343
|
|
- Frederick Walton
- 5 years ago
- Views:
Transcription
1 .050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature either.050" x " centerlines or.050" x.050" centerlines. These series quickly and easily mass terminate flat cable in one simple step. Our superior contact design provides a smooth, high pressure wiping action to ensure excellent continuity. They are used with a single layer of.025" flat cable. Their small size, light weight and high density make them ideal for compact and limited space applications. Features:.050" x.050" or.050" x " Low Profile and High Density Uses Single layer.025" Flat Cable Quickly and easily mass terminates standard Flat Cable Smooth High Pressure Wiping Contacts Mating Connectors: dam Tech.050" HHR series box headers, latch headers or HPH2 series pin headers Specifications: Material: Insulator: PT, glass reinforced, rated UL94V-0 Insulator Color: lack Contacts: Phosphor ronze Contact Plating: Tin over copper underplate overall Electrical: Operating voltage: 250V C max. Current rating: 1 mp max. Contact resistance: 20 mω max. Initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V C for 1 minute Mechanical: Insertion force: lbs per contact max. Withdrawal force: lbs per contact min. Recommended wire size: 28 wg stranded Cable retention: 22 lbs. min axial force per inch. Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40 C to +105 C Packaging: nti-esd plastic trays Safety gency pprovals: UL Recognized & CS Certified, File no. E ORDERING INFORMTION HFCS 50 SG SERIES INDICTOR HFCS = Low profile.050" x " IDC Socket for single layer.025" Flat Cable HFCS- = Low profile.050" x.050" IDC Socket for single layer.025" Flat Cable HFTR =.050" Transition plug HFDP =.050" Paddleboard Connector for single layer.025" Flat Cable FDH = 4 Row Transition plug PLTING SG = Selective gold plating in contact area, nickel plating in termination area T = Tin plated (HFDP & FDH only) HFCS: 10, 20, 30, 40, 50, 60, 70, 80, 90, 100 HFCS-: 10, 20, 26, 34, 40, 50 HFDP: 30, 50, 68, 72, 80, 100 HFTR: 10, 12, 14, 16, 20, 22, 26, 30, 34, 40, 44, 50 FDH: 10, 14, 16, 20, 26, 34, 40, 50, 60 OPTIONS dd designator(s) to end of part number N = No polarization bump (HFCS series) 343
2 .050" IDC SOCKET DUL ROW Flat Cable SOCKETs HFCS SERIES.050 [1.27] HFCS-.050" x.050" HFCS-.118 [3.00].050 [1.27] HFCS--34-SG.157 [4.00].122 [3.10].197 [5.00] PRT No. & HFCS--10 SG HFCS--20 SG HFCS--26 SG HFCS--34 SG HFCS--40 SG HFCS--50 SG.450 [5.08].450 [11.43].600 [15.24].800 [20.32].950 [24.13] [30.48].413 [10.50] [16.90] [20.70] [25.80] [29.60] [35.90] HFCS.050" x " HFCS-.050 [1.27].236 [6.00] HFCS-40-SG.307 [7.80] PRT No. & HFCS-10 SG HFCS-20 SG HFCS-30 SG Dimensions [5.08] [11.10] [11.43] [17.45] [17.78] [23.80] STRIN RELIEF OPTIONL HFCS-40 SG [24.13] [30.15] USE DIMENSION CHRT FRO OLD CT. HFCS-50 SG [30.48] [36.50] HFCS-60 SG [36.83] [42.85] HFCS-70 SG [43.18] [49.20] HFCS-80 SG [49.53] [55.55] HFCS-90 SG [55.88] [61.90] HFCS-100 SG [62.23] [68.25] 344
3 .050" IDC CONNECTORS FLT CLE PLUGS HFTR, HFDP & FDH SERIES Recommended PC Layout HFTR.050 [1.27].118 [3.00].050 [1.27] HFTR-26-T.126 [3.20].185 [4.70].118 [3.00].200 [5.10] TERMINTED HEIGHT ø.027 [0.70] Part No. in mm in mm HFTR-10 HFTR HFTR HFTR-16 HFTR HFTR HFTR HFTR-30 HFTR HFTR HFTR HFTR [7.70].075 [1.90].075 [1.90] ø.032 [0.81].075 [1.90].075 [1.90] HFDP.050 [1.27].075 [1.90].050 [1.27] Recommended PC Layout.075 [1.90] HFDP-80-T.280 [7.10].275 [7.00].094 [2.40].303 [7.70].280 [7.10] TERMINTED HEIGHT Part No. HFDP-30-T HFDP-50-T HFDP-68-T HFDP-80-T HFDP-100-T in mm in mm [4.00].228 [5.80] FTER SSEMLY.300 [7.62] FDH.050 [1.27] ø.039 [1.00].024 x.012 [0.60 x 0.30].050 [1.27].300 [7.62].394 [10.00] FDH-34-T Recommended PC Layout Part No. in mm in FDH-10-T FDH-14-T FDH-16-T FDH-20-T FDH-26-T FDH-34-T FDH-40-T FDH-50-T FDH-60-T mm
4 Introduction: dam Tech 2FCS Series 2.00mm IDC Sockets are low profile, precision designed flat cable sockets that feature 2.00mm pin to pin and row to row centerlines. These sockets quickly and easily mass terminate flat cable in one simple step. Their versatility allows them to mate with a multitude of 2.00mm pin headers. Our superior selectively gold plated contact design provides a smooth, high pressure wiping action to ensure excellent continuity. They are used with a single layer of 1.00mm flat cable. Their small size, light weight and high density make them ideal for compact and limited space applications. 2.00mm IDC SOCKET & Transition plug.079" [2.00 x 2.00] CENTERLINE 2FCS & 2Ftr SERIES Features: Low Profile and High Density Uses Single layer 1.00mm Flat Cable Quickly and easily mass terminates standard Flat Cable Mating Connectors: dam Tech 2.0mm 2HR series box headers, 2MHR latch headers and 2PH series pin headers Specifications: Material: Insulator: PT, glass reinforced, rated UL94V-0 Insulator Color: lack Contacts: Phosphor ronze Contact Plating: Gold flash (30 µin optional) over nickel underplate on contact area, tin over copper underplate on IDC area Electrical: Operating voltage: 250V C max. Current rating: 1 mp max. Contact resistance: 20 mω max. initial Insulation resistance: 3000 MΩ min. Dielectric withstanding voltage: 500V C for 1 minute Mechanical: Insertion force: lbs per contact max. Withdrawal force: lbs per contact min. Recommended wire size: wg stranded Cable retention: 24 lbs. min axial force per inch. Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40 C to +105 C Packaging: nti-esd plastic trays ORDERING INFORMTION 2FCS 40 SG SERIES INDICTOR 2FCS = 2.00mm Flat Cable IDC Socket 2FTR = 2.00mm Flat Cable Transition Plug PLTING OPTIONS SG = Selectively Gold-Plated 2FCS: 06, 08, 10, 12, 14, 16, 18, 20, 22, 24, 26, 34, 36, 40, 44, 50, 60, 68 2FTR: 08, 10, 12, 14, 16, 20, 22, 24, 26, 30, 34, 40, 44, 50, 68 Safety gency pprovals: UL Recognized & CS Certified, File no. E NOTE: Mating ox Headers for 2FCS series located on page OPTIONS: dd designator(s) to end of part number 30 = 30 µin gold plating in contact area P = Polarizing bump 346
5 2.00mm IDC SOCKET & Transition plug.079" [2.00 x 2.00] CENTERLINE 2FCS & 2Ftr SERIES 2FCS.079 [2.00].165 [4.20] OPTIONL POLRIZING UMP.079 [2.00].118 [3.00].185 [4.70] PRT No. & 2FCS-20-SG.205 [5.20].335 [8.50].130 [3.30].165 [4.20] 2FCS-20-SG 2FCS-22-SG 2FCS-24-SG 2FCS-26-SG 2FCS-34-SG 2FCS-36-SG 2FCS-40-SG 2FCS-44-SG 2FCS-50-SG 2FCS-60-SG 2FCS-68-SG.992 [25.10] [18.00] [27.20] [29.20] [31.00] [39.20] [41.20] [45.10] [49.20] [55.10] [65.20] [73.20] [20.00] [22.00] [24.00] [32.00] [34.00] [38.00] [42.00] [48.00] [58.00] [66.00] 2FTR.157 [4.00].079 [2.00].079 [2.00] 2FTR-20-T.126 [3.20].118 [3.00] PRT No. & 2FTR-08-T.480 [12.20].236 [6.00] 2FTR-10-T.559 [14.20].315 [8.00] 2FTR-12-T.637 [16.20].3937 [10.00].193 [4.90].079 [2.00].079 [2.00] Recommended PC Layout.157 [4.00] 2FTR-14-T 2FTR-16-T 2FTR-20-T 2FTR-22-T 2FTR-24-T 2FTR-26-T 2FTR-34-T 2FTR-40-T 2FTR-44-T 2FTR-50-T 2FTR-68-T.716 [18.20].472 [12.00].795 [20.20].551 [14.00].952 [24.20].629 [16.00] [26.20].708 [18.00] [28.20].866 [22.00] [30.20].945 [24.00] [38.20] [32.00] [44.20] [38.00] [48.20] [42.00] [54.20] [48.00] [72.20] [66.00] 347
6 " IDC SOCKET " x " [2.54 x 2.54] CENTERLINE FCS SERIES Introduction: dam Tech FCS Series " IDC Sockets are extremely popular, low profile, precision designed flat cable sockets that feature " pin to pin and row to row centerlines. These sockets quickly and easily mass terminate flat cable in one simple step. Their versatility allows them to mate with a multitude of.025" sq. post pin headers. Our superior selectively gold plated contact design provides a smooth high pressure wiping action to ensure excellent continuity. They are used with a single layer of.050" flat cable. Their small size, light weight, low cost and high density make them ideal for use in many applications. Features: Choice of Single or Dual beam contact design Low Profile and High Density Uses Single layer.050" standard Flat Cable Quickly and easily mass terminates Flat Cable Smooth High Pressure Wiping Contacts Mating Connectors: dam Tech " HR series box headers and PH2 series pin headers Specifications: Material: Insulator: PT, glass reinforced, rated UL94V-0 Insulator Color: lack Contacts: Phosphor ronze Contact Plating: Gold flash (30 µin optional) over nickel underplate on contact area, tin over copper underplate on IDC area Electrical: Operating voltage: 250V C max. Current rating: 1 mp max. Contact resistance: 30 mω max. initial Insulation resistance: 1000 MΩ min. Dielectric withstanding voltage: 500V C for 1 minute Mechanical: Insertion force: FCS-D2: 0.5 lbs per contact max. Withdrawal force: FCS-D2: lbs per contact min. Recommended wire size: 28 wg stranded Cable retention: 28 lbs. min axial force per inch. Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40 C to +105 C Packaging: nti-esd plastic trays Safety gency pprovals: UL Recognized & CS Certified, File no. E ORDERING INFORMTION FCS SERIES INDICTOR FCS = Flat Cable IDC Socket with standard single wipe contacts FCS-D2 = Flat cable IDC socket with dual wipe contacts 50 SG PLTING SG = Selective gold plating 06, 08, 10, 12, 14, 16, 20, 24, 26, 30, 34, 40,44, 50, 56, 60, 62, 64 Note: Mating box headers for this series STRIN RELIEF: located on page FSR-XX (XX = No. of Positions) Pull Tabs: PT-XX (No. of positions) Keying Plugs: FCS-K (Key plugs can also be molded into connector, consult factory) OPTIONS: dd designator(s) to end of part number 30 = 30 µin gold in contact area GY = Gray color insulator N = No polarization bump 348
7 " IDC SOCKET " x " [2.54 x 2.54] CENTERLINE FCS SERIES FCS Single Wipe Contact.236 [6.00].275 [7.00].140 [3.55] fcs strain relief: FSR-XX (XX = No. of Positions).531 [13.50].236 [6.00] FCS-D2 dual wipe contact.236 [6.00].303 [7.70].140 [3.55] fcs-d2 strain relief: FSR-D2-XX (XX = No. of Positions) FCS-D2 SERIES DUL- WIPE CONTCT DETIL.553 [14.05].236 [6.00] [5.08] [12.19] [7.62] [14.73] [10.16] [17.27] [12.70] [19.81] [15.24] [22.35] [17.78] [24.89] [22.86] [29.97] 1 [27.94] [35.05] [30.48] [37.59] [35.56] [42.67] [40.64] [47.75] [48.26] [55.37] 2 [53.34] [60.45] [60.96] [68.07] [68.58] [75.69] [73.66] [80.77] [76.20] [83.31] 3 [78.74] [85.85] 349
8 " IDC CRD EDGE " CENTERLINE FCE SERIES Introduction: dam Tech FCE Series IDC Card Edge Connectors are designed to quickly and easily mass terminate.050" flat cable and mate directly with the plated fingers of a PC as a card edge connector. Our superior designed crimp cap features guides to reduce occurrence of mis-mating and our specially engineered contacts provide strong wiping action and high retention to the PC. Features: vailable with or without mounting ears Special easy fit cap reduces mis-mating High Retention to PC Selectively Gold plated ifurcated contacts Mating options: Printed circuit boards with a thickness of.058" to.070" Specifications: Material: Insulator: PT, glass reinforced, rated UL94V-0 Insulator Color: lack, (Gray optional) Contacts: Phosphor ronze Contact Plating: Gold flash (30 µin optional) over nickel underplate on contact area, tin over copper underplate on IDC area Electrical: Operating voltage: 250V C max. Current rating: 1 mp max. Contact resistance: 30 mω max. initial Insulation resistance: 1000 MΩ min. Dielectric withstanding voltage: 500V C for 1 minute Mechanical: PC Insertion force: lbs per contact max. Withdrawal force: With.062 thick board lbs per contact min. With.062 thick board Recommended wire size: 28 wg stranded Cable retention: 28 lbs. min axial force per inch. Mating durability: 500 cycles min. Temperature Rating: Operating temperature: -40 C to +105 C ORDERING INFORMTION FCE 34 SG SERIES INDICTOR FCE = Card Edge, IDC POSitions 10, 14, 16, 20, 26, 34,40, 50, 60, 62, 64 PLTING SG = Selective gold plating Packaging: nti-esd plastic trays Safety gency pprovals: UL Recognized & CS Certified, File no. E STRIN RELIEF: FCR - XX (XX= No. of Positions) KEYING PLUGS: FCE-K (Key plugs can also be molded into connector, consult factory) OPTIONS: dd designator(s) to end of part number 30 = 30 µin gold plating in contact area GY = Gray color insulator E = Mounting ears with slotted mounting holes 350
9 " IDC CRD EDGE " CENTERLINE FCE SERIES FCE C.394 [10.00].394 [10.00].677 [17.2] FCE-20-SG.670 [17.00] fter ssembly.630 [16.0] FCE with Mounting Ear Option E.126 [3.20].420 [10.67] D.705 [17.9] FCE-20-SG-E.197 [5.00].050 [1.27] [10.16].600 [15.24].700 [17.78].900 [22.86] [22.86] [40.64] [48.26] [60.96] [73.66] [76.20] 3 [78.74].604 [15.34].804 [20.42].904 [22.96] [28.04] [35.66] [45.82] [53.44] [66.14] [78.84] [81.38] [83.92] C.872 [22.15] [27.23] [29.77] [34.85] [42.47] [52.63] [60.25] [72.95] [85.65] [88.19] [90.73] D [33.02] [38.10] [40.64] [45.72] 2 [53.34] [63.50] [71.12] [83.82] [96.52] N / [101.60] E [38.10] [43.18] [45.72] [50.80] [58.42] [68.58] [76.20] [88.90] [101.60] N / [106.68] 351
10 " IDC ox Header " x " [2.54 x 2.54] CENTERLINE FCP SERIES Introduction: dam Tech FCP Series IDC ox Headers are designed to quickly and easily mass terminate to.050" flat cable. The IDC termination is converted to a Shrouded ox Header output with a polarizing slot that mates with standard IDC sockets. This connector is ideal for splicing and making T taps to a cable bus. dam Tech s sturdy design features solid, selectively gold plated.025"sq. copper alloy posts. Features: IDC Flat Cable to Shrouded ox Header Mates with standard IDC sockets Ideal for splicing and T taps to cable bus Solid selectively gold plated contacts Mating Connectors: Mates with dam Tech FCS Series " [2.54mm] dual row IDC sockets Specifications: Material: Insulator: PT, rated UL94V-0 Insulator Color: Gray Contacts: rass Contact Plating: Gold flash (30 µin optional) over nickel underplate on contact area, tin over copper underplate on IDC area Electrical: Operating voltage: 250V C max. Current rating: 1 mp max Contact resistance: 30 mω max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V C for 1 minute Mechanical: Insertion force: 0.5 lbs per circuit max. Withdrawal force: lbs per circuit min Mating durability: 500 cycles min. Recommended cable size: 28 wg stranded Temperature Rating: Operating temperature: -40 C to +105 C ORDERING INFORMTION FCP SERIES INDICTOR FCP = IDC ox Header 34 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 SG PLTING SG = Selective gold plating Packaging: nti-esd plastic trays Safety gency pprovals: UL Recognized & CS Certified, File no. E OPTIONS: dd designator(s) to end of part number E = Mounting Ears 30 = 30 µin gold plating in contact area K = lack color insulator 352
11 " IDC ox Header " x " [2.54 x 2.54] CENTERLINE FCP SERIES FCP Header.025 [.640] SQ.335 [8.50] FCP-34-SG C.620 [15.75] FCP Header 6 with mounting ear option.025 [.640] SQ.118 [3.00].335 [8.50] FCP-34-SG-E.280 [7.11] C.242 [6.15].620 [15.75] POS [10.16] [15.24] [17.78].708 [18.00].908 [23.08] [25.62] C.905 [23.00] [28.08] [30.62].281 [7.15] [22.86] 1 [27.94] [30.48] [30.70] [35.78] [38.32] [35.70] [40.78] [43.32] [35.56] [43.40] [48.40] [40.64] [48.48] [53.48] [48.26] [56.10] [61.10] [60.96] [68.80] [73.80] [73.66] [81.50] [86.50] 64 3 [78.74] [86.58] [91.58] 353
12 " IDC Latch HEDER " x " [2.54 x 2.54] MHF SERIES Introduction: dam Tech MHF Series IDC Latch Headers are designed to quickly and easily mass terminate to.050" flat cable. The IDC termination is converted to a Shrouded ox Header with ejector/latches and a polarizing slot that mates with standard IDC sockets. This connector is ideal for splicing and making T taps to a cable bus. dam Tech s sturdy design features solid, selectively gold plated.025"sq. copper alloy posts. Features: Latches for secure attachment Latch ejection feature makes socket removal easy IDC Cable to Shrouded ox Header Mates with standard IDC sockets Ideal for splicing and T taps to cable bus Solid selectively gold plated contacts Mating Connectors: Mates with dam Tech FCS Series " (2.54mm) dual row IDC sockets Specifications: Material: Insulator: PT, rated UL94V-0 Insulator Color: Gray Contacts: rass Contact Plating: Gold flash (30 µin optional) over nickel on contact area, Tin over copper underplate on IDC area Electrical: Operating voltage: 250V C max. Current rating: 1 mp max Contact resistance: 20 mω max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V C for 1 minute Mechanical: Insertion force: 0.5 lbs per circuit max. Withdrawal force: lbs per circuit min Mating durability: 500 Cycles min. Recommended cable size: 28 wg stranded Temperature Rating: Operating temperature: -40 C to +105 C ORDERING INFORMTION MHF 34 SG L SERIES INDICTOR MHF = IDC Latch Header 10, 14, 16, 20, 24, 26, 30, 34, 40, 50, 60, 64 EJECTOR/LTCHES S = Short ejector/ latches for sockets without strain relief L = Long ejector/ latches for sockets with strain relief PLTING SG = Selective gold plating Packaging: nti-esd plastic trays Safety gency pprovals: UL Recognized & CS Certified, File no. E OPTIONS: dd designator(s) to end of part number E = Mounting ears 354
13 " IDC Latch HEDER " x " [2.54 x 2.54] MHF SERIES MHF Header.327 [8.30] C MHF-34-SG-L X [30.10].756 [19.20] [30.10] Short Latch (No Strain Relief Type) X=.236 [6.00] Long Latch (Strain Relief Type) X=.315 [8.00] MHF Header with Mounting Ear Option.118 [3.00].327 [8.30].197 [5.00] C PRT NO. & C MHF [32.17].860 [21.85].400 [10.16] X [30.10] MHF [37.25] [26.93].600 [15.24] MHF [39.79] [29.47].700 [17.78] MHF [44.87] [34.55].900 [22.86] MHF [49.95] [39.63] 1 [27.94] MHF [52.49] [42.17] [30.48] MHF [57.57] MHF [62.65] MHF [70.27] MHF [82.97] [47.25] [52.33] [59.95] [72.65] [35.56] [40.64] [48.26] [60.96].299 [7.60] MHF [95.67] [85.34] MHF [100.75] [90.43] [73.66] 3 [78.74] 355
14 Introduction: dam Tech s MTD Series " &.156" Housings with IDC contacts are designed to quickly and easily mass terminate discrete wires or pre-notched flat cable. Our stamped contacts are designed to feature a precision, gas tight IDC connection at the wire end and a high pressure, smooth wiping action connection on the mating connector end. oth are available with optional cover in feed through or closed end styles. Features: Easily mass terminates discrete wire and pre-notched flat cable Housings have pre-inserted IDC contacts High performance Gas tight IDC connection Optional Feed through or Closed end cover Specifications: Material: Insulator: Nylon 66, rated UL94V-2 Insulator Color: Natural Contacts: Phosphor bronze and rass Contact Plating: Tin over copper underplate overall Electrical: Operation voltage: 250V C max. Current rating: " centers: 4. mp max..156" centers: 6 mp max. Insulation resistance: 1000 MΩ min. Dielectric withstanding voltage: 1000V C for 1 minute Mechanical: Mating force: " &.156" Center: 1.3 lbs max Unmating force: " Center: 0.5 lbs min.156" Center: 1.3 lbs min " Centers: Wire size: 28 wg to 22 wg.156" Centers: Wire size: 26 wg to 18 wg Temperature Rating: Operating temperature: -40 C to +105 C Packaging: nti-esd plastic bags pprovals and Certifications: UL Recognized & CS Certified, File no. E mass connect housing Housing with idc contacts " &.156" centerline MTD SERIES ORDERING INFORMTION CONNECTOR MTD 07 1 centerlines = " =.156" SERIES INDICTOR MTD = IDC Mass Termination Housing ORDERING INFORMTION COVER mtd-c Positions 02 Thru 28 SERIES INDICTOR MTD-C = Cover for " MTD- IDC Mass Termination Housing MTD-C = Cover for.156" MTD- IDC Mass Termination Housing Wire WG. = 18 WG. = 20 WG. C = 22 WG. D = 24 WG. E = 26 WG. F = 28 WG. 10 Positions 02 Thru 24 type 1 = Feed through 2 = Closed end 356
15 mass connect housing Housing with idc contacts " &.156" centerline MTD- " Centerline.272 [6.90].272 [6.90] MTD--04-D-1 MTD--07-D [14.50].571 [14.50] Optional Cover MTD-C-XX.299 [7.60].169 [4.30] = X No of Positions = X No of Spaces vailable wire sizes: 22, 24, 26 & 28 WG..252 [6.40] MTD-.156" Centerline.156 [3.96].331 [8.40].331 [8.40] MTD [19.60].772 [19.60] Optional Cover MTD-C-XX.370 [9.40] =.156 [3.96] X No of Positions =.156 [3.96] X No of Spaces.220 [5.80].311 [7.90] vailable wire sizes: 18, 20, 22, & 24 WG
16 IDC DIP & TRNSITION PLUGs " CENTERLINE FTR & FDP SERIES Introduction: dam Tech s Flat Cable DIP & Transition plugs are a one piece connector system that quickly and easily mass terminates flat cable then mounts directly to the PC or PC socket. These connectors are ideal for interconnecting PC s in a permanent flat cable transition or satisfying disconnect applications. Our low profile design allows an increased board to board stacking density. Features: vailable in 8 64 positions Eliminates need for two piece header & Socket set Fast easy mass termination without stripping cable Heavy duty Tin plated contacts Low Profile, high density board to board stacking Plugs into IC Socket or solders directly to PC Specifications: Material: Insulator: PT, glass reinforeced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: lack (Gray optional) Contacts: rass Contact Plating: G = Gold over nickel underplate on contact area, Tin over copper underplate on IDC area. T = Tin over copper underplate overall Electrical: Operating voltage: 250V C max. Current rating: 3 mp max Contact resistance: 20 mω max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V C for 1 minute Mechanical: Recommended cable size: 28 wg stranded Temperature Rating: Operating temperature: -40 C to +105 C Packaging: nti-esd plastic trays Safety gency pprovals: UL Recognized & CS Certified, File no. E ORDERING INFORMTION FTR 40 T SERIES INDICTOR FTR = IDC Flat Cable Transition Plug " x " FDP-3 = IDC Flat Cable Dip Plug " x.300" FDP-6 = IDC Flat Cable Dip Plug " x.600" PLTING T = Tin plated G = Gold plating on tails FTR: 08, 10, 14, 16, 20, 24, 26, 28, 30, 34, 40, 50, 60, 64 FDP-3:.300" row spacing Positions: 08, 10, 14, 16, 18, 20, 24, 26, 28, 34, 40 FDP-6:.600" row spacing Positions: 24, 26, 28, 32, 34, 36, 40 OPTIONS: dd designator(s) to end of part number 30 = 30 µin gold plating in contact area GY = Gray color insulator RT = oard retention 358
17 IDC DIP & TRNSITION PLUGs " CENTERLINE FTR & FDP SERIES FTR Series " x " (8P-64P).236 [6.00] = x No. of Positions per row [7.88] = x No. of Spaces per row FTR-14-T.201 [5.10].283 [7.20].291 [7.40] FTER CRIMPING.130 [3.30].023 X.012 [0.60 X 0.30] ø.040 [1.02] Recommended PC Layout FDP Series " x.300" (8P-20P).418 [10.61] FDP-14-T.228 [5.80].236 [6.00] FTER CRIMPING.137 [3.50].022 X.012 [0.55 X 0.30].300 [7.62].300 [7.62] ø.040 [1.02] Recommended PC Layout FDP Series " x.600" (24P-40P).718 [18.24] FDP-24-T.228 [5.80].137 [3.50].236 [6.00] FTER CRIMPING.600 [15.24] ø.040 [1.02].022 X.012 [0.55 X 0.30].600 [15.24] Recommended PC Layout 359
.050" IDC Connectors for.025" Ribbon Cable - M73 Series
.050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationTX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More information2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationIntroduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationStandard Products Assembly Equipment Table 3M Electronic Products Division
Plug Connectors 3M plug connectors can be used with either flat cable or discrete wire and are the ideal interface for standard sockets. They can be used as a T-tap from a cable bus, a splice connector
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationAMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationDynamic Series Connectors
D-5000 Series Series profile The Dynamic 5000 series was developed for up to 5 amperes in response to the demand for improved reliability and productivity for the main power lines in equipment. They can
More informationThe con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationSYSTEM CJ TELEPHONE JACKS & MODULAR PLUGS
SYSTEM TELEPHONE JKS & MODULR PLUGS vilux Introduction System contains splice termination regular modular plugs, category 5 modular plugs and board mount and surface mount telephone jacks. The modular
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationD-3100S Standard 1-Row Type
(Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Used for both signal circuit and power/power supply circuit applications. Able to carry 15A max. of current per position
More informationMilli-Grid 2.00mm (0.79 ) Pitch. Interconnect System for Complete Design Flexibility
Milli-Grid for Complete Design Flexibility Milli-Grid 50394, 87396 Crimp Terminal 5110, 78045 Receptacle Crimp Housing 87568 IDT Receptacle 87569 IDT Strain Relief 87831, 78246 Through-Hole 87832 SMT 87833,
More informationHIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
More information3M Pak 100 Wiremount Plug Series
Pak 100 Wiremount Plug Shrouded to protect against physical and chemical pin damage Open or closed end covers available Optional ejector latches Accepts flat cable or discrete wire Military (with 3518
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationM20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
More informationEXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
More informationCOMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
More informationElcon CROWN EDGE Card Edge-style High Current Connectors
Elcon CROWN EDGE Card Edge-style High Current Connectors CROWN EDGE is a board-to-board power interconnect solution that uses Elcon high performance Crown contact technology configured to mate directly
More informationCatalog Revised Ribbon Cable Interconnect Solutions. Ribbon Cable Interconnect Solutions
Catalog 82012 Revised 10-09 Ribbon Cable Interconnect Solutions onents.com Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide Ribbon Cable Connector Selection Guide Mates to.050"
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More informationDDR4 DIMM Sockets, Halogen-free
Meeting JEDEC specifications, these high-speed sockets offer greater PCB real-estate and cost savings with excellent assembly processing compatibility Meeting JEDEC specifications, Molex s Vertical SMT
More informationMinitek Product Presentation
Minitek Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals 2 Value Proposition
More informationMolex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
More informationHD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine
Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page 1 of 15 CONTENTS CLAUSE PAGE 1.0 SCOPE..
More informationELCO Memory Card Components
ELCO Memory Card Components Table of Contents ELCO PCMCIA PC Memory Card Components Host Device Components Introduction... 3 Features & Benefits... 4 PC Memory Card Components Selection Guide...5 Host
More informationCLINCHER FLEX CONNECTORS OVERVIEW TARGET MARKETS / APPLICATIONS FEATURES & BENEFITS
FLEX CONNECTORS CLINCHER Connector System for Flexible Circuitry (0.100in./ 2.54mm pitch) Maximum reliability; Low applied cost OVERVIEW The CLINCHER connector family includes single-row pin and receptacle
More informationAmphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
More informationCRIMPFLEX connectors for flexible circuits
CRIMPFLEX connectors for flexible circuits CRIMPFLEX CONNECTORS Technical data...3 CRIMPFLEX CRIMPING Description...4 MALE SOLDER TABS Solder tabs environment...5 Standard short male solder tab...6 Standard
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
More informationCMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
More informationUniversal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors x [1.7 x 1.7] x [1.7 x.54] AMPMODU mm Connectors x [.54 x.54].15 x.15 [3.18 x 3.18].156 [3.96] 1 3 4 5 6 7 Disclaimer While Tyco Electronics
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
More informationXC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationSM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
More informationZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More informationMinitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationZH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.0") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Ultracompact, low profile design The ZH connector requires only about % of the installation space required by
More informationORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
More information2.54mm (.100") Pitch Connectors
mm (.100") Pitch Connectors HRWIN plc Fitzherbert Road, Farlington, Portsmouth, Hampshire, PO6 1RT, UK Tel: (Sales) +44 (0) 23 9237 0451 Tel: (dmin) +44 (0) 23 9231 4545 Fax: +44 (0) 23 9231 4590 Sales,
More informationSunridge FPD Series Interconnect & Cabling System for Notebook LCD Panel Display
Sunridge FPD Series Interconnect & Cabling System for Notebook LCD Panel Display Sunridge Corporation U.S.A. Headquarters: 2500 E. Foothill Blvd. #107, Pasadena, CA 91107 Tel: (626) 535-1780 Fax: (626)
More information3M 4-Wall, Tripolarized Header.050".100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series
Tripolarized for robust alignment when mating to 820 series socket 50 mil 100 mil halves the connector length vs. traditional 100 mil x 100 mil products Latching Ejector for rugged high performance applications
More informationHigh Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z Interconnection Systems) Catalog Revised 8-04
High Speed, Controlled Impedance Two-Piece Connectors (MICTOR, Micro-Strip and STEP-Z s) Catalog 6594 Revised 8-04 High Speed Stacking Connectors (Parallel and Right-ngle Board-to-Board) Stacking Height
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
More informationEdgecard Design Information. Polyester thermoplastic glass reinforced, UL rated 94 V-O
Edgecard Design Information SPECIFICATIONS DAUGHTER CARD LAYOUT Installation Tooling - See end of product section pre-assembled Edgecard connectors, with C-Press contacts, combine the reliability of a
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationCW INDUSTRIES IDC SELECTION GUIDE
CW INDUSTRIES IDC SELECTION GUIDE An ISO Company that Delivers World Class Quality About CW IDC Connectors CW mass terminated Insulation Displacement Connectors are specifically designed to provide a reliable
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More informationDubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More informationFLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
More informationMinitek Pwr 4.2 HCC Product Presentation
Product Presentation Basics Portfolio Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Markets & Applications Marcomm Collaterals Product Presentation 2
More informationXH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
More information