drylin specialists drylin Specialists Telescopic guides Measuring systems Roller guides Square linear guide Slide disks

Transcription

1 drylin Specialists Telescopic guides Measuring systems Roller guides Square linear guide Slide disks 865

2 drylin Specialists Product Overwiew drylin NT Telescopic rails ubrication-free solid polymer/aluminum guide for continuous lengths up to 1,200 mm extension. page 867 drylin NT Telescopic rails with locking mechanism The proven drylin N telescopic system is now available with a locking mechanism. page 868 There are two different versions: a) Detent in end and centre positions b) Precision detent with variable pitch (minimum pitch 10 mm) page 866 drylin WKM Digital measuring systems The drylin WKM measuring systems are battery powered. The integrated battery has a life of at least two years. Magnetic tapes fitted as standard. The position value is displayed on a 5-digit C display. page 869 drylin WKMEX Measuring system Much less space is required for the latest drylin WKMEX measuring device. The sensor head is integrated in the carriage (total height 36 mm). There are three sensor types available, two are compatible with TT ine Driver. We recommend igus E-Chain series E2 micro or Easy Chain for guiding the signal cable. page 870 drylin WJRM Hybrid bearing An additional drylin W solution is the combined rolling and sliding carriage. In the defined load direction the required drive force is reduced by the maintenance free roller bearing. page 872 drylin Q Torque-resistant square guide drylin Q is the new torque resistant linear slide for the spacesaving handling of small parts. Four liners made of iglidur J run on a hard anodized aluminum square tube. This unit is light weight, compact and 100 % lubrication-free. page 871 drylin round slide disk The drylin Slide disks from stock (RSDJ Round Slide disk) made from the high performance material iglidur J have many applications. Without additional lubricant, heavy loads can be moved over a variety of surfaces (steel, aluminum, stainless steel, etc.) with very low friction. The plates are fixed securely with a screw through the reinforced hole in the centre. page More information

3 Telescopic Rails Product Range drylin NT-35- Total extension Solid polymer guide/aluminum guide ow weight Cost-effective Corrosion-resistant Continuous lengths up to 1,200 mm (total extension) NT-35- Total extension C5 = mm 60 C6 C6 = 20 49,5 mm 60 C5 NT Retracted length Rail width: 35 mm Telescopic-System NT Over-extension 20 NT Over extension (e.g. telescoped length 300 mm, extended length 620 mm; Over extension max. 20 mm) Retracted length Rail width: 35 mm Telescopic-System NT B Partial extension NT b b Fmax = 75 N (200 mm/) Partial extension (e. g. telescoped length 300 mm, extended length 500 mm) Retracted length Rail width: 35 mm Telescopic-System H M4 Recommendation: Fmax calculated using this formula allows an easy manual use. The unit can take higher forces than this, but the required driving force will be correspondingly higher. Part number b H min. max. NT-35- mm igus GmbH Cologne Phone +49 (0) Fax -334 info@igus.de 867

4 drylin Telescopic Rails Product Range With locking mechanism NT-M Retracted length Rail width: 35 mm ocking Mechanism Telescopic-system The proven drylin N telescopic system is now available with a locking mechanism. There are two different versions: a) Detent in end and centre positions b) Precision detent with variable pitch (minimum pitch 10 mm) Solid polymer/aluminum guide ow weight, quiet running Cost-effective Corrosion-resistant, 100 % lubrication-free Continuous lengths up to 1,200 mm (extended total length) C5 = mm B 60 C6 = mm 60 C5 H 20 M4 35 Fmax = 75 N (200 mm/) drylin NT-M in adjustment of Perspex guard drylin NT-M in guard door adjustment in machine tool drylin Detent in end and centre position at full extension Part number B H min max NT-M mm individual precision detent on request delivery time 3 8 days prices price list online 868 ifetime calculation, CAD files and much more support

5 Measuring Systems Product Range drylin The drylin WKM measuring systems are battery powered. The integrated battery guarantees two year operating time. This means a virtually absolute distance measurement is possible. Magnetic tapes fitted as standard. The position value is displayed on a 5-digit C display. Measuring principle: magnetic with magnetic tape ( mm) Resolution: 0.1 mm Accuracy: ±( measured length [m]) mm Service life: over 5 years at 100 % switch-on time Application temperature: +0 to +60 C Display: CD Repeat accuracy:±1 Digit Absolute and incremental measuring method Flexible and mobile use Variable zero point Carriage can be clamped Display optionally right (R) or left () of guide carriage Max. rail length 4,000 mm (Effective measurement max. 3,757 mm) Type series WKM-10 and -20 E H For the series 10 and 20 the rails are fixed and the measuring carriage moves. Part number drylin linear guide H E WKM WK * WKM R WK * WKM WK * WKM R WK * * Dimensions rail/slide drylin W chapter, page 763 Type series WKM-11 For the series 11, the carriage is fixed with 4 screws. The rail moves, the end of the rail is the fixing point. Part number C4 C5 a1 C2 A2 K1 C A H S Cm Hm kz max. WKM , igus GmbH Cologne Phone +49 (0) Fax -334 info@igus.de 869

6 drylin Measuring Systems Product Range Measuring-system with external signal output WKMEX Much less space is required for the latest drylin WKMEX measuring device. The sensor head is integrated in the carriage (total height 36 mm). There are three sensor types available, two are compatible with TT ine Driver. We recommend igus E-Chain series E2 micro or Easy Chain for guiding the signal cable. Ready-to-fit measuring device for external signal output With 4 edge trigger mode (setting parameters of the display or control, for example, IW4) and +20 C ambient temperature: Resolution: ±( ) = measuring length in metres; Repeatability: ±0.025 mm With 1 edge trigger mode (setting parameters of the display or control, for example, IW1) and +20 C ambient temperature: Resolution: ±( ) = measuring length in metres; Repeatability: ±0.025 mm Small sensor with integrated evaluation unit Energychain not included in product Signal cable K2 Rail length Number of complete carriages Sensor version in Table ength of signal cable (m) A2 A C2 C H2 Part number H2 C C2 A A2 K2 Resolution WKMEX M6 0.1 Versions Sensor type Nominal voltage Output power Max. length of signal cable V V 30 m V TT ine Driver 50 m 11 5 V TT ine Driver 10 m delivery time from stock prices price list online 870 ifetime calculation, CAD files and much more support

7 Q Square Guide Product Range drylin Torque-resistant square guide QJRMT Square section tube made of hard-anodized aluminum Closed anodized aluminum housing Torque resistant without 2nd guidance Tolerates moments up to 10 Nm Space saving and low weight Cable guidance possible in tube Unsupported installation ubrication-free Dimension across flats Pillow block, short Tandem (optional) Metric Form of Housing, closed iglidur J bearings Square design Part number Weight A H drylin Q rail profile [kg] ±0. 02 AWMQ Part number Weight A H H1 dq Qa Qi E1 E2 d drylin Q Housing Bearing [kg] ±0.02 ±0.15 ±0.15 QJRMT QJRM Part number Weight k d2 Bf d Qa Qi d3 dt d B drylin Q Flange Bearing [kg] h7 ±0.15 ±0.15 QJFMT QJFM delivery time from stock prices price list online igus GmbH Cologne Phone +49 (0) Fax -334 info@igus.de 871

8 drylin WJRM Hybrid Bearing Product Range Hybrid bearing roll and slide drylin W Hybrid bearings offer a unique combination of plain and roller bearings. At a defined installation position, the required driving torque reduces significantly due to the maintenance-free roller bearings. Shear forces and shock loads are absorbed by the plain bearing. The hybrid bearing is ideal for manual adjustments, especially in door slides. C1 Shaft-mounted plastic rollers C3 iner made of iglidur J ow drive force needed, friction: µ Cost-effective Can be combined with 7 linear profile rails A3 G1 WJRM WJRM K3 H B2 A1 K2 B Q2 Q1 Shown installation position is not possible for combination of WJRM with rail WS-10/WS-10-40/WS drylin W Housing Bearing, Round oad Data and Part number Static load capacity Co Dyn. load capacity Cz+ F v at total running distance (km max. [N] [N] [N] [N] [N m/s] WJRM WJRM WJRM drylin W Housing Bearing oad Data and Part number Friction in Weight B B2 C1 C3 G1 A3 A1 K2 K3 Q1 Q2 +z direction [g] [N] WJRM < M6 M5 WJRM < M8 M WJRM < M8 M drylin W guide rail page 770 delivery time from stock prices price list online 872 ifetime calculation, CAD files and much more support

9 WJRM Hybrid Bearing Application Examples drylin Adjustment of control panel unit Adjustment of sliding door tool magazine Adjustment of wood panel Adjustment of camera mounting slide igus GmbH Cologne Phone +49 (0) Fax

10 drylin Round Slide Disk Product Range drylin round slide disk RSDJ s Thickness Outer-Ø iglidur J Round slide disk Da K Material: iglidur J page 79 The drylin slide disks from stock (RSDJ round slide disk) made from the high performance material iglidur J have many different applications. Without additional lubricant, heavy loads can be moved over a variety of surfaces (steel, aluminum, stainless steel, etc.) with very low friction. The plates are fixed securely with a screw through the reinforced hole in the centre. Part number Outer-Ø Wear limit Thickness For countersunk screw Max. static load capacity Da s K [N] RSDJ ± 0.05 M6 28,500 RSDJ ± 0.05 M8 66,000 RSDJ ± 0.05 M8 120,000 Please, use our different bar stock dimensions for your individual design page 541 delivery time from stock prices price list online 874 ifetime calculation, CAD files and much more support