AUSTRALIAN LIFTING CENTRE PTY LTD AUSTLIFT

Size: px
Start display at page:

Download "AUSTRALIAN LIFTING CENTRE PTY LTD AUSTLIFT"

Transcription

1 AUSTRALIAN LIFTING ENTRE PTY LT PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor

2 ontents Regular Proof oil Galvanised hain 141 Long Link Proof oil Galvanised hain 141 Security hain 141 S ook 142 Quick Link 142 Snap ook 142 Split Repair Link 143 Lynch Pin 143 R lips 143 Turnbuckle AISI 316 ook & Eye 144 Turnbuckle AISI 316 levis & levis 144 ottle Screws AISI 316 Toggle & Swage Stud 144 Stainless Steel 144 ottle Screw AISI 316 levis Toggle & Toggle 145 Eyebolt AISI316 Long Shank /W Nut & Washer 145 Wire Rope Grips AISI Wire Rope Thimbles AISI Eyenuts AISI Eyebolt With ollar AISI Standard ee Shackles AISI Snap ook AISI 316 /W Eyelet 146 S-ook AISI Fork Terminal AISI Round Ring AISI Saddles AISI PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor

3 Austlift Proof loaded hain are manufactured from low carbon steel and come in a variety of link formations and used for agricultural, industrial, manufacturing, marine and general engineering applications. General purpose hain with a variety of link dimensions Manufactured from low grade carbon steel Available in regular link and long link. Packed in 50kg pails and 500kg drum and cut length. Available in self colour, hot dip galvanized and zinc finish. NOT SUITALE FOR LIFTING APPLIATIONS 50KG PAIL PAK IMENSIONS 500KG RUM UT LENGT OE SIZE LENGT OE LENGT OE Mtr Mtr *J705010: 10 x 12Metres in 25kg Pail. NOT FOR LIFTING APPLIATIONS 50KG PAIL PAK UKET UKET IMENSIONS OERIAL AIN Regular Link, Proof Loaded, Galvanised hain Long Link, Proof loaded, Galvanised hain NOTE: imensions stated are approximate and subject to coercial tolerances. Regular Link G316 Stainless Steel hain Austlift Stainless Steel hain is manufactured from G316 Stainless which is highly resistant to corrosion in acid and alkaline and is well suited for Marine applications Available in a drum or cut lengths to suit your requirements NOT FOR LIFTING APPLIATIONS PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor 141 RUM UT LENGT OE SIZE LENGT OE LENGT OE Mtr Mtr KG RUM 500KG RUM IMENSIONS RUM UT LENGT OE SIZE LENGT OE Mtr

4 LIFTING YOUR USINESS TO A IGER LEVEL W Austlift Quick Links are used as a temporary way to connect coercial fittings coonly used with hain. Manufactured with low carbon steel. Sizes available from 4 to 16. Oval shaped with a hex screw lock gateway. Available in zinc plated finish only. NOT FOR LIFTING APPLIATIONS. E Austlift Snap ooks are used as a temporary way for connecting coercial products and as a light duty hanging devise that snap lock. Manufactured with low carbon steel. Sizes available from 4 to 15 Key hole shaped with a spring catch. Available in zinc plated finish only. NOT FOR LIFTING APPLIATIONS. X V OE SIZE OPENING IMENSIONS SIZE V W OE SIZE IMENSIONS E Austlift S-hooks are coonly used as a hanging devise and other general purpose applications Manufactured with low carbon steel. Sizes available from 3 to 10 S shaped hook. Available in zinc plated finish only. NOT FOR LIFTING APPLIATIONS. OE SIZE IMENSIONS PF compression, 142 OR, web optimization using a watermarked evaluation copy of VISION PFompressor

5 Austlift Split Links are used as a more permanent way to connect coercial fittings coonly used with hain products. Manufactured from mild steel Sizes available from 3 to 13. hain link shaped with large split gap for ease of attachment. Electroplated finish for anti-corrosion and ease of welding. NOT FOR LIFTING APPLIATIONS. Split Repair Link OE SIZE IMENSIONS M Austlift Lynch Pins are coonly used as a positive securing devise for shaft pins. Pin sizes from 4 to 10 available Made from low carbon steel and zinc plated. NOT FOR LIFTING APPLIATIONS. OE IMENSIONS M Lynch Pin 1 R lips Austlift R-lips are coonly used as a removable securing pin for shafts. Pin sizes from 3 to 6 available. Made from low carbon steel and zinc plated. NOT FOR LIFTING APPLIATIONS. OE IMENSIONS () L() () Wire Suite Shaft Wire Suite Shaft Wire Suite Shaft Wire Suite Shaft L PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor 143

6 LIFTING YOUR USINESS TO A IGER LEVEL STAINLESS STEEL STAINLESS STEEL FITTINGS NOT FOR LIFTING APPLIATIONS. Turnbuckle AISI 316 ook & Eye Austlift Stainless Steel ook and Eye Turnbuckles used as a tensioning devise and coonly use for Architectural, Rigging and Marine applications. ode: Size(d) M5 M6 M8 M10 M12 M16 L L Turnbuckle AISI 316 levis & levis Austlift Stainless Steel levis and levis Turnbuckles used as a tensioning devise and coonly use for Architectural, Rigging and Marine applications. ode: Size(d) M5 M6 M8 M10 M12 M16 L L A ottle Screws AISI 316 Toggle & Swage Stud Austlift Stainless Steel levis Toggle and Stud ottle Screw used as a tensioning devise and coonly use for Architectural, alustrade Rigging and Marine applications. ode: Size(d) M8 M10 M12 M16 M20 L L A ROPE(Φ) PF compression, 144 OR, web optimization using a watermarked evaluation copy of VISION PFompressor

7 ottle Screw AISI 316 levis Toggle & Toggle Austlift Stainless Steel levis Toggle and Toggle ottle Screw used as a tensioning devise and coonly use for Architectural, alustrade Rigging and Marine Applications. ode: Size(d) M8 M10 M12 M16 M20 L L A Austlift Stainless Steel Wire Rope Grips are for use with Stainless Wire Rope to form a loop to produce a termination for Architectural Rigging applications. ode: Size Austlift Stainless Steel Wire Rope Thimbles are for use with Stainless Wire Rope to form a protective loop to produce a termination for Architectural Rigging applications. ode Size A M3 M4 M5 M6 M8 M10 M x3 3.5x4 4x5 5x6 6x7 7x8 9x10 10x12 12x Wire Rope Grips AISI 316 Wire Rope Thimbles AISI 316 Eyebolt AISI 316 Long Shank /W Nut & Washer Austlift Stainless Steel ollared Eye olt Long Shank, used as an anchor point and with long shank has a wide variety of applications. ode: Size() M6x80 M8x80 M10x100 M12x Φ Φ PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor 145

8 Eyebolt with ollar AISI 316 LIFTING YOUR USINESS TO A IGER LEVEL Austlift Stainless Steel ollared Eye olt, used as an anchor point and has a wide variety of applications. Φ ode: Size() M6 M8 M10 M12 M Φ Standard ee Shackles AISI 316 Φ Austlift Stainless Steel ollared Eye Nut, used as an anchor point and has a wide variety of applications. ode: Size() M6 M8 M10 M12 M Φ Austlift Stainless Steel ee Shackles, used as a temporary connection devise and has a wide variety of applications. ode: Size() d Snap ook AISI 316 /W Eyelet Austlift Stainless Steel Snap ook, used as a temporary connection devise and has a wide variety of applications. ode: Size L PF compression, 146 OR, web optimization using a watermarked evaluation copy of VISION PFompressor

9 Austlift Stainless Steel Fork Terminal used as a wire termination and coonly use for Architectural, alustrade, Rigging and Marine applications. Fork Terminal AISI 316 ode: Size A L L S-ook AISI 316 Austlift Stainless Steel S-ook used as a hooking devise and has a wide variety of applications ode: Size IN 3/16 1/4 9/32 5/ A Slide uckle AISI 316 Austlift Stainless Steel Slide uckle used as an adjustable fitting for webbing and has a wide variety of applications Round Ring AISI 316 Austlift Stainless Steel Round Ring used as a ring devise and has a wide variety of applications Φ ode: Size(d) Φ Austlift Stainless Steel Saddle used as an as an anchor point and has a wide variety of applications Saddles AISI 316 ode: Size 3 A() 65 a() 51 () 34 E() 6 ode: Size () L W Austlift Stainless Steel Wire Rope Products Please check Page 153 PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor 147

10 SYNEY 43 Frank Street Wetherill Park, NSW 2164 T F MELOURNE 47 Technology rive, Sunshine West VI 3020 T F PERT Unit 5, 2-4 Mallaig Way anning Vale WA 6155 T F RISANE 7 urbell St Acacia Ridge, QL 4110 T F PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor

AUSTRALIAN LIFTING CENTRE PTY LTD

AUSTRALIAN LIFTING CENTRE PTY LTD AUSTRALIAN LIFTING ENTRE PTY LT 1300 100 120 WWW.AUSTLIFT.OM.AU ontents Regular Proof oil Galvanised hain 141 Long Link Proof oil Galvanised hain 141 Security hain 141 S ook 142 Quick Link 142 Snap ook

More information

Rigging and Miscellaneous Fittings

Rigging and Miscellaneous Fittings Turnbuckle Eye & Eye 0006 4MM 0121 5MM 0122 6MM 0123 8MM 0124 10MM 0125 12MM 0126 16MM Turnbuckle Jaw & Jaw 0137 5MM 0138 6MM 0139 8MM 0140 10MM 0141 12MM 0142 14MM 0143 16MM Turnbuckle Hook & Hook 0001i

More information

TURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES

TURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES HARDWARE: MEASUREMENTS CLOSED OPEN TURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES 207020 STEEL 11MM 0.43 196MM 7.72 8MM 0.31 7.72 11.50 207021 STEEL TYPE 316 10MM (3/8 ) 12MM 0.47 238MM 9.37 10MM

More information

SWIVELS- Y-LINK, ANGULAR CONTACT BEARINGS

SWIVELS- Y-LINK, ANGULAR CONTACT BEARINGS First ever angular contact bearing design- developed 1 st by Miller Standard models with Working Load Limits from 0.45 through 300 tons Specials available with Working Load Limits up to 1000 tons Wire

More information

General hardware items are designed for multiple purpose usage. Most general hardware items are electro-galvanized.

General hardware items are designed for multiple purpose usage. Most general hardware items are electro-galvanized. General Hardware Applications General hardware items, such as carabine hooks, quick links and s-hooks, are suitable for many different applications in various market segments like agriculture, industry,

More information

Don t see the size, color or product you are looking for? Give us a call (800) or

Don t see the size, color or product you are looking for? Give us a call (800) or Don t see the size, color or product you are looking for? Give us a call (00) -9 or email customerservice@handimanmarine.com Copper Stop 0 Bags/Box For / Wire Diameter For / Wire Diameter For / Wire Diameter

More information

HOBSON STAINLESS HARDWARE INDEX. Page CHAIN LINK 1 CLIP POLISHED CHAIN LINK POLISHED 2 CHAIN LINK QUIK POLISHED 2 EYE BOLT KIT 3

HOBSON STAINLESS HARDWARE INDEX. Page CHAIN LINK 1 CLIP POLISHED CHAIN LINK POLISHED 2 CHAIN LINK QUIK POLISHED 2 EYE BOLT KIT 3 HOBSON STAINLESS HARDWARE INDEX Page CHAIN LINK 1 CLIP POLISHED CHAIN LINK POLISHED 2 CHAIN LINK QUIK POLISHED 2 EYE BOLT KIT 3 EYE BOLT KIT WITH COLLAR 4 EYE BOLT WITH COLLAR 4 SADDLE EYE STRAP 5 EYE

More information

RIGGING & CANVAS FASTENERS

RIGGING & CANVAS FASTENERS BOATING ACCESSORIES ELECTRICAL ENGINE ACCESSORIES SPECIALTY FASTENERS FASTENERS Copper Stop Don t see the size, color or product you are looking for? Give us a call (00) 5-7977 or email customerservice@handimanmarine.com

More information

nls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia

nls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner

More information

PO Box (fax)

PO Box (fax) 4 Everts Avenue PO Box 208 Glens Falls, NY 280 800 8 998 8-9-008 (fax) www.henssgenhardware.com info@henssgenhardware.com 800 8 998 About Us - Snap Hooks & Pulleys Distributor Henssgen Hardware was established

More information

T-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts

T-Nuts St. Industrial Profile Systems Fasteners.  Technical Data. Application. Ordering Information. Catalog /US T-Nuts atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements

More information

Fits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"

Fits 1 3/4 Resilient Rings. Part # Shaft Height A 92-A /4 4.4 92-A /4 4.6 Fits 2 1/2 Resilient Rings. Part # Shaft Height A Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end

More information

Low-Intensity Infrared SAL

Low-Intensity Infrared SAL Low-intensity infrared SAL Page 1 6 Optical characteristics 10cd fixed or flashing 32cd fixed or flashing Colour aviation RED Horizontal beam 360 Vertical beam +6 +10 Low-Intensity 10 and 32cd with Stand-alone

More information

XS Roof Type Overview

XS Roof Type Overview XS Roof Type Installation Overview XS Linked CABLE system ON STEEL ROOF Rigorous testing has proven the strength and resistance of the XS Linked Cable System on a steel roof. The main components of an

More information

TWISTLOCKS - FLATBED TYPE RETRACTABLE

TWISTLOCKS - FLATBED TYPE RETRACTABLE 3 1/4" 825 MM MODEL 1101-1132 Ø4 3/4" 1205 MM 13/16" 20 MM 1110-4507 SPLIT ROLL 1109-1132-3 1101-1132-6 POSITIONER SHOWN IN POSITION FOR LEFT LOCKING 1109-1132-1 5 1/16" 128 MM 7 1/8" 181 MM 1105-1132-2

More information

ICAO Low-intensity Type A (10cd) + Infrared 850nm ICAO Low-intensity Type B (32cd) + Infrared 850nm

ICAO Low-intensity Type A (10cd) + Infrared 850nm ICAO Low-intensity Type B (32cd) + Infrared 850nm DATASHEET ICAO Low-intensity Type A (10cd) + Infrared 850nm 05 Feb 2016 Low-Intensity 10cd and 32cd with Infrared 850nm Stand-alone LED Aviation Obstruction Lights Low-intensity red aviation warning light

More information

Technical Data Sheet Screw Clamps and Universal Clamps

Technical Data Sheet Screw Clamps and Universal Clamps Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter

More information

CROSSARMS 1-1. SIZE: 100 x 50 x 10.73kg/m, 2.4m LONG MOUNTED FOR CUT OUT BRACKET DESCRIPTION: H-POLE MOUNTED VOLTAGE REGULATOR PLATFORM D-DT #: 3016

CROSSARMS 1-1. SIZE: 100 x 50 x 10.73kg/m, 2.4m LONG MOUNTED FOR CUT OUT BRACKET DESCRIPTION: H-POLE MOUNTED VOLTAGE REGULATOR PLATFORM D-DT #: 3016 DESCRIPTION: STEEL CHANNEL CROSSARM D-DT #: 3000 CROSSARMS 1-1 NOTES: SAP #: 0189877 STEEL CHANNEL CROSSARM; H-POLE SIZE: 100 x 50 x 10.73kg/m, 2.4m LONG MOUNTED FOR CUT OUT BRACKET MATERIAL: STEEL PARALLEL

More information

Rigging & Sail Handling

Rigging & Sail Handling Rigging & Sail Handling Wykeham Martin Furling Gear Mast Bands Davey Ash Blocks Deck Leads Shroud Plates Gaff Span Shackles Brass Track & Slides Spinnaker Pole Fittings Highfield Levers Rigging Screws

More information

National Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia

National Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia National Light Sources Pty Ltd 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical

More information

ICAO Low-intensity Type A Obstruction Light (10cd) with infrared ICAO Low-intensity Type B Obstruction Light (32cd) with infrared

ICAO Low-intensity Type A Obstruction Light (10cd) with infrared ICAO Low-intensity Type B Obstruction Light (32cd) with infrared DATASHEET 05 Feb 2016 Key features - Night Vision Goggles compatible - Based on LED-technology - Extremely reliable with long lifetime - Suitable for off-shore use - Very low power consumption - Wide input

More information

Connect. Electricians' tools, consumables and enclosures x 210.0mm x 210.0mm. 26.0mm. 6.0mm. 6.0mm. 6.0mm. 12.0mm.

Connect. Electricians' tools, consumables and enclosures x 210.0mm x 210.0mm. 26.0mm. 6.0mm. 6.0mm. 6.0mm. 12.0mm. Connect Electricians' tools, consumables and enclosures Tooling and consumables which includes hand tools, crimping tools and solar tools for MC3 & MC4 connectors, electrical insulation tapes, cable pulling

More information

Electrical Accessories 1st June, 2016

Electrical Accessories 1st June, 2016 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner

More information

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183 North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06

More information

Prime Railway Services Radial Door - Order Form

Prime Railway Services   Radial Door - Order Form Radial Door - Order Form Prime Part # 1130 Customer/Location: Tel: Fax: Quantity: Door ID#: Door Type: Tri Bi Door Location: BR BL AR AL BL Doors Only: Sliding Door or Pan Exterior Door Colour Red Yellow

More information

Terminals, Lugs, and Fasteners

Terminals, Lugs, and Fasteners Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying

More information

Smartpak Hardware, Little Brother of Maxpac

Smartpak Hardware, Little Brother of Maxpac HD17S Glass Plates Quantity Boxed 20918S Slotted Electro Brassed 32mm (1.1/4") 4 10 22119S Slotted Chrome Plated 32mm (1.1/4") 4 10 20918S 22119S 20266S Round Electro Brassed 19mm (3/4") 4 10 20919S Round

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E478 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2004 5 30 (E1) 1 2 3 4 5 6 23 24 7 8 9 10 25 26 17 18 27 28 29 30 31 32 33 34 11 35 12 36 13 14 37 38 15 16 19 20 21 22 54 55

More information

Ball and Socket Shafts Series 0.800

Ball and Socket Shafts Series 0.800 Ball and Socket Shafts Series 0.0 Ball and Socket Shafts Series 0.0.1 Size 0..9 Md max Nm double, with length compensation, Standard bore Spline profile Standard bore Spline profile Standard bore When

More information

LIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1

LIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1 Model ROTARY HAMMER LIST F409 (E1) 2009 9 7 22% TU01658 DH28PD Rev.1 113 1 2 3 4 5 6 7 8 9 10 11 14 15 16 20 21 17 18 22 23 24 25 29 27 30 31 19 32 33 34 35 36 37 38 62 63 64 67 68 69 65 66 70 71 72 73

More information

Online version - not for reprint

Online version - not for reprint (0) A Engine housing... B Cylinder... B Cylinder... C Rewind starter, Ignition system... C Rewind starter, Ignition system... D Chain brake... E Quick tensioner parts... F Air filter, Cover... G Handle

More information

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50. ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)

More information

651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD

651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD 600 SOCKET HEAD CAP SCREWS 602 SOCKET SET SCREWS Page...........596602 Page.......................603 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS 615

More information

060-Hardware. Clamps and Brackets Hose Clamps

060-Hardware. Clamps and Brackets Hose Clamps Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

More information

Connect Electricians' tools, consumables and enclosures

Connect Electricians' tools, consumables and enclosures Connect Electricians' tools, consumables and enclosures 220 Tooling and consumables including electricians' hand tools, electrical insulation tapes, cable pulling socks, morse hole saws & accessories

More information

TRELLIS HARDWARE. When Quality & Service Matter...

TRELLIS HARDWARE. When Quality & Service Matter... TRELLIS HARDWARE When Quality & Service Matter... Trellis Hardware Guy Wire & Fittings Pole Hardware Earth Anchoring Systems Phone (800) 431-3095 www.fehr.com/trellis Fax (888) 352-1790 Volume 2 Copyright

More information

Online version - not for reprint

Online version - not for reprint (0) A Crankcase, Cylinder... X Tools, Extras... B Rewind starter... C Rewind starter ErgoStart... D Muffler... E Ignition system, Clutch... F Engine housing (Wrap around handle)... G Engine housing (Wrap

More information

Stainless Steel Hatch Fasteners Page

Stainless Steel Hatch Fasteners Page Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back

More information

Husqvarna X4000. Illustrated Parts List Jun 2009

Husqvarna X4000. Illustrated Parts List Jun 2009 Husqvarna Illustrated Parts List -0 0 Jun 00 MAINFRAME 00 000 MAINFRAME ASSEMBLY, 000 COVER, BELT GUARD 00 WHEEL COVER 000 ROLLCAGE, RIGHT 000 ROLLCAGE, LEFT 00 BLOCK, SPRING 00 BRACKET, ACTUATOR MOUNT

More information

3000M UT Page 1 of 28 Air Cleaner

3000M UT Page 1 of 28 Air Cleaner 3000M UT-26021 Page 1 of 28 Air Cleaner 3000M UT-26021 Page 2 of 28 Air Cleaner Ref # Part Number Qty S/P/F Description 175 GM240308 1 CLEANER ASSY Includes ref 178 thru 182 176 GM002811 1 SCREW & WASHER

More information

3000j UT Page 1 of 24 Air Filter & Carburetor

3000j UT Page 1 of 24 Air Filter & Carburetor 3000j UT-26034 Page 1 of 24 Air Filter & Carburetor 3000j UT-26034 Page 2 of 24 Air Filter & Carburetor Ref # Part Number Qty S/P/F Description 1 07752 1 S SCREW & WASHER Torque Specs: 35-45 2 07754 1

More information

Load Pins Custom Build Load Pins

Load Pins Custom Build Load Pins Features Load Pins Custom Build Load Pins 0.5-500Te capacities available. Overload 200% of rated capacity. Ultimate breaking load >500% of rated capacity. Temperature compensated wheatstone bridge. Stainless

More information

410 Chain Saw UT B Page 1 of 10 Engine & Peripherals

410 Chain Saw UT B Page 1 of 10 Engine & Peripherals 410 Chain Saw UT-10486-B Page 1 of 10 Engine & Peripherals 410 Chain Saw UT-10486-B Page 2 of 10 Engine & Peripherals 1 82253 3 /P SCREW- Pan hd. (8-32 x 3/8") 2 93628 1 /P COVER- Clutch 3 93639 1 S SPIDER-

More information

Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable

More information

P143 Pressure Regulator

P143 Pressure Regulator P Pressure Regulator Versatile ontrol Accuracy ompact esign Low Pressure ut-off The Type P pressure regulator is ideal for natural gas, air, propane and general purpose gas pressure regulation. Uses include

More information

Bolt 1/4"x 2" Grade 2 Zinc , , , Nyloc Hex Nut 5/16" , , ,

Bolt 1/4x 2 Grade 2 Zinc , , , Nyloc Hex Nut 5/16 , , , Color Logo use on white background only Parts Details LH00, LH000, LH00, LH000, Track Sections & Engines Updated: //0 TIE DOWN ENGINEERING Villanova Drive SW Atlanta, GA 0 www.tiedown.com (0) -0000 Fax

More information

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50. Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,

More information

Invisible Hinges Page

Invisible Hinges Page Finish: Izerwaren Invisible Hinges Page -4-1-1 Seawater Resistant Satin nickel plated MINI INVISIBLE HINGES WITH STAINLESS STEEL PINS invisible hinge for minimum door thickness 1/2 Small Invisible Hinge

More information

R u b b e r d i s t r i b u t o r

R u b b e r d i s t r i b u t o r Rubber distributor The modular rubber distributor series We live in a fast-moving time. It is also frequently necessary to make modifications to power distribution systems. Power distributors used in industrial

More information

METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL

METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from

More information

Husqvarna X2000E. Illustrated Parts List ConstructionParts.com ConstructionParts.com. ConstructionParts.

Husqvarna X2000E. Illustrated Parts List ConstructionParts.com ConstructionParts.com. ConstructionParts. Husqvarna X000E Illustrated Parts List -0 0 Jun 00 MAINFRAME ASSEMBLY 0 X000E 000 MAINFRAME ASSEMBLY, X000 000 SHSB, / x / 00 SHAFT, ARBOR LOCK 00 FRAME, ROLL CAGE, X000 0 COVER, BELT GUARD 00 COVER, BELT

More information

Panel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet

Panel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous

More information

OWNER & OPERATOR INSTRUCTION MANUAL

OWNER & OPERATOR INSTRUCTION MANUAL For service contact: German Knife Inc. -00-00- www.turboairinc.com OWNER & OPERATOR INSTRUCTION MANUAL Model No. GBS-0S IMPORTANT SAFETY NOTICE To ensure safe and trouble free performance of you new German

More information

BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c

BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents

More information

"B" COLLETS SOYER COLLETS

B COLLETS SOYER COLLETS STUD DIA. 3 mm CDB-003M 14 Ga CDB-008 12 Ga & #4 CDB-010 1/8 Ga & #5 CDB-012 10 Ga & #6 CDB-013 4 mm CDB-004M #8 CDB-015 #10 & 5 mm CDB-018 6 mm CDB-006M.215" CDB-021 1/4" CDB-025 5/16" & 8 mm CDB-031

More information

Transport. Hi Tensile Chain / Links. Section 8. Hi Tensile Grade 70 Transport Chain. Hi Tensile Mid Links

Transport. Hi Tensile Chain / Links. Section 8. Hi Tensile Grade 70 Transport Chain. Hi Tensile Mid Links Hi Tensile Chain / Links Hi Tensile Grade 70 Chain Size Finish Lashing Capacity 0958 6MM Gold 2.3T 0959 7MM Gold 3.0T 0960 8MM Gold 3.8T 0960Ix9 8MM x 9M c/w hooks Gold 3.8T 0961 10MM Gold 6.0T 0962 13MM

More information

security fasteners for every application

security fasteners for every application security fasteners for every application Welcome to Hafren 2 Specifying & Ordering Hafren Security Fasteners 5 2-Hole Screws 6 Pin Hex Screws 8 6-Lobe Pin Screws 10 6-Lobe Pin Self Drilling Screws 12 6-Lobe

More information

OTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any

More information

Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...

Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized... Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...

More information

604 SOCKET HEAD BUTTON SCREWS

604 SOCKET HEAD BUTTON SCREWS 600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637

More information

CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION

CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - standard open trays PROUCT INFORMTION Table of Contents Open cable trays S25 - S26, S30M - S35W.... Pgs 4-5 Open cable trays S36 - S39W, S30- -

More information

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges... STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...

More information

PARTS LIST MODEL: HD22

PARTS LIST MODEL: HD22 MODEL: HD MODEL: HD 0 0 MODEL: HD KEY PARTS NO. NO. DESCRIPTION 0 0 0 000 00 0000 000 000000 0 0000 000 0000 00 0000 0000 0000 000 000 00 00 00 000000 000 00 00 0000 0 000 00 0000 0000 000000 0000 0000

More information

Sno-Thro. Parts Manual. Models ST8526LE ST8526LE A 9/04 Printed in USA

Sno-Thro. Parts Manual. Models ST8526LE ST8526LE A 9/04 Printed in USA Sno-Thro Parts Manual Models 0 - STLE 0 - STLE 0000A /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you

More information

300 Chain Saw UT Page 1 of 17 Accessories I

300 Chain Saw UT Page 1 of 17 Accessories I 300 Chain Saw UT-10687 Page 1 of 17 Accessories I 300 Chain Saw UT-10687 Page 2 of 17 Accessories I A-02177 A02177 1 BUMPER SPIKE KIT 9477299 9477299 1 /P RUBBER TUBING (10') 18453 18453 1 /P GREASE- Multi-Purpose

More information

ANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS

ANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed

More information

MODELS MR44B & MR44K (See drawings below for additional parts)

MODELS MR44B & MR44K (See drawings below for additional parts) MODELS MRB & MRK (See drawings below for additional parts) 0 Cup Washer $. 00 Wir e Lock Pin,." x.0" $. 00 Screw Pin Shackle Clevi s $. 00 Worm Drive Hose Clamp (-/" to -/" Clamping Dia.) $. 0 Single Split

More information

Model 2704 Parts List * = Standard Equipment 〇 = Circuit Diagram

Model 2704 Parts List * = Standard Equipment 〇 = Circuit Diagram 2704 11-05 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 21 22 20

More information

Rebounder Rebounder Painted Weldments... Rebounder Connecting Hardware... Rebounder Assembly... Slam Station Assembly...

Rebounder Rebounder Painted Weldments... Rebounder Connecting Hardware... Rebounder Assembly... Slam Station Assembly... Synrgy 0 Training Systems Parts Manual //0 Table Of Contents Cable Cable Left Painted Frame Weldments... Cable Right Painted Frame Weldments... Cable Components... Cable Components Legend... Cable Carriage...

More information

FLEXBOX. Installation Guide

FLEXBOX. Installation Guide FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE

More information

lindab duct suspension & support system Duct suspensions & Support systems

lindab duct suspension & support system Duct suspensions & Support systems Duct suspensions & Support systems Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH0... 0 Threaded rod OSB 0...0 DRSN... 0 DRSNR... 0 Channels and channel brackets

More information

Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart

Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance

More information

AIR TERMINALS: COPPER

AIR TERMINALS: COPPER AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM

More information

SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL

SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,

More information

PARTS DESCRIPTION LISTING

PARTS DESCRIPTION LISTING PARTS DESCRIPTION LISTING Form 4-157e, 11-09 Sheet 2 of 6 Index No. Part Number Description A 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) B 69-1063-1 COVER, ASSEMBLY BACK DSP600 (See Sheet

More information

LIST NO. F423 ROTARY HAMMER (E1) Model DH 28PMY

LIST NO. F423 ROTARY HAMMER (E1) Model DH 28PMY Model ROTARY HAMMER LIST F423 2014 4 2 (E1) A A 5 6 7 8 9 17 18 19 20 21 22 23 11 13 14 15 12 24 25 26 27 28 29 30 31 32 33 34 35 36 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

More information

Flamco Mounting products

Flamco Mounting products M O U N T I N G P R O U C T S 8 Flamco Mounting products K BALL AN HINGE JOINT VG ANGULAR PLATE KCL PROFILE CLAMP GP MOUNTING PLATE BMG ASSEMBLY STRIP Edition 2007 / UK Mounting products The best flexible

More information

Tempofor. Mobile fences

Tempofor. Mobile fences Tempofor Mobile fences Betafence Quality Betafence strives relentlessly for optimum quality, without losing sight of users own particular requirements. Quality is of prime importance: it begins at the

More information

1.8 METER SERIES 1194 ANTENNA SYSTEM

1.8 METER SERIES 1194 ANTENNA SYSTEM April 20, 2016 REVISION J ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com 1.8 METER

More information

ROTARY HAMMER Model DH 26PC

ROTARY HAMMER Model DH 26PC LIST F418 ROTARY HAMMER Model 2013 5 22 (E1) 1 2 18 19 20 3 4 5 6 21 22 7 8 53 23 24 25 26 27 A 28 29 30 31 11 32 12 33 34 13 35 14 36 15 24 37 16 17 9 A 10 54 41 64 65 55 56 57 58 59 60 42 43 44 45 46

More information

Reduces installation time Locks tray into position - no hardware required

Reduces installation time Locks tray into position - no hardware required Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and

More information

Extra Large Full Motion TV Mount for Televisions

Extra Large Full Motion TV Mount for Televisions 8008981 TV Size Range: 47 ~ 84 Maximum Weight Capacity: 60 kg/132 lbs Maximum Mounting Pattern: 800 mm x 600 mm (31.4 x 23.6 ) Distance to the Wall: 5.5-45 cm Extra Large Full Motion TV Mount for 47-84

More information

LIST NO. F421 ROTARY HAMMER (E1) Model DH 24PH

LIST NO. F421 ROTARY HAMMER (E1) Model DH 24PH Model ROTARY HAMMER LIST F421 2013 5 22 (E1) A 29 73 1 2 3 4 5 6 7 17 8 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 A 501 502 503 38 39 9 24 17 40 41 42 43 44 45 46 47

More information

TrimLite String Trimmer UT Page 1 of 12 Accessories

TrimLite String Trimmer UT Page 1 of 12 Accessories TrimLite String Trimmer UT-20677 Page 1 of 12 Accessories TrimLite String Trimmer UT-20677 Page 2 of 12 Accessories Ref # Part Number Qty S/P/F Description 18453 1 /P GREASE, MULTI-PURPOSE 23488C 1 THREAD

More information

crocodiletm Exploded views / Part lists

crocodiletm Exploded views / Part lists crocodiletm Exploded views / Part lists Rev-date (0-0) On the following pages you will find the parts used to assemble this product. Please note that some spare parts cannot be purchased individually but

More information

BOLTS & SET SCREWS M6 SET SCREWS & BOLTS M12 SET SCREWS AND BOLTS M8 SET SCREWS AND BOLTS. All the fixings. listed here. are Grade 8.

BOLTS & SET SCREWS M6 SET SCREWS & BOLTS M12 SET SCREWS AND BOLTS M8 SET SCREWS AND BOLTS. All the fixings. listed here. are Grade 8. BOLTS & SET SCREWS Page updated 171120 Flints stocks a wide range of bolts and set screws. The most popular sizes are listed here. Our distributor holds thousands of tons of stock so if you can t find

More information

Block type Linear Ball Spline

Block type Linear Ball Spline U.S. PATENTE Block type Linear Ball Spline Block type Linear Ball Spline is a linear motion rolling guide, featuring a slide unit which performs endless linear motion along a spline shaft. Two rows of

More information

UT Page 1 of 22 Air Filter & Carburetor

UT Page 1 of 22 Air Filter & Carburetor 2840 UT-26031 Page 1 of 22 Air Filter & Carburetor 2840 UT-26031 Page 2 of 22 Air Filter & Carburetor Ref # Part Number Qty S/P/F Description 1 07752 1 S SCREW & WASHER Torque Specs: 35-45 In/lbs; 4-5

More information

Metfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:

Metfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph: Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m

More information

180 Olcott St Manchester, CT USA Local Fax Empire Industries, Inc.

180 Olcott St Manchester, CT USA Local Fax Empire Industries, Inc. EMPIRE I N D U S T R I E S I N C. Empire Industries Inc. is proud to present its new Engineering Catalog, Number 00. This catalog contains a complete line of pipe hangers, supports and related products.

More information

Interlocking Flyable LCD Video Wall System

Interlocking Flyable LCD Video Wall System Assemble and fly large concert quality and seamless video walls, quickly and securely using the Adaptive s load-rated modular LCD framing system for LCD monitors. Precision-machined connecting bars and

More information

PARTS LIST. explore 540

PARTS LIST. explore 540 explore 0 MODEL:0 0 MODEL: 0 KEY PARTS NO. NO. DESCRIPTION 0 0 0000 000 00 0000 00 0 00 0000 0 000 000 0000 000 00000 000 000 000 0000 0000 0000 000 0000 0000 00000 00 Face plate (unit) Face plate Thread

More information

x:panda Exploded views / Part lists

x:panda Exploded views / Part lists x:panda Exploded views / Part lists Rev. date 12.201 On the following pages you will find the parts used to assemble this product. Please note that some spare parts cannot be purchased individually but

More information

Wrought Iron Brochure

Wrought Iron Brochure Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541

More information

CS50 Chain Saw UT B Page 1 of 17 Accessories

CS50 Chain Saw UT B Page 1 of 17 Accessories CS50 Chain Saw UT-10710-B Page 1 of 17 Accessories CS50 Chain Saw UT-10710-B Page 2 of 17 Accessories A02177 1 BUMPER SPIKE KIT 7031099 1 S RUBBER TUBING (10') 18453 1 /P GREASE-Multi-Purpose (Sprocket

More information

Print Mechanism Maintenance Kit

Print Mechanism Maintenance Kit Print Mechanism Maintenance Kit Installation Instructions This kit includes the parts and documentation necessary to install the print mechanism maintenance kit in the following printers: ZT0 ZT0 ZT0 Read

More information

TYPE 4/12 PREMIER SERIES

TYPE 4/12 PREMIER SERIES Type 4 / 12 Enclosures TYPE 4/12 PREMIER SERIES ENCLO- Contemporary Contemporary Design Design Seamless Seamless Foam-In-Place Foam-In-Place Gasketing Gasketing Utility Utility Brackets Brackets for for

More information

1 AM-167/202/242/282/322 Parts Manual. Table Of Contents

1 AM-167/202/242/282/322 Parts Manual. Table Of Contents AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt

More information

LARGE S URGE-PROTECTOR S HELTER

LARGE S URGE-PROTECTOR S HELTER LARGE S URGE-PROTECTOR S HELTER The weather-resistant Large Surge-Protector Shelter (simply referred to as the shelter in this manual) provides protection from the elements for Surge Protectors (not included)

More information

Stairtreads and landings

Stairtreads and landings Stairtreads and landings Stairtreads and landing Weland manufactures straight stairtreads and landings from grating, slit plank type flooring and plank type flooring. The majority of the stairtreads and

More information