Nominal Dimensions for Reaming Shells
|
|
- Philip McKinney
- 6 years ago
- Views:
Transcription
1 Nominal Dimensions for s Notes 1. The dimensions given in this document are nominal. That is, they represent the mid-point dimension onto which a manufacturing tolerance is applied. This tolerance varies by reaming shell size and conforms to established industry standards. In addition to reaming shells with standard outside set diameters on their diamond-set gauge rings, Dimatec also offers a limited range of reaming shells with industry standard oversize outside set diameters for special applications. 2. Dimatec is capable of manufacturing any reaming shell listed in the following tables. Reaming shell sizes that are not listed or reaming shells with non-standard set diameters may be available on request. 3. Note that optional hard-metal strips on the steel body may not be available on some sizes of reaming shells due to physical dimensional limitations. Wireline s: Standard Length AWL AWLTK ATW (AGM) BWL BWLTK BTW (BGM) NWL NTW (NGM) 76HD HWL HTW 101HD PWL mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch Page 1 of 7
2 Dimatec Inc. Nominal Dimensions for s Wireline s: Long-Ring Type BWL BWLTK BTW (BGM) NWL NTW (NGM) HWL B mm 89.2 mm inch 3.51 inch mm 89.2 mm inch 3.51 inch mm 89.2 mm inch 3.51 inch 91.2 mm inch 3.59 inch 91.2 mm inch 3.59 inch mm mm 91.2 mm inch inch 3.59 inch T, TT and T2-Series Metric s T36 TEW TT46 T2-46 TAW TT56 T2-56 TBW T2-66 TNW T2-76 T2-86 T mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch Page 2 of 7
3 Dimatec Inc. Nominal Dimensions for s T6-Series Metric s T6-76 T6-86 T6-H T6-101 T6-116 T6-131 T mm inch mm inch mm inch mm inch mm inch mm inch WL-Series s For metric wireline core barrel system WL56/39 WL56/42 WL66 WL mm inch mm inch mm inch mm inch s for Directional Drilling DeviDrill WL76 (N-Devico) mm inch Page 3 of 7
4 Dimatec Inc. Nominal Dimensions for s Miscellaneous s LTK48 LTK60 NMLC ATK34 (AW34) JKT48 NWD4 Geobor-S mm inch mm inch I-Series s IEW IEWS IAW IAWS Backend Reamers Used in place of an Adapter Coupling in a wireline core barrel system Backend Reamer NWL HWL mm inch mm inch Page 4 of 7
5 Dimatec Inc. Nominal Dimensions for s B-Series Metric s As per the ISO standard B36 B46 B56 B66 B76 B86 B101 B116 B131 B mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch WG-Series s For use with double tube or single tube core barrels EWG AWG BWG NWG HWG There are physical and dimensional differences between the double tube and single tube designs. When ordering, please specify whether the double tube or single tube type is required. Page 5 of 7
6 Dimatec Inc. Nominal Dimensions for s WF-Series s HWF PWF SWF mm inch mm inch WM-Series s EWM AWM BWM NWM WT-Series s For use with double tube core barrels EWT (EXT) AWT (AXT) BWT NWT HWT Page 6 of 7
7 Dimatec Inc. Nominal Dimensions for s s for Large Diameter DCDMA Core Barrels 2-3/4 x 3-7/8 4 x 5-1/2 6 x 7-3/ mm inch mm inch mm inch Strips Available? Technical Data Sheet TD102 Revision 4 Document Release Date: March 12, 2013 The technical application data in this document is intended as a basic guideline for the selection of the appropriate tools for your job. As drilling conditions and the capabilities of drilling equipment vary considerably from site to site, it is impossible to define absolute parameters for the application of our drilling tools. Some experimentation on the part of the end user may be required as parameters outside of those recommended in Dimatec s product literature may be applicable. Every effort has been made to ensure the accuracy of the data contained in this document. Dimatec Inc. cannot accept any liability due to errors or omissions in the data that we provide. Dimatec Inc. is constantly working to improve our products and therefore reserve the right to make changes to materials, specifications, prices and technical data without prior notice. Dimatec Inc. 180 Cree Crescent Winnipeg, Manitoba, Canada R3J 3W1 Telephone: Toll-Free (Canada and US) or (204) Fax: (204) info@dimatec.com Website: Page 7 of 7
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationKully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
More informationP R I C E G U I D E & C A T A L O www.trianglereamer.com G N O. 1 0 0 9 www.trianglereamer.com 103 Gonyeau Road Milton, Vermont 05468 E-mail: reamers@trianglemetalfab.com Phone: 1-802-893-1581 Fax: 1-802-893-1814
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3014
CABLE DRAWING: DRAWING TITLE: ATIM-T Power Cable POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3014 DRAWING NO.: MWACAB-0014
More informationQUALITY PRODUCTS, COMPETITIVE PRICING AND SERVICE BEYOND YOUR EXPECTATIONS Phone (408) Fax (408)
Product Overview Vacuum Components & Bellows Pages 2-6 SSL NW/KF components are a system of stainless steel vacuum flanges for tube sizes from 3/4" through 2" OD. These flanges can operate in high vacuum
More informationmeaden Special Shaped Punches & Dies Information English Version
Special Shaped Punches & Dies Information English Version 210 West 83rd Street Burr Ridge, Illinois 60521 Telephone: 630/655-0888 FAX: 630/655-3012 Internet www.printing.com How to Order Specials Clearance.515"
More informationCONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX CARBON STEEL BARS Hot Rolled Rounds...3 Squares...4 Strip...4, 5 Flats...5, 6, 7, 8 COLD FINISHED Rounds - 1018...9, 10 Rounds - 1045...10
More information(618) FAX (618)
All STEEL PRODUCTS, Inc. Steel Pipe 1/8 through 120 O.D. Mechanical Squares & Rectangulars 1/2 thru 4 Square Equal Rectangulars Structural Squares & Rectangulars 1-1/2 thru 16 Square Equal Rectangulars
More informationROCKTOOLS Rock drilling tools for better value
Rocktools Catalogue HELSO OY ROCKTOOLS Rock drilling tools for better value www.helso.fi QUALITY BITS FOR BETTER VALUE Helso Oy, a company dealing in rock drilling tools, is located in the capital area
More informationFrame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe
W Series 143T-447T - TEFC Heavy Duty Construction Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe Single Phase 56/56C : RF - Removable Feet TM - Thermistors
More informationCompliance with API Standard 670 the PRO Product Standard for Proximity Probes
Connection Technology Center, Inc. 7939 Rae Boulevard Victor, New York 14564 Toll Free: (800) 999-5290 Phone: (585) 924-5900 Fax: (585) 924-4680 Compliance with API Standard 670 the PRO Product Standard
More informationFCC17 Series FILTERED D-SUB CONNECTORS
Specifications FCC17 Series Filter Characteristics: See Page 2 Electrical Data: See Page 2 Material and Finishes: See Page 3 Environmental Data: See Page 3 UL File # : E135615 CSA File # : LR68598 These
More informationNorth US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
More informationModular PCB terminal block; 2 solder pins/pole; 1-pole; pin spacing 5/5.08 mm / 0.2 in; with push-button
push-button - Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole; pin spacing 5/508 mm / 02 in; with push-button Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole;
More informationDCT 531. Industrial Pressure Transmitter with RS485 Modbus RTU. Stainless Steel Sensor
DCT 5 Industrial Pressure Transmitter with RS85 Modbus RTU Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar output
More informationDMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
More informationDisplays, Cabinets & Indexes
Displays, Cabinets & Indexes Counter Displays Annular Cutter................. 134 Reamers Type 50-AG & Type 51-AG.. 133 Silver & Deming................ 133 Stock Master Dispensers & Displays Type 925 300pc.
More informationDouble and triple-headed push buttons Harmony
Double and triple-headed push buttons Harmony Catalog May 2010 Gain in selection, simplicity and robustness As a world leader in control and signalling components, Schneider Electric continues its policy
More informationDisplays, Cabinets & Indexes
Annular Cutter Sets... 134 Counter Displays Annular Cutter... 133 Reamers Type 50-UB & Type 51-UB.. 134 Silver & Deming.... 133 Stock Master Dispensers & Displays Type 925 300pcs. Fractional... 132 Display
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationare graded into grades according to mean grading deviation of the nominal ball diameter in the lot D wm Balls
Rolling Elements Balls Balls as a rolling bearing component are made of the same material as bearing rings. The material hardness after processing (hardening) is 61 to 65 HRC. Balls with diameter = 3.175
More informationUHV Feedthrough, Conflat compatible flange. UHV female cable assembly, , PEEK connector and Kapton insulated coaxial
Coax-D Subminiature-D Coax-D Subminiature-D Accu-Glass 1, 3 and 5 Pin Feedthroughs UHV Feedthrough, 100520 Conflat compatible flange UHV female cable assembly, 100640, PEEK connector and Kapton insulated
More informationInstallation Notes TII Model 341 Protector
Installation Notes TII Model 341 Protector (ATT-IS PEC 32918) for MERLIN Communications System In Range Out of Building (IROB) Station Installation By Trained Technician Only WARNING: Failure to follow
More information7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
More informationUSER MANUAL 1. REGISTRATION
USER MANUAL 1. REGISTRATION I 2. LOGIN I PRE-SETTING CAD FORMATS I 4. HOW DO I FIND THE RIGHT COUPLING? I 5. CONNECTION DIMENSIONS I 6. OFFER DRAWING I 7. GENERATING AND DOWNLOADING A CAD MODEL I 8. LOGOUT
More informationHarmony Double and Triple- Headed Push Buttons. Catalog
Harmony Double and Triple- Headed Push Buttons Catalog 2011 Improved selection, simplicity and robustness As a world leader in control and signaling components, Schneider Electric continues to innovate
More informationTel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.. / 00..0 (USA & CANADA) / Email sales@msdiscounttool.com FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute
More informationRADIAL LEADED POWER INDUCTOR SERIES PR
RADIA EADED POWER INDUCTOR SERIES PR EECTRICA CHARACTERISTICS - Inductance range PR4X6 μh to 0μH PR6X8 μh to 0μH PR8X μh to 000μH PRX6 uh to 00uH PRX8 uh to 00uH PRX uh to 00uH PRX14 μh to 000μH PRX6 uh
More informationPOSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3011
CABLE DRAWING: POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650 MWA-3011 DRAWING TITLE: 5V & 12V Power Distribution Cable DRAWING
More informationLimit Switch Connectors
CSM_LimitSwitch DS_E s (SC Series) Cabtire cables and flexible tubes with various diameters are used to connect machine tools and controllers with Limit Switches. To ensure the watertightness of the edges
More informationSecoroc Rock Drilling Tools. Product catalogue Tophammer equipment
Secoroc Rock Drilling Tools Product catalogue Tophammer equipment Contents Page Integral drill rods 4 Plug hole rods 5 Tapered drill steel equipment 6 Drifting 11 Bench and production drilling 27 Shank
More informationINSTALL INSTRUCTIONS RSXMR-9886-P-48
INSTALL INSTRUCTIONS RSXMR-9886-P-48 Installation Instructions RSXMR-9886-P-48 (CEQ. 20194) INSTALL INSTRUCTIONS RSXMR-9886-P-48 Contents Section Description Page 1 Copyright 2 1.1 Disclaimer 2 1.2 Warnings
More informationD-2000 Quick Opening Closures
D-2000 Quick Opening Closures s: 4-inch and larger Bulletin No: 50.003.04 Version:.2017 Cross Indexing No: n/a Supercedes: 50.003.03 (01.20) Options Description T.D. Williamson, Inc. s Clamp Ring Closures
More informationAT&T INDIANA GUIDEBOOK. PART 8 - Miscellaneous Services 2nd Revised Sheet 1 SECTION 2 - Call Restriction Services
PART 8 - Miscellaneous Services 2nd Revised Sheet 1 900/976 CALL BLOCKING The Telephone Company shall offer free 900 or 976 blocking on all initial 900 or 976 service disputes and inquiries. In addition,
More informationCAPTO. Switzerland. Made in. Swiss Precision Tools
CAPTO Made in Switzerland Swiss Precision Tools REGO-FIX CAPTO Toolholders As a Certified Sandvik CAPTO manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most
More informationSpecification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads
Specification for Threading, Gauging and Thread Inspection of Casing, Tubing, and Line Pipe Threads API SPECIFICATION 5B FIFTEENTH EDITION, APRIL 2008 EFFECTIVE DATE: OCTOBER 1, 2008 Specification for
More informationFeatures Benefits. Collets. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and size (reduced collet selection errors).
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO 14001. 1 1 Marking Type and size (reduced collet selection errors). Traceability Lot number marking on all products
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-55302/75D 22 August 2016 SUPERSEDING MIL-DTL-55302/75D w/amendment 1 26 July 2010 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET RECEPTACLE,
More informationC-POWER AC AUTOMATIC CONTROL
Issue 1 Print 1 C-POWER AC AUTOMATIC CONTROL INSTALLATION INSTRUCTIONS & OWNER S MANUAL Model: 93 ACMC100I A Charles Industries, Ltd. All rights reserved. Printed in the United States of America. Issue
More informationEthernet Media. Technical Data. Cable Spools 2. Cordsets & Patchcords 5. Patchcords & Field Attachables 12
Technical Data Ethernet Media Bulletin Numbers 585, 585A, 585BP, 585BT, 585BX, 585BZ, 585D, 585J Topic Page Cable Spools Cordsets & Patchcords 5 Patchcords & Field Attachables Cable Spools Unshielded Twisted
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
FRACTIONAL SIZES STRAIGHT SHANK SERIES 0: STRAIGHT FLUTE SERIES : SPIRAL FLUTE (RH) Straight Flute Spiral Flute Flute Overal Spiral Size Length Length Flute / / / 00 00 / / / 00 00 / / 00 000 / / 00 000
More informationLimit Switch Connectors
CSM_LimitSwitch_Connector_DS_E Connectors (SC Series) Cabtire cables and flexible tubes with various diameters are used to connect machine tools and controllers with Limit Switches. To ensure the watertightness
More informationSMDA05C-7 THRU SMDA24C-7
Description The SMDAxxC-7 series of transient voltage suppressors are designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Jan. 23, 2017 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 21.04 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationCopper Fittings: Wrot Pressure
Phone: (877) 515-4522 Dated: Feb. 9, 2015 Fax: (877) 595-4522 Copper Fittings: Wrot Pressure Male Adapter C X M Female Adapter C X F HL15-101-0001 1/8 1/4 x 1/8 19.36 25 3000 HL15-105-0001 1/8 1/4 x 1/8
More informationConnections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL
Connections Catalog WIDEST SIZE RANGE ALL ALLOYS VAST INVENTORY QUICK TURNAROUND CAPABILITY AVL APPROVAL CUSTOM SOLUTIONS GLOBAL AVAILABILITY BROAD PRODUCTION CAPABILITY FULL PRODUCT TESTING About AFGlobal
More informationIndex. E Expanded Metal Raised Flattened Grating... 93
Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...
More informationInstalling the Camera
CHAPTER 2 This chapter provides information and instructions for installing the Cisco Video Surveillance PTZ IP camera, and includes the following topics: Installation Guidelines, page 2-1 Warnings Before
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 61754-18 First edition 2001-12 Fibre optic connector interfaces Part 18: Type MT-RJ connector family Interfaces de connecteurs pour fibres optiques Partie 18: Famille de connecteurs
More informationCall to Order! 1
Carbon Steel Stainless Steel ANGLES BEAMS CHANNELS Bar Angles...... Structural Angles.............., Junior Beams... Standard....... Wide Flange 7,,9, Standard...... MC Shapes- (Car, Ship and Junior)......,
More informationRCMB20/RCMB Series
4 T M /-500 Series Integratable Ground Fault Monitoring Modules For Integration Into Frequency Converters and Combiner Boxes Technical Bulletin NAE1042510 / 10.2012 BENDER Inc. 700 Fox Chase, Coatesville
More informationRotary version, three-position control
4 622 Residential Air damper actuators GXD..31.1 Rotary version, three-position control Electric motor-driven actuators for three-position control 1.5 Nm nominal torque AC 24 V or AC 230 V rated voltage
More informationRAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES RESOURCE VALUE. (888)
RAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES The raw material that is used to manufacture your tool is just as important as the design of the tool itself. By using inferior materials, the tool life
More informationFAG PowerTherm HEATER HEATER.PLATE. Bench top devices for heating rotationally symmetric parts. A Member of the Schaeffler Group
FAG PowerTherm.PLATE Bench top devices for heating rotationally symmetric parts A Member of the Schaeffler Group FAG PowerTherm Correct mounting helps prevent damage over time Heating? Many rolling bearings
More information. PHONE. Local: +1 (718) Toll Free: +1 (888)
S E A L I N G S Y S T E M S F O R D O O R S BOOK #19 CONTACT US Visit our website for all cut sheet and installation instruction downloads, product updates and more! EMAIL PHONE Local: Toll Free: +1 (888)
More informationBLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
More informationUltrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training
Ultrasonic Calibration Blocks & Welded Flawed Specimens for NDE Training Ultrasonic Calibration Blocks Custom blocks available upon request All blocks are available in metric/ inch dimensions Standard
More informationTemperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationAPI Gaging Practice. PMC Lone Star Technical Brief Doc. 100 Rev. B
API Gaging Practice Doc. 100 Rev. B David R. Maisch Chief Engineer June 4, 2008 The American Petroleum Institute (API), headquartered in Washington, DC, USA is a world leader in the development of standards
More informationUltraGrip PE & PVC Connections & Repairs
Next Generation UltraGrip PE & PVC Connections & Repairs NOW AVAILABLE UP TO DN600 PIONEERS IN PIPE SOLUTIONS UltraGrip Overview Ideal for PE & PVC Pipe Connections & Transitions Pipe Materials UltraGrip
More information1450 First Ave. Page 1 of 7 Chippewa Falls, WI (800) or (715) Fax: (715)
1450 First Ave. Page 1 of 7 Model DA30 User Manual 1450 First Ave. Page 2 of 7 Warranty This product is fully warranted against defective materials and/or workmanship for a period of one year after purchase,
More informationSIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
More informationQuality Assured. INDENTRON 400 Series Digital Rockwell Testing System. Newage Hardness Testing
INDENTRON 400 Series Digital Rockwell Testing System Specification Sheet SS-NI400-0310 March 2010 The INDENTRON Series hardness testers feature an innovative cantilevered indenter configuration that eliminates
More informationSocket Head Cap Screw Metric
1 2 0 0 M2 WRENCH 1.mm 11 1 1 1 1 21 0 Pcs 1, 0 0 0 00 00 00 00 00 00 00 00 WRENCH 2mm 11 1 1 1 0 Pcs 0 0 0 00 00 00 00 00 WRENCH 2.mm 21 002 11 00 00 1 0 01 21 002 000 0 Pcs 1 0 2 0 00 00 00 00 00 00
More informationMACHINE TOOL ACCESSORIES
MACHINE TOOL ACCESSORIES ISO TOOLHOLDERS FOR CNC ROUTERS 33-70 Note: Measure the A dimension with the collet in the nut. Dimensions in Millimeters COLLET PULL STUD DESCRIPTION D A F N NUT WRENCH PROVIDED
More informationERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins
More informationStandard Releasing Spear. Manual B215
Standard Releasing Spear Manual B215 NOTES Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type
More informationSide block mm Combination element to extend or to combine two stoppers
Clamping tools 45 5D workpiece stopper Side block 10-18 mm Combination element to extend or to combine two stoppers Application: One of the various application of the workpiece stopper is as a versatile
More informationBimetal spiral. Graduation: Scale angle Over-temperatures (occasionally allowed) Pointer. Dial. Accuracy (according to EN 13190) Class 1
Technical Datasheet GB Series With rigid or every angle stem Watertight casing stainless steel execution NS 100-125 - 150 Indication ranges included between -50 to + C Execution B made with traditional
More information3M Roloc Discs and Disc Sanders. Simply the. Right Angle Solution
3M Roloc Discs and Disc Sanders Simply the Right Angle Solution Choose the Right Right Angle System Having the right tool system for the job is a powerful feeling. You ll feel that power when you combine
More informationCITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES
CITY OF FREMONT SPECIFICATIONS 2017 WATER & SEWER MAINTENANCE SUPPLIES All bidders MUST submit product specifications, literature describing items, manufacturers name, product code and part numbers with
More informationP027 Series Pressure Transducer Installation & Operation Manual
trans metrics, Division of United Electric Controls P027 Series Pressure Transducer Installation & Operation Manual 5325 Naiman Parkway Solon, Ohio 44139 Phone: 440-248-2229 Fax: 440-248-7780 www.trans-metrics.com
More informationInstalling a Power over Ethernet injector
Installing a Power over Ethernet injector AlphaEclipse StreetSmart and RoadStar signs The instructions in this document explain how to install/replace a Power over Ethernet (PoE) injector in a StreetSmart
More informationMACHINE TOOL STYLUS CATALOG
JULY FEBUARY 201 201 MACHINE TOOL STYLUS CATALOG Use Q-Mark PROBE STYLI ABOUT THIS CATALOG This catalog contains part numbers, descriptions, and prices for our machine tool styli. Unless otherwise noted,
More information3M Roloc Discs and Disc Sanders. Simply the. Right Angle Solution. Distributed by:
3M Roloc Discs and Disc Sanders Simply the Right Angle Solution Distributed by: Choose the Right Right Angle System Having the right tool system for the job is a powerful feeling. You ll feel that power
More information3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.
More informationDD1590 Series Proximity Driver. Connection Technology Center, Inc. Vibration Analysis Hardware. DD1590 Series. Proximity Probe Driver.
Connection Technology Center, Inc. Vibration Analysis Hardware DD1590 Series Proximity Probe Driver Product Manual C:\Documents and Settings\mclarneys.ctc\Desktop\MNX10016 DD1590 PROXIMITY PROBE Manual.doc
More informationA STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION)
A STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER 6668584 U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION) UNILOCK U ABOVE GOLD JEWELRY APPLICATION (11) UNILOCK (The Ultimate Jewelry Element
More informationXL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
More informationRClamp1502B. Ultra-Low Capacitance TVS for ESD and CDE Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamps are ultra low capacitance TS arrays designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/68B 29 June 2009 SUPERSEDING MIL-C-83723/68A (USAF) 17 December 1991 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PLUG, THREADED COUPLING,
More informationACCURACY MODELING OF THE 120MM M256 GUN AS A FUNCTION OF BORE CENTERLINE PROFILE
1 ACCURACY MODELING OF THE 120MM M256 GUN AS A FUNCTION OF BORE CENTERLINE BRIEFING FOR THE GUNS, AMMUNITION, ROCKETS & MISSILES SYMPOSIUM - 25-29 APRIL 2005 RONALD G. GAST, PhD, P.E. SPECIAL PROJECTS
More informationDETAIL SPECIFICATION SHEET
INCH-POUND 22 August 2016 SUPERSEDING w/amendment1 26 July 2010 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET ENVIRONMENTAL RESISTANT, RECEPTACLE, ELECTRICAL,
More informationBENCHMIKE PRO NEW. The Industry s leading off-line diameter & ovality measurement system
BENCHMIKE PRO NEW The Industry s leading off-line diameter & ovality measurement system Industry s leading sample inspection system Measure manufactured cut samples fast and with the highest accuracy in
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0317)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0317) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0118)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationEthernet Media. Technical Data. Cable Spools 2. Cordsets & Patchcords 5. Patchcords & Field Attachables 10
Technical Data Ethernet Media Bulletin Numbers 585, 585A, 585BP, 585BT, 585BX, 585BZ, 585D, 585J Topic Page Cable Spools Cordsets & Patchcords 5 Patchcords & Field Attachables 0 Cable Spools Unshielded
More informationA STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION)
A STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER 6668584 U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION) UNILOCK U FLUSH INTO CERAMIC JEWELRY APPLICATION (8) UNILOCK (The Ultimate Jewelry
More informationTIONS INSTRUC TION A RECONSTRUCTION NAIL OPER
RECONSTRUCTION NIL O P E R T I O N I N S T R U C T I O N S Surgical Technique Reconstruction nail Surgical Technique 1 6 Reconstruction nail 7 14 Recommended line-up 15 Instrumentation 16 Indication of
More informationA STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION)
A STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER 6668584 U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION) UNILOCK U FLUSH OR ABOVE WOOD, PLASTIC, COMPOSITES ETC. APPLICATION (24) UNILOCK
More informationVisionGauge OnLine Spec Sheet
VisionGauge OnLine Spec Sheet VISIONx INC. www.visionxinc.com Powerful & Easy to Use Intuitive Interface VisionGauge OnLine is a powerful and easy-to-use machine vision software for automated in-process
More informationA STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION)
A STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER 6668584 U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION) UNILOCK U FLUSH OR ABOVE PEARL JEWELRY APPLICATION (10) UNILOCK (The Ultimate Jewelry
More informationMCFCW-20-4HS-1 (4-Pipe) High Static Chilled/Hot Water Ceiling Concealed Cased Fan Coil 208/230V 4-Pipe Heating & Cooling Fan Coil 60,000 BTUH
MCFCW-20-4HS-1 (4-Pipe) High Static Chilled/Hot Water Ceiling Concealed Cased Fan Coil 208/230V 4-Pipe Heating & Cooling Fan Coil 60,000 BTUH 1 Chilled and Hot Water Fan Coil High Static 4-Pipe Nominal
More informationFTIR-7600 FT-IR Spectrometer Accessories Price List 2011
FTIR-7600 FT-IR Spectrometer Accessories Price List 2011 Lambda Scientific Systems, Inc. Part # Description of Item Price (USD) 50 Magnetic Film/Pellet Holder (for 13 mm film/pellet samples) The Magnetic
More informationA STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION)
A STONE SET TECHNOLOGY PRODUCT US PATENT NUMBER 6668584 U N I L O C K (THE ULTIMATE JEWELRY ELEMENT OF PERSONALIZATION) UNILOCK U FLUSH INTO GOLD JEWELRY APPLICATION (1) UNILOCK (The Ultimate Jewelry Element
More informationMCFCW-08-4LS-1 (4-Pipe) Low Static Chilled/Hot Water Ceiling Concealed Cased Fan Coil 208/230V 4-Pipe Heating & Cooling Fan Coil 24,000 BTUH
MCFCW-08-4LS-1 (4-Pipe) Low Static Chilled/Hot Water Ceiling Concealed Cased Fan Coil 208/230V 4-Pipe Heating & Cooling Fan Coil 24,000 BTUH 1 Chilled and Hot Water Fan Coil Low Static 4-Pipe Nominal Size:
More informationG SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS
0 Proven Reliability G SERIES ISOLATED, PROPORTIONAL DC TO HV DC CONVERTERS 100V to 6kV at 1.5W PRODUCT SELECTION TABLE NOW UL RECOGNIZED % Of Full Output 100 90 80 70 60 50 40 30 20 10 PRODUCT DESCRIPTION
More informationPDI-TOMO Quick Start Guide
PDI-TOMO Quick Start Guide Rev. 5 March 27, 2017 PDI-TOMO Version 2017.3 CHA-W & PDI-TOMO LICENSING Starting with CHA-W version 2016.017 and the initial release of PDI-TOMO version 2016.1, PDI s new uniform
More information