All Analog Outputs, voltage/current 20mA 35mA 5mA 48mA/30mA* *If the analog outputs are not configured, then subtract the higher value.

Size: px
Start display at page:

Download "All Analog Outputs, voltage/current 20mA 35mA 5mA 48mA/30mA* *If the analog outputs are not configured, then subtract the higher value."

Transcription

1 Vision OPLC V TA24/V350-J-TA24 Technical Specifications The Unitronics V TA24/V350-J-TA24 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog, 2 PT100/TC, and 1 HSC/ Shaft-encoder Input 10 Transistor Outputs, 2 Analog Outputs I/O configurations can be expanded to include up to 512 I/Os via Expansion Modules. Available by separate order: Ethernet, additional RS232/RS485, CANbus, Profibus Slave. You can find additional information, such as wiring diagrams, in the product s installation guide located on the Unitronics Setup CD and in the Technical Library at Technical Specifications Power Supply 24VDC Permissible range 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 npn inputs pnp inputs 1. To calculate the actual power consumption, subtract the current for each unused element from the maximum current consumption value according to the values below: Backlight Ethernet card Relay Outputs (per output) All Analog Outputs, voltage/current 20mA 35mA 5mA 48mA/30mA* *If the analog outputs are not configured, then subtract the higher value. Digital Inputs Number of inputs 12. See Note 2 Input type See Note 2 Nominal input voltage 24VDC pnp (source) 0-5VDC for Logic VDC for Logic 1 npn (sink) VDC for Logic 0 0-5VDC for Logic 1 Input current Input impedance 6.5KΩ Response time 10ms typical, when used as normal digital inputs Input cable length Normal digital input Up to 100 meters High Speed Input Up to 50 meters, shielded, see Frequency table below Distributed by: M.A. Selmon Company, Inc 4 Oxford Rd. Milford, CT Unitronics 1

2 7/13 V TA24/V350-J-TA24/V350-J-TA24 High speed inputs Specifications below apply when wired as HSC/shaft-encoder. See Note 2 Frequency (max) See Note 3 Cable length (max.) HSC Shaft-encoder pnp Shaft-encoder npn 10m 30kHz 20kHz 16kHz 25m 25kHz 12kHz 10kHz 50m 15kHz 7kHz 5kHz Duty cycle 40-60% 32-bit 2. This model comprises a total of 12 inputs. Input functionality can be adapted as follows. All 12 inputs may be used as digital inputs. They may be wired in a group via a single jumper as either npn or pnp. In addition, according to jumper settings and appropriate wiring: - Inputs 5 and 6 can function as either digital or analog inputs. - Input 0 can function as a high-speed counter, as part of a shaft-encoder, or as normal digital inputs. - Input 1 can function as either counter reset, normal digital input, or as part of a shaft-encoder. - If input 0 is set as a high-speed counter (without reset), input 1 can function as a normal digital input. - Inputs 7-8 and 9-10 can function as digital, thermocouple, or PT100 inputs; input 11 can also serve as the CM signal for PT pnp/npn maximum frequency is at 24VDC. Analog Inputs Number of inputs 2, according to wiring as described above in Note 2 Input type Multi-range inputs: 0-10V, 0-20mA, 4-20mA Input range 0-20mA, 4-20mA 0-10VDC Input impedance 37Ω 12.77kΩ Maximum input rating 30mA, 1.1V ±15V Conversion method Voltage to frequency Normal mode, except 4-20mA 14-bit (16384 units), at 4-20mA 3277 to (13107 units) Conversion time 100ms minimum per channel. See Note 4 Fast mode, except 4-20mA 12-bit (4096 units), at 4-20mA 819 to 4095 (3277 units) Conversion time 30ms minimum per channel. See Note 4 Full-scale error ±0.4% Linearity error ±0.04% Status indication Yes. See Note 5 2 Unitronics

3 V TA24/V350-J-TA24/V350-J-TA24 Technical Specifications 7/13 4. Conversion times are accumulative and depend on the total number of analog inputs configured. For example, if only one analog input (fast mode) is configured, the conversion time will be 30ms; however, if two analog (normal mode) and two RTD inputs are configured, the conversion time will be 100ms + 100ms + 300ms + 300ms = 800ms. 5. The analog value can indicate faults as shown below: Value: 12-bit Value: 14-bit Possible Cause -1-1 Deviates slightly below the input range Deviates slightly above the input range Deviates greatly above or below the input range RTD Inputs RTD Type PT100 Temperature coefficient α / Input range -200 to 600 C/-328 to 1100 F. 1 to 320Ω. Isolation Conversion method Voltage to frequency 0.1 C/0.1 F Conversion time 300ms minimum per channel. See Note 4 above Input impedance >10MΩ Auxillary current for PT µA typical Full-scale error ±0.4% Linearity error ±0.04% Status indication Yes. See Note 6 6. The analog value can indicate faults as shown below: Value Possible Cause Sensor is not connected to input, or value exceeds permissible range Sensor is short-circuited Thermocouple Inputs Input range See Note 7 Isolation Conversion method Voltage to frequency 0.1 C/ 0.1 F maximum Conversion time 100ms minimum per channel. See Note 4 above Input impedance >10MΩ Cold junction compensation Local, automatic Cold junction compensation error ±1.5 C/±2.7 F maximum Absolute maximum rating ±0.6VDC Full-scale error ±0.4% Linearity error ±0.04% Warm-up time ½ hour typically, ±1 C/±1.8 F repeatability Status indication Yes. See Note 6 above Unitronics 3

4 7/13 V TA24/V350-J-TA24/V350-J-TA24 7. The device can also measure voltage within the range of -5 to 56mV, at a resolution of 0.01mV. The device can also measure raw value frequency at a resolution of 14-bits (16384). Input ranges are shown in the following table: Type Temp. Range Type Temp. Range mv -5 to 56mV N -200 to 1300 C (-328 to 2372 F) B 200 to 1820 C (300 to 3276 F) R 0 to 1768 C (32 to 3214 F) E -200 to 750 C (-328 to 1382 F) S 0 to 1768 C (32 to 3214 F) J -200 to 760 C (-328 to 1400 F) T -200 to 400 C (-328 to 752 F) K Digital Outputs -200 to 1250 C (-328 to 2282 F) Number of outputs 10 transistor pnp (source) Output type P-MOSFET (open drain) Isolation Output current (resistive load) 0.5A maximum per output 3A maximum total per common Maximum frequency 50Hz (resistive load) 0.5Hz (inductive load) PWM maximum frequency 0.5KHz (resistive load). See Note 8 Short circuit protection Yes Short circuit indication Via software On voltage drop 0.5VDC maximum Power supply for outputs Operating voltage 20.4 to 28.8VDC Nominal voltage 24VDC 8. Outputs 0 to 4 can be used as PWM outputs. Analog Outputs Number of outputs 2 Output range 0-10V, 4-20mA. See Note 9 12-bit (4096 units) Conversion time Both outputs are updated per scan Load impedance 1kΩ minimum voltage 500Ω maximum current Linearity error ±0.1% Operational error limits ±0.2% 9. Note that the range of each I/O is defined by wiring, jumper settings, and within the controller s software. 4 Unitronics

5 V TA24/V350-J-TA24/V350-J-TA24 Technical Specifications 7/13 Graphic Display Screen LCD Type TFT, LCD display Illumination backlight White LED, software-controlled Display resolution 320x240 pixels Viewing area 3.5" Colors 65,536 (16-bit) Touchscreen Resistive, analog Touch indication Via buzzer Screen brightness control Via software (Store value to SI 9). Virtual Keypad Displays virtual keyboard when the application requires data entry. Keypad Number of keys Key type Slides 5 programmable function keys Metal dome, sealed membrane switch Slides may be installed in the operating panel faceplate to customlabel the keys. Refer to V350 Keypad Slides.pdf. Two sets of slides are supplied with the controller: one set of arrow keys, and one blank set. Program Memory size Application Logic 1Mb, Images 6Mb, Fonts 512 Kb Operand type Quantity Symbol Value Memory Bits 8192 MB Bit (coil) Memory Integers 4096 MI 16-bit signed/unsigned Long Integers 512 ML 32-bit signed/unsigned Double Word 256 DW 32-bit unsigned Memory Floats 64 MF 32-bit signed/unsigned Fast Bits 1023 XB Fast Bits (coil) not retained Fast Integers 512 XI 16 bit signed/unsigned (fast, not retained) Fast Long Integers 256 XL 32 bit signed/unsigned (fast, not retained) Fast Double Word 64 XDW 32 bit unsigned (fast, not retained) Timers 384 T Res. 10 ms; max 99h, 59 min, s Counters 32 C 32 bit Data Tables 120K dynamic data (recipe parameters, datalogs, etc.) 192K fixed data (read-only data, ingredient names, etc) Expandable via SD card. See Removable Memory below HMI displays Up to 1024 Program scan time 15µS per 1kb of typical application Removable Memory Micro SD card 10. User must format via Unitronics SD tools utility. Compatible with standard SD and SDHC; up to 32GB store datalogs, Alarms, Trends, Data Tables, backup Ladder, HMI, and OS. See Note 10 Unitronics 5

6 7/13 V TA24/V350-J-TA24/V350-J-TA24 Communication Ports Port 1 1 channel, RS232/RS485. See Note 11 No Baud rate 300 to bps RS232 ±20VDC absolute maximum Cable length 15m maximum (50 ) RS485-7 to +12VDC differential maximum Cable type Shielded twisted pair, in compliance with EIA 485 Cable length 1200m maximum (4000 ) Nodes Up to 32 Port 2 (optional) See Note 12 CANbus (optional) See Note This model is supplied with a serial port: RS232/RS485 (Port 1). The standard is set to either RS232 or RS485 according to jumper settings. Refer to the product s Installation Guide. 12. The user may order and install one or both of the following modules: - An additional port (Port 2). Available types: RS232/RS485 isolated/non-isolated, Ethernet - A CANbus port Port module documentation is available on the Unitronics website. I/O Expansion Additional I/Os may be added. Configurations vary according to module. Supports digital, high-speed, analog, weight and temperature measurement I/Os. Local Via I/O Expansion Port. Integrate up to 8 I/O Expansion Modules comprising up to 128 additional I/Os. Adapter required (P.N. EX-A2X). Remote Via CANbus port. Connect up to 60 adapters to a distance of 1000 meters from controller; and up to 8 I/O expansion modules to each adapter (up to a total of 512 I/Os). Adapter required (P.N. EX-RC1). Miscellaneous Clock (RTC) Battery back-up Battery replacement Real-time clock functions (date and time). 7 years typical at 25 C, battery back-up for RTC and system data, including variable data. Yes. Coin-type 3V, lithium battery, CR2450 Dimensions Size V x x 68mm (4.29 x 4.49 x 2.67 ). See Note 13 Weight V350-J 109 x x 66mm (4.92 x 4.49 x 2.59 ). See Note g (8 oz) 13. For exact dimensions, refer to the product s Installation Guide. 6 Unitronics

7 V TA24/V350-J-TA24/V350-J-TA24 Technical Specifications 7/13 Environment Operational temperature Storage temperature Relative Humidity (RH) Mounting method 0 to 50ºC (32 to 122ºF) -20 to 60ºC (-4 to 140ºF) 10% to 95% (non-condensing) Panel mounted (IP65/66/NEMA4X) DIN-rail mounted (IP20/NEMA1) The information in this document reflects products at the date of printing. Unitronics reserves the right, subject to all applicable laws, at any time, at its sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market. All information in this document is provided "as is" without warranty of any kind, either expressed or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Unitronics assumes no responsibility for errors or omissions in the information presented in this document. In no event shall Unitronics be liable for any special, incidental, indirect or consequential damages of any kind, or any damages whatsoever arising out of or in connection with the use or performance of this information. The tradenames, trademarks, logos and service marks presented in this document, including their design, are the property of Unitronics (1989) (R"G) Ltd. or other third parties and you are not permitted to use them without the prior written consent of Unitronics or such third party as may own them. DTS-V350-TA24 07/13 Unitronics 7

Vision OPLC. Distributed by: M.A. Selmon Company, Inc 4 Oxford Rd. Milford, CT V R34/V350-J-R34 Technical Specifications

Vision OPLC. Distributed by: M.A. Selmon Company, Inc 4 Oxford Rd. Milford, CT V R34/V350-J-R34 Technical Specifications Vision OPLC V350-35-R34/V350-J-R34 Technical Specifications The Unitronics V350-35-R34/V350-J-R34 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 3

More information

All Analog Outputs, voltage/current 10mA 35mA 5mA 48mA/30mA* *If the analog outputs are not configured, then subtract the higher value.

All Analog Outputs, voltage/current 10mA 35mA 5mA 48mA/30mA* *If the analog outputs are not configured, then subtract the higher value. Vision OPLC V350-35-TRA22/V350-J-TRA22 Technical Specifications The Unitronics V350-35-TRA22/V350-J-TRA22 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog,

More information

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 Vision OPLC V350-35-TRA22 Technical Specifications The Unitronics V350-35-TRA22 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog, 2 PT100/TC and 1 HSC/Shaftencoder

More information

20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 npn inputs

20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 npn inputs Vision OPLC V130-33-T38 Technical Specifications The Unitronics V130-33-T38 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 2 HSC/Shaft-encoder Inputs

More information

20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1

20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 Vision OPLC V130-33-R34 /V130-J-R34 Technical Specifications The Unitronics V130-33-R34 /V130-J-R34 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and

More information

Item SM35-J-TA22 SM43-J-TA22 SM70-J-TA22

Item SM35-J-TA22 SM43-J-TA22 SM70-J-TA22 Samba PLC+HMI SM35-J-TA22 SM43-J-TA22 SM70-J-TA22 Technical Specifications Ordering Information Item SM35-J- TA22 PLC with Flat panel, Color touch display 3.5 SM43-J- TA22 PLC with Flat panel, Color touch

More information

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 Vision OPLC V130-33-TR6/V130-J-TR6 Technical Specifications The Unitronics V130-33-TR6/V130-J-TR6 offers the following onboard I/Os: 8 Digital Inputs, configurable via wiring to include 2 Analog (current/voltage)

More information

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 Vision OPLC V130-33-TR20/V130-J-TR20 Technical Specifications The Unitronics V130-33-TR20/V130-J-TR20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog (current/voltage)

More information

V350-T38 V350J-T38.

V350-T38 V350J-T38. Vision OPLC V130/ V350/ Technical Specifications Order Information V130-33-T38 PLC with Classic panel, Monochrome display 2.4" V130-J-T38 PLC with Flat panel, Monochrome display 2.4" V350-35-T38 PLC with

More information

20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 npn inputs

20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 npn inputs Vision OPLC V350-35-T38 Technical Specifications The Unitronics V350-35-T38 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 2 HSC/Shaft-encoder Inputs

More information

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1

Power Supply Input voltage 20.4VDC to 28.8VDC with less than 10% ripple Max. current consumption See Note 1 Vision OPLC V130-33-TR34 Technical Specifications The Unitronics V130-33-TR34 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 3 HSC/Shaft-encoder Inputs

More information

Samba PLC+HMI SM35-J-RA22

Samba PLC+HMI SM35-J-RA22 Samba PLC+HMI SM35-J-RA22 SM43-J-RA22 Technical Specifications Ordering Information Item SM35-J-RA22 PLC with Flat panel, Color touch display 3.5 SM43-J-RA22 PLC with Flat panel, Color touch display 4.3

More information

20.4VDC to 28.8VDC with less than 10% ripple. Input impedance 10mSec typical, when used as normal digital inputs

20.4VDC to 28.8VDC with less than 10% ripple. Input impedance 10mSec typical, when used as normal digital inputs Vision OPLC V130-33-RA22 Technical Specifications This guide provides specifications for Unitronics model V130-33-RA22. General features include: 12 pnp/npn Digital, including 2 Analog, 2 PT100/TC, 1 HSC/Shaft-encoder

More information

V350-RA22 V350J-RA22.

V350-RA22 V350J-RA22. Vision PLC+HMI V130/ V350/ Technical Specifications Order Information V130-33-RA22 PLC with Classic panel, Monochrome display 2.4" V130-J-RA22 PLC with Flat panel, Monochrome display 2.4" V350-35-RA22

More information

Vision PLC+HMI V130/V130J-TA24 V350/V350J-TA24 V350S/V350JS-TA24 Technical Specifications Order Information V130-33-TA24 PLC with Classic panel, Monochrome display 2.4" V130-J-TA24 PLC with Flat panel,

More information

Item SM35-J-T20 SM43-J-T20 SM70-J-T20

Item SM35-J-T20 SM43-J-T20 SM70-J-T20 Samba OPLC SM35-J-T20 SM43-J-T20 SM70-J-T20 Technical Specifications Ordering Information Item SM35-J-T20 PLC with Flat panel, Color touch display 3.5 SM43-J-T20 PLC with Flat panel, Color touch display

More information

Vision OPLC. V TR6 Technical Specifications. Technical Specifications.

Vision OPLC. V TR6 Technical Specifications. Technical Specifications. V350-35-TR6 Technical Specifications The Unitronics V350-35-TR6 offers the following onboard I/Os: 8 Digital Inputs, configurable via wiring to include 2 Analog (current/voltage) and 1 HSC/Shaft-encoder

More information

V430J-TR34 V350-TR34 V350J-TR34. pnp inputs

V430J-TR34 V350-TR34 V350J-TR34. pnp inputs Vision PLC+HMI Order Information V130-33-TR34/V130-J-TR34 V350-35-TR34/V350-J-TR34 V430-J-TR34 Technical Specifications V130-33-TR34 PLC with Classic panel, Monochrome display 2.4" V130-J-TR34 PLC with

More information

Samba OPLC SM35-J-T20

Samba OPLC SM35-J-T20 Samba OPLC SM35-J-T20 Technical Specifications The Unitronics SM35-J-T20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include: 3 HSC/Shaft-encoder Input, 2 Analog inputs

More information

V350-RA22 V350J-RA22.

V350-RA22 V350J-RA22. Vision OPLC V130/ V350/ Technical Specifications Order Information V130-33-RA22 PLC with Classic panel, Monochrome display 2.4" V130-J-RA22 PLC with Flat panel, Monochrome display 2.4" V350-35-RA22 PLC

More information

350 TM. Features: V350-J Flat Panel. V350 Classic Panel HMI PLC. Communication

350 TM. Features: V350-J Flat Panel. V350 Classic Panel HMI PLC. Communication 350 TM Advanced PLC integrated with a 3.5" color touchscreen. Includes an onboard I/O configuration; expand up to 5 I/Os Features: HMI 1024 user-designed screens 250 images per application HMI graphs -

More information

350 TM. Features: V350-J Flat Panel. V350 Classic Panel HMI PLC. Communication

350 TM. Features: V350-J Flat Panel. V350 Classic Panel HMI PLC. Communication 350 TM Advanced PLC integrated with a 3.5" color touchscreen. Includes an onboard I/O configuration; expand up to 5 I/Os Features: HMI 1024 user-designed screens 250 images per application HMI graphs -

More information

Vision570 TM /560 TM. Color OPLC TM. Color Vision570 TM /560 TM Series Featuring:

Vision570 TM /560 TM. Color OPLC TM. Color Vision570 TM /560 TM Series Featuring: Vision570 TM /560 TM Color OPLC TM Color Vision570 TM /560 TM Series Featuring: HMI Up to 1024 user-designed screens 500 images per application HMI graphs color-code Trends Built-in alarm screens Text

More information

Vision OPLC. Technical Specifications. V T34 Technical Specifications

Vision OPLC. Technical Specifications. V T34 Technical Specifications Vision OPLC V570-57-T34 Technical Specifications The Unitronics V570-57-T34 offers the following onboard I/Os via HE-10 connectors: 16 isolated Digital Inputs, configurable via wiring to include2 HSC/Shaft-encoder

More information

1210 TM /1040 TM. Features: V1210 Flat Panel. V1040 Classic Panel HMI PLC. Communication

1210 TM /1040 TM. Features: V1210 Flat Panel. V1040 Classic Panel HMI PLC. Communication Features: HMI Up to 1024 user-designed screens 500 images per application HMI graphs - color-code Trends Built-in alarm screens Text String Library - easy localization Memory and communication monitoring

More information

3 Digital, 3 Digital/Analog, 3 PT1000/NI1000 Inputs, 5 Relay, 1 pnp/npn Outputs

3 Digital, 3 Digital/Analog, 3 PT1000/NI1000 Inputs, 5 Relay, 1 pnp/npn Outputs JZ10-11-PT15 3 Digital, 3 Digital/Analog, 3 PT1000/NI1000 Inputs, 5 Relay, 1 pnp/npn Outputs Jazz Micro-OPLCTechnical Specifications Power supply Input voltage Permissible range 20.4VDC to 28.8VDC with

More information

Jazz-J. Jazz. Features:

Jazz-J. Jazz. Features: An All-in-One that is as affordable as a "smart relay" - full-function PLC combined with a textual HMI and keyboard, with up to 40 onboard I/Os Meet the New Jazz 2 series Advantages: Faster performance

More information

Jazz-J. Jazz. Features:

Jazz-J. Jazz. Features: An All-in-One that is as affordable as a "smart relay" - full-function PLC combined with a textual HMI and keyboard, with up to 40 onboard I/Os Meet the New Jazz 2 series Advantages: Faster performance

More information

10 x Digital inputs, 24VDC, sink/source 2 x Analog inputs, 0 10V / 0 20mA, 12 bits

10 x Digital inputs, 24VDC, sink/source 2 x Analog inputs, 0 10V / 0 20mA, 12 bits UniStream 5" Technical Specifications US5-B5-B1, US5-B10-B1 US5-B5-TR22, US5-B10-TR22 US5-B5-T24, US5-B10-T24 Unitronics UniStream 5" are PLC+HMI All-in-One programmable controllers that comprise built-in

More information

Vision OPLC. V T38 Installation Guide. General Description

Vision OPLC. V T38 Installation Guide. General Description Vision OPLC V130-33-T38 Installation Guide The Unitronics V130-33-T38 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 2 HSC/Shaft-encoder Inputs 16

More information

UniStream Uni-I/O Modules

UniStream Uni-I/O Modules UniStream Uni-I/O Modules UID-0808R, UID-0016R, UID-0808T, UID-0016T, UID-1600 This guide provides specifications for Unitronics Uni-I/O Modules. Uni-I/O modules are compatible with UniStream Programmable

More information

This guide provides basic information for Unitronics controller model V T2.

This guide provides basic information for Unitronics controller model V T2. Vision OPLC 12 pnp/npn Digital, including 2 Analog, 3 HSC/Shaftencoder Inputs, 12 Transistor Outputs This guide provides basic information for Unitronics controller model V350-35-T2. General Description

More information

Vision OPLC V TR20

Vision OPLC V TR20 Vision OPLC V130-33-TR20 Installation Guide The Unitronics V130-33-TR20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog, and 3 HSC/Shaft-encoder Inputs

More information

V E3XBW Snap-in I/O Module

V E3XBW Snap-in I/O Module The V200-18-E3XBW plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 18 isolated digital inputs, includes 2 H.S.C inputs,

More information

V E6B Snap-in I/O Module

V E6B Snap-in I/O Module V200-18-E6B Snap-in I/O Module The V200-18-E6B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 18 isolated digital

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Vision OPLC V350-35-R34/V350-J-R34 Installation Guide The Unitronics V350-35-R34/V350-J-R34 offers the following onboard I/Os: 22 Digital Inputs, configurable via wiring to include 2 Analog and 3 HSC/Shaft-encoder

More information

Vision OPLC V TR6/V350-J-TR6

Vision OPLC V TR6/V350-J-TR6 Vision OPLC V350-35-TR6/V350-J-TR6 Installation Guide The Unitronics V350-35-TR6/V350-J-TR6 offers the following onboard I/Os: 8 Digital Inputs, configurable via wiring to include 2 Analog (current/voltage)

More information

V E1B Snap-in I/O Module

V E1B Snap-in I/O Module V200-18-E1B Snap-in I/O Module The V200-18-E1B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

V E2B Snap-in I/O Module

V E2B Snap-in I/O Module V200-18-E2B Snap-in I/O Module The V200-18-E2B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

This guide provides basic information for Unitronics controllers V C30B and V T40B.

This guide provides basic information for Unitronics controllers V C30B and V T40B. Vision OPLC V570-57-C30B and V570-57-T40B (Color) This guide provides basic information for Unitronics controllers V570-57-C30B and V570-57-T40B. General Description Vision OPLCs are programmable logic

More information

High Speed Remote I/O Module

High Speed Remote I/O Module High Speed Remote I/O Module EXF-RC15 The Unitronics EXF-RC15 is a High Speed Remote I/O Module that offers three High Speed Counter inputs and four high speed outputs. Overall, the EXF-RC15 offers 9 digital

More information

IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs

IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs IO-DI8-TO8, IO-DI8-TO8-L I/O Expansion Modules 8 Inputs, 8 Outputs The IO-DI8-TO8 and IO-DI8-TO8-L are I/O expansion modules that can be used in conjunction with specific Unitronics OPLC controllers. The

More information

V TU24 V350-J-TU24

V TU24 V350-J-TU24 Vision PLC+HMI V350-35-TU24 V350-J-TU24 Installation Guide 12 Digital Inputs, including 2 Analog, 2 PT100/TC,1 HSC/Shaft-encoder input 12 Transistor Outputs General Description All of the controllers covered

More information

UniStream Uni-I/O Modules

UniStream Uni-I/O Modules UniStream Uni-I/O Modules Technical Specifications UIS-08TC This guide provides specifications for Unitronics Uni-I/O module UIS-08TC. This module comprises: 8 inputs Uni-I/O modules are compatible with

More information

OPLC Installation Guide

OPLC Installation Guide Samba OPLC SM35-J-R20/SM43-J-R20 SM70-J-R20 SM35-J-T20/SM43-J-T20 SM70-J-T20 OPLC Installation Guide 12 Digital Inputs, include 1 HSC/Shaft-encoder Input, 2 Analog inputs (only when the digital inputs

More information

UniStream HMI Panel. Max. current consumption 1.

UniStream HMI Panel. Max. current consumption    1. UniStream HMI Panel USP-070-B08, USP-070-B10 USP-104-B10, USP-104-M10 UniStream HMI Panels provide the foundation of an all-in-one PLC + HMI controller. To create an all-in-one device, snap a UniStream

More information

The identified danger could cause physical and property damage.

The identified danger could cause physical and property damage. Samba OPLC SM35-J-T20 Installation Guide The Unitronics SM35-J-T20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog and 3 HSC/Shaft-encoder Inputs 8 Transistor

More information

Screen 2.4" 3.5" Color Touch 4.3" Color Touch. RS232/485 Yes Yes Yes* Yes* Yes* USB device, mini-b Com Ports, separate order, user-installed

Screen 2.4 3.5 Color Touch 4.3 Color Touch. RS232/485 Yes Yes Yes* Yes* Yes* USB device, mini-b Com Ports, separate order, user-installed Vision PLC+HMI V130-33-TA24/V130-J-TA24 V350-35-TA24/V350-J-TA24 V350-S-TA24/V350JS-TA24 V430-J-TA24 Installation Guide 12 Digital Inputs, including 2 Analog, 2 PT100/TC,1 HSC/Shaft-encoder input 10 Transistor

More information

High Speed Remote I/O Module

High Speed Remote I/O Module High Speed Remote I/O Module EXF-RC15 The Unitronics EXF-RC15 is a High Speed Remote I/O Module that offers three High Speed Counter inputs and four high speed outputs. Overall, the EXF-RC15 offers 9 digital

More information

22 Digital Inputs, including 2 Analog, 2 HSC/Shaft-encoder inputs 16 Transistor Outputs

22 Digital Inputs, including 2 Analog, 2 HSC/Shaft-encoder inputs 16 Transistor Outputs Vision PLC+HMI V130-33-T38/V130-J-T38 V350-35-T38/V350-J-T38 V430-J-T38 Installation Guide 22 Digital Inputs, including 2 Analog, 2 HSC/Shaft-encoder inputs 16 Transistor Outputs General Description All

More information

General Description V TR34/V130-J-TR34 V TR34/V350-J-TR34 V430J-R34 V R34/V130-J-R34 V R34/V350-J-R34

General Description V TR34/V130-J-TR34 V TR34/V350-J-TR34 V430J-R34 V R34/V130-J-R34 V R34/V350-J-R34 Vision OPLC V130-33-TR34/V130-J-TR34 V350-35-TR34/V350-J-TR34 V430-J-TR34 V130-33-R34/V130-J-R34 V350-35-R34/V350-J-R34 V430-J-R34 Installation Guide 22 Digital Inputs, including 3 HSC/Shaft-encoder Inputs,

More information

UniStream Uni-I/O Modules

UniStream Uni-I/O Modules UniStream Uni-I/O Modules UIS-04PTN, UIS-04PTKN This guide provides specifications for Unitronics Uni-I/O modules UIS-04PTN and UIS-04PTKN. Those modules comprise: 4 RTD inputs Uni-I/O modules are compatible

More information

This guide provides basic information for Unitronics Models 230/260/280/290 (Non-color Screens).

This guide provides basic information for Unitronics Models 230/260/280/290 (Non-color Screens). Vision OPLC Installation Guide Models 230/260/280/290 (Non-color Screens) This guide provides basic information for Unitronics Models 230/260/280/290 (Non-color Screens). General Description Vision OPLCs

More information

EX-RC1 Remote I/O Adapter

EX-RC1 Remote I/O Adapter EX-RC1 Remote I/O Adapter The EX-RC1 interfaces between Unitronics Vision OPLCs and remote I/O Expansion Modules distributed throughout your system. The adapter is connected to a PLC via CANbus. Each adapter

More information

Installation Guide V1210-T20BJ This guide provides basic information for Unitronics controllers V1210-T20BJ.

Installation Guide V1210-T20BJ This guide provides basic information for Unitronics controllers V1210-T20BJ. Vision OPLC V1210-T20BJ This guide provides basic information for Unitronics controllers V1210-T20BJ. General Description V1210 OPLCs are programmable logic controllers that comprise a built-in operating

More information

This guide provides basic information for Unitronics Models V230/260/280/290 (Non-color Screens).

This guide provides basic information for Unitronics Models V230/260/280/290 (Non-color Screens). Vision OPLC Installation Guide Models V230/260/280/290 (Non-color Screens) This guide provides basic information for Unitronics Models V230/260/280/290 (Non-color Screens). General Description Vision OPLCs

More information

Vision OPLC. General Description. Installation Guide V T34.

Vision OPLC. General Description. Installation Guide V T34. Vision OPLC Installation Guide V570-57-T34 This guide provides basic information for Unitronics controller V570-57-T34. The V570-57-T34 offers the following onboard I/Os via HE-10 connectors: 16 isolated

More information

V E4XB Snap-in I/O Module

V E4XB Snap-in I/O Module Cara Bereck Levy V200-18-E4XB Snap-in I/O Module The V200-18-E4XB plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features

More information

Installation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V C30B and V T40B.

Installation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V C30B and V T40B. Vision OPLC Installation Guide V290 (Color) This guide provides basic information for Unitronics LCD color touchscreen models V290-19-C30B and V290-19-T40B. General Description Vision OPLCs are programmable

More information

V E3XB Snap-in I/O Module

V E3XB Snap-in I/O Module V200-18-E3XB Snap-in I/O Module The V200-18-E3XB plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 18 isolated digital

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Vision OPLC V130 COM Modules: V100-17-CAN, V100-17-RS4/X, V100-17-ET2 This guide shows you how to install an additional communication module in a V130 controller. Instructions and technical specifications

More information

U90 Ladder Software Manual. Version 3.50, 6/03

U90 Ladder Software Manual. Version 3.50, 6/03 U90 Ladder Software Manual Version 3.50, 6/03 Table Of Contents Welcome to U90 Ladder... 1 Program Editors... 1 Project Navigation Tree...1 Browse Sequences...1 Printing Documentation...2 Interface Language...

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Wide Modules Installation Guide UIS-WCB1 Uni-I/O Wide is a family of Input/Output modules that are compatible with the UniStream control platform. Wide Modules are 1.5 times as wide as Uni-I/O

More information

Micro-OPLC Installation Guide

Micro-OPLC Installation Guide Jazz OPLC Micro-OPLC Installation Guide 6 Digital Inputs, 4 Relay Outputs 6 Digital, 2 Analog/Digital, 2 Analog Inputs, 6 Relay Outputs Before using this product, the user must read and understand this

More information

PLC + HMI in One Unit

PLC + HMI in One Unit PRODUCT OVERVIEW www.klinkmann.fi PLC + HMI in One Unit Total automation with just one integrated controller unit for: machine automation energy applications like boilers, remote RTUs etc water and waste

More information

User safety and equipment protection guidelines

User safety and equipment protection guidelines Snap-in I/O Module The V200-18-E1 plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. The module offers: 3 analog inputs 16 digital

More information

UAG-XKPxxx Yes 16, in addition to any modules installed on the panel UAG-CX-XKPxxx. Yes 16

UAG-XKPxxx Yes 16, in addition to any modules installed on the panel UAG-CX-XKPxxx. Yes 16 UniStream UAG-XKxxx,UAG-XKPxxx, UAG-CX-XKPxxx, UAG-XKPLxxxx This guide provides specifications for Unitronics Short Range and Long Range Local Expansion Adapter Kit for Uni-I/O. The Short and Long Range

More information

SureTorque ST-S3 Automatic Closure Torque Tester / Cap Tightener Theory of Operation

SureTorque ST-S3 Automatic Closure Torque Tester / Cap Tightener Theory of Operation SureTorque ST-S3 Automatic Closure Torque Tester / Cap Tightener Theory of Operation Manufacturer Name and Address Mesa Laboratories Inc. 12100 West 6th Ave. Lakewood, Colorado USA 80228 Phone: 011-303-987-8000

More information

V E1B Snap-in I/O Module

V E1B Snap-in I/O Module V200-18-E1B Snap-in I/O Module The V200-18-E1B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 16 isolated digital

More information

Vision OPLC. General Description.

Vision OPLC. General Description. Vision OPLC Installation Guide V570-57-T40B, V570-57-T20B, & V570-57-T20B-J This guide provides basic information for Unitronics controllers V570-57-T40B, V570-57-T20B & V570-57-T20B-J. General Description

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UID-0808THS Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides basic installation information for

More information

PLC HMI VISION SAMBA JAZZ. Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE

PLC HMI VISION SAMBA JAZZ. Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE PLC HMI ALL IN ONE Powerful Software Outstanding Support Complete Range of PLCs VISION SAMBA JAZZ Powerful Software Single, intuitive, feature-rich programming environment & utilities suite Unitronics

More information

USP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10

USP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10 UniStream HMI Panel Installation Guide USP-070-B10, USP-070-B08 USP-104-B10, USP-104-M10 USP-156-B10 Unitronics UniStream platform comprises control devices that provide robust, flexible solutions for

More information

U90 Ladder Software Manual

U90 Ladder Software Manual U90 Ladder Software Manual 3/06 No part of this document may be used for any purpose other than for the purposes specifically indicated herein nor may it be reproduced or transmitted in any form or by

More information

Vision OPLC V TR20

Vision OPLC V TR20 Vision OPLC V130-33-TR20 Installation Guide The Unitronics V130-33-TR20 offers the following onboard I/Os: 12 Digital Inputs, configurable via wiring to include 2 Analog, and 3 HSC/Shaft-encoder Inputs

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Vision OPLC Installation Guide, V350/V130/V430/SM43/SM35 COM Modules V100-17-CAN, V100-S-CAN, V100-17-RS4/X, V100-17-ET2, V100-S-ET2, V100-17-PB1 This guide shows you how to install an additional communication

More information

IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs

IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs IO-DI8-TO8 I/O Expansion Module 8 Inputs, 8 Outputs The IO-DI8-TO8 is an I/O expansion module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 8 digital inputs,

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Wide Modules Installation Guide UID-W1616R, UID-W1616T Uni-I/O Wide is a family of Input/Output modules that are compatible with the UniStream control platform. Wide Modules are 1.5 times as wide

More information

V E3XB Snap-in I/O Module

V E3XB Snap-in I/O Module V200-18-E3XB Snap-in I/O Module The V200-18-E3XB plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 18 isolated digital

More information

From single machine automation to wide distributed remote concepts

From single machine automation to wide distributed remote concepts 2009 PLC + Display = in one device From single machine automation to wide distributed remote concepts Serial and Fieldbus interfaces, Ethernet and Internet, SMS, GPRS, 3G and WLAN www.klinkmann.com V260

More information

1500ct Pump Controller

1500ct Pump Controller Quality Control & Integration, Inc. Control, Instrumentation, Telemetry, SCADA, and Automation Systems 1500ct Pump Controller Dynamic Solutions for greater control and true dynamic I/O, color, touch screen

More information

1500ct Pump Controller

1500ct Pump Controller Quality Control & Integration, Inc. Control, Instrumentation, Telemetry, SCADA, and Automation Systems 1500ct Pump Controller Dynamic Solutions for greater control and true dynamic I/O, color, touch screen

More information

PLC HMI Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE

PLC HMI Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE www.klinkmann.fi PLC HMI ALL IN ONE Powerful Software Outstanding Support Complete Range of PLCs Powerful Software Single, intuitive, feature-rich programming environment & utilities suite Unitronics provides

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UID-0808R, UID-0808T, UID-1600,UID-0016R, UID-0016T Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides

More information

Select a Micro800 Controller

Select a Micro800 Controller Select a Micro800 Controller Micro800 controllers are designed for low-cost, standalone machines. These economical small-size PLCs are available in different form factors based on the number of I/O points

More information

UniStream. Built-in. Installation Guide: US7-B5-B1, US7-B10-B1, US7-B5-TR22, US7-B10-TR22, US7-B5-T24, US7-B10-T24

UniStream. Built-in. Installation Guide: US7-B5-B1, US7-B10-B1, US7-B5-TR22, US7-B10-TR22, US7-B5-T24, US7-B10-T24 UniStream Built-in Installation Guide: US5-B5-B1, US5-B10-B1, US5-B5-TR22, US5-B10-TR22, US5-B5-T24, US5-B10-T24 US7-B5-B1, US7-B10-B1, US7-B5-TR22, US7-B10-TR22, US7-B5-T24, US7-B10-T24 SCAN to download

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UIA-0402N Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides basic installation information for

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Vision OPLC Installation Guide, V350/V130 COM Modules V100-17-CAN,V100-17-RS4/X,V100-17-ET2,V100-17-PB1 This guide shows you how to install an additional communication module in a Vision350 or Vision130

More information

PLC HMI VISION SAMBA JAZZ. Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE

PLC HMI VISION SAMBA JAZZ. Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE PLC HMI ALL IN ONE Powerful Software Outstanding Support Complete Range of PLCs VISION SAMBA JAZZ Powerful Software Single, intuitive, feature-rich programming environment & utilities suite Unitronics

More information

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points)

R1M-GH THERMOCOUPLE & DC INPUT MODULE MODEL. Remote I/O R1M Series. (16 points) Remote I/O R1M Series THERMOCOUPLE & DC INPUT MODULE (16 points) MODEL MODEL & SUFFIX CODE SELECTION R1MGH2T MODEL Modbus protocol I/O TYPE GH2 : Thermocouple or DC input, 16 points FIELD TERMINAL TYPE

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-I/O Modules Installation Guide UIS-04PTN Uni-I/O is a family of Input/Output modules that are compatible with the UniStream control platform. This guide provides basic installation information for

More information

IO-PT4. Component identification. User safety and equipment protection guidelines. Unitronics Industrial Automation Systems 1

IO-PT4. Component identification. User safety and equipment protection guidelines. Unitronics Industrial Automation Systems 1 IO-PT4 I/O Expansion Module 4 PT100 Inputs (-50 to 460 C) The IO-PT4 is an I/O expansion module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 4 PT100 inputs

More information

PLC HMI Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE

PLC HMI Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE www.klinkmann.fi PLC HMI ALL IN ONE Powerful Software Outstanding Support Complete Range of PLCs Powerful Software Single, intuitive, feature-rich programming environment & utilities suite Unitronics provides

More information

V E5B Snap-in I/O Module

V E5B Snap-in I/O Module V200-18-E5B Snap-in I/O Module The V200-18-E5B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 18 isolated digital

More information

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description

When any of the following symbols appear, read the associated information carefully. Symbol Meaning Description Uni-COM Modules Installation Guide UAC-01RS2,UAC-02RS2,UAC-02RSC Uni-COM is a family of communication modules that are compatible with the UniStream control platform. This guide provides basic installation

More information

V E62B Snap-in I/O Module

V E62B Snap-in I/O Module V200-18-E62B Snap-in I/O Module The V200-18-E62B plugs directly into the back of compatible Unitronics OPLCs, creating a selfcontained PLC unit with a local I/O configuration. Features 30 isolated digital

More information

PLC HMI ALL IN ONE. Powerful Software Outstanding Support Complete Range of PLCs

PLC HMI ALL IN ONE. Powerful Software Outstanding Support Complete Range of PLCs PLC HMI ALL IN ONE Powerful Software Outstanding Support Complete Range of PLCs Powerful Software Single, intuitive, feature-rich programming environment & utilities suite Unitronics provides a powerful

More information

PLC HMI. Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE

PLC HMI. Powerful Software Outstanding Support Complete Range of PLCs ALL IN ONE Isotron Systems B.V. Afrikalaan - 5 BD 's-hertogenbosch Tel: +(0)7 69 69 E-mail:unitronics@isotron.euu PLC HMI ALL IN ONE Powerful Software Outstanding Support Complete Range of PLCs & Powerful Software

More information

FEATURES DESCRIPTION SPECIFICATIONS

FEATURES DESCRIPTION SPECIFICATIONS KNC-PLC-KS105 - Series FEATURES Four High-Speed Counters, Max 200 khz Four High-Speed Outputs, Max 200 khz 24VDC Power Required 8 Digital Inputs, 8 Digital Outputs 3 Year Lithium Battery for Data Retention

More information

Component identification

Component identification IO-ATC8 I/O Expansion Module 8 Analog/Thermocouple Inputs The IO-ATC8 is an I/O Expansion Module that can be used in conjunction with specific Unitronics OPLC controllers. The module offers 8 inputs that

More information