Modular Jack Slimline Product Presentation
|
|
|
- Christina Charles
- 5 years ago
- Views:
Transcription
1 Product Presentation Basics Portfolio
2 Agenda Value Proposition Product Overview Product Specifications Features & Benefits Markets & Applications Collaterals Product Presentation- 2
3 Value Proposition Amphenol FCI Slimline next generation Ethernet link, offers a higher density cabling solution for Manufacturers (OEMs) who desire a competitive total cost of ownership per port while maintaining the granularity of a single connector per channel. The port spacing is on a 7mm centerline, occupying half the space of a traditional RJ45 Ethernet link. The new product continues the EON termination with stacked array of IMLA resulting a reduced foot print on PCB Product Presentation- 3
4 Product Improvement (RJ45 v.s ) Approximately double the density offered over the standard RJ45 Ethernet link Receptacle is a modular design to allow for easy and rapid deployment of product extensions Lower total cost of ownership per port RJ45 Product Presentation- 4
5 Product Specifications Product Facts Product meets category 5e performance for 10/100/1000BASE-T applications Port centre to centre spacing 7mm Overall height 13.00mm Performance Characteristics Durability: 50 mating cycles Mating/Unmating Force: 20N max. Temperature Range: 0 C to +70 C High Temperature Life:85 C ±5 C for 7 days Humidity:80%-100% RH,24hr/cycle, total 10 cycles Insulation Resistance: 500MΩ min. Current Rating:1A/Contact max. Contact Resistance: 20mΩ max. Voltage Rating: 250VDC max. Specifications Product Specification: COMPLIANT to IEC Materials Main Housing High Temperature Plastic Terminal Copper Alloy Shield Copper Alloy Product Presentation- 5
6 Features & Benefits Features Signal pairs are oriented vertically Mating interface is rolled sheet metal surface compared with other available solutions Footprint matched with similar solutions in the market Has a brush contact design RoHS compliant and lead free Light pipes are provided Follows press-fit termination Benefits Achieve higher port density and cat 5e transmision speed Ensure good mating and high reliability Interchangeable with other makes Defined contact point compared to traditional RJ45 jack Meets environmental, health and safety requirements Helps to transmit led light source to user interface Avoids secondary soldering process Compliant to IEC Mates with the plug part number : Product Presentation- 6
7 Main Markets & Applications General High density Ethernet switching/routing products Data center switching applications: Top of rack End of row Mid-row Server I/O applications Wiring closet switching products Data & Communication Servers Storage Open Computer Platform Industrial & Instrumentation Embedded Computer Test Equipments Measurement Equipments Product Presentation- 7
8 Collaterals Available on FCI.com Technical Datasheet Product Specifications Part Numbers & Drawings Product Presentation- 8
9 Outline Part Number LF Product Presentation- 9
10 PCB Layout Product Presentation- 10
11 Advantages MATING INTERFACE IS ROLLED SHEETMETAL SURFACE COMPARED WITH CURRENT AVAILABLE SOLUTIONS TE plug P/N : to be used as mating Product Presentation- 11
12 THANK YOU
RJ point five CONNECTOR SYSTEM
RJ point five CONNECTOR SYSTEM Quick Reference Guide TE Connectivity s (TE) next-generation Ethernet link, the RJ point five connector, offers higher density cabling solutions for Original Equipment Manufacturers
Minitek Pwr 4.2 BMI Product Presentation
BMI Product Presentation Basics Portfolio BMI Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Stacking Height Matrix Markets & Applications Collaterals
Bergstak 0.80mm Pitch Product Presentation
Bergstak 0.80mm Pitch Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals
Minitek Pwr 3.0 BMI Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Specifications Features & Benefits Part Numbers Markets & Applications Marcom Collaterals Product Presentation - 2 Value Proposition
Minitek Pwr 4.2 HCC Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Markets & Applications Marcomm Collaterals Product Presentation 2
Minitek Product Presentation
Minitek Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals 2 Value Proposition
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
Modular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
Cat.8 Shielded Field Termination Plug Description
Description RiT s CAT8 Shielded field termination plug are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations.
Modular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN Selector Guide. PCB Connectors
COMMUNICATIONS, DATA, CONSUMER DIVISION DIN 41612 Selector Guide PCB Connectors FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connectors. Our
Cat.8 Shielded Keystone Jack Description
Description RiT s CAT8 Shielded Keystone Jacks are cost-effective building blocks for your cabling system. Meticulously engineered to deliver exceptional performance while streamlining installations. Phosphor
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
MILLIPACS 2MM HARD METRICS SERIES - RIGHT ANGLE HEADER CONNECTORS
BACKPLANE CONNECTORS MILLIPACS 2MM HARD METRICS SERIES - Milipacs Hard Metric Right Angle header Modules are available in all popular versions - Type A, B, C, B19, B22, AB22 and AB25 with shielding row
Millipacs 2mm Hard Metric Connector Selector Guide
Millipacs 2mm Hard Metric Connector Selector Guide Millipacs product family offers 2mm modular Boardto-Board and Cable-to-Board backplane connector solutions. Millipacs product range include low speed
AirMax POWER CONNECTOR MODULES Part of the AirMax Connector Family
Part of the AirMax Connector Family HIGH PERFORMING AND DURABLE CONNECTORS Hard Metric high power connectors are a perfect complement to AFCI s ExaMAX, AirMax, ZipLine and Millipacs signal connectors.
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
Right angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
USB. Amphenol UNIVERSAL SERIAL BUS CONNECTORS
Amphenol USB UNIVERSAL SERIAL BUS CONNECTORS S E R I E S DESCRIPTION The Amphenol UE27 and UE28 Series is a complete RoHS compliant interconnect solution designed in accordance with Universal Serial Bus
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
Product Specification
Product Specification PR041-01 Revision A0 (Date 4-3-2017) Stewart Connector 11118 Susquehanna Trail South Glen Rock, Pa. 17327-9199 Ph: (717) 235-7512 Fax: (717) 235-4675 Product Specification PR0410-01
TECHNICAL DATA SHEET Family code C2424SOLPCORD CAT 6 UTP Solid. version 1 LSNH PATCHCORD date page 1/5
page 1/5 Application: High Density Switch & Hub Working area cord and telecommunications equipment cord in Local Area Networking environments Support current and future Category 6 applications, such as:
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
HDMI Product Presentation
HDMI Product Presentation Where does IO-connections stand for? FCI's I/O connector solutions: high-density high-speed interfaces Applications: networking, storage, and memory, power distribution, media
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
Pwr Blade+ Customer Presentation. Daisy Liu. April 2014
Customer Presentation Daisy Liu April 2014 High Performance PwrBlade Connector - Overview Similar to PwrBlade but with an enhanced power contact design for increased linear current density Includes a 48
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Panel-to-Wire / Board-to-Wire, Crimp and Solder Connection Lever Mating Type Rectangular Connector with EMI Countermeasure QE6 Series CONNECTOR MB-0281-3
DX07 Series USB Type-C Connector
v3.0 DX07 Series USB Type-C Connector Product Information Module Japan Aviation Electronics Industry, Ltd. Proprietary. Copyright 2017, Japan Aviation Electronics Industry, Ltd. JAE DX07 Series USB Type-C
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
HSSDC. HSSDC High Speed Serial Data Connection receptacles. HSSDC Receptacle. U45 - A APPLICATIONS ORDERING INFORMATION
HSSDC High Speed Serial Data Connection receptacles meet high-speed differential communication protocols with speeds exceeding 1 Gbps such as IEEE 802.3z and Fibre Channel. This system is designed to conform
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
Data sheet C6 A modul 1 port 180 M AP pure white
Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification surface-mount termination unit with C6modul 180 certified to GHMT Cat.6 re-embedded PVP component
Stacking Type Board-to-Board (FPC) Connector. WP10 Series
COMPONENTS PRODUCT INFORMATION NEW Stacking Type Board-to-Board (FPC) Connector WP10 Series CONNECTOR MB-0303-2 October 2015 RoHS Compliant Plug Receptacle The WP10 Series is a stacking type
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD
PCBeam Connector for 40-Position BGA/LGA PCBeam Connector for Texas Instruments Series 310 DMD Neoconix P/N: FBX0040CMFF6AU00 FEATURES High density 0.7424mm area-array pitch Low profile, 1.06mm mated height
SFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
Product specification
SMT Modular Jack single port vertical and horizontal 1 of 12 H PAGE 1.0 OBJECTIVE 2 2.0 SCOPE 2 3.0 GENERAL 2 4.0 DEFINITIONS 3.1 Qualification 2 3.2 Material 2 3.3 Finish 2 3.4 Design and construction
XC7. DIN Sequence Connectors. An improved DIN-standard Sequence. Connectors. connectors. Ratings and Characteristics. Materials and Finish
DIN Sequence Connectors XC7 An improved DIN-standard Sequence Connector ows power line to daughter board connection first and removal last. Used the same way as regular DIN connectors. Dimensions are those
ExpressCard Host System
ExpressCard Host System Where does IO-connections stand for? FCI's I/O connector solutions: high-density high-speed interfaces Applications: networking, storage, and memory, power distribution, media card
PRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
Modular plugs, accessories and tooling
Modular plugs, accessories and tooling Introducing the new Cat 6A/6 modular plugs, slim-line boots and color clips CommScope modular plug portfolio CommScope offers a vast portfolio of Modular Plugs for
MODULAR PLUGS, ACCESSORIES AND TOOLING
MODULAR PLUGS, ACCESSORIES AND TOOLING 4th Edition Introducing the New Universal Contact BROADBAND NETWORK SOLUTIONS /// MODULAR PLUGS, ACCESSORIES AND TOOLING TE CONNECTIVITY MODULAR PLUG PORTFOLIO TE
V.6-17 Colibri for COM Express
V.6-17 Colibri for COM Express 0.5 mm SMT Board-to-Board Connector System Introduction Colibri 0.5 mm SMT for 10+ Gbit/s Applications Connectors for COM Express Key Features: Termination ept s Colibri
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
Molex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
Easy and Secure for Rack Systems
Easy and Secure for Rack Systems Front I/O solution designed for Railway applications 3 layouts available 29 pos / 41 pos / 5 Quadrax Compact & high density Design compatible with 3U racks Improved shielding
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
Product Portfolio Overview
Car Electronics KEEPING CONNECTIONS SIMPLE Smart Building Industrial Communications and Data Product Portfolio Overview R&D Sites & Manufacturing Footprint Solution To Fulfill Essential Needs Of Our Customers
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
NeXLev Product Specification TB2144
NeXLev Product Specification TB2144 Revision B Specification Revision Status Revision SCR No. Description Initial Date - S0161 New Release DM 4/5/2006 A S1357 Update copper material callout, DM 8/31/09
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Introduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES
NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller
Modular plugs, accessories and tooling
Modular plugs, accessories and tooling Introducing the new Cat 6A/6 modular plugs, slim-line boots and color clips CommScope modular plug portfolio CommScope offers a vast portfolio of Modular Plugs for
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
USB Type-C TM Connector DX07 Series Receptacle. 2 row SMT Hybrid
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-3 December 2015 RoHS Compliant 2 row SMT Hybrid On-board Type Mid-mount Type On-board Type Mid-mount
Mini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
SFP+ Connector and Cages. Product Presentation
SFP+ Connector and Cages Product Presentation SFP+ I/O System SFP+ (Small Form factor Pluggable) Next generation SFP Single (1x) channel 10Gb/s per channel capability SFF- 8431& 8461 Fully qualified I/O
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Data sheet C6 A modul 90 jack
Illustrations Dimensional drawing Cut-out Page 1/7 See enlarged drawings at the end of document Product specification modular Cat.6 A termination unit RJ45 mounting version: module, 90 cable feed solid,
D-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
ExaMAX High Speed Backplane Connector System Innovative pinless connector system delivering superior electrical performance at speeds 25Gb/s to 56Gb/s
Innovative pinless connector system delivering superior electrical performance at speeds 5Gb/s to 5Gb/s SUPPORTS MANY INDUSTRY STANDARD SPECIFICATIONS; MIGRATION PATH TO HIGHER BANDWIDTH APPLICATIONS ExaMAX
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
Product Specification
USB A CONNECTOR 1 of 7 J 1.0 GENERAL This specification defines the performance, tests and quality requirements for the USB A connector. This document is composed of the following sections. 1. General
USB Type-C TM Connector DX07 Series Receptacle
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
APPLICATION SPECIFICATION. 1 of 22 B Millipacs HM 5 and 8 Row Right Angle Signal Receptacles Millipacs HM Right Angle Headers
1 of 22 B Millipacs HM 5 & 8 Row Receptacle & Right Angle Header Application Specification MPACS 5R RA RCP MPACS 8R RA RCP MPACS 5R RA HDR TABLE OF CONTENTS 2 of 22 B 1. OBJECTIVE...3 2. SCOPE...3 3. GENERAL...3
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
PRODUCT SPECIFICATION
RECEPTACLE.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2. PRODUCT NAME AND
AMP-TWIST* 6S Series SL Jack
Product Specification 108-93003 16/Mar/2011 Rev E AMP-TWIST* 6S Series SL Jack 1. SCOPE 1.1 Content This specification covers performance, tests and quality requirements for AMP NETCONNECT*, AMP- TWIST*
Feb-2016 Rev 1
08-509-2 22-Feb-206 Rev USB Type-C Connector Scope :. Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of TE Connectivity USB type
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
Fine-Coax Wire Connector for Portable Devices. FI-JH Series
COMPONENTS PRODUCT INFORMATION NEW Fine-Coax Wire Connector for Portable Devices FI-JH CONNECTOR MB-0179-1 November 2007 RoHS Compliant In addition to incorporating new functions such as one
Data sheet. 25Gmodul. Illustrations P/N 130B11-25-E EAN Product specification. Page 1/ Dimensional drawing
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification certified by GHMT according to DTR-11801-9905 for 25GBASE-T in the Channel-Link with
Saturn Series Gigabit Ethernet, Sealed RJ-45 & LC, 1000Base-T / LX Media Converter, 24Vdc, Single Mode, 1310nM Lasers
Saturn Series Gigabit Ethernet, Sealed RJ-45 & LC, 1000Base-T / LX Media Converter, 24Vdc, Single Mode, 1310nM Lasers Single Port, LC / RJ-45 FEATURES Compliant with IEEE-802.3:2005 Gigabit Ethernet -
LX3 High Density LGX 1U Patch Panel
LX3 High Density LGX 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette modules
USB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
Millipacs 2mm Hardmetric Product Presentation
Millipacs 2mm Hardmetric Product Presentation Sep 2014 Millipacs Overview Millipacs is a 2.00 mm modular board to board or cable to board Interconnection system in hardmetric configuration designed in
ModularJacks. Amphenol Now You re Connected!
ModularJacks Amphenol Now You re Connected! Amphenol The Company Amphenol Commercial Products Group of Amphenol Canada Corp., a subsidiary of Amphenol Corporation, is an ISO 9001 certified facility located
USB Type-C TM Connector DX07 Series Receptacle
COMPONENTS PRODUCT INFORMATION NEW USB Type-C TM Connector DX07 Series Receptacle CONNECTOR MB-0297-4 December 2016 RoHS Compliant 2 Row SMT Hybrid The DX07 Series are connectors compatible
Product Specification. CLOUDSPLITTER Connector System
Product Specification 01NOV2013 Rev A CLOUDSPLITTER Connector System 1. SCOPE 1.1. Content This specification covers the performance, tests and quality requirements for the CLOUDSPLITTER connector system.
Product Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature