SIP and SPA Product Overview

Transcription

1 SIP and Product Overview Overview, page 1 SIP and Compatibility, page 2 Modular Optics Compatibility, page 3 Overview Interface Processors (SIP) and Shared Port Adaptors () are a carrier card and port adapter architecture that increases modularity, flexibility, and density across Cisco routers for network connectivity. Interface Processors The following list describes some of the general characteristics of a SIP: A SIP is a carrier card that inserts into a router slot like a line card. It provides no network connectivity on its own. A SIP contains one or more bays (subslots), which are used to house one or more s. The provides interface ports for network connectivity. During normal operation the SIP should reside in the router fully populated either with functional s in all bays, or with a blank filler plate (-BLANK=) inserted in all empty bays. SIPs support online insertion and removal (OIR) with s inserted in their bays. s also support OIR and can be inserted or removed independently from the SIP. The Cisco ubr10012 router supports the following SIPs: Cisco Wideband SIP (PID UBR10-2XDS-SIP) Starting with Cisco IOS Release 12.2(33)SCH, support for Cisco Wideband SIP on the Cisco ubr10012 router is not available. Cisco Series Interface Processor-600 (PID SIP-600) Cisco ubr10012 Universal Broadband Router SIP and Software Configuration Guide 1

2 SIP and Compatibility SIP and Product Overview Shared Port Adapters The following list describes some of the general characteristics of a : A is a modular type of port adapter that inserts into a bay of a compatible SIP carrier card to provide network connectivity and increased interface port density. A SIP can hold one or more s, depending on the SIP type. s are available in various types. Cisco 5-Port Gigabit Ethernet (PID -5X1GE-V2) Cisco 1-Port 10-Gigabit Ethernet (PID -1X10GE-L-V2) Cisco Wideband (PID UBR10-2XDS-SIP) Cisco 3 Gbps Wideband Shared Port Adapter (PID -UBR10-DS-HD) Cisco 6 Gbps Wideband Shared Port Adapter (Effective with Cisco IOS Release 12.2(33)SCI1, the PID is -UBR10-DS-6G) In the Cisco IOS Release 12.2(33)SCI, the Cisco 6 Gbps Wideband Shared Port Adapter uses the same hardware as the Cisco 3 Gbps Wideband Shared Port Adapter (PID -UBR10-DS-HD) with an upgraded field-programmable device (FPD) image. You must upgrade the FPD image on the Cisco 3 Gbps Wideband Shared Port Adapter to configure it as a Cisco 6 Gbps Wideband Shared Port Adapter. Each provides a certain number of connectors, or ports, that are the interfaces to one or more networks. Either a blank filler plate or a functional should reside in every bay of a SIP during normal operation to maintain cooling integrity. Blank filler plates are available in single-height form only. s support online insertion and removal (OIR). They can be inserted or removed independently from the SIP. SIPs also support OIR with s inserted in their bays. SIP and Compatibility The table below lists the SIPs and s supported on the Cisco ubr10012 router. Table 1: SIP and Compatibility Summary SIP Maximum Number of SIPs per CMTS Maximum Number of s per SIP CiscoWideband Cisco 5-Port Gigabit Ethernet Cisco 1-Port 10-Gigabit Ethernet Cisco 3 Gbps Wideband Shared Port Adapter Cisco 6 Gbps Wideband Shared Port Adapter 2 Cisco ubr10012 Universal Broadband Router SIP and Software Configuration Guide

3 SIP and Product Overview Modular Optics Compatibility SIP Maximum Number of SIPs per CMTS Maximum Number of s per SIP CiscoWideband SIP Cisco Series Interface Processor with PRE2 2 with PRE4 2 with PRE Not supported starting with Cisco IOS Release 12.2(33)SCH. 2 Not compatible with PRE5. 3 With a PRE2 configuration, the Cisco ubr10012 router can support only one Cisco SIP-600 that can house a maximum of four Cisco Wideband s. With a PRE4 configuration, the Cisco ubr10012 router can support two Cisco SIP-600s that can together house a maximum of six Cisco Wideband s. 4 With PRE4 and PRE5. 5 Only with PRE5. 6 Only with PRE5. The values indicate the aggregate bandwidth supported by the SIP across all subslots not per subslot. Modular Optics Compatibility Some s implement small form-factor pluggable (SFP or XFP/SFP+) optical transceivers to provide network connectivity. The SFP and XFP modules are fiber-optic transceiver devices that mount to the front panel to provide network connectivity. SFP modules are optics modules with speeds lower than 10 gigabits per second (Gb/s); XFP modules are optics modules with speeds equal to or greater than 10 Gb/s. Cisco qualifies the SFP modules that can be used with s. The s accept only the optics modules listed as supported in this document. Each time an SFP or XFP module is inserted into a, a check is run. Only SFP and XFP modules that pass this check are usable. The table below lists the types of optics modules that are qualified for use with a. Cisco ubr10012 Universal Broadband Router SIP and Software Configuration Guide 3

4 Modular Optics Compatibility SIP and Product Overview Table 2: Optics Compatibility Cisco 6 Gbps Wideband Shared Port Adapter Qualified Optics Modules Cisco Part Numbers For SFP+ SFP-10G-SR-X SFP-10G-LR-X Wavelength SFP-10G-SR-X: 840 to 860 nm SFP-10G-LR-X: 1260 to 1355 nm Cisco 3 Gbps Wideband Shared Port Adapter For SFP+ For SFP SFP-10G-SR-X SFP-10G-LR-X GLC-SX-MMD GLC-LH-SMD GLC-ZX-SMD SFP-GE-T (1000Base-T) SFP-10G-SR-X: 840 to 860 nm SFP-10G-LR-X: 1260 to 1355 nm GLC-SX-MMD: 850 nm GLC-LH-SMD: 1310 nm GLC-ZX-SMD: 1550 nm SFP-GE-T (1000Base-T): N/A Cisco Wideband SFP-GE-T GLC-SX-MM GLC-LH-SM GLC-ZX-SM GLC-T= (Class B-compliant) SFP-GE-T: N/A GLC-SX-MM: 850 nm GLC-LH-SM: 1300 nm GLC-ZX-SMGLC-T= (Class B-compliant): 1550 nm Cisco 1-Port 10-Gigabit Ethernet XFP-10GLR-OC192SR XFP-10GER-OC192IR XFP-10GZR LR-2 XFP-10G-MM-SR DWDM-XFP-xx.xx= XFP-10GLR-OC192SR: 1310 nm XFP-10GER-OC192IR: 1550 nm XFP-10GZR LR-2: 1550 nm XFP-10G-MM-SR: 850 nm DWDM-XFP-xx.xx: 4 Cisco ubr10012 Universal Broadband Router SIP and Software Configuration Guide

5 SIP and Product Overview Modular Optics Compatibility Cisco 5-Port Gigabit Ethernet Qualified Optics Modules Cisco Part Numbers SFP-GE-L SFP-GE-S SFP-GE-T SFP-GE-Z Wavelength to nm SFP-GE-L: 1270 to 1355 nm SFP-GE-S: 770 to 860 nm SFP-GE-T: N/A SFP-GE-Z: 1500 to 1580 nm Cisco ubr10012 Universal Broadband Router SIP and Software Configuration Guide 5

6 Modular Optics Compatibility SIP and Product Overview 6 Cisco ubr10012 Universal Broadband Router SIP and Software Configuration Guide