ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183

North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06

Kully Reference Book

Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe

Hot Rolled Steel Products. Contents

Hot Rolled Steel Products Contents Angles 2 Bar Gratg 3 Beams & Tees 4 Cap Rail 6 Channels 6 Expanded Metal 8 Flats & Strip 9 Floor Plate 12 Grip Step 13 Ladder Rung 13 Pipe 13 Plate 14 Rebar 14 Rounds

TILBURY STEEL SERVICE CENTRE

TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury

TWISTLOCKS - FLATBED TYPE RETRACTABLE

3 1/4" 825 MM MODEL 1101-1132 Ø4 3/4" 1205 MM 13/16" 20 MM 1110-4507 SPLIT ROLL 1109-1132-3 1101-1132-6 POSITIONER SHOWN IN POSITION FOR LEFT LOCKING 1109-1132-1 5 1/16" 128 MM 7 1/8" 181 MM 1105-1132-2

Index. E Expanded Metal Raised Flattened Grating... 93

Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...

Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...

Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...

CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX

CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX CARBON STEEL BARS Hot Rolled Rounds...3 Squares...4 Strip...4, 5 Flats...5, 6, 7, 8 COLD FINISHED Rounds - 1018...9, 10 Rounds - 1045...10

Reduces installation time Locks tray into position - no hardware required

Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and

BLACK & GALVANIZED SCH 40 STEEL NIPPLES

BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe

Livingston & Co., Inc Gallia St. Portsmouth, Ohio (740) (740) Open Monday - Friday 8:00-12:00 12:45-4:00

Livingston & Co., Inc. 2502 Gallia St. Portsmouth, Ohio 45662 (740) 353-0763 (740) 353-6008 Open Monday - Friday 8:00-12:00 12:45-4:00 www.livingstonrecycling.com New Steel Prices Angles Size/Inch Thickness

Call to Order! 1

Carbon Steel Stainless Steel ANGLES BEAMS CHANNELS Bar Angles...... Structural Angles.............., Junior Beams... Standard....... Wide Flange 7,,9, Standard...... MC Shapes- (Car, Ship and Junior)......,

wire guards PLAST D FUSERS FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guards / Fluorescent lighting fixture protection / Product Description:

Wire Guards FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guard units offer an inexpensive way to protect light fixtures from excessive abuse. Wire Guard units can be fabricated to fit most shapes of light

METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL

METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from

1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4

For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.

(618) FAX (618)

All STEEL PRODUCTS, Inc. Steel Pipe 1/8 through 120 O.D. Mechanical Squares & Rectangulars 1/2 thru 4 Square Equal Rectangulars Structural Squares & Rectangulars 1-1/2 thru 16 Square Equal Rectangulars

Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]

MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page

Metfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:

Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m

STEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED

STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3

Poly Slide, 40" Sheet 1 of 3

14125200 5 1 / 4 "/133 13 1 / 2 " 343 5 1 / 4 "/133 6'/1829 Minimum Use Zone PLAN VIEW/ FOOTING LAYOUT 26" 660 40" 24" 610 Right Side Frame 72 5 / 8 " 1845 See Dim. "A" 5 1 / 2 "/ 140 Left Side Frame Typical

Standard Product. Catalog Number. Width. Depth. mm 18 = = = = = = = = 400

Spec-01195 PROLINE G2 External Components Bases Gland Plate Gland plates are used with a plinth base to provide cable management solutions while maintaining a NEMA 12 rating. PROLINE G2 s unique Duro-Stand

Wrought Iron Brochure

Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541

Clamps with RUBBER BUSHING

Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example

Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.

Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43

The Gradient Control Mat (GCM)

The (GCM) Technical Literature INTRODUCTION The gradient control mat by Dairyland is designed to limit step and touch potentials due to lightning because such design will also keep step and touch potentials

T-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts

atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements

ANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS

EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed

Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart

Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance

Plate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.

Channels - Standard Structural* Grades Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue. A Depth B Flange Width C Web Thickness Estimated Weight - Lbs. Lbs/Foot

PO Box (fax)

4 Everts Avenue PO Box 208 Glens Falls, NY 280 800 8 998 8-9-008 (fax) www.henssgenhardware.com info@henssgenhardware.com 800 8 998 About Us - Snap Hooks & Pulleys Distributor Henssgen Hardware was established

PRECISION TOOLING CENTER. 160 Series IC Testing & Handling Tools PULL TEST PINS DAGE SERIES 24XX

PULL TEST PINS DAGE SERIES 24XX Type of Tool: 160 OT2 PTP - XX Material: Tungsten Wire, S/S 303 160-OT12-PTP-XX d±0.01 Foot Length Max (grams) Reference 160-OT2-PTP-01 0.025 (1) 0.125 (5) 10 HK-47-5-1

R-88 couplings should always be installed so that the coupling bolt pads make metal to metal contact.

R- O-01 MODEL R- RING JOINT COUPLING The Shurjot Model R- Rg Jot Couplg is an ideal pipe jog method when pipe is difficult to groove or when groovg is not the preferred jog method Available sizes to 9

KF to CFF Adapters. Samho Syscom Ent. / Varian, Inc. Vacuum Technologies. Outline Drawing

KF to CFF Adapters Ordering Information KF to CFF Adapters CFF Part CFF KF Flange Overall Length Tube ID Shipping Size Number OD NW Size OD A in. (mm) B in. (mm) Weight lbs. (kg) in. FA0NW6S. NW6.8.57

Channel,Half Slot,10ft

printed April 25, 2009 Channel,Half Slot,10ft Half Slot Channel, Length 10 Ft, Width 1 5/8 In, Depth 13/16 In, Cold Formed, Steel, 9/16 X 1 1/8 In Slot, Pregalvanized, 14 Gauge Grainger Item # 5YB80 Price

choice of types to suit many applications, from simple containers, tool boxes, industrial canister type vacuum cleanser, insulation

Solutions Inc. TL-7800 Line The DFCI TL-7800 Line of Toggle Latches offers the designer a wide choice of types to suit many applications, from simple containers, tool boxes, industrial canister type vacuum

Please Note: Special Size Standoffs to Order P.O.A

SECTION 2: GLASS FIXINGS INDEX Product Page Uncovered Counter Sunk Bushes - Black or White 2.1 Covered Counter Sunk Bushes - 304SSS Cap 2.2 Anchor Spanner 2.3 Button Head Fixings 2.4 Button Heads, Spacers,

Featured Products - RU Marking Standard on Hoffman brand

: Open Frame Racks CHAPTER Open frame racks are versatile solutions for mounting hubs, switches, routers and servers. Easy access to all sides simplifies maintenance and updates. Solidly constructed, Pentair

CLAMPS & SUPPORTS CATALOG

ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0

P143 Pressure Regulator

P Pressure Regulator Versatile ontrol Accuracy ompact esign Low Pressure ut-off The Type P pressure regulator is ideal for natural gas, air, propane and general purpose gas pressure regulation. Uses include

aluminium extrusions 2-8 stainlees steel bar and sections stainless steel seamless tube 24-25

contents aluminium extrusions 2-8 brass 9 - copper 4 - stainlees steel bar and sections 6-2 stainless steel seamless tube 24-2 stainless steel hygienic tube 26 stainless steel handrail tube 2 stainless

Titan Media Cart. Installation and Operation Manual

Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE

TYPE 4/12 PREMIER SERIES

Type 4 / 12 Enclosures TYPE 4/12 PREMIER SERIES ENCLO- Contemporary Contemporary Design Design Seamless Seamless Foam-In-Place Foam-In-Place Gasketing Gasketing Utility Utility Brackets Brackets for for

Compact Inductive Proximity Sensor

SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter

Ideal protection for your electrics: häwa cable ducts

Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in

Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global

8 PHOTO PHOTO MEASURE Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F- Glossary of terms... P.576~ panasonic.net/id/pidsx/global guide... P.78~ General

GX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available

8 Cylindrical Compact Inductive Proximity SERIES Related Information General terms and conditions... F-7 Glossary of terms... P.86~ selection guide... P.757~ General precautions... P.05 PHOTO PHOTO Conforming

SHELVING 45 AND TYRE RACKS

AND TYRE RACKS AND TYRE RACKS Particularly suitable for the storage of heavy and bulky materials (cannot be used as a pallet rack). Made entirely of certified first grade steel sheet and profiled with

* 28" 2'-0" NUT ROUTED 6" x 8" WOOD BLOCK GROUND LINE SHEET APPROVED BY: DIRECTOR, BUREAU OF DEVELOPMENT DATE: VERT.

6'-" 2 3'- WITH WITH 6'-" 2 2'- EFFECTIVE AND TYPICAL 3'- WITH ROUND 6'-" 2 TOE NAIL BLOCK TO POST WITH A MINIMUM LONG HOT-DIP ZINC COATED NAIL x OFFSET BLOCK 3'- x LINE POST * 2 x LINE POST * 2 OPTIONAL

2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT

2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT B1 1695 2200 0 10 set by hand or by optional RCU (Remote Control Unit) X 65 2-Port Antenna 1695 2200 65 18dBi 0 10 T Type No. 742215V01

TDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit

TDQ612075-K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit Ex GST Inc GST $3,290.00 $3,619.00 ORDER CODE: MODEL: Type: W07705 TDQ612075-K1 Rhino Cart

PNEUMATIC CONVEYING COMPONENTS

PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS A HIGH-PERFORMANCE COMPANY H-P Products is certified to ISO 9001:2008 welcome to h-p products! H-P Products specializes in supplying

MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM

IAB INSTRUCTION MANUAL MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM Required Tools Drill with 5/16 Drill Bit MIDSIZE VEHIGLES M1105 50 [ ] M1100 60 [ ] M1150 72 [ ] M2105 50

Lineal SPECIFICATIONS: LED Luminaire STRUCTURA INC. FIXTURE TYPE: PROJECT NAME:

LED Luminaire FIXTURE TYPE: PROJECT NAME: Lineal mounted on Structura Tilt pole. SPECIFICATIONS: CONSTRUCTION: Seamless aluminum housing comprised of 6005A- T61 extrusion and 6061-T6 end plates. Gasketed

Panel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet

Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous

Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.

Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................

#24.P20: Pull mechanism backset 20 mm, 25 mm and 30 mm 3/4"; 1 and 1 3/16 Thread size: M 4 KNOB NOT INCLUDED FOR ILLUSTRATION PURPOSES ONLY

Izerwaren Order # Pull mechanism for Cabinet Doors (slam latch type) Mechanism made of aluminum with brass parts. Silver or black finish Standard: 34 inch thick doors Backset: 19, 25, 30 mm or more Custom

Specifications. S&C Loadbuster Disconnect Switches Outdoor Distribution (14.4 kv through 34.5 kv)

Outdoor Distribution ( kv through 34.5 kv) Specifications Conditions of Sale STANDARD: Seller s standard conditions of sale set forth in Price Sheet 150 apply. SPECIAL TO THIS PRODUCT: INCLUSIONS: All

Fixings for Mobile Radio Base Stations

Fixings for Mobile Radio Base Stations Clamps Cleats Accessories Fixings for Mobile Radio Base Stations The Telegärtner Group is now pleased to include cable clamps and cleats to extend its portfolio of

600 Series Databook. HOME MOTION by

600 Series Databook HOME MOTION by Somfy is the leading global manufacturer of strong, intelligent, quiet motors and electronic controls for interior and exterior window coverings with more than 110 million

TWIN Series Clamps. DIN 3015, Part 3. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32

TWIN eries Clamps IN 3015, Part 3 twin series clamps Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32 Order s PIPE CAMP MARIA (two clamp halves) ingle weld plate P

AIR TERMINALS: COPPER

AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM

Com-Tray. Under Floor. Labor-saving assembly Field proven and tested Superior construction Shipped ready to assemble

Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting

4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT

4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710

Table of Contents: Pressure Vessel Codes & Registrations: Manufacturing Capabilities: Engineering Capabilities: Paint Specifications:

Pressure Vessel Codes & Registrations: The items listed in this catalog have been designed and constructed in accordance with the ASME Section VIII Division I Code latest edition and are registered with

PureFlow Zero Lead PEX manifold plumbing systems Number one rated PEX plumbing manifolds

PureFlow PureFlow PureFlow Zero Lead PEX manifold plumbing systems Number one rated PEX plumbing manifolds 119 Stock Qty Approx. Zero Lead PEX Manifold Plumbing Systems ZERO LEAD MANABLOC -COMPRESSION

EXTRUDER SCREENS. Pure Performance... For Plastic & Rubber Extrusion Industries. Absolute Precision!!

EXTRUDER SCREENS For Plastic & Rubber Extrusion Industries Pure Performance... Absolute Precision!! www.ganeshwiremesh.com Company Overview Ganesh Corporation, as our company is growing, expanding & preparing

metric conversion factors

metric conversion factors ENGLISH TO METRI MULTIPLY Y TO OTIN Pounds (avoirdupois).45359 Kilograms Net Tons (2000 lbs).90718 Metric Tons Gross Tons (2240 lbs) 1.01605 Metric Tons 25.4001 Millimeters Feet.304801

WIRE AND CABLE MANAGEMENT

Wire and Cable Management Solutions A variety of items are available for managing and organizing wire and cable in common systems and cabinet environments. From cable rack, auxiliary framing to network

060-Hardware. Clamps and Brackets Hose Clamps

Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

ROLLING COUNTER SHUTTERS

500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings

STEEL NIPPLES BLACK BRASS & GALVANIZED FITTINGSSCH 40

1/8" DIMETER STEEL NIPPLES BLCK BRSS & GLVNIZED SCH 40 Length Box/Case pprox. Galv 56-001 1.89 X Close (3/4") 5/600 0.02 57-001 1.34 56-002 1.95 x 1-1/2" 5/600 0.03 57-002 1.51 56-003 2.19 x 2" 5/600 0.04

CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - locking trays PRODUKTINFORMATION

C B L E S N I T T I O N CBLE ROUTING SYSTEMS WIRE CBLE TRYS - locking trays PRODUKTINFORMTION Table of Contents. Locking Cable Trays S20 - S22N, S121-S123.... Pgs 4-5 Locking Cable Trays K25 - K91... Pgs

Channels and Bracketery

Channels and Bracketery Channel Sections and Cantilever Arms CSS1/ CSS1/ CSS1/ CSS1/ CSS1 CSS1 CS1/ CS1/ CS1/-HDG CS1/-SS CS1/ CS1/ CS1/-HDG CS1/-HDG CS1/-SS CSL1 Material thickness: 1.mm Weight: 1.1 kg/m

Catalogue. electric-, cordless- and. pneumatic power tools. Products for sheet metal processing Edition 2008 / 2009

Catalogue electric-, cordless- and pneumatic power tools Products for sheet metal processing Edition 2008 / 2009 Machine Tools / Power Tools Laser Technology / Electronics Medical Technology TRUMPF nibblers:

The Gradient Control Mat (GCM)

LWYS RUGGED. LWYS RELIBLE. The Gradient Control Mat (GCM) Technical Literature INTRODUCTION The gradient control mat by Dairyland is designed to limit step and touch potentials due to lightning because

TWIN SERIES CLAMPS. TWIN Series Clamps. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32

TWIN eries Clamps TWIN ERIE CAMP Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32 PIPE CAMP - TWIN ERIE Order s PIPE CAMP MARIA PP: Polypropylene material Colour Blue

MBE Mounts and Adapters

MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking

Standard Trackstar material. FDA/USDA approved material. Improved wear resistance and reduced thermal expansion Available in all colors except white

2 The Advantage Fight friction and reduce costs with long-wearing Trackstar UHMW Belt and Chain Guides. Available from stock, Fenner Drives offers the widest range of standard profiles for use in guiding

Pipe fittings and flanges, sockets for bayonet locks

Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing

3630P Encl 34X28 Enclosure Panel. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions

3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 3630P Encl 34X28 Enclosure Panel Cooper B-Line/Cable Tray Manufacturer Weight per unit Product Category Features Material

BUILT RIGHT - PRICED RIGHT BUILT RIGHT - PRICED RIGHT. SEALERS w/hot wire seal systems EASTEY SEALER SPECIFICATIONS

EASTEY SEALER SPECIFICATIONS EM-T SERIES: MANUAL L-Sealer with powered takeaway conveyor, magnet clamping, cycle timing, pin perf, film clamps, base and spare parts. MACHINE POWER REQUIREMENTS SEAL DIMENSIONS

Ground Power Modules. And Accessories For Healthcare Facilities. Technical Bulletin NAE /

2 Ground Power Modules And Accessories For Healthcare Facilities Technical Bulletin NAE2092320 / 10.2011 Ground Power Modules Hospital grade outlet modules Introduction BENDER series GPM ground and power

Thread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm

Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information

Hose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER

We offer hose menders in a variety of materials to suit the products being conveyed. Hose Part Hose PRICE EACH Pkg Part Hose PRICE EACH Pkg G20S PLATED STEEL HOSE MENDER G20S-038 3 8" $ 2.30 $ 2.10 5 G20S-050

T&B Cable Tray. Metallic Channel Tray. Accessories. Standard 1.5 in. Splice Plate. Standard Splice Plate. Expansion Splice Plate

Standard 1.5 in. Splice Plate (Prefix)-W-01-CCS 1.5 Supplied standard with each length. Including hardware, 2 bolts, 2 washers 3/8 in. diameter. Standard Splice Plate (Prefix)-W-03-CCS 3 (Prefix)-W-04-CCS

- (800)

The Hardware Makes the Difference 906 TOILET PARTITION HARDWARE www.airdelights.com/jacknob - (800)-440-5556 CONTENTS PAGE ALCOVE CLIPS...24 ANCHORS...21 ANGLE BRACKETS...10, 11, 12 CAMS...23 CURTAIN RODS

THD / THDH Face Mount Hangers

EP angers T / T Face Mount angers T Medium capacity hanger for LVL, LSL, and PSL beams. T eavy capacity hanger for LVL, LSL, and PSL beams. Materials: See EP Face Mount angers charts, pages 147-148. Op

Table Of Contents. Tyson Gentz General Manager Electrical Services of Arizona. Training & Consulting. Custom Fabrication. Temporary Power Stations 4

Thank you for your interest in Electrical Services of Arizona. ESA s mission is two-fold. Through our service offerings we help customers be more competitive. In our products areas, we offer competitive

Singlemode SC Connector Kits Polymer Crimp Body. Housing Boot. 3.0 mm Jacketed. Simplex Blue Blue. Duplex Blue Blue

One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules For 125 µm cladding diameter

lindab duct suspension & support system Duct suspensions & Support systems

Duct suspensions & Support systems Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH0... 0 Threaded rod OSB 0...0 DRSN... 0 DRSNR... 0 Channels and channel brackets

standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability

Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)

CONCEPT Stainless Steel Wall-Mount Enclosures

CONCEPT Stainless Steel Wall-Mount Finish are unpainted. Door and body have smooth #4 brushed finish. Optional CONCEPT panels are white painted or zinc-plated. Optional NEMA panels are white painted, zinc-plated,

GV-EL124S Electric Strike

GV-EL124S Electric Strike Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but it is field convertible from fail secure to fail safe. It can be mounted either

Now Available through: Security Slot Anti-Theft Packages Security Loop Anti-Theft Packages Case Screw Anti-Theft Package

Now Available through: NoN-ADhesive s s Security Slot s Security Loop s Case Screw Convenience. Support. Security. The PC Guardian ADVANTAGE Flexible and expandable s provide all-in-one solutions for a

STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...

STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...

Type 4 Disconnect Enclosures

143 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed to work in a wide range of environments indoors or outdoors, and will house most standard types of disconnects

Adjust-O Magnet Squares

Adjust-O Magnet Squares The original magnet squares featuring On/Off switches. Patent No. US 7,009,480 B2 Adjust-O Magnet Squares The On/Off switch HEAVY DUTY HEAVY DUTY MSA45 MSA48-HD MSA53-HD Multiple

Precision temperature control/sensing

PROBE TEMPERATURE SENSORS TE200 Series Precision temperature control/sensing FEATURES: Thermistor or Precision RTD Various configurations available Selection of enclosures Custom laser etching available