15 and 16 Series BSP and hose fittings
|
|
|
- Victoria Wilkerson
- 6 years ago
- Views:
Transcription
1 SP and hose fittings > > Port size: M5, 1/ > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical features Medium: ompressed air and fluid compatible with sealing materials Thread forms: Tapered in conformity with ISO 7.1, S 21, DIN Parallel in conformity with ISO 228 lass A. Metric in conformity with ISO R/262. Operating pressure: enerally limited by tubing specification except where polyamide sealing washers are used (banjo bolts and M5 units). In these cases pressure is limited to 18 bar (261 psi). low regulating banjos are limited to bar ( psi) operating range. Suitable for vacuum applications. Ambient/Media temperature: enerally limited by tubing specification except where polyamide sealing washers are used (banjo bolts, & M5 units). In these cases temperature is limited to +70 (+158 ). Materials: ody of the fittings are made from rass type; OT UNI N 12164/5 W 614/7N and undergo to a nickel-plating process. Other materials will be specified with the fitting details. All ISO male threads supplied with opper sealing washer unless stared otherwise. en
2 SP and hose fittings Straight adaptors, connectors and plugs ISO - Reducing connector ISO - xpanding connector ISO - ISO R xpanding connector ISO - ISO R Reducing connector NPT - ISO R Adaptor ISO - NPT Adaptor Metric and ISO - ulkhead connector Page 4 ISO - Sleeve adaptor Metric - ISO - Nipple adaptor ISO R - Nipple adaptor ISO R - NPT - Nipple adaptor Page 4 Page 4 Page 4 Page 4 ISO R - lat union ISO R - onical union 1503D ISO R - Hose adaptor ISO - Hose adaptor Page 5 Page 5 Page 5 Page 5 ISO - Plug with flange - hex ISO - Plug with flange - spanner ISO - Plug ISO R - Plug 1500 ISO R - Plug ISO R - Plug rass (unplated) lbow adaptors and T-connectors ISO - lbow connector ISO - ISO R - lbow connector ISO R - lbow connector ISO - Tee connector ISO R - Tee connector ISO - ISO R Tee connector ISO - ISO R Tee connector Page 7 Page 7 Page 7 ISO - ross ISO - ross block ISO - Manifold - singlesided - rass ISO - Manifold - single sided - Aluminium 1624 and 1626 ISO - Manifold - double sided - Aluminium 1624 and 1626 Page 9 Page 9 Page 9 lbow banjos ISO - anjo elbow assembly - regulating out 16K51 ISO - anjo elbow assembly - non-regulating 16A51 ISO - anjo elbow body ISO - Regulating bolt 20K00, 20L00 and 20M00 ISO - Non-regulating bolt 20A00 and 2000 Page 10 Page 10 Page 10 Page 10 Page 10 Seals Accessories opper seal anjo bolt head sealing washer anjo bolt thread sealing washer PT sealing tape D-R-12 Page 11 Page 11 Page 11 Page 11 en
3 SP and hose fittings ISO - Reducing connector 16023, copper seals ISO - ISO R - Reducing connector Projection/irst angle Model 1/8 M5 10, /4 1/ /8 1/ /8 1/ /2 1/8 15, /2 1/4 15, /2 3/8 15, /4 1/4 17, /4 3/8 17, /4 1/2 17, ISO - xpanding connector 16023, copper seals 1 1 Ø S Model 1/8 R1/ ,5 5, /8 R1/ /4 R1/ /8 R3/8 16, , /4 R3/8 16,5 11,5 13 8, /8 R3/8 27, , /8 R1/2 19,5 12 7,5 5, /4 R1/2 19, , /8 R1/2 19, /2 R1/ /4 R3/4 23,5 16,5 11, /8 R3/4 23,5 11,5 16, /2 R3/4 23, , /2 R1 26, /4 R1 27, ,5 24, ØS 1 NPT ISO R - Adaptor Ø S Model 1/8 M5 14,5 8,5 4 2, /4 1/8 20, , /8 1/8 21,5 10,5 6 5, /8 1/4 23, /2 1/4 26, /2 3/8 36, /4 1/ , ISO - ISO R - xpanding connector Ø S Model 1/8 NPT 1/8 17 9,5 6 5, /4 NPT 1/ , /8 NPT 3/ , /2 NPT 1/2 31,5 17, , ISO - NPT - Adaptor Ø S Model 1/4 R1/ ,5 7,5 5, /8 R1/8 22,5 7,5 10, /2 R1/8 31 8, /8 R1/ /2 R1/ /2 R3/8 30, /4 R3/8 38,5 12,5 16, /4 R1/ , R3/ Ø S Model 1/4 1/4 NPT /8 3/8 NPT en
4 SP and hose fittings Metric and ISO - ulkhead connector Metric - ISO - Nipple adaptor 16020, copper seals Projection/irst angle max. 1 Model M5 M10x1,0 14 3, /8 M16x1, /4 M20x1, /8 M26x1, /2 M28x1, /4 M33x1,5 36,5 6 22, M42x1,5 41,5 8 24, /4 M48x1, , A8 ISO - Sleeve adaptor Ø S Ø S1 Model M5 M5 11, ,5 2, /8 M5 14, ,5 3, /8 1/8 16, ,5 5, /4 1/ , /4 1/ /8 1/ /8 3/ /2 1/4 23, /2 3/8 24, /2 1/2 25, /4 1/2 27, /4 3/4 29, ISO R - Nipple adaptor Model M5 M /8 M5 13 7, /8 1/ /4 1/ /4 1/ /8 1/ , /8 1/ , /8 3/ /2 1/ /2 1/ /2 3/8 27, /2 1/ /4 1/ , /4 3/ / NPT - ISO R - Nipple adaptor Ø S Ø S1 Model R1/8 R1/8 19,5 7,5 7,5 5,5 5, R1/4 R1/8 23,5 11 7,5 8 5, R1/4 R1/ R3/8 R1/ ,5 7,5 11 5, R3/8 R1/4 27,5 11, R3/8 R3/ ,5 11, R1/2 R1/ ,5 15 5, R1/2 R1/4 30, R1/2 R3/ , R1/2 R1/2 33, R3/4 R1/2 37,5 16, R3/4 R 3/ ,5 16, R1 R3/ , R1 R1 46, Ø S Model 1/8 NPT R1/8 21,5 8,5 8,5 5, /4 NPT R1/ /8 NPT R3/ /2 NPT R1/ , en
5 SP and hose fittings ISO R - lat union 15033, O-ring NR Temperature: Operating pressure: bar ISO R - onical union 1503D rass, O-ring NR Temperature: Operating pressure: bar Projection/irst angle 1 øz øa øz øa 1 1 Model R1/8 33,5 10 8, R1/ , R3/ R1/ ,5 11, R3/4 56, , R Model R1/ , D1818 R1/4 33,5 11,5 9, D2828 R3/8 36, D3838 R1/ D4848 R3/ D6868 R , D8888 ISO R - Hose adaptor Metric and ISO - Hose adaptor 29217, copper seal L L Ø A L Ø Z Model 4 R1/8 32 7,5 19, R1/4 35, , R1/8 32 7,5 19, R1/4 35, , R3/ ,5 19, R1/8 32 7,5 19, R1/ , R3/ ,5 19, R1/8 32 7,5 19, R1/4 35, , R3/ ,5 19, R1/ , R1/8 32 7,5 19, R1/4 35, , R3/ ,5 19, R1/ , R1/4 35, , R3/ ,5 19, R1/ , R3/ ,5 19, R1/ , R1/4 35, , R3/ ,5 19, R1/ , R3/4 43,5 14,5 19, R3/ ,5 19, R1/ , R3/4 43,5 16,5 19, R3/8 47,5 11, R1/2 49, R3/ , R3/4 52,5 14, R1 53, R Ø A L Ø Z Model 3 M5 15,5 4 7,5 8 3, / , / , / , / , / , / , / , / , /2 35, , / , / , /2 37, , / , / , /2 37, , /4 39, , /4 41, , en
6 SP and hose fittings ISO - Plug with flange - spanner 16005, copper seal ISO - Plug with flange - hex 16206, O-ring NR Temperature: Operating pressure: bar Projection/irst angle ø D Model M5 8 4, /8 10 6, / /8 13,5 9, /2 14, / ØD Model M /8 8, / /8 12, /2 13, ISO - Plug ISO R - Plug Ø D 1 ØD Model 1/ / /8 12,5 3,5 14, / / , Model R1/8 11 7, R1/ R3/8 15,5 11, R1/2 18, R3/4 21,5 16, R ISO R - Plug ISO R - Plug rass (unplated) Model R1/8 7, R1/ R3/ R1/ Model R1/8 7, R1/ R3/ R1/ en
7 SP and hose fittings ISO - lbow connector ISO - ISO R lbow connector Projection/irst angle 1 1 Ø S Model 1/ , /4 25,5 8, / / /4 36,5 16, Ø S Model R1/8 1/ ,5 8,5 5, R1/4 1/4 25, R3/8 3/ , R1/2 1/ , R3/4 3/4 36, ,5 16, R ISO R - lbow connector Ø S Model R1/8 18 7, R1/ R3/ R1/2 29, R3/ , R en
8 15 and 16 Series SP and hose fittings ISO R - Tee connector ISO - Tee connector Projection/irst angle Ø S Model R1/ ,5 8 5, R1/ R3/8 51,5 25,5 11, R1/ , R3/ , R Ø S Model 1/ ,5 8, / , / / / ,5 16, ISO - ISO R Tee connector ISO - ISO R Tee connector Model 1/8 R1/ ,5 8 8, /4 R1/4 47,5 24, /8 R3/8 52, , /2 R1/2 61, /4 R3/4 68,5 36,5 14,5 16, R Ø S Model 1/8 R1/ ,5 8, /4 R1/ /8 R3/ , , /2 R1/ /4 R3/ ,5 14, R ISO - ross ISO - ross block Aluminium ø D H Ø S Model 1/8 39 8, / / / Ø D H Model 1/8 25 4,5 17, /4 40 5, /8 50 5, /2 50 5, en
9 SP and hose fittings ISO - Manifold - single sided rass Projection/irst angle H 1 J 2 1 J1 ø D Numbers of outputs: 4 1 ØD 1 2 H J J1 Model 1/8 1/8 81 5, /4 1/ , /8 3/ , , Numbers of outputs: 6 1 ØD 1 2 H J J1 Model 1/8 1/ , /4 1/ , /8 3/ , , ISO - Manifold - single sided 1624 and 1626 Aluminium H 1 J 2 1 ø D J1 Numbers of outputs: 4 1 ØD 1 2 H J J1 Model 1/4 1/ , ,5 32, /8 1/ , /2 3/ ,5 35 7, Numbers of outputs: 6 1 ØD 1 2 H J J1 Model 1/4 1/ , ,5 32, /8 1/ , /2 3/ ,5 35 7, ISO - Manifold - double sided 1624 and 1626 Aluminium H 1 J 1 ø D J1 Numbers of outputs: 8 1 ØD 1 H J J1 Model 1/4 1/ , ,5 32, /8 1/ , /2 3/ ,5 44 7, Numbers of outputs: 12 1 ØD 1 H J J1 Model 1/4 1/ , ,5 32, /8 1/ , /2 3/ ,5 44 7, en
10 ø S S 15 and 16 Series SP and hose fittings ISO - Regulating out banjo elbow assembly 16K51 Regulating out, with seals ody and regulating bolt: Regulating screw: brass ISO - anjo elbow assembly 16A51 Non-regulating, with seals ody and regulating bolt: Projection/irst angle ø /1 Ø S Operating pressure Model 1/ , bar max 14 16K / ,6 10 bar max 17 16K / ,6 10 bar max 22 16K / ,5 9,6 10 bar max 27 16K /1 Ø S Model 1/ A / , A / ,5 9, A / , A ISO - anjo elbow body S ø K ø ISO - anjo bolt 20A00 and 2000 Non-regulating, with seals 1 /1 Ø K Ø S Model 1/ / , / , ,5 9, / ,5 9, ISO - Regulating out banjo bolts 20K00 With seals (screwdriver adjustable), Regulating bolt: Regulating screw: brass Ø S Number banjo bodies Model 1/8 29 4,5 single 14 20A /4 31,5 8 single 17 20A /8 42,5 9,5 single 22 20A /2 47,5 11,5 single 27 20A /8 46,5 4,5 double /4 52,5 8 double /8 64 9,5 double /2 72,5 11,5 double Operating pressure Model 1/ bar max 14 20K /4 37,5 10 bar max 17 20K /8 51,5 10 bar max 22 20K / bar max 27 20K ISO - Regulating in banjo bolts 20L00 With seals (screwdriver adjustable), Regulating bolt: Regulating screw: brass ISO - i-directional banjo bolts 20M00 With seals (screwdriver adjustable), Regulating bolt: Regulating screw: brass Operating pressure Model 1/ bar max 14 20L /4 36,5 10 bar max 17 20L /8 51,5 10 bar max 22 20L / bar max 27 20L Operating pressure Model 1/ bar max 14 20M /4 37,5 10 bar max 17 20M /8 51,5 10 bar max 22 20M / bar max 27 20M en
11 SP and hose fittings Standard copper seal anjo bolt sealing washers Projection/irst angle ISO - opper sealing washer ISO - anjo bolt head sealing washer - Polyamide ISO - anjo bolt thread sealing washer - Polyamide Port size Model 1/ / / / / Port size Model 1/ / / / Port size Model M / / / / PT - sealing tape D-R-12 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI Precision ngineering, Norgren Ltd. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. en
BSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
PNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
Compression Fittings 34 Series Inch
4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata
80265 series, 3/2 Indirect solenoid actuated poppet valve
> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,
60 series, 2/2 or 3/2 Ball valve
>> Port size: Rp/..., /... >> Ideally suited for most general purpose applications >> Easy installation, simple operation and maintenance free >> -way ball valves with actuator interface conforming to
V88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
V88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
6215L Inline & NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
L Inline & NMUR series, / & / > Port size: / (ISO /NPT) or flanged with NMUR interface > Suited for outdoor use under critical environment conditions (see solenoid list) > Variable valve solenoid combination
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
97105 Inline, 3/2 & 5/2 Direct pneumatically actuated spool valves
9705 Inline, 3/ & 5/ > > : /... / (ISO G/NPT) > > Main application: single and double operated actuators > > Valves for safety systems multi-channel up to SIL 3 > > Crossover-free switching > > TÜV-approval
LB74G - EXCELON Modular System General purpose filter/regulator
LBG - EXCELON Modular System > Port size: /... / (ISO G/PFT) > Push to lock adjusting knob with optional tamper resistant accessory > Excelon design allows in-line installation or modular installation
G 1/2 30,5 A Brass NBR 0,8 3,
4/2 way poppet valves electromagnetic actuated, directly controlled /4 & /2 Working from 0 bar up Suitable for vacuum range down.33 0-2 mbar l/s Protection class : IP 65, Ex em, Ex d TEX approved (see
Nickel Plated BSP & Hose Fittings
Nicke Pated SP & Hose ittings M3, M5, 1 8" 1 1 2" SP Suitabe for use in most genera industria appications right nicke pated brass ompact design Reiabe and corrosion resistant Washers incuded where necessary
ISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
Operating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up
SCVA08, SCVA10, SCVA20 & SCVA32, 3/2 Solenoid actuated safety valve
SCV0, SCV0, SCV & SCV, / > > Port size: /4, /, /4 and (ISO G, NPT) > > Range of sizes - DN, 0, and > > Redundant valve assembly, pneumatic self monitoring with integrated safety silencer > > Ensures safe
Series 95000, 2/2 Direct solenoid actuated poppet valve
> Port size: /4 (ISO G or NPT), G/ > Working from 0 bar up > Short switching times > Suited for fine vacuum down to,33 x 0 - mbar > For a.c. solenoid systems with integrated rectifier (40... 60 Hz) > Variable
SPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Operating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
Operating pressure. N/en/en
660, 8007 NAMUR /, / & / spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple design
95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves
9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with
Flow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
M/60100/M, Slide units Magnet piston, double acting
M/000/M, Slide units > > Ø 0... 0 mm > > High quality sliding bearings ensure long durable life and high guidance performance > > Easy to install-reduces costly design time > > Double piston rod provides
26360, NAMUR. Technical data
66, 87 NAMUR /-, /- and / directional control valves Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G/ NAMUR-Interface For single and double operated actuators Manual
Operating pressure. N/en/en
660, 8007 NAMUR /, / & / way spool valves electromagnetic actuated, indirectly controlled G / and NAMUR interface For single and double operated actuators Manual override with and without detent Simple
ICO3S - 2/2, 3/2 or 5/2 poppet valves Electromagnetically actuated, direct solenoid operated
ICOS - /, / or / poppet valves > > Port size: /... / (ISO G / NPT) Namur or manifold > > Control of pneumatic or hydraulic operated equipment > > Direct acting solenoid valve > > High flow > > bar inlet
ICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled
ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of
RM/28000/M, ISO cylinder Magnetic piston, single acting
> > Ø 0... 5 mm > > Standard magnetic piston for full control system versatility > > Nose mounting nut and piston rod locknut as standard > > Conforming to ISO > > Optional port arrangement for compact
26360, 80207, 3/2, 5/2 & 5/3 Indirect solenoid actuated spool valves
66, 87, /, 5/ & 5/ > > Port size: G/ & G/ > > Compact design > > Easily interchangeable solenoid > > tandard manual override > > ll valves available with Ex protected coils (TEX or other international
B64G - Olympian Plus plug-in system Filter/regulator
BG - Olympian Plus plug-in system > > Port size: /... / (ISO G/PTF) > > High efficiency water removal > > Diaphragm and balanced valve design ensure good regulation characteristics > > on-rising adjusting
97105 Inline direct pneumatically actuated 3/2 and 5/2 spool valves G 1/4.G1/2, 1/4 NPT 1/2 NPT
direct pneumatically actuated 3/ and 5/ spool valves G /.G/, / NPT / NPT For single and double operated actuators Valves for safety systems up to SIL () Crossover-free switching, switch-over function guaranteed
R./57100/M, R./57300/M, Roundline cylinder Magnetic piston, single acting
R./700/M, R./700/M, Roundline cylinder > >... 0 mm > > Saves 0% space over the basic length of a corresponding ISO/ VDM cylinder > > Standard magnetic piston for full control system versatility > > Low
3/2 Directional control valves Direct solenoid operated poppet valves Internal thread G 1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Direct solenoid operated poppet valves Internal thread G /, / NPT or flanged with NAMUR interface Main application: single operated actuators for plants TÜV-approval based
RM/92000/M, Short stroke cylinder Magnetic piston, double acting
> Ø... 00 mm > One third the basic length of a corresponding ISO/VDM model > Fully non-corrodible specification > Standard magnetic piston for full control system versatility > Low friction, long life
Flow. (l/min) (ms) N/en
66, 87 Inline / & / spool valves electromagnetic actuated, indirectly controlled G / & G / For single and double operated actuators Manual override with and without detent imple design of soft seal spool
PL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
98015 series, 3/2 Direct solenoid actuated poppet valve
90 series, / > Port size: / & / (ISO G/NPT), NAMUR Interface > Main application: Single acting actuators > TÜV-approval based on type eamination DGRL 9//EG and IE 0, multichannel up to SIL > Optional add-on
Material pressure (bar) (Cv (US) kv x 1,2 Seat
00 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V Valves for safety systems up to SIL Solenoid valve also
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
24011 series, 3/2 Direct solenoid actuated poppet valve
0 series, / > Port size: / (ISO G or NPT), NAMUR Interface > Add-on manual override or inductive limit switches on request > Main application: Single and double acting actuators > TÜV-approval based on
97105 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
705 Inline 3/, 5/ & 5/3 spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Valves for safety systems up to SIL (IEC 6508) Crossover-free
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
97105 NAMUR. Technical data. Ordering information and accessories See page 6 and 7
90 NAMUR /, / and / directional valves Actuation: electromagnetic Indirectly controlled soft seal spool valves Port size: G /, / NPT, G /, / NPT NAMUR-interface For single and double operated actuators
3/2 Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G/, / NPT or flanged with NMUR interface Main application: single operated process actuators TÜV-approval
97105 Inline 3/2, 5/2 & 5/3 way spool valves electromagnetic actuated, indirectly controlled G1/4, 1/4 NPT, G1/2, 1/2 NPT
70 Inline 3/, / & /3 way spool valves electromagnetic actuated, indirectly controlled G/, / NPT, G/, / NPT Main application: single and double operated actuators TÜV-approval based on type examination
Material Seat seal. N/en
0 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR interface TÜV-approval based on IEC 6 8 Valves for safety systems up to SIL Standard NAMUR type - redundancy:
97105 NAMUR, 3/2, 5/2 & 5/3 Indirect electromagnetic actuated spool valves
970 NAMUR, /, / & / > > Port size: / or / ISO G/NPT > > Main application: single and double operated actuators > > TÜV-approval based on type examination DIN EN, DIN 9 and IEC 08 > > Valves for safety
Insert Fittings. KF Series
Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is
LF 3600 Nickel-Plated Brass Instant Fittings
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial
Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
Technical features. N/en
/, 5/ & 5/ spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface For single and double operated actuators Exhaust air recirculation at way
26230, Inline 3/2, 5/2 and 5/3 way soft seal spool valves electromagnetic actuated, indirectly controlled G 1/4, G 1/2
/, / and / way soft seal spool valves electromagnetic actuated, indirectly controlled /, / traight-through flow, high v-factor tandard manual override ompact design asily interchangeable solenoid system
General Characteristics DM 80 Series - JIS Metric Tube
General haracteristics DM 80 Series - JIS Metric Tube Introduction Fitting Material Specifications K = Stainless Steel G = arbon Steel = opper Nickel 70/30 = opper Nickel 90/10 D = Duplex Z = Super Duplex
pneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
V03, V04 and V05 Series
V03, V04 and V05 Series / and 3/ Poppet Valves Electrically Actuated G 1 8, G 1 4, CNOMO and Interface Extensive range of power and orifice size options Removable coil Manifold rail for 1 to 0 valves Operating
Radiator Lockshield Valves ADN.. AEN..
07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated
UNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
brass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
/2 way indirect solenoid operated valves G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 / way indirect solenoid operated valves G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to SIL (IE 6508) dd-on manual
Composite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
VCB22, 5/2 Solenoid actuated In-line spool valves
, / olenoid actuated nline spool valves >> ort size:, /... / ( ) >> ew design for industrial automation >> igh flow rate >> onnector with light as standard >> aintenancefree >> ubbase system for easy assembly
F250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
98025 NAMUR 3/2 poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR / poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
Technical features. 12/ f. N/en
/, / & / way spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT or flanged with NAMUR interface Main application: single and double operated actuators TÜV-approval based
push-to-connect fittings system LF3000
legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris
SPARE PARTS LIST CP COMPRESSOR. Model CPD CPD 75
SPARE PARTS LIST CP COMPRESSOR Model CPD 75-00 EN 05 0 5 CPD 75 CONTENTS Title Page MAINTENANCE HOW TO READ THIS SPARE PART LIST? MAINTENANCE KITS STANDARD UNITS MOTOR-COMPRESSOR UNIT -7 AIR CIRCUIT -9
Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
General Characteristics DP 04 Series - Metric Pipe CuNi
General haracteristics DP 04 Series - Metric Pipe uni Fitting Material Specifications = opper Nickel 70/30 = opper Nickel 90/10 O-Ring Material Specifications Material Specification MIL-71500 MIL-70600
SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
Flow control valves Series SCU, MCU, SVU, MVU, SCO, MCO
S E R I E S SCU MCU SVU MVU SCO Flow control valves Series SCU, MCU, SVU, MVU, SCO, Unidirectional and bidirectional banjo flow controllers Ports M, G1/8, G1/4, G3/8, G1/2 A U T O M A T I C These unidirectional
V GM C4500 C5500
Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual
Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
G 3000 OH ( ) 650 Spare parts list G 3050 ( ) 10 Frame 20 Pump set. 23 Cylinder head
Table of contents G 3000 OH (.07-28.0) 650 Spare parts list G 3050 (9.39-203.0) 0 Frame 20 Pump set 2 Cylinder head 4 Valve (3 Stück) (2.884-96.0) 4 Nozzle insert only for replacement (4.769-034.0) 22
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94 SINCE 1998 PREVIOUSLY PAC FAB 1 2 3 KEY 4 4654-25 KEY 4 4654-69 KEY 8 4654-30 20 4 5 7 6 KEY 8 4654-74A KEY 9 4654-23 8 9 10 12 13 KEY 23 4601-4801 KEY 19 4650-14A
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Viega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
Front View. Right Section View. Back View. Assy. Number Assy. Description A Control unit, MDU. Date 08.
18 av 94-2013-11-05 Front View Right Section View Back View 2011-10-14 Date 08 Revision Drawn KRT 6400007 Control unit, MDU 1:2 19 av 94-2013-11-05 1 Tighten lens nuts very carefully, lenses break easily
PGS10 Series Pressroom Gripper System
PGS10 Series Unique, patented, modular design uses common components to reduce your purchase price and stocking requirements. Features a robust hardened steel chassis and grip force up to 450 lb at 80
V87 series - Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V87 series - Redundant valve manifold systems - Semi modular oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Herion valves > > Stainless steel visual status indicators
Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP
Compressed Air Systems Pneumatic Fittings LLDPE Tube
John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright
Quality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
Tech Tubes & Fittings. An ISO 9001: 2008 Company
Tech Tubes & Fittings An ISO 9001: 2008 Company The Company Tech Tubes & Fittings is a highly acclaimed manufacturer and exporter of products like Instrumentation/Tube Fittings, Pipe Fittings, Flanges
Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.
Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast