STANDARD THIRD ANGLE PROJECTION DO NOT SCALE DRAWING
|
|
- Jonathan Shields
- 5 years ago
- Views:
Transcription
1
2
3 NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE LIGHT EDM FINISH. EQUIVLENT TO MT INTERIOR SURFCE TEXTURE TO BE: NONE 4. LL INSIDE RDII.00R. LL OUTSIDE RDII.020R MX, UNLESS OTHERWISE SPECIFIED. 5. LL EXTERNL DIMENSIONS FFECTED THE DRFT PPLY T THE LRGE END OF THE FETURE, ND LL INTERNL FETURES FFECTED THE DRFT PPLY T THE SMLL END OF THE FETURE UNLESS OTHERWISE SPECIFIED. 6. DEGREE DRFT IN THE DIRECTION OF PULL IS PERMISSIBLE UNLESS OTHERWISED SPECIFIED. 7. MTERIL / COLOR: BS PLSTIC IS STNDRD IN BLCK OR WHITE. CUSTOM MTERILS ND COLORS RE VILBLE UPON REQUEST FOR QUOTE. 8. PCB S RE RECOMMENDTIONS ONLY. FINL S ND VERIFICTION OF ITS FIT RE THE SOLE RESPONSIBILITY OF ECH CUSTOMER. 9. SSEMBLY HRDWRE PROVIDED. BTTERY CONTCTS SOLD SEPERTELY 0. THIS DRWING IS BSED ON SOLID MODEL, ND IS FURTHER DEFINED THE SOLID MODEL FILE. 2550(x) CONFIGURTIONS -Blank -K -WP 2550 COVER 2550 BSE 2550 MCHINED BSE 2550 HTCH 2550 WLL CRDLE #2 HiLo SCREW.375" 4 4 R E V I S I O N REV. ECO No DESCRIPTION PPROVED PRELIMINRY RELESE 6-Mar-2009 D.C UP MODEL, DD DRFT ND FORMT 8-pr-2009 D.C DD SURFCE CLLOUT ND MODIFY HTCH 4-Dec-2009 D.C UP FORMT 20-Mar-200 D.C DD CORING IN RER 04-May-200 D.C UP VIEWS ND 2ND-OP PGE 28-Jul-200 D.C. 5.0 R CRUZ 773 DD "TLL" CONFIGURTION 0-Nov-203 D.C. 6.0 R CRUZ 224 INCLUDE WLL CRDLE OPTION 9-May-204 D.C CHNGE TEXTURE CLLOUT 2-May-204 D.C. 7. R CRUZ 036 UP WLL CRDLE DIMENSIONS TO S BUILT 8-Jun-204 D.C. 524 REMOVE TLL CONFIG ND INCLUDE PCB NOTCH 5-Dec STNDRD ITEM -SINGL-CONTCT-POS -SINGL-CONTCT-NEG -DBL-CONTCT 2550_WLL-CRDLE 2550_HTCH 2550_COVER 2550_BSE NO_2_HI-LO_SCREW 2550_PCB -BTTERY FILE NME CC-POS-5226 SPRING STEEL CC-NEG-5204 SPRING STEEL CC-DBL-524L SPRING STEEL 2550 WLL CRDLE - STNDRD BS 2550 HTCH - STNDRD BS 2550 COVER - STNDRD BS 2550 BSE - STNDRD BS No2 HI-LO x.375" STEEL REFERENCE ONLY CUSTOMER SUPPLIED REFERENCE ONLY CUSTOMER SUPPLIED DESCRIPTION MTERIL BILL OF MTERILS SOLD SEPERTELY SOLD SEPERTELY SOLD SEPERTELY BLCK or WHITE BLCK or WHITE BLCK or WHITE BLCK or WHITE 3/8" LONG.062" THICK "" COLOR 4 2 QTY. 6 THIRD NGLE PROJECTION DO NOT DRWING NOTICE: THE INFORMTION ND DT CONTINED HEREIN IS CONSIDERED PROPRIETRY TO LLTEC INTEGRTED MFG INC & SHLL REMIN THE EXCLUSIVE PROPERTY OF LLTEC INTEGRTED MFG INC THE HOLDER WILL SSUME CUSTODY ND CONTROL THT THIS DOCUMENT WILL NOT BE COPIED, REPRODUCED, OR DISCLOSED WITHOUT THE EXPRESS WRITTEN CONSENT OF LLTEC INTEGRTED MFG INC POSSESSION OF THIS DOCUMENT DOES NOT CONSTITUTE GRNT TO MNUFCTURE NY ITEMS. 204 EXPLODED VIEW 2550K X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Mar Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 2550_R8_0 7 OF 8
4 .080 SECTION C-C P F R.65 SEE DETIL B SEE DETIL.599 C C.000 P F SECTION F-F SECTION P-P PCB CPTURED.070 SECTION Y-Y DETIL B DETIL NOTE: BTTERY CONTCT TBS CN BE PUSHED THROUGH THE PCB ND SOLDERED TO THE SURFCE OR THE TB CN BE BENT BCK T 90 ND WIRED. X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Mar Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 2550_R8_0 2 OF 8
5 .025 S COVER SECTION F-F D (.78) F F D 2550 STNDRD SECTION D-D R X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Mar Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 2550_R8_0 3 OF 8
6 S BSE J INSIDE LBEL RE E E SECTION J-J.000 J R.207 SECTION E-E.50 X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 6-Mar _R8_0 SHEET 4 OF 8 REV.DOC
7 .452 S WLL CRDLE SECTION Y-Y nd OPERTION REQUIRED ON 2550 BSE TO CCEPT CRDLE TBS SECTION X-X.360 SECTION Y-Y X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Mar Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 2550_R8_0 5 OF 8
8 S PCB x2 x2 x2 x x2.225 x x x2 R R NOTE. BTTERY CONNECTION POINTS SHOWN T BOTH ENDS TO LLOW LTERNTE SSEMBLY OPTION. X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Mar Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 2550_R8_0 6 OF 8
9 2nd OPERTION DETILS (PGE OF 2) DELIVERS YOUR ENCLOSURE MRKET-REDY WITH IN-HOUSE CNC MCHINING, PD PRINTING, SSEMBLY, ND FULFILLEMENT. LL SURFCES ND RES RE VILBLE FOR CNC LTERTION CLL (805) FOR PRICING ND SCHEDULE. THE INSIDE RDIUS OF NY MCHINED FETURES SHOULD BE NO SMLLER THN.03" x NOTCHES FOR WLL CRDLE x STEP 2550 BSE.000 STEP 2 SXX-2550X-XXX BSE - BS, BLCK STEP NO DESCRIPTION CUTTER FIXTURE ORIENTTION PROGRM -B-C CRDLE NOTCHES T2 =.062" EM 90 SINGLE - 2-B-C2 CRDLE NOTCHES T2 =.062" EM 90 SINGLE - X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Mar Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 2550_R8_0 7 OF 8
10 2nd OPERTION DETILS (PGE 2 OF 2) DELIVERS YOUR ENCLOSURE MRKET-REDY WITH IN-HOUSE CNC MCHINING, PD PRINTING, SSEMBLY, ND FULFILLEMENT. LL SURFCES ND RES RE VILBLE FOR CNC LTERTION CLL (805) FOR PRICING ND SCHEDULE. THE INSIDE RDIUS OF NY MCHINED FETURES SHOULD BE NO SMLLER THN.03" 2550 COVER.000 SXX-2550X-XXX COVER - BS, BLCK STEP NO DESCRIPTION CUTTER FIXTURE ORIENTTION PROGRM -C-C - T2 =.062" EM C-C2 - T2 =.062" EM X.XX =.05 X.XXXX =.00 X.XXX =.00 X.X = Customer's Part No: Mar Santa Fe Road San Luis Obispo, C ph. (805) fax (805) SXX-2550X SSEMBLY 2550_R8_0 8 OF 8
MEDIUM 3 AA - STANDARD SXX XXX
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE EDM FINISH. EQUIVLENT TO MT-020. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS
More informationFrom Off-The-Shelf to Market-Ready New Age Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your
From Off-The-Shelf to Market-Ready New ge Enclosures is your Single Source Solution. Let us quote modifiying our Stock Enclosures to meet your end-use. visit newageenclosures.com/services or call 855-4N-ENCL
More information1.0. R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO BE R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO BE EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT BECOMES
More informationNOTE 12 USB OPENING 'U' & 'UB' SERIES ONLY USB CAP NOT SHOWN NOTE 12 USB OPENING U & UB SERIES ONLY THIRD ANGLE PROJECTION DO NOT SCALE DRAWING
P80804(x) CONFIGURTIONS -S -U -UB -UBC -UBB -B -C P80804 COVER P80804 COVER w/usb OPENING P80804 COVER w/usb & BUTTON HOLE P80804 BSE P80804 BSE w/usb P80804 BUTTON P20603 CP 'UB' SERIES ONLY R E V I S
More informationTHIRD ANGLE PROJECTION DO NOT SCALE DRAWING
NOTES: UNLESS OTHERWISE SECIFIED. CORNERS DRWN SHR TO BE R.005 MIMUM. 2. ETERIOR SURFCE TETURE TO BE LIGHT EDM FINISH. EQUIVELNT TO MT-020. 3. INTERIOR SURFCE TETURE TO BE: NONE. 4. LL INSIDE RDII.00R.
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 560395 09//04 00666. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO. PRT NUMBER DESCRIPTION QTY. 5450 HDS-7X LIFT SUPERSTRUCTURE
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 560393 09//04 00666. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO. PRT NUMBER DESCRIPTION QTY. 545007 HDS-7 LIFT SUPERSTRUCTURE
More information(n1.43 [36]) (n1.31 [33]) (0.69 [18])
REV PPROVED INITIL RELESE //6 MP D D (n. [6]) (n. []) (.8 [8]) (0.69 [8]) NEOPRENE WSHER /8-8 UNEF- THRED SUPPLIER PRINT EPTNE: [ ] ccept drawing/specification: No changes needed: [ ] This part is RoHS
More informationXPR10A. BendPakSKU
Ser vi cemanual S er vi cepar t s& Di agr ams T hi sgui dei sat r oubl es hoot i ngr ef er enceus edf ormai nt ai ni ngands er vi ci ngyour BendPakpr oduct.i tpr ovi descompr ehens i vei nf or mat i ononi
More informationLow-Voltage Controls and Distribution
Commnding nd Signling evices Pushbuttons nd Indictor Lights Consoles Switches Signling Columns Reference Mnul April 2009 Low-Voltge Controls nd istribution Commnding nd Signling evices 4 Introduction
More informationWelch Allyn CardioPerfect Workstation Installation Guide
Welch Allyn CrdioPerfect Worksttion Instlltion Guide INSTALLING CARDIOPERFECT WORKSTATION SOFTWARE & ACCESSORIES ON A SINGLE PC For softwre version 1.6.6 or lter For network instlltion, plese refer to
More information(1.50) .035 MIN HOLE AND SLOT MIN
X.096 THRU ISION HISTORY DESCRIPTION DTE PPROVED DDED DETIL WITH PINOUT 6/7/07 KMW DDED SENSOR ORIGINS PG. 8//07 KMW NOTE : THIS DRWING IS NOT TO E USED FOR MNUFCTURE OR INSPTION NOTE : DRWINGS NOT OWN
More informationDETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD RECEPTACLE, CARD INSERTION, CONTACT SPACING (.156), TYPES A AND AD
IN-POUND MIL-DTL-1097/1 w/mendment 1 1 uly 011 SUPERSEDING MIL-DTL-1097/1 7 pril 010 DETIL SPEIFITION SEET ONNETORS, ELETRIL, PRINTED WIRING ORD REEPTLE, RD INSERTION, ONTT SPING (.156), TYPES ND D This
More informationMetal Element Current Sense Resistor
Metl Element Current Sense Resistor UR Series Robust metl strip ble to withstnd high temperture nd high current. ow TCR nd Inductnce Resistnce Rnge from m to 15 m Power rtings from 1W to 3W in 1206, 2010
More informationECE 468/573 Midterm 1 September 28, 2012
ECE 468/573 Midterm 1 September 28, 2012 Nme:! Purdue emil:! Plese sign the following: I ffirm tht the nswers given on this test re mine nd mine lone. I did not receive help from ny person or mteril (other
More informationDixie Narco Retrofit Kit
PERSONAL NOTES AND COMMENT AREA Write ny pertinent notes or comments regrding your prticulr instlltion here. Optipy BV/RC/CC into Pepsi Vending Mchine This document contins informtion for instlling nd
More informationprisms Prisms Specifications Catalogue number BK7 Wedge, Beam Deviation, deg
Cotings Wedge Steer bems in opticl systems Cn be used in pirs for continuous ngulr djustment T Hving selected n pproprite wedge, it is esy to crete precise bem devition without ffecting other bem prmeters.
More informationRELEASE STATUS Production REAR ISO FRONT ISO SHIPPING WEIGHT: 220 LBS MATERIAL: ENCLOSURE - 44U X 30W X 42D S-SERIES W/ RACK HYGIENE
ESE STTUS RER ISO FRONT ISO SHIPPING WEIGHT: 220 LBS 03/04/15 Rrora REPLCE PDUBRCKTW WITH PDUBRCKTWPMT (WIDER PDU BRCKET) ECO-077724 REV REV. DTE REV'D BY CURRENT REVISION DESCRIPTION ECN OR EPR NUMBER
More informationELUM TM Series Right Angle Illuminated Latching Pushbutton
LED FREE COMPTIBLE OPTION ELUM TM Series Right ngle Illuminated Latching Features/Benefits SPDT (N.O. & N.C.) Low height above PCB Reliable self-cleaning contact Surface-mount or thru-hole PCB Standard
More informationRoyal RVHV Retrofit Kit
Optipy BV/RC/CC into Royl Vending Mchine This document contins informtion for instlling nd configuring the JCM Optipy DBV-01 Bill Vlidtor, RC-10 Bill Recycler nd A-66 Coin Chnger into Royl RVHV 768-12
More informationCROSS REFERENCE INDEX
United Technologies THIS DOCUMENT ND THE INFORMTION CO NTINED THEREIN IS PROPRIETRY TO CRRIER CORPORTION ND SHLL NOT BE USED OR DISCLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION
More informationEasy Interactive Tools Ver.3.0 Operation Guide
Esy Interctive Tools Ver.3.0 Opertion Guide Esy Interctive Tools Summry 2 Fetures Esy Interctive Tools is n ppliction tht llows you to drw on projected imges. By using the interctive pen supplied with
More informationPOWER COMBICON spring-cage connector 7.62 mm pitch SPC 5/...-ST(F)-7,62
spring-cge connector SPC 5/...-ST(F)- Especilly in the high current rnge, the following is true for conductor connection: Time is money. The new spring-cge plug SPC 5 sves both, s due to the quick spring-cge
More informationA Studco Innovation. Architectural Finishings
Architecturl Finishings A Studco Innovtion Clen Lines, No Architrve Custom Shdowline EZ Concept Architecturl Finishing Systems is complete solution for chieving the ultimte clen line interior finish for
More informationEpson Projector Content Manager Operation Guide
Epson Projector Content Mnger Opertion Guide Contents 2 Introduction to the Epson Projector Content Mnger Softwre 3 Epson Projector Content Mnger Fetures... 4 Setting Up the Softwre for the First Time
More informationFile Manager Quick Reference Guide. June Prepared for the Mayo Clinic Enterprise Kahua Deployment
File Mnger Quick Reference Guide June 2018 Prepred for the Myo Clinic Enterprise Khu Deployment NVIGTION IN FILE MNGER To nvigte in File Mnger, users will mke use of the left pne to nvigte nd further pnes
More informationNET-ACCESS S TYPE VED READY CABINET NO CASTERS 800mm WIDE X 1200mm DEEP FAMILY 12V352CJ-DC VED TOP CAP SOLID REAR FRONT SINGLE HINGE SPLIT SIDE PANEL
SPLIT SIDE VED TOP CP SINGLE HINGE SPLIT SIDE SOLID. VISIT OUR ON-LINE CTLOG T WWW.PNDUIT.COM FOR LIST OF CURRENT PRTS PPLICLE FOR USE WITH THIS PRODUCT.. PRIMRY DIMENSIONS RE IN MILLIMETERS. 3. INDEPENDENT
More informationSage CRM 2018 R1 Software Requirements and Mobile Features. Updated: May 2018
Sge CRM 2018 R1 Softwre Requirements nd Mobile Fetures Updted: My 2018 2018, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The Sge
More informationGXR-GPS GXR-GPS-485 User Manual
GXR-GPS GXR-GPS-485 User Mnul GeoSIG Ltd, Wiesenstrsse 39, 8952 Schlieren, Switzerlnd Phone: + 41 44 810 2150, Fx: + 41 44 810 2350 info@geosig.com, www.geosig.com Pge ii Document Revision GS_GXR_GPS_User_Mnul_V05.doc
More informationPre-Drilled Standard Support Angles
Pre-Drilled ngles Standard Support Pre-Drilled Standard Support ngles UDB-750200 Series dd for luminum. UNEQUL LEGS MTERIL VILBILITY DETERMINES ONE OR TWO PIECE NGLE CONSTRUCTION. This Pre-Drilled Unequal
More informationEngineer To Engineer Note
Engineer To Engineer Note EE-188 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit
More information1500W Programmable Single Output
Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 105%) Progrmmle output Current (0% ~ 105%) Forced current shring t prllel opertion Refer to pg. 5 for connection digrm) Constnt current
More informationInstallation Guide AT-VTP-800
Velocity 8 Touch Pnel The Atlon -BL nd -WH re 8 touch pnels in blck nd white, respectively, for the Atlon Velocity Control System. They feture contemporry, refined styling for modern presenttion environments
More information800W Programmable Single Output
Fetures: U Design Progrmmle output Voltge (0% ~ 05%) Universl AC input / Full rnge Progrmmle output Current (0% ~ 05%) Refer to pg. 5 for connection digrm) Forced current shring t prllel opertion Constnt
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
00 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 0-3-4 PS 8-9- DP TOP CP RELESED TO PRODUCTION KNOCK-OUTS FOR PDU POWER CORD
More informationPRISMS. Don t see exactly what you are looking for? CVI Laser Optics specializes in prototype to volume production manufacturing!
PRISMS Mirrors CVI Lser Optics mnufctures lrge selection of high qulity prisms for use in mny pplictions including diverse industril nd scientific uses, lser trcking nd lignment, spectroscopy, nd militry
More informationD DF DB EXT EXP. Matching specie veneer on 11/16 thick cabinet sides
Exposed Ends (EXP) D DF DB EXT EXP FL MI STR FT FTRA Mtching specie veneer on 1/2 thick cbinet sides Avilble in Crftsmn nd Pioneer lines Specify: L (Left), R (Right) or B (Both) 7/32 revel from edge of
More informationInnovative Video Intercom Kits
HFX-700m HFX-900l HFX-720ms Innovtive Video Intercom Kits HFX 700m olor Hnds Free Kit with 3.5 LD Monitor wiring digrms bsic wiring digrm HFX-700M Expnsion monitors (EX-700H or EX-700A). Must be connected
More informationvcloud Director Service Provider Admin Portal Guide vcloud Director 9.1
vcloud Director Service Provider Admin Portl Guide vcloud Director 9. vcloud Director Service Provider Admin Portl Guide You cn find the most up-to-dte technicl documenttion on the VMwre website t: https://docs.vmwre.com/
More informationSage CRM 2017 R3 Software Requirements and Mobile Features. Updated: August 2017
Sge CRM 2017 R3 Softwre Requirements nd Mobile Fetures Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned herein re the trdemrks of The
More information12V305TM-DC DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP SIDE PNEL KNOCK-OUTS FOR PDU POWER CORD PERFORTED SINGLE HINGE SIDE PNEL RER PERFORTED
More informationMLH REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL RIGHTS THERETO
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. REVISIONS LTR DESCRIPTION ECO NUM. DTE PPROVED C UPDTED FORMT DD1727 1/31/08
More informationLoRaWANTM Concentrator Card Mini PCIe LRWCCx-MPCIE-868
Dt Sheet LoRWANTM Concentrtor Crd Mini PCIe LRWCCxMPCIE868 LoRWANTM Concentrtor Crd bsed on Semtech SX30 nd SX308 Chips in Mini PCIe Form Fctor The nfuse LRWCCxMPCIE fmily of crds enble OEMs nd system
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
00 2 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 0-3-4 PS 8-29-2 DP TOP CP RELESED TO PRODUCTION KNOCK-OUTS FOR PDU POWER
More informationEasyMP Multi PC Projection Operation Guide
EsyMP Multi PC Projection Opertion Guide Contents 2 Introduction to EsyMP Multi PC Projection 5 EsyMP Multi PC Projection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters
More informationRELEASE STATUS Production FRONT ISO SHIPPING WEIGHT: 340 LBS MATERIAL: CONFIG - 44U X 24W X 42D S-SERIES W/ RACK HYGIENE REAR DOOR HIGH FLOW
RELESE STTUS Production FRONT DOOR HIGH FLOW RER DOOR HIGH FLOW DIVIDER PNEL RER ISO FRONT ISO SHIPPING WEIGHT: 340 LBS Rrora REPLCE PDUBRCKTW WITH PDUBRCKTWPMT (WIDER PDU BRCKET) ECO-077724 REV REV. DTE
More informationTEK-F LEX 4100B. Two-wire Loop-powered OEM TDR Level Transmitter. LEVEL. Technology Solutions
Technology Solutions TEK-F LEX 4100B Two-wire Loop-powered OEM TDR Level Trnsmitter LEVEL www.tek-trol.com Flow Level Temperture Pressure Vlves Anlyzers Accessories TekVlSys Introduction Tek-Flex 4100B
More informationQEL 33A/35A, 98/99 Series
*24908394* 24908394 Bseplte Conversion Kit QEL 33A/35A, 98/99 Series Instlltion Instructions 1. This kit converts ll 33/35A nd 98/99 series EL devices nd fire devices uilt prior to Oct. 2014 to quiet electric
More informationEngineer To Engineer Note
Engineer To Engineer Note EE-169 Technicl Notes on using Anlog Devices' DSP components nd development tools Contct our technicl support by phone: (800) ANALOG-D or e-mil: dsp.support@nlog.com Or visit
More informationc360 Add-On Solutions
c360 Add-On Solutions Functionlity Dynmics CRM 2011 c360 Record Editor Reltionship Explorer Multi-Field Serch Alerts Console c360 Core Productivity Pck "Does your tem resist using CRM becuse updting dt
More informationSimrad ES80. Software Release Note Introduction
Simrd ES80 Softwre Relese 1.3.0 Introduction This document descries the chnges introduced with the new softwre version. Product: ES80 Softwre version: 1.3.0 This softwre controls ll functionlity in the
More informationMulti-position printed circuit termination blocks for through hole reflow applications
Multi-position printed circuit termintion blocks for through hole reflow pplictions With the modern SMT solder technology, proven housing profiles from the printed circuit terminl block rnge from Phoenix
More informationTECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA. Displaying the PCAP Data Column
TECHNICAL NOTE MANAGING JUNIPER SRX PCAP DATA APRIL 2011 If your STRM Console is configured to integrte with the Juniper JunOS Pltform DSM, STRM cn receive, process, nd store Pcket Cpture (PCAP) dt from
More informationREV A NOMINAL LINE + 1 % OF NOMINAL OUTPUT VOLTAGE MEASURED AT O/P CONNECTOR
PROPRIETRY INFORMTION: PROPRIETRY OF GLOBTEK, INC. NY REPRODUCTION, DISCLOSURE OR USE OF THIS DRWING, IN WHOLE OR IN PRT, IS HEREBY PROHIBITED EXCEPT S SPECIFIED IN WRITING BY GLOBTEK, INC. REV REVISION
More informationREVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL RIGHTS THERETO
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. REVISIONS LTR DESCRIPTION ECO NUM. DTE PPROVED D DD 48VDC PROTECTION MODULE 7757
More information1500W Programmable Single Output 15V 24V 30V 36V 48V 60V 100A 62.5A 50A 41.7A 31.3A 25A. ±5.0% Typical adjustment by potentiometer.
500W Progrmmle Single Output Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 05%) Progrmmle output Current (0% ~ 05%) Forced current shring t prllel opertion Constnt current limit
More informationEpson iprojection Operation Guide (Windows/Mac)
Epson iprojection Opertion Guide (Windows/Mc) Contents 2 Introduction to Epson iprojection 5 Epson iprojection Fetures... 6 Connection to Vrious Devices... 6 Four-Pnel Disply... 6 Chnge Presenters nd Projection
More informationV12 FAMILY BRAND GUIDELINES
V12 FAMILY BRAND GUIDELINES LOGO The logo is n importnt element of our visul identity. It must not be re-drwn or ltered in ny wy nd hs size nd minimum spce requirements to ensure tht it is lwys visully
More informationNET-ACCESS S TYPE CABINET 800mm WIDE X 1070mm DEEP FAMILY 12V305TL-DC KNOCK-OUTS FOR POU POWER CORD TOP CAP FRONT DOOR REAR SPLIT DOORS
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL TOP CP KNOCK-OUTS FOR POU POWER CORD SIDE PNEL RER S. VISIT OUR ON-LINE CTLOG
More informationTyvak Nanosatellite Launch Adapter System (NLAS) Mk. II User Guide. (TK-NLASUG-Rev1)
Tyvak Nanosatellite Launch dapter System (NLS) Mk. II User Guide (TK-NLSUG-Rev1) TYVK NNO-STELLITE SYSTEMS Page 1 of 18 CHNGE HISTORY LOG Effective Date Revision Description of Changes 1/16/2015 1 Initial
More informationNET-ACCESS S TYPE CABINET 700mm WIDE X 1200mm DEEP FAMILY 12V305TK-DC KNOCK-OUTS FOR POU POWER CORD TOP CAP REAR SPLIT DOORS FRONT DOOR
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL TOP CP KNOCK-OUTS FOR POU POWER CORD SIDE PNEL RER S. VISIT OUR ON-LINE CTLOG
More informationMcAfee Network Security Platform
Mnger Applince Quick Strt Guide Revision B McAfee Network Security Pltform This guide is high-level description of how to instll nd configure the Mnger Applince. For more detiled instlltion informtion,
More information800W Programmable Single Output. 105% rated output power, Protection type: Constant current limit
Fetures: Universl AC input / Full rnge Progrmmle output Voltge (0% ~ 05%) Progrmmle output Current (0% ~ 05%) Forced current shring t prllel opertion Constnt current limit Selectle +5V / 0.5A or +9V /
More informationSeries LJ1. Uniaxial Electric Actuator
CAT.E 90- Unixil Electric Actutor Controller Teching Box Unixil Electric Actutor Series LJ Series LJ Series LC Series LC for horizontl mounting nd brke for verticl mounting hve been dded to the high rigidity
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 KNOCK-OUT FOR PDU POWER CORD PERFORTED SINGLE HINGE SIDE PNEL INTEGRL CINET
More informationAddress/Data Control. Port latch. Multiplexer
4.1 I/O PORT OPERATION As discussed in chpter 1, ll four ports of the 8051 re bi-directionl. Ech port consists of ltch (Specil Function Registers P0, P1, P2, nd P3), n output driver, nd n input buffer.
More informationTixeo compared to other videoconferencing solutions
compred to other videoconferencing solutions for V171026EN , unique solution on the video conferencing field Adobe Connect Web RTC Vydio for High security level, privcy Zero impct on network security policies
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL KNOCK-OUT FOR PDU POWER CORD PERFORTED SINGLE HINGE SIDE PNEL INTEGRL CINET TOP
More informationSage CRM 2017 R2 Software Requirements and Mobile Features. Revision: IMP-MAT-ENG-2017R2-2.0 Updated: August 2017
Sge CRM 2017 R2 Softwre Requirements nd Mobile Fetures Revision: IMP-MAT-ENG-2017R2-2.0 Updted: August 2017 2017, The Sge Group plc or its licensors. Sge, Sge logos, nd Sge product nd service nmes mentioned
More informationRELEASE STATUS Production FRONT ISO SHIPPING WEIGHT: 370 LBS MATERIAL: CONFIG - 44U X 30W X 42D S-SERIES W/ RACK HYGIENE REAR DOOR HIGH FLOW
RELESE STTUS Production FRONT DOOR HIGH FLOW RER DOOR HIGH FLOW DIVIDER PNEL RER ISO FRONT ISO SHIPPING WEIGHT: 370 LBS Rrora REPLCE PDUBRCKTW WITH PDUBRCKTWPMT (WIDER PDU BRCKET) ECO-077724 REV REV. DTE
More informationUT1553B BCRT True Dual-port Memory Interface
UTMC APPICATION NOTE UT553B BCRT True Dul-port Memory Interfce INTRODUCTION The UTMC UT553B BCRT is monolithic CMOS integrted circuit tht provides comprehensive MI-STD- 553B Bus Controller nd Remote Terminl
More informationGeometry/Trig 2 Unit 3 Review Packet Answer Key
Unit 3 Review Pcket nswer Key Section I Nme the five wys to prove tht prllel lines exist. 1. If two lines re cut y trnsversl nd corresponding ngles re congruent, then the lines re prllel.. If two lines
More informationCOMPUTER EDUCATION TECHNIQUES, INC. (MS_W2K3_SERVER ) SA:
In order to lern which questions hve een nswered correctly: 1. Print these pges. 2. Answer the questions. 3. Send this ssessment with the nswers vi:. FAX to (212) 967-3498. Or. Mil the nswers to the following
More informationCOMBICON Spring Cage Plugs and Headers with Self-Locking Flange 5.08 mm Pitch
COMBICON Spring Cge Plugs nd Heders with Self-Locking Flnge The new FKC-RF spring cge plug offers new locking system: the fst plug locking system bsed on the "click'n lock" principle. When the plug is
More informationAUTOMOTIVE CAPABILITY DIRECTORY INFORMATION PACK Sponsorship - Advertising - Listings
AUTOMOTIVE ELECTRONICS E CS CAPABILITY DIRECTORY 2017 INFORMATION PACK Sponsorship - Advertising - Listings ABOUT THE DIRECTORY AESIN will be publishing their exclusive UK Automotive Electronics Cpbility
More informationRegistering as a HPE Reseller. Quick Reference Guide for new Partners in Asia Pacific
Registering s HPE Reseller Quick Reference Guide for new Prtners in Asi Pcific Registering s new Reseller prtner There re five min steps to e new Reseller prtner. Crete your Appliction Copyright 2017 Hewlett
More informationSmall Business Networking
Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology
More informationSHEET 1 OF 14
Electronic Master PRINTED COPIES RE UNCONTROLLED Rosemount Proprietary REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE REMOVED SNP-RING HOLDER DSI1002683 MH 06/24/09 NOTES: 1. 2. 3. 4. 5. 6. ROSEMOUNT INC.
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP FRONT SIDE PNEL SIDE PNEL KNOCK-OUTS FOR PDU POWER CORD RER PERFORTED S. VISIT OUR
More informationEnginner To Engineer Note
Technicl Notes on using Anlog Devices DSP components nd development tools from the DSP Division Phone: (800) ANALOG-D, FAX: (781) 461-3010, EMAIL: dsp_pplictions@nlog.com, FTP: ftp.nlog.com Using n ADSP-2181
More informationRegistering as an HPE Reseller
Registering s n HPE Reseller Quick Reference Guide for new Prtners Mrch 2019 Registering s new Reseller prtner There re four min steps to register on the Prtner Redy Portl s new Reseller prtner: Appliction
More informationpdfapilot Server 2 Manual
pdfpilot Server 2 Mnul 2011 by clls softwre gmbh Schönhuser Allee 6/7 D 10119 Berlin Germny info@cllssoftwre.com www.cllssoftwre.com Mnul clls pdfpilot Server 2 Pge 2 clls pdfpilot Server 2 Mnul Lst modified:
More informationSmall Business Networking
Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd business. Introducing technology
More informationMIPS I/O and Interrupt
MIPS I/O nd Interrupt Review Floting point instructions re crried out on seprte chip clled coprocessor 1 You hve to move dt to/from coprocessor 1 to do most common opertions such s printing, clling functions,
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL DOOR 2 KNOCK-OUT FOR PDU POWER CORD SIDE PNEL INTEGRL CINET TOP CLE ROUTING SYSTEM
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 KNOCK-OUT FOR PDU POWER CORD PERFORTED SINCLE HINGE SIDE PNEL INTEGRL CINET
More informationOptions Dedicated Bellows Dedicated Bellows For the supported models, see the table of options by model number on
Dedicted Bellows Dedicted Bellows For the supported s, see the tle of options y numer on. For the dedicted ellows dimensions, see to. Item nme chemtic digrm / mounting loction urpose/loction of use Dedicted
More informationCOUNTY TIMES Weekly ROCKLAND S OFFICIAL NEWSPAPER SINCE 1888 TM. Media Kit
ROCKLAND COUNTY TIMES Weekly ROCKLAND S OFFICIAL NEWSPAPER SINCE 1888 TM Medi Kit Medi Kit Aout Us... The Rocklnd County Times, pulished continuously since 1888, is pid distriution puliction ville vi miled
More informationInformation regarding
Informtion regrding LANCOM Advnced VPN Client 3.13 Copyright (c) 2002-2017 LANCOM Systems GmbH, Wuerselen (Germny) LANCOM Systems GmbH does not tke ny gurntee nd libility for softwre not developed, mnufctured
More informationNOTES. Figure 1 illustrates typical hardware component connections required when using the JCM ICB Asset Ticket Generator software application.
ICB Asset Ticket Genertor Opertor s Guide Septemer, 2016 Septemer, 2016 NOTES Opertor s Guide ICB Asset Ticket Genertor Softwre Instlltion nd Opertion This document contins informtion for downloding, instlling,
More informationEngineer-to-Engineer Note
Engineer-to-Engineer Note EE-245 Technicl notes on using Anlog Devices DSPs, processors nd development tools Contct our technicl support t dsp.support@nlog.com nd t dsptools.support@nlog.com Or visit our
More informationTHIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP. REAR PERFORATED SPLIT DOOR
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP FRONT SIDE PNEL KNOCK-OUTS FOR PDU POWER CORD SIDE PNEL RER PERFORTED. VISIT OUR
More informationSmall Business Networking
Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd business. Introducing technology
More informationDWR REVISIONS NOTICE: THE INFORMATION AND DESIGN CONTAINED HEREIN IS THE PROPERTY OF TRANSTECTOR SYSTEMS. WHO RESERVES ALL
THIS DRWING HS BEEN GENERTED ND IS MINTINED BY CD SYSTEM. CHNGES SHLL ONLY BE INCORPORTED S DIRECTED BY THE DESIGN CTIVITY. LTR DESCRIPTION REVISIONS ECO NUM. DTE PPROVED PRODUCTION RELESE DD34889 MLH
More informationEasyMP Network Projection Operation Guide
EsyMP Network Projection Opertion Guide Contents 2 Introduction to EsyMP Network Projection EsyMP Network Projection Fetures... 5 Disply Options... 6 Multi-Screen Disply Function... 6 Movie Sending Mode...
More informationMcAfee Network Security Platform
10/100/1000 Copper Active Fil-Open Bypss Kit Guide Revision E McAfee Network Security Pltform This document descries the contents nd how to instll the McAfee 10/100/1000 Copper Active Fil-Open Bypss Kit
More informationNET-ACCESS S TYPE CABINET 800mm WIDE X 1200mm DEEP FAMILY 12V305TM-DC KNOCK-OUTS FOR POU POWER CORD TOP CAP REAR SPLIT DOORS FRONT DOOR
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. DOOR SIDE PNEL TOP CP KNOCK-OUTS FOR POU POWER CORD SIDE PNEL RER SPLIT DOORS. VISIT OUR
More informationSmall Business Networking
Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology
More informationSEE SEPARATE PARTS LIST
THIS DOCUMENT ND THE INFORMTION CO NTINED THEREIN IS PROPRIETRY TO CRRIER CORPORTION ND SHLL NOT BE USED OR DISCLOSED TO OTHERS, IN WHOLE OR IN PRT, WITHOUT THE WRITTEN UTHORIZTION OF CRRIER COR PORTION.
More informationSmall Business Networking
Why network is n essentil productivity tool for ny smll business Effective technology is essentil for smll businesses looking to increse the productivity of their people nd processes. Introducing technology
More information