Z1 axis pot. (Rocker pot.) side operation. SW1 (ON when pushed)

Transcription

1 Single, Dual, Triple or Quad Axis Position Hold or Spring Return Multiple Pushbutton Options Center and/or Directional Micro-Switches Center and/or Positional Detents 5 Mio. Operations Mechanical Life Z1 axis pot. (Rocker pot.) SW4 (Illumination, Alternate type) + side operation SW1 SW5 (Illuminating, Alternate type) side operation SW2 SW6 + side operation Z2 axis pot. (Rocker pot.) side operation JB90C Model Shown SW7 Trigger Switch Multi-function handle is mated to our rugged JA90 or JB90 base. The handle can be configured for one or two additional axis (Z1 and/or Z2 rocker type potentiometers) and up to six pushbutttons. Note: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of +15 C ~ +35 C. Specifications are subject to change without notice.

2 Dimensions (mm) *22º ~ 26º *22º ~ 26º SW4 (Illumination, Alternate type) 60 SW5 (Illumination, Alternate type) + side operation Z1 pot. (rocker pot.) + side operation side operation Z2 potentiometer (rocker pot.) side oparation Sub-panel (Black) 22 Rubber boot Abt. 90 Abt.163 Abt.212 SW3 Option: SW7 Trigger Switch axis pot. Abt ± hole X axis pot. 2 SW1 SW2 50 Leadwires for Z axis Pot. and each switch Abt. 300mm long (Equivalent to AWG27) Handle Operating Patterns I X O *Q X X X Single axis Dual axis Dual axis Dual axis Operates on X or axis only. Omni-directional circular pattern. Operating angle is 22º ~ 26º Omni-directional square pattern. Operating angle becomes ±15º ~ ±20º from center.

3 Potentiometer Electrical Data Electrical Travel X and Axis: about 44º (±22º from center) Electrical Travel Z Axis: about 30º (±15º from center, rocker action) Resistance Value 10kΩ ±15% Independent Linearity Tolerance ±3% Resolution Infinite Output Smoothness < 0.2% against applied voltage Contact Resistance Variation < 5% C.R.V. Update Dielectric rate Strength 500VAC, 1 minute Insulation Resistance > 1000MΩ at 500VDC Rated Power X, Axis: 0.2W Z Axis: 0.1W Potentiometer X, Axis: 5 mio. operations Z Axis: 2 mio. operations Mechanical Data Mechanical Travel X, Axis: ±22º ~ ±26º from center Mechanical Travel Z Axis: 30º ±5º (±15º from center, rocker action) Operating Force X,, Axes: 2 ~ 12N (200 ~ 1200gf) Z Axis: Approx. 24mN m ~ 30mN m Operating Temperature -20ºC ~ +65ºC Vibration 10 ~ 55Hz 98m/s 2 Shock 30G > 5,000,000 random operations Protection Grade IP40 Weight approx. 900g ~ 1200g depending on configuration SW1, SW2, SW3 and SW6 Specifications Operating characteristics Momentary type Rating 50VDC, 0.1A Dielectric Strength 1 minute at 1000 VAC Insulation Resistance > 1000MΩ at 500VDC approx. 500,000 operations SW1 (Orange) SW2 SW3 SW6 (Gray) (Orange) (Gray) 1. Leadwire colors identified in parentheses. 3. Leadwire length is 300mm Note 1: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of +15 C ~ +35 C. Specifications are subject to change without notice.

4 SW7 Trigger Switch Specifications (Option in lieu of SW3) Operating characteristics Rating Dielectric Strength Insulation Resistance Momentary type 30VDC, 100mA 1 minute at 600 VAC > 1000MΩ at 500VDC approx. 100,000 operations SW7 1. Leadwire colors identified in parentheses. 3. Leadwire length is 300mm SW4 and SW5 Switch Specifications Operating characteristics Rating Ilimunating LED Rating Dielectric Strength Alternate type (push On, push OFF) Optional: Momentary 30VDC, 5A 1.85VDC, 20mA > 200MΩ at 500 VDC approx. 10,000 operations (Green) SW4 L LED L (Green) (ellow) SW5 L LED L (ellow) 1. Leadwire colors identified in parentheses. 3. Leadwire length is 300mm Note 1: Customers should test and verify device performance in any given application. General specifications values are measured at temperatures of +15 C ~ +35 C. Specifications are subject to change without notice.

5 Axis Driven Micro-Switches - JA90C Types Only Activation Cams Center Detect Switch (JA90 & JB90) Switch Type Electrical Rating Activation SPDT (N.O. C N.C.) 125VAC / 5A min. 200,000 operations center ±5º from center Micro-switches Directional Switches (JA90 Only) Switch Type Electrical Rating SPDT (N.O. C N.C.) 125VAC / 5A min. 200,000 operations Activation ±5º from center * center * Customer can specify activation angle of switches Detent Mechanism(S) - JA90C Types Only Detents provide operator with a distinct tactile feedback of a specific position. In case of configurations without spring return to center (position hold with increased operating friction), tactile sense of center position is missing. A center detent can be utilized to provide the operator with this positive feel. In joystick configurations with or without spring return to center, detents can be spaced along the X and/or axis to provide a specific feedback of a specified position. In case of spring return to center types, detent force can be adjusted to either maintain a specified position without operator or allow handle to return to center. Please consult us for specific applications. cam spring loaded bearing Potentiometer Wiring Details X and Axis Potentiometers Z1 and Z2 Rocker Potentiometers 4 (center tap option) (ellow) 4 (center tap option) 3 (Green) 2 For X-axis: + direction For -axis: + direction Potentiometer terminals can be fitted with AMP 110 series connectors (2.8 X 0.5mm) or equivalent. 2 For + direction 1. Leadwire color shown in parntheses 3. Leadwire lengths are 300mm

6 Mounting Panel Arrangement ø5.2 - (4x) Mounting Plate Standard (pre-attached) ø92 hole 70 ± ± ± ±0.5 Dimensions: mm