Characteristics. High impact with draw wire (ICTA 3422) Use. Accessories for conduits (p. 754)

Size: px

Start display at page:

Download "Characteristics. High impact with draw wire (ICTA 3422) Use. Accessories for conduits (p. 754)"

Brandon Anthony
5 years ago
Views:

1 flexible conduits flexible conduits Characteristics Flame-retardant Conform to standard: EN and IEC Crush resistance: 70 Newtons Supplied wrapped in film, the coil acts as a pay-out reel The various diameters are identified by coloured ties Surface-mounting or flush-mounting Pre-lubricated for easier cable insertion Pack Cat.Nos Medium impact (ICA 21) Shock resistance: 2 joules at - C Min operating t : - C Max operating t : + 60 C Flush-mounted in certain cases before construction of the masonry Ø exterior Ø interior thickness High impact with draw wire (ICTA 22) Shock resistance: 6 joules at - C Min operating t : - C Max operating t : + 90 C IK 08 Surface mounting not recommended outside Suitable for prefabricated concrete Ø exterior Ø interior thickness Accessories for conduits (p. 7) Wire cross- Occupation cross- Number of external Ø of ducts to be used section in mm 2 section in mm 2 Conductor* Flexible* Rigid* * Based on H 07 V - U/R Use Surface-mounted or flush-mounted for electrical installations in residential buildings (NF C 1-100) Exterior Interior Rigid Reinforced Flexible reinforced flexible and rigid Surfacemounted Flushmounted Before Walls construction Floors After construction Possible Not recommended Prohibited Reinforced flexible conduit with wire puller: flexible annular, suitable for prefabricated concrete Annular flexible conduit: flexible, without wire puller Rigid conduit with integrated sleeves: rigid, smooth, without wire puller 71

2 flush-mounting boxes for dry partitions Pack Cat.Nos 1-gang boxes For 1 module Drilling diameter 2 mm Depth 0 mm For 1 gang or 2 modules For wiring accessories using screws or claws Drilling diameter 67 mm Depth 0 mm Depth 0 mm Depth 60 mm Multi-gang boxes For mounting equipment using screws Drilling diameter 67 mm Supplied with removable dividers for accommodating extended functions For 8. mm fixing centres Compatible with: Arteor, Céliane and Depth 0 Depth 0 Mosaic ranges modules horizontal mounting For 7 mm fixing centres Compatible with: Céliane and Mosaic ranges gang, modules vertical or horizontal mounting gang, 6 modules vertical or horizontal mounting For 60 and Compatible with: Arteor, Galea Life, Céliane, Mosaic, Valena, Suno and Cariva gang or / modules gang or 6/8 modules gang or 8/10 modules Pack Cat.Nos Tools for flush-mounting boxes Installation gauge For easy marking and cutting out of plasterboard in multi-gang configuration from an existing hole Integrated bubble level Hole cutter Supplied with centring drill Bi-metallic hole cutter Equipped with an extractor spring 67 mm 1 to -gang boxes For use in the following materials: plasterboard, wood, fibreboard, stainless steel reinforced life M HSS teeth Pilot drill with carbide tip Keyhole cutter For use in plasterboard Equipped with an 8 mm long, 0.9 mm thick removable blade, used for cutting out positions for mounting multi-gang boxes Supplied with 2 interchangeable blades Universal covers For converting wiring devices boxes into junction boxes or for closing up an existing box Supplied with fixing screws For one-gang or multi-gang boxes Round cover, 8 mm, Square cover, 80 x 80 mm, Cover for Batibox 2-gang box, Accessory Long screw mm length 0 mm for all Batibox boxes Divider for multi-gang boxes For installation in Batibox flush-mounting boxes Used for wiring devices with fixing screws in horizontal position For 0 mm deep boxes For 0 mm deep boxes Flush-mounting boxes for Vela range (p. 720) 72

flush-mounting boxes for dry partitions (continued) flush-mounting boxes for dry partitions Installation 1 89 6 892 example of

Nos Boxes with cover for luminaires For ceiling rose unit 0 89 6 67 mm - depth 0 mm Supplied with hook Equipped with inputs 16-20

rose units 10 892 Anchoring device Quick installation by self-locking system Supplied with 2 m long steel cable Used to secure a

APAVE certified resistance 10 892 86 Threaded rod, length 160 mm for anchoring on the frame Supplied with M6 nut Junction boxes

20 89 70 67 x 0 mm 80 mm 10 89 71 8 x 0 mm 100 x 100 mm 10 89 72 11 x 11 x 0 mm 10 x 10 mm 10 89 7 160 x 10 x 0 mm 190 x 1 mm 10

3 flush-mounting boxes for dry partitions (continued) flush-mounting boxes for dry partitions Installation example of use Pack Cat.Nos Boxes with cover for luminaires For ceiling rose unit mm - depth 0 mm Supplied with hook Equipped with inputs For striplight mm - depth 0 mm 2 Hole cutter saw 67 Box 67 mm, more space for cabling Fixing accessories for ceiling rose units Anchoring device Quick installation by self-locking system Supplied with 2 m long steel cable Used to secure a ceiling rose unit by anchoring on the framework of the structure (up to 2 kg) Automatic tightening of the cable without any tool APAVE certified resistance Threaded rod, length 160 mm for anchoring on the frame Supplied with M6 nut Junction boxes Supplied with cover and screws Knockout base Box ext. dim. Cover dim x 0 mm 80 mm x 0 mm 100 x 100 mm x 11 x 0 mm 10 x 10 mm x 10 x 0 mm 190 x 1 mm x 170 x 0 mm 19 x 19 mm x 170 x 0 mm 22 x 210 mm Retractable fixing claws for a better comfort during installation Fixing claws adapted to the thickness of the wall Automatic positioning, even with an electric screwdriver Large space to improve fixing (according to the drilling 67 to 68 mm) 7

4 flush-mounting boxes for masonry x (back to back joining) 1 01 (fitted alongside) Pack Cat.Nos 1-gang boxes For 1 module Depth 0 mm - Width 2 mm Square boxes for joining together For wiring accessories using screws or claws 1-gang boxes can be used to make up multi-gang boxes by joining Can be used horizontally or vertically Cutting out of internal partitions for mounting extended functions Supplied with screws fitted with protective shield Knockout cable entries, Depth 0 mm Depth 0 mm Round Depth 0 mm - 67 mm Upper flange can be cut to obtain a depth of 0 mm (for controls, 2-way switches, push-buttons, etc.) Boxes can be joined back to back by 1/ of a turn Adjustable dimensions (80, 70 or 60 mm) by cutting the flange With screws Multi-gang boxes Batibox for masonry For module Arteor, Céliane, Vela, Mosaic ranges Supplied with screws Depth 0 mm Knockout cable entries, Batibox for multi-material For Arteor, Mosaic, Céliane, Galea Life ranges Depth 0 mm x 2 gang or 2 x / modules Dimensions: 12 x 12 mm x gang or 2 x 6/8 modules Dimensions: 21 x 12 mm Box for Italian type boxes for masonry For screw or claw mounting devices Arteor, Mosaic, Céliane, Vela ranges Supplied without screws Horizontal mounting Depth 0 mm For modules x 71 mm For modules - 10 x 71 mm For 6 modules x 71 mm Divider for multi-gang boxes For installation in flush-mounting boxes Used for wiring devices with fixing screws in horizontal position For 0 mm deep boxes For 0 mm deep boxes Pack Cat.Nos Universal box for screw or claw mounting Supplied without screws Can be used with Arteor, Céliane, Galea Life, Mosaic, Vela, Valena and Suno ranges, Horizontal and vertical mounting gang unit Can be fitted alongside one another Can be used as junction box with cover Cat.No Cover 80 x 80 mm used in order to convert boxes Cat.No 1 01 into junction boxes Box for 20 A and 2 A sockets 1-gang 8 x 8 mm For cable outlets Cat.No 1 90 and 20 A sockets Cat.Nos 2//7 and 2 A sockets Cat.Nos 8 12/1/17 Depth 0 mm Vertical positioning of the screws for fixing 20 A and 2 A sockets Box for shaver socket 801 For Mosaic shaver socket Cat.No 7 86, and Céliane Cat.No Depth 0 mm Luminaire boxes with cover For ceiling rose units mm - depth 0 mm Supplied with hook For striplights mm - depth 0 mm Complete junction boxes Rectangular with knockout cable entries Boxes supplied with cover and screws Supplied with plaster shield (except for Cat.No ) Box ext. dim. Cover dim x 8 x x x 120 x 0 10 x x 11 x x x 17 x 0 19 x x 180 x 0 2 x 210 Large capacity Accept 2 and 2 tubes x 180 x 70 mm x 2 x 70 mm 7 Red catalogue numbers: New products

flush-mounting boxes for masonry (continued) flush-mounting boxes for masonry Installation 1 819 0 819 60 Pack Cat.

mm, 20 892 81 Square cover, 80 x 80 mm, 10 801 82 Cover for Batibox 2-gang box, 2 Horizontal or vertical joining of 1 gang boxes (Cat.

Dimensions 70 x 70 mm Colour marking for identifying after plastering Tool for flush-mounting boxes Tungsten carbide gritted saw 1 801 67 For use in very hard or abrasive materials (bricks, building

Ideal for drilling holes intended for mounting multi-material boxes 67 mm Box for concrete walls One-gang box 0 819 0 For mounting - in wooden casing alone, - with blanking cover Cat.

No 819 71 (consult us) Cover for concrete boxes 20 819 72 Installation/blanking cover used for installation on wooden casing or for blanking in back to back mounting Ring 20 819 60 6 mm ring Cat.

5 flush-mounting boxes for masonry (continued) flush-mounting boxes for masonry Installation Pack Cat.Nos Universal covers For converting wiring devices boxes into junction boxes or for closing up an existing box Supplied with fixing screws For one-gang or multi-gang boxes Round cover, 8 mm, Square cover, 80 x 80 mm, Cover for Batibox 2-gang box, 2 Horizontal or vertical joining of 1 gang boxes (Cat.No 801 1) Equipment accessories Long screw mm length 0 mm for all Batibox boxes Plaster shield for protecting the internal volume For 1 to -gang and multi-gang square boxes Dimensions 70 x 70 mm Colour marking for identifying after plastering Tool for flush-mounting boxes Tungsten carbide gritted saw For use in very hard or abrasive materials (bricks, building blocks, tiling, cement, hard woods, composites, plasterboard, etc.) Equipped with a carbide tipped pilot drill. Ideal for drilling holes intended for mounting multi-material boxes 67 mm Box for concrete walls One-gang box For mounting - in wooden casing alone, - with blanking cover Cat.No Fixing of screw or claw-mounting wiring accessories with ring Cat.No Can be combined side by side with cover Cat.No (consult us) Cover for concrete boxes Installation/blanking cover used for installation on wooden casing or for blanking in back to back mounting Ring mm ring Cat.No Supplied with screws For mounting equipment using screws The sides can be removed before or after joining The screws are supplied with protection cap (against plaster) Protection cover (Cat.No ) Colour marking for identifying after plastering Legrand_Wiring_Flush-mounting_Bboxes_en_0811.pdf Helsinki tel automation@klinkmann.fi St. Petersburg tel klinkmann@klinkmann.spb.ru Moscow tel moscow@klinkmann.spb.ru Yekaterinburg tel yekaterinburg@klinkmann.spb.ru Samara tel samara@klinkmann.spb.ru Кiev tel klinkmann@klinkmann.kiev.ua Riga tel klinkmann@klinkmann.lv Vilnius tel post@klinkmann.lt Tallinn tel klinkmann.est@klinkmann.ee Мinsk tel minsk@klinkmann.com

NEW. telephone sockets. Support frames and plates selection charts (p. 514 to 521) Support frames and plates selection charts (p.

NEW. telephone sockets. Support frames and plates selection charts (p. 514 to 521) Support frames and plates selection charts (p. television sockets telephone sockets 5721 72 5726 72 5723 00 5728 13 Support frames and plates selection charts (p. 514 to 521) Support frames and plates selection charts (p. 514 to 521) Pack Cat.Nos Television