SUREPORT TM Transceivers for Cisco Platforms

Transcription

1 SUREPORT TM Transceivers for Cisco Platforms Dual SFP Dual SFP+ Single SFP Single SFP+ QSFP+ Dual XFP Single XFP CWDM SFP CWDM SFP+ DWDM SFP DWDM SFP+ CWDM XFP DWDM XFP Copper (RJ-45) SFP Dual X2 CWDM X2 DWDM X2 Dual Xenpak CWDM Xenpak DWDM Xenpak Dual GBIC Copper (RJ-45) GBIC SFP+ Direct Attach Cables Champion Optical Network Engineering, LLC. All rights reserved.

2 Key Features and Benefits SUREPORT TM For the superior convenience and ease of use of one-to-one platform compatibility, look no further than Champion ONE s Sureport TM line of optical transceivers. These carrier-grade transceivers are designed and tested to fit seamlessly with your Cisco platform. Dual Champion ONE offers dual-fiber transceivers in a variety of form factors, distances, data rates, and protocols. The SFP and XFP support SONET, Ethernet, and Fibre. The dual-fiber SFP+ and XENPAK support. Our dual-fiber X2 supports as well as 10G Fibre. The GBIC supports 1G Fibre. The QSFP+ supports 40G Ethernet. These are all available in a variety of distance options, from SR (30 meters) to ZR (80km). Single Champion ONE s SF SFP or bi-directional (bidi) offers a direct replacement for dual-fiber SFP, SFP+, and XFP optics, providing you with more bandwidth on less fiber. Single-fiber optics support full-duplex transmission across only one strand of fiber. Gaining increased capacity without running new fiber can reduce your fiber installation or lease costs, optimizing your fiber plant. WDM Champion ONE offers both coarse and dense wave division multiplexing (CWDM and DWDM) transceivers for increased flexibility in your network design. WDM solutions conserve fiber in standard switches and routers, eliminating the need for a separate optical transport device. Our CWDM transceivers are typically available in 8 standard CWDM, ranging from 1470 to 1610 nm, in 20nm spacings. Lower CWDM wavelengths (1450nm and below) are available upon request. The single-rate 1Gb version is rated for 80km. CWDM transceivers are available in SFP, SFP+, X2, XENPAK, and XFP form factors. The DWDM transceivers are available in SFP, SFP+, X2, and XENPAK, and XFP form factors, are rated at 80km, and support a wide variety of protocols. They are available in 40 standard DWDM channels (channels 20-61[ nm]) in both 50GHz and 100Hz spacings, and can be tuned with Champion ONE s utune Director. Copper Champion ONE offers both SFP and GBIC transceivers that support 10/100/1000GBase Ethernet links over copper UTP category 5 cables. Our technical staff is here to assist in selecting the correct copper transceiver for specific applications. Custom All listed Sureport parts are intended to be one-to-one replacements. Need a higher data rate (up to 100G) or longer distance (up to 120km)? Contact a Champion ONE sales representative to discuss a custom programmed transceiver. We will work with you to find a solution to satisfy your network requirement. Cables Champion ONE DACs for Cisco support 10GBASE Ethernet standards in 1, 3, 5, and 7 meter lengths. These passive SFP+ copper cables provide an affordable low-power alternative to optical SFP+ transceivers and are a perfect fit for datacenter applications, e.g., simplified intra- and inter-rack configurations. All cables come complete with durable polymer pull tabs to allow for easy removal. These carrier-grade cables are used in tier-1 service providers, data centers, hospitals, universities, and enterprises across North America. All Champion ONE transceivers specify the same (or enhanced) optical parameters as your Cisco switch and router, adhere to the MSAs (multi-source agreements) for their respective form factors, and are covered by a 5-year warranty. All Champion ONE fiber transceivers feature digital diagnostics, also known as digital optical monitoring (DOM), which Cisco platforms support Champion Optical Network Engineering, LLC. All rights reserved.

3 DUAL FIBER SFP sss SFP MSA (multi-source agreement) IEEE Std Fibre Draft Physical Interface Specification Compliant with SONET/SDH optical standards Fast Ethernet (125Mbps) Gigabit Ethernet (1.25Gbps) SONET OC-3/OC-12/OC-48 Fibre (1G, 2G, 4G) * ( C) Gigabit Ethernet (1.25 Gbps), 1G Fibre ( Gbps) GESFP-SX(I)-CSC 850 MMF 0.55 GESFP-LX(I)-CSC 1310 SMF 20 0 to 70 (-40 to 85) 0 to 70 (-40 to 85) SFP 1000Base-SX 550m, (I-temp), Cisco Systems compatible -9.0 / / 0.0 SFP 1000Base-LX 10km, (i-temp), Cisco Systems compatible -9.0 / / 0.0 GLC-SX-MM GLC-SX-MMD SFP-GE-S (GLC-SX-MM-RGD) SFP-GE-L GLC-LH-SM GLC-LH-SMD (GLC-LX-SM-RGD) GESFP-EX-CSC 1310 SMF 40 0 to 70 SFP 1000Base-EX 40km, Cisco Systems compatible -5.0 / / 0.0 GLC-EX-SMD GESFP-ZX(I)-CSC 1550 SMF 80 0 to 70 (-40 to 85) SFP 1000Base-ZX 80km, (i-temp), Cisco Systems compatible 0.0 / / 0.0 GLC-ZX-SM SFP-GE-Z (GLC-ZX-SM-RGD) DUAL FIBER SFP+ IEEE Std 802.3ae, 802.3aq (10Gbase-LRM) SFP+ MSA (multi-source agreement) Dual SFP+ 10GESFPP-SR-CSC 850 MMF.03 0 to 70 SFP+ 10GBASE-SR 30m, Cisco Systems compatible -7.3 / / -1.0 Cisco part #s SFP-10G-SR SFP-10G-SR-X 10GESFPP-LRM-CSC 1310 MMF.22 0 to 70 SFP+ 10GBASE-LRM 220m, Cisco Systems compatible -6.5 / / 0.5 SFP-10G-LRM 10GESFPP-LR-CSC 1310 SMF 10 0 to 70 SFP+ 10GBASE-LR 10km, Cisco Systems compatible -8.2 to / 0.5 SFP-10G-LR SFP-10G-LR-X 10GESFPP-ER-CSC 1550 SMF 40 0 to 70 SFP+ 10GBASE-ER 40km, Cisco Systems compatible -4.7 to / -1.0 SFP-10G-ER 10GESFPP-ZR-CSC 1550 SMF 80 0 to 70 SFP+ 10GBASE-ZR 80km, Cisco Systems compatible 0 to / -7.0 SFP-10G-ZR Champion Optical Network Engineering, LLC. All rights reserved.

4 SINGLE FIBER SFP SFP MSA (mutli-source agreement) IEEE Std Fibre Draft Physical Interface Specification Compliant with SONET/SDH optical standards Gigabit Ethernet (1.25Gbps) Simplex SC connector Sureport Part # ( C) Gigabit Ethernet (1.25 Gbps), 1G Fibre ( Gbps) GESFP-B31-20-CSC 1310/1490 SMF 20 0 to 70 SFP SF 1000Base-BX 1310/1490, 20km, Cisco Systems compatible -7 / 1-22 / 0 GLC-BX-U GESFP-B49-20-CSC 1490/1310 SMF 20 0 to 70 SFP SF 1000Base-BX 1490/ km, Cisco Systems compatible -7 / 1-22 / 0 GLC-BX-D GESFP-B35-40-CSC 1310/1550 SMF 40 0 to 70 SFP SF 1000Base-BX 1310/1550, 40km,Cisco Systems compatible -5 / 0-22 / 0 ***C1 Exclusive*** GESFP-B53-40-CSC 1550/1310 SMF 40 0 to 70 SFP SF 1000Base-BX 1550/1310, 40km, Cisco Systems compatible -5 / 0-22 / 0 ***C1 Exclusive*** GESFP-B45-80-CSC 1490/1550 SMF 80 0 to 70 SFP SF 1000Base-BX 1490/1550, 80km, Cisco Systems compatible 0 / 5-26 / -3 ***C1 Exclusive*** GESFP-B54-80-CSC 1550/1490 SMF 80 0 to 70 SFP SF 1000Base-BX 1550/1490m, 80km, Cisco Systems compatible 0 / 5-26 / -3 ***C1 Exclusive*** SINGLE FIBER SFP+ IEEE Std 802.3ae, 802.3aq (10Gbase-LRM) SFP+ MSA (multi-source agreement) LAN/WAN Simplex LC connector Notes An exclusive offer from Champion ONE Dual SFP+ 10GS-B27-10-CSC 1270 /1330 SMF 10 0 to 70 SFP+ SF 10GBase-LR 1270 / km, Cisco Systems compatible -5 / 0-14 / 0.5 ***C1 Exclusive*** 10GS-B33-10-CSC 1330 / 1270 SMF 10 0 to 70 SFP+ SF 10GBase-LR 1330 / km, Cisco Systems compatible -5 / 0-14 / 0.5 ***C1 Exclusive*** 10GS-B27-40-CSC 1270 /1330 SMF 40 0 to 70 SFP+ SF 10GBase-ER 1270 / km, Cisco Systems compatible 1 / 6-15 / 0.5 ***C1 Exclusive*** 10GS-B33-40-CSC 1330 / 1270 SMF 40 0 to 70 SFP+ SF 10GBase-ER 1330 / km, Cisco Systems compatible 1 / 6-15 / 0.5 ***C1 Exclusive*** 10GS-B27-60-CSC 1270 /1330 SMF 60 0 to 70 SFP+ SF 10GBase-ER 1270 / km, Cisco Systems compatible 0 / 5-20 / -6 ***C1 Exclusive*** 10GS-B33-60-CSC 1330 / 1270 SMF 60 0 to 70 SFP+ SF 10GBase-ER 1330 / km, Cisco Systems compatible 0 / 5-20 / -6 ***C1 Exclusive*** 4

5 40G QSFP+ IEEE Std 802.3ba QSFP+ MSA (multi-source agreement) 40GBase Ethernet SR - 1x12 MPO, LR - Duplex LC Notes Available in standard temperature (0 to 70 C) Sureport part #* QSFP+ Transceivers Data Rate (Gbps) Avg. Power Per Lane Avg. Power Per Lane Power Consumption (W) Cisco part # 40GEQ-SR4-CSC 850 MMF (OM3 MMF).15 (OM4 MMF) QSFP+ 40GBase-SR4 850nm, 100/150m, Cisco Systems compatible -7.6 / / 2.4 <1.5 QSFP-40G-SR4 40GEQ-LR4-CSC L1: to L2: to L3: to L4: to SMF QSFP+ 40GBase-LR4 850nm, 10 km, Cisco Systems compatible -7.0 / / 2.3 <3.5 QSFP-40G-LR4 DUAL FIBER XFP XFP MSA (multi-source agreement) IEEE Std Fibre Draft Physical Interface Specification Compliant with SONET/SDH optical standards SONET OC-192 LAN/WAN 10G Fibre -T G GBASE LAN/WAN + FEC 10G FC and FEC and Weight 71 x 18.5 x 8.5 mm ; 300 g Sureport TM Part # ( C) Cisco part # Multi-rate 10G Dual XFPs 10GEXFP-SR-CSC 850 MMF to 70 XFP 10GBASE-SR 30m, Cisco Systems compatible -7.3 / / -1.0 XFP-10G-MM-SR 10GEXFP-LR-CSC 1310 SMF 10 0 to 70 XFP 10GBASE-LR 10km, multi-rate, Cisco Systems compatible -6.0 / / GEXFP-ER-CSC 1550 SMF 40 0 to 70 XFP 10GBASE-ER 40km, multi-rate, Cisco Systems compatible -1.0 / / -1.0 XFP10GLR-192SR-L XFP10GLR192SR-RGD XFP-10GLR-OC192SR XFP-10GER-192IR+ XFP10GER-192IR-L XFP10GER192IR-RGD XFP-10GER-OC192IR 10GEXFP-ZR-CSC 1550 SMF 80 0 to 70 XFP 10GBASE-ZR 80km, multi-rate, Cisco Systems compatible 0.0 / / -7.0 XFP-10GZR-OC192LR 5

6 SINGLE FIBER XFP XFP MSA (multi-source agreement) LAN/WAN 10G Fibre Simplex LC connector Notes C1 Exclusive Product /Fibre /SONET/SDH/OTU2/OTU2e/OTU3 10GX-B27-10-CSC 1270 / 1330 MMF 10 0 to 70 XFP SF 10GBase-LR 1270 / km, Cisco Systems compatible -5.0 / ***C1 Exclusive*** 10GX-B33-10-CSC 1330 / 1270 MMF 10 0 to 70 XFP SF 10GBase-LR 1330 / km, Cisco Systems compatible -5.0 / ***C1 Exclusive*** 10GX-B27-40-CSC 1270 / 1330 SMF 40 0 to 70 XFP SF 10GBase-ER 1270 / km, Cisco Systems compatible 0.0 / ***C1 Exclusive*** 10GX-B33-40-CSC 1330 / 1270 SMF 40 0 to 70 XFP SF 10GBase-ER 1330 / km, Cisco Systems compatible 0.0 / ***C1 Exclusive*** 10GX-B27-60-CSC 1270 / 1330 SMF 60 0 to 70 XFP SF 10GBase-ER 1270 / km, Cisco Systems compatible 0.0 / ***C1 Exclusive*** 10GX-B33-60-CSC 1330 / 1270 SMF 60 0 to 70 XFP SF 10GBase-ER 1330 / km, Cisco Systems compatible 0.0 / 5/ ***C1 Exclusive*** CWDM SFP IEEE Std (Gigabit Ethernet 802.3z,802.3ah, FastE 802.3u) Fibre Draft Physical Interface Specification FC-PI-2 Compliant with SONET/SDH optical standards SFP MSA (multi-source agreement) 1G Fibre Cisco part #s GES-CXX-80-CSC 1470 (xx=47) to 1610 (xx=61), at 20nm intervals SMF 80 0 to 70 SFP 1000BASE-ZX CWDM 1xx0nm 80km, multi-rate, Cisco Systems compatible 0.0 / / -7.0 CWDM-SFP-1xx0 7

7 DWDM SFP IEEE Std (Gigabit Ethernet 802.3z,802.3ah, FastE 802.3u) Fibre Draft Physical Interface Specification FC-PI-2 Compliant with SONET/SDH optical standards SFP DWDM MSA (multi-source agreement) Fast Ethernet (125Mbps) SONET OC-3 (155Mbps)/OC-12 (622Mbps)/OC-48 (2.488Gbps) Gigabit Ethernet (1.25Gbps) 1G and 2G Fibre Sureport part #* Multi-rate capable 2 (SONET OC-48/OC-12/OC-3, 1G and 2G Fibre, Gigabit and Fast Ethernet 1 ) GES-Dxx-80-CSC (xx=ch. 61) to (xx=ch. 20) SMF 80 0 to 70 SFP 1000BASE-ZX DWDM CHxx 80km, multi-rate, Cisco Systems compatible 0.0 / 4/ / -9.0 DWDM-SFP-xxxx GES-Dxx-120-CSC (xx=ch. 61) to (xx=ch. 20) SMF to 70 SFP 1000BASE-ZX DWDM CHxx 120km, multi-rate, Cisco Systems compatible 0.0 / / DWDM-SFP-xxxx 1. Fast Ethernet Compatible. Tested to Bellcore GR-253 and -T G.957 Specifications for SONET OC-3/SDH STM-1 application Supported s/s CWDM SFP+ SFP+ MSA (multi-source agreement) ZR/ZW 10G Fibre, 10G Fibre 10GS-Cxx-70-CSC (xx = 47) (xx = 61) at 20nm intervals Cisco part #s SMF 70 0 to 70 SFP+ 10GBASE-ZR CWDM 1xx0nm 70km, Cisco Systems compatible 0.0 / / -6.0 CWDM-SFP 10G-xxxx

8 DWDM SFP+ IEEE Std 802.3ae Fibre Draft Physical Interface Specification SFP+ MSA (multi-source agreement) 10G Fibre Sureport part#* Cisco part #(s) Multi-protocol 10G (10G LAN/WAN, 10G FC, OC-192, +FEC) 10GS-Dxx-40-CSC 10GS-Dxx-80-CSC (xx = ch. 61) (xx = ch. 20) (xx = ch. 61) (xx = ch. 20) SMF 40 0 to 70 SFP+ 10GBASE-ER DWDM CHxx 40km, Cisco Systems compatible -1.0 / / 0.5 ***C1 Exclusive*** SMF 80 0 to 70 SFP+ 10GBASE-ZR DWDM CHxx 80km, Cisco Systems compatible -1.0 / / -7.0 DWDM-SFP10G-wx.yz Supported s/s CWDM XFP XFP MSA (multi-source agreement) LAN/WAN 10G Fibre SONET OC x 18.5 x 8.5 mm ; 300 g Sureport TM Part # LAN and WAN, OC-192, 10G Fibre 10GX-Cxx-80-CSC 1470 (xx = 47) (xx = 61), at 20nm intervals SMF 80 0 to 70 XFP 10GBASE-ZR CWDM 1xx0nm 80km, multi-rate, Cisco Systems compatible Cisco part # 0.0 / / -9.0 CWDM-XFP-xxxx 9

9 DWDM XFP Standards and Regulatory Compliance IEEE Std 802.3ae Fibre Draft Physical Interface Specification Compliant with SONET/SDH optical standards XFP MSA (multi-source agreement) SONET OC-192 LAN/WAN 10G Fibre -T G GBASE LAN/WAN + FEC 10G FC and FEC 71 x 18.5 x 8.5 mm ; 300 g Sureport TM part # Cisco part # Multi-protocol 10G (10G LAN/WAN, 10G FC, OC-192, +FEC) 10GX-Dxx-80-CSC (ch. 61) (ch. 17) SMF 80-5 to 70 XFP 10GBASE-ZR DWDM CHxx 80km, multi-rate, Cisco Systems compatible -1.0 / / -7.0 DWDM-XFP-wx.yz channel Frequency (THz) channel Frequency (THz) channel Frequency (THz) channel Frequency (THz) Supported s/s Supported s/s Supported s/s Supported s/s

10 COPPER (RJ-45) SFP sss SFP MSA (multi-source agreement) IEEE Std /100/1000Base Ethernet Copper RJ-45 * Data rate ( C) LOS Support? TX_disable Support? Gigabit Ethernet (1.25 Gbps), 1G Fibre ( Gbps) GESFP-TX-CSC 10/1000Mbps twisted pair to 70 SFP 10/100/1000-T 100m, multi-rate, Cisco Systems compatible GLC-T/SFP-GE-T (10/100/1000) No No GESFP-TX-L-CSC 10/1000Mbps twisted pair to 70 SFP 10/100/1000-T 100m, multi-rate, Cisco Systems compatible GLC-T/SFP-GE-T (10/100/1000) Yes Yes DUAL FIBER X2 IEEE Std 802.3ae, 802.3aq (10Gbase-LRM) X2 MSA (multi-source agreement) 10G Fibre Duplex SC connector 91 x 36 x mm ; 300 g Sureport part # Compatible (10GX2E version) and 10G Fibre (10GX2F version) 10GEX2-SR-CSC 850 MMF.03 0 to 70 X2 10GBASE-SR 30m, Cisco Systems compatible -7.3 / / -1.0 X2-10GB-SR 10GEX2-LR-CSC 1310 SMF 10 0 to 70 X2 10GBASE-LR 10km, Cisco Systems compatible -8.2 / / 0.5 X2-10GB-LR 10GEX2-ER-CSC 1550 SMF 40 0 to 70 X2 10GBASE-ER 40km, Cisco Systems compatible -4.7 / / -1.0 X2-10GB-ER 10GEX2-ZR-CSC 1550 SMF 80 0 to 70 X2 10GBASE-ZR 80km, Cisco Systems compatible 4.0 / / -7.0 X2-10GB-ZR 10

11 CWDM X2 IEEE Std 802.3ae X2 MSA (multi-source agreement) Duplex SC connector 91 x 36 x mm ; 300 g Compatible 10GX2-Cxx-80-CSC 1470 (xx = 47) (xx = 61) at 20nm intervals SMF 80 0 to 70 X2 10GBASE-ZR CWDM 1xx0nm 80km, Cisco Systems compatible -4.0 / / -7.0 CWDM-X2-xxxx DWDM X2 IEEE Std 802.3ae X2 MSA (multi-source agreement) /SONET/SDH/OTU2/OTU2e/OTU3 Duplex SC connector 91 x 36 x mm ; 300 g * /SONET/SDH/OTU2/OTU2e/OTU3 10GX2-Dxx-40-CSC 10GX2-Dxx-80-CSC (ch. 61) (ch. 20) (ch. 61) (ch. 20) SMF 40 0 to 70 X2 10GBASE-ER DWDM CHxx 40km, Cisco Systems compatible -1.0 / / 0.5 ***C1 Exclusive*** SMF 80 0 to 70 X2 10GBASE-ZR DWDM CHxx 80km, Cisco Systems compatible -4.0 / / -7.0 DWDM-X2-wx.yz Supported s/s

12 DUAL FIBER XENPAK IEEE Std 802.3ae XENPAK MSA (multi-source agreement) Duplex SC connector 121 x 36 x 18 mm ; 300 g ( C) Cisco part # Gigabit Ethernet (1.25 Gbps), 1G Fibre ( Gbps) 10GEXPK-SR-CSC 850 MMF.03 0 to 70 XENPAK 10GBASE-SR 30m, Cisco Systems compatible -7.3 / / -1.0 XENPAK-10GB-SR 10GEXPK-LR-CSC 1310 SMF 10 0 to 70 XENPAK 10GBASE-LR 10km, Cisco Systems compatible -8.2 / / 0.5 XENPAK-10GB-LR(+) 10GEXPK-ER-CSC 1550 SMF 40 0 to 70 XENPAK 10GBASE-ER 40km, Cisco Systems compatible -4.7 / / -1.0 XENPAK-10GB-ER(+) 10GEXPK-ZR-CSC 1550 SMF 80 0 to 70 XENPAK 10GBASE-ZR 80km, Cisco Systems compatible -4.0 / / -7.0 XENPAK-10GB-ZR CWDM XENPAK IEEE Std 802.3ae XENPAK MSA (multi-source agreement) Duplex SC connector 121 x 36 x 18 mm ; 300 g Compatible Cisco part #s 10GXK-Cxx-80-CSC 1470 (xx = 47) (xx = 61) at 20nm intervals SMF 80 0 to 70 XENPAK 10GBASE-ZR CWDM 1xx0nm 80km, Cisco Systems compatible -4.0 / 0/ / -7.0 CWDM-XENPAK-xxxx 12

13 DWDM XENPAK IEEE Std 802.3ae XENPAK MSA (multi-source agreement) Duplex SC connector 121 x 36 x 18 mm ; 300 g 10GXK-Dxx-80-CSC (ch. 61) (ch. 20) Cisco part # SMF 80 0 to 70 XENPAK 10GBASE-ZR DWDM CHxx 80km, Cisco Systems compatible -1.0 / / -7.0 DWDM-XENPAK-wx.yz Supported s/s DUAL FIBER GBIC IEEE Std Fibre Draft Physical Interface Specification FC-PI-2 GBIC MSA (multi-source agreement) Gigabit Ethernet (1.25Gbps) 1G Fibre Duplex SC connector 19 x 39.1 x 88.9 mm ; 75 g Sureport TM Part # ( C) Cisco Part # Gigabit Ethernet, 1G Fibre GEGBC-SX-CSC 850 MMF to 70 GBIC 1000BASE-SX 550m, Cisco Systems compatible -9.5 / / 0.0 WS-G5484 GEGBC-LX-CSC 1310 SMF 10 0 to 70 GBIC 1000BASE-LX/LH 10km, Cisco Systems compatible -9.3 / / -3.0 WS-G5486 GEGBC-ZX-CSC 1550 SMF 80 0 to 70 GBIC 1000BASE-ZX 80km, Cisco Systems compatible 0.0 / / -3.0 WS-G

14 COPPER (RJ-45) GBIC sss GBIC MSA (multi-source agreement) IEEE Std /100/1000Base Ethernet Copper RJ x 39.1 x 88.9 mm ; 75 g Data rate ( C) Gigabit Ethernet (1.25 Gbps), 1G Fibre ( Gbps) GEGBC-TX-CSC 10/1000Mbps twisted pair to 70 GBIC 1000Base-T 100m, Cisco Systems compatible WS-G5483 SFP+ DIRECT ATTACH CABLE IEEE Std 802.3ba SFP+ MSA (multi-source agreement) All feature a limited 3-year warranty (transceivers) 1, 3, 5, 7m (cable length) DACs and breakouts terminate with their respective form factor transceivers. Length (m) Standard Max. Data Rate (Gbps) SFP+ to SFP+ Direct Attact Cable (DAC) 10GESPDC-0x-CSC x = 1 / 3 / 5 / 7 m 10GBase-CR 0 to 70 SFP+ 10GBASE-CR 1/3/5/7m, Cisco Systems compatible 11.1 SFP-H10GB-CU1M SFP-H10GB-ACU7M 14

15 Service and Support Brochure Running a network or selling network services and products can be a highly competitive endeavor. To help differentiate your business and enable you to provide more cost effective infrastructure, you require a partner that provides competitive pricing and vertical market expertise. At Champion ONE we understand your needs. We leverage our skills and relationships to: Provide network design services and help you explore alternative network designs you may not have considered Provide technical and sales support when you need it Accept orders for same day shipment up to 3:00 PM EST Offer some of the longest warranties in the industry Offer a 30-day return policy Build a long- term supplier partnership with you You can rely on Champion ONE, not only for the highest levels of availability for the products you need, but the technical support, customer service and cost consideration you deserve. Our goal is your complete satisfaction. The Champion ONE Commitment For over twenty years, we at Champion ONE have been delivering great value to our customers through high-quality products at competitive prices. As one of the leading suppliers of compatible optical transceivers and a major supplier of optical networking solutions, we take great pride in building long-term relationships as a trusted partner. In this spirit, everything we bring to market bears the Champion ONE Shield TM, which strengthens this trust through five core promises: Performance, Availability, Compatibility, Protection, and Value. 15 Global Headquarters Champion ONE Mercantile Road Beachwood, OH Phone: Fax: sales@championone.net All product photos are representative samples only. Champion ONE and the Champion ONE logo, are registered trademarks of Champion Optical Network Engineering, LLC. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Champion ONE assumes no responsibility for any inaccuracies in this document. Champion ONE reserves the right to change, alter, or otherwise revise this document without notice REV 4.1