DART Medium. Adjustable Professional Projector Flood Light. Views

Transcription

1 DART Medium Adjustable Professional Projector Flood Light Concept: Small footprint adjustable LED projector. Housing: Die-cast aluminum body and joints for maximum heat dissapation. Materials: Die-cast aluminum housing powder coated in Ferrite Grey Color. Optics: NSP use high efficiency LED Emitter. SP, FL, MWFL, WFL, ASYM use high efficiency LED Chip on Board. Different optical systems depending on beam angles: Equipped with lenticular lenses for the NSP version, with a hybrid optic system for the SP and FL versions or convex faceted precision optics in high specularity anodised aluminium for the MWFL and WFL versions. ASYM version with high luminous efficiency pure aluminium reflector. Mounting: Adjustable up to ±45 on the horizontal pane and +90 /-45 on the vertical plane with aim locking set screw. Can be installed directly to mounting surface. Installation: Pre-cabled with 10 SJOOW 18-3 cable (second 18-2 direct burial cable for 0-10V dimmable version). Finish: Ferrite Grey Driver: Non-Dimmable or 0-10V Dimmable Wattage: 19W (NSP), 38W (SP, FL, MWF, WFL, or ASYM) Color Temperature: 3000ºK / 4000ºK Lumen Maintenance (L70): 50,000hrs Calculation for LED fixtures are based on measurements that comply with with IES LM-80. CRI: 84 Voltage: Universal Voltage V AC 50/60Hz IK Rating: IK10 IP Rating: IP66 Certifications: culus Wet Location Listed E Tested in accordance with LM Warranty: 5 year limited warranty IP66 Spot Optic Shown Lumens: 3000ºK 4000ºK Narrow Spot 10º = 1034 Lm 1101Lm Spot 13º = 2344Lm 2423Lm Flood 33º = 2158Lm 2230Lm Medium Wide Flood 48º = 3396Lm 3508Lm Wide Flood 62º = 3412Lm 3524Lm Asymmetric = 2882Lm 2977Lm PRODUCT CODE DRIVER OPTICS 1 WATTAGE COLOR TEMP DAM Dart Medium ND Non dimmable NS Narrow Spot 10º L1 19W K electronic V Dimming SP Spot 13º L2 38W K FL Flood 33º MF Medium Wide Flood 48º WF Wide Flood 62º AS Asymmetric 1 Narrow Spot 4º optic available upon request Views Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 1 of 5

2 OPTICAL ACCESSORIES: Maximum of two optical accessories per fixture 1E3022 Holder ring. CNC machined anodised and powder coated aluminium. Dimension 4.75in x 4.75in. Required for use of all filters. 1E3017 Chromatic filter Red. Glass made, with dichroic 1E3018 Chromatic filter Green. Glass made, with dichroic 1E3019 Chromatic filter Blue. Glass made, with dichroic 1E3020 Chromatic filter Yellow. Glass made, with dichroic 1E3021 Chromatic filter Magenta. Glass made, with dichroic treatment. Not suitable for Asymmetric optic. To be completed with dedicated holder ring. 1E3023 Blade light filter. PMMA holographic filter for a blade of light effect. Not suitable for Asymmetric optic. To be completed with dedicated holder ring. 1E3024 Asymmetric screen. Powder coated stainless steel. Not suitable with 1E E3022 Chromatic filters 1E3023 1E3025 Anti-glare grid. The central elements may be removed to obtain two different levels of glare control. Powder coated stainless steel. Not suitable with 1E E3024 1E3025 INSTALLATION ACCESSORIES: Maximum of one installation accessory per fixture 1E3026 Plate for fitting rotation. Powder coated stainless steel. 1E2825 Pole bracket for straight pole diameter 60mm (+/- 2mm). Anodised and powder coated diecast aluminium. 1E3026 1E2825 1E3027 1E3027 Pole multiple mounting system. Powder coated stainless steel. To be completed with 1E2825. Max 4 fixtures. 1E3028 Earthspike. Powder coated stainless steel. 1E3028 1E3029 1DU3026 1E3029 Laser pointing system. To be installed by friction on the projector s body. Powder coated stainless steel. Provided with laser. 1DU3026 Back Plate for Wall Mount Mount Installation. Powder coated stainless steel with Neoprene closed cells EPDM black foam. Included with 1E3015. Dimensions 5"W x 6"H X D. Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 2 of 5

3 OPTICAL SYSTEM The optical system is the heart of every lighting fixture and its role is to adapt to the lamp, control emission and create the light beam. Every optical system is different, calibrated by a specific lamp to maximise performance and designed to interpret a lighting task to the full. Following rapid developments in LED lamps and new technology associated with them it is now more important than ever to look for new solutions, geometry and materials. Given the importance and specificity of this function Targetti has an internal design department dedicated to constantly creating and evolving its optical systems. Extremely innovative proprietary systems that are very different to each other, often protected by patents are developed with careful attention to the precision of the light beams and the best efficiency possible. Reflector Optics: LENTICULAR Designed Light. In general they are used to create more precise beams where both performance and precision are essential requirements. Optics made with different lens geometries and materials depending on the type of LED lamp, whether a single or linear module, range from plano-convex optical glass from the best Italian tradition, to Fresnel lenses printed in noble plastic materials or innovative transparent cylindrical rods. HYBRID Performance and control. Based on the combined use of reflectors and lenses to combine the advantages of two light control methods. High efficiency and clean beams for well collimated beams that are completely free from fall-off halos, which is a normal effect of light that is not controlled in optics with a simple reflector. Inside a classic faceted reflector a frame is inserted which positions one or more optical glass lens in front of the lamp: while the reflector controls the periphery of the beam, the lenses manage its central part separately, the part that normally escapes out of control. Cancelling spurious light is combined with flux recovery and an increase in intensity inside the beam. FACETED Maximum Efficiency of soft light. Made from high vacuum metallised plastic protected with a Scratch Proof Formula or from polished anodised pure aluminium, their high reflectance always ensures high optical efficiency. Profiles designed with the best simulation software and the ellipsoidal convex facets overlaid on them are calibrated to generate various beam angles with an optimal light mix to create precise, soft, clean beams. ASYMMETRICAL Uniform light for vertical serfaces. These are optics which make it possible to obtain an uniform effect on vertical surfaces for the entire height while at the same time widen the beam for increased longitudinal uniformity and better installation distance. Typically they use reflectors with very complex and innovative geometry that can be made of metallised plastic or reflective aluminium or use extruded lenses as in the case of linear lamps. What makes them unique is their ability to direct beams right from the surface nearest the fixture, making the light attachment imperceptible. Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 3 of 5

4 Photometry Narrow Spot Polar Graph Cone of Light Fixture Power 19W (Ft) Max Med Fixture Output 1039Lm 1101Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK Beam Spread NSP 10º NSP 10º IMax 18153cd/klm 18153cd/klm Efficacy 54 Lm/W 58 Lm/W Spot Polar Graph Cone of Light Fixture Output 2344Lm 2423Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK Beam Spread Spot 13º Spot 13º IMax 8774cd/klm 8774cd/klm Efficacy 62 Lm/W 64 Lm/W Flood Polar Graph Cone of Light Fixture Output 2158Lm 2230Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK Beam Spread Flood 33º Flood 33º IMax 2119cd/klm 2119cd/klm Efficacy 57 Lm/W 59 Lm/W Medium Wide Flood Polar Graph Cone of Light Fixture Output 3396Lm 3508Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK Beam Spread MWF 48º MWF 48º IMax 1366cd/klm 1366cd/klm Efficacy 89 Lm/W 92Lm/W Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 4 of 5

5 Photometry (Continued) Wide Flood Polar Graph Cone of Light Fixture Output 3412Lm 3524Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK Beam Spread WF 62º WF 62º IMax 997cd/klm 997cd/klm Efficacy 90 Lm/W 93 Lm/W Asymm. Polar Graph Cone of Light Fixture Output 2882Lm 2978Lm ftcd ftcd Kelvin Temp 3000ºK 4000ºK Beam Spread Asymm Asymm IMax 503cd/klm 503cd/klm Efficacy 76 Lm/W 78 Lm/W Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 5 of 5