Overview. Integrated fail-safe mode in case of communication or power failure to comply with most regulation requirements

Size: px

Start display at page:

Download "Overview. Integrated fail-safe mode in case of communication or power failure to comply with most regulation requirements"

Verity Moody
5 years ago
Views:

Datasheet Lighting and Sunblind Expansion Modules Overview Applications When connected to any compatible HVAC programmable controller, the ECx-Light/Blind expansion modules allow to control up to 8

1 Datasheet Lighting and Sunblind Expansion Modules Overview Applications When connected to any compatible HVAC programmable controller, the ECx-Light/Blind expansion modules allow to control up to 8 lights and 8 shade / sunblind motors, creating a unique Integrated Room Control solution (IRC): On/Off lighting Light dimming Line-powered shades / sunblinds 24 VDC shades / sunblinds Improves energy efficiency when combined with the EC-Multi-Sensor: Motion detectors to automatically adjust a zone s occupancy mode from standby to occupied when presence is detected. Luminosity sensor to adjust the necessary light power to the actual luminosity in the room. The ECx-Light/Blind Expansion Modules are microprocessor-based interfaces that extend the number of inputs and outputs provided by the ECL/ECB-PTU Series controllers as well as ECL/ECB-VAV controllers. When connected to one of these HVAC programmable controller, these expansion modules enable to control up to 8 lighting loads and 8 motorised shades / sunblinds, creating a unique Integrated Room Control Solution (IRC). The ECx-Light/Blind Expansion Modules operate off of a separate sub-network bus (governed by the main HVAC controller). This optimizes the control possibilities while allowing such a modular solution (HVAC controller + expansion modules) to be interpreted as a single device by the network, thereby avoiding unnecessary system overloading. In addition, positioning the expansion modules directly in ceilings, close to the lightings or shade / sunblind motors, as well as its straightforward connection to the main HVAC controller through a single RJ45 cable, reduces installation and wiring costs while lessening risks of errors. Moreover, due to their dedicated power supply (depending on the model), the ECx-Light/Blind expansion modules consumption can easily be monitored, allowing the supervisor to instantly detect abnormal power usage and anticipate bulb maintenance as part of a proactive preventive maintenance program. Custom program ECx-Light/Blind expansion modules directly when configuring the main HVAC controller using EC-gfxProgram. This allows you to quickly and easily create your own control sequences capable of meeting the most demanding requirements of any engineering specification. Features & Benefits A wide range of lighting and shade / sunblind expansion modules that enables smart cross-management of HVAC, lighting, and shades / sunblinds as a whole The main HVAC controller and its associated expansion modules form a single device on the network that reduces network traffic and facilitates BMS integration Separate power supply allowing for dedicated metering leading to more accurate energy consumption analysis (depending on the model) Integrated fail-safe mode in case of communication or power failure to comply with most regulation requirements The ECx-Blind-4LV model has a 24 VDC power supply that can eliminate the need for an external power supply to power the shade / sunblind. Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time Quick-link connectors for direct installation into the ceilings, or traditional detachable connectors for use with optional strain reliefs and terminal block covers. This may eliminate the need for a protective enclosure in some jurisdictions. Integrated digital inputs to interface with light or shade / sunblind switches, window contacts, etc /1

ECx-Light/Blind Expansion Modules Model ECx-Light-4 ECx-Light-4D ECx-Blind-4 ECx-Blind-4LV Digital Inputs 4 4 4 4 ON/OFF Light Outputs 4 4 Dimming Command Outputs (1-10 V) 4 Line-powered Shade /

2 ECx-Light/Blind Expansion Modules Model ECx-Light-4 ECx-Light-4D ECx-Blind-4 ECx-Blind-4LV Digital Inputs ON/OFF Light Outputs 4 4 Dimming Command Outputs (1-10 V) 4 Line-powered Shade / Sunblind Outputs 4 24 VDC Shade / Sunblind Outputs 4 24 VDC Power Supply Outputs Internal electronics supplied by the host controller Available versions 1 : -WD, VAC power supply -ST, VAC power supply -STP, VAC power supply 1. -WD versions use quick-link connectors. -ST and -STP versions use traditional detachable connectors. -STP versions are not CE certified. To specify the version, simply add the version suffix after the module s name (i.e : an ECx-Light-4D in -WD versions is an ECx-Light-4D-WD). Required External Connectors Model Supplier Type ECx-Light-4-WD ECx-Light-4-ST ECx-Light-4-STP ECx-Light-4D-WD Female connector with strain relief GST15I3S B1 ZR1W WS - 3 poles - marked L G N Connector Reference Number Use Provided Power supply - Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Digital inputs Male connector with strain relief GST15I3S S1 ZR1W WS- 3 poles - marked L G N Female connector, pitch 5,08 mm, - 3 poles - marked 1 to Light outputs - Power supply & Light outputs Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Digital inputs Female connector with strain relief GST15I3S B1 ZR1W WS - 3 poles - marked L G N Power supply - Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Digital inputs Male connector with strain relief GST15I3S S1 ZR1W WS- 3 poles - marked L G N Light outputs - Female connector, pitch 5,08 mm, - 4 poles - marked 1 to V light command Female connector, pitch 5,08 mm, - 4 poles - marked 1 to V light command ECx-Light-4D-ST ECx-Light-4D-STP ECx-Blind-4-WD ECx-Blind-4-ST ECx-Blind-4LV-WD ECx-Blind-4LV-ST Female connector, pitch 5,08 mm, - 3 poles - marked 1 to Power supply & Light outputs Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Digital inputs Female connector with strain relief GST15I3S B1 ZR1W WS - 3 poles - marked L G N Power supply Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Digital inputs Male connector with strain relief GST15I4S S1 ZW1V WS - 4 poles - marked N G Shade / sunblind outputs Female connector, pitch 5,08 mm, - 3 poles - marked 1 to Power supply Female connector, pitch 5,08 mm, - 4 poles - marked 1 to Shade / sunblind outputs Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Digital inputs Female connector with strain relief GST15I3S B1 ZR1W WS - 3 poles - marked L G N Power supply Female connector, pitch 5,08 mm, - 4 poles - marked 1 to Motor outputs Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Motor/24VDC outputs & digital inputs Female connector, pitch 5,08 mm, - 3 poles - marked 1 to Power supply Female connector, pitch 5,08 mm, - 4 poles - marked 1 to Motor outputs Female connector, pitch 5,08 mm, - 6 poles - marked 1 to Motor/24VDC outputs & digital inputs /10

Subnetwork Overview The Integrated Room Control Solution combines a main HVAC Controller with expansion modules dedicated to lighting and sunblind management to form a modular solution that uses a

3 Subnetwork Overview The Integrated Room Control Solution combines a main HVAC Controller with expansion modules dedicated to lighting and sunblind management to form a modular solution that uses a single point on the network. LON or BACnet Network The main HVAC controller centralizes the information received from the subnetwork and sends the appropriate commands to the HVAC system and to the different expansion modules. The expansion modules execute lighting and/or sunblind commands received from the main HVAC controller, to which they transmit the information coming from the accessories shown below. The accessories send the needed information on the subnetwork (temperature, luminosity, occupancy, lighting commands, sunblind commands,...) and provide a user interface. 3/10

Complementary Products External Connectors Line of required external connectors Allure EC-Smart-Vue Series Line of communicating room temperature sensors with communication jack, a

Models are available with any combination of the following options: humidity sensor, motion sensor, and CO 2 sensor.

Models are available with the following options: communication jack, occupancy override button, setpoint adjustment, and fan speed selection.

Models are available with the following options: occupancy override button, setpoint adjustment, and fan speed selection. These sensors are available in EnOcean 315 MHz and 868.

Models are available with presence detection, light sensor, temperature sensor, and infrared receiver.

4 Complementary Products External Connectors Line of required external connectors Allure EC-Smart-Vue Series Line of communicating room temperature sensors with communication jack, a backlit-display and configurable graphic menus that allow occupants to set occupancy, setpoint adjustment, fan speed, or any other system parameters. Models are available with any combination of the following options: humidity sensor, motion sensor, and CO 2 sensor. The ECO-Vue icon shows how environmentally-friendly the zone s energy consumption is in real time. Allure EC-Sensor Series Line of discrete temperature sensors. Models are available with the following options: communication jack, occupancy override button, setpoint adjustment, and fan speed selection. Allure Wireless Battery-less ECW-Sensor Series Line of wireless, battery-less room temperature sensors. Models are available with the following options: occupancy override button, setpoint adjustment, and fan speed selection. These sensors are available in EnOcean 315 MHz and MHz versions. The controller must be equipped with a Wireless Receiver. EC-Multi-Sensor Series Line of in-ceiling multi-sensors. Models are available with presence detection, light sensor, temperature sensor, and infrared receiver. Wireless Sensors and Switches A wide range of self-powered wireless sensors and switches, including the following: Motion detector and light sensor, 2-/4-channel wireless light switches (North American and European models), outdoor temperature sensor, surface temperature contact sensor, duct temperature sensor, and more. These sensors are available in EnOcean 315 MHz and MHz versions. The controller must be equipped with a Wireless Receiver. For more information about the available wireless sensors and switches, refer to the Open-to-Wireless Solution Guide which can be found on our web site. 4/10

5 ECx-Light-4 Dimensions 132 (5.2) 44 (1.7) 132 (5.2) 44 (1.7) 132 (5.2) 182 (7.2) mm (inches) ECx-Light-4 Specifications Power Voltage -WD and -ST models : VAC; -15%/+10%; 50/60 Hz; -STP models VAC; -15%/+10%; 50/60 Hz; Only to power light outputs. The module is powered via the subnetwork. Protection 6.0 A external circuit breaker type C (250 VAC min) Typical Power Consumption 0.3 W plus all external loads Maximum Power Consumption 6.0 A Overvoltage Category II kv Hardware Processor CPU Speed Memory Status Indicator Environmental STM32 (ARM Cortex M3) MCU, 32 bit 36 MHz 32 kb Non-volatile Flash 6 kb SRAM Green LEDs: Device & Power Status, LAN Tx & Rx Operating Temperature +5 C to +40 C (41 F to 104 F) Storage Temperature -20 C to 70 C (-4 F to 158 F) Relative Humidity +20 to 90% Non-condensing Altitude < 2000 m Pollution Degree 2 Enclosure Material Color Dimensions - with terminal block covers Shipping Weight IP -WD models -ST and -STP models without terminal block covers and strain relief ABS type PA-765A Blue casing & grey connectors mm ( ) mm ( ) 0.36 kg (0.79 lbs) when equipped with strain relief and terminal block cover Installation Direct din-rail mounting or wall-mounting - Refer to the Hardware Installation Guide for more information Inputs 2 Digital Inputs (DI1, DI2, DI3, DI4) Outputs with terminal block covers and strain relief Subnetwork Communication Cable Connector Topology Light Outputs (LIGHT1, LIGHT2, LIGHT3, LIGHT4) Standards and Regulation 3 Dry Contact VDC High inrush current bistable relay for lower power consumption. Same voltage as power supply A max. on an inductive load A max. total for the 4 outputs - Inrush current 80.0 A max. (< 20 ms) CE - Emission 4 IEC : A1: ed.2010 Generic standards for residential, commercial and light-industrial environments CE - Immunity 4 IEC : 2005; Generic standards for residential, commercial and light-industrial environments FCC This device complies with FCC rules part 15, subpart B, class B UL Listed (CDN & US) UL Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/28 Material 5 CE - Electrical Safety (Approved by an external Lab) RS-485 Cat 5e, 8 conductor twisted pair RJ-45 Daisy-chain configuration CSA C22.2 NO Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/01 File number: E UL94-5VB EN : Automatic electrical controls for household and similar use - Part 1: General requirements 1. ECL-PTU Series and ECB-PTU Series controllers support 2 ECx-Light + 2 ECx-Blind, in daisy-chain configuration. For ECL-VAV and ECB-VAV controllers: The permitted quantities of supported ECx-Light/Blind expansion modules can be found by using the room device calculator spreadsheet, which is available for download from Distech Controls SmartSource: VAV-IRC Room Device Calculator.xlsm 2. SELV (Safety Extra Low Voltage) inputs/outputs. 3. -WD models can be directly mounted in false ceilings. -ST and -STP models must be mounted with strain reliefs and terminal block covers or in a junction box, as required to meet local safety regulations in your jurisdiction STP models are not CE certified. 5. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE) directive. 5/10

6 ECx-Light-4D Dimensions 132 (5.2) 44 (1.7) 132 (5.2) 44 (1.7) 132 (5.2) 182 (7.2) mm (inches) ECx-Light-4D Specifications Power Voltage -WD and -ST models : VAC; -15%/+10%; 50/60 Hz; -STP models VAC; -15%/+10%; 50/60 Hz; Only to power light outputs. The module is powered via the subnetwork. Protection 6.0 A external circuit breaker type C (250 VAC min) Typical Power Consumption 0.3 W plus all external loads Maximum Power Consumption 6.0 A Overvoltage Category II kv Hardware Processor CPU Speed Memory Status Indicator Environmental STM32 (ARM Cortex M3) MCU, 32 bit 36 MHz 32 kb Non-volatile Flash 6 kb SRAM Green LEDs: Device & Power Status, LAN Tx & Rx Operating Temperature +5 C to +40 C (41 F to 104 F) Storage Temperature -20 C to 70 C (-4 F to 158 F) Relative Humidity +20 to 90% Non-condensing Altitude < 2000 m Pollution Degree 2 Enclosure Material Color Dimensions - with terminal block covers Shipping Weight IP -WD models -ST and -STP models without terminal block covers and strain relief ABS type PA-765A Blue casing & grey connectors mm ( ) mm ( ) 0.36 kg (0.79 lbs) when equipped with strain relief and terminal block cover Installation Direct din-rail mounting or wall-mounting - Refer to the Hardware Installation Guide for more information Inputs 2 Digital Inputs (DI1, DI2, DI3, DI4) Outputs with terminal block covers and strain relief Subnetwork Communication Cable Connector Topology Light Outputs (LIGHT1, LIGHT2, LIGHT3, LIGHT4) Analog Outputs (AO1, AO2, AO3, AO4) Standards and Regulation 3 Dry Contact VDC Linear (1-10 VDC); Typically light dimming command - 5 ma max. CE - Emission 4 IEC : A1: ed.2010 Generic standards for residential, commercial and light-industrial environments CE - Immunity 4 IEC : 2005; Generic standards for residential, commercial and light-industrial environments FCC This device complies with FCC rules part 15, subpart B, class B UL Listed (CDN & US) UL Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/28 Material 5 CE - Electrical Safety (Approved by an external Lab) RS-485 Cat 5e, 8 conductor twisted pair RJ-45 Daisy-chain configuration High inrush current bistable relay for lower power consumption. Same voltage as power supply A max. on an inductive load A max. total for the 4 outputs - Inrush current 80.0 A max. (< 20 ms) CSA C22.2 NO Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/01 File number: E UL94-5VB EN : Automatic electrical controls for household and similar use - Part 1: General requirements 1. ECL-PTU Series and ECB-PTU Series controllers support 2 ECx-Light + 2 ECx-Blind, in daisy-chain configuration. For ECL-VAV and ECB-VAV controllers: The permitted quantities of supported ECx-Light/Blind expansion modules can be found by using the room device calculator spreadsheet, which is available for download from Distech Controls SmartSource: VAV-IRC Room Device Calculator.xlsm 2. SELV (Safety Extra Low Voltage) inputs/outputs. 3. -WD models can be directly mounted in false ceilings. -ST and -STP models must be mounted with strain reliefs and terminal block covers or in a junction box, as required to meet local safety regulations in your jurisdiction. 4. -STP models are not CE certified. 5. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE) directive. 6/10

7 ECx-Blind-4 Dimensions 132 (5.2) 44 (1.7) 132 (5.2) 44 (1.7) 132 (5.2) 182 (7.2) mm (inches) ECx-Blind-4 Specifications Power Voltage Protection Typical Power Consumption Maximum Power Consumption Overvoltage Category Hardware Processor CPU Speed Memory Status Indicator Environmental VAC; -15%/+10%; 50/60 Hz; 8.0 A external circuit breaker type C (250 VAC min) or 8.0 fast acting, high breaking fuse (250 VAC min) 0.3 W typical on the RJ45 Link + all external loads 8.0 A II kv STM32 (ARM Cortex M3) MCU, 32 bit 36 MHz 32 kb Non-volatile Flash 6 kb SRAM Green LEDs: Device & Power Status, LAN Tx & Rx Operating Temperature +5 C to +40 C (41 F to 104 F) Storage Temperature -20 C to 70 C (-4 F to 158 F) Relative Humidity +20 to 90% Non-condensing Altitude < 2000 m Pollution Degree 2 Enclosure Material Color Dimensions - with terminal block covers Shipping Weight IP -WD models -ST models without terminal block covers and strain relief ABS type PA-765A Blue casing & grey connectors mm ( ) mm ( ) 0.35 kg (0.77 lbs) when equipped with strain relief and terminal block cover Installation Direct din-rail mounting or wall-mounting - Refer to the Hardware Installation Guide for more information Inputs 2 Digital Inputs (DI1, DI2, DI3, DI4) Outputs with terminal block covers and strain relief Subnetwork Communication Cable Connector Topology Shade / sunblind Outputs (BLIND1, BLIND2; BLIND3, BLIND4) Standards and Regulation 3 Dry Contact VDC Same voltage as power supply 2.0 A max (inductive or resistive load) Current Peak 4 A max < 20ms 1 : Shade / sunblind UP command 2 : Shade / sunblind DOWN command CE - Emission IEC : A1: ed.2010 Generic standards for residential, commercial and light-industrial environments CE - Immunity IEC : 2005; Generic standards for residential, commercial and light-industrial environments FCC This device complies with FCC rules part 15, subpart B, class B UL Listed (CDN & US) UL Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/28 Material 4 CE - Electrical Safety (Approved by an external Lab) RS-485 Cat 5e, 8 conductor twisted pair RJ-45 Daisy-chain configuration CSA C22.2 NO Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/01 File number: E UL94-5VB EN : Automatic electrical controls for household and similar use - Part 1: General requirements 1. ECL-PTU Series and ECB-PTU Series controllers support 2 ECx-Light + 2 ECx-Blind, in daisy-chain configuration. For ECL-VAV and ECB-VAV controllers: The permitted quantities of supported ECx-Light/Blind expansion modules can be found by using the room device calculator spreadsheet, which is available for download from Distech Controls SmartSource: VAV-IRC Room Device Calculator.xlsm 2. SELV (Safety Extra Low Voltage) inputs/outputs. 3. -WD models can be directly mounted in false ceilings. -ST models must be mounted with strain reliefs and terminal block covers or in a junction box, as required to meet local safety regulations in your jurisdiction. 4. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE) directive. 7/10

8 ECx-Blind-4LV Dimensions 132 (5.2) 44 (1.7) 132 (5.2) 44 (1.7) 132 (5.2) 182 (7.2) mm (inches) ECx-Blind-4LV Specifications Power Voltage Protection Typical Power Consumption Maximum Power Consumption Overvoltage Category Hardware Processor CPU Speed Memory Status Indicator Environmental VAC; -15%/+10%; 50/60 Hz; 2.0 A external circuit breaker type C or 2.0 A fast acting high breaking external fuse (250 VAC min) < 1 W plus all external loads 1.2 A II kv STM32 (ARM Cortex M3) MCU, 32 bit 36 MHz 32 kb Non-volatile Flash 6 kb SRAM Green LEDs: Device & Power Status, LAN Tx & Rx Operating Temperature +5 C to +40 C (41 F to 104 F) Storage Temperature -20 C to 70 C (-4 F to 158 F) Relative Humidity +20 to 90% Non-condensing Altitude < 2000 m Pollution Degree 2 On-Board 24 VDC Power Supply Use Used to power both shade / sunblind outputs and 24 VDC outputs Voltage 2 24 VDC; ±10% Current 2.0 A max. in aggregate (48 24 VDC) Protection Short-circuit protected Enclosure Material Color Dimensions - with terminal block covers Shipping Weight IP -WD models -ST models without terminal block covers and strain relief ABS type PA-765A Blue casing & grey connectors mm ( ) mm ( ) 0.36 kg (0.79 lbs) when equipped with strain relief and terminal block cover Installation Direct din-rail mounting or wall-mounting - Refer to the Hardware Installation Guide for more information Inputs 2 Digital Inputs (DI1, DI2, DI3, DI4) Outputs 2 with terminal block covers and strain relief Subnetwork Communication Cable Connector Topology Shade / sunblind Outputs (M1+, M1-; M2+, M2-, M3+, M3-, M4+, M4-) Standards and Regulation 3 Dry Contact VDC CE - Emission IEC : A1: ed.2010 Generic standards for residential, commercial and light-industrial environments CE - Immunity IEC : 2005; Generic standards for residential, commercial and light-industrial environments FCC This device complies with FCC rules part 15, subpart B, class B UL Listed (CDN & US) UL Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/28 Material 4 CE - Electrical Safety (Approved by an external Lab) RS-485 Cat 5e, 8 conductor twisted pair RJ-45 Daisy-chain configuration 24 VDC (see on-board power supply for more specifications) Mx+ Shade / sunblind UP command Mx- Shade / sunblind DOWN command 1 A max. per output 24 VDC Outputs 24 VDC on-board generated (see on-board power supply for more specifications) CSA C22.2 NO Safety Requirements For Electrical Equipment For Measurement, Revision Date 2008/10/01 File number: E UL94-5VB EN : Automatic electrical controls for household and similar use - Part 1: General requirements 1. ECL-PTU Series and ECB-PTU Series controllers support 2 ECx-Light + 2 ECx-Blind, in daisy-chain configuration. For ECL-VAV and ECB-VAV controllers: The permitted quantities of supported ECx-Light/Blind expansion modules can be found by using the room device calculator spreadsheet, which is available for download from Distech Controls SmartSource: VAV-IRC Room Device Calculator.xlsm 2. SELV (Safety Extra Low Voltage) inputs/outputs. 3. -WD models can be directly mounted in false ceilings. -ST models must be mounted with strain reliefs and terminal block covers or in a junction box, as required to meet local safety regulations in your jurisdiction. 4. All materials and manufacturing processes comply with the RoHS directive and are marked according to the Waste Electrical and Electronic Equipment (WEEE) directive. 8/10

9 9/10

10 Total Quality Commitment All Distech Controls product lines are built to meet rigorous quality standards. Distech Controls is an ISO 9001 registered company., Copyright Distech Controls Inc., All rights reserved. Specifications subject to change without notice. Distech Controls, the Distech Controls logo, Open-to-Wireless, ECO-Vue, Allure and EC-Net AX are trademarks of Distech Controls Inc; LonWorks, LON, LonMark, LNS, LonTalk are registered trademarks of Echelon Corporation; BACnet is a registered trademark of ASHRAE; Niagara AX Framework is a registered trademark of Tridium, Inc.; ARM Cortex is a registered trademark of ARM Limited. EnOcean is a registered trademark of EnOcean GmbH. All other trademarks are property of their respective owners. 10/10 05DI-DSECXXX-11 05DI-DSECXXX-11

Overview. Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time.

Overview. Seen as an extension of the main HVAC controller when configuring, allowing you to save engineering time. Datasheet Shades / Sunblinds Expansion Modules Overview Applications 100-240 VAC shades / sunblinds 24 VDC shades / sunblinds The Expansion Modules are microprocessor-based interfaces that extend the number