Type. Overstroke travel. Short push travel. Type Heigh Packing

Transcription

1 6 mm Square Thin Type SMD Light Touch Switches 6mm Square Middle Travel SMD Light Touch Switch Type: EVQP0 EVPF Features External dimensions : 6.5 mm mm, Height 1.8 mm (Excluding the push plate) External dimensions : mm mm, Height 2.5 mm (Excluding the push plate, Middle Travel) With or without ground terminal, height, operating force Overstroke travel Middlestroke travel type Recommended pplications Operating switches for other electronic equipment Operation switches for PC mouse Car audio systems Game Explanation of Part Numbers 6 mm Square Thin Type SMD Light Touch Switches Product Code 4th & 5th P0 Q2 Type Overstroke travel Short push travel Height Push Plate Color 6mm Square Middle Travel SMD Light Touch Switch (10) (11) (12) Product Code Type Heigh Packing Specifi cations Travel Type Short Push Travel Overstroke Travel Middlestroke Travel Type Snap action/push-on type SPST Rating 10 μ 2 Vdc to 20 m 15 Vdc (Resistive load) Contact Resistance 100 mω max. 500 mω max. Electrical Insulation Resistance 100 MΩ min. (at 100 Vdc) Dielectric With stand ing Voltage 250 Vac for 1 minute ouncing 10 ms max. (ON, OFF) Mechanical Operating Force 0.5 N, 1.0 N, 1.3 N, 1.6 N, 2.6 N, 3.5 N 0.6 N, 1.0 N 2.0 N Travel 0.25 mm (0.2 mm : 0.5N, 1.0N) 0.3 mm 0.25 mm 0.5 N : cycles min. Endurance Operating Life 1.0 N, 1.3 N, 1.6 N : cycles min. 0.6 N : cycles min. 2.6 N : cycles min. 1.0 N : cycles min cycles min. 3.5 N : cycles min. Operating Temperature 40 C to +85 C Storage Temperature 40 C to +85 C (ulk) 20 C to +60 C (Taping) H=2.0 mm 4000 pcs. Embossed Taping (Reel Pack) Minimum Quantity/Packing Unit H=2.5 mm, 3.1 mm 2000 pcs. Embossed Taping (Reel Pack) H=3.5mm 3000 pcs. Embossed Taping (Reel Pack) Quantity/Carton H=2.0 mm pcs. H=2.5 mm, 3.1 mm pcs pcs. Note: Non washable

2 Dimensions in mm (not to scale) No. 1 EVQP0 Overstroke travel : 0.3 mm 6.5 f3 ' ' f2 () min. ' ' (3.2) (3.6) (3.2) PW land pattern for reference Part Numbers Operating Force Height Push Plate Color Ground Terminal Operating Life EVQP0N 0.6 N 2.5 mm lue Without cycles EVQP0P 0.6 N 2.5 mm lue With cycles EVQP0QQ 1.0 N 2.5 mm Gray Without cycles EVQP0SQ 1.0 N 2.5 mm Gray With cycles

3 Dimensions in mm (not to scale) No. 2 Short travel 0.25 mm 6.5 f3.8 ' Height H 2.0± ± ±0.2 ' f3 1.8 H () 1 min. ' ' (3.2) (3.6) (3.2) PW land pattern for reference Part Numbers Operating Force H=Height Push Plate Color Ground Terminal Operating Life 01W 0.5 N 2.0 mm White Without cycles W 0.5 N 2.5 mm White Without cycles 03W 0.5 N 3.1 mm White Without cycles D01W 0.5 N 2.0 mm White With cycles DW 0.5 N 2.5 mm White With cycles D03W 0.5 N 3.1 mm White With cycles F01W 1.0 N 2.0 mm White Without cycles FW 1.0 N 2.5 mm White Without cycles F03W 1.0 N 3.1 mm White Without cycles H01W 1.0 N 2.0 mm White With cycles HW 1.0 N 2.5 mm White With cycles H03W 1.0 N 3.1 mm White With cycles K01W 1.3 N 2.0 mm White Without cycles KW 1.3 N 2.5 mm White Without cycles K03W 1.3 N 3.1 mm White Without cycles M01W 1.3 N 2.0 mm White With cycles MW 1.3 N 2.5 mm White With cycles M03W 1.3 N 3.1 mm White With cycles P01W 1.6 N 2.0 mm White Without cycles PW 1.6 N 2.5 mm White Without cycles P03W 1.6 N 3.1 mm White Without cycles S01W 1.6 N 2.0 mm White With cycles SW 1.6 N 2.5 mm White With cycles S03W 1.6 N 3.1 mm White With cycles U01W 2.6 N 2.0 mm White Without cycles UW 2.6 N 2.5 mm White Without cycles U03W 2.6 N 3.1 mm White Without cycles W01W 2.6 N 2.0 mm White With cycles WW 2.6 N 2.5 mm White With cycles W03W 2.6 N 3.1 mm White With cycles Y01W 3.5 N 2.0 mm White Without cycles YW 3.5 N 2.5 mm White Without cycles Y03W 3.5 N 3.1 mm White Without cycles 201W 3.5 N 2.0 mm White With cycles 2W 3.5 N 2.5 mm White With cycles 203W 3.5 N 3.1 mm White With cycles

4 No. 3 EVPF Middlestroke Travel 0.25 mm () (4.4) (5.1) () ' ' (3.6) f3.4 Knob f3.7 () (2.8) ' ' () (2.8) No sordering PW land pattern for reference : Recommended land pattern area. : No soldering area. ny land pattern or via holes shall not be provided at area. If it's necessary to design land pattern or via holes at area, please apply resist to them to protect their metal part completely. If their metal parts are not protected completely,short circuit failure may occur by solder ball. eside, there should be convexoconcave by designing additional pattern, it may cause swith tilt, influence on solder-ability or flux intrusion after reflow soldering. Therefore, please study any influence of additional land pattern or via holes at area in advance. Part Numbers Operating Force Height Push Plate Color Ground Terminal Operating Life EVPFC N 3.5 mm Gray Without cycles

5 Recommended Refl ow Soldering Conditions Embossed Carrier Tap ing Operation Top ( C) MX Fan or Normal Temp. Tape width=12.0 mm t 1 Feeding hole fd 0 Chip pocket P 2 P 0 E F W (Normal Temp.) t 2 Chip component P 1 Tape running direction 90±30 40±10 Soldering Time (s) Unit: mm Part No. Height W F E P1 P2 P0 D0 Dia t1 t ± / ± ± ± ± ± ± ± ±0.1 ± ±0.05 EVQP ±0.2 EVPF ±0.1 Standard Reel Dimensions in mm (not to scale) T E C Item C D E Rate (mm) ± ± ± ± ±0.5 r D Item W T t r Rate (mm) 13.5± ±1.0 W t Recommended Shape of Test Pole Recommended Operating Conditions 2 mm Type 2.5 mm, 3.1 mm, 3.5 mm Type +0 f f mm max. Test pole Leaning angle range 90 ±4 (vertical direction) Switch R0.1 mm±0.05 mm R0.1 mm±0.05 mm Mounting surface