CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX
|
|
- Alison Barnett
- 6 years ago
- Views:
Transcription
1 CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX CARBON STEEL BARS Hot Rolled Rounds...3 Squares...4 Strip...4, 5 Flats...5, 6, 7, 8 COLD FINISHED Rounds , 10 Rounds Squares... 10, 11 Flats...11,12, 13, 14, 15 ANGLES Bar...17 Structural...18, 19 CHANNELS Bar...21 Structural...21, 22 Miscellaneous...22, 23 Junior...23 BEAMS Standard I...25 Wide Flange & H...26, 27, 28, 29 Junior...29 SHEETS Hot Rolled...31, 32 Order Guide (Press Braking Shapes)...33 PLATES Carbon Steel Plate...35, 36, 37, 38, 39 Pickled and Oiled Plate...40 FLOOR PLATE Floor Plate...41, 42 Abrasion Resisting Plate...42 Order Guide (Flame Cutting Shapes)...43, 44 PIPE...45 TUBING Square...47 Rectangular...48, 49, 50 EXPANDED METAL Standard...51 Flattened...52 GRATING Standard...53 Bar...54, 55 Stairtread...56 Catwalk...56 Grip Strut...57 MISCELLANEOUS Re Rod...59 Moulded Cover Bar...59 Threaded Rod...59 Rail...60 Bar Tees...61 Galvanized Sheets...62 Miscellaneous Galvanized...63 Carbon Steel Compositions...64, 65 1
2 Detroit Amrhein Road Livonia, MI (734) Fax (734) Toll Free (800) Belleville Schooner Drive Belleville, MI (734) Fax (616) Toll Free (888) GRAND RAPIDS 2768 Dormax S. W. Wyoming, MI (616) Fax (616) Toll Free (888) Cleveland 8383 Boyle Parkway Twinsburg, OH (330) Fax (330) Toll Free (888) East Chicago 4407 Railroad Ave. E. Chicago, IN (219) Fax (219) Toll Free (877) PUNCH PRESS TEE-SPLITTING TUMBLING BLANCHARD GRINDING DRILLING 20 FOOT PRESS BREAK 2 *See page 66 for more processing services
3 Hot Rolled Rounds Ft. For 20 Length Ft. For 20 Length 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Call us on all your requirements. New items arriving daily. No order too large or too small. 3
4 Hot Rolled Squares Ft. For 20 Length Ft. For 20 Length 1/ / / / / / / / / / / / / / / / / / / / / / / Hot Rolled Strip Ft. For 16 Length Ft. For 16 Length 1/8 x 3/ /8 x x 1/ x 3-1/ x 5/ x 3-1/ x 3/ x x 7/ x 4-1/ x x x 1-1/ x 5-1/ x 1-1/ x x 1-3/ x x 1-1/ x x 1-3/ x x x x 2-1/ x x 2-1/ x 2-3/
5 Hot Rolled Strip (Cont d) Ft. For 16 Length Ft. For 16 Length 3/16 x 1/ /16 x x 5/ x 3-1/ x 3/ x 3-1/ x 7/ x x x 4-1/ x 1-1/ x x 1-1/ x 5-1/ x 1-3/ x x 1-1/ x x 1-3/ x x x x 2-1/ x x 2-1/ x Hot Rolled Flats Ft. For 20 Length Ft. For 20 Length 1/4 x 3/ /4 x x 1/ x 3-1/ x 5/ x 3-1/ x 3/ x 3-3/ x 7/ x x x 4-1/ x 1-1/ x 4-1/ x 1-1/ x x 1-3/ x 5-1/ x 1-1/ x x 1-5/ x x 1-3/ x 7-1/ x x x 2-1/ UM x 2-1/ UM x 2-3/ UM /2UM UM
6 Hot Rolled Flats (Cont d) Ft. For 20 Length Ft. For 20 Length 5/16 x 1/ /8 x x 5/ x 2-1/ x 3/ x 2-1/ x 7/ x 2-3/ x x x 1-1/ x 3-1/ x 1-1/ x 3-1/ x 1-3/ x x 1-1/ x 4-1/ x 1-3/ x x x 5-1/ x 2-1/ x x 2-1/ x x 2-3/ x x UM x 3-1/ UM x 3-1/ UM x UM x 4-1/ x x 5-1/ /2 x 5/ x x 3/ x x x x 1-1/ UM x 1-3/ UM x 1-1/ UM x 1-3/ x x 2-1/ x 2-1/ x 2-3/ x /8 x 1/ x 3-1/ x 5/ x 3-1/ x 3/ x 3-3/ x 7/ x x x 4-1/ x 1-1/ x x 1-1/ x 5-1/ x 1-3/ x x 1-1/ x x 1-5/ x x 1-3/ UM UM UM
7 Hot Rolled Flats (Cont d) Ft. For 20 Length Ft. For 20 Length 5/8 x 3/ /4 x x 7/ x 4-1/ x x x 1-1/ x 5-1/ x 1-3/ x x 1-1/ x x 1-5/ x x 1-3/ UM x UM x 2-1/ UM x 2-1/ x 2-3/ /8 x x x 1-1/ x 3-1/ x 1-3/ x 3-1/ x 1-1/ x x 1-3/ x 4-1/ x x x 2-1/ x 5-1/ x 2-1/ x x x x 3-1/ x x UM x 4-1/ UM x UM x 5-1/ x x x /4 x 7/ UM x UM x 1-1/ x 1-1/ x 1-1/ x 1-1/ x 1-1/ x 1-5/ x 1-3/ x 1-3/ x x x 2-1/ x 2-1/ x 2-1/ x 2-1/ x 2-3/ x 2-3/ x x x 3-1/ x 3-1/ x 3-1/ x 3-1/ x x 4-1/
8 Hot Rolled Flats (Cont d) Ft. For 20 Length Ft. For 20 Length 1 x /2 x x 5-1/ x 4-1/ x x x x 5-1/ x x UM x UM x UM UM /4 x x 2-1 / /8 x x 2-3/ x 2-1/ x x x 3-1/ x 3-1/ x x x 4-1/ x x x x 5-1/ x /4 x 1-1/ x 1-3/ x 2-1/ x x 2-1/ x 2-1/ x x 2-1/ x 3-1/ x 2-3/ x x x 4-1/ x 3-1/ x x 3-1/ x 5-1/ x x x 4-1/ x x x x 5-1/ x x /2 x x x 3-1/ x /2 x 1-3/ x 4-1/ x x x 2-1/ x x 2-1/ x 2-3/ x x x 4-1/ x 3-1/ x x
9 Cold Finished Rounds 1018 Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /
10 Cold Finished Rounds 1018 (Cont d) Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar 4-7/ / / / / / / / / / / / / / / / / / Cold Finished Rounds 1045 Ft. Lbs. For 20 Bar Ft. Lbs. For 20 Bar 3/ / / / / / / / / / / / / / / / / / / Cold Finished Squares Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar 1/ / / / / / / / / /
11 Cold Finished Squares (Cont d) Ft. Lbs. For 12 Bar 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Cold Finished Flats Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar 1/8 x 1/8 x / / / / / / / / / / / /16 x 1/ / / / / / / / / / / / / / / / / / / / / / / /
12 Cold Finished Flats (Cont d) Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar 3/16 x 1-7/ /4 x / / /16 x 2-3/ / / / / / / / / / / / / / / /4 x 1-1/ / / / / / / / / / / / / / / / / / / / / / / / /8 x 2-1/ / / / / / / / / / / / / / / / / / / / /
13 Cold Finished Flats (Cont d) Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar 3/8 x /2 x / / / /8 x / / / / / / / / / / / / / / / / / /2 x 3-3/ / / / / / / / / / / / / / /4 x / / / / / / / / / / / / / / / / / / / /
14 Cold Finished Flats (Cont d) Ft. Lbs. For 12 Bar 3/4 x x / / / /8 x / / / / / /8 x / / / / / / /4 x 1-3/ / / / / / / / / / / / / / / / / / / x / / / / / / /8 x 2-1/ / / / /2 x 3-1/ / / / / / / / / / Ft. Lbs. For 12 Bar 14
15 Cold Finished Flats (Cont d) Ft. Lbs. For 12 Bar Ft. Lbs. For 12 Bar 1-1/2 x x / / / / / /4 x / / /8 x 3-1/ / / /4 x 2-1/2 x / / / / / / / / / x 5-1/ / x / / / / OUR TRUCKS DELIVER ANYWHERE IN MICHIGAN OHIO, INDIANA & ILLINOIS 15
16 16 Angles available in up to 60 foot lengths.
17 Bar Angles in Inches Ft. in Lbs. For 20 Length in Inches Ft. in Lbs. For 20 Length 1/2 x 1/2 2 x 2 1/ / / /4 x 3/4 1/ / / / x 1 1/ /4 x 1-1/2 3/ / / /2 x 1-1/2 1-1/4 x 1-1/4 3/ / / / / / /2 x 2 1-1/2 x 1-1/4 3/ / / / /2 x 1-1/2 3/ / / /2 x 2-1/2 1/ / / /4 x 1-1/4 5/ / / / / /4 x 1-3/4 1/ / / x 1-1/4 2 x 1-1/2 3/ / / / /
18 Structural Angles in Inches Ft. in Lbs. For 20 Length in Inches Ft. in Lbs. For 20 Length 3 x 2 4 x 3-1/2 3/ / / / / / / / x 4 1/ x 2-1/2 5/ / / / / / / / / / x 3 3/ x 3 1/ / / / / / / / / /2 x 2-1/2 5 x 3-1/2 1/ / / / / / / / / /2 x 3 5/ / / / / x 5 1/ / / /2 x 3-1/2 1/ / / / / / / x 3-1/2 1/ / / x 3 1/ / / x 4 3/ / / / / / / / / x 3-1/2 3/ / / / /
19 Structural Angles (Cont d) in Inches Ft. in Lbs. For 20 Length in Inches Ft. in Lbs. For 20 Length 6 x 6 8 x 6 5/ / / / / / / / x 8 7/ / / x 4 3/ / x 4 7/ / / / / / / Total Quantity = Lower Prices CONTRACTORS STEEL COMPANY Combines the of ALL Stock Items to Give You the Best Price Angles Channels Beams Tees Plate U.M. Plate Floor Plate H.R. Sheets Galvanized Bars & Structurals Grip Strut C.R. Rounds, Squares Strip, Flats H.R. Rounds, Squares Strip, Flats ReRod Threaded Rod Moulded Cover Bar Pipe Tubing Expanded Metal Grating 19
20 Fast PickUp and Delivery Service Modern Flame Cutting Facilities now with plasma cutting provides prompt service on cut shapes 18 ga plate. 20
21 Bar Channels In Inches Estimated in Lbs. Ft. 20 Ft. Bar 1 x 1/2 x 1/ /4 x 1/2 x 1/ /2 x 1/2 x 1/ x 1/2 x 1/ x 5/8 x 1/ x 10 x 1/ x 10 x 3/ Structural Channels D Depth of Channel & Ft. For 20 WT Thickness Of Web in Inches FW Width Of Flange in Inches 3 x 3.50 Ibs Ibs Ibs Ibs x 4.50 Ibs Ibs Ibs lbs x 6.70 Ibs Ibs x 8.20 Ibs Ibs Ibs x 9.80 Ibs lbs Ibs x 8.50 Ibs Ibs Ibs Ibs x Ibs Ibs Ibs x Ibs Ibs Ibs Ibs
22 Structural Channels (Cont d) D Depth of Channel & Ft. For 20 WT Thickness Of Web in Inches FW Width Of Flange in Inches 12 x 20.7 Ibs Ibs lbs x 33.9 Ibs Ibs Ibs Miscellaneous Channels Ship & Car -- 3 x 7.1 Ibs x 13.8 lbs x 12.0 Ibs Ibs Ibs Ibs Ibs x 17.6 Ibs Ibs Ibs x 18.7 Ibs Ibs Ibs Ibs x 23.9 Ibs Ibs x 22.0 Ibs Ibs Ibs Ibs Ibs x 31.0 lbs Ibs Ibs Ibs Ibs D Depth of Channel & Ft. For 20 WT Thickness Of Web in Inches FW Width Of Flange in Inches
23 Miscellaneous Channels Ship & Car (Cont d) D Depth of Channel & Ft. For 20 WT Thickness Of Web in Inches FW Width Of Flange in Inches 13 x 31.8 lbs Ibs lbs Ibs x 42.7 lbs lbs Ibs Ibs Junior Channels D Depth of Channel & Ft. For 20 For 30 WT Thickness Of Web In Inches FW Width Of Flange in Inches 10 x 6.5 lbs lbs x 10.6 lbs lbs Contractors Steel Company Offers the Business Community One of the Most Diversified Steel Service Centers in the Midwest 23
24 24 Beams up to 36 x 60 long Mill shipments received daily by truck and rail
25 Standard I Beams D Depth of Channel & Ft. For 20 WT Thickness Of Web in Inches WT Width Of Flange in Inches 3 x 5.70 Ibs Ibs x 7.70 Ibs Ibs. (1045) Ibs x Ibs Ibs x Ibs Ibs x Ibs Ibs x Ibs Ibs x Ibs Ibs x Ibs Ibs Ibs Ibs x Ibs Ibs x Ibs Ibs x Ibs Ibs x 80.0 Ibs Ibs Ibs Ibs Most Beams Available in Lengths of: 20, 25, 30, 35, 40, 45, 50, 55, 60 25
26 Wide Flange & H Beams Section and per Ft. for 40 Beam D Depth of Section in Inches Flange in Inches FW Width FT WT Web Thickness in Inches Area Sq. Inches 4 x 13.0 Ibs x 16.0 Ibs Ibs x 9.0 Ibs Ibs Ibs Ibs Ibs Ibs x 10.0 Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs x 12.0 Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs
27 Wide Flange & H Beams (Cont d) Section and per Ft. for 40 Beam D Depth of Section in Flange in Inches FW Width FT WT Web Area Sq. Inches 12 x 14.0 Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs x 22.0 lbs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs x 26.0 Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs
28 Wide Flange & H Beams (Cont d) Section and per Ft. for 40 Beam D Depth of Section in Inches Flange in Inches FW Width FT WT Web Area Sq. Inches 18 x 35.0 Ibs Ibs Ibs Ibs Ibs Ibs lbs lbs lbs lbs lbs Ibs Ibs Ibs Ibs x 44.0 lbs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs lbs Ibs Ibs Ibs Ibs x 55.0 Ibs lbs lbs Ibs lbs Ibs lbs Ibs Ibs Ibs Ibs Ibs Ibs x 84.0 Ibs Ibs Ibs Ibs Ibs Ibs lbs
29 Wide Flange & H Beams (Cont d) Section and per Ft. for 40 Beam D Depth of Section in Inches Flange in Inches FW Width FT WT Web Area Sq. Inches 30 x 90.0 Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs Ibs x Ibs Ibs lbs lbs lbs lbs Ibs x Ibs Ibs Ibs lbs Ibs Ibs lbs lbs WE SPLIT TEES FROM l.b. & W.F. BEAMS TO MEET YOUR REQUIREMENTS. Junior Beams D Depth of Beam & Ft. For 40 FW Width of Flange In Inches Thickness Of Web In Inches 6 x 4.4 lbs x 6.5 lbs x 9.0 lbs x 11.8 lbs
30 PLATE BURNING UP TO 16" THICK! CAD DOWNLOAD ADDRESSES: Detroit: GRAND RAPIDS: CLEVELAND: E.CHIGAGO: 24 HOUR PROCESSING ALL BURN-OUTS ARE DE-SLAGGED 30
31 Hot Rolled Sheets Thickness & Sq. Ft. Est. Sheet Thickness & Sq. Ft. Est. Sheet 7 Ga. (.1793) Ga. (.1196) x x x x x x x x x x x x Ga. (.1046) x x x x x x x x x x x x x x x x x x x Ga. (.1345) x x x x x Ga. (.0747) x x x x x x x x x x x x x x x x x x x x x Ga. (.1196) x Ga. (.0598) x x x x x x x x x x x x x x x x x x
32 Hot Rolled Sheets (Cont d) Thickness & Sq. Ft. Est. Sheet Thickness & Sq. Ft. Est. Sheet 18 Ga. (.0478) Ga. (.0359) x x x x x x x x Pickled & Oiled Sheet Thickness & Sq. Ft. Est. Sheet Thickness & Sq. Ft. Est. Sheet 16 Ga. (.059) Ga. (.1196) x x Ga (.0747) x x x ga (.1345) x x ga (.1046) x x On the Premises Facilities for Press Brake Work Shearing Sawing Electric Eye Burning Plasma Cutting Splitting T s Drilling Punching Tumbling Threading WE WILL CUT ANYTHING TO SIZE 32
33 33
34 34 HYDRAULIC PRESS BRAKE can bend sheet and plate up to 1/2 thick and 20 long.
35 Carbon Steel Plate Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate 3/16 (.1875) /8 (.375) x x x x x x x x x x x x x x x x x x x x x x x x x x x x /4 (.250) x x x x x x x x x x x x /2 (.500) x x x x x x x x x x x x x x x x x x x x x x x x x x /16 (.3125) x x x x x x x x x x /8 (.625) x x x x x x x x x x
36 Carbon Steel Plate (Cont d) Thickness & Sq. Ft. Plate Sq. Ft. Plate 5/8 (.625) x x x x x x x x x x x x x x x x x x x x x x x x /4 (.750) x x x x x x / x x x x x x x x x x x x x x x x x x x x x x x x /8 (.875) / x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
37 Carbon Steel Plate (Cont d) Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate 1-3/ / x x x x x x x x x x x x x x x x x / x x x x x x / x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x / x x x x x x x x x x x x x x x x x x x x / x x x x / x x x x x x x x x x x x x
38 Carbon Steel Plate (Cont d) Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate 2-1/ x x x x x x x x / x x x x x x x x x x x x / x x x x x x x x x x x x / x x x x x x x x / x x x x x x x x x x x x x x x x / x x x x / x x x x x x x x x x x x x x x x x x x x
39 Carbon Steel Plate (Cont d) Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate x x x x x x x x x / / x x x x x x x x x / / x x x x x x x x / x x x x x x x x
40 Carbon Steel Plate (Cont d) Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate 6-1/ / x x x x x x x x x x / / x x x x x x x / x x / x x x x / Pickled & Oiled Plate Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate 3/ x x / x x / x
41 Floor Plate Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate 14Ga x x x x / x x x x x x x x / x x x x x x x x x x x x x x x / / x x x x x x x x x x x x x x x x x x x x x x x / x x / x x x x x x x x x x x x x x x x / x x x x x x x x / x x x x x x x x x x x x x
42 Floor Plate (Cont d) Thickness & Sq. Ft. Plate Thickness & Sq. Ft. Plate x x x x x x x x x Abrasion Resisting Plate 3/ / Thickness 48 x Thickness 96 x & Sq. Ft. Plate & Sq. Ft. Plate 48 x x x x x x / x x x / x x x / x x x x x x x / x x x x x x / / x x x x x / x Abrasion Resistant Plate Available in grades Brinell and Brinell 42
43 ORDER GUIDE FOR FLAME CUTTING SHAPES Our multiple torch Flame Cutting equipment can produce practically any shape from any thickness plate in any quantity - use the above sketches to order your requirements or fax us your drawing. 43
44 44
45 Pipe Welded Plain Ends Nom. (in.) Schedule Ft. Wall Thickness O.D. I.D. Length 1/ / / / / / / / / XS STD XS STD Std }21 ft. 24 ft. 42 ft. Now Up to 60 Long Pipe! 45
46 46 Square & Rectangular Tube in up to 60 lengths!
47 Square Tubing Lengths 20, 24, 30, 36, 40, 48 & 60 Ft. Can also have Rolled or Cut to your specifications. & Wall per Foot & Wall per Foot 1/2 x 1/2 x 16 Ga..38 5/ /4 x 3/4 16 Ga..61 3/ Ga..75 1/ / x 5 x 3/ x 1 x 16 Ga..83 1/ Ga / / / /4 x 1-1/4 x 16 Ga / Ga x 6 x 3/ / / /2 x 1-1/2 16 Ga / Ga / / / / / / x 7 x 3/ /4 x 1-3/4 14 Ga / / / x 2 x 16 Ga / Ga / / x 8 x 3/ Ga / Ga / / / / / /8 x 2-1/8 x 10 Ga / /2 x 2-1/2 x 16 Ga x 10 x 3/ Ga / / / Ga / Ga / / / / x 12 x 3/ x 3 x 14 Ga / / / / / / / / / / x 14 x 5/ /2 x 3-1/2 1/ / / / / x 16 x 3/ / / / x 4 x 14 Ga /
48 Rectangular Tubing Lengths 20, 24, 30, 36, 40, 48 & 60 Ft. Can also have Rolled or Cut to your specifications. & Wall per Foot & Wall per Foot 1 x 1/2 x 16 Ga x 1-1/4 x 16 Ga Ga Ga x 3/4 x 16 Ga..72 1/ Ga..89 3/ /4 x 1 x 16 Ga..94 1/ Ga x 1-1/2 x 16 Ga / Ga /2 x 3/4 x 16 Ga..94 1/ Ga / / / /2 x 1 x 16 Ga x 2 x 16 Ga Ga Ga / Ga /4 x 1-1/4 x 16 Ga / Ga / / / x 1 x 16 Ga /2 x 1-1/2 x 16 Ga Ga Ga / / x 1-1/4 x 16 Ga / Ga / / /2 x 2-1/2 x 14 Ga x 1-1/2 x 16 Ga / Ga / / / /2 x 1 x 14 Ga x 1-1/2 x 1/ / x 2 x 14 Ga /2 x 1-1/2 x 16 Ga / Ga / / / / x 3 x 14 Ga / / /2 x 2 x 3/ / x 1 x 16 Ga / Ga / / x 2 x 1/ / / / / /
49 Rectangular Tubing (Cont d) Lengths 20, 24, 30, 36, 40, 48 & 60 Ft. & Wall per Foot & Wall per Foot 5 x 3 x 1/ x 5 x 3/ / / / / / / / / / x 2 x 3/ x 4 x 3/ / / / / / / x 3 x 3/ x 2 x 1/ / / / / / / / / x 4 x 3/ x 3 x 1/ / / / / / / / / / / x 6 x 3/ x 4 x 1/ / / / / / / / / x 3 x 3/ / / x 5 x 3/ / / / / x 5 x 3/ / / x 3 x 3/ / / / / / / x 7 x 3/ x 4 x 3/ / / / / / / / / x 2 x 3/ / / /
50 Rectangular Tubing (Cont d) Lengths 20, 24, 30, 36, 40, 48 & 60 Ft. & Wall per Foot & Wall per Foot 10 x 3 x 3/ x 8 x 3/ / / / / x 4 x 3/ / / / / / / x 4 x 1/ / / x 5 x 3/ / x 6 x 3/ x 6 x 1/ / / / / / / / x 10 x 5/ / / x 8 x 3/ / / x 4 x 1/ / / / / / / x 2 x 3/ x 8 x 5/ / / / / x 3 x 1/ x 6 x 5/ x 4 x 3/ / / / / x 4 x 3/ / / / x 8 x 3/ x 6 x 3/ / / x 12 x 3/ / / / / /
51 Standard Expanded Metal Expanded Metal Diamond Patterns Carbon Steel Safe-T.Mesh Standard 1/4 # Style Lbs per 100 Sq. Ft Standard Sheet (ft.) Width SWD Length LWD Design s (inches) Width SWD Length LWD Opening (inches) Width Length SWO Length LWO Approx. Strand (Inches) Overall Thickness Inches Number of Designs Ft. SWD LWD (%) Open Area /2 # /2 # & /2 # & /2 # & /4 # &6 8,4& /4 # &6 8,4& /4 #10 (13 ga.) 120 4& /4 # 9 (10 ga.) 180 4&6 8,4& # /2 # /2 # &6 8& /2 #10 (13 ga.) 79 4&
52 Flattened Expanded Metal Carbon Steel Flattened Style Lbs per 100 Sq. Ft Standard Sheet (ft.) Width SWD Length LWD Design s (inches) Width SWD Length LWD Opening (inches) Width Length SWO Length LWO Approx. Strand (Inches) Overall Thickness Inches Number of Designs Ft. SWD LWD (%) Open Area 1/4 #18F /2 #20F 40 3& /2 #18F 66 3& /2 #16F 82 3&4 8,4& /2 #13F 140 3&4 8,4& L2:: 55 3/4 #16F 51 3&4 8,4& /4 #14F 63 3&4 8,4& /4 #13F 75 3&4 8,4& /4 # 9F (10 ga.) 171 3&4 8,10& #16F /2 #16F /2 #14F
53 Standard Grating Style Lbs per 100 Sq. Ft Standard Sheet (ft.) Width SWD Length LWD Design s (inches) Width SWD Length LWD Opening (inches) Width Length SWO Length LWO Approx. Strand (Inches) Overall Thickness Inches Number of Designs Ft. SWD LWD (%) Open Area 3.0 # & 6 8, 6& # &10, 6& # 400 4&6 8&10, 5& # 427 4&6 8& # &10,5& # 625 4&6 8,4&
54 Bar Grating 54
55 Bar Grating STANDARD MESH 19-W-4 19-W-2 CLOSE MESH 15-W-4 15-W-2 Top View Bearing Bars C to C 19/16 19/16 15/16 15/16 Cross Bars C to C Specify For: General Duty Applications Smaller Openings Heavier Loads Smaller Openings Heaviest Loads Smallest Openings WEIGHT IN LBS. PER SQ. FT. BEARING BARS CROSS BARS TYPE 19-W-4 TYPE 19-W-2 TYPE 15-W-4 TYPE 15-W-2 3/4 x 1/8 3/4 x 3/16 1 x 1/8 1 x 3/16 1-1/4 x 1/8 1-1/4 x 3/16 1-1/2 x 1/8 1-1/2 x 3/16 1-3/4 x 5/16 2 x 3/16 2-1/4 x 3/16 2-1/2 x 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/8 5/16 5/16 5/16 5/16 5/
56 Stairtread Grating U. S. Pat. No. 3,406,608 A one-piece fabricated stair-tread furnished with red oxide paint. Advantages: Economy. Ease of installation. Strength. Maintenance Free. Standard and STYLE #4 Niles Unitread #4 Niles Unitread #4 Niles Unitread SIZE 8-1/2 x /2 x /4 x 30 APPROXIMATE SHIPPING WT lbs lbs lbs. Catwalk Grating catwalk 10 sections of grating designed primarily for platforms and pedestrian walkways. Long way of diamond runs across width for added strength. Advantages: Economy, Strength, Ease of Fabrication and Field Handling. Standard and Style Lbs. Sq. Ft x 2 60 lbs. 63 lbs. 80 lbs. 85 lbs. 100 lbs. 10 x lbs. 79 lbs. 100 lbs. 107 lbs. 125 lbs. 10 x 3 90 lbs. 94 lbs. 120 lbs. 128 lbs. 150 lbs. s, Gauges, Dimensions and s listed above are subject to mill tolerances. 56
57 Grip Strut s Linear Foot Material Channel Width 4-3/ /2 11-3/4 18-3/4 24 Steel 1-1/ Gauge 2-1/ Steel 1-1/ Gauge 2-1/ Grip Strut - Safety Grating Galvanized Steel 57
58 58 Blanchard Plate Grinding
59 Re Rod Bar No. Bar in Inches Diameter in Inches per Ft. inlbs /4 rd. 3/8 rd. 1/2 rd. 5/8 rd. 3/4 rd. 7/8 rd. 1 rd. 1-1/8 rd. 1-1/4 rd Moulded Cover Bar Threaded Rod 59
60 Rail weight per yard NAME a.s.c.e. a.s.c.e. a.s.c.e. a.s.c.e. a.s.c.e. NUMBER A HEIGHT 2-3/4 3-1/8 3-1/2 4-1/4 5-3/16 B BASE 2-3/4 3-1/8 3-1/2 4-1/4 5-3/16 C HEAD 1-1/2 1-11/16 1-7/8 2-3/8 2-9/16 Call Contractors Steel Company for all your rail accessories and services: Hole Punching & Drilling Hook Bolts Splice Bars Rail Clips Crane Stops 60
61 Bar Tees in Lbs. A Flange in Inches B Stem in Inches C Thickness in Inches Ft. 20 ft. Bar 3/4 x 3/4 x 1/ x 1 x 1/ /2 x 1-1/2 x 1/ / x 2 x 1/ We Split Tees From I.B. & W.F. Beams to Meet your Requirements 61
62 Galvanized Sheets Thk Sq. Ft. Piece 10 Ga x x x x Ga x x x x Ga , 36 x x x x Ga x x x x Ga x x x x Ga x x x x Ga x x x x Ga x x x
63 Miscellaneous Galvanized per Foot Wt 20 Length 3/8 Round /2 Round /8 Round /4 Round Round /4 x 3/4 x 1/8 Angle x 1 x 1/8 Angle /2 x 1-1/2 x 1/8 Angle x 2 x 1/8 Angle /2 x 1-1/2 x 3/16 Angle /2 x 1-1/2 x1/4 Angle x 2 x 3/16 Angle x 2 x 1/4 Angle /2 x 2-1/2 x 1/4 Angle x 3 x 1/4 Angle /2 x 3 x 1/4 Angle x 3-1/2 x 1/4 Angle x 3-1/2 x 5/16 Angle x 3-1/2 x 5/16 angle Channel 4.1# Channel 5.4# Channel 6.7# Channel 8.2# ADDITIONAL SIZES OF BARS AND STRUCTURALS CAN BE QUICKLY GALVANIZED. CALL FOR PROMPT DELIVERY. RailCar Shipments in Fin mills Daily 63
64 Carbon Steel Compositions Standard Steels Nonresulphurized AISI NO.* C Mn P Max. S Max. SAE No max M M
65 Carbon Steel Compositions (Cont.d) *Prefix M denotes merchant quality grades with wider carbon and manganese ranges than standard steels; all others are basic open hearth or oxygen process steels. When Silicon is required, the following ranges and limits are commonly used for basic open-hearth steel grades: Standard Steel Designation...Silicon Ranges or Limits Up to 1015 Excl max to 1025 incl max., 0.10/0.20, or 0.15/0.30 Over /0.20, or 0.15/0.30 When lead or copper are required, they are added elements to a standard steel. Lead is generally added in amounts ranging from 0.15 to 0.35%. Such a steel is identified by inserting the letter L between the second and third numerals of the AISI number (example: 10L 18). A36 - Structural Steel Chemical Requirements SHAPES BARS AND BAR SHAPES Over 3/4 to Over 1-1/2 All To 3/4 in. 1-1/2 in. to 4 in. Over 4 in. Thicknesses Thick, incl. Thick, incl. Thick, incl. Thick Carbon, max. % Manganese, % Phosphorus, max. % Sulphur, max. % Copper, min. % when copper steel is specified PLATES Over 3/4 Over 1-1/2 to Over 2-1/2 To 3/4 in. to 1-1/2 in 2-1/2 in. to 4 in. Over 4 in. Thick, incl. Thick, incl. Thick, incl. Thick, incl. Thick Carbon, max. % Manganese, % Phosphorus, max. % Sulphur, max. % Silicon, % Copper, min. % when copper steel is specified TENSILE REQUIREMENTS* Tensile Strength, psi... 58,000 to 80,000 Yield Point, Min., psi... 36,000 Elongation in 8 in., Min., per cent Elongation in 2 in., Min., per cent Modified for material under 5/16 or over 3/4 thick. 2 Modified for material over 3-1/2 thick. 65
66 COIL LEVELING - FLAT SHEET AND PLATE BEAM CAMBERING PLATE ROLLING PLATE SHEARING PRESS BRAKING UP TO 20" LONG PLATE BURNING FLAME/PLASMA CUT HI-DEFINITION PLASMA CUT SAW CUTTING COMPUTERIZED, STRAIGHT/MITRE CUT AUTOMATIC FEED LASER BURNING PRECISION CUT UP TO 1" THICK PLATE ±.010 STRUCTURAL ROLL rolling BARS, ANGLES channels, BEAMS, TUBES 66 TEE SPLITTING ROTARY SHEAR
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationKully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
More informationIndex. E Expanded Metal Raised Flattened Grating... 93
Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...
More informationNorth US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
More informationHot Rolled Steel Products. Contents
Hot Rolled Steel Products Contents Angles 2 Bar Gratg 3 Beams & Tees 4 Cap Rail 6 Channels 6 Expanded Metal 8 Flats & Strip 9 Floor Plate 12 Grip Step 13 Ladder Rung 13 Pipe 13 Plate 14 Rebar 14 Rounds
More informationCall to Order! 1
Carbon Steel Stainless Steel ANGLES BEAMS CHANNELS Bar Angles...... Structural Angles.............., Junior Beams... Standard....... Wide Flange 7,,9, Standard...... MC Shapes- (Car, Ship and Junior)......,
More informationIndex. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...
Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...
More informationLivingston & Co., Inc Gallia St. Portsmouth, Ohio (740) (740) Open Monday - Friday 8:00-12:00 12:45-4:00
Livingston & Co., Inc. 2502 Gallia St. Portsmouth, Ohio 45662 (740) 353-0763 (740) 353-6008 Open Monday - Friday 8:00-12:00 12:45-4:00 www.livingstonrecycling.com New Steel Prices Angles Size/Inch Thickness
More information(618) FAX (618)
All STEEL PRODUCTS, Inc. Steel Pipe 1/8 through 120 O.D. Mechanical Squares & Rectangulars 1/2 thru 4 Square Equal Rectangulars Structural Squares & Rectangulars 1-1/2 thru 16 Square Equal Rectangulars
More informationCommon grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile. Size Weight (lbs.) Weight (lbs.)
Bar Size Angle Common grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile Size Weight (lbs.) Weight (lbs.) A B C per Foot per 20' 1/2 x 1/2 x 1/8 0.38 7.6 5/8 x 5/8 x 1/8 0.48 9.6 3/4 x 3/4 x 1/8
More informationPlate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.
Channels - Standard Structural* Grades Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue. A Depth B Flange Width C Web Thickness Estimated Weight - Lbs. Lbs/Foot
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)
More informationThroughout this section there are various icons to help you with your product selection. Diameter STEEL
Icons Throughout this section there are various icons to help you with your product selection. Ø Diaeter STEEL Index Aluiniu Tread Plate... 433 Angles... 25 Black Annealed Tying Wire... 30 Black PVC Coated
More informationMetfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:
Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m
More informationBLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
More informationSTRENX TUBE 100XF STRENX TUBE 100XF. General Product Description
STRENX TUBE 100XF STRENX TUBE 100XF General Product Description Advanced high-strength structural hollow sections Strenx Tube 100XF is an HF-welded cold-formed structural hollow section made of hot-rolled
More informationThe flawed specimens we produce are used for procedure qualifications, personnel qualifications, performance demonstrations and NDE training.
INTRODUCTION TO FLAWSPEC The flawed specimens we produce are used for procedure qualifications, personnel qualifications, performance demonstrations and NDE training. Flawspec s corporate strategy and
More informationmetric conversion factors
metric conversion factors ENGLISH TO METRI MULTIPLY Y TO OTIN Pounds (avoirdupois).45359 Kilograms Net Tons (2000 lbs).90718 Metric Tons Gross Tons (2240 lbs) 1.01605 Metric Tons 25.4001 Millimeters Feet.304801
More informationChannel,Half Slot,10ft
printed April 25, 2009 Channel,Half Slot,10ft Half Slot Channel, Length 10 Ft, Width 1 5/8 In, Depth 13/16 In, Cold Formed, Steel, 9/16 X 1 1/8 In Slot, Pregalvanized, 14 Gauge Grainger Item # 5YB80 Price
More informationMembers: Sponsor: Dalton Hamilton Preston-Eastin Levi Edens Kenneth Mui Brice Abbott
Members: Dalton Hamilton Levi Edens Brice Abbott Sponsor: Preston-Eastin Kenneth Mui Mission Statement Wolf Pack Engineering strives to provide our customer with innovative solutions. We take a cost effective
More information(801) B-Decking Gate Operators Structural Steel Tubing Pipe Services Plate Grating / Grip Strut
B-Decking Gate Operators Structural Steel Tubing Pipe BUY AMERICAN! WE DO! BUY AMERICAN! WE DO! Services Plate Grating / Grip Strut (801) 486-4463 243 West 3300 South Salt Lake City, Utah 84115 M-F: 8:00
More informationCom-Tray. Under Floor. Labor-saving assembly Field proven and tested Superior construction Shipped ready to assemble
Com-Tray Chalfant, a leading supplier of cable trays and systems for utilities, industrial plants, and commercial service, offers Com-Tray, a unique modular, cost-saving system for routing and protecting
More informationWELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
More informationLOOK INSIDE FOR BEN STEIN S ARTICLE WE VE FIGURED HIM OUT RECTANGLE TUBE
METALMART INC. P.O. BOX 0 LEHI, UT 803 ARE YOU PLANNING A FALL PROJECT? *STEEL PIPE & TUBE *METAL ROOFING *STEEL SHAPES *SHEET & PLATE MARTY HOT BUYS! HOT BUYS! CALL TODAY! 800-97-029 LOOK INSIDE FOR BEN
More informationstandard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability
Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0)
More informationStainless steel, the most efficient, long-lasting and attractive product in the metallurgical sector
Stainless steel, the most efficient, long-lasting and attractive product in the metallurgical sector and innovation, the skill to develop a whole world of suggestions and novelties which provide a new
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationALLIANT METALS INC. PRODUCT & SERVICE CATALOG B Route 111 Hampstead NH RECEIVING HOURS: 8 a.m. to 4 p.m.
ALLIANT METALS INC. PRODUCT & SERVICE CATALOG 1-800-543-1453 134B Route 111 Hampstead NH 03841 OFFICE HOURS: 8 a.m. to 5 p.m. SHOP HOURS: 7 a.m. to 6:30 p.m RECEIVING HOURS: 8 a.m. to 4 p.m. No minimum
More informationStairtreads and landings
Stairtreads and landings Stairtreads and landing Weland manufactures straight stairtreads and landings from grating, slit plank type flooring and plank type flooring. The majority of the stairtreads and
More informationEHG stainless products: 2,500 tonnes in 3,000 dimensions in stock.
EHG stainless products: 2,500 tonnes in 3,000 dimensions in stock. Excerpt from the EHG stainless stock program. Complete stock programme at the EHG Webshop: www.ehg-steel.com We supply steel and metal.
More informationGratings. From building facades to heavy vehicle traffic. Types and versions. We can help you choose
Grating Gratings From building facades to heavy vehicle traffic Gratings are typically used in industrial settings and environments with stringent safety requirements. However, they can also be used as
More informationWrought Iron Brochure
Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541
More informationTable Of Contents. Tyson Gentz General Manager Electrical Services of Arizona. Training & Consulting. Custom Fabrication. Temporary Power Stations 4
Thank you for your interest in Electrical Services of Arizona. ESA s mission is two-fold. Through our service offerings we help customers be more competitive. In our products areas, we offer competitive
More informationSheet Metal Overview. Chapter. Chapter Objectives
Chapter 1 Sheet Metal Overview This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements of design,
More informationHor o i r z i on o n St S ee e l e l Company Overview
Horizon Steel Company Overview History of Horizon Steel Founded in 1983 Started to serve Cold Rolled and Hot Rolled users in the Chicago area mainly in furniture and shelving business. Began with 4 employees,
More informationSURE, SHERCON CAN DO IT.
SURE, SHERCON CAN DO IT. STANDARD MASKING PARTS MASKING CAPS Ultrabake TM Caps Ultrabake TM Washer Caps Ultrabake TM Grounding Caps Vinyl Caps MASKING PLUGS Ultrabake TM Plugs Hollow Ultrabake TM Plugs
More informationCAUTIONARY STATEMENT ON FORWARD-LOOKING INFORMATION
DECEMBER 2016 CAUTIONARY STATEMENT ON FORWARD-LOOKING INFORMATION Certain statements contained in this document constitute forward-looking statements or information within the meaning of applicable securities
More informationStrongman Metal Tools Price list July 2018
Strongman Metal Tools CC CK 2004/095733/23 CALL ANDRIES FOR EXPERT ADVICE 083 327 9988 or 087 135 2229 Soli Deo Gloria info@strongman.co.za Strongman Metal Tools Price list July 2018 PLEASE NOTE PRICES
More information6061-T6 Am. Std. I Beams/Al. Assn. I Beam
6061-T6 Am. Std. I Beams/Al. Assn. I Beam A C A B C B Dimensions Piece Finish 3 X.170 X 2.33 X 25 49.08 M. F. 3 X 349 X 2.509 X 25 64.78 M. F. 4 X.190 X 2.66 X 25 66.13 M. F. 4 X.326 X 2.796 X 25 82.08
More informationSOLID PERFORMANCE, AT A GREAT PRICE
SOLID PERFORMANCE, AT A GREAT PRICE There is simply not enough time in the day to search the web, or call around looking for the best deal. You don t need to. Norton Metal is a comprehensive abrasive line
More informationvoestalpine Specialty Metals
High performance metals, in-house manufacturing services and technical solutions to meet global demands in Oil & Gas www.voestalpine.com/specialtymetals Agenda» voestalpine company structure» (vsm) introduction»
More informationChapman Fence Company, Inc. (OC) UNIT PRICE
BID TABULATION Page 1 of 6 SECTION A - GALVANIZED CHAIN LINK FENCE 1 3 tall complete fence installation 10 lf $9.00 $90.00 $9.25 $92.50 $11.15 $111.50 2 4 tall complete fence installation 260 lf $10.72
More informationSTAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets ( Typical D&RGW cast stake pocket) 40 over the end sills 2-11 6-4 9-9 13-2 16-7 20-0 20-0
More informationROLLING COUNTER SHUTTERS
500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings
More informationVOLUME II B CIVIL, STRUCTURAL & ARCHITECTURAL WORKS
SHEET 1 OF 5 VOLUME II B CIVIL, STRUCTURAL & ARCHITECTURAL WORKS SECTION - D GENERAL TECHNICAL SPECIFICATION ROOLING STEEL SHUTTERS/GRILS Bharat Heavy Electricals Limited Project Engineering Management
More informationPNEUMATIC CONVEYING COMPONENTS
PNEUMATIC CONVEYING COMPONENTS TUBING, PIPE, BENDS, COUPLINGS & FITTINGS A HIGH-PERFORMANCE COMPANY H-P Products is certified to ISO 9001:2008 welcome to h-p products! H-P Products specializes in supplying
More informationAluminium & Stainless Steel
Aluminium & Stainless Steel Standard Stock Range ThyssenKrupp Materials (UK) Stockholding and Distribution Managing the flow of goods between the producer and our customers is a fundamental part of our
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0317)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0317) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationMALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting List Prices (MI-0118)
MALLEABLE IRON FITTINGS 150lb & 300lb Malleable Iron Pipe Fitting s (MI-0118) Manufacturing Facility is ISO9001:2000 Fittings Pressure Tested & Straightness Tested Dimensions Conform to ASME B16.3 Material
More informationEco-Line Band Saws. Economical Sawing Solutions for Manufacturing, Steel Service Centers and Miscellaneous Applications
Eco-Line Band Saws Economical Sawing Solutions for Manufacturing, Steel Service Centers and Miscellaneous Applications Structural integrity is more than an engineering term it s the Peddinghaus way of
More informationTable of contents. What is new in Advance Steel 2014 WELCOME TO ADVANCE STEEL USER INTERFACE ENHANCEMENTS... 6 MODELING JOINTS...
Table of contents WELCOME TO ADVANCE STEEL 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: Collision check results... 7 User interface 3: Steel
More information5 x 3.5 x.305 / #/ft x 20' #/pc. 7 x 4.5 x.345 / #/ft MILL ORDER
Boat Trailer Aluminum I-Beam - FULL SIZE Size in Inches (E x M x S / A) - 6061-T6 Full Radius 4 x 3 x.285 /.170 2.774 #/ft 16-64-205 x 18' 6" 51.319 #/pc 16-64-207 x 20' 55.480 #/pc 16-64-210 x 21' 58.254
More information401 west fields blvd El dorado springs, Missouri
401 west fields blvd El dorado springs, Missouri 64744 1-800-634-8449 Galvanized Sheet Metal Pipe Duct Elbows Fittings Serving the HVAC Industry Since 1948 401 W. Fields Blvd., El Dorado Springs, MO 64744
More informationVAREC 5000/5010 SERIES FLAME ARRESTERS
VAREC 000/00 SERIES FLAME ARRESTERS Group D end-of-line flame arresters with a unique extensible bank frame designed to stop the propagation of flame from external sources FEATURES 00 SERIES - HORIZONTAL
More informationSuperstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance
More informationM100/M100 AUTOMATIC CORNER FORMING IN ONE PASS
M100/M100 AUTOMATIC CORNER FORMING IN ONE PASS THE TECHNICAL CONCEPT The M100 forms high quality closed corners from a pre-bent flat blank from various Materials such as Mild Steel, Stainless Steel, Aluminum,
More informationDME DIN Metric Components. New components expand in-stock line
DME DIN Metric Components New components expand in-stock line Bronze-Plated Wear Plates Metric T DME Bronze-Plated Wear Plates provide a long-lasting wear surface for Bronze-Plated molds requiring slides,
More informationCoil Fed Laser Blanking Systems
IRON S.R.L Asservimenti Automatici ed Automazioni +39 0438 492390 Fax +39 0438 492 363 email: ironinfo@iron.it website: http://www.iron.it page: 1/50 IRON S.R.L Asservimenti Automatici ed Automazioni +39
More informationConnect Electricians' tools, consumables and enclosures
Connect Electricians' tools, consumables and enclosures 220 Tooling and consumables including electricians' hand tools, electrical insulation tapes, cable pulling socks, morse hole saws & accessories
More informationCAUTIONARY STATEMENT ON FORWARD-LOOKING INFORMATION
DECEMBER 2017 CAUTIONARY STATEMENT ON FORWARD-LOOKING INFORMATION Certain statements contained in this document constitute forward-looking statements or information within the meaning of applicable securities
More informationFlexible connectors made out of copper- and aluminium foils
Fleible connectors made out of copper- and aluminium foils We offer a wide range of standardized laminated connectors as well as multifarious designs according to your drawings or wishes. All articles
More informationaluminium extrusions 2-8 stainlees steel bar and sections stainless steel seamless tube 24-25
contents aluminium extrusions 2-8 brass 9 - copper 4 - stainlees steel bar and sections 6-2 stainless steel seamless tube 24-2 stainless steel hygienic tube 26 stainless steel handrail tube 2 stainless
More informationQUICKSHIP STOCKING PROGRAM
ISE, Inc. QUICKSHIP STOCKING PROGRAM A Guaranteed Delivery Program BANDS CARTRIDGES STRIP THERMOCOUPLES DIN CONTROLLERS ORDERING INFORMATION Ordering Options 1. Call (440) 237-3200 to place an order. 2.
More informationTHD / THDH Face Mount Hangers
EP angers T / T Face Mount angers T Medium capacity hanger for LVL, LSL, and PSL beams. T eavy capacity hanger for LVL, LSL, and PSL beams. Materials: See EP Face Mount angers charts, pages 147-148. Op
More informationFirestop Composite Sheet CFS-COS. for Firestop Composite Sheet. Hilti. Outperform. Outlast.
Installation Guide for Firestop Composite Sheet Hilti. Outperform. Outlast. Contents Board Seaming.......... 3 Overlap Seam onto Composite Sheet.......... 3 Butt Seam.......... 4 Flange Seam..........
More informationEXPANDED METAL MESH. Compendium for purchaser
Compendium for purchaser GALLERY OF REALIZATIONS 2 GALLERY OF REALIZATIONS 3 GALLERY OF MESHES IN 1:1 SCALE t1 t1 6 x 10 x 2.5 x 1 6 x 12 x 2.5 x 1 4 t1 t1 7 x 11 x 2.5 x 1 10 x 20 x 5 x 1 5 GALLERY OF
More informationper metre (Kg) 20mm 0.85
Dia Dia ROUND BAR machining 4 0.09 6 0. 8 0.9 6 0.26 2 0.4 9 6 0.4 8 0.4 6mm 0.4 6 0.6 4 0. 20mm 0.8 6 0.9 8.0. 8.4 4 2. 6 2.48 8 2.60 mm 2.6 2.09 40mm.2 8.6 4 4.2 8 4.8 2.49 2 8 6.20 2 4 6.9 2 8. 2 2
More informationExplosionproof Meter Housings
METER HOUSINGS Explosionproof Drilled and tapped to specification, attach layout sheet. Dimensions are internal. XJDGCH N4 XJDFGCH N4 4 1/8 x 4 1/8 X 3 XJMCGCH N4 6 3/4 x 6 3/4 x 3 XJTGCH N4 XJTFGCH N4
More informationfloor plate 14 GAUGE (.078 THICK)
ISSUE: OCT 2010 85 South 1350 East Lehi, Utah 84043 EXPIRES ON OR BEFORE NOV. 15, 2010 OR BEFORE need a tax credit! METAL ROOFING FOR YOUR HOME ENERGY STAR COLORS! SAVE UP TO $1500.00 ON A RE-ROOF! (CREDIT
More informationbar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
More informationBELLOWS COVERS AND.
BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationCURRICULUM FOR SIX MONTH CERTIFICATE COURSE FITTING & PLUMBING UNDER DEVELOPMENT. Prepared By CURRICULUM DEVELOPMENT CELL
CURRICULUM FOR SIX MONTH CERTIFICATE COURSE IN FITTING & PLUMBING UNDER DEVELOPMENT Prepared By CURRICULUM DEVELOPMENT CELL INSTITUTE OF RESEARCH, DEVELOPMENT, TRAINING,U.P., KANPUR-208002 SIX MONTH CERTIFICATE
More informationConnectivity Products
Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes
More informationStainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
More informationLocated at Located in the Traffic Signing Category.
Located at https://mdotjboss.state.mi.us/tssd/tssdhome.htm# Located in the Traffic Signing Category. August 29 th, 2018: The following updates were made to the web site. SIGN-100-G: Dated 05/24/18 - The
More informationThe Collection. - Weather Proof - Insect Proof - Load Bearing - Low Maintenance
The Collection - Weather Proof - Insect Proof - Load Bearing - Low Maintenance - Ready to Prime and Paint - Limited Lifetime Warranty* - Custom Fluting Available - Factory PermaPriming Available H 24"
More informationCAUTIONARY STATEMENT ON FORWARD-LOOKING INFORMATION
SEPTEMBER 2018 CAUTIONARY STATEMENT ON FORWARD-LOOKING INFORMATION Certain statements contained in this document constitute forward-looking statements or information within the meaning of applicable securities
More informationProducts Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
More informationALL INDIA PTFE STANDARD PRICE LIST
Ref. AIP/005/RO1 2 nd April 2017 This is to inform you that prices of PTFE (Poly Tetra Fluoro Ethylene) Stock-shapes & Machined Components w.e.f. 2 nd April 2017 are as below subject to terms and conditions
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More informationCATALOGUE OF MATERIALS, TOOLS & ACCESSORIES METRIC (SI)
Insulation Second Issue April 2015 See rear cover for applicable countries The Kingspan System CATALOGUE OF MATERIALS, TOOLS & ACCESSORIES METRIC (SI) Low Energy Low Carbon Buildings Introduction What
More informationTimken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
More informationPRECISION STOCK. Dowel Pins Extractable Dowel Pins Feeler Gauge Stock Gauge Plate Key Steel Shim Brass (Sheet) Shim Steel (Sheet) Silver Steel
PRECISION STOCK Dowel Pins Extractable Dowel Pins Feeler Gauge Stock Gauge Plate Key Steel Shim Brass (Sheet) Shim Steel (Sheet) Silver Steel PS1 PS2 PS3 PS3 PS4 PS5 PS5 PS5 - PS6 PS1 DOWEL PINS HARDENED
More informationSLEEVE AND COLLAR MOUNT FREESTALLS
SLEEVE AND COLLAR MOUNT FREESTALLS FREESTALLS-1 FEATURES Hot dipped galvanized or pre-galvanized loop option. Heavy galvanized 3 1/2 post Easy installation Adjustable height Cow friendly loop profile to
More informationDimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.
Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43
More informationHardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
More informationExercise Notebook Machinery
Exercise Notebook Machinery Exercise Notebook Machinery ACME Book Binding Machine Unique Features Supported: Single Clamp Perfect Binder with Automatic Jogging and Clamping of the Signatures / Formes.
More informationSecurity Seals, Scaffolding and Transit Protection
Security Seals, Scaffolding and Transit Protection Security Seals 68-70 Transit Protection 71-73 Scaffolding Safety 74-75 67 Quote / sample / order online Smooth Grips SR 1153 Smooth strap allows easy
More informationHIGH PRECISION METAL FABRICATION FACILITY
VERTIGO GROUP INC. - FABRICATION DIVISION 2004 8 AXIS AMADA FBD1253NT, 125 ton, CNC hydraulic press brake 2000 AMADA RG80, 80 ton, CNC hydraulic press brake CNC BACK GAUGE 2004 AMADA EM2510NTCE, 22 ton,
More informationMarch Roof Product Guide. Warehouses located in Atlanta, GA and Temecula, CA
March 2018 Roof Product Guide Warehouses located in Atlanta, GA and Temecula, CA 1 Table of Contents Product Portfolio...3 RBI Versatile Roof Mount Solution RS-VS...5 Rails & Splice Connectors (East)...6
More informationANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS
EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed
More informationAiretool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationCOMPUTER AIDED DESIGN AND MANUFACTURING OF PIPELINE ENERGETICS SYSTEMS COMPONENTS
COMPUTER AIDED DESIGN AND MANUFACTURING OF PIPELINE ENERGETICS SYSTEMS COMPONENTS Assoc. Prof. Ing. Slavko Pavlenko, PhD. Faculty of Manufacturing Technologies University of Technology in Kosice with a
More informationArgenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
More informationSheet Metal Forming Simulation for Light Weight Vehicle Development
Sheet Metal Forming Simulation for Light Weight Vehicle Development Die Design & Simulation Software Experience Arthur Tang May 29, 2013 Grand Rapids, MI Industry Demand for Fuel Efficient Vehicles The
More informationSECTION EGR ELEVATED GLASS RAILING SYSTEMS. A. Tempered Glass Wet Glazed in Elevated Railing Assemblies.
1 SECTION 05 7310 EGR ELEVATED GLASS RAILING SYSTEMS PART 1 - GENERAL 1.1 SECTION INCLUDES A. Tempered Glass Wet Glazed in Elevated Railing Assemblies. 1.2 RELATED SECTIONS A. Section 05 5000 - Metal Fabrications
More informationEcoTec SP tables and base cabinets
Shapes and colours Tabletops and furniture surfaces Table superstructures, base cabinets and handles 30 mm panel with replaceable edge, Antistatic, light grey 30 mm panel with impact-resistant edge band
More informationSOCKET FITTINGS. Nom. BLACK PP 6111 NATURAL PP Nom. BLACK PP 6117 NATURAL PP Nom. BLACK PP 6133 NATURAL PP 6233 CHEMTROL CUSTOMER SERVICE
POLYPROPYLENE SCHEDULE 80 PIPE, VALVES & FITTINGS BLACK AND CHEM-PURE NATURAL CH-PP-1018 Effective Oct. 01, 2018 Supercedes CH-PP-0118 dated Jan. 01, 2018 Suggested list prices subject to change without
More information