Encoders Absolute Singleturn Encoder Types A58CS8

Transcription

1 Types A58CS8 Sturdy design with hardened bearings High rotation speed C/ F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion proof zones and enclosure available Salt spray tested version available interface A58CS8open Product Description The A58CS8open encoder is equipped with open interface. Extremely reliable with an exclusive engineering aimed to increase resistance Approvals (Types in bold are preferred ones) against vibrations and shaft loads IP65 die cast housing. Available up to, seawater proof and with different connection variants for every specific case. / Ordering Key Shaft type Turns Output type Mounting Shaft size Output circuit Connection Fieldbus profile Options Shaft Type A58 C S 8 A58 Turns Absolute Ø58mm/.8 C Mounting Compact shaft S Output Type Shaft Size Singleturn 8 Fieldbus Shaft 6x0mm/0.4x0.9 (ØxL) ) Shaft 0x0mm/0.9x0.78 (ØxL) ) Shaft /4"x7/8" (ØxL) 4 Shaft /8"x7/8" (ØxL) Output Circuit Connection (fig.,, ) Clamping flange Ø58mm/.8, IP65 (fig. 4, 5, 6) Synchro flange Ø58mm/.8, IP65 (fig.,, ) Clamping flange Ø58mm/.8, 4 (fig. 4, 5, 6) Synchro flange Ø58mm/.8, 5 (fig. 7, 8) Square flange 6.5mm/.5", IP65 7 (fig. 7, 8) Square flange 6.5mm/,5", open DS 0 V VDC (fig. 4, 7) With removable bus terminal cover, with radial screwed cable passage (fig. ) Removable bus terminal cover with xm connector A (fig. ) Fixed connection without radial cable (m PVC) E (fig. ) Fixed connection without xm radial connector F (fig. 5) Fixed connection without xm radial connector I (fig. 6) Fixed connection without xm radial connector J (fig. 8) Fixed connection without xm radial connector ) Preferred type with mounting type ) Preferred type with mounting type Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network

2 Types A58CS8 open Filed Bus Profile ) open Encoder-Profile DS 406 V. General Data Supply voltage 0...0VDC Consumption 4VDC, max. 60mA Reverse polarity protection Yes Maximum Speed IP65 shaft <70 C 9000min -, continuous 7000min - IP65 shaft <Tmax 7000min -, continuous 4000min - shaft <70 C 8000min -, continuous 6000min - shaft <Tmax 6000min -, continuous 000min - Starting torque IP65 shaft <0.0Nm shaft <0.05Nm Moment of inertia.0x0-6 kgm Radial load 80N Options No Option SET Axial load 40N Operating temperature C/ F 4) Shock resistance >500m/s, 6ms acc. to DIN-IEC Vibration resistance acc. to DIN-IEC >00m/s, Hz Protection acc. to EN shaft IP 65 (opt. ) Materials Shaft Stainless steel Flange Aluminium Die cast zinc Cable PVC Weight ~50g CE acc. to EN EN and EN General Interface characteristics Protocol open profile DS 406 V. with manufacturer specific add-ons Baud rate kbit/s (set by DIP switches / software configurable) Node address Termination switchable...7 (set by rotary switches / software configurable) Set by DIP switches Software configurable Interface characteristics open SET control button (zero or defined value, option) Singleturn resolution (max, scaleable) Code Interface (6bits), default scale value is set to 89 (bits) Binary High-Speed acc. to ISO 898, Basic- and Full- Specification.0 B Protected against accidental activation, can only be pushed in with the tip of a ball pen or similar. Diagnostic LED (yellow) LED ON Optical sensor path faulty (code error, LED error), low voltage and over-temperature ) parameters can also be factory-preset 4) Cable versions: C/ F Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network

3 Types A58CS8 open Top view of mating side Type Bus in 5 pin M male connector Bus out 5 pin M female connector Bus in and out pin M connector View Terminal assignment Bus terminal cover with terminal box (type of connection ) Direction OUT IN _low _high 0Volt +UB 0V +UB _low _high Abbreviation CG CL CH 0V +V 0V +V CL CH CG Cable connection (type of connection A) Direction 0V +UB IN _low _high Abbreviation 0V +V CL CH CG Cable colour WH BN YE GN BK M (type of connection I) or M (type of connection E) connector Direction 0V +UB IN _low _high Abbreviation 0V +V CL CH CG M PIN assignment 0 7 M PIN assignment 5 4 Bus terminal cover with x M connector (type of connection, F or J) Direction OUT IN _low _high 0Volt +UB 0V +UB _low _high Abbreviation CG CL CH 0V +V 0V +V CL CH CG M PIN assignment M PIN assignment Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network

4 Types A58CS8 open Dimensions (mm/inches) Flange type and (Drawing with cable version) 59.7 [.5] 0 Ø58 [.8] Ø6 f8 [.4] 48 [.89] 0 [0.9] 48.5 [.9] 49.5 [.95]. [0.5] x0 xm, 6 [0.4] deep xm4, 8 [0.] deep Fig. Flange type and (Drawing with x M connector) 58.5 [.] 0 Ø58 [.8] Ø6 f8 [.4] Ø48 [.89] 0 [0.9] Flange type and (Drawing with x M connector) 50 [.97] Ø58mm, Synchro flange Flange type and 4 (Drawing with cable version) 57 [.4] 50 [.97] Ø58 [.8] Ø50 [.97] 40 [.57] 60 [.6] Ø58 [.8] Ø6 f8 [.4] 40 [.57] 60 [.6] Ø48 [.89] 48.5 [.9] 49.5 [.95]. [0.5] x0 xm, 6 [0.4] deep xm4, 8 [0.] deep Fig. 0 Fig. 0 [0.9] 0 [.8] 65 [.56] 66 [.6] 4.5 [0.57] x0 xm, 6 [0.4] deep xm4, 8 [0.] deep Fig. 4 [0.] 4.55 [0.57] [0.] 0 [.8] 4 [0.6] 75 [.95] 76 [.0] Ø4 [.65] x0 xm4, 6 [0.4] deep Status LED SET button 4 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network

5 Types A58CS8 open Dimensions (mm/inches) 58mm, Synchro flange Flange type and 4 (Drawing with x M connector) 58.5 [.] Ø58 [.8] Ø50 [.97] 8 [.] Fig. 5 4 [0.6] [0.] [0.] 58.5 [.] 59.5 [.4]. [0.5] Ø4 [.65] x0 xm4, 6 [0.4] deep Ø58 mm, Synchro flange Flange type and 4 (Drawing with M connector) 58.5 [.] Ø58 [.8] Ø50 [.97] 4 [0.6] [0.] [0.] 58.5 [.] 59.5 [.4]. [0.5] Ø4 [.65] x0 Fig. 6 xm4, 6 [0.4] deep 6.5 mm, Square flange Flange type 5 and 7 (Drawing with cable version) 57 [.4] Ø.75 [.5] 40 [.57] 60 [.6] Fig [0.8] 7.5 [0.] 0 [.8] 67.5 [.66] 68.5 [.7] 4.5 [0.57] Ø5.5 [0.] 5.4 [.06] 6.5 [.5] 6.5mm, Square flange Flange type 5 and 7 (Drawing with x M connector) 58.5 [.] Ø.75 [.5] 8 [.] Fig. 8,7 ]8.0[. [0.5] 5,7 ].0[ ]0.[ 5 ]50.[,5 Ø5.5 [0.] 5.4 [.06] 6.5 [.5] Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please ask to our sales network