HVR-HD1000U/HD1000N/HD1000E/ HD1000P/HD1000C

Transcription

1 HVR-HD1000U/HD1000N/HD1000E/ HD1000P/HD1000C SERVICE MANUAL Ver Revision History Revised-1 US Model Canadian Model AEP Model E Model Chinese Model Replace the previously issued SERVICE MANUAL with this manual. N MECHANISM (MDX-N220) Link SPECIFICATIONS MODEL INFORMATION TABLE SERVICE NOTE DISASSEMBLY BLOCK DIAGRAMS FRAME SCHEMATIC DIAGRAMS SCHEMATIC DIAGRAMS PRINTED WIRING BOARDS REPAIR PARTS LIST ADJUSTMENTS INSTRUCTION MANUAL The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. DIGITAL HD VIDEO CAMERA RECORDER Sony EMCS Co. 2007L Published by Kohda TEC

2 NOTE 5. REPAIR PARTS LIST (1/2) TO (2/2) NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. EXPLODED VIEWS Link A OVERALL SECTION-1 B GRIP SECTION E CABINET (R) SECTION F HANDLE (TALLY) SECTION LENS SECTION I HANDLE (COVER) SECTION D OVERALL SECTION-2 G VIEW FINDER SECTION H LCD PANEL SECTION L J K OVERRALL SECTION-3 BATTERY PANEL SECTION N O P LS/MECHANICHAL CHASSIS BLOCK ASSEMBLY-1 LS/MECHANICHAL CHASSIS BLOCK ASSEMBLY-1 M CABINET (L) SECTION C MECHANISM DECK SECTION G BLOCK SECTION

3 NOTE 5. REPAIR PARTS LIST (2/2) TO (1/2) NOTE: Characters A to Z of the electrical parts list indicate location of exploded views in which the desired part is shown. Link ELECTRICAL PARTS LIST ACCESSORIES BA-008 BOARD K FP-784 FLEXIBLE BOARD G MC-188 BOARD I BH-001 BOARD G FP-785 FLEXIBLE BOARD L MO-027 BOARD C BL-015 BOARD G FP-867 FLEXIBLE BOARD L MS-379 BOARD J CM-077 BOARD E HI-078 BOARD G NS-022 BOARD B DC-110 BOARD K HP-150 BOARD K PD-342 BOARD H EC-001 BOARD E IF-155 BOARD L RE-038 BOARD H FP-031 FLEXIBLE BOARD P JK-355 BOARD M SP-048 BOARD C FP-032 FLEXIBLE BOARD P JS-003 BOARD M US-014 BOARD J FP-228 FLEXIBLE BOARD P LD-229 BOARD E VC-500 BOARD L

4 5. REPAIR PARTS LIST NOTE: -XX, -X mean standardized parts, so they may have some differences from the original one. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. The mechanical parts with no reference number in the exploded views are not supplied. Due to standardization, replacements in the parts list may be different from the parts specified in the diagrams or the components used on the set. CAPACITORS: uf: µf COILS uh: µh RESISTORS All resistors are in ohms. METAL: metal-film resistor METAL OXIDE: Metal Oxide-film resistor F: nonflammable SEMICONDUCTORS In each case, u: µ, for example: ua...: µa..., upa..., µpa..., upb..., µpb..., upc..., µpc..., upd..., µpd... When indicating parts by reference number, please include the board name. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. Color Indication of Appearance Parts Example: (SILVER) : Cabinet s Color (Silver) : Parts Color Abbreviation AR : Argentine model AUS : Australian model BR : Brazilian model CH : Chinese model CND : Canadian model EE : East European model HK : Hong Kong model J : Japanese model JE : Tourist model KR : Korea model NE : North European model 5-1

5 Ver The changed portio from Ver. 1.0 are shown in blue EXPLODED VIEWS OVERALL SECTION-1 5. REPAIR PARTS LIST DISASSEMBLY #100 #100 Grip Section (See Page 5-3) Overall Section-2 (See Page 5-5) Cabinet (R) Section (See Page 5-4) #103 3 #100 # # BASE, GRIP * BRACKET (F), GRIP BELT FRAME, GRIP CABLE, FLEXIBLE FLAT (FFC-337) 5 X PAD ASSY, SHOULDER SHEET (JAPAN) (HD1000U) SHEET (JAPAN) (HD1000N) SHEET (JAPAN) (HD1000P) SHEET (JAPAN) (HD1000E) SHEET (JAPAN) (HD1000C) SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) # SREW (M2), LOCK ACE, P2 (Black) # SCREW +PTT 2.6X10 (S) (Silver) # SCREW +B 3X8 (Black) 5-2

6 GRIP SECTION X CABINET ASSY, GRIP BELT, GRIP SWITCH BLOCK, CONTROL (ZM90500) BRACKET (B), GRIP BELT SWITCH BLOCK, CONTROL (PS90500) * PLATE, SS RETAINER 57 A A NS-022 BOARD, COMPLETE SCREW, TAPPING, P2 (Black) 5-3

7 CABINET (R) SECTION : not supplied #105 SP MO RING, ORNAMENTAL 102 X CABINET (R) ASSY * BRACKET (UPPER), LR * BRACKET, CHASSIS CABLE, FLEXIBLE FLAT (FFC-336) 106 A A SP-048 BOARD, COMPLETE 107 A A MO-027 BOARD, COMPLETE SP LOUD SPEAKER (1.6CM) SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) # SCREW (M2), NEW TRUSTER, P2 (Red) 5-4

8 DISASSEMBLY OVERALL SECTION-2 Handle (Tally) Section (See Page 5-7) (9mm x 28mm) Le Section (See Page 5-6) CAUTION : For the part of 154, cut SHEET, LENS FLEXIBLE ( ) into the desired length and use it CABLE, FLEXIBLE FLAT (FFC-340) HARNESS (LI-062) * FRAME (R) 154 CAUTION TAPE AS SCREW (M2), NEW TRUSTER, P2 (Black) 5-5

9 LENS SECTION : not supplied (Note) (IC6701) 209 CM-077 #23 #1 # # (9mm x 28mm) LD-229 # #3 212 Note: Be sure to read Precautio for Replacement of Imager on page 4-3 when changing the imager. CAUTION : For the part of 213, cut SHEET, LENS FLEXIBLE ( ) into the desired length and use it. 201 X PANEL ASSY, F 202 A A EC-001 BOARD, COMPLETE CABLE, FLEXIBLE FLAT (FFC-339) * FRAME (L) (905) LENS 205 A A LSV-1190A (SERVICE) FILTER BLOCK, OPTICAL RUBBER (1190), SEAL 208 A A CMOS BLOCK ASSY (CMOS IMAGER) (Note) 209 A A CM-077 BOARD, COMPLETE (SERVICE) CLAMP, FLEXIBLE * FRAME (R (905)), LENS 212 A A LD-229 BOARD, COMPLETE 213 CAUTION TAPE AS # SCREW (M1.7) (Black) # SCREW (M1.7), NEW TRU-STAR, P2 (Red) # SCREW, TAPPING, P2 (Black) SCREW, TAPPING, P2 (Black) 5-6

10 DISASSEMBLY HANDLE (TALLY) SECTION : not supplied # Handle (Cover) Section (See Page 5-10) #53 #23 View Finder Section (See Page 5-8) X CABINET ASSY, TALLY (FRONT) 252 X HOLDER ASSY, MICROPHONE RUBBER, MICROPHONE HOLDER SHEET, RUBBER ADHESIVE RUBBER, MICROPHONE BASE, RING # SCREW, TAPPING, P2 (Black) SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) # SCREW, TAPPING, P2 (Black) # SCREW +P 2.6X8 (Black) 5-7

11 DISASSEMBLY VIEW FINDER SECTION : not supplied # LCD # # # LCD Panel Section (See Page 5-9) X CABINET (UPPER) ASSY, VF COVER, HINGE (LOWER) 303 A A FP-784 FLEXIBLE BOARD, COMPLETE * FRAME, VF 305 A A BH-001 BOARD, COMPLETE SPACER, LCD * CABINET (222), INNER CABINET, VF INNER 319 X CABINET (LOWER) ASSY, VF * KNOB, ON/OFF * FRAME, HI 307 A A HI-078 BOARD, COMPLETE 308 X HINGE ASSY, VF HARNESS (BI-001) CABLE, FLEXIBLE FLAT (FFC-338) 311 A A BL-015 BOARD, COMPLETE GUIDE, LAMP * CUSHION, LCD * ILLUMINATOR * PLATE (TFT), DEFLECTION 5-8 * RETAINER, ON/OFF KNOB 322 X ADJUSTMENT ASSY, VISIBILITY CORE, FERRITE LCD LCX076AKE-1 # SCREW, TAPPING, P2 (Black) SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) # SCREW (M2), NEW TRUSTER, P2 (Red)

12 LCD PANEL SECTION LCD # PD # (2.2mm x 3mm) CAUTION: For the part of 354, cut SHEET, ADHESIVE ( ) into the desired length and use it. 351 A A RE-038 BOARD, COMPLETE HARNESS (RS-112) COVER (REAR), HINGE 354 CAUTION SHEET (MAGNET), ADHESIVE MAGNET (011) 356 X HINGE ASSY HARNESS (HP-147) COVER (FRONT), HINGE CABINET (M), P * PLATE (P), GROUND CUSHION, TP FRONT FRAME (2.7J) PRISM SHEET V (2.7) PRISM SHEET H (2.7) DIFFUSION SHEET (2.7) AG SHEET (2.7) LIGHT GUIDE (2.7) REFLECTION SHEET (2.7J) 369 A A PD-342 BOARD, COMPLETE * CLIP GUARD, FLEXIBLE CABINET (C), P LCD901 A A TP BLOCK ASSY (27ESHGU07) # SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) # SCREW (M2), NEW TRUSTER, P2 (Red) 5-9

13 DISASSEMBLY HANDLE (COVER) SECTION #107 : not supplied 410 # # # # # #106 # * BRACKET, TALLY CABINET, TALLY (LR) COVER, HANDLE LOWER 404 A A MC-188 BOARD, COMPLETE * BRACKET, MICROPHONE JACK HARNESS (MI-075) FP-793 FLEXIBLE BOARD * KEY, RUBBER TACT 409 X COVER ASSY, HANDLE SHOE, ACCESSORY * PLATE (B), HANDLE 412 X HANDLE ASSY Overall Section-3 (See Page 5-11) BRACKET (R), STRAP * PLATE (A), HANDLE * PLATE (C), HANDLE BRACKET (F), STRAP CABLE, FLEXIBLE FLAT (FFC-329) # SCREW, TAPPING, P2 (Black) SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) # SREW (M2), LOCK ACE, P2 (Black) # SCREW (M2), NEW TRUSTER, P2 (Red) # SCREW (M2X6) (Black) # (+) K SCREW M2 (Silver)

14 DISASSEMBLY OVERALL SECTION-3 : not supplied Battery Panel Section (See Page 5-12) # # Refer to page 5-1 for mark 0. Cabinet (L) Section (See Page 5-14) CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. G Block Section (See Page 5-13) Note: Replace the battery holder (BH8001) together when replacing the lithium battery (BT901) on the MS-379 board. (The battery holder removed once cannot be used again.) When mounting these parts, mount new battery holder first and attach new lithium battery next. 452 #3 BH8001 (Note) BT901 (Note) 451! : BT901 (BATTERY, STORAGE, LITHIUM) Board on the mount position. (See page 4-56) * BRACKET, MS 452 A A MS-379 BOARD, COMPLETE * BRACKET, USB CABLE, FLEXIBLE FLAT (FFC-107) 455 A A US-014 BOARD, COMPLETE HARNESS (MI-076) 457 X DOOR ASSY, MD HARNESS (BD-058) HARNESS (IJ-001) HARNESS (IJ-002) HARNESS (DI-003) HARNESS (DI-004) HARNESS (DI-005) FILTER, CLAMP (FERRITE CORE) 0 BH HOLDER, BATTERY 0 BT BATTERY, STORAGE, LITHIUM # SCREW (M1.7) (Black) # SCREW (M1.7), NEW TRU-STAR, P2 (Red) SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) # SCREW (M2), NEW TRUSTER, P2 (Red) 5-11

15 BATTERY PANEL SECTION : not supplied (CN0651) #105 # Refer to page 5-1 for mark 0. * PLATE, DC TERMINAL RETAINER 502 A A DC-110 BOARD, COMPLETE 503 A A HP-150 BOARD, COMPLETE * PLATE, HP TERMINAL RETAINER 505 X PANEL ASSY, JACK 0506 A A BA-008 BOARD, COMPLETE COVER (DC), JACK COVER (HP), JACK COVER (LANC), JACK 510 X PANEL ASSY, BT CLAW, BT LOCK * PLATE, BT RELEASE RETAINER SCREW, TAPPING, P2 (Black) # SCREW (M2), NEW TRUSTER, P2 (Red) 5-12

16 DISASSEMBLY G BLOCK SECTION : not supplied Mechanism Deck Section (See Page 5-15) 564 # #1 567 # #15 VC # CABLE, FLEXIBLE FLAT (FFC-332) CABLE, FLEXIBLE FLAT (FFC-330) FP-789 FLEXIBLE BOARD FP-788 FLEXIBLE BOARD CABLE, FLEXIBLE FLAT (FFC-335) CABLE, FLEXIBLE FLAT (FFC-334) 557 A A IF-155 BOARD, COMPLETE * HOLDER, IF FP-787 FLEXIBLE BOARD * BRACKET, HDMI HARNESS (HN-047) 562 A A VC-500 BOARD, COMPLETE (NTSC: HD1000U/HD1000N) 562 A A VC-500 BOARD, COMPLETE (PAL: HD1000E/HD1000P/HD1000C) 563 X FRAME ASSY (905), MD 564 A A FP-785 FLEXIBLE BOARD, COMPLETE FP-786 FLEXIBLE BOARD 566 A A FP-867 FLEXIBLE BOARD, COMPLETE * HEAT SINK, VC # SCREW (M1.7) (Black) # SCREW (M1.7), NEW TRU-STAR, P2 (Red) # SCREW (M1.4X1.5) (Silver) SCREW, TAPPING, P2 (Black) SCREW (M2), NEW TRUSTER, P2 (Black) 5-13

17 CABINET (L) SECTION : not supplied # # # # * BRACKET (LOWER), LR * FRAME, MAIN, F * GASKET (LE) 604 X CABINET (L) ASSY COVER (HDMI), JACK LID, CPC COVER (F), PIN JACK COVER (R), PIN JACK * FRAME, MAIN, T * BUTTON, RESET * TALLY, MS * FRAME, MAIN, R 5-14 * BASE, SHOULDER PAD FITTING * FRAME, MAIN, B PURSE LOCK (DIA.15) BRACKET (TRIPOD) 617 A A JS-033 BOARD, COMPLETE 618 A A JK-355 BOARD, COMPLETE * PLATE, JK GROUND LABEL, FUSE SCREW, TAPPING, P2 (Black) # SCREW +PTT 2.6X5 (S) (Black) SCREW (M2), NEW TRUSTER, P2 (Black)

18 MECHANISM DECK SECTION : not supplied M LS chassis block assembly (See page 5-16) X PENDULUM ASSY BASE, LED SCREW, PRECISION +P 1.4X RELEASE, REEL LOCK SCREW (M1.4X1.4), SPECIAL HEAD 706 X CASSETTE COMPARTMENT ASSY SPRING (ARM S), TENSION COIL SCREW (M1.4) PLATE, TOP SPRING (ARM T), TENSION COIL SHEET, FLEXIBLE ADHESIVE TG6 CATCHER 713 A A MD (N220) SUB ASSY (S) A SCREW (M1.4X2.0), SPECIAL HEAD WASHER M901 A A DRUM (DEH-33E-R) 5-15

19 Ver The changed portio from Ver. 1.0 are shown in blue. 5. REPAIR PARTS LIST LS/MECHANICAL CHASSIS BLOCK ASSEMBLY-1 : not supplied (Note) 772 (Note) LS / Mechanical chassis block assembly-2 (See page 5-17) 755 Note: These two screws are the fixing screws of the LS cam plate. These two fixing screws are used for adjsting the LS cam plate position. (refer to 4-2. LS cam adjustment of 6-2. MECHANISM SECTION ADJUSTMENTS) SPRING, RVS BRAKE 752 A A BRAKE BLOCK ASSY, RVS POSITIONING (S) 754 A A BRAKE BLOCK ASSY, S SCREW (M1.4X1.4), SPECIAL HEAD 756 X TABLE ASSY, S REEL 757 A A REGULATOR BLOCK ASSY, TENSION GEAR (T), GL SPRING, TENSION REGULATOR 760 X TABLE ASSY, T REEL 761 X ARM ASSY, PINCH SPRING (PINCH RETURN), TORSION SPRING (TG6 RETURN), COIL 764 A A TG6 BLOCK ASSY 765 X ARM (S) ASSY, GL 766 X COASTER (S) ASSY RAIL SCREW (M1.4X2.0), SPECIAL HEAD 769 X COASTER (T) ASSY 770 X ARM (T) ASSY, GL SPRING (T), GL TORSION SCREW (M1.4X1.4), SPECIAL HEAD (for adjustment) 5-16

20 LS/MECHANICAL CHASSIS BLOCK ASSEMBLY-2 : not supplied Q901 D902 Q902 S901 M MIC903 H901 FP-031 (Note 1) H (Note2) FP-032 (Note 1, 2) 804 FP-031 (Note 1) Note1: The FP-031 and FP-032 are supplied as the assembled part of the MD (N220) sub ass'y (S) A by attaching them with the adhesive agent. These parts are not separately supplied because assembling of these parts requires high accuracy. Note2: The mode switch (S903) function works when the contactor of the FP-032 contacts with the bottom surface of wiper of the mode gear ass'y SPRING (PINCH LIMITTER), COIL 802 X SLIDER ASSY, MODE 803 X GEAR ASSY, CAM SCREW (M1.4X1.4), SPECIAL HEAD GEAR, RELAY BASE, MOTOR HOLDER FP-228 FLEXIBLE BOARD (DEW SENSOR) COVER, CAPSTAN MIC COVER SCREW (M1.4X2.0), SPECIAL HEAD WASHER GEAR, CONVERSION HEAD (SCREW M1.2) 810 X BASE ASSY, CAM 811 X GEAR ASSY, MODE GEAR, NO GEAR, NO HOLDER, MOTOR SCREW (M1.2X2), SPECIAL, SHAFT (2J), WORM D DIODE GL453SE0000F (TAPE LED) H ELEMENT, HOLE HW-105A-CDE-T (S REEL) H ELEMENT, HOLE HW-105A-CDE-T (T REEL) M902 X MOTOR ASSY (LOADING) MIC PIN, CONNECTOR (WITH DETECTION) Q TRANSISTOR PT4850FJE00F (TAPE END) Q TRANSISTOR PT4850FJE00F (TAPE TOP) S SWITCH, PUSH (1 KEY) (CC DOWN) 5-17

21 Checking supplied accessories. Note: This item is supplied with the unit as an accessory, but is not prepared as a service part. AC Adaptor AC-L Power Cord (US, CND) (AEP, E) (CH) Operating Guide (ENGLISH) (HD1000U/HD1000N) (ENGLISH) (HD1000E/HD1000P) (SIMPLIFIED CHINESE) (HD1000C) A/V Connecting Cable Conversion 2P Adaptor (E) CD-ROM ( Manuals for Digital HD Video Camera Recorder ) Eye cup Le Hood X Rechargeable Battery Pack NP-F570 (Note) Le Cap X Operating Guide (PDF) The CD-ROM supplied contai all of language version of the Operating Guide (PDF) for printing. The printed matter is not supplied. If required, please order it with the part number below (ENGLISH) (FRENCH) (ENGLISH) (SIMPLIFIED CHINESE) (FRENCH) (SPANISH) (ITALIAN) (GERMAN) Wind Screen Microphone Refer to page 5-1 for mark E