DMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial

Transcription

1 DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure from bar up to bar Output signals -wire: ma -wire: 0 0 ma / 0 0 V others on request Special characteristics excellent long-term stability, also with high dynamic pressure loads insensitive to pressure peaks high overpressure capability Optional versions IS-version Ex ia = intrinsically safe for gases and dusts SIL version according to IEC 6508 / IEC 65 specific versions The pressure transmitter type DMP has been especially designed for use in hydraulic applications with high static and dynamic pressure. The transmitter is characterized by an excellent long term stability, also under fast changing pressure as well as positive and negative pressure peaks. The modulare concept of the device allows to combine different stainless steel sensors and electronic modules with a variety of electrical and mechanical versions. Thus a diversity of variations is created, meeting almost all requirements in hydraulic applications. Preferred areas of use are Plant and Machine Engineering - machine tools - hydraulic presses - injection moulding machine - handling equipment - elevated platforms - test benches Mobile Hydraulics BD SENSORS GmbH BD-Sensors-Straße Tel: +49 (0) 9 5 / D Thierstein Fax: +49 (0) 9 5 / 98 - info@bdsensors.de

2 DMP Input pressure range Nominal pressure gauge / abs. [bar] Overpressure [bar] Burst pressure [bar] Output signal / Supply Standard -wire: ma / V S = 8... V DC Option IS-protection -wire: ma / V S = V DC Options -wire -wire: ma / V S = V DC V / V S = V DC Performance Accuracy standard: ± 0.5 % FSO option : ± 0.5 % FSO option : ± 0. % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time -wire: 0 msec -wire: msec accuracy according to IEC limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Tolerance band ± 0.75 % FSO in compensated range C Permissible temperatures Permissible temperatures medium: C electronics / environment: C storage: C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 0 g RMS ( Hz) according to DIN EN Shock 00 g / msec according to DIN EN Materials Pressure port stainless steel.4404 (6 L) Housing stainless steel.4404 (6 L) Option compact field housing stainless steel.405 (0), cable gland brass, nickel plated others on request Seals (media wetted) standard: FKM options: EPDM (for P N 60 bar) NBR others on request Diaphragm stainless steel.445 (6 L) Media wetted parts pressure port, seals, diaphragm Explosion protection (only for ma / -wire) Approval DX9-DMP IBExU 0 ATEX 068 X zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex iad 0 T85 C Safety technical maximum values U i = 8 V DC, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 μh Permissible temperatures for environment in zone 0: C with p atm 0.8 bar up to. bar in zone or higher: C Connecting cables (by factory) cable capacitance: signal line/shield also signal line/signal line: 60 pf/m cable inductance: signal line/shield also signal line/signal line: μh/m pressure measurement

3 DMP Miscellaneous Option SIL according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma signal output voltage: max. 7 ma Weight approx. 40 g Installation position any Operational life > 00 x 0 6 pressure cycles CE-conformity EMC Directive: 004/08/EC Pressure Equipment Directive: 97//EC (module A) 4 Pressure transmitters are calibrated in a vertical position with the pressure connection down. 4 This directive is only valid for devices with maximum permissible overpressure > 00 bar Wiring diagrams -wire-system (current) p supply + -wire-system (current / voltage) supply + p VS VS supply I supply I/U signal + A/V Pin configuration Electrical connection ISO 4400 Supply + Supply Signal + (for -Leiter) Electrical connections (dimensions in mm) Binder 7 (5-pin) 4 Mx / Metall (4-pin) Shield ground pin 5 4 field housing IN + IN OUT + cable colours (DIN 4700) wh (white) bn (brown) gn (green) gn/ye (green / yellow) standard option ISO 4400 Binder Series 7 5-pin Mx 4-pin cable outlet with PVC cable (IP 65) (IP 67) (IP 67) (IP 67) 5 compact field housing (IP 67) universal field housing stainless steel.4404 (6 L) with cable gland M0x.5 (ordering code 880) and other versions on request 5 standard: m PVC cable without ventilation tube (permissible temperature: C) 6 different cable types and lengths available, permissible temperature depends on kind of cable cable outlet, cable with ventilation tube (IP 68) 6

4 DMP Mechanical connections (dimensions in mm) standard for accuracy 0.5 / 0.5 % standard for accuracy 0. % ; SIL- and SIL-IS-version G/" DIN 85 G/" DIN 85 with ISO 4400 with ISO 4400 option G/" EN 87 G/4" DIN 85 G/4" EN 87 /" NPT metric threads and other versions on request This data sheet contains product specification, properties are not guaranteed. Subject to change without notice. pressure measurement Telefon +49 (0) 9 5 / 98-0 Telefax +49 (0) 9 5 / info@bdsensors.de DMP_E_007

5 Fax: +49 (0) 9 5 / 98 - Ordering code DMP DMP Pressure Input Output gauge absolute 0 [bar] ma / -wire 0 0 ma / -wire 0 0 V / -wire E S Intrinsic safety 4 0 ma / -wire SIL 4 0 ma / -wire SIL with Intrinsic safety 4 0 ma / -wire ES Accuracy standard 0.5 % option 0.5 % option 0.0 % Electrical connection Male and female plug ISO 4400 Male plug Binder series 7 (5-pin) Cable outlet with PVC cable Cable outlet Male plug Mx (4-pin) / metal T A 0 T R 0 M 0 Compact field housing stainless steel.405 Mechanical connection G/" DIN 85 G/" EN 87 G/4" DIN 85 G/4" EN 87 /" NPT Seals FKM EPDM NBR Special version standard N measurement starts with ambient pressure standard: m PVC cable without ventilation tube (permissible temperature: C), optionally without ventilation tube cable with ventilation tube (code TR0 = PVC cable), different cable types and lengths available, permissible temperature depends on kind of cable, price without cable 4 possible for nominal pressure ranges P N 60 bar 5 BD SENSORS GmbH BD-Sensors-Straße Telefon +49 (0) 9 5 / D Thierstein Telefax +49 (0) 9 5 / 98 - info@bdsensors.de list contains product specification; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice. This price li