LDALI PLC4. Programmable DALI Controller. Functions DALI. BACnet. CEA 709 M Bus KNX OPC L WEB, L STUDIO L ROC L INX L IOB IOT. Gateways L VIS, L-STAT

Transcription

1 COMPETECE PARTER DAI PC4 Functions Programmable DAI Controller BACnet DAI CEA 709 M Bus KX OPC Datasheet # Built-In or External DAI Power Supply ROC The DAI PC4 Controller needs an external DAI power supply to power up the DAI network. Power supplies are available for single channel or up to four chan nel DAI networks. WEB, STUDIO The DAI PC4 controllers are powerful, freely programmable lighting control lers, which can be programmed by STUDIO. With Alarming, Scheduling, Trending and notification (AST ) the DAI PC4 controller is a perfect solution for DAI lighting systems with application requirements not covered by the standard application of the non-programmable DAI controllers. DAI etwork Interface BACnet OPC XM-DA OPC UA DAI KX Modbus enocean SMI WA The DAI PC4 device is equipped with 4 independent DAI channels. Up to 64 DAI-based luminaries per DAI channel can be controlled individually or via 16 groups. All luminaries are monitored for lamp or ballast defect. DAI represents a DAI-Master in the DAI network which can interact with selected DAI multisensors in Multi-Master mode. IX CEA-709 IoT Integration -IX PC FT B A 5 6 IK ACT RI serial 100Base-T IX-110 power status VDC IPUT or VAC, Hz - + ~ ~ DC AC y=f(x) IEC ocal Operation and Override IEC The DAI Controllers come with a built-in backlit display (128x64) and a jog dial for local operation and override. Using the local operation, maintenance tasks (DAI device replacement, burn-in mode, etc.) can be executed without the need of any software tool. Freely Programmable The DAI PC4 can be programmed using the STUDIO programming tool. It can be programmed using IEC for integration into the ROC system and IEC for stand-alone operation. The DAI PC4 controller provides connectivity functions to concurrently integrate CEA 709 (onmark Systems), BACnet, KX, and Modbus subsystems. onmark Systems can be integrated via IP 852 (Ethernet/ IP). BACnet integration is supported through BACnet/ IP (Ethernet/ IP) or BACnet MS/ TP (RS 485), KXnet/ IP and Modbus TCP via Ethernet/ IP. When the Ethernet ports are configured for two separate IP networks, one port can be connected for instance to a WA (Wide Area etwork) with enabled buildings under control 125 Accessories Each DAI PC4 is equipped with two Ethernet ports. It can either be configured to use the internal switch to interconnect the two ports or every port is configured to work in a separate IP network. Interfaces The gateway functionality allows data communication between all communica tion technologies available on the device. Different technology data points are mapped through ocal Connections on the device. The mapping of different tech nology data points on distributed devices is supported by Global Connections. Routers, IC Connectivity DAI A library containing standard lighting and sunblind control functionality is avail able. It supports various lighting control strategies, presence and lux level based. Several parameters can be used to configure the application for almost any use case. User specific program extensions are possible as well. VIS, -STAT IOB IP +- Gateways VC RS-485 Automation Server CIP ACT 2 1 Gateway IOB IOT The IoT function (node.js) allows connecting the system to almost any cloud ser vice, either for uploading historical data to analytics services, delivering alarm messages to alarm processing services or operating parts of the control system over a cloud service (e.g., scheduling based on Web calendars or booking sys tems). Processing Internet information such as weather data in forecast-based control is also possible. Finally, the JavaScript kernel also allows implementing serial protocols to non-standard equipment in primary plant control.

2 Accessories Interfaces Routers, IC DAI VIS, -STAT Gateways IOB IX ROC WEB, STUDIO Functions Programmable DAI Controller network security (HTTPS) while the second port can be configured to be connected to an insecure network (A) where the standard building automation protocols like BACnet/ IP, O/ IP, or Modbus TCP are present. These devices also feature firewall functionality of course to isolate particular protocols or services between the ports. Using the internal switch, a daisy chained line topology of up to 20 devices can be built, which reduces costs for network installation. The IP switch also allows the setup of a redundant Ethernet installation (ring topology), which increases reliability. The redundant Ethernet topology is enabled by the Rapid Spanning Tree Protocol (RSTP), which is supported by most managed switches. The provides fully featured AST functionality (Alarming, Scheduling, and Trending) and can be integrated perfectly into the WEB System. Device Configuration via Tool or Web Interface The device configuration, commissioning, and parameterization is done either with the configuration tool software or via the integrated web server. EnOcean, SMI and IOB/ IP Wireless EnOcean sensors and buttons can be integrated via the optional EO EnOcean interface. For sunblinds the SMI-804 extension module allows the integration of up to four SMI channels. Physical I/ Os can be integrated through IOB I/ O Modules via IOB IP. Advanced DAI Functions DAI Sensors The Controllers support the integration of DAI multi-sensors for presence detection and light level recognition. In addition to the DAI multi-sensor DAI MS2, DAI sensors of well-known manufacturers can be selected from a list of tested devices. DAI Push Button For manual operation, DAI push button coupler and IR remote controls can be integrated into the system. The function executed when a button is pressed is freely programmable in the program logic. DAI Relay Modules Standard loads in the power grid can be controlled via DAI using DAI Relay Modules. Auto Burn-In for fluorescent amps Fluorescent lamps must be operated about 100 hours with 100 % brightness before they may be dimmed. This burn-in process is monitored by DAI for each lamp. After 100 hours burn-in time, the lamp s constant light control is enabled. Automatic Test of Emergency ighting Systems In DAI emergency lighting systems, DAI can be used for testing the system. The results can be logged. Collection of important Operational Parameters For maximum transparency in the lighting system, DAI can record the operating hours of each lamp and also the energy consumption (calculated). DAI Device Replacement made Easy Defective DAI ballasts can easily be replaced directly on the DAI Controller (CD and jog dial) or via the web interface. o software tool is necessary. 126

3 Features IEC and IEC programmable with STUDIO Supports up to 64 DAI ballasts and 16 DAI groups per DAI channel Supports up to 16 DAI sensors per DAI channel Supports up to 64 DAI push buttons per DAI channel Manual operation using the jog dial and local access to information about device status and data points in clear text and symbols 128x64 graphic display with backlight Built-in web server for device configuration Test and assignment of DAI devices on the web interface Replacement of DAI devices without additional software tools via CD and jog dial Supports the control of standard loads in the power grid via DAI RM1/DAI-RM3 Relay Modules Supports lamp burn-in mode Supports periodic testing of DAI emergency lights Integrated DAI Protocol Analyzer Physical inputs and outputs with IOB I/ O Modules Compliant with CEA 709, CEA 852, and ISO/ IEC Standard (onmark System) Support of dynamically created or static Vs Support of user-defined Vs (UVTs) and Configuration Properties (SCPTs, UCPTs) KXnet/ IP STUDIO 3.0 icenses Type Programming, Tools icense Gateway functions including Smart Auto-Connect Modbus TCP and Modbus RTU (-STAT only) Compliant with ASI/ ASHRAE and ISO :2012 standard Supports BACnet/ IP or BACnet MS/ TP BACnet Client Function (Write Property, Read Property, COV Subscription) B-BC (BACnet Building Controller) functionality, BT certified Alarming, Scheduling, and Trending (AST ) locally or embedded in WEB (building management) ode.js support for easy IoT integration (e.g. Google calendar, Alexa & friends, multimedia equipment, ) Event-driven notification Supports ocal and Global Connections Built-in OPC XM DA and OPC UA server Stores customized graphical pages Visualization of customized graphical pages through WEB 900 (building Management), WEB 803 (Monitoring and Control), or WEB 802 (Web Browser) Stores user-defined project documentation Dual switched or separated Ethernet ports Supports SMI (Standard Motor Interface) through SMI-804 Connection to EnOcean wireless devices via EO 80x Interface Supports WA through WA 800 Interface STUDIO (IEC and IEC based), IX Configurator and configuration via web interface STUDIO: included OGICAD: n/a Programmable DAI Controller Functions WEB, STUDIO ROC IX IOB Gateways VIS, -STAT DAI Routers, IC Interfaces Accessories buildings under control 127

4 1-10V 10A 250V~ Accessories Interfaces Routers, IC DAI VIS, -STAT Gateways IOB IX ROC WEB, STUDIO Functions Programmable DAI Controller Specifications Type Dimensions (mm) 159 x 100 x 75 ( x W x H), DIM035 Installation DI rail mounting following DI 43880, top hat rail E Power supply Operating conditions DAI channels 4 Interfaces VAC DAI 3 DAI 2 DAI 1 POWER Input VAC 50/60 Hz DA2+ DA2- DAI 2 OUTPUT x DA3+ DA3- DAI 3 DAI-RM3 Relay Module DA4+ DA4- -DAI Power Supply DAI-PWR4-U V AC, 50/ 60 Hz 0 C to 40 C, % RH, non condensing, degree of protection: IP40, IP20 (terminals) 2 x Ethernet (100Base-T): OPC XM DA, OPC UA, onmark IP 852, BACnet/ IP*, IOB IP, KXnet/ IP, Modbus TCP (Master or Slave), HTTP, FTP, SSH, HTTPS, Firewall, VC, SMP * Either BACnet/ IP or BACnet MS/ TP PWR DAI-PC4 RS-485 DA1 DA2 DA3 DA VAC USB 2 50/60Hz USB 1 DAI 1 Ethernet 2 Ethernet 1 DAI 3 DAI 2 IP-852 or BACnet DA1+ DA1- DAI 1 status -DAI Programmable ighting Controller RS-485 GD + - BACnet MS/TP or Modbus RTU (-STAT) SMI VAC 50/60 Hz SMI POWER O/OFF SMI 1 SMI 2 SMI 3 SMI 4 DO1 DO1 DO2 DO2 DO3 DO3 DO4 DO4 16 motors 16 motors 16 motors 16 motors I+ I+ I+ I+ I- I- I- I- SMI 1 SMI 2 SMI 3 SMI 4 -SMI SMI Interface 1 x RS 485 (ASI TIA/ EIA 485): BACnet MS/ TP*, or Modbus RTU (-STAT only) 2 x USB-A: WA (needs WA 800), EnOcean (needs EO 80x) SMI (needs SMI-804) USB 128

5 Resource limits Total number of data points onmark Alarm Servers 1 OPC data points templates 100 BACnet objects (analog, binary, multi-state) Math objects 100 BACnet client mappings Alarm logs 10 BACnet calendar objects 25 KXnet/ IP data points BACnet scheduler objects 100 (64 data points per object) Connections (ocal / Global) / 250 BACnet notification classes 32 umber of WEB clients 32 (simultaneously) Trend logs (BACnet or generic) 512 ( entries, 60 MB) IOB I/ O Modules 24 Total trended data points umber of EnOcean devices 100 CEA 709 network variables (Vs) EnOcean data points CEA 709 Alias Vs DAI Channels 4 CEA 709 External Vs (polling) DAI Ballasts per channel 64 CEA 709 address table entries (non-ecs mode: 15) DAI Groups per channel 16 onmark Calendars 1 (25 calendar patterns) DAI Sensors per channel 16 onmark Schedulers 100 DAI Buttons per channel 64 Order number DAI PWR2-U DAI PWR4-U DAI MS1 DAI MS2 DAI BM1 DAI BM2 DAI RM1 DAI RM2 DAI RM3 DAI RM4 EO 800 EO 801 EO 802 WA 800 STAT 800 G3-x STAT-801 G3-x STAT 802 G3-x STAT 800 G3-20x STAT-801 G3-20x STAT 802 G3-20x STAT-80x-CUSTOM SMI-804 Product description Freely programmable DAI Controller, 4 DAI channels DAI power supply unit for 2 DAI channels DAI power supply unit for 4 DAI channels DAI multi-sensor (motion detection, brightness sensor, IR sensor) DAI multi-sensor (presence detection, lux sensor, IR receiver, temperature sensor, humidity sensor, 3 digital inputs) Quadruple DAI pushbutton coupler Quadruple DAI pushbutton coupler DAI Relay Module 8 A DAI Relay Module 8 A, Analog Interface 1 10 V DAI Relay Module 10 A, Analog Interface 0 10 V and 1 10 V DAI Relay Module 10 A, Analog Interface 0 10 V and 1 10 V, spud-mount EnOcean Interface 868 MHz Europe EnOcean Interface 902 MHz USA/Canada EnOcean Interface 928 MHz Japan Wireless A Interface IEEE bgn etwork Thermostat, black front, white enclosure, Modbus, FC, temperature, rel. humidity, ext. switch/tc, IR receiver, Buttons (x) etwork Thermostat, front black, white enclosure, Modbus, FC, temperature, rel. humidity, ext. switch/tc, occupancy, IR receiver, Buttons (x) etwork Thermostat, front black, white enclosure, Modbus, FC, temperature, rel. humidity, ext. switch/tc, occupancy, IR receiver, CO2, Buttons (x) etwork Thermostat, white front, white enclosure, Modbus, FC, temperature, rel. humidity, ext. switch/tc, IR receiver, Buttons (x) etwork Thermostat, white front, white enclosure, Modbus, FC, temperature, rel. humidity, ext. switch/tc, occupancy, IR receiver, Buttons (x) etwork Thermostat, white front, white enclosure, Modbus, FC, temperature, rel. humidity, ext. switch/tc, occupancy, IR receiver, CO2, Buttons (x) Customized etwork Thermostat, minimum quantity 100 pieces, enclosure G2: black, G3: white; custom print x, including 2 working samples, lead time 10 weeks Standard Motor Interface for 64 motors, 4 SMI channels via USB Programmable DAI Controller Functions WEB, STUDIO ROC IX IOB Gateways VIS, -STAT DAI Routers, IC Interfaces Accessories buildings under control 129

6 Accessories Interfaces Routers, IC DAI VIS, -STAT Gateways IOB IX ROC WEB, STUDIO Functions Dimensions of the devices in mm and [inch] DIM035 DAI 3E101-U DAI 3E102-U DAI 3E104-U DAI ME201-U DAI ME204-U PWR VAC USB 2 50/60Hz USB 1 DAI 1 Ethernet 2 Ethernet 1 DAI 2 DAI 3 DA1 159 [6.260] 164 [6.457] DA2 DA3 DA+ DA- DA4 status -DAI DAI Controller [.591] [.512] 60 [2.362] [3.504] [3.937] SCAE 1 : mm