Weatherproof Boxes, Covers, Lampholders & Lighting Fixtures

Size: px

Start display at page:

Download "Weatherproof Boxes, Covers, Lampholders & Lighting Fixtures"

Elisabeth Hood
6 years ago
Views:

FG2 FG2 Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures Applications: Use in branch circuit wiring for wet, damp, or dry locations May be used as a junction box or a device box for

Lighting Fixtures are for use in areas where moisture ingress is a concern such as construction sites, tunnels, bridges, subways.

1 FG2 FG2 Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures Applications: Use in branch circuit wiring for wet, damp, or dry locations May be used as a junction box or a device box for switches, receptacles, GFCI s, etc. Lampholders are for use in exterior and interior applications to provide safety and security for driveways, doorways, and walkways. Lighting Fixtures are for use in areas where moisture ingress is a concern such as construction sites, tunnels, bridges, subways. Features and Benefits: Rugged continuous and seamless die cast construction prevents entry of dirt, dust and moisture. Powder coating is applied for uniform cosmetic coating and weatherproof durability. Mounting can be achieved with mounting lugs (provided) or by using the integral mounting knockouts. Smooth, accurately tapped hubs prevent wire abrasion. Clear UL marking and volumetric marking cast into each box and extension ring facilitate electrical inspection. Continuous box and cover compression ensure complete sealing at gasket interface to prevent moisture entry. Lockable covers and covers with integral devices are offered. Closure plugs (2), mounting lugs (2) and green ground screw provided with each box. Mounting hardware and gasket provided with each cover. Locking swivel knuckle on lampholders permits positive lamp positioning and accurate directional aiming. Lampholders are supplied with all hardware including locknuts, porcelain sockets and internal gaskets for reliability and weather protection. Photocells and lampholders are supplied with long leads (4 from the end of the knuckle) to facilitate wiring. Lighting fixtures are factory assembled and fully gasketed to ensure fast and easy installation. Complete installation instructions are provided with each item. Sturdy corrugated boxes with easy lift off top facilitate merchandising. In-Use covers include: patented inserts and comply with NEC requirements. Most of the boxes, covers, and lampholders are individually shrink wrapped, labeled and bar coded for ease of handling and identification. Lighting fixtures are individually boxed, labeled, and bar coded for ease of handling and identification. Well-marked outer boxes combined with shrink wrapping facilitate merchandising. Materials: Boxes, Extensions, Covers, Lampholders, Lighting Fixtures, and Closure plugs: Zinc Die Cast. In-Use covers: polycarbonate. Most of the boxes, covers, and lampholders are individually shrink wrapped, labeled and bar coded for ease of handling and identification. Lugs: Stamped Aluminum (One and two gang boxes), Integrally cast (round boxes). Cover screws: Plated Steel. Gaskets: Closed cell foam (covers), Fiber (lampholders), Closed cell foam or Fiber (lighting fixtures). Glass: Annealed glass. Sockets: Porcelain (lampholders and lighting fixtures). Compliances: UL and cul Listed.

2 FG3 FG3 Capacity of Steel Boxes and Covers Number of Conductors in Outlet, Device, and Junction Boxes, and Conduit Bodies. Boxes and conduit bodies shall be of sufficient size to provide free space for all enclosed conductors. In no case shall the volume of the box, as calculated in (A), be less than the fill calculation as calculated in (B). The minimum volume for conduit bodies shall be as calculated in (C). The provisions of this section shall not apply to terminal housings supplied with motors. FPN: For volume requirements of motor terminal housings, see Boxes and conduit bodies enclosing conductors 4 AWG or larger shall also comply with the provisions of (A) Box Volume Calculations. The volume of a wiring enclosure (box) shall be the total volume of the assembled sections and, where used, the space provided by plaster rings, domed covers, extension rings, and so forth, that are marked with their volume or are made from boxes the dimensions of which are listed in Table (A). (1) Standard Boxes. The volumes of standard boxes that are not marked with their volume shall be as given in Table (A). (2) Other Boxes. Boxes 1650 cm3 (100 in.3) or less, other than those described in Table (A), and nonmetallic boxes shall be durably and legibly marked by the manufacturer with their volume. Boxes described in Table (A) that have a volume larger than is designated in the table shall be permitted to have their volume marked as required by this section. Table (A) Metal Boxes Box Trade Size Minimum Volume Maximum Number of Conductors* mm in. cm3 in (4 1¼) round/octagonal (4 1½) round/octagonal (4 2) round/octagonal (4 1¼) square (4 1½) square (4 2) square (4 1¼) square (4 1½) square (4 2) square (3 2 1½) device (3 2 2) device (3 2 2¼) device (3 2 2½) device (3 2 2¾) device (3 2 3½) device (4 2 1½) device (4 2 1) device (4 2 2) device (3¾ 2 2½) masonry box/gang (3¾ 2 3½) masonry box/gang min depth FS single cover/gang (1¾) min depth FD single cover/gang (2) min depth FS multiple cover/gang (1¾) min depth FD multiple cover/gang (2) *Where no volume allowances are required by (B)(2) through (B)(5). (1) Conductor Fill. Each conductor that originates outside the box and terminates or is spliced within the box shall be counted once, and each conductor that passes through the box without splice or termination shall be counted once. A looped, unbroken conductor not less than twice the minimum length required for free conductors in shall be counted twice. The conductor fill shall be calculated using Table (B). A conductor, no part of which leaves the box, shall not be counted. Exception: An equipment grounding conductor or conductors or not over four fixture wires smaller than 14 AWG, or both, shall be permitted to be omitted from the calculations where they enter a box from a domed luminaire (fixture) or similar canopy and terminate within that box. (2) Clamp Fill. Where one or more internal cable clamps, whether factory or field supplied, are present in the box, a single volume allowance in accordance with Table (B) shall be made based on the largest conductor present in the box. No allowance shall be required for a cable connector with its clamping mechanism outside the box. (3) Support Fittings Fill. Where one or more luminaire (fixture) studs or hickeys are present in the box, a single volume allowance in accordance with Table (B) shall be made for each type of fitting based on the largest conductor present in the box. (4) Device or Equipment Fill. For each yoke or strap containing one or more devices or equipment, a double volume allowance in accordance with Table (B) shall be made for each yoke or strap based on the largest conductor connected to a device(s) or equipment supported by that yoke or strap. Table (B) Volume Allowance Required per Conductor Free Space Within Box for Each Conductor Size of Conductor (AWG) cm3 in (5) Equipment Grounding Conductor Fill. Where one or more equipment grounding conductors or equipment bonding jumpers enter a box, a single volume allowance in accordance with Table (B) shall be made based on the largest equipment grounding conductor or equipment bonding jumper present in the box. Where an additional set of equipment grounding conductors, as permitted by (D), is present in the box, an additional volume allowance shall be made based on the largest equipment grounding conductor in the additional set Receptacles in Damp or Wet Locations. (B) Wet Locations. (1) 15- and 20-Ampere Receptacles in a Wet Location. 15- and 20-ampere, 125- and 250-volt receptacles installed in a wet location shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted. (2) Other Receptacles. All other receptacles installed in a wet location shall comply with (B)(2)(a) or (B)(2)(b). (a) A receptacle installed in a wet location, where the product intended to be plugged into it is not attended while in use, shall have an enclosure that is weatherproof with the attachment plug cap inserted or removed. (b) A receptacle installed in a wet location where the product intended to be plugged into it will be attended while in use (e.g., portable tools) shall have an enclosure that is weatherproof when the attachment plug is removed. (B) Box Fill Calculations. The volumes in paragraphs (B)(1) through (B)(5), as applicable, shall be added together. No allowance shall be required for small fittings such as locknuts and bushings. Reproduced with permission of NFPA.

3 FG4 One Gang Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included. FG4 WSL150 WSL175 WSM150 WSM175 WSM110 WSP150 WSP175 WSX150 WSX175 WSX110 WDM150 WDM175 WDM110 WDX150 WDX175 WDX110 WE1 Extension Adapter Gasket and Screws Included WEFX50 WEFX75 Flanged Extension Adapter Gasket and Screws Included Wiring Catalog Capacity Hub No. of Wt Per Case Number Depth (Cu. In.) Size Hubs Packaging 100 (lbs) Qty WSL150* Shrink Wrapped WSL175* Shrink Wrapped WSM150* Shrink Wrapped WSM175* Shrink Wrapped WSM Shrink Wrapped WSP150* Shrink Wrapped WSP175* Shrink Wrapped WSX Shrink Wrapped WSX Shrink Wrapped WSX Shrink Wrapped WDM150* Shrink Wrapped WDM Shrink Wrapped WDM Shrink Wrapped WDX Shrink Wrapped WDX Shrink Wrapped WDX Shrink Wrapped WE1* Shrink Wrapped WEFX50* Shrink Wrapped WEFX75* Shrink Wrapped * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

4 FG5 Dimensions: One Gang Boxes and Extensions FG5 Catalog Number A B C D E F G H J WSL WSL WSM WSM WSM WSP WSP WSX WSX WSX WDM WDM WDM WDX WDX WDX F End View End One View Outlet One Outlet E H B J End End View View Two Outlets D C G A C D /8" /2" 2 9 /16" 9 16 Extension WE /32" 4 5 /8" 2 3 /4" 5 1 /4" Flanged Extension Adapter WEFX50 WEFX Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Adapters allow installer to add take-offs to new boxes and/or devices.

5 FG6 Two Gang Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included. FG6 WSK250 WSK275 WSL250 WSL275 WSM250 WSM275 WSM210 WSP250 WSP275 WSR250 WSR275 WST250 WST275 WSX250 WSX275 WSX210 WDK250 WDK275 WDK210 WDP250 WDP275 WDP210 WE2 Wiring Catalog Capacity Hub No. of Wt Per Case Number Depth (Cu. In.) Size Hubs Packaging 100 (lbs) Qty WSK Shrink Wrapped WSK Shrink Wrapped WSL250* Shrink Wrapped WSL275* Shrink Wrapped WSM250* Shrink Wrapped WSM275* Shrink Wrapped WSM210* Shrink Wrapped WSP250* Shrink Wrapped WSP275* Shrink Wrapped WSR Shrink Wrapped WSR Shrink Wrapped WST Shrink Wrapped WST Shrink Wrapped WSX Shrink Wrapped WSX Shrink Wrapped WSX Shrink Wrapped WDK Shrink Wrapped WDK Shrink Wrapped WDK Shrink Wrapped WDP Shrink Wrapped WDP Shrink Wrapped WDP Shrink Wrapped WE2* Shrink Wrapped * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

6 FG7 Dimensions: Two Gang Boxes and Extensions FG7 Catalog Number A B C D E F G H J K L WSK WSK WSL WSL WSM WSM WSM WSP WSP WSR WSR WST WST WSX WSX WSX WDK WDK WDK WDP WDP WDP A G /8" /8" 3 5 /8" J E H B K K 3 3 /4" D C L F 1 1" Extension WE2 Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Adapters allow installer to add take-offs to new boxes and/or devices.

7 FG8 Round Weatherproof Outlet Boxes and Extensions Die Cast Metal. Closure plugs, ground screw and mounting lugs included. FG8 WRX50 WRX75 WRX50CG WRX75CG Cover and gasket included WERX50 WERX75 Extension Wiring Catalog Capacity Hub No. of Wt Per Case Number Depth (Cu. In.) Size Hubs Packaging 100 (lbs) Qty WRX50* Shrink Wrapped WRX75* Shrink Wrapped WRX50CG* Shrink Wrapped WRX75CG* Shrink Wrapped WERX Shrink Wrapped WERX Shrink Wrapped * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Dimensions: /8" /2" /2" 1 9 /16" /4" /16" /4" 4 5 /16" 5 16 WRX50 WRX75 WRX50CG WRX75CG /2" /4" 3 1 /2" 2 3 /4" /16" /4" /16" 5 16 Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Extension WERX50 WERX75 Adapters allow installer to add take-offs to new boxes and/or devices.

8 FG9 Weatherproof Lampholders FG9 Die cast construction. Locking swivel knuckle permits lamp positioning and aiming. Supplied with porcelain sockets, gaskets, extra long leads, locknut and other hardware. For aiming horizontal or downward. For use with 150W maximum lamps. WLU1 WLI WL68 Catalog No. Description Color Packaging Wt. Per 100 Case Qty WLU1 Unfinished Lampholder Metal Boxed WLI* Finished Lampholder Grey Shrink Wrapped WL68* Lampholder w/5 1 8 hood Grey Boxed * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Dimensions: 5 1 /4" 4 3 3" WLU1 WLI 33 1 /2" /8" 7 8 WL68

9 FG10 One Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. FG10 On On Off Off WCB1 WCB14 WCT1 WCT115 WCT113 WCE1 WC1150 WC1250 WC1350 WC11L WC12L For horizontal to downward aiming (For use with 150W max. lamp) Catalog For use Wt Per Case Number Description Orientation with devices Color Packaging 100 (lbs) Qty WCB1* Blank Cover, 2-screws Universal Grey Shrink Wrapped (Stamped Aluminum) WCB14* Blank Cover, 4-screws Universal Grey Shrink Wrapped (Stamped Aluminum) WCT1* Toggle Switch Cover Vertical Switch (10A - 20A) Grey Shrink Wrapped WCT115* Toggle Switch Cover Vertical Switch (15A, 1-pole) Grey Shrink Wrapped w/switch included WCT113* Toggle Switch Cover Vertical Switch (15A, 3 Way) Grey Shrink Wrapped w/switch included WCE1 Cover with Photocell Universal Photocell (120A, 300W) Grey Shrink Wrapped (Stamped Aluminum) included WC1150* Raised Cover, one Universal 1 Photocell or Grey Shrink Wrapped hub lampholder WC1250* Raised Cover, two Universal 2 Photocells or Grey Shrink Wrapped hubs lampholders WC1350* Raised Cover, three Universal 3 Photocells or Grey Shrink Wrapped hubs lampholders WC11L* Raised Cover, one 1 2 Universal 1 Lampholder Grey Shrink Wrapped 81 8 hub with lampholder included WC12L* Raised Cover, two 1 2 Universal 2 Lampholders Grey Shrink Wrapped hubs with lampholders included * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

10 FG11 Dimensions: One Gang Covers FG WCB1 WCE WCB14 WCT1 WCT113 WCT WC1150 WC11L WC WC1350 WC12L

11 FG12 FG12 One Gang Weatherproof Covers and In-Use Covers Die Cast Metal. Gasket and mounting hardware included. WHS1 WVS1 WVP211 WVP161 WCDIU1 (In-Use deep cover) WVP21L1 WCIU1 (In-Use cover) Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WVS1* Self Closing Cover Vertical Single Recept or Switch Grey Shrink Wrapped WHS1* Self Closing Cover Horizontal Single Recept or Switch Grey Shrink Wrapped WVP211 Self Closing Power Outlet Vertical Single Recept (20A-50A) Grey Shrink Wrapped Cover (2.125 opening) WVP161 Self Closing Power Outlet Vertical Single Recept Grey Shrink Wrapped Cover (1.625 opening) (20A or 30A) WVP21L1 Self Closing Power Outlet Vertical Single Recept (20A-50A) Grey Shrink Wrapped Cover (2.125 opening) WCIU1 In-Use Cover, Universal Clear Shrink Wrapped 49 6 deep (Polycarbonate) WCDIU1 In-Use Cover, Universal Clear Shrink Wrapped 46 4 deep (Polycarbonate) * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Hasp diameter 3/16. Lock not included. Provided with inserts, devices not included. Effective November, 2011 Copyright 2011

FG13 Dimensions: One Gang Covers and In-Use Inserts FG13 2 13 15 2 3 8 2 13 16 WHS1 2 3 8

WCIU1 and WCDIU1 Inserts 3 inserts produce 14 configurations Single gang In-Use inserts can be

12 FG13 Dimensions: One Gang Covers and In-Use Inserts FG WHS Diameter DIA. Diameter WVS DIA. WCIU1 and WCDIU1 Inserts 3 inserts produce 14 configurations Single gang In-Use inserts can be used in both vertical and horizontal applications, by simply changing the hinge points Diameter WVP WVP WVP21L

13 FG14 FG14 One Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. WHD1 WHDO1 (Stay Open) WVD1 WVDL1 WHD1WR Cover and Receptacle WHG1 WVG1 Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WVD1* Self Closing Cover Vertical Duplex Recept or Switch Grey Shrink Wrapped WVDL1 Self Closing Cover Vertical Duplex Recept or Switch Grey Shrink Wrapped WHD1* Self Closing Cover Horizontal Duplex Recept or Switch Grey Shrink Wrapped WHDO1* Stay Open Cover Horizontal Duplex Recept or Switch Grey Shrink Wrapped WHD1WR* Self Closing Horizontal Duplex Recept Grey Shrink Wrapped Cover w/recept (15A, 120V) incl. WHG1* Self Closing Cover Horizontal GFCI Grey Shrink Wrapped WVG1* Self Closing Cover Vertical GFCI Grey Shrink Wrapped * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Hasp diameter 3/16. Lock not included.

14 FG15 Dimensions: One Gang Covers FG WHD1 WHDO1 WHD1WR WVD1 WVDL WHG WVG1

15 FG16 Two Gang Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. FG16 WCB24 WVSG2 WVDG2 WVGG2 WVTG2 WVTT2 WVTT215 WVTT213 WVTT220 Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WCB24* Blank Cover Universal Grey Shrink Wrapped (Stamped Aluminum) WVSG2* Self Closing Cover Vertical Single Recept + GFCI Grey Shrink Wrapped WVDG2* Self Closing Cover Vertical Duplex Recept + GFCI Grey Shrink Wrapped WVGG2* Self Closing Cover Vertical 2 GFCI Grey Shrink Wrapped WVTG2* Self Closing Cover Vertical Switch (10 A - 20A) + GFCI Grey Shrink Wrapped WVTT2* Toggle Switch Cover Vertical 2 Switches (15A - 20A) Grey Shrink Wrapped (Stamped Aluminum) WVTT215 Toggle Switch Cover Vertical 2 Switches (15A, 1-Pole) incl. Grey Shrink Wrapped (Stamped Aluminum) with switches WVTT213 Toggle Switch Cover Vertical 2 Switches (15A, 3-way) incl. Grey Shrink Wrapped (Stamped Aluminum) with switches WVTT220 Toggle Switch Cover Vertical 2 Switches (20A, 1-Pole) incl. Grey Shrink Wrapped (Stamped Aluminum) with switches * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

16 FG17 Dimensions: Two Gang Covers FG WCB24 WVSG WVDG WVGG WVTG2 WVTT2, WVTT2 15 WVTT213, WVTT2 20

17 FG18 Two Gang Weatherproof Covers and In-Use Covers Die Cast Metal. Gasket and mounting hardware included. FG18 WVDD2 WVSD2 WVSS2 WCIU2 (In-Use Cover ONLY) Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WVDD2* Self Closing Cover Vertical 2 Duplex Recept or Switches Grey Shrink Wrapped WVSD2* Self Closing Cover Vertical Single Recept + Duplex Recept Grey Shrink Wrapped WVSS2* Self Closing Cover Vertical 2 Single Recept or Switches Grey Shrink Wrapped WCIU2 In-Use Cover, Vertical Clear Shrink Wrapped 56 6 Deep (Polycarbonate) * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time. Provided with inserts, devices not included. Effective November, 2011 Copyright 2011

18 FG19 Dimensions: Two Gang Covers and In-Use Inserts FG19 9 /16" 44 9 /16" /16" /8" /16" /16" WVDD /16" WVSD /16" /8" 4 9 /16" 9 16 WVSS /16" 16 WCIU2 Inserts 6 inserts produce 70 configurations Two gang In-Use convertible inserts snap together to create combinations for almost every application.

19 FG20 Round Weatherproof Covers Die Cast Metal. Gasket and mounting hardware included. Lampholders are adjustable. Porcelain sockets. FG20 WCBR WCR150 WCR250 WCR350 WCR2L For horizontal to downward aiming For use with 150W max. lamp Box not included WCRD2LW For use with 150W max. lamp Catalog Wt Per Case Number Description Orientation For use with devices Color Packaging 100 (lbs) Qty WCBR* Blank Cover, 4 OD Universal Grey Shrink Wrapped (Stamped Aluminum) WCR150* Raised Cover, Universal 1 Photocell or lampholder Grey Shrink Wrapped One 1 2 hub WCR250* Raised Cover, Universal 2 Photocells or lampholders Grey Shrink Wrapped Two 1 2 hubs WCR350* Raised Cover, Universal 3 Photocells or lampholders Grey Shrink Wrapped Three 1 2 hubs WCR2L* Raised Cover, two 1 2 Universal 2 Lampholders included Grey Shrink Wrapped hubs with lampholders WCRD2LW Ceiling plate (deep) Universal 2 Lampholders included White Boxed with lampholders * Catalog number shown represents grey color. White (Suffix W) and Bronze (Suffix B) also available. Consult factory for lead time.

20 FG21 Dimensions: Round Covers FG /2" 22 3 /4" /2" /4" 1 4 WCBR WCR /2" /2" /2" /4" /4" 3 4 WCR250 Additional Additional knock-outs knock-outs provided for mounting provided for mounting to Round to 3 1 box. /2" Round box. WCR350, WCR2L 9 /16" /16" " /2" /16" 16 Hole 44 1 /2" 1 2 WCRD2LW

21 FG22 Weatherproof Incandescent Fixtures FG22 Rugged, seamless die cast construction. Factory assembled with guard, 120Volt rated. Ground screw, closure plugs and mounting lugs included. Use with 150 C supply wire. Use with medium base incandescent lamps. Grey color. WFA1050G WFA1075G WFA2050G WFA2075G WFC1050G WFC1075G WFC2050G WFC2075G WFW1050G WFW1075G WFW2050G WFW2075G Catalog Mounting No. of Wt per Case Number Style Hub Size Hubs Wattage Packaging 100 (lbs) Qty WFA1050G Pendant Boxed WFA1075G Pendant Boxed WFA2050G Pendant Boxed WFA2075G Pendant Boxed WFC1050G Ceiling Boxed WFC1075G Ceiling Boxed WFC2050G Ceiling Boxed WFC2075G Ceiling Boxed WFW1050G Wall Boxed WFW1075G Wall Boxed WFW2050G Wall Boxed WFW2075G Wall Boxed 510 1

22 FG23 Dimensions: Incandescent Fixtures FG23 B D Catalog Number A B C D WFA1050G WFA1075G WFA2050G WFA2075G A C B D Catalog Number A B C D WFC1050G WFC1075G WFC2050G WFC2075G A C E F B D Catalog Number A B C D E F WFW1050G WFW1075G WFW2050G WFW2075G A C

23 FG24 Weatherproof Accessories and Replacement Parts FG24 WSWITCH WPHOTO WPHOTO50 WGD Accessories Catalog Electrical Wt. Per Case Number Rating Description Color Packaging 100 (lbs) Qty WSWITCH 120 Volt, 5 Amp Automated Door Metal Shrink Wrapped Operated Light Switch WPHOTO 120 Volt, 300 Watt Photoelectric Night Shrink Wrapped Switch with Time Delay for Lamp Posts WPHOTO Volt, 300 Watt Photoelectric Night Grey Shrink Wrapped Switch with Time Delay 1 2 NPT w/locknut WGD Guard for Floodlight, Fits Chrome Shrink Wrapped 50 5 WLI and WLU1 Lampholders Replacement Parts Catalog Wt Per Case Number Description Color Packaging 100 (lbs) Qty WGSK1 Universal 1 gang gasket Black Shrink Wrapped 4 50 WGSK2 Universal 2 gang gasket Black Shrink Wrapped 2 50 WGSKD1 1 gang gasket, single and Black Shrink Wrapped 2 50 duplex covers WGSKEL External lampholder gasket Black Shrink Wrapped 6 50 WGSKIL Internal lampholder gasket Black Shrink Wrapped WGSKR Universal round gasket Black Shrink Wrapped 2 50 WLUGS 2 Mounting lugs w/ screws Grey Boxed WPLG104* 4 1 Closure Plugs Grey Shrink Wrapped WPLG504* Closure Plugs Grey Shrink Wrapped 8 75 WPLG754* Closure Plugs Grey Shrink Wrapped WSCR832 Ground Screw, Self Tapping, Green Boxed #8-32 x 1 4 WSOCKET Porcelain socket Grey Boxed WFG1 Heavy duty wire guard for Boxed watt fixtures, #8 AWS WFG2 Heavy duty wire guard for Boxed watt fixtures, #8 AWS WFGL1 Glass globe for 100 watt Boxed lighting fixtures WFGL2 Glass globe for 200 watt Boxed lighting fixtures * Catalog number shown represents grey color. White (Suffi x W) and Bronze (Suffi x B) also available. Consult factory for lead time.

Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures Index

FG Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures Index FG Features and Benefits...................................FG1 2002 NEC Requirements................................FG2 One Gang Boxes