TECHNICAL BULLETIN FS-3040MFP/3140MFP

Transcription

1 TECHNICAL BULLETIN FS-3040MFP/3140MFP SUBJECT: BULLETIN INDEX 07/07/10 SUBJECT: BULLETIN # NEW MODEL PRODUCT INFORMATION...1

2 TABLE OF CONTENTS INTRODUCTION...1 GENERAL INFORMATION...1 DEALER LIMITED WARRANTY...2 MAINTENANCE KIT WARRANTY...3 WARRANTY RETURNS...3 PRODUCT TRAINING...4 SERVICE DOCUMENTATION...4 MAXIMUM MONTHLY VOLUME...5 ACCESSORY / OPTIONS...5 SUPPLY ITEMS, YIELDS & COST PER COPY...5 MAINTENANCE KIT YIELDS & COST PER COPY...6 MAINTENANCE KITS CONTENTS...6 BOARD REPAIR INFORMATION...7 FS-3040MFP FIRMWARE INFORMATION...8 FS-3140MFP FIRMWARE INFORMATION...8 MEMORY SPECIFICATIONS AND REFERENCE...8 MEMORY TYPE...8 FS-3040MFP/3140MFP SPECIFICATIONS...9 SPECIFICATIONS (continued)...10 BTU S...13 POWER CONSUMPTION...13 INSTALLATION REQUIREMENTS...14 WEIGHT AND DIMENSIONS...14 MACHINE SPACE REQUIREMENTS...15 UTILITIES...16 PRINT DRIVERS...16 PRODUCT CONFIGURATION...17

3 energy compliant RECOMMENDED ACTION FOR FIELD MACHINES AT SETUP NEXT PM NEXT SERVICE CALL INFORMATION ONLY TECHNICAL BULLETIN FS-3040MFP/3140MFP Bulletin # FS-3040MFP/3140MFP-01 Subject Model FS-3040MFP/3140MFP Date 07/07/10 NEW MODEL PRODUCT INFORMATION This technical publication is confidential information that is the property of Kyocera Mita America, Inc. It is solely for the use of Kyocera Mita s authorized dealers. This information may not be published, reproduced, sold, or copied in any media. Its unauthorized use is prohibited. Copyright 2010 by Kyocera Mita America, Inc. All rights reserved. INTRODUCTION Technical Services is pleased to announce the launch of the FS-3040MFP/3140MFP. Kyocera is offering two Models in this series, the FS-3040MFP with standard Document Processor and the FS-3140MFP with Standard Document Processor and Fax System. Each offers High Speed Printing, Standard Duplex and a USB Interface on the front of the MFP for easy data management. Key Features are as follows: FS-3040MFP/DP Standard 50 sheet Document Feeder FS-3140MFP Standard 50 sheet Document Feeder Standard Fax System 42 PPM Simplex/ 26 PPM Duplex (LetterR) Standard Print Controller: PowerPC 440, 667MHz 256MB Standard DDR2 SDRAM Built-in, max 768MB Standard Duplex GENERAL INFORMATION Product Name FS-3040MFP/3140MFP Product Code 2LW/2LX Product Training Learning Center on KMAconnect Diagnostic Center Contact Number Software Solution Group software_solution@kyoceramita.com KMAconnect Web Site kmaconnect.com KMAconnect Help Desk dealersupport@kyoceramita.com Kyocera Mita Web Site kyoceramita.com Kyocera Technical Support ( ) support@kyoceramita.com Material Safety Data Sheet Posted on KMAconnect National Processing Center(Customer Service) or customer_service@kyoceramita.com National Training Center training@kyoceramita.com

4 Page 2 DEALER LIMITED WARRANTY FOR MULTIFUNCTIONAL PRODUCTS AND PRINTERS Kyocera Mita America, Inc. ( Kyocera ) warrants to its Authorized Dealers that its new Multifunctional Products/ Printers (both referred to herein as MFP/Printers ) will be free from defects in workmanship and material under normal use and service for a period of 12 months from installation with first end-user, or 15 months from Kyocera s invoice date to Dealer, or the specified number of copies/prints as listed below, whichever is earlier. Kyocera obligation hereunder is expressly limited to providing Dealer with the parts required to repair the MFP/Printer or crediting Dealer's account for the cost of said parts, at Kyocera's election. Maintenance Kits, lamps, exterior covers, consumable parts, and all labor costs, are specifically excluded from this warranty. This warranty does not cover MFP/Printers, which: (a) have become damaged due to operator negligence, misuse, accidents, improper storage or unusual physical or electrical stress, (b) have used parts or supplies which are not genuine Kyocera brand parts or supplies, (c) have been installed or serviced by a technician not employed by Kyocera or an Authorized Kyocera Dealer, (d) have had the serial number modified, altered, or removed, or (e) Dealer fails to register the installation information for the MFP/Printer with Kyocera utilizing KMAconnect. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHICH MAY ARISE OUT OF THE USE OF, OR INABILITY TO USE, THE MFP/PRINTER. MFP MODEL TOTALCOPIES/PRINTS ORIGINAL MAINTENANCE KIT COPY ALLOWANCE FS-3040MFP 300, ,000 FS-3140MFP 300, ,000

5 Page 3 MAINTENANCE KIT WARRANTY Kyocera Mita America, Inc. and Kyocera Mita Canada Ltd. (both referred to as Kyocera ) warrant the new maintenance kit against any defects in material and workmanship for a period of three (3) years or the defined number of prints listed on the next page, whichever occurs first, from the date of installation. In the event any unit of the maintenance kit is found to be defective within the warranty period, Kyocera s only obligation and the exclusive remedy shall be the exchange or repair, at Kyocera s option, of the unit. The warranty period for any replaced maintenance kit unit will expire at the end of the original warranty period. It is understood that Kyocera shall have no obligation to furnish labor. This warranty is valid only for the original retail customer (the Customer ) of a new maintenance kit in the United States of America or Canada, based upon the country of purchase. To activate the warranty on a replacement maintenance kit, the replacement must be registered by an Authorized Dealer within 30 calendar days or 10% of the maintenance kit life, whichever comes first, from the expiration of the previous maintenance kit's warranty. To obtain performance of this warranty, the Customer must return the defective maintenance kit unit in the original carton with proof of purchase (with date of purchase) together with a complete explanation of the problem to an Authorized Kyocera Service Facility in the United States or Canada, based upon the country of purchase. Any shipping charges must be prepaid by the Customer. This warranty does not cover maintenance kits, which: (a) have become damaged due to operator negligence, misuse, accidents, improper storage, or unusual physical or electrical stress, (b) have used parts and supplies which are not genuine Kyocera brand parts or supplies, (c) do not work properly because of failure to follow operating, storage or maintenance instructions, (d) have been installed or serviced by a technician not employed by Kyocera, or an Authorized Servicing Facility, or (e) have had the serial number modified, altered or removed. If the Dealer from whom the Customer purchased the printer is not an Authorized Kyocera Service Facility, the Customer may obtain the name and address of an Authorized Kyocera Service Facility by writing to Kyocera at the address below or on the web at for Kyocera Mita America, Inc. or for Kyocera Mita Canada. This warranty gives the Customer specific legal rights. The Customer may also have other rights that vary from state to state, or province to province. Neither the seller, nor any other person, is authorized to extend the time period or expand this warranty on behalf of Kyocera. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, AND KYOCERA SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SHALL NOT EXTEND TO, AND KYOCERA SHALL NOT BE LIABLE FOR, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT MAY ARISE OUT OF THE USE OF, OR INABILITY TO USE, THE MAINTENANCE KIT WARRANTY RETURNS Technical Services has implemented a more efficient Warranty Return Process so your Warranty Claim can be verified and processed in the least amount of time. To process your Warranty Claim and verify other key information, both the Status Page (one page) and the Service Status Page (two pages) must be included with the returned item. If both of these are not included with a Warranty Claim, credit will be declined. Refer to the Service Mode, Page , Section of the Service Manual for instructions on printing these reports.

6 Page 4 PRODUCT TRAINING Product Training Prerequisites Learning Center on KMAconnect None Product Training is offered as a Full FS-3040MFP/3140MFP On-Line Training Course available at the Learning Center on KMAconnect. To participate in the On-line Training, a FS-3040MFPor FS-3140MFP is required. The Dealership can place its first order for the training equipment prior to authorization, but additional equipment purchases require that at least one Technician has completed the On-Line Training Course with an overall score of 80% or higher. SERVICE DOCUMENTATION Description FS-3040MFP/3140MFP Service Manual FS-3040MFP/3140MFP Parts List FS-3040MFP/3140MFP Operation Guide FS-3140MFP Fax Operation Guide FS-3040MFP/3140MFP Safety Guide FS-3040MFP/3140MFP Quick Installation Guide FS-3140MFP Network Fax Driver Operation Guide FS-3040MFP/3140MFP Printer Driver User Guide Rev Kyocera Command Center Operation Guide Rev. 5.32w KM-NET Viewer Operation Guide Rev PRESCRIBE Technical Reference Manual - Rev. 4.7 PRESCRIBE Command Reference Manual Rev 4.8 KM-NET Admin Operation Guide Rev-2.0 KM-NET for Direct Printing Operation Guide Rev-3.2 Availability Included in the Box & Available on KMAconnect Included in the Box & Available on KMAconnect A Printed Copy of the Operation Guide will no longer be included in the Box with the MFP. The Operation Guide is available as a PDF file on the Document Library CD, included with each MFP or Printer. In the event the CD is misplaced or lost, please inform your customer that all documentation on the CD, related to this product, can be downloaded from kyoceramita.com.

7 Page 5 MAXIMUM MONTHLY VOLUME FS-3040MFP FS-3140MFP 200,000 pages 200,000 pages ACCESSORY / OPTIONS ITEM Part Number Description PF H36US0 500 sheet Paper Feeder (Maximum Three) SD (A) 855D pin DDR2 SDRAM Printer Memory (512MB) Waste Bottle 302F Waste Toner Bottle Ass y SUPPLY ITEMS, YIELDS & COST PER COPY Description Part Number New Cartridge Starter Cartridge Price CPC Yield / 1SO19752 Yield/ISO19752 Toner TK-352 FS-3040MFP/3140MFP/ FS-3920DN 1T02LX0US0 15,000 Images 7,500 Images $ The TK-352 with item number 1T02J10US0 (FS-3920DN) is not compatible with the FS- 3040MFP/3140MFP. If installed, it will block the release lever and not allow the cartridge to be removed when empty. Be sure to use TK-352 with item number 1T02LX0US0 with the FS-3040MFP/3140MFP. This cartridge is also backwards compatible with the FS-3920DN.

8 MAINTENANCE KIT YIELDS & COST PER COPY FS-3040MFP/3140MFP-01 Page 6 Description Part Number Yield Price CPC MK- 350 Maintenance Kit for 1702LX7US0 300,000 $ FS-3040MFP/3140MFP/FS-3920DN MK-370 for DP 1702LX0UN0 150,000 $ MAINTENANCE KITS CONTENTS MK-350 Description Part Number Quantity Retard Roller Ass y 302F Feed Holder Ass y 302F DC Brush Ass y 302F Roller Transfer Ass y SP 302F FK J DV-352 (U) B 302LW DK J The MK-350 (FS-3920DN) with item number 1702J17US0 is not compatible with the FS- 3040MFP/3140MFP. Be sure to use MK-350 with new item number 1702LX7US0 with the FS-3040MFP/3140MFP/ FS-3920DN. MK-370 for DP Description Part Number Quantity Feeding Unit Separation Pad 1702LX0UN0 One of each The life of the DP Maintenance items are based on DP feed counts, not total main body maintenance counts. The DP count can be viewed on the Service Status Page and is not resettable. Contents and Item Numbers are subject to change without notice

9 Page 7 BOARD REPAIR INFORMATION PCB NAME REPAIR PCB NEW PCB P/N REPAIR PCB P/N PRICE * PARTS SWITCHING REGULATOR (U) SP 302LW RB00181 $53.69 PARTS MAIN PWB ASSY SP 302LW RB00182 $ (FS-3040MFP) PARTS MAIN PWB ASSY SP 302LX RB00183 $ (FS-3140MFP) PARTS ENGINE PWB ASSY SP 302LW RB00184 $76.27 PARTS OPERATION UNIT SP (FS-3040MFP) 302LW RB00185 $66.93 PARTS OPERATION UNIT SP (FS-3140MFP) 302LX RB00186 $67.12 * Repair PCB Price includes credit issued after return of old Board. Defective PCB s being returned within the 1-Year warranty period must be returned to the National Return Center utilizing the Parts Warranty Registration & Return System on KMAconnect. Print out the Return Authorization form obtained through the system and return it with the Circuit Board for Credit. Any associated mounting brackets, hardware, system software and original packaging must be included with the claim. Credit will then be issued to your account. For defective PCB s out of warranty, a Repair PCB must be ordered from the Parts Distribution Center. The dealer will be charged 100% of the New PCB price. The defective PCB can be returned using the Online Repair Board Core Form within 30 days of the Repair PCB invoice date. Upon receipt of the defective PCB at the National Return Center, the dealer will be credited 55% of the New PCB price. If a New PCB is ordered instead of a Repair PCB, credit will not be issued for the returned defective PCB. All Part Numbers and Pricing subject to change without notice.

10 Page 8 FS-3040MFP FIRMWARE INFORMATION Firmware Version Upgrade Method Availability MAIN 2LW_2F USB ENGINE 2LW_ SCANNER 2LW_ Language BR 2LW_81BR FS-3140MFP FIRMWARE INFORMATION Firmware Version Upgrade Method Availability MAIN 2LX_2F USB ENGINE 2LW_ SCANNER 2LW_ FAX 2H9_ Language BR 2LW_81BR The FS-3040MFP/3140MFP is standard-equipped with 256MB of Built-in Memory. They can be upgraded to a maximum of 768MB by adding one 512MB DIMM in the empty Slot. MEMORY SPECIFICATIONS AND REFERENCE Model Standard Maximum Copy/Print/Scan(Shared) 256MB Built in 256MB + 512MB = 768MB MEMORY TYPE Item Specification Type & Number of Pins 144 pin DDR2 SDRAM DIMM Optional Memory is also available from Buffalo Technology at (

11 Type Printing method Originals Original feed system Paper weight Cassette MP tray Paper type Cassette MP tray FS-3040MFP/3140MFP SPECIFICATIONS FS-3040MFP/3140MFP-01 Page 9 Desktop Electrophotography by semiconductor laser, single drum system Sheet, Book, 3-dimensional objects (maximum original size: Folio/Legal) Contact glass: fixed 60 to 120 g/m2 16~32lb. (Duplex: 60 to 120 g/m2) 16~32lb. 60 to 220 g/m2, 16~58lb. 120lb. Index Plain, Recycled, Preprinted, Bond, Color, Prepunched, Letterhead, High Quality, Custom 1 to 8 (Duplex: Same as simplex) Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color, Prepunched, Letterhead, Thick, Envelope, High Quality, Custom 1 to 8 Paper size Cassette A4, B5, A5, A6, Legal, Letter, Statement, Executive, Oficio II, Folio, 16K, Custom MP tray A4, B5, B5(ISO), A5, A6, B6, Envelope #10, Envelope #9, Envelope #6, Envelope Monarch, Envelope DL, Envelope C5, Hagaki, Oufuku Hagaki, Youkei 2, Youkei 4, Legal, Letter, Statement, Executive, Oficio II, Folio, 16K, Custom Magnification ratios Copying speed First copy time (A4, feed from cassette) Warm-up time (22 C 60%RH) Paper capacity Cassette MP tray Output tray capacity Continuous printing Scanning system Photoconductor Image write system Manual mode: %, 1% increments Auto mode: 400%, 200%, 141%, 129%, 115%, 90%, 86%, 78%, 70%, 64%, 50%, 25% Simplex A4R : 40 ppm LetterR : 42 ppm Legal : 33 ppm B5R : 33 ppm A5R/A6R : 22 ppm Duplex A4R : 24.5 ppm LetterR : 26 ppm Legal : 16.5 ppm B5R : 24 ppm A5R : 21 ppm 7.0 second or less Power on: 22 second or less Recovery from the low power mode: 10 second or less Recovery from the sleep mode: 15 second or less 500 sheets (80g/m2), 20lb. 100 sheets (80 g/m2, 20lb. plain paper, Letter/A4 or smaller) 500 sheets (80g/m2), 20lb. 1 to 999 sheets Flat bed scanning by CCD image sensor a-si drum (diameter 30 mm) Semiconductor laser (1 beam)

12 Page 10 SPECIFICATIONS (continued) Charging system Developing system Transfer system Separation system Cleaning system Charge erasing system Fusing system Contact charger roller method (positive charging) Mono component dry developing method Toner replenishing: Automatic from the toner container Transfer roller (negative-charged) Small diameter separation, discharger brush (negative-charged) Counter blade cleaning + cleaning roller Exposure by eraser lamp (LED) Heat roller system Heat source: halogen heater Abnormally high temperature protection devices: thermostats PowerPC440 (667MHz) 256MB 768MB CPU Memory Standard Maximum Interface USB: 1 port (Hi-speed USB 2.0) USB host: 1 port Ethernet: 1 port (10BASE-T/100BASE-TX) dpi Resolution Operating environment Temperature 0 to 32.5 C/50 to 90.5 F Humidity 15 to 80% Altitude 2,500 m/8,202 ft maximum Brightness 1,500 lux maximum Dimensions (W D H) 19 7/ / /2 Weight 3in1 model (without FAX): Approx lbs 4in1 model (with FAX): Approx lbs Floor requirements (W D) Without MP tray: 19 7/ /16 Power source Options With MP tray: 19 7/ / V AC, 60 Hz, more than 8.0 A Paper feeder 3, Expanded memory

13 Page 11 Document processor functions Original feed method Supported original types Original sizes Original weights Loading capacity Dimensions Weight Automatic feed Sheet originals Maximum: Legal/A4 Minimum: Statement/A5 Simplex: 50 to 120 g/m2, 13~32lb. Duplex: 50 to 110 g/m2, 13~28lb. 50 sheets (50 to 80 g/m2) 13~ 20lb. maximum 19 5/16 (W) 13 5/16 (D) 4 1/8 (H) 6.6 lbs. or less Printing functions Printing speed First print time (A4, feed from cassette) Resolution Compatible operation system Same as copying speed. 9.5 seconds or less Fine 1200, Fast 1200, 600 dpi, 300 dpi Windows 2000, Windows XP, Windows XP Professional, Windows Server 2003, Windows Server 2003 x64 Edition, Windows Vista x86 Edition, Windows Vista x64 Edition, Windows 2008 Server, Windows Server 2008 x64 Edition, Windows 7, Apple Macintosh OS 10.x Interface USB: 1 port (Hi-speed USB 2.0) USB host: 1 port Page description language Ethernet: 1 port (10BASE-T/100BASE-TX) PRESCRIBE Scanning functions Compatible operation system System requirements Resolution File format Scanning speed Interface Network protocol Transmission system Windows 2000 (Service Pack 4), Windows XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7 IBM PC/AT compatible CPU: Celeron 600MHz or higher RAM: 128MBor more HDD free space: 20MB or more Interface: USB 600 dpi, 400 dpi, 300 dpi, 200 dpi JPEG, TIFF, PDF, XPS 1-sided: B/W 35 images/min Color 13 images/min (A4 landscape, 600 dpi, Image quality: Text/Photo original) Ethernet (10 BASE-T/100 BASE-TX) USB2.0 (Hi-Speed USB) TCP/IP PC transmission SMB Scan to SMB FTP Scan to FTP, FTP over SSL transmission SNMP Scan to TWAIN scan WIA scan

14 Page 12 Fax Functions Compatibility Super G3 Communication line Subscriber telephone line Transmission time 3 seconds or less (33600 bps, JBIG, ITU-T A4 #1 chart) Transmission speed 33600/31200/28800/26400/24000/21600/19200/16800/14400/12000/9600/ 7200/4800/2400 bps Coding scheme JBIG/MMR/MR/MH Error correction ECM Original size Max. width: 8 1/2"/215 mm Max. length: 14"/355.6 mm Automatic document feed Max. 50 sheets Scanner resolution Horizontal Vertical dpi Normal (8 dot/mm 3.85 line/mm) dpi Fine (8 dot/mm 7.7 line/mm) dpi Super fine (8 dot/mm 15.4 line/mm) dpi Ultra fine (16 dot/mm 15.4 line/mm) Printing resolution dpi Gradations 256 shades (Error diffusion) One-Touch key 22 keys Multi-Station transmission Max. 100 destinations Substitute memory reception 256 sheets or more (when using ITU-T A4 #1) Image memory capacity 3.5 MB (standard) (for incoming faxed originals) Report output Sent result report, FAX RX result report, Activity report, Status page Specifications subject to change without notice.

15 Page 13 Model BTU s Power Consumption PPM Prints/Hr Total Total Print Ready (W) (W) Watts based on PPM & Pr/Hr Print Watts based on PPM & Pr/Hr kw/hour Total BTU Ready (* ) FS-3040MFP , , FS-3140MFP , , * Total BTU s are based on Prints per Minute, Prints per Hour. Watts are based on PPM & Pr/Hr and Kw/Hour. Specification POWER CONSUMPTION Main Body Voltage requirements US/Canada 120 V AC ±10%, 60Hz ±2%, 9.5A Maximum 1032W FS-3040MFP Copying/Printing Mode 679.9W Standard Configuration Ready Mode 94.5W Plug-in Mode 0.1W Sleep Mode 6.8W Low Power Mode 34W FS-3140MFP Maximum 1032W Standard Configuration Copying/Printing Mode 680.9W Ready Mode 104.6W Plug-in Mode 0.1W Low Power Mode 42.8W Sleep Mode 10.4W Maximum current US/Canada 9.5A NEMA 5-15R

16 Page 14 INSTALLATION REQUIREMENTS Installation Time Temperature Range Humidity Range Condensation and Humidity Altitude Illumination Levelness 20 Minutes or less 50 F ~ 90 F (10 C ~ 32.5 C) 15% ~ 85%RH Rapid Temperature change, Humidity drift, and condensation should be avoided Maximum 6500 ft. (2500meters) Maximum 1,500 lux Maximum levelness: 5mm (0.2inch) The MFP must be placed on a level and sturdy surface WEIGHT AND DIMENSIONS Specification FS-3040MFP FS-3140MFP Width 19 7/ /16 Height 21 1/2 21 1/2 Depth 19 9/ /16 Weight (Main unit) 56.2lbs. 56.9lbs..

17 Page 15 MACHINE SPACE REQUIREMENTS Machine front: 1000 mm/39 3/8" Machine rear: 300 mm/11 13/16 Machine right: 300 mm/11 13/16" Machine left: 300 mm/11 13/16" *All Specifications Subject to Change without Notice.

18 Page 16 UTILITIES NETWORK KM-NET for Accounting KM-NET Admin KM-NET Viewer PRINT KM-NET for Direct Printing Description Remotely manages user account codes for Kyocera Devices. Tracks Print, Copy, Scan and Fax counts by User Account. KMnet Admin is Kyocera's unified device management solution that uses a web-based platform to give network administrators easy and uncomplicated control of all network enabled printing devices. KMnet Admin is web-based, client software installation is not necessary. Administrator Utility which monitors Kyocera network devices with the ability to display and report device conditions via using SMTP. Allows Direct Printing of Adobe PDF s without launching Adobe s Acrobat or Acrobat Reader applications. PRINT DRIVERS Print Drivers can be downloaded from KMAconnect and kyoceramita.com. Note: Drivers and Descriptions are periodically updated and versions posted in the future may not match this chart. Description Version Operating System FS-3040MFP/3140MFP KX Print Driver for Windows 2003, Vista, 2008, Windows 7 Win 2003, Vista, 2008, Windows 7 (64 Bit) FS-3040MFP/3140MFP KX Print Driver for Win 2K, XP, 2003, Vista, 2008, Windows 7 (32 Bit) Windows 2K, XP, 2003, Vista, 2008, Windows 7 FS-3040MFP/3140MFP KX XPS Print Driver Windows Vista, 2008, Windows for Win Vista, 2008, Windows 7 (32 Bit) FS-3040MFP/3140MFP KX XPS Print Driver Windows Vista, 2008, Windows for Win Vista, 2008, Windows 7 (64 Bit) FS-3040MFP/3140MFP KPDL Uni Driver ver. 8.4 for 8.4 Windows 2000, XP, 2003 Windows 2000, XP, 2003 FS-3040MFP/3140MFP KX Driver ver. 8.4 for Win 8.4 Windows Vista, 2008, Windows 7 Vista, 2008, Windows 7 FS-3040MFP/3140MFP NDPS Driver ver a b Windows 9x, ME Win 9x, ME FS-3040MFP/3140MFP NDPS Driver ver a Windows 2000, NT Win 2000, NT FS-3040MFP/3140MFP NDPS Driver ver a Windows 2000, XP Win 2000, XP FS-3040MFP/3140MFP OSX 10.2 and 10.3 Installer 8.4 OSX 10.2 & 10.3 FS-3040MFP/3140MFP OSX 10.4 Installer 8.4 OSX 10.4 FS-3040MFP/3140MFP OSX 10.5 & 10.6 Installer 8.4 OSX 10.5 & 10.6 FS-3040MFP/3140MFP PCL Mini Driver ver. 1.0 for 1.0 Windows Vista, 2008, Windows 7 Win Vista, 2008, Windows 7 FS-3040MFP/3140MFP PCL Mini Driver ver. 4.0 for 4.0 Windows 2000, XP, 2003 Win 2000, XP, 2003 FS-3040MFP/3140MFP TWAIN Source Driver TWAIN Source Driver FS-3040MFP/3140MFP WIA Source Driver V WIA Source Driver FS-3040MFP/3140MFP XPS Mini Driver ver. 1.0 for 1.0 Windows Vista, 2008, Windows 7 Win Vista, 2008, Windows 7 FS-3140MFP Network Fax Driver (32bit) Windows 2000, XP, 2003, Vista, 2008, Windows 7 FS-3140MFP Network Fax Driver (64bit) Windows 2003, Vista, 2008, Windows 7

19 Page 17 PRODUCT CONFIGURATION One 512MB DIMM can be added Up to (3) PF-310 s can be added The Document Processor is Standard on the FS-3040MFP and FS-3140MFP.