Automation station, compact series
|
|
- Alvin Ferguson
- 5 years ago
- Views:
Transcription
1 s p0 Desigo Integral Migration Automation station, compact series PXC-NRUF In existing Integral plants, you can replace compact automation units NRUE/A, NRUF/A and NRUT/A with the PXC NRUF automation station. Same housing. Same periphery interface (plug compatible). Existing periphery can be assumed without a change. Use existing panel wiring. Compact, freely programmable automation station for HVAC and building services plants. Native BACnet automation station with communications BACnet via LonTalk BACnet PTP (point-to-point) Modem. PPC processor allows for high performance and reliable operation Comprehensive management and system functions (alarm management, schedulers, trends, remote management, access protection, etc.) physical inputs / outputs Stand-alone application or for use with linked system or devices. Supports the following operating elements: Room units QAX... Local / networkable operator units System or WEB operation via system network. CMN970en_ Building Technologies
2 Functions Automation stations provide the infrastructure for recording and processing system and application-specification functions and are freely programmable. Comfortable management functions are integrated in addition to control functions, e.g.: Alarm management with alarm routing via the entire network. Standard, basis and expanded alarm management with checked secure transmission and automated transmission monitoring. Scheduler programs. Trend functions. Remote management function. Secured access to the entire network using individually defined user profiles and categories. Programming language The automation stations can be freely programmed (relying closely on CEN standard ) in D-MAP programming language. All function blocks, provided in libraries were graphically interconnected to plant operating programs. Communication The LONWORKS bus using internally standardized BACnet protocol is used for communications. Both peer-to-peer communication to other automation stations as well as connection to operating units PXM... are supported. Type summary Device Type Data point mix DI DO Automation station for physical data points PXC-NRUF Accessories Connecting cable between operating unit PXM0 or PXM0 and the automation station. Adapter for firmware download. Type designation PXA-C PXA-C /
3 Equipment combinations Operation Various options exist to operating automation stations PXC-NRUF: Room device QAX... on the PPS interface. Up to a maximum of five room devices QAX... (without QAX...) can be connected. Details on PPS communication are described in the Desigo Technical principles manual (Section "I/O blocks", subsection "PPS addressing"). Local operator unit PXM0 *), is connected with cable PXA-C. Operator unit PXM0 *), is connecting with cable PXA-C, for local operation or for decentralized operation of an entire plant connected within a BACnet / LonTalk network. Note *) Only one operator unit can be connected (PXM0 or PXM 0). Web operation The following web controllers support remote monitoring and operation using a standard Internet browser: PXC...-E.D with PXA0-W or PXA0-W. Technical design Inputs Universal inputs (... )can be used for active sensor elements as well as potential-free contracts for signaling functions. Digital inputs (DI ) allow non-potential-free reporting functions. They are electrically isolated from the system and from one another. Digital inputs (DI 9 ) allow reporting functions (potential-free). Digital inputs (DI 7 ) allow reporting and counting functions (potential-free). Outputs Universal outputs ( ) can, on the one hand, control modulating actuators, on the other hand, they can be programmed for binary switching functions via the program structure. Relay outputs (DO ) are designed for switching functions up to a maximum of AC/DC V, A. /
4 Power supply The device requires an external power supply AC/DCV /- 0%. It must comply with SELV / PELV requirements! The internal DC-DC converter supplies the internal processor system and inputs/outputs with controller voltage. DCV /00mA is also provided for active sensors (Integral periphery). This converter also establishes electrical isolation to the AC/DCV power supply. The device reset concept ensures defined conditions for field devices connected to the I/Os during power-up, power-down and undervoltage. Overvoltage protection and startup protection protect the automation station against fluctuating power. Design The compact construction allows you to install the automation station in narrow spaces and is particularly well suited for compact panels or for plants using integrated panels. Metal housing. Front cover, can be opened. LED displays. Plug-in terminal blocks. Terminal blocks Terminal block can be plugged in to ease field device connection. Existing Integral periphery can be plugged in at the same place as before. Note Older Integral systems, where the terminal blocks do not fit: Use the terminal blocks delivered with the PXC-NRUF. /
5 LED displays RUN STATUS SERVICE TX LOW BATT INFO 97z0 LED Color Activity Function RUN reen Continuously off Continuously on No supply present. Supply present (LED controlled by SW). STATUS Red Continuously off Continuously on Flashes quickly Normal condition Hardware error recognized during self test or automation station in a state of "coma". There is no valid firmware present. SERVICE Red Continuously off Flashing Flashes in wink command rhythm * Continuously on LONWORKS node is configured. LONWORKS node is not configured. Physical identification of the automation upon receipt of the wink command. Neuron chip faulty or service button is pushed in. TX Yellow Flashing Data traffic on LONWORKS bus. LOW BATT Red Continuously off Continuously on Batteries OK (LED controlled by SW). Replace one or both batteries. INFO Red Freely programmable. * Wink command rhythm: s Hz Hz 000 s s s s Service button Identification of the automation station on the LONWORKS network: refer to "commissioning". Disposal The device is classified as waste electronic equipment in terms of the European Directive 0/9/EU (WEEE) and should not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered to. Regarding disposal, use the systems setup for collecting electronic waste. Observe all local and applicable laws. Mounting notes The device can be attached directly to any surface with four screws, e.g. on the panel's base plate. Plug-in screw terminal blocks are provided to connect field devices, power and bus wiring. The other interfaces are connected using the quick plug-in connections. Do not open the device. All service functions are accessible via the lid. /
6 Commissioning The front cover may only be opened by instructed service staff! Comply with country-specific safety regulations and corresponding safety provisions to prevent personal injury or damage to property. Download plant operating programs The tool Desigo Xworks plus is used to download the plant operating program via the network (BACnet/LonTalk). Set parameters and configurations Use Desigo Xworks plus to set control parameters and configuration data. You can also edit data visible in the network using the PXM0 operator unit. Wiring tests Field devices and wiring can be tested with the operating unit PXM0 as soon as power is connected. There for loading the plant operating programs is not needed. Network connections Desigo Xworks plus configures network addresses. For unique identification in the network (BACnet/LonTalk), press the service button or send a wink command to the corresponding automation station (service LED flashes). 970z0 Lithium battery AA Alkaline battery Force firmware download button Service button Reset button Firmware download The current D-MAP program is deleted from FLASH when the Firmware Download button is pressed during restart (reset). The automation station waits a moment for the signal to activate the FWLoaders and then starts the automation station. Restart Press the reset button to force a restart. /
7 Maintenance notes Battery effective life Database information is stored in SDRAM memory, that is supported by a battery (alkaline type AA). This avoids costly reloads of programs and databases following a longer power outage (up to ca. month). The unused effective life for alkaline batteries is at least four years. The remaining life under load is just a few days following a "battery low" event. The real time clock is supported by a lithium battery with an effective life of at least 0 years. The LOW BATT LED is lit for insufficient load of one of the two batteries and the automation station automatically sends a system event and a device alarm. Replace battery Open the blue lid to replace the batteries. You can take out the batteries for as long as you want, when the unit is powered. STOP Caution! To prevent damage to the hardware from electrostatic discharge (ESD), use a grounded wristband to change batteries. Firmware upgrades Firmware and operating system are stored in non-volatile manner (on Flash ROM). It is easy to update the Flash ROM memory for the plant when new firmware versions become available. 7 /
8 Technical data eneral device data Operating voltage AC/DC V ± 0 % (SELV / PELV) Frequency 0 / 0/0 Hz. Power consumption max. VA. Internal fuse thermal, automated reset. Functional data Processor Motorola PPC (MPC ). Storage location FLASH MB. RAM MB. Data backup during power outage Applications / Parameters (FLASH) > 0 years. Runtime data (buffered by AA alkaline, can be replaced on the plant) Unused: years. Typically month in case of supply failure (grid or AC V) Realtime clock 0 years. (buffered by Lithium battery, can be replaced on the plant). Precision category 0.. Sampling cycle max. second. Universal inputs Can be configured in software... A/D resolution (analog in) bit. Measured value inputs Area V. Input resistance 00 kω against. Sensor inputs Temperature sensor L-Ni 000, NI 000, Pt 000, T Measuring range C Sensor electricity (pulsed) approx.. ma (peak). Resolution 0. K. Meas. error at C (Ni 000, Pt 000) max. 0. K (excluding wire sensor). Measuring error at C (T) max..0 K (excluding wire sensor). Signal input Contact voltage DC 0... V. Contact electricity (pulsed) 7 ma (peak). Contact resistance Max. 00 Ω (closed). Insulation resistance Min. 0 kω (open). Digital inputs DI... Electrically isolated From system and from one another Not potential free. Area. Low < AC/DC V. High = AC/DC.. V ± 0%. Interior resistance. Ri = kω. Digital inputs DI 9... Contact voltage. DC 0... V. Contact current (continuous). 7 ma. Contact resistance. Max. 00 Ω (closed). Insulation resistance. Min. 0 kω (open). /
9 Digital inputs DI 7... with counting function As DI 9... ; additionally counting function: Counter frequency (symmetrical) Min. closing/opening time incl. bouncing Max. bounce time Counter memory Max. Hz. 0 ms 0 ms Bit (0... max. cycle time 0 s at Hz) Counter inputs must be shielded, if they count faster than Hz and are routed with analog inputs in the same trunking for more than 0 m. Universal outputs Can be configured in software... D/A resolution (analog out) 0 bit. Modulating Output voltage range V. Output current Max.. ma source, max.. ma reduction. Digital Output voltage 0 / 0V Output current. ma Relay outputs Number of switching outputs (changeover contact) DO... External fuse protection for incoming cable Slow blow fusible link Max. 0 A Circuit breaker Max. A Circuit breaker tripping characteristic Type B, C or D to EN 09 Contact data AC/DC switching voltage max. AC V / DC V min. AC / DC V AC current rating Max. A resistive, A inductive Min. ma at AC V Min. 0 ma at AC V Current on make (AC) Max. 0 A ( s) DC current rating Max. A resistive at DC V Min. 0 ma resistive at DC V Response / dropout time 7 ms / ms typical Service life of contact for AC V (guide values) With 0. A resistive x 0 7 switching operations With 0. A resistive x 0 switching operations With.0 A resistive (N/O) x 0 switching operations Reduction factor with inductive load 0. (cos phi = 0.) Insulation resistance: Basic insulation AC 00 V, to EN 070- between relay outputs and system electronics Interface room units. Interface type PPS. Feed category Baud rate PPS. kbps. Interface LONWORKS bus. LONWORKS FTT transceiver (screw terminal). Network TP/FT-0. Baud rate 7 kbps. Protocol BACnet. Local communication (HMI, RJ). PXM0 (RS-). PXM0 (BACnet/LonTalk) One operator unit PXM0 or PXM 0 can be connected per automation station. LONWORKS bus instead of the RS bus used in Integral plants. 9 /
10 Plug-in screw terminals Power supply and signals Solid or stranded wire 0... mm or x. mm. LonWorks bus Solid or stranded wire x.0 mm. Simply cable lengths, Universal inputs Max. 00m with A = mm. and cable types Digital inputs DI Max. 00 m with diameter 0. mm. Universal outputs Max. 00m with A =. mm. Relay outputs DO Depends on load and local regulations. Interface room units PPS Max. m with A =.0 mm. Cable type -core, twisted pairs, unshielded. Capacity max. nf/km. Interface cable LONWORKS bus See installation guide PX, CA09. Cable type CAT. Connecting cable PXM0 Max. m. Classification to EN 070 Automatic action Pollution degree Protection class Housing protection. Protection as per EN 09 IP 0. Type III (Device also suitable for use in protection class II equipment) Ambient conditions Operation Class K as per IEC 07. Temperature C. Humidity..9 % r.h. (no condensation) Transportation Class K per IEC 07. Temperature C. Humidity 9 % r.h. (no condensation) Standards, directives and approvals. Product standard EN 070- Automatic electrical controls for household and similar use Electromagnetic compatibility (Applications) For use in residential, commerce, light-industrial and industrial environments EU conformity (CE) CMT970xx *) RCM-conformity (EMC) CMT9en_C *) EAC conformity Eurasia conformity CME970 *) data on RoHS compliance, materials composition, packaging, environmental benefit, disposal) Environmental compatibility Product environmental declaration (contains Dimensions Refer to dimensions Weight Excl. packaging packaged..90 kg.0 kg *) The documents can be downloaded from 0 /
11 Connection diagrams Digital outputs Universal outputs Operator unit C. C. C. C. C. C. C.7 C. C. C. C. C. C. C. C.7 C. 7 9 DO DO DO DO 7 DO DO DO7 DO HMI A B C D E F H I J K L M N O P 7 I 7 J 7 K 7 L 7 M 7 N 7 O 7 P MODEM / COM DI7 C. DI C. DI9 C. DI0 C. 79 DI C. DI C. DI C.7 DI C. DO9 C.9 DO0 C.0 DO C. DO C. 9 DO C. DO C. DO C. DO C. 99 INTERAL Terminal DESIO Digital outputs Digital inputs (Potential free) Universal inputs Digital inputs (Potential free) C.9 DI9 C.0 DI0 C. DI C. DI 9 C. DI C. DI C. DI C. DI C.9 9 C.0 0 C. C. 7 C. C. C. C. I J K L M N O P DESIO Terminal INTERAL ( ) ND A B C D E F H I J K L M N O P CL A CL B V V ND 9 7 DI DI DI DI DI DI DI7 DI CP CP 9 7 PPS Supply LONWORKS C. C. C. C. C. C. C.7 C. C. C. C. C. C. C. C.7 C. 970A0 Digital inputs (not potential free) Universal inputs 7 DESIO Terminal INTERAL INTERAL Terminal DESIO STOP Caution! Observe the technical data for the relay outputs. Local installation regulations must be observed. /
12 Pin occupancy "HMI" socket (LONWORKS) 7 9Z0 Pin description.. LONWORKS Data A (CLA).. LONWORKS Data B (CLB).. ND.. Plus V. Pin description.. Unoccupied.. Connected to. 7. COM / TxD.. COM / RxD. Interface Modem / COM Pin Abbr. Description DCD data carrier detect RXD received data TXD transmit data DTR data terminal ready ND signal ground DSR data set ready 7 RTS request to send CTS clear to send 9 NC not connected /
13 Connect field devices STOP Note! This is a device using the -wire principle. System ground (0) and measuring ground ( or ND) are electrically isolated. For active field devices using -wire technology, this connection is in the field device. For active field devices using -wire technology, the connection must be established separately: Either at the terminal on the field device. Or in existing plants, using only wires: at the automation station between one of the terminals ( ) and 0. A) Field device supply of system transformer Compulsory specification for transformer Type Safety isolating transformer AC 0 V/AC V to EN Fusing AC V Max. 0A slow-blow (Extra-low voltage fuse) Max. A circuit breaker Counter inputs Counter inputs must be shielded, if they count faster than Hz and are laid with more than 0 meters using analog inputs in the same cable duct. Passive sensor (e.g. QAM..., Ni 000) AC V 0 Active sensor (e.g. QFM..., humidity) 00 0 V 970A0 ND CP CP- PXC NRUF M B M QFM... (r.h.) B M QAM... (Ni000) Magnetic valves (e.g. MP... ZM or MX...). AC V V ND CP CP- PXC NRUF N 970A0 MP... ZM MX... 0 (N) (L) YM Y /
14 Motor valves AC V V ND CP CP- PXC NRUF 970A0 0 Y Damper actuators (e.g. BB.E). AC V V ND CP CP- PXC NRUF 970A0 BB.E B) Field device supply of separate transformers Magnetic valves (e.g. MP... ZM or MX...). AC V V ND CP CP- L N AC 0 V STOP Note! PXC NRUF AC V 0 970A07 0 (N) (L) YM Y Do NOT ground separate transformer MP... ZM MX... /
15 C) Connect room units N Automation Station. AC V 0 R... Max. room units (parallel) PPS PPS Twisted pair bus cable. Interchangeable polarity Wire length, refer to "Technical data". V ND PXC NRUF CP CP- N C C CP CP C C CP CP R C C CP CP 970A0 R R Notes Room units are connected in parallel (maximal ). Must be addressed using a jumper to distinguish (address plug on the circuit board). The address factory set to. /
16 Dimensions All dimensions in mm m0 9 Published by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters ubelstrasse 0 Zug Switzerland Tel Siemens Switzerland Ltd 00 Delivery and technical specifications subject to change /
Automation station, compact series
s 9 70 970p0 DESIO INTERAL Migration Automation station, compact series PXC-NRUF In existing INTERAL plants, you can replace compact automation units NRUE/A, NRUF/A and NRUT/A with the PXC NRUF automation
More informationAutomation stations compact model
9 PXC36-S DESIO PX Automation stations compact model PXC5 PXC36-S PXC5 Freely programmable compact automation stations for HVAC and building services systems The fixed data point mix ensures optimum efficiency
More informationAutomation stations, compact model
s 9 215 9215P01_01 Desigo PX Automation stations, compact model PXC...D PXC12.D PXC22.D PXC22.1.D PXC36.1.D PXC12-E.D PXC22-E.D PXC22.1-E.D PXC36.1-E.D Freely programmable compact automation stations for
More informationPXR11 PXR12. System controllers DESIGO PX
9 235 DESIGO PX System controllers PXR11 PXR12 For integration of the room controllers in the DESIGO RXC range into the DESIGO building automation and control system (operates as an interface) For the
More informationAutomation stations, compact model
s 9 215 9215P01_01 Desigo PX Automation stations, compact model PXC...D PXC12.D PXC22.D PXC22.1.D PXC36.1.D PXC12-E.D PXC22-E.D PXC22.1-E.D PXC36.1-E.D Freely programmable compact automation stations for
More informationRoom unit with PPS2 interface
1 642 Desigo RX Room unit with PPS2 interface for use with: QAX33.1 devices of the ranges Desigo RXC, RXB, RXL, and RXA (PPS2) Desigo PX Automation stations 1) devices with a PPS2 interface Room temperature
More informationRoom unit with PPS2 interface
s 1 640 1640P01 Desigo RX Room unit with PPS2 interface For use with: QAX34.3 Equipment from the RXC, RXB, RXL and RXA (PPS2) ranges Desigo PX automation stations 1) Devices with a PPS2 interface Measurement
More informationAutomation stations modular series
s 9 222 9222P01 DESIGO PX Automation stations modular series PXC...D PXC...-E.D PXA40- Freely programmable modular automation stations for HVAC and building services plants. Native BACnet automation station
More informationDigital input modules
8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a
More informationBACnet/IP Web Interface
Desigo Control Point BACnet/IP Web Interface PXG3.W100-1, PXG3.W200-1 Web-based, graphical operation of BACnet automation stations using Desigo touch panels and devices with an HTML 5.0 web browser. Simultaneous
More informationRXL24.1. Room controller RXL. Communicating controller for chilled ceiling and radiator applications CC-02
s 3 878 RXL Room controller RXL24.1 Communicating controller for chilled ceiling and radiator applications CC-02 The RXL24.1 room controller is used for temperature control in individual rooms. For chilled
More information9283P01. Extension module. Integration of existing PT-I/O modules in Desigo Used with PXC50...D, PXC100...D or PXC200...D
s 9 283 9283P01 Desigo PX Extension module Integration of existing PT-I/O modules in Desigo Used with PXC50...D, PXC100...D or PXX-PBUS The PXX-PBUS extension module allows for integrating existing PT-I/O
More informationBACnet router for BACnet/IP BACnet/LonTalk BACnet MS/TP
s 9 270 Desigo PX BACnet router for BACnet/IP BACnet/LonTalk BACnet MS/TP PXG3.L PXG3.M Routing between BACnet/IP, BACnet/LonTalk (PXG3.L only), and BACnet MS/TP Supports BACnet/IPv4 and BACnet/IPv6 ANSI/ASHRAE
More informationAutomation stations modular series
s 9 222 9222P01 Desigo PX Automation stations modular series PXC...D PXC...-E.D PXA40- Freely programmable modular automation stations for HVAC and building services plants. Communications BACnet/IP BACnet/LonTalk
More informationRXM39.1. PL-Link IO Block. Desigo TRA. Use with PXC3 series room automation station
s 3 836 3836P01 Desigo TRA PL-Link IO Block Use with PXC3 series room automation station RXM39.1 The PL-Link IO Block contains the inputs and outputs controlled by a room automation station via PL-Link.
More informationExtension module for Web functions generic
s 9 264 9263p01 DESIGO PX Extension module for Web functions generic Plugs into the modular automation stations, type PXC...-U PXA30-W1 Extension module for PXC -U automation stations in the DESIGO building
More informationRXC39.5. Room controller. Building Technologies. Desigo RXC. Communicating room controller for fan-coil applications
s 3 856 Desigo RXC Room controller RXC39.5 Communicating room controller for fan-coil applications The RXC39.5 room controller is used for temperature control in individual rooms. For fan-coil systems
More informationExtension module for graphic Web functions for one automation station
s 9 266 9263p01 DESIGO PX Extension module for graphic Web functions for one automation station Plugs into the modular automation stations, type PXC...-U For operation of the PXC -U automation stations
More informationRXB39.1. Room controller RXB. Communicating room controller for fan-coil applications FC-13
s 3 875 RXB Room controller Communicating room controller for fan-coil applications FC-13 RXB39.1 The RXB39.1 room controller is used for temperature control in individual rooms. For 2-pipe or 4-pipe fan-coil
More informationQAX50.1 QAX50.5 QAX51.1 QAX51.5. Flexible room unit. Desigo RXC
1 648 Desigo RXC Flexible room unit for integrated operation of HVAC, lighting and blinds in individual rooms; with LONMARK -compatible bus communication QAX50.1 QAX50.5 QAX51.1 QAX51.5 Room temperature
More informationSuper universal modules
s 8 174 TX-I/O Super universal modules TXM1.8X TXM1.8X-ML Two fully compatible versions: TXM1.8X: 8 inputs/outputs with LED signal / fault indication TXM1.8X-ML: As TXM1.8X, but with additional local override
More informationTXM1.8RB. TX-I/O Blinds module
s 8 178 8178p01 TX-I/O Blinds module TXM1.8RB 8 non-floating relay outputs for... 4 blinds motors with 2 end switches, or 2 blinds motors with 3 end switches, or 2 blinds motors with 2 end switches + 1
More informationDESIGO RX Individual room controllers. for fan-coil systems, chilled ceilings and radiators, with LONMARK-compatible bus communications
3 834 DESIO RX Individual room controllers for fan-coil systems, chilled ceilings and radiators, with MARK-compatible bus communications RXC20.1 RXC21.1 The RXC20.1 and RXC21.1 controllers are used for
More informationRXL24.1. Room controller RXL. Communicating controller for chilled ceiling and radiator applications CC-02
s 3 878 RXL Room controller RXL24.1 Communicating controller for chilled ceiling and radiator applications CC-02 The RXL24.1 room controller is used for temperature control in individual rooms. For chilled
More informationWeb interface BACnet/IP
s 9 294 DESIGO PX Web interface BACnet/IP PXG3.W100 Local or remote operation of one or multiple PX automation station(s) via Desigo Touch Panels (TP) and standard web browser Connection via Ethernet Central
More informationTXM1.8U TXM1.8U-ML. Universal modules TX-I/O
s 8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
More informationRotary version, three-position control
4 622 Residential Air damper actuators GXD..31.1 Rotary version, three-position control Electric motor-driven actuators for three-position control 1.5 Nm nominal torque AC 24 V or AC 230 V rated voltage
More informationExtension module for BACnet over Ethernet / IP and graphic Web functions
s 9 265 9263p01 DESIGO PX Extension module for BACnet over Ethernet / IP and graphic Web functions Plugs into the modular automation stations, type PXC...-U PXA30-W2 For operation of the PXC -U automation
More informationTXM1.8U TXM1.8U-ML. Universal modules TX-I/O
8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
More informationRXL21.1 RXL22.1. Room controllers RXL. Communicating controllers for fan-coil applications FC-10, FC-11, FC12
3 877 3877P0 RXL Room controllers Communicating controllers for fan-coil applications FC-0, FC-, FC2 RXL2. RXL22. The RXL2. and RXL22. room controllers are used for temperature control in individual rooms.
More informationResistance measuring module
s 8 176 8176P01 TX-I/O Resistance measuring module TXM1.8P 8 inputs with LED signal / fault display. 8 resistance measuring inputs with individual configuration of resistance or temperature measurement.
More informationPower supply module, bus connection module
s 8 183 8183p01, p02 TX-I/O Power supply module, bus connection module TXS1.12F10 TXS1.EF10 Each I/O row begins with one of these devices TXS1.12F10 power supply module Up to 4 power supply modules can
More informationTXM1.8U TXM1.8U-ML. Universal modules TX-I/O
s 8 173 TX-I/O niversal modules TXM1.8 TXM1.8-ML Two fully compatible versions: TXM1.8: 8 inputs/outputs with LED signal / fault indication TXM1.8-ML: As TXM1.8, but with additional local override facility
More informationIsland bus expansion module
s 8 184 8184P01 TX-I/O Island bus expansion TXA1.IBE Expand island bus to a distance of up to 2 x 200 meters Compact design per DIN 43 880, requires little space Easy installation and setup Mounted on
More informationExtension module for lighting control
s 3 842 DESIGO RXC Extension module for lighting control Extension to the RXC30 / RXC31 / RXC38 room controller RXC40.1 RXC40.5 The RXC40 extension module is used in conjunction with an RXC30, RXC31 or
More informationTXM1.8T. Triac module Used for Thermic and motor-driven actuators (AC 24 V) TX-I/O
s 8 179 8179p01 TX-I/O Triac module sed for Thermic and motor-driven actuators (AC 24 V) AC 24 V-controlled devices TXM1.8T 8 triac outputs (AC 24 V), configured individually for: Permanent contact Three-point
More informationAir damper actuators
4 604 OpenAir Air damper actuators Rotary version, AC/DC 24 V and AC 230 V GQD...1 GQD 1 Electric motor-driven actuators for two-position and three-position control as well as DC 0 10 V control 2 Nm nominal
More informationM-bus web server. Meters and Energy Cost Allocation WTV676-HB6035
Meters and Energy Cost Allocation M-bus web server WTV676-HB6035 The web server reads out wireless or wired M-bus devices over Ethernet or the Internet using a browser. Power and connection for up to 20
More informationRXB10.1. Room controller. Siemens Building Technologies Building Automation DESIGO RXB. for chilled ceilings and radiators with EIB bus communication
3 870 DESIO RXB Room controller for chilled ceilings and radiators with EIB bus communication RXB10.1 The RXB10.1 controller is used for temperature control in individual rooms: For chilled ceilings and
More informationExtension module Integration of existing PTM I/O modules in Desigo Used with PXC50...D, PXC100...D or PXC200...D
s 9 283 9283P01 Desigo PX Extension module Integration of existing PTM I/O modules in Desigo Used with PXC50...D, PXC100...D or PXX-PBUS The PXX-PBUS extension module allows for integrating existing PTM
More informationOCI Service tool. As of ACS790 V9.00. Service case with software and service interface
5 655 Service tool Service case with software and service interface As of ACS790 V9.00 OCI700.1 The service tool consists of one service case with the ACS790 software included on a CD ROM as well as the
More informationClimatix TM Climatix Controller. For controlling, switching and monitoring functions
s A6V10759734 Climatix TM Climatix Controller POL422.50/ATL For controlling, switching and monitoring functions Main features Note The Climatix 422.50/ATL controller is HVAC controller optimized for air
More informationSAX.. ACVATIX Electromotive actuators for valves. with a 20 mm stroke
s 4 501 ACVATIX Electromotive actuators for valves SAX.. with a 20 mm stroke SAX31.. Operating voltage AC 230 V, 3-position control signal SAX61.. Operating voltage AC/DC 24 V, control signal DC 0 10 V,
More informationRoom unit with PPS2 interface
1 641 DESIGO RX Room unit with PPS2 interface for use with: QAX321 devices of the ranges DESIGO RXC, RXB, and RXA (PPS2) DESIGO PX Automation stations 1) devices with a PPS2 interface Room temperature
More informationUniversal Modules. Synco 700. Extension modules for use with controls of the Synco 700 family. Use
s 3 146 Synco 700 Universal Modules RMZ78 Extension modules for use with controls of the Synco 700 family. Use For heating, ventilation, air conditioning and chilled water plant equipped with controls
More informationMXPLC. Compact PLC process station. Summary. Application HVAC control systems, data acquisition, interfacing 3 rd party systems.
MXPLC Compact PLC process station Summary The MXPLC is a programmable process station with integrated I/O module with the I/O mix optimized for larger HVAC control applications. The multi-interface process
More informationRMZ782B RMZ783B. Extension Modules. Building Technologies HVAC Products. Synco 700. for heating controller RMH760B
3 136 Synco 700 Extension odules for heating controller RH760B RZ782B RZ783B Extension modules for use with the RH760B heating controller to provide additional auxiliary functions Use Heating plants controlled
More informationLON Module for Variable Speed Drive
5 193. LON Module for Variable Speed Drive SED2 Conforms to and is certified to the LONMARK Interoperability Guidelines enabling information sharing with other LONMARK products. LONMARK-compliant with
More informationPXM20-E. Operator unit BACnet auf Ethernet/IP DESIGO PX
9 234 DESIGO PX Operator unit BACnet auf Ethernet/IP PXM20-E Network-compatible operator unit for viewing and operating one or more DESIGO PX automation stations. High-grade display with adjustable contrast
More informationCLIMATIX STEQ, STCM DATASHEET FOR CONTROLLING, SWITCHING AND MONITORING FUNCTIONS. POWER SUPPLY RELAY OUTPUTS. Power supply. 4.
CLIMATIX STEQ, STCM DATASHEET FOR CONTROLLING, SWITCHING AND MONITORING FUNCTIONS. 4. Relays Power supply 2. Relays 8. Universal Inputs/ Process Bus (KNX) RS485 (Modbus) Tool (USB) Ethernet Tool (USB)/
More informationUSB-KNX Interface OCI702. USB-KNX interface with cables and service bag
USB-KNX Interface OCI702 USB-KNX interface with cables and service bag The USB-KNX interface OCI702 serves to provide a USB-KNX connection to access tools from a Microsoft Windows PC to a KNX network or
More informationFast running actuators for air dampers
4 608 OpenAir TM Fast running actuators for air dampers Fast runner rotary version, GAP19 Electronic actuator for 2-position, 3-position, or modulating control, nominal torque 6 Nm, at 2 s running time,
More informationNon-communicating room controllers
3 881 DESIO RXA on-communicating room controllers For fan-coil systems RXA20.1 RXA21.1 RXA22.1 The RXA20.1, RXA21.1 and RXA22.1 room controllers are used for temperature control in individual rooms. For
More informationRoom automation station
s 9 203 9203mmP01 Desigo TRA Room automation station PXC3.E7... Modular, programmable room automation stations for HVAC, lighting, and shading. BACnet / IP communications; BACnet profile ASC (BTL label).
More informationNon-communicating room controllers
3 882 DESIGO RXA Non-communicating room controllers RXA29.1 For fan-coil systems The RXA29.1 room controller are used for temperature control in individual rooms. For 2-pipe or 4-pipe fan-coil systems,
More informationRotary actuators for ball valves
s 4 655 Rotary actuators for ball valves for ball valves VA..60.. / VB..60.., AC 24 V / DC 24 V / AC 230 V GSD..41.9A Electromotoric rotary actuators without spring return For On-Off control (2 wire SPDT)
More informationEY-EM : Remote I/O module, ecolink
EY-EM 510...512: Remote I/O module, ecolink510...512 How energy efficiency is improved Optimum adjustment to applications by means of module technology. Reduction in wiring Features Part of the SAUTER
More informationRoom Temperature Controller
3 023 Room Temperature Controller for four-pipe fan coil units RCC30 Outputs for on / off valve actuators Outputs for three-speed fan Control depending on room or return air temperature Operating modes:
More informationRMZ792. Bus Operator Unit. Building Technologies HVAC Products. Synco 700
3 113 Synco 700 Bus Operator Unit RMZ792 Communicating operator unit for operating up to 150 controllers, room units and central units from the Synco 700 range via Konnex bus. Favorite pages can be freely
More informationRoom automation stations
s 9 203 9203mmP01 Desigo TRA Room automation stations PXC3.E... Modular, programmable room automation stations for HVAC, lighting, and shading. BACnet / IP communications; BACnet profile ASC (BTL label).
More informationHandheld Tool for VAV compact and modular controllers
s OpenAir VAV Handheld Tool AST20 Handheld Tool for VAV compact and modular controllers For configuration and maintenance of OpenAir VAV compact and modular controllers: For use in OEM factory for configuration
More informationRoom controller. For chilled ceiling and radiator applications CC-02 with Konnex bus communications (S-mode and LTE mode)
s 3 874 RXB Room controller For chilled ceiling and radiator applications CC-02 with Konnex bus communications (S-mode and TE mode) RXB24.1 The RXB24.1 room controller is used for temperature control in
More informationPOL635.XX/XXX POL636.XX/XXX POL638.XX/XXX POL638.70/XXX
s 3 230 Climatix TM Climatix Controllers For controlling, switching and monitoring functions POL635.XX/XXX POL636.XX/XXX POL638.XX/XXX POL638.70/XXX The controllers are products of the Climatix range.
More informationVAV modular controller
s 3 545 OpenAir VAV modular controller Series E ASV181.1E/3 Modular controller for plants with variable or constant air volume flow Integrated high-accuracy differential pressure sensor and configurable
More informationNMID. Remote control. SAPIM I/O number. SAPIM I/O number NBRN (RS485) ZM100. Relay, 24 VDC - + UO07 UI11 UI10 UI09 UI08 UI07 UI06 UI05 UI04 UI03 UI02
1/8 NRK16/A, NRK16-B/A, (NRK16-T /A, NRK14-T /A, NRK16-WEB/A) Control and interlock devices with pre-programmed system-specific application modules The controllers may be used as stand-alone control and
More informationInterface converter for VAV compact controllers
s 5 852 OpenAir (Optional) Interface converter for VAV compact controllers AST11 The interface converter is used to convert the PPS2 into an RS-232 or USB interface signal. It is suited for use with the
More informationAutomation stations modular series
s 9 222 9222P01 DESIGO PX Automation stations modular series PXC...D PXC...-E.D PXA40- Freely programmable modular automation stations for HVAC and building services plants. Native BACnet automation station
More informationAirflow Pressure Sensor
Desigo TRA Airflow Pressure Sensor DXA.S04P1... Airflow Pressure Sensor (APS) is used to measure airflow for room pressurization and fume hood control applications. Differential Pressure (velocity) is
More informationIMIO100 IMIO105. DDC controllers. Summary
IMIO100 IMIO105 DDC controllers Summary DDC (Direct digital control) controller IMIO100 and IMIO105 are free programmable process stations with ARM Cortex M4 processor and OS FreeRTOS. They contain one
More informationmark150s mark150/485s DDC controllers Summary
mark150s mark150/485s DDC controllers Summary DDC (Direct digital control) controller mark150s and mark150/485s are free programmable process stations with ARM Cortex M4 processor and OS FreeRTOS. They
More informationRMZ782B RMZ783B. Extension Modules. Building Technologies HVAC Products. Synco 700. for heating controller RMH760B
3 136 Synco 700 Extension odules for heating controller RH760B RZ782B RZ783B Extension modules for use with the RH760B heating controller to provide additional auxiliary functions Use Heating plants controlled
More informationAir Damper Actuators Modbus RTU
s OpenAir Air Damper Actuators Modbus RTU GMA.., GCA.. Spring return types Air Damper actuators 7 Nm / 18 Nm (spring return) with Modbus communication GMA.. 7 Nm nominal torque GCA.. 18 Nm nominal torque
More informationClimatix programmable controller
Climatix C400 Climatix programmable controller POL461.45/STD, POL467.75/STD, POL468.65/STD Climatix programmable controller C400 (POL461.45/STD, POL468.65/STD and POL467.75/STD) is HVAC controller optimized
More informationQXA2000 QXA2001. Condensation Monitor QXA2001 QXA2000 AQX2000
1 542 1542P03 1542P01 1542P02 QXA2001 QXA2000 AQX2000 Condensation Monitor QXA2000 QXA2001 The QXA2000 condensation monitor is used to avoid damage due to condensation on chilled ceilings and in HVAC plant.
More informationVAV compact controller
s 3 544 OpenAir VAV compact controller Series E GDB181.1E/3 GLB181.1E/3 Compact controllers for plants with variable or constant airflow Integrated high-accuracy differential pressure sensor, actuator,
More informationUniversal Controller
3 342 Universal Controller For comfort control in HVAC & R-Systems Standalone electronic universal controller with P or PI response Operating voltage in accordance to type AC 24 V Control application selectable
More informationAir Damper Actuators Modbus RTU
s OpenAir Air Damper Actuators Modbus RTU GEB.., GIB.. Non-spring return types Damper actuators 15 Nm / 35 Nm (non-spring return) with Modbus communication GEB.. 15 Nm nominal torque GIB.. 35 Nm nominal
More informationAEW Pulse Adapter. Building Technologies
5 383 Pulse Adapter AEW310.2 The AEW310.2 pulse adapter acquires and handles the pulses from 1 or 2 consumption meters with pulse output and transmits the data to an M-Bus-network. For setting the parameters,
More informationProduct and functional description
Product and functional description The RS 525/23 Universal Dimmer is a KNX device with one dimmer output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The bus
More informationElectrical data Nominal voltage AC/DC 24 V Nominal voltage frequency
echnical data sheet LR24A-MOD Communicative rotary actuator for ball valves orque motor 5 Nm Nominal voltage AC/DC 24 V Control modulating,, hybrid mode Conversion of sensor signals Communication via BACnet
More informations Climatix AHU ext. module 14 I/O POL955.XX/XXX Climatix
s 3 262 Climatix Climatix AHU ext. module 14 I/O POL955.XX/XXX POL955.XX/XXX is a versatile Climatix extension module that can be connected to any type of Climatix POL6xx controller. Its high level of
More informationSemi flush-mounted room temperature controllers with LCD
s 3 077 RDD310 RDE410 Semi flush-mounted room temperature controllers with LCD For heating systems RDD310 RDE410 RDD310 and RDE410 features: Operating voltage AC 230 V 2-position control with On / Off
More informationTouch Panels 10.1" and 15.6"
Desigo Control Point Touch Panels 10.1" and 15.6" PXM40.E, PXM50.E, PXM40-1, PXM50-1, PXA.V40, PXA.V50 High-quality touch panels for technical on-site operation of plants as well as room operation. Optimized
More informationMXIO. Compact I/O module. Summary. Application Compact I/O module for data acquisition and HVAC control systems. Function
MXIO Compact I/O module Summary The MXIO multiple I/O compact module is a microprocessor-controlled, communicative module with the I/O mix optimized for larger HVAC control applications. The module uses
More informationDuct Sensors. Building Technologies HVAC Products. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 QFM4160 AQF4150 Symaro Duct Sensors for relative humidity and temperature with calibration certificates QFM41 Operating voltage AC 24 V / DC 1353 Signal output DC 010 V / 420 ma for
More informationCompact actuating room automation stations, BACnet/IP, AC24 V (Actuating DXR)
Desigo Room Automation Compact actuating room automation stations, BACnet/IP, AC24 V (Actuating DXR) DXR2.E10PL-102B, DXR2.E10PLX-102B Combination room automation station and actuator for buildings with
More informationSwitching module for AC V and up to three load stages, with manual switching
8 149 PTM13-M3 DESIGO I/O modules Switching module for AC 24 250 V and up to three load stages, with manual switching PTM13-M3 Signal converter for connection to P-bus, with three interlocked on/off control
More informationCompact room automation stations, BACnet/IP, AC 230 V
Desigo Room Automation Compact room automation stations, BACnet/IP, AC 230 V DXR2.E09.., DXR2.E09T.., DXR2.E10.. For building with increased demands placed on functionality and flexibility in Room Automation
More informationSIMOCODE 3UF Motor Management and Control Devices
Technical specifications General data applicable to the basic units, current measuring modules, current/voltage measuring modules, expansion modules, decoupling module and operator panel Permissible ambient
More informationTemperature controller Ducted systems
2 725 Temperature controller Ducted systems Standard model without zoning functions RRV851 Multifunctional controller used for central control of ducted HVAC systems in combination with a QAX850 master
More information24-hour room temperature controller
s 2 201 24-hour room temperature controller Heating applications REV13.. Use Mains-independent, battery-operated room temperature controller featuring user-friendly operation, easy-to-read display and
More informationRotary actuator for ball valves KNX / PL-Link
s ACVATIX Rotary actuator for ball valves KNX / PL-Link G..B111.9E/KN Rotary actuator 5 / 10 Nm with KNX communication for 6-port control ball valves and ball valves GDB111.9E/KN with 5 Nm nominal torque
More informationProduct and functional description
Product and functional description The RS 520/23 shutter / blind actuator is a KNX device with one relay output. The device is installed in an AP 118 Control Module Box or an AP 641 Room Control Box. The
More informationLM24A-MOD. Cable 1 m, 6 x 0.75 mm 2 RJ12 socket
echnical data sheet Damper actuator for Modbus for adjusting air dampers in ventilation and air conditioning systems in buildings orque 5 Nm Nominal voltage AC/DC 4V Communication via Modbus RU (RS-485)
More informationM-Bus Central Unit. Use
6 M-Bus Central Unit OZW The M-bus central unit is used for the remote readout, remote operation and supervision of an M-bus plant with a maximum of consumption meters and controllers featuring an M-bus
More informationManual Industry Interfaces
Manual Industry Interfaces W&T Release. Type 0, 0 0, 00 0, 0 0, 0 Industry Interfaces 0/0 by Wiesemann & Theis GmbH Subject to errors and changes: Since we can make mistakes, none of our statements should
More informationNetwork node WTT56.. A6V _en--_c Building Technologies
s Network node WTT56.. The WTT56.. network node is used to receive and handle the data transmitted by heat cost allocators, heat and water meters incorporated in a radio network. Storage of up to 500 metering
More informationProduct and Applications Description. Note. Example of Operation. Installation Instructions. Application Programs WARNING
Product and Applications Description Note If the application program is not loaded completely by the ETS, you had better interrupt the 24 V voltage supply of the I/O-module during the loading interval.
More informationCompact Series Unitary Equipment Controller
Technical Specification Sheet Document No. 149-837 February 20, 2018 Compact Series Unitary Equipment Controller Figure 1. PXC Compact Series Unitary Equipment Controllers (PXC UEC-16/24). The PXC Compact
More informationRoom Automation Station, BACnet/IP, AC 24 V
Desigo Room Automation Room Automation Station, BACnet/IP, AC 24 V DXR2.E17C... For buildings with room pressurization and fume hood control applications, leveraging the functionality and flexibility of
More information