Huawei AP2030DN Access Point Datasheet

Transcription

1 Huawei AP2030DN Access Point Datasheet

2 Huawei AP2030DN Access Point Datasheet Huawei AP2030DN is the latest-generation gigabit wall plate access point that complies with ac. It can easily be installed in a standard 86-mm junction box without affecting interior room space or appearance. The AP2030DN's innovative design boasts built-in antennas, a hidden indicator, and a sliding panel. It provides enhanced service support capabilities and high security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance. Product Features Recommended for environments with densely distributed small rooms, such as hotels, dormitories, hospitals, and offices ac-compliant, a rate of up to Gbit/s for both radios Huawei AP2030DN Access Point 2.4 GHz and 5 GHz frequency bands IEEE a/b/g/n/ac Huawei AP2030DN : Multiple ports: includes one uplink GE port, four downlink FE ports, and two RJ11 phone ports, particularly suited to hotels, apartments, and offices. Comprehensive user access control: implements user access control according to user group policies with support for up to 64 users. High level of security: supports multiple authentication and encryption methods, as well as rogue AP and STA detection. Flexible networking and strong environmental adaptability: automatically adjusts the transmission rate, channel, transmit power, and bandwidth to adapt to various environments, and supports identification, location, and display for more than eight types of interference sources. Easy to manage and maintain: supports plug-and play (PnP) and works with network management system (NMS) to implement remote configuration and rapid fault location. Smooth network experience: supports Layer 2 and Layer 3 roaming to ensure nonstop service transmission as users move. Spectrum analysis for detecting and analyzing surrounding interference sources WIDS/WIPS for monitoring and countering rogue terminals and APs High Density Boost with unparalleled multi-user concurrent performance Fast roaming without service interruption Beamforming IPv4/IPv6 dual stack Automatic batch upgrades Pass-through wired port: users can connect to a wired port to access the Internet when wireless connections are unavailable Scalability When coupled with Access Controllers (ACs) and Network Management Systems (NMSs), Huawei ac APs can implement real-time monitoring, intelligent Radio Frequency (RF) management, spectrum analysis, wireless positioning, load balancing, roaming, security policy control, wired and wireless convergence, as well as Bring Your Own Device (BYOD) network security control and smart access management. The AC + Fit AP architecture is highly scalable and supports centralized management of multiple Fit APs on a single AC. Software upgrade technologies allow users to seamlessly add and upgrade APs without incurring additional administrative or equipment costs. 1 HUAWEI WLAN Products Portfolio

3 AP Networking The following figure shows a typical AP2030DN networking. Wall plate AP2030DN networking Branch router Internet Core switch AC6605/AC6005 PoE switch AP2030DN AP2030DN AP2030DN AP2030DN Room Room Room Room The wall plate AP2030DN operates as a Fit AP on the network and provides data forwarding functions. An AC implements user access, AP management, authentication, routing, security, and Quality of Service (QoS). Basic Specifications Item Physical specifications Power specifications Environmental specifications Dimensions (W x D x H) Weight System memory Power input Maximum power consumption Operating temperature Storage temperature Operating humidity Altitude Atmospheric pressure Specifications 86 mm x 140 mm x 41.5 mm 0.2 kg 128 MB PoE power supply in compliance with IEEE 802.3af/at Power supply by a power adapter: 12 V ± 10%, 16 V MAX, 2.1 mm DC JACK 8.7W 0 o C to 40 o C 40 o C to 70 o C 5% to 95% (non-condensing) 60 m to 5,000 m 70 kpa to 106 kpa HUAWEI WLAN Products Portfolio 2

4 Radio Specifications Item Antenna type Antenna gain Maximum number of users Maximum transmit power Power increment Description Built-in antennas 2.4 GHz: 2 dbi 5 GHz: 3 dbi GHz: 21 dbm 5 GHz: 20 dbm NOTE: The actual maximum transmit power depends on local laws and regulations. 1 dbm 2.4 GHz b (CCK): 1 Mb/s; 11 Mb/s 2.4 GHz g (non-ht20): 6 Mb/s; 54 Mb/s 2.4 GHz n (HT20): -95 MCS0; -77 MCS7 2.4 GHz n(HT40): -93 MCS0; -74 MCS7 Receiver sensitivity 5 GHz a (non-ht20): Mb/s; 54 Mb/s 5 GHz n (HT20): -94 MCS0; -76 MCS7 5 GHz n (HT40): -91 MCS0; MCS7 5 GHz ac (VTH20): -95 MCS0NSS1; -71 MCS8NSS1 5 GHz ac (VTH40): -91 MCS0NSS1; -66 MCS9NSS1 5 GHz ac (VTH80): -88 MCS0NSS1; -63 MCS9NSS1 Product Features WLAN Compliance with IEEE a/b/g/n/ac Maximum rate: Gbit/s Maximum Ratio Combining (MRC) Cyclic Shift Diversity (CSD) Maximum Likelihood Detection (MLD) Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only) Dynamic Frequency Selection (DFS) Short Guard Interval (GI) in 20 MHz and 40 MHz modes Priority mapping and packet scheduling according to a Wi-Fi Multimedia (WMM) 3 HUAWEI WLAN Products Portfolio

5 WLAN Network QoS profile for priority-based data processing and forwarding Automatic and manual rate adjustment (the rate is adjusted automatically by default) WLAN channel management and channel rate adjustment Automatic channel scanning and interference avoidance Service Set Identifier (SSID) hiding, support for SSIDs in Chinese Signal Sustain Technology (SST) Unscheduled Automatic Power Save Delivery (U-APSD) Control and Provisioning of Wireless Access Points (CAPWAP) Automatic access in Fit AP mode Hotspot2.0 in Fit AP mode k and v smart roaming in Fit AP mode Compliance with IEEE 802.3u Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X) SSID-based VLAN assignment 4094 VLAN IDs (1-4094) and a maximum of 8 Virtual APs (VAPs) for each radio AP control channel in tagged and untagged mixed mode DHCP client (IP addresses are obtained through DHCP) Tunnel forwarding and direct forwarding STA isolation in the same VLAN Multicast Domain Name Service (mdns) gateway protocol: supports AirPlay and AirPrint service sharing between users of different VLANs Access Control Lists (ACLs) Link Layer Discovery Protocol (LLDP) Service holding upon CAPWAP link disconnection in direct forwarding Unified authentication on the AC Soft GRE Priority mapping and packet scheduling according to a WMM profile for prioritybased data processing and forwarding WMM parameter management for each radio WMM power saving Priority mapping for upstream packets and flow-based mapping for downstream packets Queue mapping and scheduling User-based bandwidth limiting Adaptive bandwidth management (the system dynamically adjusts bandwidth allocation based on the user quantity and environment to improve user experience) Fair airtime scheduling HUAWEI WLAN Products Portfolio 4

6 Security Maintenance BYOD Spectrum analysis Open system authentication WEP authentication/encryption WPA/WPA2-PSK authentication and encryption WPA/WPA x authentication and encryption WAPI authentication and encryption WIDS including rogue AP and STA detection, attack detection, STA/AP blacklist and whitelist w Protected Management Frames (PMFs) Unified management and maintenance on the AC Plug-and-Play (PnP) in Fit AP mode: automatic access and configuration loading Automatic batch upgrades Local AP management using Telnet Real-time configuration monitoring and rapid fault location using the NMS System status alarm Identifies the device type according to the Organizationally Unique Identifier (OUI) in the MAC address. Identifies the device type according to the User Agent (UA) information in an HTTP packet. Identifies the device type according to DHCP options. The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets. Identifies interference sources such as Bluetooth devices, microwave ovens, cordless phones, ZigBee devices, wireless game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors. Works with the Huawei esight system to locate and perform spectrum analysis on interference sources. Standards Compliance Safety Radio EMC UL IEC ETSI EN ETSI EN EN EN ETSI EN ICES-003 YD/T ITU k.21 GB 9254 EN GB 4943 RSS-210 AS/NZS 4268 GB EN EN CISPR 22 CISPR 24 IEC IEC HUAWEI WLAN Products Portfolio

7 IEEE IEEE a/b/g/n/ac IEEE h IEEE d IEEE e IEEE k IEEE u IEEE v IEEE w Security i, Wi-Fi Protected Access 2 (WPA2), and WPA 802.1x Advanced Encryption Standards (AES) and Temporal Key Integrity Protocol (TKIP) EAP Type (s) Environmental EMF RoHS Reach WEEE ETSI ETSI ETSI CENELEC EN CENELEC EN RSS-102 Directive 2002/95/EC & 2011/65/EU Regulation 1907/2006/EC Directive 2002/96/EC & 2012/19/EU ETSI ETSI ETSI Professional Service and Support Huawei WLAN planning tools deliver expert network design and optimization services using the most professional simulation platform in the industry. Backed by fifteen years of continuous investment in wireless technologies, extensive network planning and optimization experience, as well as rich expert resources, Huawei helps customers: Design, deploy, and operate a high-performance network that is reliable and secure. Maximize return on investment and reduce operating expenses. More Information For more information, please visit or contact your local Huawei office. Enterprise Services Product Overview Marketing Documentation HUAWEI WLAN Products Portfolio 6

8 Copyright Huawei Technologies Co., Ltd All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademark Notice, HUAWEI, and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Other trademarks, product, service and company names mentioned are the property of their respective owners. General Disclaimer The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. There are a number of factors that could cause actual results and developments to differ materially from those expressed or implied in the predictive statements. Therefore, such information is provided for reference purpose only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.