KEL-DPZ 24 Cable entry plates

Transcription

1 KEL-DPZ 24 IP65 KEL-DPZ on request also available with threaded bushings.* Membrane on front Description Type Order No. Number of PU cables KEL-DPZ entry plates are designed to route and seal standard cables (from 3.2 mm to 22 mm in diameter) in limited space. KEL-DPZ mm mm Simply push standard cables through the thin membrane and it s immediately sealed (IP65 / IP66) and strain relieved. The size DPZ 24 matches exactly the cut-out dimensions of 24-pole standard industrial connectors. KEL-DPZ mm The assembly of the KEL-DPZ with cables or pneumatic hoses can be done within seconds. Simply put a small slit in the thin membrane and push the cable through. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. KEL-DPZ mm mm mm mm KEL-DPZ mm mm mm *Except KEL-DPZ-KL / KEL-DPZ round 50

2 KEL-DPZ 24 Conical shape on back provides additional sealing and strain relief Type Order No. Number of PU Description IP65 cables KEL-DPZ mm mm mm Assembly within seconds Dual sealing of cables according to IP65 Automatic seal and strain relief for the cable KEL-DPZ mm mm 21x mm Cut-out dimensions Frame: Polyamide (PA) Sealing plate: Elastomer IP mm / page KEL-DPZ x mm Plugs FP Flanged plates Page 33 Page KEL-DPZ x mm mm 51

3 KEL-DPZ-B KEL-DPZ on request also available with threaded bushings.* IP66 Description Type Order No. Number of PU cables 72,80 58 The KEL-DPZ-B entry plates are designed for routing standard cables (without connectors). With an area of only mm, up to 25 cables can be easily routed and sealed according to IP ,70 KEL-DPZ-B mm mm mm Simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed and strain relieved. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed ,80 58 KEL-DPZ-B mm mm mm mm 5,70 Space saving shape Dual sealing of cables according to IP66 Assembly within seconds ,80 58 KEL-DPZ-B x mm Specifi cation 5,70 Cut-out dimensions Frame: Polyamide (PA) Sealing plate: Elastomer IP mm FP Flanged plates Page *Except KEL-DPZ-KL / KEL-DPZ round 52

4 KEL-DPZ-E Membrane on front Conical shape on back provides additional sealing and strain relief IP66 Description Type Order No. Number of PU cables KEL-DPZ-E mm KEL-DPZ-E is designed for routing standard cables (without connectors). 5,70 With an area of only mm, up to 21 cables can be easily routed and sealed according to IP KEL-DPZ-E x mm Simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed and strain relieved. 5,70 ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. Space saving shape Dual sealing of cables according to IP66 Assembly within seconds Specifi cation Cut-out dimensions Frame: Polyamide (PA) Sealing plate: Elastomer IP mm / page

5 KEL-DPZ-KL IP65 Membrane on front Conical shape on back provides additional sealing and strain relief Description Type Order No. Number of PU cables The cable entry plate KEL-DPZ-KL is designed for routing up to 72 standard cables (without connectors). The KEL-DPZ products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed and strain relieved. ST Plugs can be used for sealing pierced membranes if cables are removed. The KEL-DPZ-KL matches on terminal boxes KL from Rittal. Space saving shape Dual sealing of cables according to IP65 Assembly within seconds 9, , KEL-DPZ-KL x mm 21x mm mm mm 5 4,5 Cut-out dimensions Support: Steel, molded with elastomer Sealing plate: Elastomer IP mm Inserts Page 33 54

6 KEL-DPZ round IP68 Membrane on front Conical shape on back provides additional sealing and strain relief Type Order Number of Thread External Exceeds PU No. cables metric diameter DA cut-out KEL-DPZ entry plates are designed to route and seal standard cables (from 3.2 mm to 22 mm in diameter) in limited space. KEL-DPZ mm mm M 32 mm 8.0 mm Simply push standard cables through the thin membrane and it s immediately sealed (IP65 / IP68) and strain relieved. KEL-DPZ mm M 32 mm 8.0 mm The round versions of the KEL-DPZ series have a thread to fit in metric cut-outs from M32 to M63. Thus cut-outs for standard metric cable glands can be used. The assembly of the KEL-DPZ with cables or pneumatic hoses can be done within seconds. Simply put a small slit in the thin membrane and push the cable through. KEL-DPZ mm mm M mm 8.0 mm ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. KEL-DPZ mm mm M mm 8.0 mm KEL-DPZ mm mm mm M mm 8.0 mm KEL-DPZ mm mm M mm 8.0 mm KEL-DPZ mm M mm 8.0 mm 56

7 KEL-DPZ round Type Order Number of Thread External Exceeds PU No. cables metric diameter DA cut-out IP68 KEL-DPZ KEL-DPZ x mm mm mm mm mm mm M mm 8.0 mm M mm 8.0 mm Assembly within seconds Dual sealing of cables according IP68 Automatic seal and strain relief for the cable Suitable for standard or metric cut-outs Polyamide locknuts are included in the shipment KEL-DPZ KEL-DPZ mm mm mm M mm 8.0 mm 35x mm M mm 8.0 mm Thread length Cut-out dim. Thread frame: Polyamide (PA) Sealing plate: Elastomer IP68 (certified according to DIN EN 60529: ) 14 mm Metric standard sizes FP Flanged plates MP Module plates Page Page

8 KEL-DP 24 Fastening Description Type Order No. Order No. Number of PU Type A Type B cables KEL-DP entry plates are designed for routing standard cables (without connectors). The KEL-DP products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. A special fixing rib ensures a centered fit in the cut-outs. KEL-DP KEL-DP max mm 5 max..5 mm 12 max mm Quick and easy assembly, no tools required Cost-effective For wall-thickness up to mm KEL-DP max. 6.5 mm 7 max mm Cut-out dimensions Elastomer IP mm KEL-DP KEL-DP max. 6.5 mm 4 max mm 4 max mm 2 ASI-Leitungen 48x max. 6.5 mm Type A: Type B: For wall thickness mm For wall thickness mm FP Flanged plates Page KEL-DP x max. 5.3 mm 9 max. 6.4 mm 8 max. 8.3 mm 58

9 KEL-DP-E Type Order No. Cut-out Number of PU Description [mm] cables 62 KEL-DP-E max. 8.3 mm 2 max. 6.5 mm 25 KEL-DP-E entry plates are designed for routing standard cables (without connectors). KEL-DP-E max. 6.5 mm max mm The KEL-DP-E products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed. 2 ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. A special fi xing rib ensures a centered fi t in the cut-outs. KEL-DP-E max. 8.3 mm 2 max. 6.5 mm 25 KEL-DP-E max. 6.5 mm max mm 2 25 Quick and easy assembly, no tools required Cost-eff ective For wall-thickness up to mm KEL-DP-E KEL-DP-E max. 6.5 mm 1 max. 8.3 mm max mm 16 max. 6.5 mm 4 max. 8.3 mm max mm Elastomer IP64 78 KEL-DP-S Edge radii R2 8 max. 7.5 mm 19,50 59

10 KEL-DP round Fastening IP65 Type Order No. Order No. Number of Cut-out External PU Type A Type B cables diameter DA KEL-DP max. 8.0 mm ø mm KEL-DP entry plates are designed for routing standard cables (without connectors). The KEL-DP products are a cost saving alternative to traditional cable glands. Either push the cable through the thin membrane or simply put a small slit in the thin membrane and push the cable through. Once the cable is through the membrane, it is immediately sealed. ST Plugs (page 33) can be used for sealing pierced membranes if cables are removed. A special fixing rib ensures a centered fit in the cut-outs. KEL-DP 25 6 KEL-DP 32 KEL-DP max. 5.2 mm 2 max. 9.4 mm 6 max. 5.2 mm 2 max. 6.4 mm 2 max. 9.4 mm 5 max. 7.0 mm 4 max. 18 mm ø mm ø mm ø mm Quick and easy assembly, no tools required Cost-effective For wall thickness up to mm KEL-DP KEL-DP max. 7.2 mm 3 max mm max mm max. 9.2 mm 2 max mm ø mm ø mm Cut-out dimensions Type A: Type B: Elastomer IP65 Metric standard sizes For wall thickness mm For wall thickness mm KEL-DP KEL-DP KEL-DP max. 5.3 mm 5 max. 6.3 mm 3 max. 9.5 mm 4 max mm 5 max. 5.3 mm 5 max. 6.3 mm 4 max. 7.2 mm 2 max. 6.0 mm 2 max. 4.0 mm 16 max. 6.3 mm 4 max. 9.3 mm ø mm ø mm ø mm KEL-AD Cap for attachment housing FP Flanged plates Page 46 Page KEL-DP x max. 5.2 mm ø mm 60

11 KEL-QTA Cable entry frames Description Type Order No. Order No. Cut-out Cables PU Type A Type B [mm] The KEL-QTA easily routes pre-terminated and standard cables without using tools. pre-terminated mm KEL- QTA DP conventional 16 max. 7 mm max. 12 mm max. 16 mm Quick assemly without tools by using multi inserts Simple assembly and diasassembly in case of change or service Routing of pre-terminated and standard cables in a high packing density Suitable for standard cut-outs Elastomer IP54, with correct selection of the cable inserts QT KEL- QTA pre-terminated mm Type A: Type B: For wall thickness mm For wall thickness mm QT Cable inserts FP Flanged plates Page 47 Page KEL- QTA B pre-terminated mm

12 KEL-QTA KEL-QTE Cable entry frames Type Order No. Order No Cut-out Cables PU Description Type A Type B [mm] pre-terminated non-pre-term KEL-QTA ø mm - 37,5 The KEL-QTA easily routes pre-terminated and standard cables without using tools. KEL-QTA ø mm Quick assemly without tools by using multi inserts Simple assembly and diasassembly in case of change or service Routing of pre-terminated and standard cables in a high packing density KEL-QTE ø mm max. 5.2 mm 6,4 2,3 24 6,4 2,3 (QTA) Cut-out dimension Elastomer IP54, with correct selection of the cable inserts (QT single) Metric standard sizes KEL-QTE ø mm max. 5.2 mm 24 Type A: Type B: For wall thickness mm For wall thickness mm KEL-QTE ø mm max. 5.2 mm 6,4 2,3 QT Cable inserts KEL-AD Cap for attachment housing Page 47 Page ,4 2,3 KEL-QTE ø mm max. 5.2 mm 24 45

13 QT Inserts Insert QT in combination with QVT-CLICK Type Order No. Clamping range PU Description grey QTB Blind insert QT mm QT QT mm QT mm QT mm QT mm QT mm QT mm QT mm QT mm QT mm QT mm QT mm QT ø 3 mm QT ø 4 mm QT ø 5 mm QT ø 5.5 mm QT-ASI QT ø 6 mm The QT range supports cable diameters from 3 to 15 mm. They are used with the following cable entry frames: KEL-QUICK Page QVT / QVT-CLICK Page KEL-QTA Page - 45 Assembly When installing the insert, the smooth side of the insert has to face the middle of the cable entry frame. Elastomer - 40 C to+ 90 C (static) QT ø 6.5 mm QT ø 7 mm QT ø 3 mm QT ø 4 mm QT ø 4.5 mm QT ø 5 mm QT ø 5.5 mm QT ø 6 mm QT tele KEL-QUICK Cable entries QVT Cable glands KEL-QTA Cable entries Page Page Page - 45 QT-ASI ASI-cable QT-ASI ASI-cable QT tele Telephone cable 47

14 ST Plugs Type Order No. Diameter Length PU Description D L ST mm 25 mm 25 D ST mm 25 mm 25 ST mm 25 mm 25 ST mm 25 mm 25 ST mm 25 mm 25 ST mm 25 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 ST mm 20 mm 25 L Plugs are used to close either KT inserts or KEL-DPZ cable entry plates not equipped with cables. Perfect for appplications where cables have been removed. Sealing unused cable entries KT + DT Cable inserts DPZ DP Polyamide (PA), white IP54-40 C to C Page Page Page ST mm 20 mm 25 ST mm 20 mm 25 ST ASI mm 25 33