination Approving 1 FEATURES 1.46 inch (31.00 mm) Matrix Height. Stackable vertically and horizontally. 8x8 array with X-Y select.
A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD.
1206 Package Yellow SMD Chip LED Lamps Package outlines & Re-flow Profile Reflow Temp./Time Temp. 240 Max. 10sec Max. 5 /sec Max. 60~120sec 4 /sec Max. Time Soldering iron Basic spec is 5sec when 260.
CRY62~CRZ47 CRY62~CRZ47. Applications: Communication, Control and Measurement Equipment Constant Voltage Regulation Transient Suppressors
TOSHIBA Zener Diode Silicon Epitaxial Type CRY62~CRZ47 Applications: Communication, Control and Equipment Constant Regulation Transient Suppressors Unit: mm Average power dissipation: P = 0.7 W Zener voltage:
Harvatek Surface Mount LED Data Sheet. HT-150 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Oct. 19, 2005 Version of 1.2 Page 1/25 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
QT-Brightek Lamp with Housing Series. 3mm Round Lamp with Eight level Housing
QT-Brightek Lamp with Housing Series 3mm Round Lamp with Eight level Housing Part No.: QBL7XX80D-_series Product: QBL7XX80D-_series Date: June 29, 2016 Page 1 of 10 Table of Contents: Introduction... 3
BDE2S5.0 BDE2S5.0. ESD Protection Diodes. In Ultra Small DFN1006-2L Package. Package Type DFN1006-2L
BYD Microelectronics Co., Ltd. ESD Protection Diodes In Ultra Small DFN1006-2L Package The Series is designed to protect voltage sensitive components from damage due to ESD. Excellent clamping capability,
TOSHIBA Photo-interrupter Infrared LED + Phototransistor TLP1243(C8)
TLP24(C8) Copiers, Printers and Fax Machines Air-conditioners Game Machines TOSHIBA Photo-interrupter Infrared LED + Phototransistor TLP24(C8) The TLP24 (C8) is a compact photointerrupter with a built-in
QT-Brightek Chip LED Series IR LED with Dome Lens
QT-Brightek Chip LED Series 1208 IR LED with Dome Lens Part No.: QBLP653-IR1 Product: QBLP653-IR1 Date: August 08, 2017 Page 1 of 9 Table of Contents: Introduction... 3 Electrical / Optical Characteristic
LTH3MM12V Series 3mm (T-1) Through Hole LED Built in Resistor for 12VDC
TM LTH3MM12V Series 3mm (T-1) Through Hole Built in Resistor for 12VDC LTH3MM12VFR44 - White Water-Clear T-1 (3 mm) HIGH BRIGHTNESS COLOR OPTIONS VIEWING ANGLE 3 / 35 12 Volt Applications Automotive Indoor
BDE6A5.0D-3 BDE6A5.0D-3. Low Capacitance ESD Protection for High Speed Data
BYD Microelectronics Co., Ltd. Low Capacitance ESD Protection for High Speed Data The Series is designed to protect high speed data lines from ESD. Its common anode design protects up to four separate
QT-Brightek High Power Series. 3W High Power UV LED
QT-Brightek High Power Series 3W High Power UV LED Part No.: QBHP684E-UVXXXYS Series Y: Viewing Angle XXX: UV Wavelength S: 500mA Product: QBHP684E-UVXXXYS_series Date: February 03, 2017 Page 1 of 11 Table
TORX147(F,T) TORX147(F,T) FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE. 1. Absolute Maximum Ratings (Ta = 25 C) 2.
FIBER OPTIC RECEIVING MODULE TORX147(F,T) FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE Unit: mm For JEITA Standard CP 1212 (Digital Audio Optical Interface for Consumer Equipment). A self tapping
Harvatek Surface Mount LED Data Sheet HT-155 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** Aug. 29, 2005 Version of 1.0 Page 1/24 DISCLAIMER...3 PRODUCT SPECIFICATIONS...4 ATTENTION:
FIBER OPTIC TRANSMITTING MODULE TOTX147(F,T)
FIBER OPTIC TRANSMITTING MODULE TOTX147(F,T) FIBER OPTIC TRANSMITTING MODULE FOR DIGITAL AUDIO EQUIPMENT Unit: mm Conforms to JEITA Standard CP 1212 (Digital Audio Optical Interface for Consumer Equipment).
SMD /RSGHBHC1-S01/2T
Features Package in 8mm tape on 7 diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow Solder process Full-color type Pb-free Component solderable
5.0X6.0mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
5.0X6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA5060ZGS/E Green Features Single color. Suitable for all SMT assembly
3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions. Part Number: AA3528SES/J4. Super Bright Orange
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528SES/J4 Super Bright Orange Features Single color. Suitable for all SMT assembly and solder process. Available on tape and reel. Ideal for backlighting.
QT-Brightek Lamp with Housing Series. 5mm Round Lamp with Housing
QT-Brightek Lamp with Housing Series 5mm Round Lamp with Housing Part No.: QBL8XX60D-MP7_series Product: QBL8XX60D-MP7_series Date: June 22, 2016 Page 1 of 10 Table of Contents: Introduction... 3 Electrical
Technical Data Sheet Luminosity Full Color LED
6-23 /R6GHBHC-A/ET eatures Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow
TORX176 TORX176 FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO EQUIPMENT. 1. Maximum Ratings (Ta = 25 C) 2. Recommended Operating Conditions
FIBER OPTIC RECEIVING MODULE TORX176 FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO EQUIPMENT Unit: mm Conform to JEITA Standard CP 1201 (For Digital Audio Interfaces including Fiber Optic inter connections).
Description. The Hyper Red device is based on light emitting diode chip Suitable for all SMT assembly and solder process.
5.0mm x 5.0mm FULL-COLOR SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KAAF-5050RGBS-13 Features Description Chips can be controlled
Square With 5Ф Dome 4 Lead Super Yellow LED Technical Data Sheet. Part No.: LL-U48UY3C-Y2-4D
Square With 5Ф Dome 4 Lead Super Yellow LED Technical Data Sheet Part No.: LL-U48UY3C-Y2-4D Spec No.: BNH116 X85 Rev No.: V.3 Date: Jan./25/26 Page: 1 OF 7 Features: Fewer LEDs required. Low profile. Lowers
3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP. Descriptions. Features. Package Dimensions
3.0x1.0mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APFA3010LSEEZGKQBKC Features 3.0x1.5x1.0mm right angle SMD LED,
LSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.55 mm LED Lamp
LSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.55 mm LED Lamp LSM0603453V Green SMD LED. High intensity light output, low power consumption, low profile and wide viewing angle. Application Wearable
5.0mm x 6.0mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
5.0mm x 6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF5060QBFSURZGS Features Chips can be controlled separately. Suitable
Harvatek Surface Mount LED Data Sheet. HT -264 Series
Harvatek Surface Mount LED Data Sheet HT-264 Series Apr. 11, 2006 Version of 1.0 Page 1/24 DISCLAIMER... 3 PRODUCT SPECIFICATIONS...4 ATTENTION: ELECTROSTATIC DISCHARGE (ESD) PROTECTION...5 LABEL SPECIFICATIONS...6
Descriptions. The Hyper Red source color devices are made with Low power consumption.
T-1 3/4 (5mm) FULL COLOR LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: L-154A4SURKQBDZGW Features Descriptions Uniform light output. The source
CTH Series Capacitive Touch Sensor Display 15.0 x 15.0 x 11.0 mm
TM CTH Series Capacitive Touch Sensor Display 15.0 x 15.0 x 11.0 mm CTHS15CIC05 - Pure Green Capacitive Touch Sensor Through Hole with a Display Size of 0.59 x 0.59 inches (15 x 15 mm) square Applications
TORX177(F,T) TORX177(F,T) TENTATIVE FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE. 1. Maximum Ratings (Ta = 25 C)
TENTATIVE FIBER OPTIC RECEIVING MODULE TORX177(F,T) FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE Unit: mm For JEITA Standard CP- 1212 (Digital Audio Optical Interface for Consumer Equipment).
TLP350F TLP350F. Industrial Inverter Inverter for Air Conditioner IGBT/Power MOSFET Gate Drive IH(Induction Heating) Pin Configuration (top view)
TLP350F Industrial Inverter Inverter for Air Conditioner IGBT/Power MOSFET Gate Drive IH(Induction Heating) TOSHIBA Photocoupler GaAlAs IRED + Photo IC TLP350F The TOSHIBA TLP350F consists of a GaAlAs
CTH Series Capacitive Touch Sensor Display 15.0 x 15.0 x 11.0 mm
TM CTH Series Capacitive Touch Sensor Display 15.0 x 15.0 x 11.0 mm CTHS15CIC05 - Pure Green Capacitive Touch Sensor Through Hole with a Display Size of 0.59 x 0.59 inches (15 x 15 mm) square Applications
SPEC NO: DSAE5924 REV NO: V.9B DATE: DEC/03/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.0mmx1.5mm SMD CHIP LED LAMP Part Number: APL3015SGC-F01 Super Bright Green Features 3.0mmx1.5mm SMT LED, 1.4mm thickness. Low power consumption. Ideal for backlight and indicator. Various colors and
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height)
Technical Data Sheet 0603 Package Chip LED (0.8 mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
Technical Data Sheet 0603 Package chip LED(0.4mm Height)
Technical Data Sheet 0603 Package chip LED(0.4mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
TORX178B TORX178B FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE. 1. Maximum Ratings (Ta = 25 C) FIBER OPTIC RECEIVING MODULE
FIBER OPTIC RECEIVING MODULE TORX178B FIBER OPTIC RECEIVING MODULE FOR DIGITAL AUDIO INTERFACE Unit: mm Conforms to EIAJ Standard CP 1201 (For Digital Audio Interface including Fiber Optic inter connections).
HSMF-C127. Data Sheet. Tri-Color Side-View ChipLED. Features. Description. Applications
Data Sheet HSMF-C127 Description The HSMF-C127 is a side-emitting tri-color RGB LED chipled. This surface-mount chipled is available in 3.2-mm 1.5-mm footprint. Its wide viewing angle allows good color
Harvatek Surface Mount CHIP LED Data Sheet
Harvatek Surface Mount CHIP LED Data Sheet HT Part No. 07/17/2013 Version 1.0 Page 1/15 DISCLAIMER... 3 PRODUCT SPECIFICATIONS... 4 ATTENTION: ELECTROSTATIC DISCHARGE (ESD) PROTECTION... 4 LABEL SPECIFICATIONS...
Description. Kingbright
10.2mm (0.4INCH) THREE DIGIT NUMERIC DISPLAY Part Number: BC04-11SEKWA Super Bright Orange Features 0.4 inch digit height. Low current operation. Excellent character appearance. Easy mounting on P.C. boards
Luckylight. 5mm Round With Flange Type. White LED. Technical Data Sheet. Part No.: 584WC2C-W5-1PC-P
5mm Round With Flange Type White LED Technical Data Sheet Part No.: 584WC2C-W5-1PC-P Spec No.: B52A X265 Rev No.: V.3 Date: Aug./5/27 Page: 1 OF 9 Features: Popular T-1 3/4 diameter package. Bulk,Available
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet TOP View LEDs Features P-LCC-2 package. White package. Optical indicator. Colorless clear window. Wide viewing angle. Suitable for vapor-phase reflow, Infrared reflow and wave solder
Chip LEDs with Bi-Color(Multi-Color)
Features: Package in 8 mm tape on 7 diameter reel. Compatible with automatic equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Description: The 19-22 SMD Taping
TD62M8600FG TD62M8600FG 8CH LOW SATURATION VOLTAGE SOURCE DRIVER FEATURES SCHEMATICS PIN CONNECTION (TOP VIEW)
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT MULTI CHIP TD62M8600FG TD62M8600FG 8CH LOW SATURATION VOLTAGE SOURCE DRIVER TD62M8600FG is Multi Chip IC incorporates 8 low saturation discrete transistors equipped
SPEC NO: DSAH3956 REV NO: V.7 DATE: NOV/26/2008 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:
3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: AA3529SES/L Hyper Orange Features Single color. Suitable for all SMT assembly and solder process. Available on tape and reel. Ideal for backlighting.
3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KA-3528ZGS Green Features Single color. Suitable for all SMT assembly
5mm Round Standard T-1 3/4 With Flange Type White LED Technical Data Sheet. Part No.: LL-504WC2E-W2-3TC
5mm Round Standard T-1 3/4 With Flange Type White LED Technical Data Sheet Part No.: LL-54WC2E-W2-3TC Spec No.:B58 X335 Rev No.: V.2 Date: Jun/16/26 Page: 1 OF 8 Features: Popular T-1 3/4 diameter package.
SPEC NO: DSAD1051 REV NO: V.14B DATE: APR/07/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.2x1.6mm SMD CHIP LED LAMP Part Number: APTD3216SGC Super Bright Green Features 3.2mmX1.6mm SMT LED, 1.8mm thickness. Low power consumption. Ideal for backlight and indicator. Package: 2000pcs / reel.
3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KAA-3528BRGS-08 Features Suitable for all SMT assembly and solder process.
SPEC NO: DSAF1085 REV NO: V.8A DATE: FEB/04/2015 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.2x2.4mm SMD CHIP LED LAMP Part Number: APD3224SECK-F01 Super Bright Orange Features 3.2x2.4mm SMT LED, 2.4mm thickness. Low power consumption. Ideal for backlight and indicator. Package : 1500pcs / reel.
3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528SRS Super Bright Red Features Single color. Suitable for all SMT assembly and solder process. Available on tape and reel. Ideal for backlighting. Package
Inolux Surface Mount High Power Ultraviolet LED IN-3531SCUV
Inolux Surface Mount High Power Ultraviolet LED Official Product Product: Data Sheet No. Tentative Product **************** Sept. 5, 2016 Version of 1.3 Page 1/13 DISCLAIMER... 3 LABEL SPECIFICATIONS...
3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAA3528SURKZGQBDS Features Suitable for all SMT assembly and solder process.
TD62382AP,TD62382AF TD62382AP/AF 8CH LOW INPUT ACTIVE SINK DRIVER FEATURES PIN CONNECTION (TOP VIEW) SCHEMATICS (EACH DRIVER)
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62382AP,TD62382AF TD62382AP/AF 8CH LOW INPUT ACTIVE SINK DRIVER The TD62382AP / AF are non inverting transistor array which are comprised
3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP. Features. Description. Package Dimensions. Part Number: APA3010SRCPRV-GX.
3.0mmx1.0 mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APA3010SRCPRV-GX Super Bright Red Features 3.0mmx2.0mmx1.0mm right angle SMD LED, 1.0mm thickness. Low power consumption. Wide viewing angle. Ideal
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SGU04FU IN A GND
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7SGU04FU Inverter (Unbuffered) Features High output current : ±8 ma (min) at = 3 Super high speed operation : t pd = 1.9 ns (typ.) at = 3.3,
Inolux Surface Mount High Power Ultraviolet LED IN-3531ACUV
Inolux Surface Mount High Power Ultraviolet LED Official Product Product: Data Sheet No. Tentative Product **************** Aug. 21, 2015 Version of 1.1 Page 1/13 DISCLAIMER... 3 LABEL SPECIFICATIONS...
SPEC NO: DSAB1874 REV NO: V.20A DATE: AUG/26/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
1.6X0.8mm SMD CHIP LED LAMP Part Number: KPT-1608SECK Super Bright Orange Features 1.6mmX0.8mm SMT LED, 0.75mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Various
SPEC NO: DSAB4968 REV NO: V.17A DATE: OCT/24/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED:
3.2x1.6mm SMD CHIP LED LAMP Part Number: KP-3216SRC-PRV Super Bright Red Features 3.2mmx1.6mm SMT LED, 1.1mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Various
2.2x1.4mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
2.2x1.4mm SURFACE MOUNT LED LAMP Part Number: KA-2214SESK Super Bright Orange Features 2.2mm x 1.4mm, 1.3mm high. Low power consumption. Available on tape and reel. Package : 2000pcs / reel. Moisture sensitivity
3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF3529LSEEZGKQBKS Features Outstanding material efficiency. Low power
Features. General Description. Applications. Typical Application. QX5252 Solar LED Driver
General Description QX5252 is an ASIC for solar LED lawn lights. Only a peripheral inductor is required to realize the step-up power supply, and the maximum drive efficiency can exceed 84%. QX5252 has
TD62384APG,TD62384AFG TD62385APG,TD62385AFG
TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC TD62384APG,TD62384AFG TD62385APG,TD62385AFG 8CH LOW INPUT ACTIVE DARLINGTON SINK DRIVER The TD62384APG / AFG and TD62385APG / AFG are non inverting
3.5x2.8mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KAA-3528RGBS-11 Features Suitable for all SMT assembly and solder process.
Description. Kingbright
8mm (0.32INCH) SINGLE DIGIT NUMERIC DIS- PLAY Part Number: SC32-11GWA Green Features 0.32 inch digit height. Low current operation. Excellent character appearance. High light output. Easy mounting on P.C.
SPEC NO: DSAE9407 REV NO: V.6B DATE: JAN/19/2015 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:
T-1 3/4 (5mm) ROUND LED LAMP Part Number: WP7143SGC Super Bright Green Features Outstanding material efficiency. Reliable and rugged. Low current capability. RoHS compliant. Description The Super Bright
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet Right Angle Lens Chip LEDs with Bi-Color(Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor
27-21/Y2C-AP1Q2L/3C SMD B
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. The product itself
Description. Kingbright
2.1x0.6mm RIGHT ANGLE SURFACE LED LAMP Part Number: Super Bright Orange Features Description 2.1x1.0x0.6mm right angle SMD LED, 0.6mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight