Opterna. FTTx Product Guide.

Transcription

1 Opterna FTTx Product Guide

2 Opterna is a US-based opto-electronic product company established in Opterna has manufacturing facilities and sales and support offices in the U.S, Europe, Asia-Pacific, the Middle East and Latin America. Opterna s vertically integrated structure enables it to combine components into customized solutions, ranging from modular components to systems. The company has a strong technical base with an emphasis on quality, reliability and high volume manufacturing. Opterna s growth strategy focuses on the following products: Fiber Interconnect Products Passive Optical Systems Data Center Products Smart Developments / Smart Buildings Smart Solutions for the Internet of Things Complete End-to-End Solutions for Developers

3 Table of Contents MDU/MTU/SFU Solutions...4 BuildOpt Terminal Plate (TPA)...6 BuildOpt Micro Terminal... 8 BuildOpt Mini Terminal...12 BuildOpt Collector Plate Assembly (CPA) BuildOpt MT Collector Assembly (MTCA)...16 BuildOpt Collector/Terminal Plate Assembly (CTP)...18 Terminal Access Box (TAB) Fiber Distribution Box (FDB)...22 Optical Distribution Box (ODB)...24 OSP Solutions...27 TurnOpt Fiber Distribution Hub...28 Outdoor FTTx Demarc (DOpt)...32 Copyright 2017, Opterna, Inc. All rights reserved. No part of this document may be copied, reproduced, or transmitted in any form or by any means without the prior written permission of Opterna. The Opterna name and logo are registered trademarks of Opterna Technology Limited. 1

4 Solutions for FTTx Applications CTP TPA Mini Terminal MFDH 2

5 CPA MTCA 3

6 MDU Solutions Opterna s BuildOpt product series is optimized to efficiently and cost-effectively provide for connectivity to small, medium and high-rise Multi-Dwelling Units (MDUs). BuildOpt can also be paired with TurnOpt and FDB Series fiber distribution hubs and TAB Series terminal access boxes for trunk/feeder cable requirements. Field-proven plug-and-play technology Lowest loss connector technology Patented cable slack storage Patented splitter technology 4

7 MTU, SFU Solutions Opterna s FDB, TAB, OSB and ODB products are optimized to efficiently provide FTTx connectivity to commercial and residential Multi-Tenant Units (MTUs), Single Family Units (SFUs), and Campus MDUs. TAB, OSB and ODB products can also be paired with TurnOpt fiber distribution hubs for fiber trunk requirements. Field proven plug-and-play technology Telcordia certified SC and LC connectors Patented splitter technology 5

8 BuildOpt Terminal Plate Assembly MDU The BuildOpt Terminal Plate (TPA) is an innovative solution for fiber distribution to living units in a Multi-Family Dwelling Unit environment. The BuildOpt TPA features a plate-mounted rotating spool, on which the fiber tail and fiber cable slack are stored. After mounting the TPA, the installer simply unlocks the spool and pays out the desired length of fiber tail, utilizing the supplied pulling eye. The pre-terminated tail can then connect to an Opterna Collector Plate or Collector/Terminal Plate. The TPA may also connect directly to Opterna s TurnOpt FDH. TPA models are available with one or two 12-fiber tails having standard stub lengths of 100, 200, or 350 feet. User-defined lengths are also available. The 12-fiber TPA can store one tail up to 400 feet in length. The 24-fiber TPA can store two tails up to 200 feet in length. Each 12-fiber tail is terminated with a low loss 12-fiber female MPO connector. Drop cables up to 4.8mm in size are supported. Features Designed for MDU applications Innovative rotating fiber storage spool One or two 12-fiber MT connector tails, supports 12 or 24 drops 100, 200 and 350 stub lengths Supports up to 4.8mm cables and splice on connectors Wall-mount design Convenient pulling-eye included with each MT-connector Grounding connection included 6

9 BuildOpt Terminal Plate Assembly MDU Specifications Parameter Cable type Fiber type Connector Insertion Loss Return Loss Plate Material Dimensions Listings 12f flat ribbon riser G.657.B3 bend insensitive single mode 0.3 db > 65dB Metal 11.4 x 11.4 x 5.7 inches / 290 x 290 x 145 mm UL, cul Ordering Information Part Number Subscriber Ports Tail Length Slack Storage ADTPA-1SAFM SC/APC 100 Feet 400 Feet ADTPA-1SAFM SC/APC 200 Feet 400 Feet ADTPA-1SAFM SC/APC 350 Feet 400 Feet ADTPA-1SAFM-xxx 12 SC/APC User Defined 400 Feet ADTPB-1SAFM SC/APC 100 Feet 200 Feet ADTPB-1SAFM SC/APC 200 Feet 200 Feet ADTPB-1SAFM SC/APC 350 Feet 200 Feet ADTPB-1SAFM-xxx 24 SC/APC User Defined 200 Feet xxx = User Defined Length in Feet 032 = 32 feet 050 = 50 feet 065 = 65 feet 100 = 100 feet 150 = 150 feet 200 = 200 feet 250 = 250 feet 300 = 300 feet 350 = 350 feet 400 = 400 feet 450 = 450 feet 500 = 500 feet 7

10 Micro Terminal MDU The Micro Terminal contains a long, durable pre-terminated fiber jumper that is packaged in a palm-sized, all-plastic enclosure having built-in fiber adapters and slack storage. The fiber pays out easily from the Micro Terminal for routing back to the main terminal. Once the fiber is routed, the excess fiber slack is reeled back into the Micro Terminal for easy and convenient storage. The Micro Terminal can be ordered with 1xSC Simplex, 2xSC Simplex, 1xLC Duplex, or 2xLC Duplex connectors and adapters for your fiber application. It comes with a convenient Desktop Mounting Bracket that can be used to mount the Micro Terminal onto any flat surface (upside down or right side up in any direction.) It also comes with a Wall Mounting Plate that allows the Micro Terminal to install directly over any single-gang or double-gang outlet box or mud ring. The fiber routes conveniently behind the Wall Mounting Plate into existing conduit. Features Palm-sized, all-plastic Micro Terminal with built-in slack storage (up to 65 feet (20 meters) or 2mm fiber) Pre-terminated fiber solution with user-defined cable lengths up to 450 feet 1 port and 2 port version using SC Simplex or LC Duplex Connectors and Adapters 2xSC Simplex; 1xLC and 2xLC Duplex connectors protected with a pulling sock for easy installation Desktop and Wall Mount Brackets come with each Micro Terminal (Stud Mounting Options available) Fiber Routing Kit available with inside/outside/ flat corner bend limiters and continuous straight extrusion for routing fiber along exposed flat surfaces Riser, Plenum and Rugged LSZH cabling available for fiber routing through conduit pathways or in cable trays Smooth Ivory White finish with 94V-0 ABS pastic material 8

11 Micro Terminal MDU Dimensions Ordering Information OSB Adapter Port Count Adapter Port Type Cable Length Cable Sheathing Connector end face type 1P - 1 Port Pre-terminated SC - SC Simplex 50-50ft ML - M2fx LSZH APC - For APC 2P - 2 Port Pre-terminated LD - LC Duplex ft MR - M2fx Riser UPC - For UPC ft P - Plenum PC - For PC ft R - Riser ft ft ft ft ft Note: 450ft is the longest allowable length in the current configuration 9

12 Micro Terminal MDU Standard Accessories Desktop Mounting Direct Mounting Optional Accessories Mounting Face Trim Plate & Mount Bracket 10

13 MDU Micro Terminal Fiber Routing Accessories Inside Corner Fiber Router Flat Corner Fiber Router - Right Flat Corner Fiber Router - Left Outside Corner Fiber Router Fiber Routing Extrusion Part Number Product Contents OSB-AC-MICRO-SMK Stud Mount Kit Stud Mounting Bracket Trim Faceplate OSB-AC-MICRO-FRK Fiber Routing Kit Inside Corner(6) Outside Corner(6) Flat Corner Left(6) Flat Corner Right(6) OSB-AC-MICRO-FRE Fiber routing Extrusion Flexible Extrusion 65 feet (20 meters) 11

14 Mini Terminal MDU The Mini Terminal is a miniature, all-plastic version of Opterna s patented BuildOpt Terminal Plate Assembly, optimized for accepting drop cables from living units or commercial units in smaller Multiple Tenant Unit (MTU) or Multiple Dwelling Unit (MDU) applications. It s a small but versatile plug-and-play fiber distribution solution for MTU, MDU or generic FTTx applications. The Mini-Terminal supports four configurations with user-defined lengths: MINI-0: Fiber SM MPO Solution with Dual 6F Splice Trays. MINI-1: 12 Fiber SM MPO Solution with a 12 Port SC/APC Panel. MINI-3: 1 Fiber SM Solution containing a 1x8 splitter with 8 SC/APC ports. MINI-4: 2 Fiber SM Solution containing a 2x1x4 splitter with 8 SC/APC ports. The Mini-Terminal features a removable rotating spool on which the fiber tail and fiber cable slack are stored. The base mounts onto any flat surface and the spool pays out the desired length of fiber. The spool locks onto the base to prevent additional rotation after payout and slack storage. The pre-terminated 12-fiber MPO fiber tail can be connected to any number of fiber products including the Opterna TurnOpt Collector Plate, Collector/Terminal Plate, or MT Collector Assembly, or to the Opterna TurnOpt Fiber Distribution Hub. The pre-terminated 1 or 2 Fiber SC/APC tail can be connected to any number of terminals after routing down a hallway, riser or conduit pathway. Features All-plastic design for mounting onto any flat surface!f, 2F, or 12F pre-terminated fiber tails supporting 8 or 12 drops Craft-friendly entry points for living unit drop cables Simple docking mechanism to lock the cable spool at desired position Innovative rotating fiber spindle for easy spool rotation during cable pay out and reel in User-defined fiber tail lengths with pulling-eye(s) or pulling socks provided Rugged cabling for pulling through conduits or installing in cable trays Removable Cover and Removable Adapters for easy access to all fiber ports 12

15 Mini Terminal MDU Specifications Family Mini Terminal SC Ports LC Ports Fibers Splitters Dimensions Mini-0 Mini-Terminal 12-Fiber Dual Splice Tray Mini-1 Mini-Terminal 12-Port 1xMPO to SC Panel Mini-3 Mini-Terminal 1x8 Splitter Cassette Mini-4 Mini-Terminal 2x1x4 Splitter Cassette Dimensions 6.9 x 6.9 x 3.3 (HxWxD) inches 6.9 x 6.9 x 3.3 (HxWxD) inches 6.9 x 6.9 x 3.3 (HxWxD) inches 6.9 x 6.9 x 3.3 (HxWxD) inches Ordering Information Part Number Type of Mini Terminal Cable Length Fiber Type Connector Finish MINI-0 12 Fiber 1x12F Round MPO with Dual 6F Splice Trays 50-50ft R - Riser APC - For APC MINI-1 12 Port 1x12F Ribbon MPO with 12x SC/APC ft P - Plenum UPC - For UPC MINI-3 8 Port 1x8 Splitter Cassette with 8x SC/APC ft MR - MiniFlex Riser MINI-4 8 Port 2x1x4 Splitter Cassette with 8x SC/APC ft MR - MiniFlex LSZH ft ft ft ft ft 12-Fiber MiniTerminal with Splice Tray 8-Port MiniTerminal with Splitter Module 12-Port MiniTerminal with Adapter holder 13

16 BuildOpt Collector Plate Assembly MDU The BuildOpt Collector Plate Assembly (CPA) is an integral component of Opterna s fiber connectivity system. The BuildOpt CPA provides an integration point between the TurnOpt Fiber Distribution Hub and the BuildOpt Terminal Plate, enabling a zone or distribution network design for MDUs. The CPA features a bend-insensitive fiber cable stub that is pre-terminated with six or twelve 12-fiber MPO connectors. Riser-rated or Indoor/Outdoor cable stubs options are available in 100, 200 and 350 lengths. User-defined lengths are also available. The CPA includes a ground connection, four mounting holes and a mounting template/installation guide. Features Six or twelve pre-terminated 12-fiber MPO connectors 100, 200 and 350 stub lengths Riser and Indoor/Outdoor cable stub options Low insertion/return loss connectors 72-fiber Cable Stub Diameter is 0.52 inches 144-fiber Cable Stub Diameter is 0.60 inches Grounding connection included 14

17 BuildOpt Collector Plate Assembly MDU Specifications Parameter 72-fiber model 144-fiber model Cable type 12-fiber ribbon, Riser or Indoor/Outdoor Fiber type G.657.A bend insensitive single mode Cable jacket diameter 0.52 inches 0.60 inches 12-fiber MPO Ports 6 12 Connector Insertion Loss 0.3 db Return Loss > 65dB Plate Material Metal Dimensions 10.5 x 9 x 3.5 inches / 265 x 227 x 89 mm Listings UL, cul (or cetl) Ordering Information Part Number Fiber Count Cable Type Cable Length AMCP6-1MMNC Fiber Riser-rated 100 Feet AMCP6-1MMNC Fiber Riser-rated 200 Feet AMCP6-1MMNC Fiber Riser-rated 350 Feet AMCP6-1MMNC-xxx 72 Fiber Riser-rated User Defined AMCP6-2MMNC Fiber Indoor/Outdoor 100 Feet AMCP6-2MMNC Fiber Indoor/Outdoor 200 Feet AMCP6-2MMNC Fiber Indoor/Outdoor 350 Feet AMCP6-2MMNC-xxx 72 Fiber Indoor/Outdoor User Defined AMCP12-1MMNC Fiber Riser-rated 100 Feet AMCP12-1MMNC Fiber Riser-rated 200 Feet AMCP12-1MMNC Fiber Riser-rated 350 Feet AMCP12-1MMNC-xxx 144 Fiber Riser-rated User Defined AMCP12-2MMNC Fiber Indoor/Outdoor 100 Feet AMCP12-2MMNC Fiber Indoor/Outdoor 200 Feet AMCP12-2MMNC Fiber Indoor/Outdoor 350 Feet AMCP12-2MMNC-xxx 144 Fiber Indoor/Outdoor User Defined xxx = User Defined Length in Feet 032 = 32 feet 050 = 50 feet 065 = 65 feet 100 = 100 feet 150 = 150 feet 200 = 200 feet 250 = 250 feet 300 = 300 feet 350 = 350 feet 400 = 400 feet 450 = 450 feet 500 = 500 feet 15

18 BuildOpt MT Collector Assembly MDU The BuildOpt MT Collector Assembly (MTCA) combines the features of a CPA in an optimized enclosure. The MTCA features a 72-fiber or a 96-fiber bend-insensitive fiber cable stub, preterminated with six or eight 12-fiber MT Connectors. Riser-rated or Indoor/Outdoor cable stubs are available in 100, 200 and 300 lengths. User-defined lengths are also available. The rugged metal enclosure includes watertight seals and glands to protect the internal connections. Cable management features ensure proper retention and placement of the fiber cables. Exterior features on the MTCA enclosure include a grounding bolt, integral wallmount brackets and a door- locking tab with a padlock provision. Features Six or eight pre-terminated 12-fiber MT connectors 100, 200 and 300 stub lengths Rugged metal enclosure with locking provision Watertight construction Integral wall-mount brackets Low insertion/return loss connectors Grounding connection included 16

19 BuildOpt MT Collector Assembly MDU Specifications Parameter 72-fiber model 96-fiber model Cable type 12-fiber ribbon, Riser or Indoor/Outdoor Fiber type G.657.A bend insensitive single mode Cable jacket diameter 0.52 inches 12-fiber MPO Ports 6 8 Connector Insertion Loss 0.3 db Return Loss > 65dB Enclosure Material Steel Dimensions 8.8 x 8.8 x 4 inches / 225 x 225 x 102 mm Listings UL, cul (or cetl) Ordering Information Part Number Fiber Count Cable Type Cable Length AMCM6-1MMNC Fiber Riser-rated 100 Feet AMCM6-1MMNC Fiber Riser-rated 200 Feet AMCM6-1MMNC Fiber Riser-rated 300 Feet AMCM6-1MMNC-xxx 72 Fiber Riser-rated User Defined AMCM6-2MMNC Fiber Indoor/Outdoor 100 Feet AMCM6-2MMNC Fiber Indoor/Outdoor 200 Feet AMCM6-2MMNC Fiber Indoor/Outdoor 300 Feet AMCM6-2MMNC-xxx 72 Fiber Indoor/Outdoor User Defined AMCM8-1MMNC Fiber Riser-rated 100 Feet AMCM8-1MMNC Fiber Riser-rated 200 Feet AMCM8-1MMNC Fiber Riser-rated 300 Feet AMCM8-1MMNC-xxx 96 Fiber Riser-rated User Defined AMCM8-2MMNC Fiber Indoor/Outdoor 100 Feet AMCM8-2MMNC Fiber Indoor/Outdoor 200 Feet AMCM8-2MMNC Fiber Indoor/Outdoor 300 Feet AMCM8-2MMNC-xxx 96 Fiber Indoor/Outdoor User Defined xxx = User Defined Length in Feet 032 = 32 feet 050 = 50 feet 065 = 65 feet 100 = 100 feet 150 = 150 feet 200 = 200 feet 250 = 250 feet 300 = 300 feet 350 = 350 feet 400 = 400 feet 450 = 450 feet 500 = 500 feet 17

20 BuildOpt Collector/Terminal Plate MDU The BuildOpt Collector/Terminal Plate (CTP) combines the functionality of a Collector Plate and a Terminal Plate in one assembly. Two models are available; 72-fiber and a 144-fiber. Both models feature a terminal section that accommodates cable drops with diameters of up to 4.8mm. The 72-fiber model features 6 MT ports and 12 SC/APC ports. One MT port is dedicated to the adjacent 12 SC/APC ports, thereby allowing the flexibility of the remaining MTs to be utilized for connecting up to 5 additional TPAs. The 144-fiber model features 12 MT ports and 24 SC/APC ports. Two MT ports are dedicated to the adjacent 24 SC/APC ports thereby allowing the flexibility of the remaining MTs to be utilized for connecting up to 10 additional TPAs. Features Integrated collector and terminal functionality 100, 200 and 350 stub lengths Riser and Indoor/Outdoor cable stub options Low insertion/return loss connectors Grounding connection included 72-fiber Model (6 each 12-fiber MT and 12 SC/APC connectors) 144-fiber Model (12 each 12-fiber MT and 24 SC/APC connectors) 18

21 BuildOpt Collector/Terminal Plate MDU Specifications Parameter 72-fiber model 144-fiber model Cable type 12-fiber ribbon, Riser or Indoor/Outdoor Fiber type G.657.A bend insensitive single mode Cable jacket diameter 0.52 inches 0.60 inches SC/APC Terminal Ports MPO ports available for other terminals 5 10 Connector Insertion Loss 0.3 db Return Loss > 65dB Plate Material Metal Dimensions 13 x 13 x 5 inches / 330 x 330 x 130 mm Listings UL, cul (or cetl) Ordering Information Part Number Fiber Count Cable Type Cable Length ACTP6-1MMNC Fiber Riser-rated 100 Feet ACTP6-1MMNC Fiber Riser-rated 200 Feet ACTP6-1MMNC Fiber Riser-rated 350 Feet ACTP6-1MMNC-xxx 72 Fiber Riser-rated User Defined ACTP6-2MMNC Fiber Indoor/Outdoor 100 Feet ACTP6-2MMNC Fiber Indoor/Outdoor 200 Feet ACTP6-2MMNC Fiber Indoor/Outdoor 350 Feet ACTP6-2MMNC-xxx 72 Fiber Indoor/Outdoor User Defined ACTP12-1MMNC Fiber Riser-rated 100 Feet ACTP12-1MMNC Fiber Riser-rated 200 Feet ACTP12-1MMNC Fiber Riser-rated 350 Feet ACTP12-1MMNC-xxx 144 Fiber Riser-rated User Defined ACTP12-2MMNC Fiber Indoor/Outdoor 100 Feet ACTP12-2MMNC Fiber Indoor/Outdoor 200 Feet ACTP12-2MMNC Fiber Indoor/Outdoor 350 Feet ACTP12-2MMNC-xxx 144 Fiber Indoor/Outdoor User Defined xxx = User Defined Length in Feet 032 = 32 feet 050 = 50 feet 065 = 65 feet 100 = 100 feet 150 = 150 feet 200 = 200 feet 250 = 250 feet 300 = 300 feet 350 = 350 feet 400 = 400 feet 450 = 450 feet 500 = 500 feet 19

22 Terminal Access Box (TAB) MTU, SFU Opterna s Terminal Access Box (TAB) Family offers low-cost fiber termination solutions that provide access for up to 24 fiber ports in two conveniently-sized boxes: TAB-12: 4, 8, or 12 Port Configurations in a traditional two-layer design having a rear splice area for cable slack and splice protection, and a front interconnect area for SC ports. Dimensions are 9.0H x 8.0W x 2.2D inches. TAB-24: 8, 16, or 24 Port Configurations in a simple single-layer design having all splicing and all interconnects under one cover (indoor applications only). Dimensions are 9.5H x 7.0W x 2.5D inches The TAB-12 is suitable for indoor or outdoor FTTx applications that support up to 12 subscribers. It has a compact, light-weight wall-mountable housing with a weatherproof gasket and three weatherproof cable entry/exit ports. It easily accommodates 1 or 2 splitters, 12 splices and 12 SC ports. The TAB-24 is a multi-purpose fiber terminal that can be pre-terminated or splice ready for 1 or 2 splitters and/or 24 SC ports. It is very suitable for FTTH applications in multi-dwelling buildings. This terminal is small, light-weight and perfect for fiber routing. It s wall mountable, and very easy to install and maintain. The TAB-24 provides quick access to 24 fibers. It also allows straight through cabling to multiple floors while distributing fibers onto each floor. The required fibers assigned to the floor will be accessible, while the other fibers continue through the box to their destination (without interruption). Features Two versatile fiber terminals for a wide-range of applications Pre-loaded with adapters, pigtails, or PLC splitters Accommodates mechanical or fusion splice protection sleeves Can be used with all fiber types Full fiber management Industry standard wall mount designs Light and easy to install and maintain 20

23 Terminal Access Box (TAB) MTU, SFU Ordering Information Part Number Product Input Output Features TAB-12SC 12 Port Fiber Terminal 12xSC/APC Simplex 12xSC/APC Simplex 12 Port Bulkhead TAB-12SC12 12 Port Fiber Terminal 12 Fibers 12xSC/APC Simplex Splice-Ready TAB-12SC4 4 Port Fiber Terminal 4 Fibers 4xSC/APC Simplex Splice-Ready TAB-12SC104 4 Port Fiber Terminal 1x4 Splitter 4xSC/APC Simplex Pre-Terminated TAB-12SC8 8 Port Fiber Terminal 8 Fibers 8xSC/APC Simplex Splice-Ready TAB-12SC108 8 Port Fiber Terminal 1x8 Splitter 8xSC/APC Simplex Pre-Terminated TAB-12SC204 8 Port Fiber Terminal 2x1x4 Splitters 8xSC/APC Simplex Pre-Terminated Part Number Product Input Output Description TAB-24SC 24 Port Fiber Terminal 24xSC/APC Simplex 24xSC/APC Simplex 24 Port Bulkhead TAB-24SC24 24 Port Fiber Terminal 24 Fibers 24xSC/APC Simplex Splice-Ready TAB-24SC Port Fiber Terminal 1x8 1x16 Splitters 24xSC/APC Simplex Pre-Terminated TAB-24SC8 8 Port Fiber Terminal 8 Fibers 8xSC/APC Simplex Splice-Ready TAB-24SC108 8 Port Fiber Terminal 1x8 Splitter 8xSC/APC Simplex Pre-Terminated TAB-24SC204 8 Port Fiber Terminal 2x1x4 Splitters 8xSC/APC Simplex Pre-Terminated TAB-24SC16 16 Port Fiber Terminal 16 Fibers 16xSC/APC Simplex Splice-Ready TAB-24SC Port Fiber Terminal 1x16 Splitter 16xSC/APC Simplex Pre-Terminated TAB-24SC Port Fiber Terminal 2x1x8 Splitters 16xSC/APC Simplex Pre-Terminated 21

24 Fiber Distribution Box (FDB) MTU, SFU Opterna s Fiber Distribution Box (FDB) Family offers low-cost fiber termination solutions that provide access for up to 48 fiber ports in three sizes: FDB-12: 4, 8, or 12 Fiber Configurations. Dimensions are 9.5H x 8.5W x 2.5D inches. FDB-24: 8, 16, or 24 Fiber Configurations. Dimensions are 13.0H x 10.5W x 3.5D inches. FDB-48: 16, 24, 32, or 48 Fiber Configurations. Dimensions are 20.0H x 15.4W x 5.3D inches. The FDB Family was developed for splitter-ready FTTx applications, supporting 12-fiber, 24-fiber, or 48-fiber splices. These wall-mounted units are ideal for splitting / terminating fiber cables in multi-dwelling units or small offices having low to moderate port counts. They offer a two-layer design with a large rear splice area for splice protection and excess cable slack, and a tech-friendly front interconnect area having the adapter mounting plate for the SC adapters. These boxes provide a cost-effective solution in the FTTx networks for both indoor and outdoor environments. Features Suitable for indoor and outdoor applications Made from high impact ABS material Compact and light weight enclosures Two layer design for easier installation and maintenance Improved high density fiber management Accommodates mechanical or fusion splice protection sleeves Multiple options for splitting and distribution supporting various network topologies Separate Cable Access and Cable Splice areas Cable spools to maintain minimum bend radius requirements FDB-24 FDB-12 FDB-48 22

25 Fiber Distribution Box (FDB) MTU, SFU Ordering Information Part Number Product Input Output Features FDB-12SC 12 Port Distribution Box 12xSC/APC Simplex 12xSC/APC Simplex 12 Port Bulkhead FDB-12SC12 12 Port Distribution Box 12 Fibers 12xSC/APC Simplex Splice-Ready FDB-12SC4 4 Port Distribution Box 4 Fibers 4xSC/APC Simplex Splice-Ready FDB-12SC104 4 Port Distribution Box 1x4 Splitter 4xSC/APC Simplex Pre-Terminated FDB-12SC8 8 Port Distribution Box 8 Fibers 8xSC/APC Simplex Splice-Ready FDB-12SC108 8 Port Distribution Box 1x8 Splitter 8xSC/APC Simplex Pre-Terminated FDB-12SC204 8 Port Distribution Box 2x1x4 Splitters 8xSC/APC Simplex Pre-Terminated Part Number Product Input Output Description FDB-24SC 24 Port Distribution Box 24xSC/APC Simplex 24xSC/APC Simplex 24 Port Bulkhead FDB-24SC24 24 Port Distribution Box 24 Fibers 24xSC/APC Simplex Splice-Ready FDB-24SC Port Distribution Box 1x8 1x16 Splitters 24xSC/APC Simplex Pre-Terminated FDB-24SC Port Distribution Box 3x1x8 Splitters 24xSC/APC Simplex Pre-Terminated FDB-24SC8 8 Port Distribution Box 8 Fibers 8xSC/APC Simplex Splice-Ready FDB-24SC108 8 Port Distribution Box 1x8 Splitter 8xSC/APC Simplex Pre-Terminated FDB-24SC204 8 Port Distribution Box 2x1x4 Splitters 8xSC/APC Simplex Pre-Terminated FDB-24SC16 16 Port Distribution Box 16 Fibers 16xSC/APC Simplex Splice-Ready FDB-24SC Port Distribution Box 1x16 Splitter 16xSC/APC Simplex Pre-Terminated FDB-24SC Port Distribution Box 2x1x8 Splitters 16xSC/APC Simplex Pre-Terminated Part Number Product Input Output Description FDB-48SC 48 Port Distribution Box 48xSC/APC Simplex 48xSC/APC Simplex 48 Port Bulkhead FDB-48SC48 48 Port Distribution Box 48 Fibers 48xSC/APC Simplex Splice-Ready FDB-48SC Port Distribution Box 3x1x16 Splitters 48xSC/APC Simplex Pre-Terminated FDB-48SC16 16 Port Distribution Box 16 Fibers 16xSC/APC Simplex Splice-Ready FDB-48SC Port Distribution Box 1x16 Splitter 16xSC/APC Simplex Pre-Terminated FDB-48SC Port Distribution Box 2x1x8 Splitters 16xSC/APC Simplex Pre-Terminated FDB-48SC24 24 Port Distribution Box 24 Fibers 24xSC/APC Simplex Splice-Ready FDB-48SC Port Distribution Box 3x1x8 Splitters 24xSC/APC Simplex Pre-Terminated FDB-48SC Port Distribution Box 1x8 1x16 Splitters 24xSC/APC Simplex Pre-Terminated FDB-48SC32 32 Port Distribution Box 32 Fibers 32xSC/APC Simplex Splice-Ready FDB-48C Port Distribution Box 1x32 Splitter 32xSC/APC Simplex Pre-Terminated FDB-48SC Port Distribution Box 2x1x16 Splitters 32xSC/APC Simplex Pre-Terminated 23

26 Optical Distribution Box (ODB) MTU, SFU Opterna s Optical Distribution Box (ODB) product line is a robust series of outdoor-rated enclosures designed for FTTx networks. The ODB features an internal swing-out panel design with an integrated splice area that accommodates a PLC splitter, splicing and excess fiber storage. The swing-out panel also features a front face with a removable adapter plate holding SC duplex or LC quad adapters.* Features Indoor and outdoor applications IP 55 rated Compact and light, made of UV resistant polycarbonate Swing-out panel and removable adapter plate for easy installation and maintenance Integrated holder for one PLC splitter Integrated splice tray and fiber management Distribution cables can be pre-terminated or spliced to pigtails Lock with protective cap Available in different sizes, with up to 48 distribution ports Specifications Parameter ODB-100 ODB-200 ODB-300 Dimensions 7.9w x 8.1h x 3.6d in. 10.0w x 12.2h x 4.2d in. 13.3w x 16.3h x 6.5d in. Feeder cable ports 2 PG16 (10 to 14mm dia.) 2 ports, up to 17mm dia. 2 ports, up to 17mm dia. Distribution cable ports 8 (2 to 7mm dia.) 24 ports, up to 7mm dia. 48 ports, up to 7mm dia. Number of adapters 4 SC duplex or LC Quad 8 SC duplex or LC Quad 12 SC duplex or LC Quad Splitter capacity Splice capacity Water and dust resistance IEC (IPX5, IP5X) Impact resistance IEC (IK08) Operating temperature -20 to +65 C Enclosure material Polycarbonate Color RAL-7016 (anthracite grey) *Other types of enclosures are available. Please contact Opterna for further details. 24

27 MTU, SFU Optical Distribution Box (ODB) Ordering Information Part Number Product Adapters Splice Trays ODB-1B-000-AG-xxx ODB 100B Enclosure No Adapters (built-in) ODB-1B-2SDA-AG-xxx ODB 100B 2xSC/APC Duplex 4 port SC/APC (built-in) ODB-1B-4SDA-AG-xxx ODB 100B 4xSC/APC Duplex 8 port SC/APC (built-in) Substitute SDU for SC/UPC Duplex Substitute LQA for LC/APC Quad Substitute LQU for LC/UPC Quad Part Number Product Adapters Splice Trays ODB-2A-000-1T-AG-xxx ODB 200A No Adapters 1 Tray No Adapters 1 Tray ODB-2A-000-2T-AG-xxx ODB 200A No Adapters 2 Trays No Adapters 2 Trays ODB-2A-000-3T-AG-xxx ODB 200A No Adapters 3 Trays No Adapters 3 Trays ODB-2A-4SDA-0T-AG-xxx ODB 200A 4xSC/APC Duplex 8 port SC/APC No Trays ODB-2A-4SDA-1T-AG-xxx ODB 200A 4xSC/APC Duplex 1 Tray 8 port SC/APC 1 Tray ODB-2A-4SDA-2T-AG-xxx ODB 200A 4xSC/APC Duplex 2 Trays 8 port SC/APC 2 Trays ODB-2A-4SDA-3T-AG-xxx ODB 200A 4xSC/APC Duplex 3 Trays 8 port SC/APC 3 Trays ODB-2A-8SDA-0T-AG-xxx ODB 200A 8xSC/APC Duplex 16 port SC/APC No Trays ODB-2A-8SDA-1T-AG-xxx ODB 200A 8xSC/APC Duplex 1 Tray 16 port SC/APC 1 Tray ODB-2A-8SDA-2T-AG-xxx ODB 200A 8xSC/APC Duplex 2 Trays 16 port SC/APC 2 Trays ODB-2A-8SDA-3T-AG-xxx ODB 200A 8xSC/APC Duplex 3 Trays 16 port SC/APC 3 Trays ODB-2A-12SDA-0T-AG-xxx ODB 200A 12xSC/APC Duplex 24 port SC/APC No Trays ODB-2A-12SDA-1T-AG-xxx ODB 200A 12xSC/APC Duplex 1 Tray 24 port SC/APC 1 Tray ODB-2A-12SDA-2T-AG-xxx ODB 200A 12xSC/APC Duplex 2 Trays 24 port SC/APC 2 Trays ODB-2A-12SDA-3T-AG-xxx ODB 200A 12xSC/APC Duplex 3 Trays 24 port SC/APC 3 Trays Substitute SDU for SC/UPC Duplex Substitute LQA for LC/APC Quad Substitute LQU for LC/UPC Quad xxx = PLC Splitter -102 = 1 x 2 Splitter -204 = 2 x 4 Splitter -104 = 1 x 4 Splitter -208 = 2 x 8 Splitter -108 = 1 x 8 Splitter -216 = 2 x 16 Splitter -116 = 1 x 16 Splitter -232 = 2 x 32 Splitter -132 = 1 x 32 Splitter 25

28 Optical Distribution Box (ODB) MTU, SFU Ordering Information (continued) Part Number Product Adapters Splice Trays ODB-3A-000-1T-AG-xxx ODB 300A No Adapters 1 Tray No Adapters 1 Tray ODB-3A-000-2T-AG-xxx ODB 300A No Adapters 2 Trays No Adapters 2 Trays ODB-3A-000-3T-AG-xxx ODB 300A No Adapters 3 Trays No Adapters 3 Trays ODB-3A-6SDA-0T-AG-xxx ODB 300A 6xSC/APC Duplex 12 port SC/APC No Trays ODB-3A-6SDA-1T-AG-xxx ODB 300A 6xSC/APC Duplex 1 Tray 12 port SC/APC 1 Tray ODB-3A-6SDA-2T-AG-xxx ODB 300A 6xSC/APC Duplex 2 Trays 12 port SC/APC 2 Trays ODB-3A-6SDA-3T-AG-xxx ODB 300A 6xSC/APC Duplex 3 Trays 12 port SC/APC 3 Trays ODB-3A-8SDA-0T-AG-xxx ODB 300A 8xSC/APC Duplex 16 port SC/APC No Trays ODB-3A-8SDA-1T-AG-xxx ODB 300A 8xSC/APC Duplex 1 Tray 16 port SC/APC 1 Tray ODB-3A-8SDA-2T-AG-xxx ODB 300A 8xSC/APC Duplex 2 Trays 16 port SC/APC 2 Trays ODB-3A-8SDA-3T-AG-xxx ODB 300A 8xSC/APC Duplex 3 Trays 16 port SC/APC 3 Trays ODB-3A-12SDA-0T-AG-xxx ODB 300A 12xSC/APC Duplex 24 port SC/APC No Trays ODB-3A-12SDA-1T-AG-xxx ODB 300A 12xSC/APC Duplex 1 Tray 24 port SC/APC 1 Tray ODB-3A-12SDA-2T-AG-xxx ODB 300A 12xSC/APC Duplex 2 Trays 24 port SC/APC 2 Trays ODB-3A-12SDA-3T-AG-xxx ODB 300A 12xSC/APC Duplex 3 Trays 24 port SC/APC 3 Trays ODB-3A-16SDA-0T-AG-xxx ODB 300A 16xSC/APC Duplex 32 port SC/APC No Trays ODB-3A-16SDA-1T-AG-xxx ODB 300A 16xSC/APC Duplex 1 Tray 32 port SC/APC 1 Tray ODB-3A-16SDA-2T-AG-xxx ODB 300A 16xSC/APC Duplex 2 Trays 32 port SC/APC 2 Trays ODB-3A-16SDA-3T-AG-xxx ODB 300A 16xSC/APC Duplex 3 Trays 32 port SC/APC 3 Trays Substitute SDU for SC/UPC Duplex Substitute LQA for LC/APC Quad Substitute LQU for LC/UPC Quad xxx = PLC Splitter -102 = 1 x 2 Splitter -204 = 2 x 4 Splitter -104 = 1 x 4 Splitter -208 = 2 x 8 Splitter -108 = 1 x 8 Splitter -216 = 2 x 16 Splitter -116 = 1 x 16 Splitter -232 = 2 x 32 Splitter -132 = 1 x 32 Splitter 26

29 OSP Solutions Outside Plant (OSP) products often form the foundation of any reliable FTTx network. Without these products, critical links between customers and service providers could not be established/maintained. A Fiber Distribution Hub (FDH) is strategically located in the OSP to connect various inter and intra networks. Opterna s TurnOpt FDH combines unique patented features with field tested components to address plug-and-play and splice connectivity requirements. TurnOpt is also uniquely engineered to interconnect with BuildOpt, FDB Series, TAB Series and ODB Series products. For OSP applications, TurnOpt is available in either pole or pedestal mount versions. Supplementing TurnOpt is the Outdoor FTTx Demarc (DOpt), a unique interconnect device which allows for plug-and-play solutions in outdoor environments. 27

30 TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub OSP TurnOpt is a compact Fiber Distribution Hub (FDH) specifically designed for lowdensity topologies. Supporting up to 96 subscribers, the TurnOpt FDH is ideally suited for pole-mount, pedestal and wall-mount applications. The TurnOpt FDH features Opterna s exclusive Rotating Frame Assembly which provides 180 access to subscriber ports, the splitter module compartment, parking and cable management. A variety of splitter modules are available for use in the TurnOpt FDH. The TurnOpt FDH supports various configurations of 48, 72 or 96 subscriber drops, including direct connections to splitters or power users (express ports). Optional equipment includes splice trays or stubs or MPO panels. Features Patented rotating frame assembly Up to 96 subscribers 4 or 7 splitter module capacity Parking for 32 or 64 splitter outputs Compact size: 12.5x24.5x10 or 13.5x27.5x11.5 NEMA 4-rated OSP enclosure Approximately 25 lbs or 28 lbs. Pedestal, pole-mount, wall-mount or belowgrade options Splitter modules: 1x32, 1x16, 1x8, 2x1x16, 2x1x8 Snap-in, finger release no tools needed Telcordia GR 1209 and 1221 Exclusive Rotating Frame Assembly Polemount kit Specifications Parameter TurnOpt 1000 (48 and 72 fiber) TurnOpt 1100 (72 and 96 fiber) Dimensions 12.5w x 24.5h x 10d in. 13.5w x 27.5h x 11.5d in. Mounting Options Pole, Wall, Pedestal, Below-Grade Pole, Wall Pole Mounting Kit Part No. AH10W1-PMK AH11W1-PMK Splitter module capacity 4 7 Parking capacity 32 splitter module leads 64 splitter module leads Input fiber splice tray capacity 12F or 24F Splice Tray 12F or 24F Splice Tray Distribution fiber splice tray capacity 48F or 72F Ribbon (2 trays) 72F or 96F Ribbon (2 trays) Distribution fiber MPO connectors 4 or 6 MPOs 6 or 8 MPOs Maximum number of splice trays 3 (one Input; two Distribution) Stub cables Indoor/Outdoor G.657.A bend insensitive fiber Color Almond Beige Compliance GR-3125-CORE 28

31 OSP TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub Ordering Information Part Number TurnOpt Ports Product Input Type Distribution Type AH10W48-ASLxx-MP00-SCA F1 xx Stub 48F2 MPO SC/APC 12 Fiber Stub 4 MPO AH10W48-ASLxx-SLxx-SCA F1 xx Stub 48F2 xx Stub SC/APC 12 Fiber Stub 48 Fiber Stub AH10W48-ASLxx-TL00-SCA F1 xx Stub 48F2 Splice SC/APC 12 Fiber Stub 48 Fiber Splice AH10W48-ATL00-MP00-SCA F1 Splice 48F2 MPO SC/APC 12 Fiber Splice 4 MPO AH10W48-ATL00-SLxx-SCA F1 Splice 48F2 xx Stub SC/APC 12 Fiber Splice 48 Fiber Stub AH10W48-ATL00-TL00-SCA F1 Splice 48F2 Splice SC/APC 12 Fiber Splice 48 Fiber Splice AH10W48-BSLxx-MP00-SCA F1 xx Stub 48F2 MPO SC/APC 24 Fiber Stub 4 MPO AH10W48-BSLxx-SLxx-SCA F1 xx Stub 48F2 xx Stub SC/APC 24 Fiber Stub 48 Fiber Stub AH10W48-BSLxx-TL00-SCA F1 xx Stub 48F2 Splice SC/APC 24 Fiber Stub 48 Fiber Splice AH10W48-BTL00-MP00-SCA F1 Splice 48F2 MPO SC/APC 24 Fiber Splice 4 MPO AH10W48-BTL00-SLxx-SCA F1 Splice 48F2 xx Stub SC/APC 24 Fiber Splice 48 Fiber Stub AH10W48-BTL00-TL00-SCA F1 Splice 48F2 Splice SC/APC 24 Fiber Splice 48 Fiber Splice AH10W72-ASLxx-MP00-SCA F1 xx Stub 72F2 MPO SC/APC 12 Fiber Stub 6 MPO AH10W72-ASLxx-SLxx-SCA F1 xx Stub 72F2 xx Stub SC/APC 12 Fiber Stub 72 Fiber Stub AH10W72-ASLxx-TL00-SCA F1 xx Stub 72F2 Splice SC/APC 12 Fiber Stub 72 Fiber Splice AH10W72-ATL00-MP00-SCA F1 Splice 72F2 MPO SC/APC 12 Fiber Splice 6 MPO AH10W72-ATL00-SLxx-SCA F1 Splice 72F2 xx Stub SC/APC 12 Fiber Splice 72 Fiber Stub AH10W72-ATL00-TL00-SCA F1 Splice 72F2 Splice SC/APC 12 Fiber Splice 72 Fiber Splice AH10W72-BSLxx-MP00-SCA F1 xx Stub 72F2 MPO SC/APC 24 Fiber Stub 6 MPO AH10W72-BSLxx-SLxx-SCA F1 xx Stub 72F2 xx Stub SC/APC 24 Fiber Stub 72 Fiber Stub AH10W72-BSLxx-TL00-SCA F1 xx Stub 72F2 Splice SC/APC 24 Fiber Stub 72 Fiber Splice AH10W72-BTL00-MP00-SCA F1 Splice 72F2 MPO SC/APC 24 Fiber Splice 6 MPO AH10W72-BTL00-SLxx-SCA F1 Splice 72F2 xx Stub SC/APC 24 Fiber Splice 72 Fiber Stub AH10W72-BTL00-TL00-SCA F1 Splice 72F2 Splice SC/APC 24 Fiber Splice 72 Fiber Splice Pedestal Mount and Below-Grade Mount Available for TurnOpt 1000 (48-fiber and 72-fiber): ĔĔ Substitute AH10E for Pedestal Mount ĔĔ Substitute AH10L for Below-Grade Mount 00 = None 46 = 46m (150 feet) 10 = 10m ( 32 feet) 61 = 61m (200 feet) 20 = 20m ( 65 feet) 77 = 77m (250 feet) 31 = 31m (100 feet) 92 = 92m (300 feet) 29

32 TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub OSP Ordering Information (continued) Part Number TurnOpt Ports Product Input Type Distribution Type AH11W72-ASLxx-MP00-SCA F1 xx Stub 72F2 MPO SC/APC 12 Fiber Stub 6 MPO AH11W72-ASLxx-SLxx-SCA F1 xx Stub 72F2 xx Stub SC/APC 12 Fiber Stub 72 Fiber Stub AH11W72-ASLxx-TL00-SCA F1 xx Stub 72F2 Splice SC/APC 12 Fiber Stub 72 Fiber Splice AH11W72-ATL00-MP00-SCA F1 Splice 72F2 MPO SC/APC 12 Fiber Splice 6 MPO AH11W72-ATL00-SLxx-SCA F1 Splice 72F2 xx Stub SC/APC 12 Fiber Splice 72 Fiber Stub AH11W72-ATL00-TL00-SCA F1 Splice 72F2 Splice SC/APC 12 Fiber Splice 72 Fiber Splice AH11W72-BSLxx-MP00-SCA F1 xx Stub 72F2 MPO SC/APC 24 Fiber Stub 6 MPO AH11W72-BSLxx-SLxx-SCA F1 xx Stub 72F2 xx Stub SC/APC 24 Fiber Stub 72 Fiber Stub AH11W72-BSLxx-TL00-SCA F1 xx Stub 72F2 Splice SC/APC 24 Fiber Stub 72 Fiber Splice AH11W72-BTL00-MP00-SCA F1 Splice 72F2 MPO SC/APC 24 Fiber Splice 6 MPO AH11W72-BTL00-SLxx-SCA F1 Splice 72F2 xx Stub SC/APC 24 Fiber Splice 72 Fiber Stub AH11W72-BTL00-TL00-SCA F1 Splice 72F2 Splice SC/APC 24 Fiber Splice 72 Fiber Splice AH11W96-ASLxx-MP00-SCA F1 xx Stub 96F2 MPO SC/APC 12 Fiber Stub 8 MPO AH11W96-ASLxx-SLxx-SCA F1 xx Stub 96F2 xx Stub SC/APC 12 Fiber Stub 96 Fiber Stub AH11W96-ASLxx-TL00-SCA F1 xx Stub 96F2 Splice SC/APC 12 Fiber Stub 96 Fiber Splice AH11W96-ATL00-MP00-SCA F1 Splice 96F2 MPO SC/APC 12 Fiber Splice 8 MPO AH11W96-ATL00-SLxx-SCA F1 Splice 96F2 xx Stub SC/APC 12 Fiber Splice 96 Fiber Stub AH11W96-ATL00-TL00-SCA F1 Splice 96F2 Splice SC/APC 12 Fiber Splice 96 Fiber Splice 00 = None 46 = 46m (150 feet) 10 = 10m ( 32 feet) 61 = 61m (200 feet) 20 = 20m ( 65 feet) 77 = 77m (250 feet) 31 = 31m (100 feet) 92 = 92m (300 feet) 30

33 OSP TurnOpt Fiber Distribution Hub Low-Density Fiber Distribution Hub Ordering Information (continued) Part Number Product IL (max) IL Uniformity Return Loss TSM1-108S-SCA TurnOpt 1x8 Standard Splitter 10.4 db 0.5 db max. 55 db min. TSM1-116S-SCA TurnOpt 1x16 Standard Splitter 13.9 db 1.4 db max. 55 db min. TSM1-132S-SCA TurnOpt 1x32 Standard Splitter 17.2 db 1.6 db max. 55 db min. TSM1-108P-SCA TurnOpt 1x8 Premium Splitter 10.4 db 0.5 db max. 55 db min. TSM1-116P-SCA TurnOpt 1x16 Premium Splitter 13.9 db 1.4 db max. 55 db min. TSM1-132P-SCA TurnOpt 1x32 Premium Splitter 17.2 db 1.6 db max. 55 db min. TSM2-108S-SCA TurnOpt 2x1x8 Standard Splitter 10.4 db 0.5 db max. 55 db min. TSM2-116S-SCA TurnOpt 2x1x16 Standard Splitter 13.9 db 1.4 db max. 55 db min. TSM2-108P-SCA TurnOpt 2x1x8 Premium Splitter 10.4 db 0.5 db max. 55 db min. TSM2-116P-SCA TurnOpt 2x1x16 Premium Splitter 13.9 db 1.4 db max. 55 db min. Premium: Telcordia Certified Extended Warranty; r = 5mm Ultra Bend Insensitive Fiber Standard: 3-year Warranty Operating Temperature: -40 to 185 F (-40 to 85 C) Operating Wavelength: nm Polarization Dependent Loss: 0.3 db max. 31

34 Outdoor Demarc Unit (DOpt) OSP Opterna s DOpt unit is a unique outdoor enclosure that allows for the use of a variety of hardened simplex, duplex and multi-fiber connectors. DOpt can either be attached to a pole for aerial networks or placed inside pedestals for buried networks. Features UV-Resistant polycarbonate enclosure Weatherproof connectors and drop cables Built-in wall-mount features Stainless steel pole-mount brackets IP66-rated enclosure GR-771 compliant Dimensions: 10h x 6.5w x 3.8d inches Color: RAL 7016 Anthracite Grey Operating Temperature: -50 to 165 F Specifications F1 F1 F1 F1 F2 F2 F2 F2 F2 F2 Ports Type Cable Jacket Length Type Conn Type Conn Cable Jacket Length A B C D E F G A B C D E ODU 4 K N N XXX K SC ODP H SC H D XXX Outdoor 6 B C D H LD Outdoor K LD C Z Demarc 2 Z Demarc 2 Unit O Drop O K = Senko IP B = Stub N = None C = Corning Cable 2 = m2fx Cable O = Opterna Cable D = Indoor/Outdoor Z = LSZH XXX = Length H = Harting SC = SC/APC Simplex LD = LC/UPC Duplex 00 = None 046 = 46m (150 feet) 003 = 3m ( 10 feet) 050 = 50m (165 feet) 006 = 6m ( 20 feet) 061 = 61m (200 feet) 010 = 10m ( 32 feet) 077 = 77m (250 feet) 015 = 15m ( 49 feet) 092 = 92m (300 feet) 020 = 20m ( 65 feet) 100 = 100m (328 feet) 023 = 23m ( 75 feet) 200 = 200m (656 feet) 031 = 31m (100 feet) 300 = 300m (984 feet) 32

35 Outdoor Demarc Unit (DOpt) OSP Ordering Information Part Number Fibers Input Type Distribution Type ODU4BCDxxxKSC 4 Corning In/Out Stub 4 Port Senko IP SC/APC Simplex ODU4B2DxxxKSC 4 m2fx In/Out Stub 4 Port Senko IP SC/APC Simplex ODU4BODxxxKSC 4 Opterna In/Out Stub 4 Port Senko IP SC/APC Simplex ODU6BCDxxxKSC 6 Corning In/Out Stub 6 Port Senko IP SC/APC Simplex ODU6B2DxxxKSC 6 m2fx In/Out Stub 6 Port Senko IP SC/APC Simplex ODU6BODxxxKSC 6 Opterna In/Out Stub 6 Port Senko IP SC/APC Simplex ODU4BCDxxxKLD 8 Corning In/Out Stub 4 Port Senko IP LC/UPC Duplex ODU4B2DxxxKLD 8 m2fx In/Out Stub 4 Port Senko IP LC/UPC Duplex ODU4BODxxxKLD 8 Opterna In/Out Stub 4 Port Senko IP LC/UPC Duplex ODU6KNN000KLD 12 Senko IP MPO Port 6 Port Senko IP LC/UPC Duplex ODU6BCDxxxKLD 12 Corning In/Out Stub 6 Port Senko IP LC/UPC Duplex ODU6B2DxxxKLD 12 m2fx In/Out Stub 6 Port Senko IP LC/UPC Duplex ODU6BODxxxKLD 12 Opterna In/Out Stub 6 Port Senko IP LC/UPC Duplex ODU4BCDxxxHLD 8 Corning In/Out Stub 4 Port Harting LC/UPC Duplex ODU4B2DxxxHLD 8 m2fx In/Out Stub 4 Port Harting LC/UPC Duplex ODU4BODxxxHLD 8 Opterna In/Out Stub 4 Port Harting LC/UPC Duplex ODU6KNN000HLD 12 Senko IP MPO Port 6 Port Harting LC/UPC Duplex ODU6BCDxxxHLD 12 Corning In/Out Stub 6 Port Harting LC/UPC Duplex ODU6B2DxxxHLD 12 m2fx In/Out Stub 6 Port Harting LC/UPC Duplex ODU6BODxxxHLD 12 Opterna In/Out Stub 6 Port Harting LC/UPC Duplex Ordering Information DOpt Outdoor Demarc Drop Cables Part Number Fibers Connector Type Drop Cable Type ODPKSCCDxxx 1 Senko IP Simplex SC/APC Corning Indoor/Outdoor Drop Cable ODPKSC2Dxxx 1 Senko IP Simplex SC/APC m2fx Indoor/Outdoor Drop Cable ODPKSCODxxx 1 Senko IP Simplex SC/APC Opterna Indoor/Outdoor Drop Cable ODPKLDCDxxx 2 Senko IP Duplex LC/UPC Corning Indoor/Outdoor Drop Cable ODPKLD2Dxxx 2 Senko IP Duplex LC/UPC m2fx Indoor/Outdoor Drop Cable ODPKLDODxxx 2 Senko IP Duplex LC/UPC Opterna Indoor/Outdoor Drop Cable ODPHLDHDxxx 2 Harting Duplex LC/UPC Harting Indoor/Outdoor Drop Cable 33

36 USA Headquarters Falcon Place Suite 116 Sterling, VA Ph: Fax: ASIA India Plot 43A Cochin Special Economic Zone (CSEZ) Kakkanad Kochi - 37 Ph: Vintage Building 1/1 Kalyana Mantapa Road Jakkasandara Koramangala Bangalore - 34 Ph: / Opterna Technologies Pvt. Ltd # /2/P First Floor High Mark Chambers Gachibowli Road Hyderabad Ph: Dubai PO Box B-14 Dubai Airport Free Zone Ph: Fax: EUROPE United Kingdom 5 Vermont Place Michigan Drive Tongwell Milton Keynes MK15 8JA Ph: France 69 Rue Crozatier Paris Phone: +33 (0) The information contained in this ordering guide is subject to change without notice. In no event shall Opterna be liable for any special, incidental, consequential or indirect damages including lost profits, cost of delay, failure or business interruption, cost of lost or damaged data or documentation, or any liabilities to third parties arising from the use of information contained in this product guide.