UK: SET-UP & INSTRUCTIONS

Transcription

1 UK: SET-UP & INSTRUCTIONS

2 CONTENTS A A: STEALTH XP-NIGHTHAWK HEADSET B B: STEALTH XP-NIGHTHAWK TRANSMITTER C C: 3.5MM DETACHABLE MICROPHONE D E F D: 3.5MM JACK CABLE E: MICRO USB CHARGING/TRANSMITTER CABLE F: DIGITAL OPTICAL CABLE

3 IMPORTANT : IF YOU WISH TO USE THE DIGITAL OPTICAL CABLE ON XBOX ONE OR PS4, PLEASE NOTE THE BELOW. F F: DIGITAL OPTICAL CABLE CHAT - THIS BECOMES THE VOLUME CONTROL WHEN USING THE DIGITAL OPTICAL CABLE GAME - THIS IS THE VOLUME CONTROL WHEN USING THE USB CABLE OR 3.5MM JACK CABLE ONLY (NO DIGITAL OPTICAL CABLE) THE "CHAT" CONTROL IS USED TO CONTROL THE VOLUME WHEN USING THE DIGITAL OPTICAL CABLE. PLEASE IGNORE THE "GAME" VOLUME CONTROL WHEN USING THE DIGITAL OPTICAL CABLE.

4 TRANSMITTER CONNECTIONS/FUNCTIONS 1 2 LED OFF LED FLASHING DURING PAIRING (BLUE & RED) 3 HEADSET PAIRED (SOLID BLUE) MIC MUTE (SOLID RED) 1. OPTICAL PORT (FOR USE WITH THE OPTICAL CABLE) 2. MICRO USB PORT (FOR USE WITH THE MICRO USB CABLE) 3. TRANSMITTER LED INDICATOR - WHEN THE LED FLASHES BETWEEN BLUE AND RED, THIS SIGNALS THE HEADSET ISN'T PAIRED WHEN THE LED IS SOLID BLUE, THIS INDICATES THE HEADSET IS PAIRED WITH YOUR DEVICE IF THE LED IS SOLID RED THIS SIGNALS THE MIC MUTE FUNCTION IS ACTIVE (TO ACTIVATE THE MIC MUTE FUNCTION SIMPLY PRESS THE "PAIR" BUTTON ON YOIR HEADSET. PRESS AGAIN TO TURN OFF)

5 HEADSET CONNECTIONS/FUNCTIONS 4 5 PAIRING BUTTON & MIC MUTE FUNCTION TO PAIR HEADSET PRESS & HOLD TO ACTIVATE MIC PRESS ONCE POWER ON/OFF (PRESS & HOLD) 6 DETACHABLE MIC 7 8 CHARGING PORT LED CHARGING INDICATOR CHARGING - SOLID RED CHARGED - LED TURNS OFF XBOX ONE 3.5MM JACK CONNECTION (REQUIRED FOR USE WITH ONLINE CHAT) **IMPORTANT** CHAT - THIS BECOMES THE VOLUME CONTROL WHEN USING THE OPTICAL CABLE GAME - THIS IS THE VOLUME CONTROL WHEN USING THE USB CABLE OR 3.5MM JACK CABLE ONLY (NO DIGITAL OPTICAL CABLE) 12 HEADSET LED INDICATOR PAIRING - FLASHING BLUE PAIRED - SOLID BLUE

6 RECHARGEABLE BATTERY BEFORE USE PLEASE ENSURE THE BATTERY IS FULLY CHARGED. TO CHARGE THE HEADSET FOLLOW THE INSTRUCTIONS BELOW... 7 E 1. INSERT THE MICRO USB CHARGING/TRANSMITTER CABLE (E) INTO THE CHARGING PORT (7) ON THE HEADSET. THE SMALLER END OF THE CABLE GOES INTO THE HEADSET 2. PLUG THE OTHER END (USB TYPE A) OF THE CABLE INTO AN AVAILABLE USB PORT ON YOUR CHOSEN DEVICE (PLEASE NOTE: YOU DO NOT NEED TO HAVE YOUR CHOSEN DEVICE POWERED ON TO CHARGE THE HEADSET) 3. CHARGING WILL NOW BEGIN AND THE LED WILL LIGHT SOLID RED - PICTURED BELOW. CHARGING USUALLY TAKES AROUND 5 HOURS, THE HEADSET IS FULLY CHARGED WHEN THE LED TURNS OFF. CHARGING - SOLID RED CHARGED - LED TURNS OFF AFTER AROUND 14 HOURS OF USE, THE HEADSET AND TRANSMITTER LED'S WILL SLOWLY START FLASHING BLUE, THIS WILL SIGNAL THAT THE BATTERY NEEDS TO BE RECHARGED.

7 1: XBOX ONE SET-UP - ONLINE CHAT & GAME PLEASE NOTE: YOU WILL NEED TO USE THE 3.5MM JACK CABLE (D) PROVIDED TO ACCESS THE MICROPHONE FOR ONLINE CHAT. PLEASE FOLLOW THE BELOW. 1. CONNECT THE MICRO USB CHARGING/TRANSMITTER CABLE (E) IN TO THE BACK OF THE TRANSMITTER (2). THIS IS THE SMALLER END OF THE CABLE. THE OPPOSITE END PLUGS IN TO AN AVAILABLE USB PORT ON YOUR XBOX ONE CONSOLE. TYPICALLY THEY ARE SITUATED ON THE BACK BUT CAN BE FOUND IN OTHER POSITIONS. 2 E 2. ONCE YOU HAVE FULLY CHARGED THE HEADSET, POWER ON BY PRESSING AND HOLDING THE POWER BUTTON ON THE HEADSET (5). THE HEADSET LED'S WILL FLASH BLUE AND THE TRANSMITTER LED WILL FLASH BLUE AND RED TO SIGNAL THE HEADSET IS TRYING TO PAIR WITH THE XBOX ONE 3. TO PAIR THE HEADSET, PRESS & HOLD THE PAIR BUTTON (4) ON THE HEADSET. THE LED'S ON BOTH THE TRANSMITTER AND THE HEADSET WILL LIGHT SOLID BLUE TO SIGNAL THE HEADSET HAS PAIRED WITH THE XBOX ONE 5 4

8 FOR YOU TO ACCESS THE MICROPHONE FUNCTION YOU WILL NEED TO CONNECT A 3.5MM JACK CABLE BETWEEN YOUR HEADSET AND CONTROLLER, PLEASE FOLLOW THE STEPS BELOW CONNECT THE 3.5MM JACK CABLE (D) INTO THE XBOX ONE 3.5MM JACK CONNECTION (9) ON THE HEADSET. THIS END NEEDS TO BE WITH 2 HOOPS AS PICTURED BELOW 2. CONNECT THE OTHER END (3 HOOPS) INTO THE BASE OF THE CONTROLLER. CURRENT XBOX ONE CONTROLLERS HAVE A 3.5MM JACK CONNECTION SITUATED ON THE BASE OF THE CONTROLLER IF YOU ARE USING AN ORIGINAL XBOX ONE CONTROLLER YOU WILL REQUIRE THE *XBOX ONE STEREO HEADSET ADAPTER (SOLD SEPARATELY) 1. CONNECT THE XBOX ONE STEREO HEADSET ADAPTER TO YOUR XBOX ONE CONTROLLER 2. PLUG THE 3.5MM CABLE (D) FROM THE HEADSET INTO YOUR ADAPTER (MAKE SURE THE END WITH 3 HOOPS GOES INTO YOUR ADAPTER) 9 D HEADSET END CONTROLLER END THE HEADSET SHOULD NOW BE WORKING UPON CONNECTION, IF YOU ARE EXPERIENCING PROBLEMS PLEASE FOLLOW THE INSTRUCTIONS BELOW: PRESS SITUATED ON YOUR CONTROLLER AND SELECT THE 'SYSTEM' TAB 1. SELECT SETTINGS 2. DISPLAY & SOUND 3. AUDIO OUTPUT 4. HEADSET AUDIO 5. HEADSET FORMAT - SELECT "WINDOWS SONIC FOR HEADPHONES ON XBOX ONE"

9 CHECKING THE PARTY CHAT MIX PLEASE FOLLOW THE STEPS BELOW IF YOU ARE EXPERIENCING SOUND COMING THROUGH THE TV, OR, YOUR FRIENDS CANT HEAR YOU TALK BUT YOU CAN HEAR THEM? PRESS SITUATED ON YOUR CONTROLLER AND SELECT THE 'SYSTEM' TAB (LAST ICON ON THE RIGHT) YOU SHOULD THEN SEE THE OPTION 'AUDIO' (IF THIS DOES NOT APPEAR PLEASE ENSURE THE 3.5MM JACK IS PLUGGED CORRECTLY INTO YOUR XBOX ONE CONTROLLER AND ALL SOFTWARE AND CONTROLLERS HAVE THE LATEST UPDATES) 1. SELECT THE OPTION 'HEADSET CHAT MIXER' 2. ENSURE THE SLIDER IS POSITIONED IN THE MIDDLE OF THE BAR 3. TEST YOUR HEADSET AGAIN PLEASE NOTE: 'HEADSET VOLUME' & 'MIC MONITORING' SHOULD BE TURNED UP FULL (MOVE THE SLIDER ALL THE WAY TO THE RIGHT) ENSURE THE HEADSET MIC IS TURNED ON TO TEST YOUR MICROPHONE YOU CAN RECORD A MESSAGE AND PLAY IT BACK, THE BEST WAY OF DOING THIS IS BY GOING TO YOUR FRIEND LIST AND SELECTING 'SEND MESSAGE' AND THEN THE 'MICROPHONE ICON'. PLEASE NOTE: YOU DO NOT NEED TO SEND THE MESSAGE. PARTY CHAT MIXER 2: XBOX ONE SET-UP - GAME / ONLINE / MUSIC / FILM (NO MIC) PLEASE NOTE: YOU CAN USE THE HEADSET WITH COMPLETE WIRELESS CONECTIVITY IF YOU HAVE NO NEED TO USE A MICROPHONE. PLEASE FOLLOW THE BELOW. 1. CONNECT THE DIGITAL OPTICAL CABLE (F) IN TO THE BACK OF THE TRANSMITTER (1). CONNECT THE OPPOSITE END IN TO YOUR XBOX ONE CONSOLE MARKED S/PDIF, THIS SHOULD BE SITUATED ON THE BACK OF ALL XBOX ONE MODELS. THIS CONNECTION WILL ONLY GO IN ONE WAY 2. CONNECT THE MICRO USB CHARGING/TRANSMITTER CABLE (E) IN TO THE BACK OF THE TRANSMITTER (2). THIS IS THE SMALLER END OF THE CABLE, THE OPPOSITE END PLUGS IN TO AN AVAILABLE USB PORT ON YOUR XBOX ONE CONSOLE. TYPICALLY THEY ARE SITUATED ON THE BACK BUT CAN BE FOUND IN OTHER POSITIONS.

10 1 2 F E 3. ONCE YOU HAVE FULLY CHARGED THE HEADSET, POWER ON BY PRESSING AND HOLDING THE POWER BUTTON ON THE HEADSET (5). THE HEADSET LED'S WILL FLASH BLUE AND THE TRANSMITTER LED WILL FLASH BLUE AND RED TO SIGNAL THE HEADSET IS TRYING TO PAIR WITH THE XBOX ONE 4. TO PAIR THE HEADSET, PRESS & HOLD THE PAIR BUTTON (4) ON THE HEADSET. THE LED'S ON BOTH THE TRANSMITTER AND THE HEADSET WILL LIGHT SOLID BLUE TO SIGNAL THE HEADSET HAS PAIRED WITH THE XBOX ONE 5 4 THE HEADSET SHOULD NOW BE WORKING UPON CONNECTION, IF YOU ARE EXPERIENCING PROBLEMS PLEASE FOLLOW THE INSTRUCTIONS BELOW: PRESS SITUATED ON YOUR CONTROLLER AND SELECT THE 'SYSTEM' TAB 1. SELECT SETTINGS 2. DISPLAY & SOUND 3. AUDIO OUTPUT 4. HEADSET AUDIO 5. HEADSET FORMAT - SELECT "WINDOWS SONIC FOR HEADPHONES ON XBOX ONE" 6. MAKE SURE "HDMI OR OPTICAL AUDIO HEADSET" BOX IS TICKED

11 PLAYSTATION 4 SLIM SET-UP PLEASE NOTE: FOR PS4 SLIM USERS YOU NEED TO FOLLOW THE BELOW INSTRUCTIONS AS THE CONSOLE DOESN'T SUPPORT THE DIGITAL OPTICAL CABLE 1. CONNECT THE MICRO USB CHARGING/TRANSMITTER CABLE (E) IN TO THE BACK OF THE TRANSMITTER (2). THIS IS THE SMALLER END OF THE CABLE. THE OPPOSITE END PLUGS IN TO AN AVAILABLE USB PORT ON YOUR PS4 CONSOLE, TYPICALLY THEY ARE SITUATED ON THE BACK 2 E 2. ONCE YOU HAVE FULLY CHARGED THE HEADSET, POWER ON BY PRESSING AND HOLDING THE POWER BUTTON ON THE HEADSET (5). THE HEADSET LED'S WILL FLASH BLUE AND THE TRANSMITTER LED WILL FLASH BLUE AND RED TO SIGNAL THE HEADSET IS TRYING TO PAIR WITH THE PS4 3. TO PAIR THE HEADSET, PRESS & HOLD THE PAIR BUTTON (4) ON THE HEADSET. THE LED'S ON BOTH THE TRANSMITTER AND THE HEADSET WILL LIGHT SOLID BLUE TO SIGNAL THE HEADSET HAS PAIRED WITH THE PS4 5 4 THE HEADSET SHOULD NOW BE WORKING UPON CONNECTION, IF YOU ARE EXPERIENCING PROBLEMS PLEASE FOLLOW THE INSTRUCTIONS BELOW:

12 IN ORDER TO HEAR THE IN-GAME AUDIO THROUGH THE HEADSET AND USE THE MICROPHONE, YOU MUST MAKE SURE THAT YOUR PS4 SYSTEM IS SET-UP AS FOLLOWS: 1. SETTINGS > DEVICES > AUDIO DEVICES > INPUT DEVICE > SELECT "USB HEADSET (2.4G WIRELESS HEADSET)" 2. SETTINGS > DEVICES > AUDIO DEVICES > OUTPUT DEVICE > SELECT "USB HEADSET (2.4G WIRELESS HEADSET)" 3. SETTINGS > DEVICES > AUDIO DEVICES > OUTPUT TO HEADPHONES > SELECT 'ALL AUDIO' ADJUST THE HEADSET AUDIO LEVELS THE VOLUME LEVEL OF THE HEADSET AND MICROPHONE CAN BE ADJUSTED WITHIN THE PS4 SYSTEM MENU AS FOLLOWS: HEADSET VOLUME: SETTINGS > DEVICES > AUDIO DEVICES > "VOLUME CONTROL" (HEADPHONES) MICROPHONE LEVEL: SETTINGS > DEVICES > AUDIO DEVICES > "ADJUST MICROPHONE LEVEL" (ADJUST THE MICROPHONE LEVEL UNTIL THE INDICATOR SHOWS "GOOD") PLAYSTATION 4 & PLAYSTATION 4 PRO SET-UP PLEASE NOTE: YOU CAN SET UP THE ORIGINAL PS4 AND PS4 PRO USING THE DIGITAL OPTICAL CABLE. 1. CONNECT THE DIGITAL OPTICAL CABLE (F) IN TO THE BACK OF THE TRANSMITTER (1). CONNECT THE OTHER END IN TO YOUR XBOX ONE CONSOLE MARKED DIGITAL OUT (OPTICAL), THIS SHOULD BE SITUATED ON THE BACK OF THE PS4 AND PS4 PRO. THIS CONNECTION WILL ONLY GO IN ONE WAY 2. CONNECT THE MICRO USB CHARGING/TRANSMITTER CABLE (E) IN TO THE BACK OF THE TRANSMITTER (2). THIS IS THE SMALLER END OF THE CABLE. THE OPPOSITE END PLUGS IN TO AN AVAILABLE USB PORT ON YOUR PS4 CONSOLE. TYPICALLY THEY ARE SITUATED ON THE BACK BUT CAN BE FOUND IN OTHER POSITIONS. 1 2 F

13 3. ONCE YOU HAVE FULLY CHARGED THE HEADSET, POWER ON BY PRESSING AND HOLDING THE POWER BUTTON ON THE HEADSET (5). THE HEADSET AND TRANSMITTER LED'S WILL FLASH BLUE TO SIGNAL THE HEADSET IS TRYING TO PAIR WITH THE PS4 4. TO PAIR THE HEADSET, PRESS & HOLD THE PAIR BUTTON (4) ON THE HEADSET. THE LED'S ON BOTH THE TRANSMITTER AND THE HEADSET WILL LIGHT SOLID BLUE TO SIGNAL THE HEADSET HAS PAIRED WITH THE PS4 5 4 IN ORDER TO HEAR THE IN-GAME AUDIO THROUGH THE HEADSET AND USE THE MICROPHONE, YOU MUST MAKE SURE THAT YOUR PS4 SYSTEM IS SET-UP AS FOLLOWS: 1. SETTINGS > SOUND & SCREEN > AUDIO OUTPUT SETTINGS > PRIMARY OUTPUT > SELECT "DIGITAL OUT (OPTICAL)" 2. GO TO AUDIO FORMAT (PRIORITY) > SELECT "LINEAR PCM" 3. SETTINGS > DEVICES > AUDIO DEVICES > INPUT DEVICE > SELECT "USB HEADSET (2.4G WIRELESS HEADSET)" ADJUST MICROPHONE LEVELS THE VOLUME LEVEL OF THE MICROPHONE CAN BE ADJUSTED WITHIN THE PS4 SYSTEM MENU AS FOLLOWS: MICROPHONE LEVEL: SETTINGS > DEVICES > AUDIO DEVICES > "ADJUST MICROPHONE LEVEL" (ADJUST THE MICROPHONE LEVEL UNTIL THE INDICATOR SHOWS "GOOD") PC & MAC SET-UP THE HEADSET SHOULD NOW BE WORKING UPON CONNECTION, IF YOU ARE EXPERIENCING PROBLEMS PLEASE FOLLOW THE INSTRUCTIONS BELOW: 1. CONNECT THE MICRO USB CHARGING/TRANSMITTER CABLE (E) IN TO THE BACK OF THE TRANSMITTER (2). THIS IS THE SMALLER END OF THE CABLE. THE OTHER END THEN PLUGS IN AN AVAILABLE USB PORT ON YOUR PC OR MAC 2 E 1. ONCE YOU HAVE FULLY CHARGED THE HEADSET, POWER ON BY PRESSING AND HOLDING THE POWER BUTTON ON THE HEADSET (5). THE HEADSET AND TRANSMITTER LED'S WILL FLASH BLUE TO SIGNAL THE HEADSET IS TRYING TO PAIR WITH YOUR DEVICE 2. TO PAIR THE HEADSET, PRESS & HOLD THE PAIR BUTTON (4) ON THE HEADSET. THE LED'S ON BOTH THE TRANSMITTER AND THE HEADSET WILL LIGHT SOLID BLUE TO SIGNAL THE HEADSET HAS PAIRED WITH YOUR DEVICE 5 4

14 PC SETTINGS 1. RIGHT CLICK THE "SPEAKER ICON" SITUATED ON YOUR TASK BAR ALONG THE BOTTOM 2. SELECT "SOUND" 3. GO TO "PLAYBACK" AND SELECT "2.4G WIRELESS HEADSET" > CHOOSE "SET DEFAULT" 4. GO TO "RECORDING" AND SELECT "2.4G WIRELESS HEADSET" > CHOOSE "SET DEFAULT" PC SETTINGS CONFIGURATION IS NOW COMPLETE - PLEASE TEST BOTH THE MICROPHONE AND AUDIO PLAYBACK MAC SETTINGS 1. GO TO "SYSTEM PREFERENCES" 2. SELECT "SOUND" 3. GO TO "INPUT" AND SELECT "2.4G WIRELESS HEADSET" 4. GO TO "OUTPUT" AND SELECT "2.4G WIRELESS HEADSET" 5. GO TO "SOUND EFFECTS" AND TICK ALL OPTIONS UNDER "ALERT VOLUME" AND "OUPUT VOLUME" MAKE SURE THE 'OUTPUT VOLUME' IS TURNED UP FULLY ON BOTH THE 'INPUT' AND 'OUTPUT' TABS MAC SETTINGS CONFIGURATION IS NOW COMPLETE - PLEASE TEST BOTH THE MICROPHONE AND AUDIO PLAYBACK XBOX / PS4 / PC / MAC STILL NEED OUR HELP? STEALTH GAMING SUPPORT PAGE QUESTIONS / SET-UP / FAULTY ISSUES? ONLINE: STEALTHGAMING.NET/SUPPORT HELP@ABPTECH.CO.UK PHONE: MON-FRI - 9AM-5PM (ALL CALLS CHARGED AT NATIONAL RATE) TO ENSURE THAT YOUR CALL IS HANDLED QUICKLY AND EFFECTIVELY PLEASE ENSURE THAT YOU HAVE THE MODEL NUMBER, (SITUATED BY THE BARCODE ON THE BASE OF THE BOX) AND ANY OTHER RELEVANT INFORMATION REGARDING YOUR PRODUCT TO HAND WHEN YOU RING. PLEASE NOTE: IF WE ARE UNABLE TO SOLVE YOUR ISSUE, THE HELP TEAM WILL REPLACE THE HEADSET IF THE OUTCOME IS DUE TO A FACTORY FAULT. NO REFUNDS ARE ISSUED. LEGAL INFORMATION PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. IF YOU REQUIRE ANY HELP OR ASSISTANCE PLEASE CONTACT THE HELPLINE OR VISIT STEALTHGAMING.NET/SUPPORT WARRANTY THIS PRODUCT IS GUARANTEED FOR A PERIOD OF ONE YEAR FROM THE DATE OF PURCHASE. DURING THIS PERIOD IF THERE IS A DEFECT DUE TO FAULTY MATERIALS, OR WORKMANSHIP THE RETAILER FROM WHOM YOU PURCHASED IT WILL REPLACE IT WITH THE SAME OR A SIMILAR MODEL ON PRODUCTION OF YOUR PURCHASE RECEIPT OR PROOF OF PURCHASE. THIS GUARANTEE DOES NOT COVER DEFECTS ARISING FROM ACCIDENTAL DAMAGE, MISUSE OR WEAR AND TEAR, AND IS AVAILABLE ONLY TO THE ORIGINAL PURCHASER OF THE PRODUCT. THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS. TO PREVENT POSSIBLE HEARING DAMAGE, DO NOT LISTEN AT HIGH VOLUME LEVELS FOR LONG PERIODS. PRECAUTIONS ENSURE THAT THE VOLUME CONTROL IS SET TO THE MINIMUM LEVEL BEFORE CONNECTING THE HEADSET TO YOUR SYSTEM BEFORE WEARING THE HEADSET, SET THE VOLUME CONTROL TO ITS MINIMUM LEVEL THEN SLOWLY INCREASE UNTIL YOU REACH YOUR DESIRED VOLUME LEVEL LISTENING TO YOUR HEADSET AT ITS MAXIMUM LEVEL MAY CAUSE DAMAGE TO BOTH THE HEADSET AND YOUR EARS LONG TERM EXPOSURE TO LOUD MUSIC OR OTHER SOUNDS IN A HEADSET MAY CAUSE HEARING DAMAGE. IT IS BEST TO AVOID VERY HIGH VOLUME LEVELS WHEN USING A HEADSET, ESPECIALLY FOR EXTENDED PERIODS

15 IMPORTANT SAFEGUARDS & PRECAUTIONS NEVER EXPOSE TO DIRECT SUNLIGHT OR WET WEATHER CONDITIONS DO NOT EXPOSE THE UNIT TO SPLASHING, DRIPPING, RAIN OR MOISTURE. DO NOT IMMERSE IN LIQUID DO NOT EXPOSE TO DUST, HIGH HUMIDITY, HIGH TEMPERATURES OR MECHANICAL SHOCK AVOID ANY UNNECESSARY STRAIN OF THE CABLE DO NOT CARRY THE HEADSET BY ITS CABLE DO NOT USE IF THE EQUIPMENT IS DAMAGED DO NOT DISASSEMBLE; THERE ARE NO SERVICEABLE PARTS INSIDE FOR EXTERNAL CLEANING, USE A SOFT, CLEAN, DAMP CLOTH ONLY. USE OF DETERGENTS MAY DAMAGE THE CABINET FINISH AND LEAK INSIDE BATTERY CARE THE HEADSET IS ONLY TO BE CHARGED UNDER ADULT SUPERVISION ONCE THE HEADSET IS FULLY CHARGED DISCONNECT THE USB CHARGING CABLE DO NOT ATTEMPT TO CHARGE ANY OTHER BATTERY PACK OR DEVICE USING THE USB CHARGING CABLE DO NOT LEAVE THE HEADSET ON CHARGE FOR LONGER THAN 8 HOURS WE DO NOT RECOMMEND LEAVING THE HEADSET ON CHARGE OVERNIGHT OR WHILE UNATTENDED NEVER DISPOSE OF BATTERIES IN FIRE, AS THIS CAN CAUSE THEM TO EXPLODE DO NOT ATTEMPT TO REMOVE THE HEADSETS BUILT IN BATTERY PACK, IT IS NOT REPLACEABLE NOTE THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT ON AND OFF, THE USER IS ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES: 1. MOVE OR RELOCATE THE RECEIVER/TRANSMITTER UNIT 2. INCREASE THE DISTANCE BETWEEN ANY WI-FI EQUIPMENT AND RECEIVER/TRANSMITTER UNIT ACTUAL BATTERY LIFE VARIES DEPENDING ON FACTORS SUCH AS THE VOLUME LEVEL, ETC ACTUAL WIRELESS RANGE WILL VARY WITH USE, SETTINGS AND ENVIRONMENTAL CONDITIONS RECYCLING WHERE YOU SEE THIS SYMBOL ON ANY OF OUR ELECTRICAL PRODUCTS, BATTERIES OR PACKAGING, IT INDICATES THAT THE RELEVANT ELECTRICAL PRODUCT OR BATTERY SHOULD NOT BE DISPOSED OF AS GENERAL HOUSEHOLD WASTE IN THE EU OR TURKEY. TO ENSURE THE CORRECT WASTE TREATMENT OF THE PRODUCT AND BATTERY, PLEASE DISPOSE OF THEM IN ACCORDANCE WITH ANY APPLICABLE LOCAL LAWS OR REQUIREMENTS FOR DISPOSAL OF ELECTRICAL EQUIPMENT/BATTERIES. IN SO DOING, YOU WILL HELP TO CONSERVE NATURAL RESOURCES AND IMPROVE STANDARDS OF ENVIRONMENTAL PROTECTION IN TREATMENT AND DISPOSAL OF ELECTRICAL WASTE. THE RECYCLING AND PROCESSING OF WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT WILL MAKE A SIGNIFICANT CONTRIBUTION TOWARDS HELPING PROTECT THE ENVIRONMENT BY REDUCING LANDFILL WASTE. NOT RECOMMENDED FOR CHILDREN UNDER 6 YEARS OF AGE. MADE IN CHINA

16 EU & TURKEY ONLY Not recommended for children under 6 years of age. Please retain this packaging for future reference. Due to the company s policy of constant improvement and technical refinement, the company reserve the right to alter the specification. This product is not sponsored, endorsed or approved by Microsoft. XBOX ONE is a registered trademarks of Microsoft Co. Ltd. This product is not sponsored, endorsed or approved by Sony Interactive Entertainment. PS4 is a registered trademarks of Sony Interactive Entertainment. Manufactured by ABP Technology Ltd. Bolton, BL2 1BX. MADE IN CHINA.