1.27mm Pitch Two-Piece Connectors
|
|
- Barry Garrison
- 6 years ago
- Views:
Transcription
1 1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The connection method is available with the board to board type and insulation displacement type.. Broad applications HIFE, HIF3B and HIF5 can be combined one other, because the 1.7mm pitch flat cable is used. (Fig.1) 3. Applicable Cables The applicable cable is a (UL651) 8 AWG flat cable (7cores: 0.17mm, outer jacket diameter: 0.8 to1.0mm) 4. Mis-insertion Preventive Structure The mis-insertion preventive guide prevents misinsertion. Product Specifications Rating Current rating : 0.5A Voltage rating : 15V AC HIF5 Series Operating Temperature Range : -55 to +85 ç (Note 1) Operating Humidity Range : to % (Card edge type) 1 FD Series (D sub-ribbon connector) Fig.1 (For further information, refer to catalog page B86.) Storage Temperature Range : -10 to +ç (Note ) Operating Humidity Range : to 70% (Note ) Item Specification Condition 1.Insulation Resistance.Withstanding Voltage 3.Contact Resistance 4.Vibration 5.Humidity (Steady state) 6.Temperature Cycle 7.Durability (Mating/un-mating) 8.Resistance to Soldering heat 1000M min. No flashover or insulation breakdown. 30m max. No electrical discontinuity of 1μs or more Insulation resistance : 1000M min. No damage, cracks, or parts looseness. Contact resistance : 30m max. No deformation of components affecting performance. V DC 300V AC/1 minute. 0.1A Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, hours in each of the 3 directions. 96 hours at temperature of ç and humidity of 90% to 95% (-65ç : 30 minutes 15 to 35ç : 5 minutes max. 15ç : 30 minutes 15 to 35ç : 5 minutes max.) 5 cycles 0 cycles Solder bath : ç for 10 seconds Manual soldering : 3ç for 5 seconds Note 1 : Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3 : Please note that there is a risk of deforming the lock when an excessive load is applied to the inside. B69
2 Materials / Finish Parts Material Finish Remarks Insulator PBT Black UL94V-0 Socket Contact Copper alloy Pin header Contact Brass Selective gold plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Socket and Receptacle Pin Header HIF6 q A * D A 1.7 DSA L w q Series Name : HIF6 e r t y u i w Blank : Ribbon cable insulation displacement type A : Without board mounting hole B : With board mounting hole e Number of contacts : 0, 6, 3,,,, 5,,,, 100 r D : Socket or receptacle t A : Selective gold plated y Contact pitch : 1.7mm u Contact type : DS : Right angle type DSA : Straight type R : Ribbon cable ID type i L : Board pre-fixed lock pin HIF6 q A * P A 1.7 DSA L w e r t y u i q Series Name : HIF6 w Blank : With lock A : Without board mounting hole B : With board mounting hole e Number of contacts : 0, 6, 3,,,, 5,,,, 100 r P : Pin header t A : Selective gold plated y Contact pitch : 1.7mm u Contact style : DS : Right angle type DSA : Straight type i L : Board pre-fixed lock pin B70
3 BFunction Chart Pin Header Socket or Receptacle Side Right Angle Type with lock Straight Type with lock Right Angle Type with mounting hole Straight Type with mounting hole Two pieces of 1.7mm pitch cable used a.54 pitch connector (MIL-C-833) HIFB series HIF3B series HIF5 series Ribbon cable FD (D sub) connector Right Angle Type with mounting hole Straight Type with mounting hole Right Angle Type without mounting hole Right Angle Type without mounting hole Straight Type without mounting hole Straight Type without mounting hole B71
4 Cable ID Connector No. of Contacts A B C D RoHS HIF6-00D-1.7R(0) HIF6-06D-1.7R(0) HIF6-03D-1.7R(0) HIF6-0D-1.7R(0) HIF6-0D-1.7R(0) HIF6-0D-1.7R(0) HIF6-05D-1.7R(0) HIF6-0D-1.7R(0) HIF6-0D-1.7R(0) HIF6-0D-1.7R(0) HIF6-100D-1.7R(0) B7
5 Pin Header Right Angle Type with lock Note : Size F indicates the state where the lock is open. Indicate mark position. No. of Contacts A B C D E F RoHS HIF6-00PA-1.7DS(71) HIF6-06PA-1.7DS(71) HIF6-03PA-1.7DS(71) HIF6-0PA-1.7DS(71) HIF6-0PA-1.7DS(71) HIF6-0PA-1.7DS(71) HIF6-05PA-1.7DS(71) HIF6-0PA-1.7DS(71) HIF6-0PA-1.7DS(71) HIF6-0PA-1.7DS(71) HIF6-100PA-1.7DS(71) B73
6 Pin Header Straight Type with lock Indicate mark position. Note : Size G indicates a state where the lock is open. HIF6-00PA-1.7DSA(71) HIF6-06PA-1.7DSA(71) HIF6-03PA-1.7DSA(71) HIF6-0PA-1.7DSA(71) HIF6-0PA-1.7DSA(71) HIF6-0PA-1.7DSA(71) HIF6-05PA-1.7DSA(71) HIF6-0PA-1.7DSA(71) HIF6-0PA-1.7DSA(71) HIF6-0PA-1.7DSA(71) HIF6-100PA-1.7DSA(71) No. of Contacts A B C D E F G RoHS B74
7 Receptacle Right Angle Type with Mounting hole (0, 3,, 5,,, contacts) BApplication Pattern Mounting hole center line No. of Contacts A B C D E RoHS HIF6B-0DA-1.7DS(71) HIF6B-6DA-1.7DS(71) HIF6B-3DA-1.7DS(71) HIF6B-DA-1.7DS(71) *Lock pin type is also available. HIF6B-DA-1.7DS(71) HIF6B-DA-1.7DS(71) HIF6B-5DA-1.7DS(71) HIF6B-DA-1.7DS(71) HIF6B-DA-1.7DS(71) HIF6B-DA-1.7DS(71) B75
8 Receptacle Right Angle Type Without Mounting hole (0, 3,, 5,,, contacts) BApplication Pattern No. of Contacts A B C RoHS HIF6A-0DA-1.7DS(71) HIF6A-6DA-1.7DS(71) HIF6A-3DA-1.7DS(71) HIF6A-DA-1.7DS(71) HIF6A-DA-1.7DS(71) HIF6A-DA-1.7DS(71) HIF6A-5DA-1.7DS(71) HIF6A-DA-1.7DS(71) HIF6A-DA-1.7DS(71) HIF6A-DA-1.7DS(71) B76
9 Receptacle Straight Type with Mounting hole BApplication Pattern Mounting hole center line No. of Contacts A B C D RoHS HIF6B-00DA-1.7DSA(71) HIF6B-06DA-1.7DSA(71) HIF6B-03DA-1.7DSA(71) HIF6B-0DA-1.7DSA(71) HIF6B-0DA-1.7DSA(71) *Lock pin type is also available. HIF6B-0DA-1.7DSA(71) HIF6B-05DA-1.7DSA(71) HIF6B-0DA-1.7DSA(71) HIF6B-0DA-1.7DSA(71) HIF6B-0DA-1.7DSA(71) HIF6B-100DA-1.7DSA(71) B77
10 Receptacle Straight Type without Mounting hole BApplication Pattern No. of Contacts A B C RoHS HIF6A-00DA-1.7DSA(71) HIF6A-06DA-1.7DSA(71) HIF6A-03DA-1.7DSA(71) HIF6A-0DA-1.7DSA(71) HIF6A-0DA-1.7DSA(71) HIF6A-0DA-1.7DSA(71) HIF6A-05DA-1.7DSA(71) HIF6A-0DA-1.7DSA(71) HIF6A-0DA-1.7DSA(71) HIF6A-0DA-1.7DSA(71) HIF6A-100DA-1.7DSA(71) B78
11 Pin Header Right Angle Type with Mounting hole BApplication Pattern Mounting hole center line No. of Contacts A B C D E RoHS HIF6B-00PA-1.7DS(71) HIF6B-06PA-1.7DS(71) HIF6B-03PA-1.7DS(71) HIF6B-0PA-1.7DS(71) HIF6B-0PA-1.7DS(71) πlock pin type is also available. HIF6B-0PA-1.7DS(71) HIF6B-05PA-1.7DS(71) HIF6B-0PA-1.7DS(71) HIF6B-0PA-1.7DS(71) HIF6B-0PA-1.7DS(71) HIF6B-100PA-1.7DS(71) B79
12 Pin Header Right Angle Type Without Mounting hole BApplication Pattern No. of Contacts A B C RoHS HIF6A-00PA-1.7DS(71) HIF6A-06PA-1.7DS(71) HIF6A-03PA-1.7DS(71) HIF6A-0PA-1.7DS(71) HIF6A-0PA-1.7DS(71) HIF6A-0PA-1.7DS(71) HIF6A-05PA-1.7DS(71) HIF6A-0PA-1.7DS(71) HIF6A-0PA-1.7DS(71) HIF6A-0PA-1.7DS(71) HIF6A-100PA-1.7DS(71) B
13 Pin Header Straight Type with Mounting hole BApplication Pattern Mounting hole center line No. of Contacts A B C D E RoHS HIF6B-00PA-1.7DSA(71) HIF6B-06PA-1.7DSA(71) HIF6B-03PA-1.7DSA(71) HIF6B-0PA-1.7DSA(71) HIF6B-0PA-1.7DSA(71) *Lock pin type is also available. HIF6B-0PA-1.7DSA(71) HIF6B-05PA-1.7DSA(71) HIF6B-0PA-1.7DSA(71) HIF6B-0PA-1.7DSA(71) HIF6B-0PA-1.7DSA(71) HIF6B-100PA-1.7DSA(71) B81
14 Pin Header Straight Type Without Mounting hole BApplication Pattern HIF6A-00PA-1.7DSA(71) HIF6A-06PA-1.7DSA(71) HIF6A-03PA-1.7DSA(71) HIF6A-0PA-1.7DSA(71) HIF6A-0PA-1.7DSA(71) HIF6A-0PA-1.7DSA(71) HIF6A-05PA-1.7DSA(71) HIF6A-0PA-1.7DSA(71) HIF6A-0PA-1.7DSA(71) HIF6A-0PA-1.7DSA(71) HIF6A-100PA-1.7DSA(71) No. of Contacts A B C RoHS B8
15 BConnection Circuit Type A, B Connection of Cable 1 Connection of Cable A 1 an A an 1 B bn 1 An a1 Type A, A B 1 bn Connection of Cable 1 A 1 b 1 A b Connection of Cable B 1 a 1 B a Bn b1 An bn Bn an B83
16 BConnection Circuit (6,, contacts) Type A, B Connection of Cable 1 Connection of Cable A 1 an A an 1 B bn 1 An a1 Type A, A B 1 bn Connection of Cable 1 A 1 b 1 A b Connection of Cable B 1 a 1 B a Bn b1 An bn Bn an B84
17 BConnection Jig Guide Plate Hi-Flex Connection Press HIF 6 - GPA Cable Cutter *Pressing Block Hi-Flex Connection Press HHP Pressing Block A Instruction Manual for HIF6 Connection Service Method HIF6 Cable Cutter-FC Pages B85
18 Powered by TCPDF ( HIF6 Series 1.7mm Pitch Two-Piece Connectors HIF6 Series: Connection Type Coupled Connector HIF3B Series (MIL-C-833) Compliant with the MIL standard The VA idea is reflected on both pin header and socket. Products with pull-out tab are available. Countermeasures are taken against noises in combination with the applicable cover case. The type aligned in single-row, low profile type, is available for pin header locking system, in addition to standard products. Number of contacts: 6, 10, 14, 16, 0, 6, 30,,,,, 64 HIF Series (Board direct mount type) 1-row parallel type (HIFE) Number of contacts: 10, 14, 16, 0, 6, 30,,,,.54mm grid alignment facilitates to the design pattern. 4-row staggered type (HIFC) Number of contacts: 10, 14, 16, 0, 6, 30,,,, Mounting height is 4.9mm low profile type. HIF5 Series (Card edge ribbon type) Three types of full hole, semi-hole and no mount area are provided for the unit mount area. Connectors are connected in the bus line system. Cables can be returned within the connector mold width. Number of contacts: 0, 6,,,, FD Series (D sub-ribbon connector) The standard pitch 1.7mm ribbon cable can be insulated and displaced by replacing a jig, in addition to the same pitch 1.38mm as for the D sub connector. The space saving type allows to reduce the thickness on the connection side according to set miniaturization. Connectors can be installed from both front and rear sides of the chassis or panel. Number of contacts: 9, 15, 5, 37 1 B86
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More information1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More information2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
More information1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The
More information1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
More informationHalf-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S
More information0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationSIM Card Sockets. ID1 Series. Features. Applications
SIM Card Sockets ID1 Series Miniature and Thin Photograph (1) Features 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More information0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationInterface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationminisd TM Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationFOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
More information0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
More informationUltra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information1.25mm Pitch Miniature Crimping Connector
1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting
More informationMini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
More information0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More information13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections
13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections FX3B Series Example of Connector Mounted Next to Another Connector FX18 Series (without position misalignment
More informationBoard-to-Wire Connectors
109 0.5mm 0.6mm 1mm 1.25mm 2mm 2.5mm 2.54mm 3.5mm 3.96mm 5mm 7.92mm - IDC (Piercing) Soldering Crimp Crimp/IDC Crimp Crimp/IDC Crimp Discrete Wire Contact Pitch Cable Connection type Type Series Name Page
More information0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationModular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission
More informationHigh Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design 7. 5.75 Features. Compact design occupies minimum space Connectors are designed with small width
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationPC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)
PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection
More informationmicrosd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More information0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More information2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
More information0.6 mm Pitch, Docking Station Connectors
mm Pitch, Docking Station Connectors EX0 Series Features 1. Secure electrical and mechanical connection The signal contacts wipe of 1.5 mm and built-in selfalignment assures reliable connection between
More informationmicrosd Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationMemory Stick Connectors
Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationCMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationEN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationModular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
More information0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationModular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
More information0.2 mm Pitch, 1.2 mm Height, FPC Connector
0.2 mm Pitch,.2 mm Height, FPC Connector FH29 Series Easy mounting with double-sided lead design.2 mm height,.55 mm mounting depth.2mm.55mm Features. Space saving 0.2 mm pitch FPC connector Super thin,
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationmicrosd Card Connectors
microsd Card Connectors DM Series Jan..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features Common to the entire Series. Extremely small in size Small external dimensions and the above-the-board
More informationMicro-Miniature Interface Connectors For Power Supply/Signaling
All non-rohs have been discontinued, or will be discontinued soon. Please check the status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW
More informationPRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationUSB Type-C Connector. Overview. Features. CX Series. 1. Easy mating due to the reversible form factor
USB Type-C Connector CX Series Overview Note: Please contact us for TID acquisition status of each product. The CX series connector conforms to the next-generation USB standard USB Type-C. It is expected
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More information0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors
.5mm and mm Pitch, 2mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator May..27 Copyright 27 HIROSE ELECTRIC CO., LTD.
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationXSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
More informationBoard-to-Board Connectors
91 Board to Board (,, Wrapping) Board Mounting Type Contact Pitch (mm) Stack Height Remarks Series Name Page 0.4 0.5 0.6 0.65 0.8 1 1.27 2 1.5mm 2 to 2.5mm 3 to 5mm 5 to 8mm 2 to 3mm 4 to 5mm 3 to 4mm
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationConstruction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
More informationMolex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
More informationFPC connectors (0.2mm pitch) Back lock
0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationonlinecomponents.com
0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.
More informationConnector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
More informationmicrosd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More informationZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More informationConstruction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.
1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More information