custom test and measuring environments.
|
|
- Eileen Smith
- 5 years ago
- Views:
Transcription
1 3D Probe Positioners Probe-Positioning Systems Key Features: Accurate and Safe Positioning 3D Stepless Clamping System Hands-Free Measuring and Testing PMKs 3D Probe-Positioning System provides a reliable third hand to your daily testing and measuring applications. Typically used for permanent and semi-permanent setups it can be used for demonstrations as well as safe and accurate positioning in general. Especially when using a number of probes and sensors on a single DUT you dont want to miss its flexibilty and simple handling on one hand and their sturdiness and fixation capabilities on the other hand. Accurate Probe-Clamping Systems like the Uniholder give the user even more room for creativity and possibilities for setting up custom test and measuring environments.
2 3D Positioners Assembled within seconds The Probe-Positioning System consists of three parts: Base, positioner and probe holder. It is assembled within seconds using the 7 mm wrench enclosed in the scope of delivery. Stepless adjustment PMK 3D Probe Positioners are infinitely adjustable. The mechanical clamping system makes it possible to position the probing device accurately and easily. The three joints of the 3D Probe Positioner can be fixed and released with a single turn of the tensioning knob. Accurate and safe positioning All PMK Probe positioning systems are ideal for semipermanent measurments. The setup is fast and easy offering greatest flexibility for your every day measuring tasks. Universal usage The PMK 3D Positioning System can be altered to fit different test applications. The customer may choose from four different Bases: Steel Base, Table clamp magnetic foot and vacuum cup aswell as different arm lengths of 130 and 200 mm. The Probe-Holders are interchangeable too. You may choose between the 3-Fold-Holder or Uniholder, wich is not only capable of holding any 2.5 mm and 5.0 mm standard probes, but almost any measuring device up to a clamping width of 17 mm. Twinholder is designed to hold 4 mm Bananaplugs and similar measuring leads.. 2
3 3D Positioners Flexibility from the Base up PMKs 3D Positioning Systems are available with four different kinds of bases: The Steel Base; sufficient for most Setups it provides solid footing even for 200 mm arms. STS 100 ( ) The Table Clamp accepts two arms by default and is very effective if a suitable place for clamping of not more than 40 mm thickness is avalable. TIK 40 ( ) 3
4 3D Positioners Flexibility from the Base up The two different Magnet feet offer either 170 or 300 N on a small footprint of only Ø 30 mm. The Vaccum Cup is most usefull on dry, even surfaces but can become the users only choice if no table is in reach and magnets are no choice due to expected interference. TM 170 / TM 300 ( / ) VAS 85 ( ) Tools and Adapters PMKs 3D Positioners are deliverd with a suitable Hex Wrench AF7. There is one adapter available from M6 to M8 threads as well as the Cameraadapter M6 to 1/4", making all sorts of connections available. GAD MI6 ( MI6) GAD M86 ( M86) ESCH SW7 ( SW7) 4
5 3D Positioners More Adaptability The four available types of Bases fit both types of arms, be it the standard hardcoated STV Models or V2A versions for use in damp or wet environments. Both variants are available with 130 and 200 mm width of span. STV 130 ( ) STV 130 v2a ( V) STV 200 ( ) STV 200 v2a ( V) 5
6 3D Positioners Clamping Variants There are three different Probe Holders in the PMK Portfolio as of now: All of them fit the M6 threads of the PMK Probe Positioning System. The HAL 512 for 2.5 mm and 5 mm The Uniholder with a clamping width of up to probe housings,for use with all PMK 17 mm for more unconventional types of passive probe models and similars. probe housing. HAL 512 ( ) UNIHOLD ( ) The Twinholder accepting two 4mm Bananaplugs and the Twinadapter functioning as a switch for more connections. TWINHOLD ( ) TWA-2xM6 ( ) 6
7 3D Positioners PMK 3D Scope-Probe Positioners Order-No. Type Description incl. Holder MSA 100 PMK Probe-Positioner with steel base, span width 200 mm (HAL512) MSB 40 PMK Probe-Positioner with table clamp, span width 200 mm (HAL512) MSC 85 PMK Probe-Positioner with vacuum cup, span width 200 mm (HAL512) MSM 130 PMK Probe-Positioner with magnet foot, span width 130 mm (HAL512) MSM 200 PMK Probe-Positioner with magnet foot, span width 200 mm (HAL512) MSU 1500 PMK Probe-Positioner with steel base, span width 200 mm (UNIHOLD) Accessories and Spares for 3D Probe-Positioners Order-No. Type Description STS g heavy steel base, Ø 100 mm, Positioner collet M TIK 40 Table clamp, clamping range up to 40 mm for edges and pipes, 2 collets M VAS 85 Vacuum cup M8 incl. 1 x adapter to M6, Ø 85 mm TM 170 Magnet foot 170 N, M6 Ø 30 mm TM 300 Magnet foot 300 N, M8 incl. 1 x adapter to M6, Ø 30 mm STV 130 PMK Probe-Positioner span width 130 mm, M6 / M V STV 130 V2A PMK stainless steel Probe-Positioner span width 130 mm, M6 / M STV 200 PMK Probe-Positioner span width 200 mm, M6 / M V STV 200 V2A PMK stainless steel Probe-Positioner span width 200 mm, M6 / M HAL 512 Probe-Holder for PMK probes and other probing devices span width 5-12 mm, M M86 GAD M86 Thread adapter M8 / M6 SW 13 mm MI6 GAD 1/4"M6 Cameraadapter 1/4" to M UNIHOLD PMK universal Probe Holder "Uniholder" for PMK probes and other reading recorders with Ø mm, M TWINHOLD PMK Twinholder accepting two 4 mm Bananaplugs TWA-2xM6 PMK Twinadapter accepting two M6 threads for simultaneous usage of two probe holders SW7 ESCH SW7 Wrench AF7 7
8 3D Positioners WEEE/ RoHS Directives (EC conformity marking) Your help and efforts are required to protect and keep clean our environment. Therefore return this electronic product at the end of its life either to the Service Department of PMK Mess- und Kommunikationstechnik GmbH or take care of separate WEEE collection and professional WEEE treatment yourself. Do not dispose as unsorted municipal waste. EC Directives: WEEE Directive 2002/96/EC Waste Electrical and Electronic Equipment RoHS Directive 2002/95/EC Restriction of the use of certain Hazardous Substances Safety Information in Electrical and Electronic Equipment To avoid personal injury and to prevent fire or damage to this product or products connected to it, review and comply with the safety informations stated in the manual before using this product. Be aware that if you use this product in a manner not specified the protection this product provides may be impaired. Parts are not shown to scale. Please note, that specifications stated in this document are subject to change without notice. Only qualified personnel should use this product. Manufacturer PMK Mess- und Kommunikationstechnik GmbH Königsteiner Str Bad Soden, Germany Internet: Tel: +49 (0) sales@pmk.de Fax: +49 (0) Revision E - September
TETRIS 1000 / High Impedance Active Probe Order-No: Features:
Features: High Impedance Active Probe Order-No: 881-000-000 881-500-000 High Input Impedance Interchangeable Spring Tips Contacts adjacent Pins in 2.54 mm Pitch Useable with any 50 Ω Measuring Instrument
More informationPML 791-RO Low-Z Passive Probe. Instruction Manual
PML 791-RO Low-Z Passive Probe Instruction Manual Copyright 2011 PMK GmbH All rights reserved. Information in this publication supersedes that in all previously published material. Specifications are subject
More informationTETRIS 2500 High Impedance Active Probe. Instruction Manual
TETRIS 2500 High Impedance Active Probe Instruction Manual Copyright 2018 PMK GmbH All rights reserved. Information in this publication supersedes that in all previously published material. Specifications
More informationKHT 6000 C HV-Probe Calibrator. Instruction Manual
KHT 6000 C HV-Probe Calibrator Instruction Manual Copyright 2015 PMK GmbH All rights reserved. Information in this publication supersedes that in all previously published material. Specifications are subject
More informationdesigned for OMICRON Lab PML 111O High Impedance Passive Probe Instruction Manual
designed for OMICRON Lab PML 111O High Impedance Passive Probe Instruction Manual Copyright 2017 PMK GmbH All rights reserved. Information in this publication supersedes that in all previously published
More informationPMT 201A-RO High Impedance Passive Probe. Instruction Manual
PMT 201A-RO High Impedance Passive Probe Instruction Manual Copyright 2011 PMK GmbH All rights reserved. Information in this publication supersedes that in all previously published material. Specifications
More informationPMT 221A High Impedance Passive Probe. Instruction Manual
PMT 221A High Impedance Passive Probe Instruction Manual Copyright 2011 PMK GmbH All rights reserved. Information in this publication supersedes that in all previously published material. Specifications
More information38 MHz Passive Voltage Probe R&S RT-ZP1X
Manual 38 MHz Passive Voltage Probe R&S RT-ZP1X 1333.1370.02 Printed in Germany Test and Measurement 2 Manufacturer ROHDE & SCHWARZ For comprehensive information about Rohde and Schwarz, please visit our
More informationTA MHz Oscilloscope Probe USER S GUIDE
TA150 350 MHz Oscilloscope Probe USER S GUIDE Copyright 2012 Pico Technology Ltd. All rights reserved. Information in this publication supersedes that in all previously published material. Specifications
More informationOperating manual LRD 325. Conductivity measuring cell to be installed in pipelines
Operating manual Conductivity measuring cell to be installed in pipelines ba55321de02 10/2010 Copyright Weilheim 2010, WTW GmbH Reprinting - even as excerpts - is only allowed with the explicit written
More informationHST -S1 Switching element (Translation of Original Manual)
Installation and Operating Manual for Components HST -S1 Switching element (Translation of Original Manual) HST-S1 Ident.-No.: 10222 HST-S1 Ident.-No.: 10228 HST-S1 Ident.-No.: 10223 HST-S1 Ident.-No.:
More informationBK MIKRO. Air Barrier Adapter. Assembly Instructions Issue 1.00 dated
BK MIKRO Air Barrier Adapter Assembly Instructions Issue 1.00 dated 5.6.2008 MSC Tuttlingen GmbH Rudolf-Diesel-Straße 17 78532 Tuttlingen Germany Tel. +49 7461 925-200 Fax +49 7461 925-268 E-Mail sales@msc-tuttlingen.de
More informationD Issue A. Instruction Manual. Active Strain Gauge
Instruction Manual D357-35-880 Issue A Active Strain Gauge Description ASG2-1000-1/8 NPT ASG2-1000-NW16 ASG2-2000-1/8 NPT ASG2-2000-NW16 Item Number D357-35-000 D357-36-000 D357-37-000 D357-38-000 Declaration
More informationOperation Manual Locator Wöhler L 200
Operation Manual Locator Wöhler L 200 Best.-Nr. 22849 2014-12-18. Contents Contents 1 General Information... 3 1.1 Operation Manual Information... 3 1.2 Notes in this manual... 3 1.3 Proper use... 3 1.4
More informationIncline Plane Tester
Incline Plane Tester OPERATING MANUAL Rhopoint Instruments Bexhill on Sea TN39 3LG Tel. No. +44 (0)1424 739623 Fax No. +44 (0)124 730600 www.hanatekinstruments.com PACKING LIST Incline Plane Tester Bull
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationSystem 16 Precision-Clamping & Welding Bench
UKOP-2.04K16 System 16 Precision-Clamping & Welding Bench System 16 Contents System 16 S4 Welding bench Aluminium Plate with holes Bench legs Stops Squares Prisms Bolts Clamps Fast clamping 2-3 4-5 6-7
More informationOperation Manual SRZ Helical Flow Meters
Operation Manual SRZ Helical Flow Meters Küppers Elektromechanik Contents Liebigstr. 2 85757 Karlsfeld Tel. +49 81 31/59 39 10 Fax +49 81 31/9 26 04... Fehler! Textmarke nicht definiert. 1 General Information...
More informationOperating Manual. English. Digital-Analog Converter DACON8-UMB.
English Digital-Analog Converter www.lufft.de G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany. We reserve the right to amend technical specifications at any time. Contents 1 Please Read Before
More informationMANUAL. Document Version 1.0/March SLIMdrive-500
MANUAL Document Version 1.0/March 2018 SLIMdrive-500 Manual SLIMdrive-500 // PAGE 2 Manual SLIMdrive-500 Document Version 1 from March 2018 The German language version is the original LOGICDATA Electronic
More informationCX 680 SPORTS. Instruction manual
CX 680 SPORTS Instruction manual Important safety instructions In order to prevent damage to health: Set the volume to a low level before inserting the earphones into your ears. Avoid listening at high
More informationHST -M2 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M2 Switching element with locking mechanism (Translation of Original Manual) HST-M2 Ident.-No.: 10214 HST-M2 Ident.-No.: 10626 HST-M2 Ident.-No.: 10218
More informationDuct humidity and temperature sensor for all HVAC duct applications. Designed for control and monitoring applications.
FTK RS485 Modbus Duct sensor for relative humidity and temperature Data Sheet Subject to technical alteration Issue date: 18052015 Application Duct humidity and temperature sensor for all HVAC duct applications
More informationVibration Sensor Type 640
Vibration Sensor Type 640 Standard Zone-1-21 Zone-2-22 Instruction Manual English Instruction Manual Vibration Sensor Type 640 Standard Zone-1-21 Zone-2-22 Edition: 12.04.10 Attention! Before Start-Up
More informationOperating manual GTL 142 GTL 152. Temperature probe. Please keep the manual for future use.
Operating manual Temperature probe GTL 142 GTL 152 Please keep the manual for future use. L01.0.1X.6C-02 GREISINGER electronic GmbH Hans-Sachs-Str. 26 93128 Regenstauf Germany Fon +49(0)9402-9383-0 Fax
More informationWind Transmitter compact xx
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 021075/05/16 Wind Transmitter compact 4.3519.xx.140... 961 ADOLF THIES GmbH & Co. KG Hauptstraße 76
More informationInstallation manual plugs and connectors with screw connection (16/32 A)
EN Installation manual plugs and connectors with screw connection (16/32 60003213 Issue 04.2016 2016-04-01 Table of contents 1 About this manual 3 1.1 Structure of the warnings 3 1.2 Symbols used 4 1.3
More informationSystem 28 Welding and Clamping Table
System 28 Welding and Clamping Table Siegmund System 28 Contents Welding bench S4 Standard Komfort Bench legs Stops Squares Heavy-duty medium and light construction Universal squares Prisms Bolts Clamps
More informationSimply the best fixation. 3D articulated arms Innovative high-quality products
Simply the best fixation. 3D articulated arms Innovative high-quality products 02 Method of operation 04 Measurement Strato Line Base Line Strato µ-line Classic Line Strato set with carrying case Individual
More informationInstruction Manual. G.R.A.S. 1/2, 1/4, and 1/8 CCP Flush-mount microphone sets. LI May 2015
Instruction Manual G.R.A.S. 1/2, 1/4, and 1/8 CCP Flush-mount microphone sets LI0063 29 May 2015 www.gras.dk Revision History Any feedback or questions about this document are welcome at gras@gras.dk.
More informationOperating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationLucid arena pro LED luminaire
Operation, installation and service instructions Lucid arena pro LED luminaire Please read these instructions before installing the luminaires, using them for the first time, storage or handling. These
More informationCOMPACT LED DESK LAMP WITH LCD DISPLAY
COMPACT LED DESK LAMP WITH LCD DISPLAY User manual, Operating- and safety instructions, Warranty conditions LED 12 MON Item no.: MROS501 Getting started and operation 1 180 1. Setting up Place the LED
More informationField module for cold locations for installation in refrigerators for direct control of a pulsed expansion valve
FKE003 Field module for cold locations for installation in refrigerators for direct control of a pulsed expansion valve Features Operation of electronic expansion valves pulsed via integrated electronic
More informationTruVision Dome Brackets Installation Manual
TruVision Dome Brackets Installation Manual P/N 1072649B-EN REV 1.0 ISS 30SEP13 Copyright 2013 UTC Fire & Security Americas Corporation, Inc. Interlogix is part of UTC Climate Controls & Security, a unit
More informationHST -M1 Switching element with locking mechanism (Translation of Original Manual)
Installation and Operating Manual for Components HST -M1 Switching element with locking mechanism (Translation of Original Manual) HST-M1 Ident. No.: 10213 HST-M1 Ident. No.: 10219 HST-M1, pictured Ident.
More informationORB TM 4-20 ma Input Box Installation & Operation Manual
IOM ORB TM 4-20 ma Input Box Installation & Operation Manual ORB TM 4-20 ma Input Box Installation & Operation Manual CONTENTS I. HANDLING & STORAGE... 1 Inspection and Handling Disposal and Recycling
More informationOnline data sheet TBS-1BSGT3506FM TBS TEMPERATURE SENSORS
Online data sheet TBS-1BSGT3506FM TBS A B C D E F Illustration may differ Detailed technical data Features Ordering information Type Part no. TBS-1BSGT3506FM 6053202 Other models and accessories www.sick.com/tbs
More informationTorque Validation Module (TVM)
Assembly Technologies Torque Validation Module (TVM) User Manual Important Safeguards For your protection, please read these instructions completely, and keep this manual for future reference. Carefully
More informationDemonstration Case BENNING DB 1
Operating manual Demonstration Case BENNING DB 1 part no. 044132 Table of contents 1 Introduction...3 2 Safety instructions...4 3 Applicable regulations...5 4 Device description...5 4.1 Measuring / testing...
More informationInstallation Guide MODELS 522 / 526. Pressure Transducers TOLL FREE FAX Web Site.
Installation Guide MODELS 522 / 526 Pressure Transducers 1-800-257-3872 TOLL FREE 1-978-264-0292 FAX www.setra.com Web Site 560550-0087 Rev A Setra offers a complete line of products for these industries:
More informationFusion of electronic pressure sensor and analogue display.
Fusion of electronic pressure sensor and analogue display. Pressure sensors www.ifm.com/gb/pg fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control
More informationCi7-SUB Manual (2.1 EN)
Ci7-SUB Manual (2.1 EN) Symbols on the equipment Please refer to the information in the operating manual. WARNING! Dangerous voltage! Contents Safety precautions...3 Information regarding use of loudspeakers...3
More informationLS 6600 Technical Datasheet
Technical Datasheet Switch for level detection and dry-run protection Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE 06/2011-4001367301
More informationNEW CAPTIS-M COLLET CHUCK. The manually operated collet chuck for rotating and stationary use
NEW CAPTIS-M COLLET CHUCK The manually operated collet chuck for rotating and stationary use CAPTIS-M COLLET CHUCK The modularly designed CAPTIS clamping system gets a new family member: the CAPTIS-M collet
More informationInstallation Guide Philips MP60/70 IntelliVue VHM Arm Rail Mount Kit
Installation Guide Philips MP60/70 IntelliVue VHM Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter (page 2) 2. Describe attachment of Down
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Automatic Tissue Processor MTP INS5500GB 2011-07-08 Instructions MTP 1 Instructions MTP 2 CONTENTS 1. INTENDED USE... 4 2. SYMBOLS... 4 3. SAFETY NOTES... 4 4. COMPONENTS... 5 5.
More informationOperating manual. Diagnostic adapter VAS Operating manual Diagnostic adapter VAS Client documentation Revision: 00 Version: 05/2018
Operating manual Diagnostic adapter VAS 611 009 CAR-connect GmbH info@car-connect.cc www.car-connect.cc Page 1 of 11 Imprint Title: Operating manual of diagnostic adapter VAS 611 009 Manufacturer: CAR-connect
More informationOperating Instructions for Level Switch for Liquids. Model: RFS
Operating Instructions for Level Switch for Liquids Model: RFS 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Use in Hazardous
More informationInstallation Instruction. HART Add-On Module
- Translation Typs 17-A1Z0-0005, B7-A2Z0-0033 and G7-A0Z0-0007 Version for: Non hazardous areas ATEX/IECEx Zone 1 and Zone 2 UL Class I Division 1 and Division 2 Document No.: B1-A2Z0-7N0001 / 400570 Revision
More informationSTYLISH LED DESK LAMP WITH DIFFERENT LIGHT MODES
STYLISH LED DESK LAMP WITH DIFFERENT LIGHT MODES User manual, Operating- and safety instructions, Warranty conditions LED 12 MON Item no.: MROS501 1 Getting started and operation 1. Setting up and connecting
More informationIntroduction. Operating Manual M6 WARNING WARNING CAUTION NOTE TIP. Instructions in the operating manual
M6 Operating Manual Introduction Thank you for choosing a high quality product "MADE IN GERMANY" from TW AUDiO. The M6 multifunctional speaker is equipped with a high-performance 16 ohm 6.5" cone driver
More informationInductive dual sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position of rotary actuators Mounting
More informationHST-X04. Manual Weld TOFD Scanner. User s Manual. DMTA020-01EN Rev. C March 2014
HST-X04 Manual Weld TOFD Scanner User s Manual DMTA020-01EN Rev. C March 2014 This instruction manual contains essential information on how to use this Olympus product safely and effectively. Before using
More information3D-Welding Table Systems
3D-Welding Table Systems www.tempus-holding.de Contents 3D-Welding Table Systems SST-Fix Series & SSTW-Fix Series 2 SST-Flex Series & SSTW-Flex Series 4 SST Accessory Kits 6 Assembly Tables SMT-Fix Series
More informationUser Guide VANTAGE. Lens Drive. Lens Drive. Part No. V
User Guide VANTAGE Lens Drive Lens Drive Part No. V4142-1015 EN www.vinten.com Copyright 2017 All rights reserved. Original Instructions: English All rights reserved throughout the world. No part of this
More informationWolf Laboratories Limited
Wolf Laboratories Limited www.wolflabs.co.uk Tel: 01759 301142 Fax:01759 301143 sales@wolflabs.co.uk Use the above details to contact us if this literature doesn't answer all your questions. Pricing on
More informationInstallation and Maintenance
Installation and Maintenance TT1000 TT3000 TT4000 Version 1.3 e-data GmbH 01.2009 Version 1.3 1-1 1 Usage 1-3 1.1 Protection Class and Protection Type... 1-3 1.2 Safety Measures... 1-3 1.3 Before Commissioning...
More informationInstallation Guide. QBox-V6. Standalone/Spare V6 SDI QBox. Standalone/Spare V6 SDI QBox. Part No. A
Installation Guide Standalone/Spare V6 SDI QBox QBox-V6 Standalone/Spare V6 SDI QBox Part No. A9009-0004 EN www.autocue.com Copyright 2017 All rights reserved. Original Instructions: English All rights
More informationInductive sensor with analog output BI15-M30-LI-EXI
ATEX category II 1 G, Ex-zone 0 ATEX category II 2 D, Ex-zone 21 Threaded barrel, M30 x 1.5 Chrome-plated brass Analog+ Extended operating range 2-wire, 14 30 VDC Analog output 4 20 ma Cable connection
More informationSonoMeter 30 Ultrasonic energy meter for heating and cooling applications
Installation guide SonoMeter 30 Ultrasonic energy meter for heating and cooling applications www.danfoss.com Danfoss A/S DK-6430 Nordborg Denmark CVR nr.: 20 16 57 15 Telephone: +45 7488 2222 Fax: +45
More informationPolymer Electric. Operating Instructions. Control Unit SG-EFS 1X4 ZK2/1 8k2. Version 3
Operating Instructions Control Unit SG-EFS 1X4 ZK2/1 8k2 Version 3 1003100 SG-EFS 104 ZK2/1 8k2 24 V=/~ 7500354 SG-EFS 134 ZK2/1 8k2 230 V~ Original instructions GmbH & Co. KG Polymer Electric Örlinger
More informationInductive sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationGMH Operating Manual for Digital Quick-Response Thermometer
H58.0.01.6C-02 Operating Manual for Digital Quick-Response Thermometer GMH 1170 WEEE-Reg.-Nr. DE93889386 GHM Messtechnik GmbH Standort Greisinger Hans-Sachs-Str. 26 D-93128 Regenstauf +49 (0) 9402 / 9383-0
More informationDaily use. indicating that the loud speakers
BeoLab 8002 Guide WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects
More informationSTR-3 STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER. Mounting and operating instructions
STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA
More informationMX 680 SPORTS. Instruction manual
MX 680 SPOTS Instruction manual Important safety instructions In order to prevent damage to health: Set the volume to a low level before inserting the earphones into your ears! Avoid listening at high
More informationExplosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter
Installation, Operation & Maintenance Sheet Explosion-Protected Arc-Fault Protection ExAFCI Arc-Fault Circuit Interrupter > Contents 1 Contents 1 Contents...2 2 General Information...2 2.1 Manufacturer...2
More informationCDRPan. Installation. Instructions for Planmeca / PM 2002 CC / EC FOR PANORAMIC SYSTEMS
CDRPan FOR PANORAMIC SYSTEMS Installation Instructions for Planmeca / PM 2002 CC / EC Schick Technologies, Inc. 31-00 47 th Avenue Long Island City, New York 11101 (718) 937-5765 (718) 937-5962 (FAX) Part
More informationPolymer Electric. Operating Instructions. Control Unit SG-RST 153. Version 0.3
Operating Instructions Control Unit SGRST 153 Version 0.3 1004931 SGRST 153 Original instructions GmbH & Co. KG Örlinger Straße 1 3 89073 Ulm GERMANY Tel.: +49 731 20610 Fax: +49 731 2061222 EMail: info.ulm@mayser.com
More informationDual Key Access Interlock User Manual - Original Language Version
The AIE dual key access interlock is suitable for use on hinged and sliding doors. The interlock has an open cavity design and is manufactured in an aluminum alloy or durable stainless steel making it
More informationMounting Instruction. Industrial Ethernet Workgroup Switch MACH104 Full Gigabit Family. Mounting Instruction MACH104 Release 07 07/2014
Mounting Instruction Industrial Ethernet Workgroup Switch MACH104 Full Gigabit Family RM Sb MACH104-20TX-F USB V.24 1 3 5 7 9 11 13 15 17 19 21 23 Aufkleber MAC-Adresse P 2 4 6 8 10 12 14 16 18 20 22 24
More informationQuick Startup Guide. datafeed uagate SI. Version: EN Copyright 2016 Softing Industrial Automation GmbH
Quick Startup Guide datafeed uagate SI Version: EN-052016-1.01 Disclaimer of liability The information contained in these instructions corresponds to the technical status at the time of printing of it
More informationInstruction Manual Extreme Temperature (XT) Data Logger
Instruction Manual Extreme Temperature (XT) Data Logger 15 Columbia Drive Amherst, NH 03031 USA Phone: (603) 883-3390 Fax: (603) 886-3300 E-mail: support@monarchinstrument.com Website: www.monarchinstrument.com
More informationOperating Instructions
Innovative by tradition. Operating Instructions Control Unit SG-RSV 239 Version 1 1003986 SG-RSV 239/24 24 V= 1005372 SG-RSV 239/36 36 V= 1003271 SG-RSV 239 50-150 V= Mayser GmbH & Co. KG Örlinger Straße
More informationGas-actuated thermometer Stainless steel version Model 73
Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical
More informationOperating Instructions PRO-AB /6.15. Leakage Current Measuring Adapter
Operating Instructions PRO-AB Leakage Current Measuring Adapter 3-349-621-15 3/6.15 Table of Contents Page 1 Scope of delivery...2 2 Safety Precautions...2 3 General...3 4 Preparing for Measurement...4
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationPHOENIX CONTACT - 01/2008
Ex Basic Terminal Blocks for Intrinsically Safe Signals With Knife Disconnection and Test Connections INTERFACE Data Sheet 102957_00_en PHOENIX CONTACT - 01/2008 1 Description PI-EX-TB and PI-EX-TB/T Ex
More informationOperating Manual UMB ISO Converter ISOCON Order Number: 8160.UISO
Order Number: 8160.UISO Status: V3; 17.09.2010c G. Lufft Mess- und Regeltechnik GmbH, Fellbach, Germany 1 TABLE OF CONTENTS PLEASE READ BEFORE USE... 3 DESCRIPTION... 5 UMB ISO CONVERTER ISOCON... 6 CONFIGURATION...
More informationControl unit SG-EFS 104/2W. EN Operating instructions. Innovative by tradition. Version SG-EFS 104/2W 24 V=/~
Innovative by tradition. Control unit SG-EFS 104/2W EN Operating instructions Version 0.9 1005196 SG-EFS 104/2W 24 V=/~ Original instructions Mayser GmbH & Co. KG Örlinger Straße 1 3 89073 Ulm GERMANY
More informationGRP Flameproof Visual Signal Xenon or Steady LED
GRP Flameproof Visual Signal Xenon Operating instructions Additional languages www.stahl-ex.com General Information Contents 1 General Information...2 1.1 Manufacturer...2 1.2 Information regarding the
More informationPTB 01 ATEX 2064 U, IECEx PTB U. Example / Beispiel / Exemple: Type Operating Instructions
, Equipment protection fuse with Ex mb II C Gb approval Geräteschutzsicherung mit Zulassung Ex mb II C Gb Fusible de protection d appareil avec homologation Ex mb II C Gb Example / Beispiel / Exemple:
More informationOutput signal active note. Output signal. temperature DC V, DC V DC V, DC V DC V
Duct Air Quality Sensor Duct air quality sensor for detection of CO₂ with 0 to10 V output. Optional integrated, humidity, VOC sensors and LCD display. Type Overview Type active CO₂ 22DC-11 22DC-110L 22DCK-11
More informationA-300 Speed Dome. Quick Start Guide
A-300 Speed Dome Quick Start Guide Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the company you purchased the unit from. This manual
More informationOriginal operating instructions Fail-safe inductive sensor GF711S / / 2013
Original operating instructions Fail-safe inductive sensor GF7S 8528 / 5 / 23 Contents Preliminary note...3. Explanation of symbols...3 2 Safety instructions...4 2. Safety-related requirements regarding
More informationUser Manual. Item no.: Otto Graf GmbH Carl-Zeiss-Str. 2-6 Tel.: +49(0) Kunststofferzeugnisse D Teningen Fax: +49(0)
User Manual AquaControl + Rainwater System Controller Item no.: 351027 Otto Graf GmbH Carl-Zeiss-Str. 2-6 Tel.: +49(0)7641-5890 Kunststofferzeugnisse D-79 331 Teningen Fax: +49(0)7641-58950 Page 1 Figure
More informationDiagonal, xx-4. User manual Mounting instruction. Keep this folder with product at all times! PDF 6117 /
Diagonal, 30-409xx-4 User manual Mounting instruction Keep this folder with product at all times! PDF 6117 / 30.09.2014 Page 1 Ropox 2014 Table of Contents TABLE OF CONTENTS... 1 1. INTRODUCTION... 3 2.
More informationENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationLED-Illumination with Control Unit Ident.-No
A HAAG-STREIT COMPANY MÖLLER-WEDEL OPTICAL GmbH, Rosengarten 10, D-22880 Wedel with Control Unit Ident.-No. 773 190 01 Valid from Hardware / Software Rev. / SN 1.0 IDENT.-NO. 217 321 09 Document Version
More informationColorado Series. CR-10 Portable ph / mv / Temperature Meter Operation Manual
Colorado Series CR-10 Portable ph / mv / Temperature Meter Operation Manual 2 Contents Page General Introduction and Initial Inspection.............................. 4 Safety Infomation..................................................
More informationX=2000 Z=2000 X=2000 Z=1600. E0/E150 in µm L/ L/ L/ L/ L/ L/400. R0 in µm
ZEISS MMZ M Specifications Version: November 2017 System description Type according to ISO 10360-1:2000 Moving bridge CMM Operating mode motorized / CNC Sensor mounts Fixed installation of ZEISS VAST gold
More informationUser Manual. Printer P-52RUE
User Manual P-52RUE Overview 3 4 2 5 1 6 13 12 7 11 10 9 8 Overview Table 1 Paper feed button 8 Ethernet RJ45 connection 2 Status indicator 9 USB device connection 3 Paper cutter 10 RS232 connection 4
More informationCASE CODING SOLUTIONS
CASE CODING SOLUTIONS .CORE Elements.CORE Control The.core integrated heads are the essence of what makes inc.jet s industrial printing solutions so successful rugged design, solid connections to external
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationDEEP SEA ELECTRONICS PLC DSE103 MK II Speed Switch Operators Manual
DEEP SEA ELECTRONICS PLC DSE103 MK II Speed Switch Operators Manual Document number 057-135 Author : Paul Gibbons DSE103 MKII Operator Manual Issue 1 Deep Sea Electronics Plc Highfield House Hunmanby North
More informationOperating Manual * * Capacitive filling level probe. Table of contents. 1 Safety Instructions. d e v e l o p i n g s o l u t i o n s
*09005621* BA_EN_NC56 Rev.A 05/14 *09005621* d e v e l o p i n g s o l u t i o n s NC56 Operating Manual Capacitive filling level probe Table of contents 1 Safety Instructions 2 Application Purpose 3 Description
More informationOperation, installation and service instructions. Lucid nova pro LED luminaire
Operation, installation and service instructions Lucid nova pro LED luminaire Please read these instructions before installing the luminaires, using them for the first time, storage or handling. These
More informationUser Manual MagniLink One
User Manual MagniLink One LVI Low Vision International Verkstadsgatan 5 Tel: +46 470-727700 info@lvi.se SE-352 46 Växjö Faks: +46 470-727725 www.lvi.se Table of Contents 1 About LVI... 5 2 Introduktion
More informationIKA Crushing 76 Dispersers (batch operation)
76 Dispersers (batch operation) Dispersers (batch operation) 77 T 18 basic ULTRA-TURRAX Competitively priced dispersing instrument for volumes of 1 to 1.500 ml (H2O). A wide speed range allows you to work
More information