User Manual. ToriPOS 815/915. Version V1.2 Dec Copyright Poindus Systems 2012 P1 / 43

Transcription

1 User Manual Version V1.2 Dec ToriPOS 815/915 Copyright Poindus Systems 2012 P1 / 43

2 Contents Contents Notices Safety information CE verification FCC verification Welcome Package contents Accessory items Getting to know your ToriPOS Front view Rear view Optional I/O interface Using the touch screen Specification System Assembly & Disassembly Open the system Check point Replace the HDD nd HDD for RAID (ToriPOS 915 only) RAID configuration Install the Customer display Configure the Com3 Pin9 for customer display Install the second display How to remove the 10 LENS cover Install the cash drawer Install the MSR & I-Button Reader Motherboard information Motherboard Layout Connectors & Jumper Settings AHCI driver installation Spare parts list Version change history Copyright Poindus Systems 2012 P2 / 43

3 Notices The information contained in this document is subject to change without notice. We make no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. We shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Proprietary information contained in this document is copyright protected. Photocopying, producing or translating this document or any part of it without obtaining a written consent from Poindus is prohibited. Changes in this document or in the products described herein may be made without prior notice. Incidental or consequential damage/s related to the use of this document is not Poindus liability. Including but not limited to the implied warranties of merchantability or fitness for a particular purpose, POINDUS make this publication available without warranty of any kind. TRADEMARK Poindus / ToriPOS TM are registered trademarks of Poindus Systems. Intel / Core i3/i5 are registered trademarks of Intel Corporation. Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks mentioned herein are the property of their respective owners. Copyright Poindus Systems 2012 P3 / 43

4 Safety information IMPORTANT SAFETY INSTRUCTIONS 1) Carefully read and follow these instructions. Pay attention to the danger and caution labels displayed on the product. 2) Only operate the product based on the type of power indicated on the label. Consult your dealer or local power company if unsure of the type of power available. 3) Make sure the power cord is placed safely where it would not be walked on. Do not rest anything on the power cord. 4) In disconnecting the machine from the electrical power supply, first switch off the power button, and then remove the power plug from the wall socket. 5) This product must not be placed on an unstable platform such as a stand or table for its fall may cause serious damage to the product. 6) Slots and openings are there to provide proper ventilation, prevent overheating and ensure reliable operation of the product, thus must not be blocked or covered. Do not place the product on a bed, sofa, rug or the like so as to avoid blocking the openings. Unless proper ventilation is provided, never place the product over or near a radiator, heat register or a built-in installation. 7) Never insert any kind of objects through the openings/slots to avoid touching dangerous voltage points which could cause electric shock or fire. 8) If there is smoke or strange smell, unplug the power cord from the power outlet immediately and request repair from your dealer or POINDUS. CE This device complies with the requirements of the ToriPOS TM directive 2004/108/EC with regard to Electromagnetic compatibility. FCC This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation Copyright Poindus Systems 2012 P4 / 43

5 Copyright Poindus Systems 2012 P5 / 43

6 Copyright Poindus Systems 2012 P6 / 43

7 Welcome Congratulations on your purchase of ToriPOS 815/915. The following illustration displays the package contents of your new product. If any of the following items is damaged or missing, please contact Poindus. Package contents ToriPOS ToriPOS Power adapter Driver bank CD Power cord Accessory items Part No Description Q ty 1 3CMD9M RJ-48 to DB9 Cable 1 2 3XPP SPIRAL WRAPPING BANDS SWB-16,L15mm 1 3 3CW VGA Cable 1 Copyright Poindus Systems 2012 P7 / 43

8 Front view Getting to know your ToriPOS True flat PCT touch panel Ruggedized construction aluminum base Copyright Poindus Systems 2012 P8 / 43

9 Rear view Stylish Industrial Design nd display* Customer display (VFD) Peripheral *(MSR/I-Button) *all peripherals are depends on customer s demand Copyright Poindus Systems 2012 P9 / 43

10 Optional I/O interface Standard Version Notice: The other I/O interface (COM/LPT) depends by customer s demand or project. The VGA connector type is DB15 male with DC12V output and it only works on specific nd display. If you need to display on a standard monitor, the VGA converter cable (P/N: 3CW ) in accessory box is mandatory to plug in. Please do not obtain a normal VGA converter cable to connect with standard monitor. Copyright Poindus Systems 2012 P10 / 43

11 Using the touch screen Touch Driver Installation: The shipping package includes a Driver CD. You can find every individual driver and utility that enables you to install the drivers in the Driver CD. Please insert the Driver CD into the drive and double click on the autorun.exe to pick up the models. Notice: 1. ToriPOS is PCT touch panel, it will show the below image, please remove COM6 icon. 2. At the Windows 7 Operation System environment, when customer want to use PCT touch multi-touch it is not required to install the touch driver. Copyright Poindus Systems 2012 P11 / 43

12 5. Calibration with EETI touch utility in WINXP: please into tool page and press 4 Points Calibration. 6. Calibration in WIN7: Control panel Hardware and Sound Tablet PC setting Calibrate the screen from pen or touch input Copyright Poindus Systems 2012 P12 / 43

13 With a finger to touch, you can make ToriPOS work at your command. Your touch functions like a mouse device: Touch = left-click on the mouse Touch and hold = right-click on the mouse Cleaning the touch screen The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the screen clean from foreign objects or excessive dust accumulation. To clean the screen: Turn off the system and disconnect the power cord from the wall. Spray a small amount of a household glass cleaner onto the supplied cleaning cloth and gently wipe the screen surface. Do not use an abrasive cleaner or a coarse cloth when cleaning the screen. Copyright Poindus Systems 2012 P13 / 43

14 Specification Model Name ToriPOS 815 ToriPOS 915 Intel Celeron G GHz Intel Core i5-3550s quad-core (2MB Cache) CPU 3.0GHz Intel Core i GHz (6MB Cache, up to 3.70GHz) (3MB Cache) Main Board Chipset Intel H61 Express Intel Q77 Express Intel Core G540 CPU: Display Storage I/O Ports -External System Memory 1 x DDRIII 1066 DIMM, up to 8GB 1 x DDRIII 1600 DIMM, up to 8GB Intel Core i3 CPU: 1 x DDR3-1333/1600, up to 8GB TFT LCD 15" LED Backlight Brightness 250nits Resolution 1024 x 768 Touch Screen True Flat Projected Capacitive Technology HDD / SSD Type 1 x SATA 6.4cm (2.5'') HDD or 1 x 2 x SATA 6.4cm (2.5'') HDD or 2 x SATA SATA 6.4cm (2.5'') SSD 6.4cm (2.5'') SSD RAID Support N/A RAID 0 / RAID 1 DC Power Input 1 x Mini Din 4 pin for single DC 12V Cash Drawer 1 x RJ-11 (Power Pin 12V) Network (LAN) 1 x Gigabit Ethernet by RJ-45 USB Port 4 x USB x USB x RS-232 w/ RI/5V/12V power Serial Port [COM1/2 : DB-9 male, COM3 : RJ-48] Audio Port 1 x Line-out ; 1 x Mic-In VGA Port 1 x DB-15 female VGA Port (Standard,with converter cable) Card Reader & COM5 : Internal Pin header for Card Reader & I-Button I-Button I/O Ports -Internal Audio HD Audio, 2W Speaker x 2 Bus Expansion 1 x Mini-PCI-E Slot Compliance IP 66 on front panel Intel Active Management Technology N/A YES Desktop Management Interface (DMI) Preboot Execution Environment (PXE) System Management Wake on LAN (WoL) Advanced Configuration and Power Interface (ACPI) OS Support Windows 7, Windows POSREADY, Windows XP, Ubuntu Power Supply External power adapter 120 watts, AC 100~240V / External power adapter 180 watts, AC 10A max. 100~240V / 15A max. Copyright Poindus Systems 2012 P14 / 43

15 Material Main Unit: Die-casting aluminum ;I/O Cover: Plastic Certifications CE, FCC, RoHS Dimensions ( W x H x 375 x 322 x 259 mm D ) Weight 7.8 Kg Operating 0ºC ~ 40ºC, 10% ~ 90% RH, non-condensing Temperature Storage Temperature -20ºC ~ 60ºC, 10% ~ 90% RH, non-condensing *Poindus reserves the right to change the specification without prior notice. Copyright Poindus Systems 2012 P15 / 43

16 Open the System System Assembly & Disassembly To access the inside system, you need to open the system first and the procedure of opening the system is as below: Copyright Poindus Systems 2012 P16 / 43

17 Check point When you receive the NEW ToriPOS and it doesn t display properly please double check main cable connected well. Copyright Poindus Systems 2012 P17 / 43

18 Replace the HDD The screw for HDD is M3*6mm 2 nd extend HDD for RAID (ToriPOS 915 only) Copyright Poindus Systems 2012 P18 / 43

19 RAID configuration Access BIOS Advanced SATA Configuration Select SATA Mode and press <Enter> Copyright Poindus Systems 2012 P19 / 43

20 Select RAID then Save and exit. System reboot automatic. After the rebooting the system will show you below information. Press <CTRL+ I> into RAID configuration utility. Copyright Poindus Systems 2012 P20 / 43

21 Create RAID, press <Enter> Input the Name you need. Copyright Poindus Systems 2012 P21 / 43

22 Select RAID level you need. <RAID 0 or RAID 1> below example is RAID 0 After you finish the configuration you will see all RAID information. Press <6> to exit utility. Copyright Poindus Systems 2012 P22 / 43

23 Install a Customer Display Remove the I/O cover first and follow below picture to install the 2 nd display. Copyright Poindus Systems 2012 P23 / 43

24 Configure the Com3 Pin 9 for customer display BIOS Main Menu When the BIOS Main Menu is displayed, the following items can be selected. Use the arrow keys to select items and the enter key to accept and enter the sub-menu. Enter System Overview Advanced Settings Use this menu for set up super IO configuration. Copyright Poindus Systems 2012 P24 / 43

25 Select Super IO Configuration Serial Port 1-4 Pin9 Mode Serial Port 3 Control [RI#] to +12V Save and Exit Copyright Poindus Systems 2012 P25 / 43

26 Install a Second Display Remove the I/O cover first and follow below picture to install the nd display. Copyright Poindus Systems 2012 P26 / 43

27 How to remove the 10.4 LENS cover Please use the sucker that is bundle with nd display to remove the 10 LENS cover Hold the 10 2 nd display. Attach the sucker on the LENS cover. Pull the sucker. Remove the LENS cover. Accessory items Part No Description Q ty 1 3XR sucker* 1 1 *1: For customers to remove the LENS cover of nd display. Copyright Poindus Systems 2012 P27 / 43

28 Install a Cash Drawer You can install a cash drawer through the cash drawer port. Please verify the pin assignment before installation. Cash Drawer Pin Assignment 6 1 Pin Signal GND CD control 2 12V CD status CD control 1 GND Cash Drawer Controller I/O Address Register Location: A24h Attribute: Read / Write Size: 8bit BIT BIT7 BIT6 BIT5 BIT4 BIT3 BIT2 BIT1 BIT0 Attribute Write Write Reserved Reserved Read Cash Drawer CD status Reserved Reserved Cash Drawer CD control 2 Cash Drawer CD control 1 Copyright Poindus Systems 2012 P28 / 43

29 Bit 0: Cash Drawer CD status. = 1: the Cash Drawer is close or no cash drawer connected = 0: the Cash Drawer opened Bit 1: Reserved Bit 2: Reserved Bit 3: Reserved Bit 4: Reserved Bit 5: Reserved Bit 6: Cash Drawer CD control 1. = 1: Opening the Cash Drawer = 0: Before push in the cash drawer this bit must be 0. Bit 7: Cash Drawer CD control 2. = 1: Opening the Cash Drawer = 0: Before push in the cash drawer this bit must be 0. Note: The default is CD control 1 for user to control cash drawer. The CD control 2 for dual cash drawer issue* *Must collocate with specific RJ11 cable Cash Drawer Control Command Example Use Debug.EXE program under DOS Command Cash Drawer O A24 40 Open cash drawer (CD control 1) O A24 00 Open cash drawer (CD control 1) Set the I/O address A24h bit6 =1 (opening cash drawer (CD control 1)) Set the I/O address A24h bit6 =0 (Before push in the cash drawer this bit must be 0 ) Command I A24 Cash Drawer The status of cash drawer The I/O address A24h bit0 =0 (Cash Drawer is opened) The I/O address A24h bit0 =1 (Cash Drawer is close or no cash drawer connected) Use PE06.EXE (Poindus own software) test tool under Windows Please access the driver DVD, Driver\TOOLS\CashDrawer\TEST Double click the PE06.exe and see the cash drawer status. Copyright Poindus Systems 2012 P29 / 43

30 Install the MSR & I-Button Reader Remove the LCD side cover first and then tighten the MSR/I-Button module on the same position. *The screw to fix the MSR module please use the screw (M3*18mm) that is bundle with MSR module. * Notice: The right side of front panel is only for MSR/I-Button or MSR+I-Button. The left side of front panel is for RFID, FPR and Smart card reader. Copyright Poindus Systems 2012 P30 / 43

31 Motherboard Layout Motherboard information Copyright Poindus Systems 2012 P31 / 43

32 Connectors & Jumper Settings DC1 DC2 CD1 USB1, 2 USB3, 4 COM1, 2 COM3 COM4 LAN1 SATA1, 2 SPWR1, 2 SCSI1 VGA1 AUD1 AUD2 MIC1 PS2 LPT1 PCIE1 PW1 FAN1 FAN2 DIO1 SJ1 SJ2 SJ3 Mini Din 4P for Power Input Port Internal Power Input Connector RJ11 for Cash Drawer Port USB dual stack for USB Port USB Connector D-SUB 9 Pin for COM1, 2, 4 Port RJ48 for COM3 Port COM4 Connector RJ45 for LAN Port SATA 7 Pin for SATA1, 2 Connector Power Output for SATA HDD Function Connector VGA Connector AUDIO Jack for Line-Out Speaker out Connector AUDIO Jack for MIC in PS/2 for Keyboard Printer Connector Mini PCI-E Socket Power Button + LED CPU Fan Connector System Fan Connector Digital Input / Output Connector Clear CMOS SATA Power Enable for SATA2 LCD Panel Voltage Setting Copyright Poindus Systems 2012 P32 / 43

33 SJ1: Clear CMOS Setup SJ1 Description 1-2 Clear CMOS 2-3 Normal operation COM3 : RJ48 for COM3 Port PIN1 N/C PIN2 DCD PIN3 DSR PIN4 RX PIN5 RTS PIN6 TX PIN7 CTS PIN8 DTR PIN9 GND PIN10 RI COM4 : Pin Header for COM4 Port PIN1 DCD PIN2 DSR PIN3 RX PIN4 RTS PIN5 TX PIN6 CTS PIN7 DTR PIN8 RI PIN9 GND PIN10 Error-Proof Copyright Poindus Systems 2012 P33 / 43

34 AHCI driver installation for WINXP/POSREADY2009 For ToriPOS815: Please select below item to install AHCI driver. Also you can find the AHCI driver (Q77) in driver DVD. For ToriPOS915: Please select below item to install AHCI driver. Also you can find the AHCI (Q77) driver in driver DVD. Copyright Poindus Systems 2012 P34 / 43

35 Spare parts List Part Number Photo Description XTOUCHCB001C SPARE PARTS: TOUCH PANEL CAPACITIVE no grid (BLACK) ASS'Y,PP01 XTCONTROL01B SPARE PARTS: PCT TOUCH CONTROLER ASS'Y,PP01 51PE110H6100 SPARE PARTS: MAIN BOARD: PE11, IVY BRIDGE SOCKET W/ LGA1155+H61 51PE110Q7700 SPARE PARTS: MAIN BOARD: PE11, IVY BRIDGE SOCKET W/ LGA1155+Q77 6PN LCD PANEL: AUO, 15" TFT, 1024x768, LVDS, 250nits,LED Backlight 6PN LED PANEL 10.4" SVGA(800*600) Copyright Poindus Systems 2012 P35 / 43

36 3XMC HEATSINK(CPU) 3XMC HEATSINK(PCH) 2UCPUCELG540 INTEL CPU: Celeron Processor G540 (2M Cache, 2.50 GHz) 2UCPUI INTEL CPU : Intel Core i Processor(3M Cache, 3.30 GHz) 2UCPUI53550S CPU::Intel Core? i5-3550s Processor (6M Cache, up to 3.70 GHz) 6RML02G49800 RAM MODULE: 2G DDR3-1600MHz 240P,BRAND:HYNIX Copyright Poindus Systems 2012 P36 / 43

37 6RML04G49800 RAM MODULE: 4G DDR3-1600MHz 240P,BRAND:HYNIX HDD 320G 5400RPM ASSY 52ADB AD-BOARD: GTR38 for 10.4" 2 nd display 52F008V10020 VFD MODUL : FUTABA/10P8C(COM) V1.0 6PWA1804C000 POWER ADAPTER: 180W DC12V/15A (EA12101A-120) for ToriPOS915 6PWA1204C000 POWER ADAPTER: 120W DC12V/10A (EA11353A-120) for ToriPOS815 Copyright Poindus Systems 2012 P37 / 43

38 3CP POWER CORD (Brazil) TO MINI 3P 3CP POWER CORD (AU) TO MINI 3P 3CP POWER CORD (UK) TO MINI 3P 3CP POWER CORD (USA) TO MINI 3P 3CP POWER CORD (EU) TO MINI 3P 3TFN FAN for ToriPOS Copyright Poindus Systems 2012 P38 / 43

39 3CW CABLE: ALL IN ONE (KC5773) TORIPOS 3CW CABLE: LED /4PIN L=130mm 3CW CABLE: P2.0 4PIN+P2.5 4PIN L=50mm 3CW CABLE:PHONE CABLE RJ48 10P10C TO RJ48 10P10C L=160mm 3CW CABLE: VGA D15+ DuPont PIN L=270mm 3CW LPT CABLE : DuPont P2.0 2x13pin female to DB25, L=160mm Copyright Poindus Systems 2012 P39 / 43

40 3CW CABLE:COM PORT DuPont P2.0 2x10pin female+db9, L=300mm 3CMD9MJT0100 CABLE : RJ48/DB9 CABLE ToriPOS I/O cover: black ToriPOS I/O cover: white 3P00371D200A n display rear cover (Black) 3P00371F040A n display rear cover (White) Copyright Poindus Systems 2012 P40 / 43

41 3P00360K020A 10.4" 2nd display LENS cover 3P00420D2600 3P00430D2600 FAN cover (right side) FAN cover (left side) 3P00390D3400 LCD Side cover (Black) 3P00390F0400 LCD Side cover (White) 3P00380D2000 Holder cover 3P00380F0400 Holder cover Copyright Poindus Systems 2012 P41 / 43

42 3P00440D2000 I/O cover: Black 3P00440F0400 I/O cover: White Copyright Poindus Systems 2012 P42 / 43

43 Version Change History Version Change Date Change Content V1.0 Dec, st Release V1.1 May, 2013 Add CE/FCC verification and RAID configuration V1.2 Jun, 2013 Add some spare parts Copyright Poindus Systems 2012 P43 / 43