Genevac Technology is protected by patents and patent applications in the UK and worldwide. Genevac Ltd has a continuous development programme aimed
|
|
- Chester Wilson
- 5 years ago
- Views:
Transcription
1 Genevac Evaporators Options & Accessories Brochure Issue 4-9 January 2009 Additional Sample Holders are available, your Sales Representatives can advise on all additional items, including special order items. Genevac Technology is protected by patents and patent applications in the UK and worldwide. Genevac Ltd has a continuous development programme aimed at further improving their products and all specifications are, therefore, subject to change. Coolheat, VacRamp TM (Dri-Pure ), SampleGuard TM and associated logos are trade marks of Genevac Ltd, unauthorised use is prohibited.
2
3 Contents Introduction...3 New Range...3 Definitions...3 Geometry...3 Factors affecting evaporation performance...4 Heat transfer...4 Protective coatings...4 Sample holders...4 HCl or Thionyl Chloride...4 Maximum Capacity...4 Minimising Tube Breakage...5 Maintenance...5 Custom Design for Special Application...6 Rotors...6 HT Series & EZ-2 Evaporators...7 Fast-Stack Bucket Options...8 Flask Holder Options -Swing...9 Flask Holder Options -Swing Bottle/Beaker Holder Options -Swing Tube Holder Options Side Bridge Tube Holder Options Side Bridge Tube Holder Options - Swing Tube Holder Options - Swing Centrifuge Tube Holder Options Swing Vial Holder Options Side Bridge Vial Holder Options Side Bridge Vial Holder Options Side Bridge Vial Holder Options Swing Microplate Heat Transfer Plates...23 Microplate Heat Transfer Plates Mega Series Evaporators...25 Gilson Racks For Centrifugal Applications Designed and Manufactured by Genevac Ltd. in Agreement With Gilson Inc Mega Fast-Stack Racks Waters Fraction Collection Racks...29 Waters Fraction Collection Racks Miscellaneous...31 Miscellaneous SampleGuard Temperature Probe...32 SampleGuard Temperature Probe Locator...32 Miscellaneous Remote Lid Switch...33 Inert Gas Purge (Smart Box) Thermal Cushion Thermal Cushion Sample Holder Part Number Index Sample Holder Part Number Cross Reference Swing Part Number Cross Reference NotesNotes Amendment Control Form...38 Notes Amendment Control Form...39 Amendment Control Form...40
4
5 Introduction Genevac evaporators are designed to combine rapid and safe evaporation with high capacity and a wide variety of sample formats. In order to optimise the evaporation performance achieved it is important to select the correct sample holder for your particular application. Genevac samples holders are manufactured from solid aluminium to very precise specifications and are mass balanced to ensure smooth running of the evaporator. This guide will help you make the right choice. New Range This guide covers the new range of Genevac sample holders. These holders are easily identifiable as they are coloured bright blue. Any Genevac sample holder which is coloured blue can be used in both the HT series II systems and the EZ-2 series, this was not the case with the old range. Blue holders are not compatible with the old range of holders, to help you choose the correct new holder a cross referenced list can be found on page 33. Should you require an old design of holder, or a holder for a tube not listed, please contact your local Genevac representative or sales agent. Holders that are only to be used in the EZ-2, are identified in this brochure with the following; EZ-2 ONLY. Holders that are only to be used in the HT Series II, are identified in this brochure with the following; HT Series II ONLY. Some holders may not be used in EZ-2 mk1. The EZ-2 mk1 can be easily identified by the large circular window in the chamber lid, EZ-2 mk2 has a solid lid with a small tear drop window. These holders are identified in the brochure with the following: NOT EZ-2 mk1. Definitions Geometry 1 Tube holder indicates that the sample holder is designed to accommodate a tube with a hemispherical end. 2 A vial or bottle holder indicates that the sample holder is designed to accommodate a vial or bottle with a flat end. 3 Tubes with conical or tapered ends are individually identified Issue 4-9 January 2009 Page 3
6 Factors affecting evaporation performance Heat transfer One of the major factors determining speed of evaporation is the rate at which heat is transferred to your sample. More heat transferred means faster evaporation. These are the ways that the EZ-2, HT series II, DD-4, R-4 and Mega evaporators give you the best heat transfer: 1 High quality aluminium rotors and holders. Aluminium is recommended for its properties of high thermal conductivity and low weight. Genevac systems use aluminium sample holders, which have particularly efficient heat transfer properties. 2 High quality engineering. Genevac samples holders are manufactured to very precise specifications. This means your tubes fit very snugly into the tube holders. Any gaps would slow down the rate of heat transfer. For this reason it is important you send us a sample of your tube when placing orders for sample holders. Protective coatings Sample holders Standard aluminium sample holders are Hard Anodised (naturally unsealed) for protection against all normal organic solvents, including strong acids such as TFA. HCl or Thionyl Chloride When evaporating HCl or Thionyl Chloride it will be necessary to purchase both a HCl/Thionyl Chloride resistant system (comprising of: evaporator, condenser and pump) and HCl/Thionyl Chloride resistant sample holders. In this case the aluminium rotor and sample holders are coated to ensure resistance to attack from HCl/Thionyl Chloride. Maximum Capacity Genevac uses the latest in computer aided design technology to ensure internal capacity is maximised whilst the instrument footprint is kept to an absolute minimum. This means high throughput evaporation is possible from an instrument taking up a small amount of bench top space. Page Issue 4-9 January 2009
7 Minimising Tube Breakage Not only does precision design of Genevac sample holders contribute to excellent heat transfer and superior evaporation performance, it also ensures that tubes have maximum protection from breakage during evaporation. For additional protection against glassware breakage, some flask holders and some tube holders are provided with thermal cushions. Thermal cushions are made from a filled polymer with excellent heat transfer and cushioning properties. Only borosilicate tubes with wall thickness more than 1.2mm should be used in Genevac evaporators. Old, damaged or scratched glassware should not be used. Laboratories that reuse tubes or vials should regularly inspect each tube or vial for damage, and discard scratching or cracked items. For more information and advice on this subject, please refer to our Safe Loading document available to download from our web site. Maintenance Regular inspection and maintenance of sample holders should be performed at least monthly. The following inspection routine is mandatory following tube breakage or solvent spillage. Never use wet sample holders in a Genevac system. Inspection: Visually inspect and sample holders each month. Debris - should be cleaned off, especially any in the sample holder wells as this may lead to glassware breakage. The number one cause of repeat glassware breakage is glass fragments from a previously broken tube. Sometimes the sample sticks the glass to the inside of a sample holder well and it is therefore difficult to remove. Residual solvent / sample - should be cleaned off. Superficial surface damage (e.g. scratches) will not affect the performance of a sample holder. If a sample holder is structurally damaged, (any part of the sample holder bent of deformed) - do not use - contact Genevac for evaluation. Cleaning: Loose dirt / debris can be removed using a brush and / or airline. Adhered dirt / debris or sample / solvent residue should be cleaned off using methanol or acetone, soaking the sample holders if required. The sample holders should then be washed in clean water and fully dried before use Issue 4-9 January 2009 Page 5
8 Custom Design for Special Application As the market leader in centrifugal evaporation, we have already designed holders for the majority of applications. Please examine the list on the following pages, for the correct part number. However, should you have a special application or unusual tube size then we can design a special holder for you. Please note there is a nominal charge to cover design time for this service. Our experienced sales team (or international distributors) will be pleased to advise you of the options available. Rotors For information on our rotors, please refer to the Quick Guide to HT Series Rotors available to download from our web site. Page Issue 4-9 January 2009
9 HT Series & EZ-2 Evaporators Issue 4-9 January 2009 Page 7
10 Fast-Stack Bucket Options Holder Description Shallow Well Specification (Diameter x Length) Holds 4 microtitre plates. Max area for plate: x 86.5 x 19.0 (mm) Mass = 523g Part number Deep Well HCl use Holds 2 Micro-Tube Cluster Racks. Max area for plate: x 86.5 x 48.5 (mm) Mass = 580g NOT EZ-2 mk1 Side Bridge HCl use Holds Radleys GreenHouse Block Max foot-print: x 86.5 (mm) Mass = 380g Page Issue 4-9 January 2009
11 Flask Holder Options -Swing Holder Description Round Bottom Flask Holder Specification (Diameter x Length) Holds Qty 6 x 25ml (19/26 24/29 Socket Size) (See Note Below) Part number British Design Registration No Round Bottom Flask Holder Holds Qty 4 x 50ml (29/32 Socket Size) (See Note Below) British Design Registration No Round Bottom Flask Holder Holds Qty 4 x 50ml (19/26-24/29 Socket Size) (See Note Below) British Design Registration No Round Bottom Flask Holder Holds Qty 3 x 100ml (19/26-24/29 Socket Size) (Including Radleys Carousel) (See Note Below) EZ-2 ONLY Round Bottom Flask Holder Holds Qty 3 x 100ml (29/32 Socket Size) (See Note Below) EZ-2 ONLY British Design Registration No Note: Must be used with Genevac Thermal Cushion for prolonging glassware lifetimes and dramatically cutting drying times Issue 4-9 January 2009 Page 9
12 Flask Holder Options -Swing Holder Description Specification (Diameter x Length) Part number Round Bottom Flask Holder Holds Qty 1 x 250ml (19/26-24/29 29/32 Socket Size) (Including Radleys Carousel) (See Note Below) British Design Registration No Round Bottom Flask Holder Holds Qty 1 x 500ml (19/26-24/29 29/32 Socket Size) (See Note Below) EZ-2 ONLY British Design Registration No Round Bottom Flask Holder Holds Qty 1 x 500ml Max Flask height 156mm (See Note Below) HT Series II ONLY Note: Must be used with Genevac Thermal Cushion for prolonging glassware lifetimes and dramatically cutting drying times. Page Issue 4-9 January 2009
13 Bottle/Beaker Holder Options -Swing Holder Description Bottle Holder Specification (Diameter x Length) Holds Qty 2 x 100ml Schott bottles Part number Bottle/Beaker Holder Holds Qty 1 x 250ml Schott bottle or 1 x 400ml beaker (Fisher Brand ref FB33124) 70mm x 130mm Bottle/Beaker Holder Holds Qty 1 x 500ml Glass bottle 82mm x 152mm (See Note Below) NOT EZ-2 mk1 Note: Must be used with Genevac Thermal Cushion for prolonging glassware lifetimes and dramatically cutting drying times Issue 4-9 January 2009 Page 11
14 Tube Holder Options Side Bridge Holder Description 0.5ml Eppendorf holder 1.5ml Eppendorf holder Specification (Diameter x Length) Part number Holds Qty Holds Qty Tube Holder Holds Qty 40 10mm x 75mm Tube Holder Holds Qty 40 12mm x 75mm Tube Holder Holds Qty 40 12mm x 75 to 110mm Tube Holder Holds Qty 40 13mm x 75 to 110mm Tube Holder Holds Qty 24 16mm x 75 to 110mm Page Issue 4-9 January 2009
15 Tube Holder Holds Qty 24 17mm x 75 to 110mm Straight Microwave Issue 4-9 January 2009 Page 13
16 Tube Holder Options Side Bridge Holder Description Specification (Diameter x Length) Part number Tube Holder Holds Qty 24 17mm x 85mm Tapered Microwave Tube Holder Holds Qty 24 18mm x 75mm to 110mm Tube Holder Holds Qty 12 25mm x 75mm to 110mm Page Issue 4-9 January 2009
17 Tube Holder Options - Swing Holder Description Specification (Diameter x Length) Part number Tube Holder Holds Qty mm x 130mm Tube Holder Holds Qty 12 17mm x 110mm to 152mm Tube Holder Holds Qty 12 18mm x 110mm to 152mm Tube Holder Holds Qty 10 20mm x 110mm to 152mm Tube Holder Holds Qty 6 24mm x 110mm to 152mm (Including Radleys Carousel and STEM Reaction Stations) Issue 4-9 January 2009 Page 15
18 Tube Holder Options - Swing Holder Description Specification (Diameter x Length) Part number Tube Holder Holds Qty 6 25mm x 110mm to 152mm Tube Holder Holds Qty 3 34mm x 135mm Page Issue 4-9 January 2009
19 Centrifuge Tube Holder Options Swing Holder Description 15ml Tube Holder Specification (Diameter x Length) Holds Qty mm x 120mm Part number ml Tube Holder Holds Qty mm x 115mm 70 Degree End Issue 4-9 January 2009 Page 17
20 Vial Holder Options Side Bridge Holder Description Specification (Diameter x Length) Part number Vial Holder Holds Qty 48 10mm x 45mm Vial Holder Holds Qty 48 12mm x 35mm Vial Holder Holds Qty 40 13mm x 50mm (4ml HPLC CRIMP TOP VIAL) Vial Holder Holds Qty mm x 50mm Vial Holder Holds Qty 24 15mm x 50mm Vial Holder Holds Qty mm x 50mm (1 DRAM & 4ml HPLC SCREW TOP VIAL) Vial Holder Holds Qty mm x 75mm Page Issue 4-9 January 2009
21 Vial Holder Options Side Bridge Holder Description Specification (Diameter x Length) Part number Vial Holder Holds Qty 24 17mm x 75mm (2 DRAM VIAL) Vial Holder Holds Qty mm x 50mm Vial Holder Holds Qty 18 20mm x 75mm Vial Holder Holds Qty mm x 75mm Vial Holder Holds Qty 12 23mm x 75mm Vial Holder Holds Qty 12 24mm x 75mm Vial Holder Holds Qty mm x 75mm (20ml SCINTILLATION VIAL) Issue 4-9 January 2009 Page 19
22 Vial Holder Options Side Bridge Holder Description Specification (Diameter x Length) Part number Vial Holder Holds Qty mm x 75 to 110mm (40ml SCINTILLATION VIAL) Page Issue 4-9 January 2009
23 Vial Holder Options Swing Holder Description Specification (Diameter x Length) Part number Vial Holder Holds Qty mm x 95 & 142mm Issue 4-9 January 2009 Page 21
24 Page Issue 4-9 January 2009
25 Microplate Heat Transfer Plates Not only can Genevac offer precision manufactured sample holders providing excellent evaporation results for laboratory glassware, there is a range of sample holders that improve evaporation when using deep well microtitre plates. These holders, Heat Transfer Plates, are designed to support the wells of the plate, to fit precisely to the base of the wells, and where possible, to fit to the sides of each well. Heat transfer plates confer two main benefits: Excellent heat transfer rates, and reduced evaporation times from micro plates by up to 50% - for more details view the study available on the Genevac website using the following link: Support for micro plates when used in open swings, preventing direct heating by lamps that may be harmful, and preventing plates becoming deformed by heat and G-force. Heat transfer plates are available for use in open swings, side bridge swings, and most Fast Stack holders. Heat transfer plates MUST be used when using microtube cluster racks, e.g. Micronics or ABgene racks, in Genevac open swings. If you would like a micro plate evaluated to see if a suitable Heat Transfer Plate exists, or would like further information, please contact your Genevac representative Issue 4-9 January 2009 Page 23
26 Microplate Heat Transfer Plates Plate Description For use in Side Bridge Swing Specification Provides an even sample drying condition. Max foot-print: x 86.5 (mm) Mass = 200g Part number Ex-Stock Patent applied for in the UK and worldwide Patent applied for in the UK and worldwide For use in Side Bridge Swing For use in Side Bridge Swing Compatible with: Falcon, Micronic Traxis and Micronic Multi-Tube Cluster Racks Round end tubes Compatible with: Beckman 1ml x 96 O Beckman 2ml x 96 Costar 1ml x 96 O Costar 2ml x 96 Whatman 2ml x Patent applied for in the UK and worldwide For use in Side Bridge Swing Compatible with: Axygen 2ml x 96 O Greiner 1ml x 96 O Nunc 2ml x 96 O Nunc 1ml x 96 O Whatman 1ml x 96 O Patent applied for in the UK and worldwide For use in Deep Well Swing Compatible with: MultiChem 10ml x 24 O Polyfiltronics 10ml x 24 O UniPlates 10ml x 24 O Whatman 10ml x 24 O For use in Deep Well Swing Compatible with: ABgene Multi-Tube Cluster Racks Patent applied for in the UK and worldwide Round end tubes The items listed above are only a small example from the range of Heat Transfer Plates that Genevac can provide; please contact your Sales representative for details. Page Issue 4-9 January 2009
27 Mega Series Evaporators Issue 4-9 January 2009 Page 25
28 Gilson Racks For Centrifugal Applications Designed and Manufactured by Genevac Ltd. in Agreement With Gilson Inc. Holder Description & Gilson Code Specification (Diameter x Length) Part number Tube holder (Code 207) Holds Qty x 100 mm Tube holder (Code 223) Holds Qty x 100 mm Scintillation vials holder (Code 204) Holds Qty x 57 mm Tube holder (Code 204) Holds Qty x 100 mm Scintillation vials holder (Code 204) Holds Qty x 100 mm Centrifuge tube holder (Code 222) Holds Qty 27 50ml Page Issue 4-9 January 2009
29 Mega Fast-Stack Racks Applicability Specification (Quantity and Type) Part number Mega 980 Max Holds Qty 28 Shallow Well Micro Plates Mega 980 Max Holds Qty 16 Deep Well Micro Plates Mega 980 Max Holds Qty 10 Marsh Micro Plates Mega 1200 Max Holds Qty 50 Shallow Well Micro Plates Mega 1200 Max Holds Qty 30 Deep Well Micro Plates Mega 1200 Max Holds Qty 20 Marsh Micro Plates Issue 4-9 January 2009 Page 27
30 Page Issue 4-9 January 2009
31 Waters Fraction Collection Racks Genevac offer a range of innovative options that help interface your fraction collection system directly to the Genevac HT series evaporator. Currently Gilson 215 and Waters 2767 systems are supported. To interface with the fraction collections system, Genevac provide a simple sample holder carrier which fits directly on to the fraction collection bed. Genevac sample holders fit into the carrier to make up a complete fraction collection rack. Once fractions have been collected, the sample holders can be placed directly into the Genevac evaporator with no need to label, mark or manipulate each tube. Sample holders can be marked to indicate location within the fraction collection rack. There are a range of options, some use standard sample holders, some use specially designed holders which keep the spacing between tubes uniform, and reduce fraction collector reprogramming. Waters 2767 users will require the adaptor plate when using 16mm diameter tubes. A separate range of Genevac designed holders exists for use with Genevac Mega systems (see page 22). A technical article discussing these issues in greater detail is available upon request from your Genevac representative. If you would like further information, please contact your Genevac representative Issue 4-9 January 2009 Page 29
32 Waters Fraction Collection Racks Description Specification Part number Adapter Plate For rack Converts Waters 2767 Sample Manager Rack Bed from 4 to 3 Racks Rack for use with Waters Fraction Collection Holds Qty or Tube Holders Tube Holder Order Qty 2) Holds Qty 12 16mm x 110mm to 152mm Tube Holder Order Qty 2) Holds Qty 6 25mm x 110mm to 152mm Adapter plate For SideBridge Holders Converts Waters 2767 Sample Manager Rack Bed To enable 14 MAX SideBridge Holders To be loaded SideBridge Vial Holder Order Qty 2) Holds Qty 12 20ml Scintillation Vials The items listed above are only a small example from the range that Genevac can provide; please contact your Sales representative for details. Page Issue 4-9 January 2009
33 Miscellaneous Issue 4-9 January 2009 Page 31
34 Miscellaneous Description Specification Part number NOT ILLUSTRATED SampleGuard Temperature Probe MkIV Rotor Length 90mm Standard Length 90mm HCl NOT ILLUSTRATED SampleGuard Temperature Probe CH1 & CH2 Short FastStack Swing Solid Holder Length 160mm Standard Length 160mm HCl NOT ILLUSTRATED SampleGuard Temperature Probe CH2 Medium Length 220mm Standard Length 220mm HCl NOT ILLUSTRATED SampleGuard Temperature Probe CH2 Long Length 280mm Standard Length 280mm HCl SampleGuard Temperature Probe Locator For use with Micro Plates On Request Page Issue 4-9 January 2009
35 Miscellaneous Description Specification Part number NOT ILLUSTRATED Remote Lid Switch For use with HT-4 when fitted in fume hood Issue 4-9 January 2009 Page 33
36 Inert Gas Purge (Smart Box) Description Specification Part number Inert Gas Purge Box For use with HT-4 Series II Evaporators Inert Gas Purge Box For use with HT-8 & 12 Series II Evaporators Inert Gas Purge Box For use with EZ-2 100Volt Evaporators Inert Gas Purge Box For use with EZ Volt Evaporators Inert Gas Purge Box For use with EZ Volt Evaporators Page Issue 4-9 January 2009
37 Thermal Cushion Description Specification Part number Thermal Cushion Use with 25ml Flask (Pack of 96) Ex-Stock Thermal Cushion Use with 50ml Flask (Pack of 96) Ex-Stock Thermal Cushion Use with 100ml Flask (Pack of 48) Ex-Stock Thermal Cushion Use with 170/250ml Flask (Pack of 48) Ex-Stock Thermal Cushion Use with 250ml Flask (Pack of 12) Ex-Stock Thermal Cushion Use with 500ml Flask (Pack of 12) Ex-Stock Issue 4-9 January 2009 Page 35
38 Thermal Cushion Description Specification Part number Applicator For use with Thermal Cushion Ex-Stock Spatula For use with Thermal Cushion Ex-Stock Page Issue 4-9 January 2009
39 Sample Holder Part Number Index Sample Holder Part Number Cross Reference Old New Old New Old New Swing Part Number Cross Reference Old New Issue 4-9 January 2009 Page 37
40 Notes Page Issue 4-9 January 2009
41 Notes Options and Accessory Brochure Issue 4-9 January 2009 Page 39
42 Amendment Control Form Issue Reason for Change Date Issued 1 Introduction of 500ml Flask Holder for HT Series II 30-Nov-05 2 Corrected image for Jul-06 3 Introduction of Schott Bottle & Beaker holders 13-Nov-06 4 Waters Fraction Collection Rack Options updated 20-Aug-07 5 Addition of tube holder Jan-08 6 Addition of Maintenance of Sample Holder 17-Apr Update U.S. address 24-Oct Amend layout 16-Jan Correct title Centrifuge Tube Holder Options Swing 27-Jan-09 Page Issue 4-9 January 2009
43 Issue 4-9 January 2009 Page 41
44 Genevac Limited The Sovereign Centre Farthing Road Ipswich IP1 5AP United Kingdom Sales and Service Hotlines Service Hotline: +44 (0) Sales Hotline: +44 (0) Fax: +44 (0) Web site: Genevac Inc SP Industries 815 State Route208 Gardiner NY, United States of America Sales and Service Hotline (1) Fax (1) Genevac Technology is protected by patents and patent applications in the UK and worldwide. Genevac Ltd has a continuous development programme aimed at further improving their products and all specifications are, therefore, subject to change. Coolheat, VacRamp TM (Dri-Pure ), SampleGuard TM and associated logos are trade marks of Genevac Ltd, unauthorised use is prohibited.
Mya 4 Reaction Station
Mya 4 Reaction Station One reaction station with limitless possibilities 4 independent zones Magnetic and overhead stirring -30 C to +180 C 2 ml to 400 ml Software control Process Package Let Daisy introduce
More informationFeaturing fast rotor exchanges with AUTO-LOCK
Thermo Scientific Sorvall T1 Centrifuge Series Versatility, convenience and value for routine applications Featuring fast rotor exchanges with AUTO-LOCK Versatility, convenience and value for routine applications
More informationThermo Scientific IEC CL31 Multispeed Centrifuge Series Maximum Versatility, Exceptional Capacity and Performance
Thermo Scientific IEC CL31 Multispeed Centrifuge Series Maximum Versatility, Exceptional Capacity and Performance Featuring Fast Rotor Exchanges with AUTO-LOCK Thermo Scientific IEC CL31 Multispeed Centrifuge
More informationSTEM RS9000 Reaction Station
STEM RS Reaction Stations Equipment for parallel synthesis The STEM RS series Reaction Stations enable parallel synthesis to be carried out by offering the same controlled temperature and stirring rates
More informationCentrifuges 5702/ 5702 R/ 5702 RH
196 Sample Handling 5702/ 5702 R/ 5702 RH The 5702 family of low speed, general purpose centrifuges was especially designed to meet the requirement of low- to midthroughput clinical research and cell culture
More informationLow-speed, high-capacity centrifuge. Thermo Scientific Sorvall HT6 Centrifuge
Low-speed, high-capacity centrifuge Thermo Scientific Sorvall HT6 Centrifuge Thermo Scientific Sorvall HT6 Low-speed, high-capacity centrifuge The Sorvall HT6 delivers outstanding performance in a refrigerated
More information7. Heating and cooling technology Heating/Hotplates-Block thermostats
Heating/Hotplates-Block thermostats GENERAL CATALOGUE 00/ Flask heaters, series heating, KI series Versatile, - or 6-bank heaters with bowl-shaped tubular heating elements and built-in Gerhardt stainless
More informationMini Vortex Mixers Heavy-Duty Vortex Mixers Microplate Vortex Mixers Multi-Tube Vortex Mixers. Vortex Mixers
Mini Vortex Mixers Heavy-Duty Vortex Mixers Microplate Vortex Mixers Multi-Tube Vortex Mixers Vortex Mixers Mini Vortex Mixers Four Mini Vortex Mixer models for gentle to high-speed mixing are available.
More informationROTIXA 50 S. Floorstanding Centrifuges, non-refrigerated and refrigerated
ROTIXA 50 S Floorstanding Centrifuges, non-refrigerated and refrigerated ROTIXA 50 S/50 RS PERFORMANCE 4,900 min -1 in a swing-out rotor, Among experts ROTIXA has become a household word for high sample
More informationTalboys Standard Analog Dry Block Heaters
Talboys Standard Analog Dry Block Heaters -Holds interchangeable modular blocks. -Analog controls. -High wattage, constant-temperature Dry Block Heaters are economical, versatile and compact. -These multi-purpose
More informationDry Block Heaters. Quality Selection Value
Dry Block Heaters Quality Selection Value Advanced Dry Block Heaters Exceptional temperature uniformity and stability Optional external temperature probe Heats from ambient to 120 C Holds interchangeable
More informationUNIVERSAL 32. Benchtop Centrifuges, non-refrigerated and refrigerated
UNIVERSAL 32 Benchtop Centrifuges, non-refrigerated and refrigerated UNIVERSAL 32 The sedimentation of cells, bacteria, yeasts, DNA/RNA and protein precipitates is workaday routine in basic research and
More informationDri-Block Heaters DB-2A DB-2D & DB-2DH DB-2D
Dri-Block Heaters Techne's Dri-block heaters provide a safe, dry, constant temperature source in the laboratory. The units are particularly suitable for microbiology and clinical laboratories for incubation,
More informationThermo Scientific IEC CL30 Centrifuge Series Convenience, Reliability and Value
Thermo Scientific IEC CL30 Centrifuge Series Convenience, Reliability and Value Featuring Fast Rotor Exchanges with AUTO-LOCK Thermo Scientific IEC CL30 Centrifuge Series Convenience, Reliability and Value
More informationBruker BioSpin FLOW NMR. Racks & Accessories Catalog. Version. NMR Spectroscopy. think forward
Bruker BioSpin FLOW NMR Racks & Accessories Catalog Version 004 think forward NMR Spectroscopy Copyright by Bruker BioSpin GmbH All rights reserved. No part of this publication may be reproduced, stored
More informationHiCen XL Extra-Large High-Speed Floor Centrifuge
HiCen XL Extra-Large High-Speed Floor Centrifuge HiCen XL For Extra-Large Volumes Catalog No. Description Voltage Phases Hz 21 10 200 HiCen XL, Standard for Europe refrigerated 400/440 V 3 50/60 Hz 21
More informationLarge Volume Refrigerated Centrifuge Floor Model up to 4 Liter
Large Volume Refrigerated Centrifuge Floor Model up to 4 Liter for large Volumes, high Throughput and High-Speed-Centrifugation Catalog No. Description Voltage Phases Hz 21 11 650 HiCen GR, Standard for
More informationHiCen T / HiCen TR. High-Speed Tabletop Centrifuges
HiCen T / HiCen TR High-Speed Tabletop Centrifuges HiCen T + TR High-Speed for your Lab Table Catalog No. Description Voltage Phases Hz 21 10 050 HiCen T, Standard for Europe 230 V 1 50/60 Hz 21 10 052
More informationThermo Scientific Sorvall benchtop centrifuges. Fits in. To your space, with compact designs
Fits in. Stands out. Take advantage of these special offers Packages designed around your applications. Order your centrifuge, rotor and accessories with 1 part number. Cell culture Microplate and molecular
More informationFits in. Stands out. Thermo Scientific Heraeus Megafuge 8 Centrifuge
Fits in. Stands out. Thermo Scientific Heraeus Megafuge 8 Centrifuge Introducing the NEW! Thermo Scientific Heraeus Megafuge 8 small benchtop centrifuge Fits in. 4 to your space, with its compact footprint.
More informationMulti-use, low-speed, high-capacity centrifuge. Thermo Scientific KR4i Centrifuge
Multi-use, low-speed, high-capacity centrifuge Thermo Scientific KR4i Centrifuge Thermo Scientific KR4i Multi-use, low-speed, high-capacity centrifuge The Thermo Scientific KR4i centrifuge delivers outstanding
More informationHigh Performance Refrigerated Centrifuge Large number of tubes and capacity up to ml
High Performance Refrigerated Centrifuge Large number of tubes and capacity up to 6.000 ml for Extra-Large Volumes Catalog No. Description Voltage Phases Hz 21 10 200 HiCen XL, Standard for Europe refrigerated
More informationHigh-Speed Centrifuges with or without refrigeration small footprint and they fit beneath the work bench
High-Speed Centrifuges with or without refrigeration small footprint and they fit beneath the work bench Mobile and Compact Catalog No. Description Voltage Phases Hz 21 10 150 HiCen F, Standard for Europe
More informationcapacity 75 µl Capillaries 1,5 x 75 mm Rotor and Lid as evaluation disc incl.
CENTRIFUGES BOECO HEMATOCRIT CENTRIFUGE H-240 High-speed bench-top centrifuge for microhematocrit determinations with brushless frequency drive. At 16.060 g sedimentation is completed in just a little
More informationSuperspeed Centrifuge
Superspeed Centrifuge Floor model with refrigeration and 4 Liter capacity. for Large Volumes Catalog No. Description Voltage Phases Hz 21 11 100 HiCen SR, Standard for Europe refrigerated 400/440 V 3 50/60
More informationUniversal High-Speed Benchtop Centrifuge Large Volume up to 4 x 1,000 ml
Universal High-Speed Benchtop Centrifuge Large Volume up to 4 x 1,000 ml For large Volumes, high Throughput and High-Speed-Centrifugation Catalog No. Description Voltage Phases Hz 21 11 150 HiCen GT, Standard
More informationROT I NA 35. Benchtop Centrifuges, non - refrigerated and refrigerated
Rotina35_E_S1_01_04 14.01.2004 13:58 Uhr Seite 1 #$! %# " & "" '$ () %&! ROT I NA 35 Benchtop Centrifuges, non - refrigerated and refrigerated ROTINA 35 The high-performance benchtop centrifuges ROTINA
More informationReaction Blocks for Circular-top Hot Plate/Stirrers. sizes Easy to use
Reaction Blocks for Circular-top Hot Plate/Stirrers New sizes Easy to use Complete Radley s systems and ACE brand Economical and efficient ACE DynaBloc anodized aluminum blocks are ideal for heating and
More informationImmunity: EN capacity 75 µl Capillaries. 1,5 x 75 mm. Rotor and Lid as evaluation disc incl. Cat.-No. capillaries per rotor
CENTRIFUGES BOECO HEMATOCRIT CENTRIFUGE H-240 High-speed bench-top centrifuge for microhematocrit determinations with brushless frequency drive. At 16.060 g sedimentation is completed in just a little
More informationDo More With OHAUS. Lab Equipment
Do More With OHAUS Lab Equipment Contents Centrifuges Frontier Series... 1 Rotors & Accessories... 6 Open Air Shakers Light Duty Orbital Shakers...25 Extreme Environment Shakers...26 Heavy Duty Orbital
More informationDry Bath Incubator. MK-10/MK-20 Dry Bath Incubator. Features: Specification: Block for MK-10 / MK-20
MK-10/MK-20 The MK-10/MK-20 is a microprocessor-controlled product using advanced thermoelectric technique. With this technique, more stable and accurated temperature control is achieved. Replacement is
More informationProduct Overview. your solutions
Product Overview your solutions 2 CyBio - Product Overview your solutions Pipettors CyBi -Well Provides precise pipetting in 96-, 384- and 1536-well formats. Available with a variety of stackers and accessories
More informationLinkam Scientific Instruments
THMS600PS Pressure System By pressurizing the sample chamber up to 14bar the THMS600-PS pressure stage can be used to investigate the effects of pressure on the sample during heating and cooling experiments.
More informationMulti-Purpose, High-Speed Centrifuges. 15,000 / 25,910 xg 15,000 / 24,249 xg
Multi-Purpose, High-Speed Centrifuges 15,000 / 25,910 xg 15,000 / 24,249 xg 30 Centrifuges Concentrators Laboratory Mixers & Shakers 12,000 / 16,582 xg 12,000 / 15,520 xg 12,000 / 16,582 xg * All tubes
More informationMini Vortex Mixers.
Mini Vortex Mixers Four Mini Vortex Mixer models for gentle to high-speed mixing are available. Analog model offers variable speed control, and digital model allows input of the exact speed and time to
More informationVariable-Speed Vortex Mixer
Variable-Speed Vortex Mixer User Guide Version 1.1 IEC connector Retort rod fitting Rubber cup Speed control dial Power on/off button Mode button Figure 1: Vortex Mixer Figure 2: Front panel 2 Variable-Speed
More informationMRS installation and user's guide
MRS installation and user's guide Documentation part number H-1000-5088-06-B Issued 11 2017 1 General information 2001 2017 Renishaw plc. All rights reserved. This document may not be copied or reproduced
More informationThermo Scientific GENESYS UV-Vis Spectrophotometer Accessories. Make the most of every sample
Thermo Scientific GENESYS UV-Vis Spectrophotometer Accessories Make the most of every sample Thermo Scientific GENESYS Accessories Designed to enable you to work smarter, not harder We offer a wide variety
More informationUNIVERSAL 320 / 320 R
/ 320 R max. 5 ml max. 100 ml max. 50 ml max. 85 ml 200 ml Our multitalented centrifuges save space and costs There are many good reasons for calling these centrifuges UNIVERSAL. Their excellent performance
More informationACCESSORIES AND CONSUMABLES CATALOGUE FOR CONTACT LENS LABORATORIES
PRECISION OPTICAL MATERIALS ACCESSORIES AND CONSUMABLES CATALOGUE FOR CONTACT LENS LABORATORIES Vista Optics Limited Cheshire Science Centre Gorsey Lane Widnes Cheshire WA8 0RP United Kingdom Tel. +44
More informationFits in. Stands out. Thermo Scientific SL 8 Centrifuge Series
Fits in. Stands out. Thermo Scientific SL 8 Centrifuge Series Introducing the NEW! Thermo Scientific SL 8 and 8R small benchtop centrifuges Fits in. 4 to your space, with its compact footprint. 4 to your
More informationNEW! Thermo Scientific Sorvall ST 40 Centrifuge Series. capacity, ergonomics and value for routine processing needs
NEW! Thermo Scientific Sorvall ST 40 Centrifuge Series capacity, ergonomics and >>Unmatched value for routine processing needs Global Leader in Quality and Reliability For more than 100 years, Thermo Scientific
More informationLabware List QIAsymphony RNA Kit
Labware List QIAsymphony Kit Sample and eluate tubes/racks that can be used with the QIAsymphony Kit and the QIAsymphony SP (software version 4.0; labware package SOW-516-6) Revision management This document
More informationIKA Mixing Orbital shakers
Orbital shakers 40 lab dancer Economic, compact test tube shaker with touch function. Its compact and clever design makes it an indispensable tool for every laboratory The lab dancer can be used with all
More informationSample Storage STORAGE BOXES & RACKS
Sample Storage STORAGE BOXES & RACKS Polypropylene Storage Boxes... 80 81, 85 Cardboard Storage Boxes... 82 Cryogenic Storage Boxes... 82 83 Centrifuge Tube Storage... 84... 85 Multi-Tube Racks... 86 88
More informationIncubating & Incubating Cooling Shakers. Incubating Cooling Thermal Shakers Incubating Light Duty Orbital Shakers Incubating Rocking & Waving Shakers
Incubating & Incubating Cooling Shakers Incubating Cooling Thermal Shakers Incubating Light Duty Orbital Shakers Incubating Rocking & Waving Shakers Incubating & Incubating Cooling Selection Guide Product
More informationNEW! Thermo Scientific SL 40 Centrifuge Series
NEW! Thermo Scientific SL 40 Centrifuge Series Thermo Scientific SL 40 Global Leader in Quality and Reliability For more than 100 years, Thermo Scientific centrifuges have delivered outstanding performance
More informationELECTRONIC CATALOGUE CUSTOMER S AMENDMENTS ISSUE 04 JULY 2010 Page 1 of 4 pages
A J COPE & SON LTD The Oval London E2 9DU Telephone: +44 (0) 20 7729 2405 Facsimile: +44 (0) 20 7729 2657 ELECTRONIC CATALOGUE CUSTOMER S AMENDMENTS ISSUE 04 JULY 2010 Page 1 of 4 pages Internet: www.ajcope.co.uk
More informationSIX PACK MK9 MAXX D MK11 TORO MK10 RACE MK13 STRADA SB STRADA RS STRADA SL
USER GUIDE SIX PACK MK9 MAXX D MK11 TORO MK10 RACE MK13 STRADA SB STRADA RS STRADA SL CHARGING Fully Charge your light before first use. Locate the charging port by pulling away the silicone Storm Cap.
More informationReaction Blocks for Circular-top Hot Plate/Stirrers
P 2010 C O N TA R I C I I N S G N Reaction Blocks for Circular-top Hot Plate/Stirrers New sizes Easy to use Complete systems Radley s and ACE brand Economical and efficient www.aceglass.com sales@aceglass.com
More informationThermo Scientific SL 8 Compact Centrifuge Series. Fits in. Stands out.
Thermo Scientific SL 8 Compact Centrifuge Series Fits in. Stands out. Thermo Scientific SL 8 compact centrifuge series Fits in. c to your space, with its compact footprint. Ergonomic designs enhance placement
More informationWash Baskets & Machine Accessories. For use in Miele Standard Chamber Washers
Wash Baskets & Machine Accessories For use in Miele Standard Chamber Washers 2 Miele Baskets & Accessories: Advancing the Science of Clean Engineered Simplicity Miele manufactures washers capable of expertly
More informationUNIVERSAL 320/320 R Benchtop Centrifuges classic/cooled
UNIVERSAL 320/320 R Benchtop Centrifuges classic/cooled UNIVERSAL 320/320 R Performance There are good reasons why we have called these centrifuges UNIVERSAL. Their excellent performance and comprehensive
More informationMTP SmallAnchor Targets BC
Instructions for Use MTP SmallAnchor Targets BC Polished steel targets with hydrophilic sample and calibrant spots surrounded by a hydrophobic barrier for MALDI sample preparation CARE products are designed
More informationicolumn 12 Operation Manual
icolumn 12 Operation Manual AccuBioMed Co., Ltd. 8F.-8, No.5, Wuquan 1st Rd., Xinzhuang Dist., New Taipei City 24892, Taiwan (R.O.C.) Tel: +886-2-2299-5989 Fax: +886-2-2299-2678 www.accubiomed.com AccuBioMed
More informationINSTRUCTION MANUAL HBPH DIFFERENTIAL 2-WIRE (4-20 ma) ph Sensor
INSTRUCTION MANUAL HBPH DIFFERENTIAL 2-WIRE (4-20 ma) ph Sensor TABLE OF CONTENTS 1. GENERAL INFORMATION 2 2. SPECIFICATIONS 2 3. INSTALLATION 3 3.1. General Instructions 3 3.2. HBPH 4-20 ma Sensor 3 4.
More informationROTANTA. Benchtop Centrifuges, non-refrigerated and refrigerated
ROTANTA Benchtop Centrifuges, non-refrigerated and refrigerated ROTANTA HT1408 / HT1409 PERFORMANCE Efficient, results-oriented working processes are top priority in both research and routine laboratories.
More informationPREPARE FOR THE G-STORM
PREPARE FOR THE G-STORM G-STORM THE CUTTING-EDGE THERMAL CYCLER SOLUTION VISIT OUR WEBSITE AND EXPERIENCE THE ENTIRE G-STORM RANGE www.vacutec.co.za THE THERMAL CYCLER SOLUTION YOU VE BEEN WAITING FOR
More informationThe Eye Com 7000 Dual Page Reader Operating and Maintenance Instructions
A MEDIA INDEPENDENT DOCUMENT MANAGEMENT COMPANY EYE COMMUNICATION SYSTEMS, INC. 455 E. Industrial Drive P.O. Box 620 Hartland, WI 53029 USA (262) 367-1360 or (800) 558-2153 Fax: (262) 367-1362 www.eyecom.com
More informationAccessories Optional Extras to Make Processing Simpler in the Lab. Cartridge Holders. Dry Loading Vessels (DLV)
Accessories Optional Extras to Make Processing Simpler in the Lab Dry Loading Vessels (DLV) Biotage SNAP and flash cartridges are designed with ability to dry load a sample within the cartridge. Sometimes,
More informationDDS-12DW Benchtop Conductivity Meter. Instruction Manual BANTE INSTRUMENTS CO., LTD
DDS-12DW Benchtop Conductivity Meter Instruction Manual BANTE INSTRUMENTS CO., LTD DDS-12DW Benchtop Conductivity Meter 1 Introduction Thank you for selecting the DDS-12DW benchtop conductivity meter.
More informationother sizes available on request
ratiolab Cryo Boxes, Cardboard, Format 133 x 133 mm ratiolab Cryo Boxes, Cardboard, Format 133 x 133 mm Ultra low temperature-resistant cardboard. temperature-resistant down to 80 C available with a water-repellent
More informationNew Brunswick Products. Operating Manual M S Revision B+
New Brunswick Products Operating Manual Revision B+ The enclosed Operating Manual was originally produced by the New Brunswick Scientific Company, Inc. About Eppendorf Eppendorf is a biotech company which
More informationTemperature Controlled Shaking
Temperature Controlled Shaking... for all your growing needs Technical specifications Shakers and Mixers Model Reax top Reax control Multi Reax Titramax 100 Titramax 101 Titramax 1000 Vibramax 100 Vibramax
More informationTemperature Controlled Shaking
Temperature Controlled Shaking... for all your growing needs While you concentrate on research, we ll look after your support needs As we want you to have more time to thoroughly concentrate on research,
More informationA world of cryogenic equipment STORAGE BOXES INVENTORY RACKINGS CRYOVIALS ACCESSORIES
µcryotm Catalogue A world of cryogenic equipment STORAGE BOXES INVENTORY RACKINGS CRYOVIALS ACCESSORIES ORDERING INFORMATION Ordering information Please order µcryo products at the following numbers or
More information4 plate fully automated ELISA analyzer Reagent system. Open (Human tests predefined) Throughput (max.) Up to 7 plates / run Reaction / reading system
Specifications & more > > System Specifications > > Consumables > > Accessories System Overview Cat. No. 16300 Analyzer type 4 plate fully automated ELISA analyzer Reagent system Open (Human tests predefined)
More informationReaction Stations. STEM Omni and RS Series
Reaction Stations STEM Omni and RS Series The STEM Omni series and RS series Reaction Stations enable parallel synthesis to be carried out by offering the same controlled temperature and stirring rates
More informationSoxtec 200 series Solvent Extraction Solution
Soxtec 200 series Solvent Extraction Solution Labtec Line Soxtec solvent extraction systems for safe, convenient and economical determination of soluble, or extractable, matter. Typically five times faster
More informationResolution selectable from 0.01 and ph. Range to ph. Accuracy ± ph
ph EC DO ph Resolution selectable from 0.01 and 0.001 ph Range -2.000 to 16.000 ph Accuracy ± 0.002 ph Data logging Manual log on demand Manual log on stability Interval logging Temperature readout ( C
More informationTD2100 Electric Gummed Tape Dispenser Owner s Manual
TD2100 Electric Gummed Tape Dispenser Owner s Manual Marsh Shipping Supply Co. LLC 926 McDonough Lake Road Collinsville, IL 62234 www.msscllc.com Customer Service Phone: (618)-343-1006 Fax: (618)-343-1016
More informationTemperature- Controlled Shaking. Leading Safety Standards Superior Ease of Use Reduced Cost of Ownership
Temperature- Controlled Shaking Leading Safety Standards Superior Ease of Use Reduced Cost of Ownership Leading Safety Standards An overtemperature sensor preventively shuts off the unit in a dangerous
More informationModel VD 23 Vacuum drying chambers for non-flammable solvents
Model VD 23 Vacuum drying chambers for non-flammable solvents A BINDER vacuum drying oven VD series gently dries materials with homogeneous temperature distribution. The patented expansion shelf technology
More informationCLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
More informationReaction Blocks for Circular-top Hot Plate/Stirrers. New sizes Easy to use Complete systems Economical and efficient
Reaction Blocks for Circular-top Hot Plate/Stirrers New sizes Easy to use Complete systems Economical and efficient ACE DynaBloc anodized aluminum blocks are ideal for heating and mixing solutions in a
More informationSOLUTIONS RECERTIFICATION CALIBRATION AND UV/VIS REFERENCE MATERIALS. Photometric and Wavelength Accuracy Reference Material Set
UV/VIS REFERENCE MATERIALS CALIBRATION AND RECERTIFICATION SOLUTIONS Photometric and Wavelength Accuracy Reference Material Set Photometric and Wavelength Accuracy Reference Material Set A set of reference
More informationCooling of. Offering a safe & reliable way to cool semiconductor equipment & applications SOLUTIONS GUIDE
Cooling of Power Electronics Offering a safe & reliable way to cool semiconductor equipment & applications SOLUTIONS GUIDE Bring us your toughest thermal application challenge Mersen will help you maximize
More informationEasyMax Product Catalog
EasyMax Product Catalog EasyMax Family EasyMax 102 Sets EasyMax 402 Sets Reactors Accessories Peripherals Software EasyMax Synthesis Workstations Complete More Successful Experiments Table of Contents
More informationMini vertical unit. Combs
E4100 Mini SDS PAGE, Native PAGE, Gradient, Second dimension and Nucleic acid separations Mini vertical unit = The preferred unit for routine mini protein electrophoresis, the mini vertical unit is constructed
More informationUser Manual. Binocular Stereo Microscope. MicroscopeNet.com
User Manual Binocular Stereo Microscope Model K2213 Series MicroscopeNet.com Table of Contents i. Caution... 1 ii. Care and Maintenance... 1 1. Components Illustration... 2 2. Installation... 3 3. Operation...
More informationD Issue D Original. Instruction Manual. Micro Tool Interface
Instruction Manual D373-60-880 Issue D Original Micro Tool Interface Description SPI Micro-TIM MCM Micro-TIM TEL Micro-TIM SEMI E73 Micro-TIM LAM Alliance Micro-TIM Novellus C3 Micro-TIM Hitachi Micro-TIM
More informationOrder & Inquiry / / Centrifuges Concentrators Laboratory Shakers
Order & Inquiry +82-2-3452-7736 / info@gyrozen.com / www.gyrozen.com GYROZEN 1096R is a large capacity centrifuge for large-volume daily-working processes such as high-throughput sample preparation. This
More informationConsumables for. Part of Thermo Fisher Scientific
Consumables for Part of Thermo Fisher Scientific La-Pha-Pack GmbH, Am Parir 20, D-52379 Langerwehe, website: www.la-pha-pack.com Tel.: (+49) 24 23 / 94 31-0, Fax: (+49) 24 23 / 94 31-33, E-Mail: service@la-pha-pack.com
More information- 1 - TITRAMAX OPERATING MANUAL
- 1 - TITRAMAX OPERATING MANUAL - 2 - Safety Instructions 1. Every user must study these instructions carefully before using the instrument. 2. General operation and safety instructions must be followed.
More informationOMM200 and OMM200T. Metallurgical Microscope
OMM200 and OMM200T Metallurgical Microscope Instruction Manual (Please read the manual carefully before using the microscope) Contents Safety ----------------------------------------------------------------------------
More informationmore samples, more speed your answers faster more savings Cell Culture 1 Choose an Application-Focused Package Proteomics and Genomics
more samples, more speed Limited time offers on packages designed around you and your applications Thermo Scientific Sorvall general purpose centrifuges, rotors and accessories. your answers faster 1 Choose
More informationTemperature- Controlled Shaking. Leading Safety Standards Superior Ease of Use Reduced Cost of Ownership
Temperature- Controlled Shaking Leading Safety Standards Superior Ease of Use Reduced Cost of Ownership Leading Safety Standards An overtemperature sensor preventively shuts off the unit in a dangerous
More informationMINERVA SOLID SURFACE
KITCHEN SINKS, TAPS & WORKTOPS DIRECTORY / SEPTEMBER 2016 MINERVA SOLID SURFACE Manufactured to a full 25 mm thickness with colour throughout, Minerva offers the flexibility to meet all your design needs
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Automatic Tissue Processor MTP INS5500GB 2011-07-08 Instructions MTP 1 Instructions MTP 2 CONTENTS 1. INTENDED USE... 4 2. SYMBOLS... 4 3. SAFETY NOTES... 4 4. COMPONENTS... 5 5.
More informationDisposable Glassware CO R N I N G A N D P Y R E X D I S P O S A B L E G L A S SWA R E D I G I TA L ST I R R I N G H OT P L AT E S...
Disposable Glassware and Equipment CO R N I N G A N D P Y R E X D I S P O S A B L E WA R E........................... 128 D I G I TA L ST I R R I N G H OT P L AT E S............. 135 Digital Stirring Hot
More informationThermo Scientific ALPS 50V User s Guide
Thermo Scientific ALPS 50V User s Guide Important: This product is designed and constructed to be safe when properly used, in accordance with the supplied documentation, and when the operating precautions
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationModel KB 400 Cooling incubators with compressor technology
Model KB 400 Cooling incubators with compressor technology BENEFITS Safe and reproducible incubation conditions even at high environmental conditions Disinfection routine at 100 C MAIN FEATURES Model 400
More informationIntroduction. Kinesis KX vials are the cost-effective choice for standard applications. KX Headspace vials. Index
Vials Introduction Kinesis KX vials are the cost-effective choice for standard applications. All vials are made from Type 1 borosilicate glass ensuring clean, precision fit vials with excellent chemical
More informationRCD Fused Connection Unit Model: RCD10WPV. RCD Double Sockets Models: RCD05WAV, RCD06WPV, RCD07MAV, RCD08MPV. Installation & Operating Instructions
RCD Fused Connection Unit Model: RCD10WPV RCD Double Sockets Models: RCD05WAV, RCD06WPV, RCD07MAV, RCD08MPV Installation & Operating Instructions General The Timeguard range of RCDs provides protection
More informationanalysette 3 particle size analysis quality control sieving for your lab Vibratory Sieve Shaker Microprocessor controlled
analysette 3 Vibratory Sieve Shaker Microprocessor controlled with optical display of all functions Digital adjustment and regulation of amplitude: AMPCONTROL Up to 9 sieve programmes can be saved and
More informationHelmer Scientific Centrifuge Solutions from Hettich
Helmer Scientific Centrifuge Solutions from Hettich Product Guide Clinical and Research TrueBlue Helping you provide the highest standard of patient care Hettich Centrifuges from Helmer Scientific Helmer
More informationApplication Note AN-1028 Design, Integration and Rework Guidelines for BGA and LGA Packages
Application Note AN-1028 Design, Integration and Rework Guidelines for BGA and LGA Packages Table of Contents Page Design considerations...2 Substrate...2 PCB layout...2 Solder mask openings...3 Terminations...4
More informationFully Featured Eddy Current Conductivity Meter ET NDE
Fully Featured Eddy Current Conductivity Meter ET NDE Introducing The SigmaCheck APPLICATIONS Material Verification / Metal Sorting. Heat Treatment Verification. Heat or Fire Damage Investigation. Non-conductive
More informationCENTRIFUGE PRODUCT GUIDE
CENTRIFUGE PRODUCT GUIDE welcome to Hettich For more than 100 years Andreas Hettich GmbH & Co.KG has been a leader in centrifugation technology, innovation and safety. Hettich designs, builds and manufactures
More information