CERTIFICATE OF COMPLIANCE

Transcription

1 Certificate Number E Report Reference E Issue Date 2017-OCTOBER-30 Issued to:, OSKALOOSA IA This is to certify that representative samples of COMPONENT - RECEPTACLES FOR PLUGS AND ATTACHMENT PLUGS See Addendum. Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL , Appliances Couplers for Household and Similar General Purposes CSA C22.2 No , Appliances Couplers for Household and Similar General Purposes See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. The UL Recognized Component Mark generally consists of the manufacturer s identification and catalog number, model number or other product designation as specified under Marking for the particular Recognition as published in the appropriate UL Directory. As a supplementary means of identifying products that have been produced under UL s Component Recognition Program, UL s Recognized Component Mark:, may be used in conjunction with the required Recognized Marks. The Recognized Component Mark is required when specified in the UL Directory preceding the recognitions or under Markings for the individual recognitions. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Certification Mark on the product. Page 1 of 2

2 Certificate Number E Report Reference E Issue Date 2017-OCTOBER-30 This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements. Appliance Outlet, Cat Nos , , and Page 2 of 2

3 Certificate Number E Report Reference E Issue Date 2015-SEPTEMBER-17 Issued to: OSKALOOSA IA This is to certify that representative samples of COMPONENT - RECEPTACLES FOR PLUGS AND ATTACHMENT PLUGS Cat. Nos. 8821XXXX, 8822XXXX, 8823XXXX, 8826XXXX, 8827XXXX, 8828XXXX, 8829XXXX, 8824XXXX, 8825XXXX. Have been investigated by UL in accordance with the Standard(s) indicated on this Certificate. Standard(s) for Safety: Additional Information: UL 498, Attachment Plugs and Receptacles. C22.2 No , General use receptacles, attachment plugs, and similar wiring devices. See the UL Online Certifications Directory at for additional information Only those products bearing the UL Certification Mark should be considered as being covered by UL's Certification and Follow-Up Service. Recognized components are incomplete in certain constructional features or restricted in performance capabilities and are intended for use as components of complete equipment submitted for investigation rather than for direct separate installation in the field. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to. Look for the UL Certification Mark on the product.

4 RTRT8.E Receptacles for Plugs and Attachment Plugs Certified for Canada - Co... RTRT8.E Receptacles for Plugs and Attachment Plugs Certified for Canada - Component Page Bottom Receptacles for Plugs and Attachment Plugs Certified for Canada - Component See General Information for Receptacles for Plugs and Attachment Plugs Certified for Canada - Component OSKALOOSA, IA USA E Appliance outlet Model(s) , , , Receptacles "83030 Series" Model(s) 83030, followed by 6 or 7, followed by 00, 10, 20, 30, 40, 50, 60, 70, 80, 90. Receptacles Model(s) , , , , 8821XXXX, 8822XXXX, 8823XXXX, 8824XXXX, 8825XXXX, 8826XXXX, 8827XXXX, 8828XXXX, 8829XXXX Marking: Company name or trademark,, model designation and the Recognized Component Mark for Canada,. Last Updated on Questions? Print this page Terms of Use Page Top 2017 The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a nonmisleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2017 ". 11/7/2017

5 RTRT2.E Receptacles for Plugs and Attachment Plugs - Component RTRT2.E Receptacles for Plugs and Attachment Plugs - Component Page Bottom Receptacles for Plugs and Attachment Plugs - Component See General Information for Receptacles for Plugs and Attachment Plugs - Component OSKALOOSA, IA USA E Appliance outlet Model(s) , , , Receptacles "83030 Series" Model(s) 83030, followed by 6 or 7, followed by 00, 10, 20, 30, 40, 50, 60, 70, 80, 90. Receptacles Model(s) , , , , 8821XXXX, 8822XXXX, 8823XXXX, 8824XXXX, 8825XXXX, 8826XXXX, 8827XXXX, 8828XXXX, 8829XXXX Marking: Company name or trademark, and model designation. Last Updated on Questions? Print this page Terms of Use Page Top 2017 The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a nonmisleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from UL" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: " 2017 ". 11/7/2017