Tool Changers and Collision Protection Automatic changers for robot and manual handling systems Integrated connections for media and power supply

Transcription

1 The Modular Gripper System Offers Perfect solutions for press automation and robot handling Standard components for designing complex gripper systems 4 octagonal profile sizes for weight optimized design of the structure Optimized 8-point cross section for the loads occurring with a 6-axis robot Low weight with high rigidity to reduce the load on the gripper system and robot Anodized surface for protection against environmental influence Produced using high tensile strength aluminium Special designed elements treat a combination with CPI-Systems Octagonal Profiles The octagonal profiles offer maximum rigidity with low weight. The profiles are optimized for loads from bending and twisting for high speed and complex motion sequences of a 6-axis robot. Gripper System Complete Systems and Components from one Company Service for Our Customers Our engineers define the custom solution for your gripper and handling problems together with your specialists On the basis of your part and system data, we supply a complete system ready for operation (mechanical, pneumatic, electronic stages) Support Profiles For maximum rigidity at low weight Connection Elements Cross connectors with adjustable angles T profile connectors for space-saving basic structures Connection elements with bolt joint Tool Changers and Collision Protection Automatic changers for robot and manual handling systems Integrated connections for media and power supply Complete Vacuum Line offers the entire range of "pneumatics from one company" from vacuum generation right down to the comprehensive line of suction elements. Elements for Gripping, Clamping, Positioning Open and closed grippers Lightweight clamps Pin package cylinders Parallel and 3-jaw grippers Comprehensive Accessories Groove blocks, sensor mounts, cable protection ducts and much more to complete your application. Vacuum Components Suction element Vacuum generators Vacuum sensors 1.0

2 Basic Support Weight optimized components in 3 sizes for simple and uncomplicated design of basic structures. The base support allows direct connection of all standard robot couplings. Profile Conectors Clamp on all sides of the channel for maximum rigidity. The interlocking, non-positive connection of the profiles ensures permanent stiff connection even at high loads. Closed Grippers and Clamps for High Service Life and Maximum Service Economy The closed grippers and clamps provide protection against contamination. The mechanical interlock ensures maximum safety even in the event of a pressure failure. The modular design offers all possibilities for customer specific part mounts. Exact Positioning Aid The positioning and measuring aid allows quick reconstruction of the system following a crash. Special grooved blocks are inserted and arrested in the channel grooves for definition of measuring points. This ensures that the components can be readjusted to their original position at any time. 1.1

3 Robot Feed to Press Combination of mechanical grippers and suction elements for high motion rates Motor Vehicle Assembly Handling Exact component positions with fixed and removable indexing pins 1.2

4 Discharge Gripper for Wood Processing Machine High application variability through the use of automatically adjustable suction points Transport Gripper for Automotive Production Pickup of multiple-piece body assemblies with heavy-duty clamps and indexing pins Stabilization of assembly for proper transport Simple and forced saving handling through the use of identical center of gravity position 1.3

5 Notes 1.4

6 Octogon Extrusion Page 1.6 Bodybuilder Bayonet Page 1.8 Contents Base supports Page 1.9 Mid mounts, Flange clamps Page 1.13 Angle connectors, Transition Brackets, Page 1.16 Swivel-Arms T-connectors, cross boom adaptor Page 1.21 Profile clamps Page 1.23 Profile Connector Page 1.24 Connectors for Grippers and Clamps Page 1.25 Accessories Page

7 Octogonal Support Profile 90-mm-Profile Technical data Weight g/m Geometric moment of inertia l x 165,20 cm ,5 5,5 7,8 Geometric moment of inertia l y 165,20 cm 4 Torsional moment of inertia I T 330,50 cm 4 90 Laying out basic structures for large and wide extending components Order Information: B mm-Profile Profile length ordering in mm Technical data Weight g/m Geometric moment of inertia l x cm 4 Geometric moment of inertia l y cm 4 Torsional moment of inertia I T 77.5 cm 4 Order Information: All areas of application requiring high rigidity and low weight B-60-2 Profile length ordering in mm 1.6

8 Octogonal Support Profile 45-mm-Profile Technical data Weight g/m Geometric moment of inertia l x 11,89 cm 4 Geometric moment of inertia l y 11,89 cm 4 Torsional moment of inertia I T 23,78 cm 4 Order Information: B-45-1 Profile length ordering in mm Universal application, e.g. Small and medium basic structures Overhang beam Attachment for grippers and clamps Reinforcement 30-mm-Profile Technical data 12 Weight g/m 6,5 Geometric moment of inertia l x 2,427 cm 4 ø8 5,5 7,5 Geometric moment of inertia l y 3,640 cm 4 Torsional moment of inertia I T 6,067 cm 4 30 Order Information: B-30-1 Profile length ordering in mm Universal application, e.g. Attachment for grippers and suction element Small basic structures Reinforcement 1.7

9 Bayonet Bayonet High Torque Series 60 Round and 60 Octogon Product features: Manufactured in high strength aluminum manual quick change system allows simple change of a endeffector Can be completed with electrical connector maintenance-free system Assembling of 60mm Octogon-Profile (no machining neccessary) Applications: Assembling of Booms at robot systems Quick manual change of different endeffector-systems For high torsion load CPI-numbering-code: CPI-RDC-60-BB-2 Application Example Retainer Key M8 Fasteners 64.8 Diameter Diameter Order-Numbers: Order no. CPI-numbering code Specification Weight [kg] MET CPI-RDC-60-BB-2 Bayonet BB 60mm HI-TQ 2,1 1.8

10 Product Features Allows simple layout of basic structures Produced using high tensile strength cast aluminum FEM-optimized structure for maximum rigidity at low weight 3 sizes combined with 2 channel sizes ensures weight optimized layout Base Supports The base support BM1, BM2 and BM3 can be used as standard elements between the gripper systems and robot interface. Additional adaptors allow conection to standardized robot flanges Base Support BM2 Standard Hole Pattern for Base Supports 6x60 = ø Features 6 x M10 thread Hole circle dia. 125 mm 2 pin holes 10H7 30 ø10h7 (2x) M10 (6x) Direct connection of robot flanges (125 mm ISO flange) Connection of manual or automatic changeable attachments Adaptors available on request BM1: Position as indicated BM2/3: Hole pattern turned 90 counterclockwise Holes are trough-holes 1.9

11 Base Supports BM1 Product Features High tensile strength aluminum material Slender, weight-optimized design Machined center hole for special adapter-flanges Modular design Design of straight basic structures for small and medium-size gripper systems and components. The components are not subjected to any strong distortion. Base Support BM1-60 Application of Base Support BM1-60 Adaptors available on request P1 Profilgröße B A 15 Order Information: Size (90, 60) BM1 - Type A B P1 Weight [g] BM ,5 105, BM

12 Product Features High tensile strength aluminum material Slender, weight-optimized design Triple clamping per profile for high stability Machined center hole for special adapter-flanges Modular design Base Supports BM2/BM3 Design of H-shaped basic structure for medium size and large gripper systems and components. Base Support BM2-60 Application of Base Support BM2-60 Adaptors available on request 100 D C F P1 Profilgröße A E B Type A B C D E F P1 Weight [kg] Order Information: BM ,5 130, ,48 BM ,26 BM ,5 130, ,50 BM ,28 Version (2/3) Size (90, 60) BM

13 Mid Mount Assembly Mid Mount heavy duty design Product features: For simple building of base structures Manufactured in high strength aluminum Mounting pattern can be machined to customer specification Modular design Brackets can be rotated in 90 increments Applications: Direct application to robot flanges Asembling of manual or automatic tool changer Endeffector systems with high mechanical load Endeffector system with high torsional load BM1-60-DE CPI-numbering-code: CPI-BM CS Configuration: SE = Single Extrusion DE = Double Extrusion BM1-60-SE CS = Plate without mounting plattern Manufacturing of individual hole patterns on demand M10 Bolts Calibration Hole 6 mm Profile center Profile center Order no. CPI-numbering code Specification Weight [kg] MET CPI-BM1-60-SE-CS 60 mm Mid Mount Assembly, Single Extrusion 5,2 MET CPI-BM1-60-DE-CS 60 mm Mid Mount Assembly, Double Extrusion 5,2 1.12

14 Single base mount for octogon profile 60 or 90 Product features: Manufactured in high strength aluminum Octogon profile prevents from torsional movement Weight optimized design Mid Mount Applications: Small endeffector systems with high load Assembling to robot with adaptor flange Profile Size E Bolts M10 M10 (6x) Bolt circle 125 mm Profile axis 10mm dowel (2x) CPI-numbering-code: CPI-ATI HD - Typ A B C D E ATI HD ,4 152,4 41,9 87,7 60 ATI HD BB = 60mm profile 90 BB = 90mm profile Order-Numbers: Order no. CPI-numbering code Specification Weight [kg] MET CPI-ATI HD-60BB Base Mount 60mm Octogon 3,1 MET CPI-ATI HD-90BB Base Mount 90mm Octogon 2,9 1.13

15 Flange Clamp Base mount clamp for octogon profile 60 Product features: Manufactured in high strength aluminum Octogon profile prevents from torsional movement Calibration holes ensure exact positioning of a disassembled profile Key connector in flange for exact positioning Applications: Small endeffector systems Assembling to robot with adaptor flange 90 -assembling to robot Calibration holes Keyway 6,35 (2 x) Keyway 6,35 (2 x) 3,3 60 mm Extrusion Holes for M10 bolts Key dimensioning CPI-numbering-code: Base- CPI-TBC Order-Numbers: Order no. CPI-numbering code Specification Weight [kg] MET CPI-TBC Flange Clamp Base Mount Octogon 60mm 1,1 1.14

16 Flange clamp for octogon profile 60 Product features: Manufactured in high strength aluminum Octogon profile prevents torsional movement Calibration holes ensure exact positioning of a disassembled profile Key connector in flange for exact positioning Flange Clamp Applications: Small endeffector systems Assembling to robot with adaptor flange Keyway 6,35 (2 x) Keyway 6,35 (2 x) 3,3 Calibration holes Holes for M10 bolts 60 mm Extrusion Key dimensioning CPI-numbering-code: Base- CPI-BECC Order-Numbers: Order no. CPI-numbering code Specification Weight [kg] MET CPI-BECC Boom End Clamp Flange Mount Octogon 60mm 1,3 1.15

17 Fixed Angle Connectors Product Features Interlocking connectors High rigidity through use of specially screwed intermediate plate (in comparison to WV- - ) FEM-optimized cross sections for minimum weight and maximum rigidity Two-piece clamps allow subsequent installation Precision channel clamping on 3 surfaces Fixed 90 channel axes angle Connecting 2 profile of same or different size for construction of extremely rigid basic structures. The longitudinal Profile axes are offset vertically by dimension "A". According to difference in Dimension "A" in comparsion with WV- - (Page 1.17) an interchange has to be checked in every case. Order Informationen: WF - - Fixed Angle Connector Application for Fixed Angle Connector Profile 1 (90, 60) Profile 2 (90, 60) profile size P1 F E B2 A B B1 G øc D P2 profile size Type P1 P2 A B B1 B2 ØC D E F G Weight [g] WF WF ,5 196, WF

18 Product Features Interlocking connectors FEM optimized cross sections for minimum weight and maximum rigidity Two-piece clamps allow subsequent installation Precision channel clamping on 3 surfaces Angle adjustable in 22.5 grid Angle Connectors Connection of 2 profiles of equal or different size for laying out structures. The longitudinal channel axes are offset vertically by dimension "A". According to difference in Dimension "A" in comparsion with WF- - (Page 1.16) an interchange has to be checked in every case. Order Informationen: WV - - Profile 1 (90, 60, 45, 30) Profile 2 (90, 60, 45, 30) Angle Connector Application Angle Connector profile size P1 F E B2 B A B1 G øc D P2 profile size Type P1 P2 A B B1 B2 ØC D E F G Weight [g] WV WV ,5 188, WV , , WV WV WV , , WV ,5 129, WV ,5 29, WV , , WV

19 Insulated Angle Connectors Connecting 2 channels of same or different size with the possibility of attaching the second profile so that it is insulated and can be pivoted infinitely. Product Features FEM optimized cross sections for minimum weight and maximum rigidity Two-piece clamps allows subsequent installation Precision profile clamping on 3 surfaces Profile 2 can be pivoted infinitely 360 Profile 1 and 2 electrically insulated by high tensile strength insulating sleeve Order Informationen: WI - - Insulated Angle Connector Application for Angle Connector Profile 1 (90, 60, 45, 30) Profile 2 (30) D øc E B A B1 profile size P1 B2 G F P2 profile size Type P1 P2 A B B1 B2 ØC D E F G Weight [g] WI ,6 950 WI ,5 132, ,6 820 WI , , ,6 620 WI ,

20 Swivel arms 30mm octogon profile Product features: Manufactured in high strength aluminum Many variations available Can be used with 30 mm octogon Adjustable in 3 axes with 360 stepless maintenance-free system Preventing from rotation with a toothed disk Swivel Arms Applications: Assembling of venturies, vacuum-cups to the endeffector CPI- -30-SA CPI-numbering-code: Lenght CPI - - -SA Dimensions for CPI- -30-SA 400 (100 mm), 500 (125 mm) 600 (150 mm), 700 (175 mm) 800 (200 mm), 30 for Octogon 30 Profile Length Example shows adjustability Ø 19 Length mm Order-Numbers: Order no. CPI-numbering code Specification Weight [g] MET CPI SA Swivel Arm 100mm For 30mm Octogon 320 MET CPI SA Swivel Arm 125mm For 30mm Octogon 350 MET CPI SA Swivel Arm 150mm For 30mm Octogon 380 MET CPI SA Swivel Arm 175mm For 30mm Octogon 435 MET CPI SA Swivel Arm 200mm For 30mm Octogon

21 Transition Bracket, Heavy Duty Design Transition bracket assembly, heavy duty Product features: Two flange clamps are mounted Clamps can be mounted in 90 increments Calibration holes ensure exact positioning of a disassembled profile Key connector in flange for exact positioning Designed for high load Applications: For systems with high load and a high stiffnes For Octogon profile 60 mm 60mm profile (Octogon) 60mm profile (Octogon) Calibration holes 6mm Distance between profile axes CPI-numbering-code: Base- CPI-TBC profile profile 60 Order-Numbers: Order no. CPI-numbering code Specification Weight [kg] MET CPI-TBC Clamp Adapter Assembly Metric 2,1 1.20

22 Heayy Duty Cross Boom Adapter Product features: Manufactured in high strength aluminum Positioning of both single clamps with key Heavy Duty Cross Boom Adapter Applications: T-Connecting of two tubes in one layer (Octogon) CPI-numbering-code: CPI-BECC - - Profile 2 Tube (Octogon) Profile 1 (60 = Octogon) Profile 2 (60 = Octogon) Bolts Tube (Octogon) Profile 1 Order-Numbers: Order no. CPI-numbering code Specification Weight [kg] MET CPI-BECC Heavy Duty Cross Boom Adapter Metric Octogon 60 2,3 1.21

23 A B E T-Connectors Product Features Interlocking connectors Slender design Precision Profile clamping on 3 surfaces 4-point internal clamping for maximum reliability against loosening Simple installation FEM-optimized cross-section for minimum weight and maximum rigidity Two-piece clamps allow subsequent installation Angle adjustable in 22.5 grid for TV-90- Connection of 2 profiles with same or different size for construction of flat structures. The longitudinal profile axes of the channels to be connected are located in one plane. T-Connector TV T-Connector TV-60/45- Order Informationen: TV - - Profile P1 (90, 60, 45) Profile P2 (90, 60, 45, 30) Application for T-Connector Drawing shows axial connection of TV-90- TV-60/45- G profile size P2 profile size F P1 connector Anschluß to an profile Profilsize øc ød connector to profile size Type P1 P2 A B ØC ØD E F G Weight [g] TV TV ,5 97, TV , TV TV-60/ / TV-60/ / TV-60/ /

24 Product Features FEM optimized cross sections for minimum weight and maximum rigidity Two-piece clamps allows subsequent installation Precision profile clamping on 3 surfaces Present hole pattern (4 x M8 thread + 2 x 6 mm dowel hole) Profile Clamps Basic element for customer-specific expansions or attachment of auxiliary components such as valves, switch boxes, etc. Order Informationen: WV - Profile P1 (90, 60, 45, 30) profile Clamp H ±0,02 Abstand Stiftlöcher L K ±0,2 P1 E A M1 J1 B ±0,2 profile size D M øj Type P1 A B D E H J J1 K L M M1 Weight Remarks [±0,02] [H7] [±0,2] [±0,2] [g] WV M WV ,5 75, M WV , M WV M WV-30-D Ø 8, with through holes WI , M with insulation 1.23

25 CPI Profile Connector CPI Profile Connector Features Connection to 30-mm channel with special anchor supply 19-mm pin connection Simple assessment possibility with 1 center screw BC-19 Channel Connector Connecting CPI components with 19-mm standard pins such as vacuum nozzles and suction element holders, etc. to 30-mm octagonal profile. Order Information: Base- BC , ,

26 Right Angle Ball Connectors Features Adjustable ball joint can be adjusted 20 in all directions Can be rotated 360 around channel axis Insulated connection to channel Designed damage management* prevents damage to structure Connectors for Grippers and Clamps Connection of gripper, pneumatic clamp or vacuum suction element to a gripper system. The ball provides for 20 motion in all directions In addition, the elements can be rotated 360 around the channel axis. Right-Angle Ball Connector * Damage Management In the event of heavy or unfavorable loads, the ball neck brakes preventing further damage to the main structure. Application for Right-Angle Ball Connector Order Information: BJ-30 - Adapter ball (option) see pages 1.27 and 1.28 Order no. Specification BJ-30-84G32 BJ-30-84A32 BJ-30-82L25 Information about use of see details BJ-30-82L32 of ball-connectors BJ-30-82L40 page 1.27 and 1.28 BJ-30-STD BJ-30-OB BJ-30-VAC 54, ± See Table on Page 1.28 for missing dimensions and weights

27 Front Ball Connectors Front Ball Connectors Features Ball joint adjustable 20 in all directions Connection to 30-mm channel with special expanding anchors FEM optimized structure Intelligent damage management* prevents damage to structure Connection of gripper, pneumatic clamp or vacuum section element to a gripper system. Low weight and slender interfering contours are the focal point. The ball provides for 20 motion in all directions. Front Ball Connector * Damage Management In the event of heavy or unfavorable loads, the ball neck brakes preventing further damage to the main structure. Order no. Specification BT-30-84G32 BT-30-84A32 BT-30-82L25 Information about use of see details BT-30-82L32 of ball-connectors BT-30-82L40 page 1.27 and 1.28 BT-30-STD BT-30-OB BT-30-VAC Order Information: BT-30 - Adapter ball (option) see pages 1.27 und ± Messingdübel Brass anchors zur for Montage frontal assembling an B stirnseitig to B-30-1 (2x) included in im delivery Lieferumfang enthalten See Table on Page 1.28 for missing dimensions and weights 1.26

28 Ball adapter D2 D1 L3 Ball Adapters Order number single part: 8LD Ball connection for closed gripper 84G3-1 Option number for connector BJ or BT: 84G32 L D Order number single part: 8LD Ball connection for cam clamping gripper 84A3-1 Option number for connector BJ or BT 84A32 D1 D2 L3 B1 B2 L2 L1 Order number single part: 82L25 8LD L32 8LD L40 8LD Ball connection for light-weight clamp 82L Option number for connector BJ or BT: 82L25 82L32 82L

29 Ball Adapters Ball adapters D2 L3 D4 D5 45 D3 D1 Ball connection for standard adapter (STD) or customer-specific connections (OB) Option number for connector BJ or BT: STD OB Order no. single part: 8LD for connector STD 8LD for connector OB (no holes) L D6 D6 Ball connection for vacuum suction element Option number for connector BJ or BT: VAC Order number single part: 8LZ Options number B1 B2 ØD1 ØD2 ØD3 ØD4 ØD5 D6 L1 L2 L3 BJ connector: BT connector: Order number (H7) Weight [g] Weight [g] ball adapters single part 82L , LD L , LD L , LD A32 6, LD G32 6, LD OB LD STD M LD VAC G1/ LZ

30 Shimmable angle connections for clamps Features Sturdy construction for supporting high forces Two-separate shimmable planes Clamp can be pivoted by +/- 11 in 2 planes Vertical axis infinitely pivotable 360 Insulate connection Shimmable Angle connections for Clamps Sturdy connection for light-weight clamps. Separate shimmable planes for optimum positioning Order Information: BS-30 - Connector for light-weight clamps 82L50 82L40 82L32 Shimmable Angle Connector for Clamps Application for Angle Connector ø10 H7 22,5 ø10h7 22,5 46 L2 D4 L1 L B6 B5 D , Type B5 B6 D3 D4 L1 L2 L3 L11 Weight (H7) [g] BS-30-82L , , BS-30-82L , BS-30-82L , ,

31 Shimmable Angle Connector for Pin Packages Shimmable angle connector for pin packages Features Sturdy construction for supporting high forces Two-separate shimmable planes Pin package cylinder can be pivoted +/-11 in 2 planes Vertical axis infinitely pivotable 360 Insulate connection Shimmable Angle connection for Pin Package Cylinders Sturdy connection for pin packaging cylinders with separate shimmable planes for optimum positioning Order Information: BS-30 - Connector for pin package cylinder Application for Angle Connector 86P4/P6 86P3 ø10 H7 22,5 ø10 H7 22, L B5 B6 B7 D3 ØD2 32,5 41 L3 D4 L12 L B7 L2 L1 Type B5 B6 B7 D2 D3 D4 L1 L2 L3 L8 L11 L12 Weight (H7) (+0,1) [g] BS-30-86P40P , , BS-30-86P ,

32 Shimmable angle connector for pin Features Sturdy construction for supporting high forces Two-separate shimmable planes Centering pins can be pivoted +/-11 in 2 planes Vertical axis infinitely pivotable 360 Insulate connection Shimmable Angle Connector for Pin Sturdy connection for centring pins with separate shimmable planes for optimum positioning Order Information: BS-30 - Shimmable Angle connection for Pins Connector for centering pins PIN1 PIN2 Application for Angle Connector ø10h7 22,5 ø10h7 22, D , , Type D2 Weight [g] (H7) BS-30-PIN BS-30-PIN

33 Rear Swivel Gripper Mount Rear swivel gripper mount Product features: Adjustability of ball 30 Rear gripper mount Mount for Octogon 30 Slide protected mount Applications: Mounting and adjusting of grippers at endeffector systems Mounting of gripper types 84A and 84G Picture shows CPI-RJM BBS Picture shows CPI-RJM-84G-30BBS Gripper mount Bolt diameter Fastener Swivel CPI-numbering-code: CPI-RJM - - Part Number A B C D CPI-RJM BBS M6 x 1.0 M8 x 1.25 CPI-RJM-84G-30BBS M6 x 1.0 M8 x 1.25 Gripper type (GR15, 84G) Profile (30BBs = Octogon 30) Order-Numbers: Order no. CPI-numbering code Specification Weight [g] MET CPI-RJM BBS Gripper Mount Rear For Octagon 30 mm 420 MET CPI-RJM-84G-30BBS Gripper Mount 84G3 Rear For Octagon 30 mm

34 Side Swivel Gripper Mount for Round Housing Side swivel gripper mount for round housing Product features: Adjustability of ball 30 Sphere retainer system Mount for Round Octogon 30 Slide protected mount CPI-numbering-code: Applications: Mounting and adjusting of grippers at endeffector systems Mounting of gripper types GR1-150 CPI-GPC - - S Application example (with round bar) Gripper type (150) Profile (30BBS = Octogon 30) Part Number A B C D E F CPI-GPC BBS Diameter Diameter for Gripper mount Order-Numbers: Order no. CPI-numbering code Specification Weight [g] MET CPI-GPC BBS 30 mm Octogon Grip. Parallel Clamp Spherical

35 Accessories, Sensor-Brackets Order Information: BB-IS Indexing Pin Application: For positioning and arresting channel connectors with associated index groove blocks during assembly. Order Information: NU-1 Index Screw Block Application: Definition of index points (without damaging channel by drilling) for quick relocation of assembly positions following repair. The index groove blocks can be inserted from the side into the T grooves in the channel and arrested with the aid of indexing pins. 2 pin screws arrest the position. Order Information: NU-2 G = Thread M5 NU-3 G = Thread M6 Groove Block Application: Mounting element for additional screw connections if required. The groove blocks can be entered into the T groove from the side. Order Information: NU-4 G = Thread M4 NU-5 G = Thread M5 Groove Block, for Inserting from Front Application: Mounting element for additional screw connections if required. This groove block can be inserted into the T groove from the front and stabilized by turning. 1.34

36 Accessories, Sensor-Brackets Sensor Bracket SH Application: Installation of inductive proximity switches for checking components. Order no. SH-1 SH-2 Sensor version for sensors with M12 thread for sensors with M18 thread Cable Ducts Cable Duct LLK Order no. H W LLK Application: Protection of cables and media lines from mechanical and thermal damage (e.g. weld spatter). The LED and LES end protection rings avoid chafing edges and reliably hold the cover tight. Cable Duct LLK-40.xxx Order no. H W LLK LLK Order Information: LED End Protection Cover LES End Protection Ring Order no. Designation (H x W) Dimension (H x W) Material Supply length Specification LLK LS-miniature duct 26 x 30 Steel 2 m LLK LS-duct 40 x 40 Steel 2 m LLK LS-duct 40 x 60 Steel 2 m LED End protection cover 26 x 30 Plastic for LKK LES End protection ring 40 x 40 Plastic for LKK LES End protection ring 40 x 60 Plastic for LKK