TKSTAR GPS TRACKER QUICK OPERATION GUIDE

Transcription

1 TKSTAR GPS TRACKER QUICK OPERATION GUIDE 1--About the SIM card - Please prepare a sim card,write down your SIM card number. - Only the Normal GSM SIM Card works.most sim cards 2G/3G/4G all support GSM in Europe. - If you have purchased a Nano or Micro SIM card, you will need to use a Normal SIM adapter. - It is imperative that the PIN code of the SIM card is removed beforehand (to be done with a mobile phone or the mobile service center) - Get APN information from card seller/operator,it should include APN name,apn user name,apn password.it may needed when you want to use the application. 2--Insert the sim card prepared into gps tracker. When you insert the SIM card to the device,blue and yellow indicator light will flash once every 3 seconds. or you call the SIM card,it answering busy or you heard it rings and then the call fails,that s mean the device has received the GPS signal,you can go on.. --If at this step,the trackers s light not showing as we said or when you call the sim card with tracker, it can t connected or straight turn to voic ,pls take out the card and plug into a phone to Cancel call forwarding,cancel pin code of the sim card.(to be done with a mobile phone or the mobile service center) 3--After done that,please reinsert the sim card into the tracker,using your phone to call the trackers again. If it works,you will receive location SMS with google maps link. If it can t reply location SMS,please kindly contact us by Tracking By SMS : Please send the following SMS command 1. Locate SMS command: g123456# 2. The command of set admin number : admin123456(espace)xxxxxxxxxx XXXXXXXXXX refers your mobile phone number,not the sim card inserted into the tracker, (Space) = Type an empty space, do NOT type (space). 3. The command of cancelling admin number : noadmin Set your mobile phone as admin number by sending the SMS command above. (The purpose of setting the admin number is that all of the SMS commands to configure tracking in the future can number and all of the alarm SMS will be sent to the admin number.) 4. Reset command: reset Vibration alarm Command: shock be sent only by the administrator

2 The command of cancelling the vibration alarm:noshock Pls keep the tracker being stationary for 5 minutes,it will takes five minutes to take effects. About this function: After parking the car for 5 minutes,if you restart the car,the shock sensor alarm will feel the vibration,then it will send a SMS alarm to the admin number. But if the car is rolling on the road, the device will always detect vibrations and no alarm will be generated.) 5--Set the power saving mode 1. Sleep by time mode setting: Command : sleep time The SMS command and phone call can wake up the tracker. After waking up, the tracker only works for 5 minutes and it will return to standby mode, the GPS is off, the GSM operates in low consumption mode. 2. Sleep by shock mode setting: Command: sleep shock The Vibration, SMS command and phone call can wake up the tracker. After waking up, the tracker only works for 5 minutes and it will return to standby mode, the GPS is off, the GSM operates in low consumption mode. 6--Tracking by APP: Please scan the QR code in the manual or the search tkstar gps from google play store /apple store to download the application TKSTAR GPS. 1. If you only have one tracker, please log in the application via IMEI number.(on the back of the tracker).the default password is If you have serveral trackers,you can contact us to request for creating an account to manage there trackers.and then,you can log in the apllication by username and password. After logging in the application,if there is TKSXXXX not enabled showed at the top of the main page(as last photos showing),you just need to set APN (please refer to point 8 for the details). 3. If you have problems in using the application, please contact us for assistance. APP Page

3 7--Tracking by Web Log in the webiste : (as the same way as logging in to the app) You can get the tracking information via this Website. The default password is , and it can be changed via this website. one account control more device : 8--How To Set APN 1-how to get apn information? (1).You can take out the SIM card from the tracker and insert it into your mobile phone,then you can go to setting page to find it. (2) Or You can contact the card seller/operator to consult about the APN informations.

4 2-The steps of setting APN: (1) Command:gprs Reply:gprs ok (2) Apn apn name Reply:apn ok (3) Apnuser username Reply:apnuser ok (4) Apnpasswd password Reply:apnpasswd ok All the red square in the above command represents a space. Please send a second command after receiving the reply of the first command. After you done that,pls restart the tracker by take out sim card reinsert it. Eg: For T-Mobile SIM card in Germany, the APN information is : APN name: internet.telekom APN user name: t-mobile APN password: tm The SMS commands are : gprs apn internet.telekom apnuser t-mobile Apnpasswd tm

5 9--Our Service: Please contact us by or whatsapp if there is any problem,we will reply you as soon as possible in 24 hours. address WhatsApp: The following is a video link on youtube for your reference: tk905- :