V-3000 Series Miniature Basic Switches
|
|
- Beverly West
- 5 years ago
- Views:
Transcription
1 6 V-3000 Series Miniature Basic Switches Specifications FEATURES V-type Microswitches (JIS C 4505) That Feature Excellent Tracking and That Use Special Thermosetting Resin Used in Switch Cases and Covers. Thermosetting resin ensures a creeping distance of 4mm. Excellent tracking resistance (CTI 600) greatly reduces the risk of electrical fires. Excellent arc resistance ensures safety even with high voltages. Heat-resistant resin improves solderability. Improved shock resistance against cracking and chipping. Wide operating temperature range of ~20 to +120 C. Use of newly developed fire-resistant materials greatly reduces the risk of switch short-circuit accidents. click APPLICATIONS Applications where high temperatures are required such as microwave ovens, electronic jars, hot-water heater-storage pots, and dish washers. Applications where tracking resistance is required such as refrigerators, washing machines and household hot-water heaters. ORDER GUIDE High Capacity Type (21A rating, O.F. =2.94N) SPDT V-3010C SPDT V-3011C SPDT V-3012C SPDT V-3013C SPDT V-3014C SPDT V-3015C SPDT V-3016C 1 No. CP-PC-2159E
2 High Capacity Type (16A rating, O.F.=2.45N) Soldered SPDT V-3910A Screw SPDT V-3910B 187 SPDT V-3910D Soldered SPDT V-3911A Screw SPDT V-3911B 187 SPDT V-3911D Soldered SPDT V-3912A Screw SPDT V-3912B 187 SPDT V-3912D Soldered SPDT V-3913A Screw SPDT V-3913B 187 SPDT V-3913D Soldered SPDT V-3914A Screw SPDT V-3914B 187 SPDT V-3914D Soldered SPDT V-3915A Screw SPDT V-3915B 187 SPDT V-3915D Soldered SPDT V-3916A Screw SPDT V-3916B 187 SPDT V-3916D Standard Type (11A rating, O.F.=1.96N) Soldered SPDT V-3210A Screw SPDT V-3210B 187 SPDT V-3210D Soldered SPDT V-3211A Screw SPDT V-3211B 187 SPDT V-3211D Soldered SPDT V-3212A Screw SPDT V-3212B 187 SPDT V-3212D Soldered SPDT V-3213A Screw SPDT V-3213B 187 SPDT V-3213D Soldered SPDT V-3214A Screw SPDT V-3214B 187 SPDT V-3214D Soldered SPDT V-3215A Screw SPDT V-3215B 187 SPDT V-3215D Soldered SPDT V-3216A Screw SPDT V-3216B 187 SPDT V-3216D 2
3 Standard Type (11A rating, O.F.=0.98N) Soldered SPDT V-3310A Screw SPDT V-3310B 187 SPDT V-3310D Soldered SPDT V-3311A Screw SPDT V-3311B 187 SPDT V-3311D Soldered SPDT V-3312A Screw SPDT V-3312B 187 SPDT V-3312D Soldered SPDT V-3313A Screw SPDT V-3313B 187 SPDT V-3313D Soldered SPDT V-3314A Screw SPDT V-3314B 187 SPDT V-3314D Soldered SPDT V-3315A Screw SPDT V-3315B 187 SPDT V-3315D Soldered SPDT V-3316A Screw SPDT V-3316B 187 SPDT V-3316D Standard Type (5A rating, O.F.=0.98N) Soldered SPDT V-3410A 187 SPDT V-3410D Soldered SPDT V-3411A 187 SPDT V-3411D Soldered SPDT V-3412A 187 SPDT V-3412D Soldered SPDT V-3413A 187 SPDT V-3413D Soldered SPDT V-3414A 187 SPDT V-3414D Soldered SPDT V-3415A 187 SPDT V-3415D Soldered SPDT V-3416A 187 SPDT V-3416D 3
4 Light Operating Force Type (5A rating, O.F.=0.49N) Soldered SPDT V-3510A 187 SPDT V-3510D Soldered SPDT V-3511A 187 SPDT V-3511D Soldered SPDT V-3512A 187 SPDT V-3512D Soldered SPDT V-3513A 187 SPDT V-3513D Soldered SPDT V-3514A 187 SPDT V-3514D Soldered SPDT V-3515A 187 SPDT V-3515D Soldered SPDT V-3516A 187 SPDT V-3516D Light Operating Force Type (5A rating, O.F.=0.25N) Soldered SPDT V-3610A 187 SPDT V-3610D Soldered SPDT V-3611A 187 SPDT V-3611D Soldered SPDT V-3612A 187 SPDT V-3612D Soldered SPDT V-3613A 187 SPDT V-3613D Soldered SPDT V-3614A 187 SPDT V-3614D Soldered SPDT V-3615A 187 SPDT V-3615D Soldered SPDT V-3616A 187 SPDT V-3616D 4
5 Low Current Load Type (0.1A rating, O.F.=1.96N) Soldered SPDT V-3210AK Screw SPDT V-3210BK 187 SPDT V-3210DK Soldered SPDT V-3211AK Screw SPDT V-3211BK 187 SPDT V-3211DK Soldered SPDT V-3212AK Screw SPDT V-3212BK 187 SPDT V-3212DK Soldered SPDT V-3213AK Screw SPDT V-3213BK 187 SPDT V-3213DK Soldered SPDT V-3214AK Screw SPDT V-3214BK 187 SPDT V-3214DK Soldered SPDT V-3215AK Screw SPDT V-3215BK 187 SPDT V-3215DK Soldered SPDT V-3216AK Screw SPDT V-3216BK 187 SPDT V-3216DK Low Current Load Type (0.1A rating, O.F.=0.98N) Soldered SPDT V-3310AK Screw SPDT V-3310BK 187 SPDT V-3310DK Soldered SPDT V-3311AK Screw SPDT V-3311BK 187 SPDT V-3311DK Soldered SPDT V-3312AK Screw SPDT V-3312BK 187 SPDT V-3312DK Soldered SPDT V-3313AK Screw SPDT V-3313BK 187 SPDT V-3313DK Soldered SPDT V-3314AK Screw SPDT V-3314BK 187 SPDT V-3314DK Soldered SPDT V-3315AK Screw SPDT V-3315BK 187 SPDT V-3315DK Soldered SPDT V-3316AK Screw SPDT V-3316BK 187 SPDT V-3316DK 5
6 Light Operating Force Low Current Load Type (0.1A rating, O.F.=0.49N) Soldered SPDT V-3510AK 187 SPDT V-3510DK Soldered SPDT V-3511AK 187 SPDT V-3511DK Soldered SPDT V-3512AK 187 SPDT V-3512DK Soldered SPDT V-3513AK 187 SPDT V-3513DK Soldered SPDT V-3514AK 187 SPDT V-3514DK Soldered SPDT V-3515AK 187 SPDT V-3515DK Soldered SPDT V-3516AK 187 SPDT V-3516DK Light Operating Force Low Current Load Type (0.1A rating, O.F.=0.25N) Soldered SPDT V-3610AK 187 SPDT V-3610DK Soldered SPDT V-3611AK 187 SPDT V-3611DK Soldered SPDT V-3612AK 187 SPDT V-3612DK Soldered SPDT V-3613AK 187 SPDT V-3613DK Soldered SPDT V-3614AK 187 SPDT V-3614DK Soldered SPDT V-3615AK 187 SPDT V-3615DK Soldered SPDT V-3616AK 187 SPDT V-3616DK 6
7 SPECIFICATIONS (for detailed specification of low current load type, see the following page.) External standard Type High capacity Standard Low operating force V-30 C (Rating 21A) V-39 (Rating 16A) V-32 (Rating 11A) V-33 (Rating 11A) Conformed standards JIS C 4505 Approved standards ~ UL/C-UL V-34 (Rating 5A) V-35 (Rating 5A) V-36 (Rating 5A) Structure Contact type Single-Pole Double-Throw (SPDT), Single-Pole Normally-Close (SPNC), Single-Pole Normally-Open (SPNO) Contact Contact material Standard load type: Revet, Low load type: Cross point Standard load type: Silver/Silver alloy, Low load type: Gold alloy Cterminal:Tab 250 A terminal: Solder, B terminal: M3 Screw, D terminal: Tab 187 Electrical rating See Table 1-1 and 1-2 Electrical characteristics Dielectric strength Between non-continuous terminals 1,000Vac 50/60Hz for 1 minute Between each terminal and non-conducting metal part 1,500Vac 50/60Hz for 1 minute Between each terminal and ground 1,500Vac 50/60Hz for 1 minute Insulation resistance Min. 100M 500Vdc megger Initial contact resistance Temperature rise Standard load type: Max. 50m (6 to 8Vdc 1A voltage drop method) Low load type: Max. 100m (6 to 8Vdc 0.1A voltage drop method) Max. 30 C, the termperature at terminal is measured by thermocouple after applying rated current. Rush current 250Vac-50A 250Vac-38A 250Vac-32A 250Vac-30A Mechanical characteristics Actuator strength strength Withstand load 10 times O.F. (operating direction) for 1 minute Soldered terminal: Withstand tensile load of 23N for 1 minute Screw terminal: Withstand tightening strength of 0.6N-m for 1 minute Tab terminal: Withstand tensile and pressing load of 80N for 1 minute 300m/s Impact resistance * 2 200m/s 2 300m/s 2 200m/s 2 50m/s 2 Contact release of 1ms or more at free position and operating limit positions. 1.5mm peak-to-peak amplitude, frequency 10 to 55Hz, for 2 continuous hours Vibration resistance* Contact release of 1ms or less at free position and operating limit positions. Allowable operating speed Table below mm/s to 1m/s Actuator type 0: 1: 2: 3: 4: 5: 6: Min. speed Min. speed: Unstable state of contact must be 0.1s or less. Max. speed: Actuator must not be damaged. Life Environmental characteristics Operating cycle Mechanical life Electrical life Operating temperature range Operating humidity range Max. 600 cycles/minute Min. 10 million cycles or more (Function after operation is 70 to 100% of rated value. Operating frequency: 200 cycles/minute.) 250Vac-21A Min. 100,000 cycles 250Vac-16A Min. 125,000 cycles 250Vac-11A Min. 125,000 cycles Resistive load, Operating frequency 20 cycles/minute 250Vac-5A Min. 100,000 cycles ~20to+120 C (Freezing or condensation not allowed.) Max. 85%RH Mounting Recommended tightening torque 0.4 to 0.6N-m (M3 screw) CTI Insulation Use an isolator when mounting. 600V min. Note: * indicates pin plunger type values. All unmarked items are values common to all catalog listings. Table 1-1 Electrical rating (UL/C-UL rating) Series V-30 C V-39 V-32 V-33 V-34, V-35 V-36 V-32 K V-33 K V-35 K V-36 K Rating 125, 250Vac-21A- HP 125Vdc-0.6A 250Vdc-0.3A 125, 250Vac-16A 125Vdc-0.6A 250Vdc-0.3A 125, 250Vac-11A- HP 125Vdc-0.5A 250Vdc-0.25A 125, 250Vac-5A- 1 /6HP 125Vdc-0.5A 250Vdc-0.25A 125Vac-0.1A 30Vdc-0.1A Min. rating ( 5Vdc-5mA ) 7
8 Table 1-2 Electric duty (unit: Ampere) Rating AC rating DC rating Rated voltage 125Vac 250Vac 8Vdc 14Vdc 30Vdc 125Vdc 250Vdc Switching load Electric motor Electric motor N.C. N.O. N.C. N.O. V-30 C V V-32 V-33 V-34 V-35 V V-3 K 0.1 ~ ~ ~ ~ ~ ~ ~ 0.1 ~ 0.1 ~ 0.1 ~ ~ ~ ~ ~ LOW CURRENT LOAD TYPE SPECIFICATIONS V-32 K V-33 K V-35 K V-36 K Conformed standards JIS C 4505 Approved standards Contact type Contact Contact material UL/C-UL Single-Pole, Double-Throw (SPDT) Cross point Gold alloy A terminal: Solder, B terminal: M3 Screw, D terminal: Tab 187 Electrical rating 125Vac-0.1A, 30Vdc-0.1A Between non-continuous terminals 1,000Vac Dielectric strength Between each terminal and non-conducting metal part 1,500Vac Between each terminal and ground 1,500Vac Insulation resistance Min. 100M 500Vdc megger Initial contact resistance Max. 50m (6 to 8Vdc, 0.1A, voltage drop method) Temperature rise Actuator strength strength Impact resistance * Vibration resistance * Allowable operating speed Operating cycle Mechanical life Electrical life Operating temperature range Operating humidity range Mounting Insulation CTI 30 C Withstand load 10 times O.F. (operating direction) for 1 minute Soldered terminal: Withstand tensile load of 23N for 1 minute Screw terminal: Withstand tightening strength of 0.6N-m for 1 minute Tab terminal: Withstand tensile and pressing load of 80N for 1 minute 300m/s 2 200m/s 2 200m/s 2 50m/s 2 Contact release 1ms or less at free position and operating limit positions 1.5mm peak-to-peak amplitude, frequency 10 to 55Hz, for 2 continuous hours contact release 1ms or less at free position and operating limit positions Table below mm/s to 1m/s Actuator type 0: 1: 2: 3: 4: 5: 6: Min. speed Min. speed: Unstable state of contact must be max. 0.1s, Max. speed: Actuator must not be damaged. Max. 600 cycles/minute Min. 10 million cycles or more (Function after operation is 70 to 100% of rated value. Operating frequency: 60 cycles/minute.) 600 min. Min. 2 million cycles (operating cycle 20 cycles/minute) ~20 to +120 C Max. 85%RH 0.4 to 0.6N-m (M3 screw) Use an isolator when mounting Note: * indicates pin plunger type values. All unmarked items are values common to all catalog listings. 8
9 CIRCUIT CONFIGURATION AND TERMINAL DIAGRAMS Model configuration dimensions C terminal: quick connector ( 250) (unit: mm) V-30 C B terminal: M3 screw Note. (SPNC) and (SPNO) are not provided V-32 V-33 V-39 Single-Pole Double- Throw (SPDT) A terminal: solder V-32 V-33 V-34 V-35 V-36 V-39 D terminal: quick connector ( 187) Note 1: V-30 C Series: Only C ( 250) terminal is available. A, B and D terminals are not available. Note 2: V-32, V-33 and V-39 Seris: B (screw) terminal selectable. Note 3: V-32 to V-36 and V-39 Series: A (solder) and D ( 187) terminals selectable. 9
10 APPEARANCE, EXTERNAL DIMENSIONS (unit: mm) 10
11 (unit: mm) 11
12 PRECAUTIONS Mounting To secure the switch body, tighten the M3 screw on a flat and smooth surfaced by a torque of 0.4 to 0.6N-m. We also recommend combined use of a spring washer and locking the M3 screw with adhesive to prevent the M3 screw from coming loose. Make sure that sufficient insulating space is maintained between terminals and the ground when the switch is mounted. At the switch s free position, ensure a gap between the operating mechanism and plunger or lever. Also, make sure that the plunger is pressed vertically. Set function after operation to at least 70% of the rated O.T. as the standard setting. When mounting the lever type switch, do not apply unnecessary force from the direction opposite to operation direction and from the side. Wiring Soldered terminals Solder the terminal using a 60W soldering iron (soldering iron tip temperature: max. 350 C) making sure that the soldering time is kept to within five seconds. During soldering, prevent force from being applied to the terminals. Screw terminals Use round or open tip (Y-d) crimped terminals and tighten by torque of 0.6N-m or less. Quick connector terminals Insert the quick connector terminal into the receptacle for the 187 or 250 tab in parallel with the terminal. Environmental considerations Avoid use at dusty locations or at locations subject to corrosive gases or silicon that may adversely influence the contacts. Handling precautions When using the switch for switching inductive loads (relays, solenoids, buzzers, etc.), arc may cause the contacts to malfunction. To prevent this, we recommend inserting an adequate spark eliminating circuit. Reliability may drop if synchronization occurs in the AC circuit. Checking the actual load To improve reliability during actual use, we request that you check the quality of the switch in an actual operating state. Melamine resin of which electric characterstic is superior is used for this switch case and cover. The fixing of switch might be loosen by thermal shrinkage of this material. To prevent this loosening, use spring washers or screw locking material after confirming the prevention effect. About high-temperature use Melamine resin that exhibits excellent electrical performance is used in the swith case. However, to improve reliability, we request that you check the quality of the switch in an actual high-temperayure operating state. Selecting the switch Select the switch taking into consideration that the switch should not malfunction even if the operating characteristics change by 20% of the rated values. RESTRICIONS ON USE This product has been designed, developed and manufactured for general-purpose application in machinery and equipment. Accordingly, when used in applications outlined below, special care should be taken to implement a fail-safe and/or redundant design concept as well as a periodic maintenance program. - Safety devices for plant worker protection - Start/stop control devices for transportation and material handling machines - Aeronautical/aerospace machines - Control devices for nuclear reactors Never use this product in applications where human safety may be put at risk. 12 (01) Printed in Japan (SP) 2nd Edition: Issued in Oct., 2003
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE
HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an
More informationContact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect
VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant
More information14CESeries. Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CESeries Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
More informationmasterelectronics.com onlinecomponents.com
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability
More informationBasic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever
Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high
More informationHPV Series. Vane Type Photoelectric Sensors with Integrated General-use Amplifier. Specifications. click FEATURES TYPICAL APPLICATIONS
6 HPV Series Specifications Vane Type Photoelectric Sensors with Integrated General-use Amplifier FEATURES Lineup of 2-optical Axis Sensors That Come in an Easy-to-use Size (vane width 25mm, vane depth
More informationContact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect
V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used
More informationMiniature Basic Switch
Miniature Basic Switch Reliable and Safe Basic Switch Self-cleaning contacts. Best-seller Switches with switching currents of 10 to 21 A. Can be used for shutting down current in doors. Widely used for
More information16 g SS-01GL-FD SS-01GL-F SS-01GL-FT 50 g SS-01GLD SS-01GLD1 SS-01GLD2 SS-01GL SS-01GLT Simulated roller lever
Snap Action Switch SS Subminiature Snap Action Switch Economical, subminiature snap action switch offers long service life (30 million operations minimum) All models are free from overtravel restrictions,
More informationAM5 (QV) SWITCHES. Automation Controls Catalog
Automation ontrols atalog To Be Discontinued: Last time buy:march, 05 MINIATURE SWITHES WITH HIGH PREISION AM5 (QV) SWITHES 5.9 0. 7.8 FEATURES High precision as a result of designing ideal spring by using
More informationHIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH
HIGH APAITY, LONG LIFE SUBMINIATURE SWITH AVM3 P (PS) SWITHES FEATURES 10.1 Amp. high contact capacity is available Long life Precise operating (5: Pin plunger type) Flux-resistant construction with integrally
More informationD2SW-3L1HS D2SW-01L1HS
Sealed Snap Action Switch D2SW Watertight Miniature Snap Action Switch High-quality watertight miniature Snap Action switch. Switch Body meets IP67 (IEC 529) requirements Monoblock construction assures
More informationSpecial-purpose Basic Switch
Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different
More informationSS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept
Subminiature Basic Switch SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept One-piece terminal construction to keep out flux. A single leaf movable spring construction.
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationActuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
More informationTerminals Solder terminals Quick-connect. PCB terminals terminals (#110) 3 A Pin plunger SS-3GP SS-3GPT SS-3GPD SS-3GPB
Subminiature Basic Switch SS-P SS Series Compatible Mounting with a Simple Construction and Easy-to-Use Design Concept Insert molded base and improved case-to-base seal provides enhanced resistance to
More informationOrdering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
More informationUltra Slim Relays 24
Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest
More informationPin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
More informationZ-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
More informationCompact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10
http://www.shinmei-e.co.jp Compact-sized Snap Action Switches (Contact gap is more than 1mm) MQS-54AS Series 1/10 [] Features Flux-resistant construction with integrally molded s. 4 variations with
More informationDPDT Basic Switch for Two Independent Circuit Control
Special-purpose Basic Switch DZ CSM_DZ_DS_E DPDT Basic Switch for Two Independent Circuit Control Ideal for switching the circuits operating on two different voltages, and for controlling two independent
More informationSnap Action Switch. General- Low force 25 g D2F-FL D2F-FL-T D2F-FL-D D2F-FL-A D2F-FL-A1
Snap Action Switch Subminiature Snap Action Switch Super compact, ideal for PCB mounting Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads (microvoltage/microcurrent)
More information7. Approved Standards US: UL, CSA UL: FILE No.E CSA: FILE No.LR31928) 8. Special Function None : Standard U : For ultrasonically cleanable
Subminiature, Sensitive SPDT Signal Switching Relay High sensitivity: 98-mW (Rated power consumption: mw) pickup coil power. Impulse withstand of 1,V ( 1 μs) meets FCC requirements. Stick packing employed
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Basic Switch SUBMINIATURE Subminiature Basic Switch Economical, subminiature
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationSolder terminals D2FD-2L0-1H D2FD-01L0-1H. PCB terminals D2FD-2L0-1T D2FD-01L0-1T. Hinge lever Solder terminals D2FD-2L1-1H D2FD-01L1-1H
Ultra subminiature and dust proof Sealing by using rubber packing means the switch can be used in dust-proof environments (IEC IP6X). Switch rating of 2 A at 125 VAC possible with a single-leaf movable
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationAdd S to the end of the model number for the UL/CSA-approved version. Consult your OMRON sales representative for details.
Sealed Subminiature Snap ction Switch D2HW Smallest Sealed Snap-ction Switch in the Industry With a Long Stroke For Reliable ON/OFF ction Conforms to IP67 Case dimensions 22% smaller than conventional
More informationControl Motor ECM3000
No. CP SS 1816E Control Motor ECM3000 The ECM3000 is a control motor designed for various industrial equipment applications. Two models are available: 90 angular stroke motor for applications such as burner
More informationContact form. Operating Force. Plunger SPDT 204g Dust- Proof (in closed position) Plunger SPST-NC 204g Dust- Proof (in closed position)
D3D Miniature Door Switch Appliance industry standard plunger and lever actuator styles High contact reliability ensured using gold alloy crossbar contacts Drip/spill sealing in free position (plunger
More informationOrdering Information. Door Interlock Switch D2D. Power Switch with Minimum Contact Gap up to 3 mm. D2D - 0. Model Number Legend
Door Interlock Switch D2D Power Switch with Minimum Contact Gap up to 3 mm. Minimum contact gap of 3 mm (standard models), needed in general power switches, is provided. Mechanism with double return spring
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationPRODUCT SPECIFICATION. PC Board Relays. Series.
PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7
More informationJ8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE
POWER ROCKER SWITCH J8 SWITCHES WITH TRIP FUNCTION UPGRADED TYPE FEATURES 1. Power switches with an electromagnetic reset function which meet the need for energy savings in equipment and for safety. Applications
More informationPOWER ROCKER SWITCH. Standard actuator type Wide actuator type UL/C-UL, ENEC/VDE UL/C-UL, ENEC/VDE
POWER ROCKER SWITCH SWITCHES AJ8 switch Standard actuator AJ8 switch Wide actuator FEATURES 1. Power rocker switches for safety requirements. All versions comply with ClassII EN61058-1 insulation grade.
More informationD2F. Ultra Subminiature Basic Switch with plenty of terminal variations. Model Number Legend. Ultra Subminiature Basic Switch
Ultra Subminiature Basic Switch with plenty of terminal variations Incorporating a snapping mechanism made with two highly precise split springs that ensures long durability. Using insertion molded terminals
More informationSafety Relay Unit (I/O Unit Type)
Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and
More informationGX-5SU(B) is just 5.4 mm 0.213in in diameter, the smallest in existing DC two-wire sensors. It saves you space.
DC 2-wire Cylindrical Inductive Proximity SERIES Amplifier Built-in High performance & ease of use Robust in tightening The tightening torque has been improved to approx. four times greater than that of
More informationGeneral-purpose Limit Switch
General-purpose Limit Switch Compact, Economical, Plastic-body Limit Switch Featuring Direct Opening Action Contacts Employs direct opening action mechanism that forcibly opens contacts, and assures accurate
More informationCommunication Controller CC-Link/CPL Converter CMC10A
No. CP SS 1766E Communication Controller CC-Link/CPL Converter CMC10A The communication controller CMC10A is a converter designed for the communication between Yamatake's digital indicating controller
More informationA16. Separate Construction with Cylindrical 16-dia. Body. Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.
Pushbutton Switch (Detachable) (Lighted/Non-Lighted) (Cylindrical 16-dia.) Separate Construction with Cylindrical 16-dia. Body Miniature design of 28.5 mm, the smallest class in the industry. Detachable
More informationSRT2-ROC08, SRT2-ROC16
Ultra-miniature 8-point and 16-point Relaymounted Terminals Ultra-compact (8-point models: 101 x 51 x 51 mm (W x H x D); 16-point models: 156 x 51 x 51 mm (W x H x D)) MOS FET Relay and Relay models. DIN
More informationQuick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
More informationSwitching Power Supply
Switching Power Supply Miniature, Thin Power Supply to Be Built into Equipment Half the size of OMRON s conventional power supply. PCB-type and connector-type models available. UL, CSA approved. Conforming
More informationDC 2-wire Cylindrical Inductive Proximity Sensor
SERIES DC -wire Cylindrical Inductive Proximity -wire type available Oil resistant Metal embedding possible Amplifier Built-in GX G-6 High performance & ease of use G-8/8U GA-/GH GX GX-N G-8H/8H G-N Robust
More informationSlim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay
More information78 Series Electromechanical Relay Selection Guide
78 Series Electromechanical Relay Selection Guide Specification 781 Series 782 Series 783 Series 784 Series Coil Voltages Configuration SPDT DPDT 3PDT 4PDT Contact Rating 15A 15A 15A 15A Base Socket 5
More informationClassification Enclosure rating Input voltage Type of
Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.
More informationMiniature Basic Switch
Miniature Basic Switch Reliable Basic Switches in a Wide ariation Wide variation of best-selling microswitches with switching currents of 10 to 21 A. Can be used for interrupting current when doors are
More informationD2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic
More information5. Terminal Shape P: PCB Terminals 6. Classification None : Standard ST : Stand-off 0.64 mm 15 : High-sensitivity (150 mw) Low-sensitivity
World's tandard Model! Resistant to electromagnetic interference, enables high-density mounting. Impulse withstand voltage of 1,5V meets FCC requirements. old-clad twin-contacts provide short contact bounce
More informationDPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2
Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering
More informationInductive Proximity Sensor
Inductive Proximity Sensor Miniature, Slim-styled Proximity Sensor Space-saving Sensor ideal for timing cam and dog detection. Four mounting holes provided: two each mounting from side or rear of the housing.
More informationSPST-NO SPDT DPST-NO DPDT
Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508
More informationNetwork Instrumentation Module Communications box NX-CB1 Communications adapter NX-CL1/NX-CR1 Terminal adapter NX-TL1/NX-TR1
No. CP-SS-1865E Network Instrumentation Module Communications box NX-CB1 Communications adapter NX-CL1/NX-CR1 Terminal adapter NX-TL1/NX-TR1 Overview Network Instrumentation Modules make optimal distributed
More information4 mm. 8 mm. Proximity Sensor. Sensing head Sensing distance Output configuration Part Number M18 Shielded 4 mm DC 3-wire PNP-NO E2EZ-X4B1 M30
Sensing distance Supply voltage Output 4 mm 8 mm 12 to 24 VDC 100 to 220 VAC 200 ma max. 100 ma max. Proximity Sensor Detects Objects without Being Influenced by Aluminum and Cast Iron Cut Chips Sense
More informationMaking Hazardous Operations Safe and Productive
NEW Safety Guard Switching Unit G9SX-GS Making Hazardous Operations Safe and Productive Making Hazardous Operations Safe and Productive This new addition to the model of Flexible Safety Unit G9SX series
More informationPRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
More informationDC I/O Conversion Module FA-TB32XY
DC I/O Conversion Module FA-TB32XY User's Manual Thank you for purchasing FA Goods product. Before using, please read this User s Manual and the relevant manuals carefully to ensure correct use. SAFETY
More informationBulletin 700-SH Solid-State Relays. Overview/Product Selection. Bulletin 700-SH. Product Selection
Overview/Product Selection Bulletin 700-SH 40 A (resistive) Max. Continuous (Output) Current with Heat Sink 264V AC or 528V AC Max. Voltage Range Options 5 24V DC, 100 120V AC, 200 240V AC Control Input
More informationZE/ZV/ZV2/XE/XV/XV2. (1) Built-in Switch (3) Actuator (4) Conduit/Ground Terminal *
Enclosed Switches ZE/ZV/ZV2/XE/XV/XV2 CSM_ZE_ZV_ZV2_XE _ XV_XV2_DS_E_2_1 General-purpose Enclosed Switches with High Breaking Capacity and High Durability Z General-purpose Basic Switches are built into
More informationMonitoring Relays can be used to monitor 3-phase power supplies with 3 or 4 wires simply by changing DIP switch settings.
Authorised Distributors:- Intech Systems Chennai Pvt. Ltd, Chennai-600 032 Ph: +91 44 4353 8888 Fax: 044 4353 7888 E-mail: info@intechchennai.com Website: www.intechchennai.com Three-phase Voltage Relay
More informationCompact Inductive Proximity Sensor
SERIES Compact Inductive Proximity Sensor Amplifier Built-in High functionality together with robust housing and flexible cable Miniature is an amplifier built-in inductive proximity sensor having a diameter
More informationZE/ZV/ZV2/XE/XV/XV2. General-purpose Enclosed Switches with High Breaking Capacity and High Durability. Enclosed Switches. Model Number Structure
Enclosed Switches CSM_ZE_ZV_ZV2_XE_XV_XV2_DS_E_2_1 General-purpose Enclosed Switches with High Breaking Capacity and High Durability Z General-purpose Basic Switches are built into ZE, ZV, and ZV2 Switches.
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously
More informationonlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
More informationS8VE (60/90/120/180/240-W Models)
Switch Mode Power Supply S8VE (60/90/120/180/240-W Models) CSM_S8VE_DS_E_1_1 60/90/120/180/240-W Models Improved Versions of Standard-type Power Supplies without Indication Monitor. Safety standards: UL508/60950-1,
More informationDC I/O Conversion Module
DC I/O Conversion Module,FA-TB32XYH User's Manual Thank you for purchasing FA Goods product. Before using, please read this User s Manual and the relevant manuals carefully to ensure correct use. SAFETY
More informationHITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions
HITACHI EH-150 series PLC Resistance Temperature Detective input module Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction
More informationInductive Proximity Sensor
Inductive Proximity Sensor Subminiature Sensor with Cable Amplifier Offers Greater Mounting Flexibility Programmable Controller-compatible Subminiature, shielded sensing head (3 or 8 dia.) allows the Sensor
More informationTechnical data. Dimensions: see page 116. ): 4 kv Rated insulation voltage (U i Over-voltage category: Power supply. Rated operating voltage (Un):
Safety module CS AR-91, according to EN 81 Safety modules for the lift automatic floor levelling operation according to EN 81 Main functions For safety applications up to SIL 3 / PL e Choice between automatic
More informationMicroswitches MS Series
General purpose microswitches for heavier duty applications High precision snap action mechanism 16A 250V AC resistive rating (I th ) Wide range of actuator styles Screw terminals with self lifting plate
More informationProgrammable Controller Analog Terminal Block Conversion Module FA1-TBS40ADGN, FA1-TBS40ADDG, FA1-TBS40DAG User's Manual
Programmable Controller Analog Terminal Block Conversion Module FA1-TBS40ADGN, FA1-TBS40ADDG, FA1-TBS40DAG User's Manual Thank you for purchasing FA Goods product. Before using, please read this User s
More informationThread length (overall length) material
Cylindrical Proximity Sensor for Mobile Usage Designed and tested to keep your machines moving IP69k tested and certified for highest water resistance e1 type approval (according to automotive directive
More informationRUC industrial relays of small dimensions
Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity
More informationD5B. Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics. Mechanical Touch Switch. Model Number Structure
Mechanical Touch Switch D5B CSM_D5B_DS_E_3_2 Detects Objects in Multiple Directions with High Sensitivity, Ideal for Robotics Slow-action switching mechanism used. Gold-plated contact with coil spring
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationH Series PLC. ! : Indicates Compulsion. EH-150 Analog input module EH-AXH8M Instruction manual. Safety precautions DANGER CAUTION COMPULSION
H Series PLC EH-150 Analog input module EH-AXH8M Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction manual and all the
More informationSolid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges
Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved
More informationFerrous metal (The sensing distance decreases with non-ferrous metal.) Power supply voltage (operating voltage range)
Description The sensors provide excellent results even with difficult-to-detect objects, e.g. small or thin parts, wires or bright metals. A variety of types cover a wide range of individual requirements
More informationAppearance Size (mm) Power supply voltage Model (W H D) 100 to 240 VAC K3SC to 240 VAC
Interface Converter A compact converter that allows communications between RS-C/USB and RS-/8 devices. Ideal for industrial applications. Allows communications between RS-C/USB (Universal Serial Bus) and
More informationTimers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours
GT3W Key features: Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions 2 time settings in one timer 8 selectable operation modes on each model Mountable in sockets
More informationTechnical data. Safety parameters: see page 333. DC maximum residual ripple: 10% Supply voltage tolerance: DC consumption: Control circuit
Safety module CS DM-01 Technical data Housing PA 6.6 polyamide housing, self-extinguishing, V0 acc. to UL 94 Protection degree IP40 (housing), IP20 (terminal strip) Dimensions see page 283, design A Two-hand
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationFPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
More informationInstallation Sensing distance Connection Output configuration Operation mode NO Operation mode NC
Standard (thin shape) Inductive Proximity Sensor Thin shape for space saving surface mounting Direct side wall mounting for bracket-less installation Ordering Information DC 3-wire Models Installation
More informationTop-actuated (B3U-1000 Series)
Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.
More informationThread length. 27 (40) mm. 27 (44) mm. 27 (40) mm. 34 (50) mm. 34 (49) mm. 39 (60) mm. 39 (54) mm. 44 (65) mm. 44 (59) mm
Long Distance Cylindrical. Extra long for increased protection and sensing performance triple proximity sensors for flush mounting requirements. designed and tested for extra long life. Ordering Information
More informationTempco Instruction Manual
Tempco Instruction Manual 1/16 DIN Solid State Temperature Controller Relay Output Solid State Output For Heating Model Numbers: TEC-901, TEC-902, TEC-905 Temperature controls in this series are designed
More informationOrdering Information. I/O Relay G7T. Model Number Legend Slim-styled I/O Relay Saves Space in Panel
I/O Relay CSM DS_E_2_ Slim-styled I/O Relay Saves Space in Panel SPST-NO, SPST-NC, and SPDT contact forms available for output (SPST-NO only for input). Ultra-slim housing measuring 29 (W) x 0 (D) x 2
More informationConductive Level Controller
Conductive Level Controller 61F-D21T-V1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at ON or OFF using self-holding circuits. Sensitivity adjustment
More information83132 / / Subminiature Double Break Switches... 3/ Subminiature Switches... 3/ Sealed Subminiature Switches...
SWITCHES AND SENSORS SWITCHES AND SENSORS Snap Action Switches: 8 / 8 / 84 Subminiature Double Break Switches.................. / 870 Subminiature Switches.......................................... /6
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationE2A. Ordering Information. Cylindrical Proximity Sensor. Safe Mounting with Greater Sensing Distance. E2A Cylindrical Proximity Sensor 1
Cylindrical Proximity Sensor E2A Safe Mounting with Greater Sensing Distance Ensures a sensing distance approximately 1. to 2 times larger than that of any conventional OMRON Sensor. Problems such as the
More informationPC RELAY TERMINAL/ PC TERMINAL
Input points Output points PC Relay (PC relays mounted) PC Input points Output points Input points Output points Input points Output points Input points Output points Output points ORDERING INFORMATION
More information