LCA701. Single Pole, Normally Open OptoMOS Relay INTEGRATED CIRCUITS DIVISION

Transcription

1 Single Pole, Normally Open OptoMOS Relay Parameter Rating Units Blocking Voltage V P Load Current. A rms / A DC On-Resistance (max). Input Control Current ma Features V P Blocking Voltage Operational Temperature Range: -ºC to +8ºC 7V rms Input/Output Isolation Low Drive Power Requirements Arc-Free With No Snubbing Circuits No EMI/RFI Generation Small -Pin Package Flammability Rating UL 9 V- Surface Mount and Tape & Reel Version Available Applications Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Meters (Watt-Hour, Water, Gas) Medical Equipment Patient/Equipment Isolation Security Aerospace Industrial Controls Description IXYS Integrated Circuits' is a V,.A,., normally open (-Form-A) solid state relay that uses optically coupled MOSFET technology to provide 7V rms of input-to-output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient infrared LED. is designed to replace electromechanical relays, and offers fast, reliable, bounce-free operation, as well as the superior reliability associated with solid state devices. Approvals UL Recognized Component: File # E77 CSA Certified Component: Certificate 779 EN/IEC 9- Certified Component: Certificate available on our website Ordering Information Part # Description Pin DIP (/Tube) S Pin Surface Mount (/Tube) STR Pin Surface Mount (/Reel) Pin Configuration AC/DC Configuration + Control Load Control Do Not Use Do Not Use Load DC-Only Configuration + Control Control Do Not Use + Load Load Switching Characteristics of Normally Open (Form A) Devices Form-A 9% % I LOAD t on t off DS--R

2 Absolute Maximum C Parameter Ratings Units Blocking Voltage V P Reverse Input Voltage V Input Control Current ma Peak (ms) A Input Power Dissipation mw Total Power Dissipation 8 mw ESD Rating, Human Body Model 8 kv Isolation Voltage, Input to Output ( Seconds) 7 V rms Operational Temperature - to +8 C Storage Temperature - to + C Derate linearly. mw / C Derate linearly.7 mw / C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at + C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Electrical C Parameter Conditions Symbol Min Typ Max Units Output Characteristics Load Current, Continuous AC/DC Configuration - I L - -. A rms / A DC DC-Only Configuration. A DC Peak Load Current t=ms I LPK - - ± A P On-Resistance AC/DC Configuration =ma, I L =.A -.. R DC-Only Configuration I ON F =ma, I L =.A -..9 Off-State Leakage Current V L =V P I LEAK - - A Switching Speeds Turn-On t =ma, V L =V on -.9 Turn-Off t off -. ms Output Capacitance =ma, V L =V, f=mhz pf Input Characteristics Input Control Current to Activate I L =A -. ma Input Control Current to Deactivate ma Input Voltage Drop =ma V F.9.. V Reverse Input Current V R =V I R - - A Common Characteristics Input to Output Capacitance V IO =V, f=mhz C IO - - pf Load current derates linearly ºC 8ºC. Measurement taken within one second of turn-on time. For applications requiring high temperature operation (T A > ºC) a minimum LED drive current of ma is recommended. R

3 PERFORMANCE DATA* Typical LED Forward Voltage Drop (N=, =ma) Typical Turn-On Time (N=, =ma, I L =7mA) Typical Turn-Off Time (N=, =ma, I L =7mA) LED Forward Voltage (V) Turn-On Time (ms) Turn-Off Time (ms) Typical for Switch Operation (N=, I L =A) Typical On-Resistance Distribution (N=, =ma, I L =A) Typical Blocking Voltage Distribution (N=, =ma) On-Resistance ( ) Blocking Voltage (V P ) LED Forward Current (ma) LED Forward Voltage vs. LED Forward Current LED Forward Voltage (V) Turn-On Time (ms) Typical Turn-On Time vs. LED Forward Current =7mA) Turn-Off Time (ms) Typical Turn-Off Time vs. LED Forward Current =7mA).8 LED Forward Voltage (V)... Typical LED Forward Voltage Drop. =ma. =ma =ma. =ma =ma Turn-On Time (ms) Typical Turn-On Time =7mA) =ma =ma =ma Turn-Off Time (ms) Typical Turn-Off Time =7mA).... =ma. =ma =ma R *Unless otherwise noted, data presented in these graphs is typical of device operation at ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department.

4 PERFORMANCE DATA* Typical for Switch Operation =A) On-Resistance ( ) Typical On-Resistance AC/DC Configuration ( =ma, I L =A) On-Resistance ( ) Typical On-Resistance DC-Only Configuration ( =ma, I L =A) Load Voltage (V) Typical Load Current vs. Load Voltage ( =ma) Load Current (ma) Load Current (A) Maximum Load Current ( =ma) Normalized Change (%) - Blocking Voltage Change (%) Normalized to ºC Leakage Current (na) Leakage Current Measured Across Pins & (V L =V) Output Capacitance (pf) Output Capacitance vs. Load Voltage ( =ma, f=mhz) 8 Load Voltage (V) Load Current (A) Energy Rating Curve s s ms ms ms s s s Time *Unless otherwise noted, data presented in these graphs is typical of device operation at ºC. For guaranteed parameters not indicated in the written specifications, please contact our application department. R

5 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-. Device Moisture Sensitivity Level (MSL) Classification / S MSL ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-. Soldering Profile Provided in the table below is the Classification Temperature (T C ) of this product and the maximum dwell time the body temperature of this device may be (T C - )ºC or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD- must be observed. Board Wash Device Classification Temperature (T c ) Dwell Time (t p ) Max Reflow Cycles ºC seconds S ºC seconds IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R

6 MECHANICAL DIMENSIONS 8.8 ±.8 (. ±.). ±.7 (. ±.) Pin. ±. (. ±.). ±.7 (. ±.) 7. ±. (. ±.) 7.9 TYP (.8 TYP) 9. ±.8 (. ±.). ±.7 (. ±.) -.8 DIA. ( -. DIA.). ±.7 (. ±.) PCB Hole Pattern. ±.7 (. ±.).8 ±.7 (. ±.) 7. ±.7 (. ±.). ±. (. ±.).7 ±.7 (.8 ±.). TYP (. TYP) Dimensions mm (inches) S 8.8 ±.8 (. ±.). ±.7 (. ±.). ±.7 (. ±.) PCB Land Pattern. (.) 9. ±.8 (.7 ±.) Pin. ±. (. ±.).7 ±.7 (.8 ±.). ±. (. ±.). ±.7 (. ±.) 7. ±. (. ±.). ±.7 (. ±.). (.9). (.) 8.9 (.). ±. (.7 ±.). ±. (. ±.) Dimensions mm (inches) R

7 STR Tape & Reel. Dia (. Dia) Top Cover Tape Thickness. Max (. Max) W=. (.) B =. (.98) Embossed Carrier Embossment K =.9 (.9) K =.8 (.) P =. (.7) User Direction of Feed A =. (.98) Dimensions mm (inches) NOTES:. All dimensions carry tolerances of EIA Standard 8-. The tape complies with all Notes for constant dimensions listed on page of EIA-8- For additional information please visit our website at: IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS--R Copyright 8, IXYS Integrated Circuits OptoMOS is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. //8