The Ultimate Solution for Interior Color Changing Effects

Transcription

1 COLOURLINE GRAZE Type: Fixture: Project: Approved: The Ultimate Solution for Interior Color Changing Effects COLOURLINE GRAZE uses Solid State Luminaires COLOURMODE technology for its digital dual mode functionality, bringing color changing and tunable white together in one firmware. CLGR offers multiple optics for precise lighting of wall grazing and wall washing applications. By using 6 DMX channels in the personality mode, this high output, interior luminaire in the ColourLine family provides mood enhancement in circadian lighting applications. The COLOURLINE family uses SSL developed firmware that is tested to the most current industry standard version of RDM. This technology allows our fixtures to interoperate with leading controllers and presents ease of configuration. ColourMode (CM): SSL uses Digital Dual Mode (DDM) technology to provide RGBW and Tunable White in one fixture! SSL firmware is designed to use 6 DMX channels in the DDM Personality Mode. Maximum Mood Enhancement is available to use for any type of environment. Channels 1-4 are reserved for RGBW. Channels 5-6 are used for CCT tuning. Channel 5 controls intensity while channel 6 controls CCT. ColourClone (CC): As part of our manufacturing process, SSL Automated Manufacturing Robots calibrate every fixture to the exact same X,Y color coordinates to provide Step-1 like consistency. This process enables every fixture to be an exact clone. At the end of the process, a bar code is generated for every board. This allows for exact matching for job add-ons or warranty replacements. ColourSoft (CS): Standard dimming technology uses 8-bit resolution for 256 individual steps. Our 32-bit on-board MCU uses SSL developed software to provide 16-bit resolution to provide 65,536 steps of resolution and only use 8-bits of addressing space! We also use a logarithmic delineation of the resolution to concentrate in the lower third of the dimming curve so the low-end dimming and color transitions have zero flicker. ColourQuick (CQ): Colourline RGBW Fixtures provide the quickest color mixing in the industry. The SSL Colourquick technology enables our Colourline Interior Cove and Grazer to mix quickly, within a couple inches. Expanded Disclaimer: Due to continuous development and improvements, specifications are subject to change without notice. Solid State Luminaires reserves the right to change lab test details or specifications without notice. Product use certifies agreement to Solid State Luminaires terms and conditions. 1

2 Colourline GRAZE Interior RGBW fixture Type: Fixture: Project: Approved: SPECIFICATIONS color temperature physical beam spread (a), (axb) A RGBW B x x x x x x40 40 x15 LEDs per foot weight housing lens mounting ingress protection fixture connections (4 in 1 multichip) - 10 per foot 1 foot (.9 lbs) / 4 foot (3.6 lbs) extruded aluminum housing with tooled end caps clear polycarbonate standard surface mount bracket with full 180 rotation (+/- 90 from center) dry or damp locations IP43 rated daisy chain with male and female, 5-PIN, plug-n-play connectors performance lumen output [ all on ] 550 per foot (14 W/ft) / 381 per foot (9W/ft) / 212 per foot (5W/ft) lumen maintenance 70,000 hours / L70 temperature protocols DMX 512, RDM (ANSI E1.20) junction temperature 73 T A 25 C color mixing ColourQuick (CQ) technology provides uniform beam saturation, instantaneously with not scalloping color consistency ColourClone (CC) manufacturing process uses robotic systems to provide step-1 like consistency by calibrating every fixture to the same exact X, Y, chromaticity coordinates operating: -4 F to 104 F (-20 C to 40 C) start up: -4 F to 104 F (-20 C to 40 C) storage: -40 F to 176 F (-40 C to 80 C) dimming trim personalization resolution warranty ColourSoft (CS) embedded firmware enables 16-bit resolution using only 8-bits of data to enhance the low trim curve for no-flicker at the slowest transition speeds. ColourMode (CM) RGBW and tunable white in one fixture using 6 DMX channels. Channels RGBW : Channels 5-6* - tunable white (channel 5 = intensity and channel 6 = CCT) *Tuneable White mode must use the entire fixture as one unit. 4 distinct personality settings allow for 3 color resolutions of 1, 2 and 4 and 1-4 dual mode RGBW and tunable white 5 year limited warranty (refer to website for details) electrical input voltage Universal V AC power supply integral Class II, electronic high-power factor 120V controls certification ETL / cetl or CE, FCC-Part 15 standards UL-Class I / IES LM-79 power consumption 1 full power (14W / 9W / 5W) 4 full power (52W / 36W / 20W) Pharos controls SSL color controller 3rd party DMX 512, RDM standard based control system Expanded Disclaimer: Due to continuous development and improvements, specifications are subject to change without notice. Solid State Luminaires reserves the right to change lab test details or specifications without notice. Product use certifies agreement to Solid State Luminaires terms and conditions. 2

3 dimensions WITH STANDARD BRACKET 4.5" " 1 foot fixture 12" " 1.22 Enlarged View (Pinout Detail) 1.4" " 2.2" " " " 4 foot fixture COLOR KEY 1 Red (<+ Data [+]) 2 Orange (<- Data [-]) 3 White ( Neutral) 4 Green ( Ground) 5 Black (+Positive) " " " " " Standard 180 Adjustable Bracket 2" 180 Full Rotation 4.5" 4" 1.6" 3

4 Photometry ColourLine Graze CLGR 1FT RGBW 15 x Vert. Speed: 18.8 Horz. Speed: 31.7 CLGR 1FT RGBW 30 x Vert. Speed: 30.8 Horz. Speed: 40.2 REFER TO ADDITIONAL PHOTOMETRY AVAILABLE ON SOLIDSTATELUMINAIRES.COM - COLOURLINE WET 4

5 Photometry CLGR AVAILABLE OPTICS FIND IES FILES ON SOLIDSTATELUMINAIRES.COM X X X X X 15 5

6 CLGR-1-RGBW-RED ONLY Spectroradiometric Parameters Spectral Distribution CLGR-1-RGBW-GREEN ONLY Spectroradiometric Parameters CLW-1-UNV-BLUE Nominal CCT:IEC_P2700 x0= y0= ========================================================================= Model No.: 0 Sample 350 SN: Test Report No.: Manufacturer: Spectral Distribution Date: Nominal CCT:IEC_F4000 Tested By: STEVE Reviewed x0= By: y0= Description: Chromaticity Coordinates: x= y= u'= v'= Correlated Test Condition Color Temperature: 7368 K Dominant Wavelength: nm(e) Temperature: Colour Fidelity CIndex: Rf=0 Gamut RH: Index: % Rg=0 CLGR-1-RGBW-BLUE ONLY Luminous Spectrum Range: Flux: lm nm Purity: Scan Step: 5 nm Spectroradiometric Chromaticity Difference: Parameters Duv Peak Wavelength: nm 1.0 Color Ratio: Kr=1.5% Kg=84.6% Kb=13.8% Color Tolerance(SDCM): Bandwidth: 30.1nm Radiant Flux: W 0.8 Photosynthetically Active Radiation(PAR): 0.17W Photosynthetic Photon Flux(PPF):0.77µmol/s 0.6 Rendering Index: Ra=-30.3 R1=-38 R2=-14 R3=-30 R4=-72 R5=-13 R6=-20 R7=-15 R8=-40 R9= R10=-117 R11=-104 R12=-40 R13=-40 R14=35 R15=-37 Re=-61 CLW-1-UNV-WHITE Electric 0.2 Parameters ========================================================================= Voltage: V Current: A 0Model No.: Power Factor: 0.92 Power: 3.97 W Sample 350 SN: Test Report No.: Luminous Manufacturer: Efficacy: Spectral 24.0 lm/w Distribution Date: SENSING Instruments Co.,Ltd Nominal CCT:IEC_F4000 Tested By: STEVE Reviewed x0= By: y0= Chromaticity Description: Coordinates: x= y= u'= v'= Correlated Test Condition Color Temperature: K Dominant Wavelength: nm(e) Temperature: Colour Fidelity CIndex: Rf=0 Gamut RH: Index: % Rg=5 Luminous Spectrum CLGR-1-RGBW-WHITE Range: Flux: lm nm ONLY Purity: Scan Step: 5 nm Spectroradiometric Chromaticity Difference: Parameters Duv Peak Wavelength: nm 1.0 Color Ratio: Kr=0.0% Kg=3.1% Kb=96.9% Color Tolerance(SDCM): Bandwidth: 25.1nm Radiant Flux: 0.35 W 0.8 Photosynthetically Active Radiation(PAR): 0.35W Photosynthetic Photon Flux(PPF):1.38µmol/s Rendering Index: Ra= R1=-28 R2=-52 R3=-135 R4=-84 R5=-9 R6=-65 R7=-46 R8=-37 R9= R10=-246 R11=-118 R12=-120 R13=-48 R14=-28 R15=-9 Re=-89 Electric Parameters 0.2 Voltage: V Current: A 0Power Factor: 0.93 Power: 4.12 W Luminous Efficacy: 5.2 lm/w SENSING Instruments Co.,Ltd Spectral Distribution Nominal CCT:IEC_F3000 x0= y0= Chromaticity Coordinates: x= y= u'= v'= Correlated Color Temperature: 2898 K Dominant Wavelength: nm(e) Colour Fidelity Index: Rf=83 Gamut Index: Rg=96 Luminous Flux: lm Purity: Chromaticity Difference: Duv Peak Wavelength: nm Color Ratio: Kr=45.4% Kg=47.5% Kb=7.1% Color Tolerance(SDCM): 3.4 Bandwidth: 130.2nm Radiant Flux: W Photosynthetically 6 Active Radiation(PAR): 0.29W Photosynthetic Photon Flux(PPF):1.43µmol/s Rendering Index: Ra=82.8 Model No.: Sample SN: Test Report No.: Manufacturer: Date: Tested By: STEVE Reviewed By: Description: Chromaticity Coordinates: x= y= u'= v'= Test Condition Correlated Color Temperature: 1000 K Dominant Wavelength: nm(e) Temperature: C RH: % Colour Spectrum Fidelity Range: Index: Rf=0 nm Gamut Scan Index: Step: Rg=0 5 nm Luminous Flux: lm Purity: Spectroradiometric Parameters Chromaticity Difference: Duv Peak Wavelength: nm 1.0 Color Ratio: Kr=99.9% Kg=0.1% Kb=0.0% Color Tolerance(SDCM): Bandwidth: nm Photosynthetically Active Radiation(PAR): 0.26W Rendering 0.6 Index: Ra=12.0 CLW-1-UNV-GREEN ========================================================================= Radiant Flux: W Photosynthetic Photon Flux(PPF):1.38µmol/s R1=3 R2=77 R3=29 R4=-31 R5=-3 R6=87 R7=5 R8= R9=-228 R10=70 R11=-19 R12=79 R13=36 R14=58 R15=-37 Re=4 0.2 ========================================================================= Model No.: 0 Sample 350 SN: Test Report No.: Manufacturer: Spectral Distribution Date: Nominal CCT:IEC_F4000 Tested By: STEVE Reviewed x0= By: y0= Description: Chromaticity Coordinates: x= y= u'= v'= Correlated Test Condition Color Temperature: 7368 K Dominant Wavelength: nm(e) Colour Temperature: Fidelity CIndex: Rf=0 Gamut RH: Index: % Rg=0 Luminous Spectrum Range: Flux: lm nm Purity: Scan Step: 5 nm Chromaticity Spectroradiometric Difference: Parameters Duv Peak Wavelength: nm Color 1.0 Ratio: Kr=1.5% Kg=84.6% Kb=13.8% Color Tolerance(SDCM): Bandwidth: 30.1nm 0.8 Photosynthetically Active Radiation(PAR): 0.17W CLW-1-UNV-BLUE Radiant Flux: W Photosynthetic Photon Flux(PPF):0.77µmol/s Rendering 0.6 Index: Ra=-30.3 R1=-38 R2=-14 R3=-30 R4=-72 R5=-13 R6=-20 R7=-15 R8=-40 R9= R10=-117 R11=-104 R12=-40 R13=-40 R14=35 R15=-37 Re=-61 CLW-1-UNV-WHITE Electric 0.2 Parameters ========================================================================= Voltage: V Current: A Power 0Model No.: Factor: 0.92 Power: 3.97 W Sample 350 SN: Test Report No.: Luminous Manufacturer: Efficacy: Spectral 24.0 lm/w Distribution Date: SENSING Instruments Co.,Ltd Nominal CCT:IEC_F4000 Tested By: STEVE Reviewed x0= By: y0= Chromaticity Description: Coordinates: x= y= u'= v'= Correlated Test Condition Color Temperature: K Dominant Wavelength: nm(e) Colour Temperature: Fidelity CIndex: Rf=0 Gamut RH: Index: % Rg=5 Luminous Spectrum Range: Flux: lm nm Purity: Scan Step: 5 nm Chromaticity Spectroradiometric Difference: Parameters Duv Peak Wavelength: nm Color 1.0 Ratio: Kr=0.0% Kg=3.1% Kb=96.9% Color Tolerance(SDCM): Bandwidth: 25.1nm Radiant Flux: 0.35 W Photosynthetically 0.8 Active Radiation(PAR): 0.35W Photosynthetic Photon Flux(PPF):1.38µmol/s Rendering Index: Ra= R1=-28 R2=-52 R3=-135 R4=-84 R5=-9 R6=-65 R7=-46 R8=-37 R9= R10=-246 R11=-118 R12=-120 R13=-48 R14=-28 R15=-9 Re=-89 Electric Parameters 0.2 Voltage: V Current: A Power 0 Factor: Power: 4.12 W Luminous Efficacy: 5.2 lm/w SENSING Instruments Co.,Ltd Spectral Distribution Nominal CCT:IEC_F3000 x0= y0= Chromaticity Coordinates: x= y= u'= v'= Correlated Color Temperature: 2898 K Colour Fidelity Index: Rf=83 Dominant Wavelength: nm(e) Gamut Index: Rg=96 Luminous Flux: lm Purity: Chromaticity Difference: Duv Peak Wavelength: nm Color Ratio: Kr=45.4% Kg=47.5% Kb=7.1% Color Tolerance(SDCM): 3.4 Bandwidth: 130.2nm Photosynthetically Active Radiation(PAR): 0.29W Rendering Index: Ra=82.8 Radiant Flux: W Photosynthetic Photon Flux(PPF):1.43µmol/s R1=81 R2=90 R3=97 R4=81 R5=81 R6=88 R7=84 R8=60 R9=11 R10=78 R11=80 R12=75 R13=83 R14=99 R15=74 Re=77 Electric Parameters Voltage: V Current: A Power Factor: 0.93 Power: 4.04 W Luminous Efficacy: 25.3 lm/w SENSING Instruments Co.,Ltd

7 Mounting Options CANTILEVER Arm - Available in 3 Lengths CA2 (A) arm length CA2/6 6" CA2/12 12" CA2/18 18" mounting height (B) mounting width (C) bracket plate length (D) bracket plate width (E) 4" 4" 3" 5.5" CLGR CA2 Requirement 1' 1 4' A 6" - 12" - 18" C " 1" 1.00 SQ " B " 4" 4.00 E 5.5" " < 3" > D Refer to PUBLISHED installation instructions for mounting and installation information. 7

8 Accessories Louvre - CLL (INSTALLED DIMENSIONS) 1FT 4FT 12.3" 12.3 height 3" 3" length 12.3" 48" width 1.6" 1.6" 3" 1.6" 3" 1.6" HOUSE SHIELD - CLHS 1FT 4FT height 4.3" 4.3" shield height 3" 3" length 12.3" 48" width 1.6" 1.6" 1.3" 12.3" 4.3" 4.3" 8

9 Connectivity Options CONNECTIONS & CABLES A1: MIN/.12"- max/.13" between fixtures A4: MIN/.12"- max/.13" between fixtures B: SC10CL - 10ft Starter Cord B: SC50CL - 50ft Starter Cord C: EC12CL 12 in. Extension Cord C: EC24CL 24 in. Extension Cord C: EC60CL 60 in. Extension Cord D: TCAPDCL 1.13" Terminator Cap Enlarged View (Pinout Detail) COLOR KEY 1 Red (<+ Data [+]) 2 Orange (<- Data [-]) 3 White ( Neutral) 4 Green ( Ground) 5 Black (+Positive) Daisy Chain Fixtures (1') A:1 Daisy Chain Fixtures (4') A:2 B: LEADER CABLEs C: EXTENSION CABLEs B Male CONNECTOR C D: terminator cap TCAPDCL Data includes 120 Ω resistor D 9

10 Graze (CLGR) - INSTALLATION and OPERATION INSTRUCTIONS FIXTURE TO A POWER SUPPLY, MAKE SURE THE POWER IS SWITCHED OFF. CLGR) - INSTALLATION CV) & ColourLine Graze (CLGR) and OPERATION INSTRUCTIONS DETAILED ILLUSTRATION CLCV corporate t (877) SSL-GREEN f (630) Swenson Ave. St. Charles, IL CLGR A POWER SUPPLY, MAKE SURE THE POWER IS SWITCHED OFF. Control Components ure all electricity has Line Graze (CLGR) has been locked out DETAILED ILLUSTRATION n, be sure to read city has ams thoroughly ked out CLCV corporate t (877) SSL-GREEN f (630) Swenson Ave. St. Charles, IL CLGR CLCV / CLGR RGBW - Single Segment Configuration CLGR - TYPICAL ONE SEGMENT CONFIGURATION cordance with local read rical Code. Chart hly uctions appearing in ssible conditions and h local A: max run length 14W y positioned with all onents. Extension Cables 48' / 94' / 108' CLCV / CLGR72' RGBW - Single Segment Configuration / 146' / 169' 9W 5W aring in ons and 120V / 240V / 277V AC Input (120V ) g fixtures before with all AC Input 132' / 264' / 305' (120V ) Max Run Length: See Chart A RDM Controller ColourLine Select or Pharos Controller RDM Controller ColourLine Select or Pharos Controller Starter Cable SC10CL ( 10 ) or SC50CL (50 ) Starter Cable PDX SC10CL ( 10 ) or SC50CL (50 ) ented for future shooting. ore cument all fixture IDs re he bottom of each xture has a unique ture IDsID number actory nd barcode. AC Input ( V ) PDX (One PDX box required per each fixture run) AC Input each ( V ) Chart A RDM Splitter, unique PDX - POWER DATA WIRING BOX (ONE PDX REQUIRED PER RUN) mber PDX box, Starter max run length 120V / 240V / 277V Extension Cables and fixtures. 48' / 94' / 108' 14W that consolidates The PDX is an exterior-rated enclosure ary, for corners and A multiplechart input sources into one9w output to the CLW 72' /fixtures. 146' / 169' r, Data input from the RDM Color controller and AC input )rter 132' / 264' / 305' max run length 5W 120V / 240V / 277V rt A rs and 0CL) and or every run. Max Run Length: See Chart A End Runs with Terminator Cap End-to-End Connection (or) Extension Cable ( ECXCL) x = 12, 24, or 60 End Runs with Terminator Cap End-to-End MaxConnection Extension (or) Cable Length: Extension CableSee ( ECXCL) Chart A x = 12, 24, or 60 Max Extension Cable Length: See Chart A Extension Cables combine to provide one output on the Starter cable. One 48' /run. 94' / 108' 14Wper each fixture PDX box is required 9W 5W ' / 146' / 169' 132' / 264' / 305' Rev 0918 SOLID STATE LUMINAIRES. ANY UNAUTHORIZED TRANSFER, USE OR REPRODUCTION IS STRICTLY PROHIBITED SOLID STATE LUMINAIRES Rev 0918 LUMINAIRES. ANY UNAUTHORIZED TRANSFER, USE OR REPRODUCTION IS STRICTLY PROHIBITED SOLID STATE LUMINAIRES

11 Color Controllers CSC - COLOUR SELECT CONTROLLER The Colourline fixtures are RDM-enabled and require an RDM controller to provide DMX512 data to function. The CLW will operate with any RDM ANSI E1.20 standard control system. The ColouLine Select Controller (CSC) is a highly-functional RDM color controller with 80 available preset locations. The CSC must be placed in a dry location. Technical features: 512 in/out PC and Stand Alone DMX channels (using no PC) SD Card reader and SD compatible (Fat format) 4 Mb of internal memory (min. capacity: 4,000 steps/512 ch) Splitter mode (2x512 DMX output) Scene Speed, manual color (RGBW), page, Dimmer modes 8 trigger buttons with blue LED 4 buttons for Mode, valid, + and - Standard Mini USB 2.0 (Input) - 5V. DC Master/Slave mode to interconnect and synchronize up to 32 interfaces (32768 dmx channels without pc use) 1.5" 6.5" Colour Select Controller Installation Guide CSC (additional features): 1024 or 2x512 in/ Out Stand Alone DMX channels Multiple Zone (x5): Play 5 scenes per time DMX In trigger (Stand Alone) 2 ARTNET Universe (PC mode) Software options: Windows, MAC Os X (10.6 and +) and Linux (64) compatible LED Player + Pro DMX + Studio DMX compatible 30 minutes loop of Audio and Video Timeline with Pro DMX DMX in record and DMX in triggers (PC) 1 ARTNET Universe Stand Alone modes: 1 Zone: Play 1 scene per time Scene selection with Next and Previous buttons + Valid Page and scene selection (10 pages of 8 triggers each) Color selection (8 customs and a wheel of 100 colors) Scene speed and general Dimmer adjustment Cross Fade time between scenes 16 bits and fine channel management Automatic Scene Recovery if the power is accidently cut off Merging DMX input signals Trigger options: Real Time Clock RTC for each scene (Day, Week, Month, Year) 7 dry contacts to 5V. (On, On/Off, Release or Restart scenes) Up to 255 contact when multiplexed RS232 triggers in PC and Stand Alone Light intensity via an external PCB with Light sensor (Optional) Infrared via an external PCB module + remote (Optional) Mechanical options: 3 Pins XLR (XLR5 optional) RJ45 connectors for I/O and triggers Dimensions and Weight: H: 4 cm ; W: 14 cm ; L: 9 cm ; 0.2 Kgs Power input of 9 to 36V A (standard DC connector) Dimensions: H : 127 mm, W : 110 mm, D : 19 mm Black housing with 4 mounting holes, ABS Plastic Operating temperatures: -25 to +70 Cº Certifications: CE, RoHS, LVD 11

12 Color Controllers TPC-BN - PHAROS TOUCH PANEL CONTROLLER Touch Panel Controller Overview The Pharos TPC (Touch Panel Controller) is an elegant lighting controller with a customisable, 4.3 capacitive touch screen, 512 channels of edmx output and vast interfacing potential, all over a single Power-over-Ethernet (PoE) network connection. TPCs are available in a range of different coloured bezels and overlays. Features Touch Interface Touch screen user interface is fully customisable using the free Pharos Designer software. Create multiple pages of controls including buttons, sliders, keypads and colour pickers, and configure their appearance and visual feedback. Make it eye-catching by importing your own graphics or picking from one of our attractive themes. Pharos Engine The intelligent Pharos Engine gives you complete control of your installation. Based on individually controllable and independently running timelines and scenes, it lets you build dynamic, precise, fully customisable pre-programmed lighting displays, all while giving you the freedom of real-time manual overrides, flexible multi-zone control, prioritisation and more. Pharos Trigger Timing is everything. Whatever the stimulus, Pharos Trigger can handle it. You can control your lighting with responsive, reactive programming. Pharos Trigger is a rules engine that uses conditional logic and a broad range of interfaces and protocols. Send and receive any command, to and from any system. Conditional logic is supported, along with a powerful built-in scripting language for unlimited flexibility. Pharos Mapping Design the big picture; control every pixel. Create a 2D map of your fixtures within the Designer software, then use Pharos Mapping to create visually striking effects or play video across the entire array. Powerful controls allow you to build maps fast with pixel precise adjustment. Scalable The right fit for every installation. Multiple Pharos Controllers can be seamlessly linked together to work as one via a standard Ethernet network giving impressive scalability. For additional integration options simply add Remote Devices to further extend the network. Whether one Controller or many, it s all easily programmed using our Designer software. Remote Management The control you need in your browser from anywhere. Pharos Controllers can be connected to a network, making it possible for you to remotely manage your installation. The built-in web server lets you check the Controller s status, inputs and outputs, trigger timelines, view a full history log and much more. Flexible Be limited by your design brief, not your control system. Our products support a vast range of different fixture types and can output multiple DMX-over-Ethernet (edmx) lighting protocols at the same time. No other system gives you this level of flexibility and control over your project. Pharos Designer Programmed and configured using the free Pharos Designer software available for Windows or Mac OS X with upload over Ethernet. Reliable Hardware and firmware are self-sufficient, so no PC needs to be left on site. Rugged, compact unit designed for 24/7 operation and reliability. EXT DIN rail mounting companion product provides PoE power, DMX and DALI outputs, RS232 serial and 8 digital/analog inputs for triggering and integration. 5 Year Warranty Designed and manufactured in the UK, with quality and reliability our top priority. Certifications CE compliant, ETL/cETL listed, and California Title 20/24 compliant. 12

13 TPC-BN - PHAROS TOUCH PANEL controller LEDs Automated Generic Fountain Jets Fixture Library Supported Fixtures LEDs in any colour configuration (RGB, RGBW, 8-bit, 16-bit, tuneable white) Moving heads, yokes or scanners Downlights, spotlights, uplights, etc. via controllable dimmers, relays or ballasts Fountain jets for fountain animation or other animatronics Pharos offers a cloud library with over 13,000 fixture profiles, for easy download of your luminaires Output sacn USITT E1.31 (with per fixture priority) Art-Net ArtNet, ArtNet II and ArtNet III (configurable broadcast override) KiNET KiNET V1 (DMX out) and V2 (Port out); PDS/Data Enabler discovery Pathport Pathway Connectivity protocol DMX512 Via EXT or second port on LPC 1 RDM Via EXT, supports discovery and addressing via Designer software DALI Via EXT or RIO D (supplied separately) Scalable Synchronises with up to 40 Pharos Controllers over network Simultaneous Multiple protocols can be in operation simultaneously. Limited by patched channels, not universes used Specifications Specifications Interfaces t,, 8-bit, 16-bit, Ethernet Certifications Certifications RJ45 CE compliant, socket for CE ETL/cETL 10/100Base-TX compliant, listed ETL/cETL Ethernet listed with Link/Data LEDs; Power Power PoE (IEEE802.3af, PoE (IEEE802.3af, Class 2) 4W typical Class 2) 4W typical Data Storage Data Storage Removable SD Removable Card (supplied) SD Card (supplied) rs, llable dimmers, Temperature Temperature 0 C to 50 C (32 F 0 C to to 50 C 122 F) (32 F to 122 F) Humidity Humidity 10-50% relative, 10-50% non-condensing relative, non-condensing nimatronics Ingress Ingress IP40 IP40 s, fixture for profiles, Physical for Physical Wall mounted, Wall partly mounted, recessed partly in UK recessed 2- in UK 2- gang 35mm or gang custom 35mm US or 2.5 custom backbox US 2.5 backbox (supplied separately) (supplied separately) 0.25 kg ( lbs) kg (0.55 lbs) Shipping Shipping 20 x 15 x 12 cm 20 (8 x 15 x x 6 12 x 5 ) cm (8 x 6 x 5 ) 0.6 kg (1.3 lbs) 0.6 kg (1.3 lbs) roadcast ride) override) Recovery Recovery Hardware watchdog Hardware and watchdog recessed and reset recessed reset Data Enabler button button Warranty Warranty 5 years 5 years Startup Touchscreen Clock Astronomical Temperature Ethernet edmx DALI Serial Data MIDI Timecode Audio Level Inputs Outputs Web Interface Wall Stations Conditions Scripting Scalable Ethernet Touchscreen IR Sensor Temperature Triggering & Integration Commences playback automatically on receiving power Buttons, sliders, colour picker, etc Battery-backed real-time clock for calendar and time-based triggers Sunrise/Sunset/Twilight and Lunar phases Trigger on changes or entering a range UDP, TCP, Multicast; send/receive any Ethernet message sacn or Art-Net Trigger on any message, via EXT or RIO D RS232 via EXT; RS232 or RS485 via RIO; send/receive free syntax in ASCII, HEX or decimal MIDI Notes, SysEx or Timecode Linear Timecode via RIO A (SMPTE, Film, EBU, NTSC) Stereo 30-band spectrum analysis via RIO A Contact closure, active low, active high or 0-24V analog level via EXT or RIOs Isolated relay outputs (48V 250mA) via RIOs Built-in or custom designed Integrate with BPS or TPC Full conditional logic support Lua scripting for total flexibility Supports Pharos Remote Devices Interfaces RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Static IP or DHCP; Dual IP address for edmx 4.3 capacitive touch; bpp; 340 cd/m2; magnetic overlay Learning IR sensor for remote control Built-in ambient temperature sensor oftware ia Designer software s k over network neously. ed by Limited by ing power d time-based TPC BN et message TPC BB nd/receive e free TPC CC TPC WN U, NTSC) TPC WW 4V el via analog level via TPC FBB TPC SBB EXT Order Code Order & Variants Code & Variants TPC BN Touch Panel Controller Touch Panel Black-on-Nickel Controller Black-on-Nickel (512 channels (512 edmx) channels * edmx) * TPC BB Touch Panel Controller Touch Panel Black-on-Black Controller Black-on-Black (512 channels (512 edmx) channels edmx) TPC CC Touch Panel Controller Touch Panel Cream-on- Controller Cream-on- Cream (512 channels Cream (512 edmx) channels edmx) TPC WN Touch Panel Controller Touch Panel White-on-Nickel Controller White-on-Nickel (512 channels (512 edmx) channels edmx) TPC WW Touch Panel Controller Touch Panel White-on-White Controller White-on-White (512 channels (512 edmx) channels edmx) TPC FBB Flush back box Flush back box TPC SBB Surface back Surface box back box EXT Extension for Extension TPC connectivity for TPC (DMX, connectivity (DMX, DALI, IO, serial, DALI, mains-powered) IO, serial, mains-powered) * TPC BN is default * TPC colour BN is and default shipped colour as and shipped as standard standard Ds; Link/Data LEDs; c /m2; magnetic 13

14 Color Controllers PHAROS EXT - EXTENSION FOR PHAROS TOUCH PANEL CONTROLLER TPC Extension Overview The Pharos EXT is an extension for the Pharos TPC and together they form a standalone, mainspowered lighting controller with versatile output and show control options. The TPC is a powerful lighting controller with Ethernet-based output and integration options. However, many DMX and DALI installations don t need the added complexity of network infrastructure. The EXT provides local DMX and DALI output for the TPC, as well as power and other hardware interfaces. Features Extend The EXT is an optional extension for a single Pharos TPC. Together they can function as a standalone control system, or scale with other Pharos devices over a network. The EXT supplies power and data to the TPC via a single cable, and provides physical interfaces including both DMX and DALI. Pharos Trigger Timing is everything. Whatever the stimulus, Pharos Trigger can handle it. You can control your lighting with responsive, reactive programming. Pharos Trigger is a rules engine that uses conditional logic and a broad range of interfaces and protocols. Send and receive any command, to and from any system. Conditional logic is supported, along with a powerful built-in scripting language for unlimited flexibility. DALI Control Control up to 64 DALI devices from the EXT, with support for commissioning with DALI discovery and configuration commands. Pharos Designer includes a convenient drag-and-drop interface for DALI patching and timeline programming. DALI emergency ballasts are also supported with the ability to schedule automatic Function and Duration tests, automatic querying for battery level and lamp hours, and a full test result and error reporting web page. Flexible Inputs Each input is individually configurable in one of three modes. As a Contact Closure an external volt-free switch may be connected across the input. As a Digital Input an external voltage source (up to 24V) can be connected across the input and thresholds for high and low triggering can be set. As an Analog Input a variable external voltage can be measured within a configurable range. Serial Data The EXT has an RS232 serial port, whose data rate and format settings (baud, parity, stop bits, etc.) are configurable in software. Pharos Designer Programmed and configured using the free Pharos Designer software available for Windows or Mac OS X with upload over Ethernet or USB. Firmware Microprocessor-based system supports firmware updates via the network from Designer software or the web interface. 5 Year Warranty Designed and manufactured in the UK, with quality and reliability our top priority. Certifications CE compliant, ETL/cETL listed, and California Title 20/24 compliant. Installer Friendly Made for permanent installation, with installer-friendly (5.08mm) plug-in rising clamp terminals, a rugged, compact enclosure, and easy DIN rail mounting. 14

15 PHAROS EXT - EXTENSION FOR PHAROS TOUCH PANEL controller Capabilities Contact Closure Connect an external volt-free switch between input and ground (internal 2.2k pull-up to 5V) Digital In Connect an external voltage source between input and ground (24V maximum; internal 2MOhm pull-down to 0V); softwareconfigurable low/high threshold Analog In Connect an external voltage source between input and ground (24V maximum); software-configurable range Serial Data RS232; configurable port; send/receive free syntax in ASCII, HEX or decimal DALI Master Control for up to 64 DALI devices; DALI discovery and configuration commands DALI Slave Use DALI messages from other systems or wall panels as triggers in Pharos Emergency Lighting Emergency Lighting Schedule automatic Function and Duration tests; automatic querying for battery level and lamp hours; test result and error reporting web page Bus Power Detection A separate DALI bus power supply is required but the EXT can detect and report bus power errors Specifications Certifications CE compliant, ETL/cETL listed Power Mains-powered; VAC / 50-60Hz / 0.1A (10W typical) Required Pharos TPC Temperature 0 C to 50 C (32 F to 122 F) Humidity 10-50% relative, non-condensing Ingress IP40 Physical 8 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail)) 0.5 kg (1.1 lbs) Shipping 20 x 15 x 12 cm (8 x 6 x 5 ) 0.7 kg (1.6 lbs) Recovery Hardware watchdog and recessed reset button Warranty 5 years Interfaces TPC PoE RJ45 socket with Link/Data LEDs for direct connection to TPC only (100m max distance) Ethernet RJ45 socket for 10/100Base-TX Ethernet with Link/Data LEDs; Fixed IP or DHCP; Power-over-Ethernet (PoE) DMX512 Isolated DMX port, RDM compatible * DALI Master (up to 64 devices) or Slave * Serial RS232 * Inputs Individually selectable operating mode for contact closure, digital or analog input (24V maximum) * * Install-friendly (5.08mm) plug in rising clamp connectors (included) Order Code & Variants 15

16 Ordering Information PART NUMBERS CLGR model length CCT features output optics options (choose 1) CLGR COLOURLINE GRAZE 1 12 in. [305 mm] RGBW RGBW CQ ColourQuick 14W 14W/ft 12 12ºx 12 beam CLL Colourline Louver 4 48 in. [1219 mm] CC ColourClone 9W 9W/ft 25 25ºx 25 beam CLHS Colourline Louver w/house Shield CS ColourSoft 5W 5W/ft 40 40ºx 40 beam CM ColourMode º x 10 beam AF All Features º x 30 beam ºx 40 beam º x 40 beam ºx 15 beam Cable Accessories (Indicate the quantity needed for each item.) REQUIRED: Each linear run requires a Starter Cable (SCD10CL) and Terminator Cap (TCAP-DCL). Maximum Run Length = V / 240 SCD10CL 10 ft. Starter Connection Cord SCD50CL 50 ft. Starter Connection Cord TCAP-DCL Data Terminator Cap ( w/ 120 ohm resister) EC12-10V 12 in. Extension Cord EC24-10V 24 in. Extension Cord EC60-10V 60 in. Extension Cord Mounting Options (Indicate the quantity needed for each item.) CA2/6 Cantilever Arm - 6 CA2/12 Cantilever Arm - 12 CA2/18 Cantilever Arm - 18 Control Components (Indicate the quantity needed for each item.) PDX Power Data Wiring Box (exterior rated) CSC-1 Colour Select Controller (includes 48 standard preset scenes) CL-RS4 Colourline 4 part interior rated RDM splitter (with power supply) GU2WH Nicolaudie STICK-GU2 Wall Mount Controller - White GU2BK Nicolaudie STICK-GU2 Wall Mount Controller - Black PHAROS TPC-BN Touch Panel Controller - Black on Nickel (512 Channels EDMX) PHAROS EXT Extension for TPC Connectivity DXC foot Exterior rated DMX cable DXC foot Exterior rated DMX cable DXC foot Exterior rated DMX cable CD foot controller data cable CD foot controller data cable CD foot controller data cable ED10CL 10 foot data extension cable ED50CL 50 foot data extension cable Controller Data Cables/DMX Cables listed are exterior rated cable. (Belden 3105A or equivalent) CD cables have male XLR at one end. Extension Data Cables connect from the last fixture in segment to next PDX. 16