Topcon GRS-1 1 Receiver Field Preparation

Transcription

1 Topcon GRS-1 1 Receiver Field Preparation

2 What do you need to know to get started with your Topcon GRS-1? Topcon GRS-1 Receiver - Field Preparation Some Common Questions Which TopSURV modules do I buy? How does the Topcon GRS-1 Receiver connect to the Internet? How do I setup a cell phone plan for my new Topcon GRS-1? How do I manage cell phone connections within the GRS-1 receiver? How do I know if my GRS-1 is successfully connected to the Internet? How do I send / receive an (with attachment) using the GRS-1? Did you know that the GRS-1 can tether to a computer that is already on the Internet? How can I see my position within Google Maps, live in the field? How do I install Topcon Receiver Utility (TRU) software on a GRS-1 receiver? How do I configure Topcon Receiver Utility (TRU) software to connect to a GRS-1 receiver? How do I use Topcon Receiver Utility (TRU) software to check a GRS-1 receiver? How do I setup TopSURV to connect to my GRS-1 to a local real time network? How do I add a Photo Note with the GRS-1? What do the colored lights on the front of the GRS-1 indicate? How do I switch from using the internal antenna to an external? How do I power the GRS-1 receiver? What options are there for external memory with the GRS-1 receiver? What are some tips and tricks with the Topcon GRS-1 receiver?

3 Topcon GRS-1 1 Receiver The GRS-1 receiver is a dual-frequency, GPS + GLONASS L1, L2 receiver and hand-held controller built to be the most advanced, compact, and portable receiver for the GIS and surveying market. An integrated electronic compass and digital camera make the GRS-1 an all-purpose device that can also be utilized as a field collector. The GRS-1 can receive and process both L1 and L2 signals while using an external PG-A1 antenna. The GRS-1 provides the functionality, accuracy, availability, and integrity needed for fast and easy data collection.

4 What are options for Topcon GRS-1 1 hardware configurations? Survey Grade / Precision Mapping - for use as a member of a Real Time Network. The configuration for this would be a GRS-1 receiver on the pole connected to an external PG-A1 antenna on top. Sub-meter field work done without an external PG-A1 antenna. Configured within TopSURV to use Satellite Based Augmentation System (SBAS). Excellent for GIS code and attribute data collection, recognaissance, or rough delineation. Hand-Held Controller Integrated mini serial port, Bluetooth, and Wi-Fi wireless LAN technology allows the GRS-1 to be easily connected to all Topcon hardware.

5 What do you need to know to get started with your Topcon GRS-1? All GRS-1 receivers will ship with TopSURV data collection software. If the intent is to use the GRS-1 as a rover within a Real Time Network, then you will want to start the process of getting the modem activated and online first. Check that unit has the latest version of Windows Mobile operating system and TopSURV data collection software. Using Topcon Receiver Utility (TRU) software, check that unit has latest receiver firmware.

6 Which TopSURV modules do I buy? To have TopSURV support using a GRS-1 within a Real Time Network, ensure that the GPS+ module is activated. Once the GPS+ module is activated, user has option of adding Roading module if applicable. Add the Total Station module to support the common scenario of using a GRS-1 as a controller for conventional field work.

7 How does the Topcon GRS-1 1 Receiver connect to the Internet? The Topcon GRS-1 receiver is able to establish a connection to the internet in multiple ways: With internal modem (GSM or CDMA) With external Bluetooth enabled cell phone (Bluetooth tethering) With Wi-Fi, also called Wireless LAN (WLAN) With ActiveSync connection to a computer that is on the internet

8 How does the Topcon GRS-1 1 Receiver connect to the Internet? The primary method to have the GRS-1 receiver connect to the internet is to use the internal cellular modem. There are two types of cellular modems available for the GRS-1 receiver: GSM (Global System for Mobile Communications) CDMA (Code Division Multiple Access) The GRS-1 network receiver is also able to establish a wireless Bluetooth connection to an external cell phone.

9 How do I setup a cell phone plan for my new Topcon GRS-1? The most important factor in deciding between the two types of internal modems (GSM or CDMA) is coverage. Look at the coverage maps for the provider that you are considering.

10 How do I setup a cell phone plan for my new Topcon GRS-1? Topcon GRS-1 receivers are available with either an internal GSM or CDMA modem. Only GSM modems use SIM (Subscriber Identity Module) cards. CDMA modems do not have SIM cards. Using either modem type, it is common to describe to the cellular provider that you need a, No Obligation / Unlimited data plan (no voice). Tell the sales representative that you have your own hardware. Common CDMA Providers Common GSM Providers

11 How do I manage cell phone connections within the GRS-1 1 receiver? TPS Connection Manager The Topcon GRS-1 receiver has Windows Mobile 6.1 Classic operating system. Within this operating system, Topcon has introduced the TPS Connection Manager. TPS Connection Manager is a utility software that ships standard within every GRS-1 receiver.

12 How do I manage cell phone connections within the GRS-1 1 receiver? Within the TPS Connection Manager, select Create New Connection Entry. Work your way down the screen. For the Connection Name, ensure not to use any special characters such as an & ampersand. Select a Modem type of Cinterion HC25. Tap Create when done.

13 How do I know if my GRS-1 1 is successfully connected to the Internet? At top center of the desktop screen, there are two arrows that indicate whether the GRS-1 receiver has a successful internet connection. When the arrows are facing left to right (shown above) then a connection to the internet is made.

14 How do I send / receive an e (with attachment) using the GRS-1? Using the TPS Connection Manager within the GRS-1 receiver s Windows Mobile 6.1 desktop screen, you are able to establish a connection to the internet prior to launching TopSURV data collection software. This connection allows unlimited number of options for transferring data such as File Transfer Protocol (FTP) software, using an account to send / receive attachments, Microsoft Live Mesh, etc.

15 Did you know that the GRS-1 1 can tether to a computer that is already on the Internet? Since the Topcon GRS-1 receiver has Windows Mobile operating system, it is able to share an internet connection when tethered to a laptop / computer that is already on the internet. Tethering is using some type of device (laptop / computer) to gain internet access for another mobile device (GRS-1 receiver).

16 Did you know that the GRS-1 1 can tether to a computer that is already on the Internet? If the laptop / computer that you are using is on the internet, once you make an ActiveSync connection between it and a Topcon GRS-1 receiver, the GRS-1 is then also on the internet. This is ideal when performing maintenance and internet software installs in the office.

17 How can I see my position within Google Maps, live in the field? To install the free software of Google Maps on your Topcon GRS-1 receiver, open Internet Explorer and go to: To type the address, tap on the keyboard icon at bottom center.

18 How can I see my position within Google Maps, live in the field? Click the Install Now link. Ensure to check on the option of Open File After Download. Tap Yes. It is common to have the GRS-1 receiver on charge during this process.

19 How can I see my position within Google Maps, live in the field? Tap the Accept button at lower left to proceed. Tap the OK button to launch Google Maps on the Topcon GRS-1 receiver.

20 How can I see my position within Google Maps, live in the field? Within Google Maps software on the GRS-1 receiver, tap the Menu button at lower right. Select the Use GPS option to have Google Maps read in the position of the GRS-1 receiver.

21 Questions?

22 How do I install Topcon Receiver Utility (TRU) software on a GRS-1 1 receiver? All Topcon software is available for download from the Secure Site. To access, go to:

23 How do I install Topcon Receiver Utility (TRU) software on a GRS-1 1 receiver? All Topcon software is available for download from the Secure Site. To access, go to: Within the Software and Firmware section, click on Software Utilities. Then click on TRU link to jump to download section.

24 How do I install Topcon Receiver Utility (TRU) software on a GRS-1 1 receiver? For the Topcon GRS-1 receiver, use TRU for Field Computers (10.9 Mb). You can then either click Run to install directly to a GRS-1 that has an ActiveSync connection to your computer / laptop or Save to install later.

25 How do I install Topcon Receiver Utility (TRU) software on a GRS-1 1 receiver? This will launch the Topcon Receiver Utility InstallShield Wizard. When prompted, click Next to proceed. On your computer / laptop, click the OK button on the Application Downloading Complete message. On the GRS-1 receiver, tap the OK button on the message screen (shown at top right) to continue the software installation process. Done. Topcon Receiver Utility (TRU) software is now installed on your Topcon GRS-1 receiver.

26 How do I install Topcon Receiver Utility (TRU) software on a GRS-1 1 receiver? To launch From the Windows Mobile desktop screen, tap the Start button. Go to Programs to see a listing of all software that is currently installed on your GRS-1 receiver. For the initial launch of TRU software, scroll down and tap the Topcon Receiver Utility icon.

27 How do I configure Topcon Receiver Utility (TRU) software to connect to a GRS-1 1 receiver? For the initial launch of TRU software, you will need to declare connection settings for the GRS-1 receiver. This will only need to be done once and it will recalled for future connections. Tap the triple dot button below Port Name.

28 How do I configure Topcon Receiver Utility (TRU) software to connect to a GRS-1 1 receiver? Select the Friendly Name of GNSS Port B with Physical Name of COM6 as shown above. This will only have to be declared once within TRU software on your GRS-1 receiver. Afterwards, tap the OK button.

29 How do I configure Topcon Receiver Utility (TRU) software to connect to a GRS-1 1 receiver? Lastly, tap the Connect button to establish a connection to your GRS-1 receiver with TRU software. Done. Once the background changes to a solid white color, you are actively communicating to the GRS-1 receiver with TRU software.

30 Questions?

31 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? With a connection made to the GRS-1 receiver with TRU software, tap the Information icon to see a listing of the receiver firmware currently installed. Ensure that the GRS-1 receiver has Receiver Firmware Version 3.4 (build date, 13 May 2009) or higher. All receiver firmware is available from the Topcon Secure Site.

32 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? TPS Connection Manager There multiple ways to do this. The common method is to establish an internet connection prior to opening TopSURV using TPS Connection Manager utility. Check Cellular Power first, then check Data Connection. Once the GRS-1 is connected to the Internet, launch TopSURV data collection software.

33 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? From the TopSURV main menu, go to CONFIG / SURVEY to see a listing of Survey Styles. Tap the triple dot button to the right of GPS+ Config. Select the Configuration template of My Network RTK and tap Edit.

34 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? You can rename or use default name of My Network RTK. Either way, ensure Type is Network RTK and Corrections is VRS. Declare a rover Antenna Type of PG-A1. The Post Process method is an optional check box dependant on the type of field work about to be performed.

35 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? Since you have established an internet connection with TPS Connection Manager prior to opening TopSURV, ensure to select the Modem Connect option of Controller and a Network Type of Existing Network Connection. Next, Add the public IP Address and Port Number of your real time network.

36 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? Enter the NTRIP (Networked Transport of RTCM via Internet Protocol) User Identification and Password issued to you from your real time network manager. For the GRS-1 receiver, the Virtual Radio Port is D.

37 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? From this point forward within the TopSURV configuration screens, all options are user definable. Shown here are commonly used settings.

38 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? Within the Advanced screen, it is common to check on the option of Multipath Reduction. The Satellite System selection is dependant on whether the real time network that you are joining tracks and uses GLONASS satellites. Click Finish and OK to return to the TopSURV main menu.

39 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? With the TopSURV Survey Configuration now made, a convenient Network Connection dialog will appear and automatically begin the process of connecting to your real time network. The Mount Point listing will populate and you will see a message showing Network Connection Started. Tap Close.

40 How do I setup TopSURV to connect to my GRS-1 1 to a local real time network? The Network Connection screen is made available to you one last time to perhaps change from the Mount Point that you commonly use. If you are going change from your usual Mount Point, tap Disconnect, select a different Mount Point, and tap Connect. Otherwise, to use the same Mount Point from a previous field survey (common), simply tap the OK button.

41 Questions?

42 How do I add a Photo Note with the GRS-1? The GRS-1 receiver has an integrated 2 megapixel camera. Within TopSURV, simply tap the Attribute button Tap the Photo Note tab, and the Add button. Select Capture. Aim at the target and tap the camera button. The photo is automatically associated with that point.

43 What do the colored lights on the front of the GRS-1 1 indicate?

44 Topcon GRS-1 Receiver - Field Preparation What do the colored lights on the front of the GRS-1 1 indicate? The Bluetooth / Wireless LAN Blue blink: Internal Bluetooth device is powered on and ready Red blink: Wireless LAN is powered on and ready Violet blink: Notification from Windows No light: The module is currently powered off The Recharging LED indicates the level of charge of the onboard battery Green: Internal battery has a full charge Red: Internal battery is charging Red blink: Charging error (disconnect charging cable and reconnect) The Cell Phone LED indicates the receiving status in the cell phone modem No light: Internal cellular modem is currently powered off Green: Internal cellular modem is available Red: Internal cellular modem is does not have signal from cell network

45 How do I switch from using the internal antenna to an external? Two steps: Physically connect external PG-A1 antenna to GRS-1 receiver with custom cable. Select TopSURV configuration to support hardware change.

46 How do I power the GRS-1 1 receiver? The GRS-1 uses a BT-66Q battery for it s primary power source. When using the GRS-1 for static surveys, the battery will last up to four hours. A backup coin battery and rechargeable battery back up the GPS and clock settings.

47 What options are there for external memory with the GRS-1 1 receiver? Removable Secure Digital (SD) memory cards can be used with the GRS-1 receiver to provide additional data storage, as well as data transfer. The GRS-1 supports SD cards with up to a 2 GB capacity. This device does not currently support Secure Digital High Capacity (SDHC) memory cards.

48 What are some tips and tricks with the Topcon GRS-1 1 receiver? If you are trying to make a connection to a GRS-1 using either Topcon Receiver Utility (TRU) or PC-CDU, make sure that you power the GPS receiver on first. To turn the GPS Receiver Power on / off, use TPS Connection Manager from the Windows Mobile desktop (bottom right corner). Without the external PG-A1 antenna, the onboard antenna of the GRS-1 receiver is L1 signal only. Only while using an external PG-A1 antenna will you be able to track and use more than L1 single frequency.

49 Topcon GRS-1 1 Receiver Field Preparation