SP1124T Discrete Unidirectional TVS Diode
|
|
- Stanley Lester
- 5 years ago
- Views:
Transcription
1 SP1124T Discrete Unidirectional TVS Diode RoHS Pb GREEN Description This TVS diode is fabricated in a proprietary silicon avalanche technology and is used for high level protection of electronic equipment that may experience destructive electrostatic discharges (ESD. These robust TVS diodes can safely absorb repetitive ESD strikes at ±30kV (contact and air discharge, IEC without performance degradation. Additionally, SP1124T offers up to 20A 8/20 surge rating with low clamping voltages. Pinout and Functional Block Diagram PIN1 Features ESD, IEC , ±30kV contact, ±30kV air EFT, IEC , 40A (5/50ns Lightning, IEC nd edition, 20A (t P =8/20μs Low clamping voltage Low leakage current Moisture Sensitivity Level (MSL-1 Lead free and RoHS compliant PIN2 Applications Switches / Buttons Test Equipment / Instrumentation Point-of-Sale Terminals Medical Equipment Notebooks / Desktops / Servers Computer Peripherals Automotive Electronics Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. Revision: 06/22/17
2 Absolute Maximum Ratings Symbol Parameter Value Units Ppk Peak Pulse Power (tp=8/20μs 858 W T OP Operating Temperature -40 to 125 C T STOR Storage Temperature -55 to 150 C Notes: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T OP =25ºC Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V RWM I R 1μA 24.0 V Reverse Voltage Drop V R I R =1mA 26.7 V Leakage Current I LEAK V R =24V 1.0 μa I Clamp Voltage 1 PP =1A, t p =8/20µs, Fwd 29.0 V V C I PP =20A, t p =8/20µs, Fwd 42.9 V Dynamic Resistance 2 R DYN TLP, t P =100ns, I/O to GND 0.1 Ω Peak Pulse Current I pp t p =8/20µs 20.0 A ESD Withstand Voltage 1 V ESD IEC (Contact Discharge ±30 kv IEC (Air Discharge ±30 kv Diode Capacitance 1 C I/O-GND Reverse Bias=0V, f=1mhz 130 pf Note: 1. Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns 8/20μs Pulse Waveform Transmission Line Pulsing (TLP Plot 110% 100% 90% Percent of I PP 80% 70% 60% 50% 40% 30% 20% 10% 0% Time (μs TLP Current (A TLP Voltage (V
3 Temperature Capacitance vs. Bias Clamping voltage vs. I PP for 8/20μs waveshape Capacitance (pf Clamp Voltage (V C Bias Voltage (V Peak Pulse Current-I PP (A IEC kv Contact ESD Clamping Voltage IEC kv Contact ESD Clamping Voltage Soldering Parameters Reflow Condition Pre Heat - Temperature Min (T s(min 150 C - Temperature Max (T s(max 200 C Pb Free assembly T P Ramp-up t P Critical Zone TL to TP - Time (min to max (t s secs Average ramp up rate (Liquidus Temp (T L to peak 3 C/second max T L T S(max Preheat t L Ramp-down T S(max to T L - Ramp-up Rate 3 C/second max - Temperature (T L (Liquidus 217 C Reflow - Temperature (t L seconds Peak Temperature (T P /-5 C T S(min 25 t S time to peak temperature Time Time within 5 C of actual peak Temperature (t p seconds Ramp-down Rate 6 C/second max Time 25 C to peak Temperature (T P 8 minutes Max. Do not exceed 260 C
4 Part Marking System Part Numbering System SP 1124T 01 U T G AGK* TVS Diode Arrays (SPA Diodes G= Green T= Tape & Reel PIN1 Part code Date code Assembly site Voltage Number of Channels Package U: 1.6x1.0mm DFN Part code : AG = SP1124T-01UTG Ordering Information Part Number Package Marking Min. Order Qty. SP1124T-01UTG 1.6x1.0mm DFN AGKx 3000 Package Dimensions D L 1.6x1.0mm DFN Symbol Millimeters Min Nor Max E b A h A Pin1 1 2 Top View e Bottom View h D E b L A1 A e 1.10 BSC h Side View 1.00 Recommended Soldering pad layout (mm
5 Embossed Carrier Tape & Reel Specification Symbol Millimeters User Feeding Direction A / B / K / P / P / P / T / E / F / D / D W / Pin 1 Location Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at
SP11xx Series Discrete Unidirectional TVS Diode
SP11xx Series Discrete Unidirectional TVS Diode RoHS Pb GREEN Description Zener diodes fabricated in a proprietary silicon avalanche technology protect each I/O pin to provide a high level of protection
More informationSP A Discrete Bidirectional TVS Diode
SP1233 2A Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SP1233 includes TVS diodes fabricated in a proprietary silicon avalanche technology to protect each I/O pin and provide a high level
More informationSP pF 8kV DFN Plastic Unidirectional Discrete TVS
SP1053 8.5pF 8kV 01005 DFN Plastic Unidirectional Discrete TVS RoHS Pb GREEN Description Avalanche breakdown diodes fabricated in a proprietary silicon avalanche technology protect each I/O pin to provide
More informationSP pF 30kV Bidirectional Discrete TVS
SP1326 15pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1326 back-to-back diodes are fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
More informationAQ1003 Series - 30pF 30kV Unidirectional Discrete TVS
General Purpose ESD Protection - SP003 AQ003 Series AQ003 Series - 30pF 30kV Unidirectional Discrete TVS RoHS Pb GREEN Description This diode is fabricated in a proprietary silicon avalanche technology
More informationTVS Diode Arrays (SPA Diodes)
SP1005 Series 30pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1005 includes back-to-back Zener diodes fabricated in a proprietary silicon avalanche technology to provide protection
More informationAQxxC-01FTG Series 450W Bidirectional TVS Diode
General Purpose ESD Protection - AQxxC-1FTG Series AQxxC-1FTG Series 5W Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC-1FTG Series is designed to replace multilayer varistors
More informationAQ24CANFD 200W TVS Diode Array
AQ24CANFD 200W TVS Diode Array RoHS Pb GREEN Description The AQ24CANFD is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD, electrical fast
More informationSP pF SOT23-6L 4 Channels Diode Array
SP319.3pF SOT23-6L 4 Channels Diode Array RoHS Pb GREEN Description 4 5 6 3 2 1 SP312-3UTG Pinout *Pins 6, 7, 9, 1 are not internally connected but should be connected to the trace. 6 7 8 9 1 5 4 3 2 1
More informationAQ1026 Series 15pF 30kV Bidirectional Discrete TVS
General Purpose ESD Protection - AQ126 SP126 Series AQ126 Series 15pF 3kV Bidirectional Discrete TVS RoHS Pb GREEN Description Avalanche breakdown diodes fabricated in a proprietary silicon avalanche technology
More informationAQ4020 Series 2.5pF, 30A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes) Lightning Surge Protection- AQ4020 SP4020 Series AQ4020 Series 2.5pF, 30A Discrete TVS Diode RoHS Pb GREEN Description The AQ4020 components integrate low capacitance steering
More informationTVS Diode Arrays (SPA Diodes) SP1005 Series 30pF 30kV Bidirectional Discrete TVS. General Purpose ESD Protection - SP1005 Series Flipchip SOD882
SP1005 Series 30pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1005 includes back-to-back Zener diodes fabricated in a proprietary silicon avalanche technology to provide protection
More informationAQ4022 Series 1.3pF, 15A Discrete TVS Diode
TVS Diode Arrays (SPA Diodes Lightning Surge Protection- SP4022 AQ4022 Series AQ4022 Series 1.3pF, 15A Discrete TVS Diode RoHS Pb GREEN Description The AQ4022 series integrates low capacitance steering
More informationSP4050 Series. TVS Diode Arrays (SPA Diodes) Lightning Surge Protection - SP4050 Series. RoHS Pb GREEN. Description
SP4050 Series RoHS Pb GRN Description The SP4050 integrates low capacitance diodes with an additional zener diode to protect each I/O pin against SD and high surge events. This robust component can safely
More informationSP1050 Series for Power-over-Ethernet PSE Protection
SP1050 Series for Power-over-Ethernet PSE Protection RoHS Pb GREEN Description The SP1050-04BTG provides over-voltage protection for Power-over-Ethernet PSE equipment in a space saving SOIC-8 package.
More informationLow Capacitance ESD Protection - SP3002 Series. Description. Features I/O 4 I/O 3. Applications
SP3002 Series 0.85pF Diode Array RoHS Pb GREEN Description The SP3002 has ultra low capacitance rail-to-rail diodes with an additional zener diode fabricated in a proprietary silicon avalanche technology
More informationSP8008 Series Diode Array
SP88 Series Diode Array RoHS Pb GRN Description The SP88 integrates eight channels of ultra low capacitance common mode protection for electronic equipment exposed to electrostatic discharges (SD. This
More informationSD05C Series 450W Discrete Bidirectional TVS Diode
TVS Diode rrays (SP Devices) General Purpose ESD Protection - 450W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional SD05C TVS diode is designed to replace multilayer varistors
More informationSP2555NUTG 2.5V 45A Diode Array
SP2555NUTG 2.5V 45A Diode Array RoHS Pb GREEN Description The SP2555NUTG is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge), CDE (cable discharge
More informationSP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
More informationSP5001 Series 4 Channel TVS Common Mode Filter
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection
More informationSP5001 Series 4 Channel Common Mode Filter with ESD Protection
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel Common Mode Filter with ESD Protection RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF) providing
More informationSP1003 Series - 30pF 30kV Unidirectional Discrete TVS
General Purpose ESD Protetion - SP003 Series SP003 Series - 30pF 30kV Unidiretional Disrete TVS RoHS Pb GREEN Desription Zener diodes fabriated in a proprietary silion avalanhe tehnology protet eah I/O
More informationSMP ETG TVS Arrays
SMP3022-01ETG TVS Arrays Description The SMP3022 includes back-to-back TVS diodes fabricated in a proprietary silicon avalanche technology to provide protection for electronic equipment that may experience
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
More informationDATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
More informationElectrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The series of is designed to protect power port and the chip Vbus interfaces. It has been specifically designed to protect sensitive
More informationSP724 Series 3pF 8kV Rail Clamp Array
SP74 Series pf 8kV Rail Clamp Array RoHS Pb GREEN Description Pinout Functional Block Diagram V+ IN V- SP74 (SOT-) TOP VIEW, 4 AND 6 IN. The NOTES: design of the SP74 SCR/Diode ESD Protection Arrays are
More informationSRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
More informationIEC (EFT) 40A
Features ESD Protect for high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4- (ESD) ±1kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (/0ns) IEC 61000-4- (Lightning) 1A (8/0µs)
More informationTVS/ESD Arrays. RLST23A712C Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLST23A712C Series TVS/ESD Arrays - RLST23A712C Series Features 400 Watts Peak Pulse Power per Line (tp = 8/20μs) Protects two +12V to -7V lines Low Leakage Current Low operating
More informationAZC002-02N Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 2 high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O, 40A for
More informationPESD0402MS05 Surface Mount Polymeric ESD Suppressor
\ Description polymeric ESD suppressor help protect sensitive electronic equipment against electrostatic discharge (ESD) without distorting data signals. This protection is a result of its ultra-low capacitance
More informationPESDWC23T5VU ESD Protector
ESD Protector Description The is a Transient Voltage Suppressor Arrays that 3 designed to protect components which are connected to data and transmission lines against electrostatic discharge(esd), electrical
More informationPESDALC10N3V3U Low Capacitance TVS Array
Description The is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other
More informationPTVSHC2EN10VU Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
More informationAZC002-04S Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
More informationPESDALC143T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to
More informationAZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for Line with Bi-directional. Provide ESD protection for the protected line to IEC 6000-4- (ESD) ±0kV (air), ±kv (contact) IEC 6000-4-4 (EFT) 40A (5/50ns) IEC 6000-4-5 (Lightning)
More informationTVS/ESD Arrays. RLSD52Axx1V Series. Circuit Protection System ELECTRONICS
ELECTRONICS TVS/ESD Arrays RLSD52Axx1V Series Features 100 Watts Peak Pulse Power per Line (tp = 8/20μs) Working voltages: 3.3V 5V 8V 12V 15V 24V 36V Low Leakage Current Low operating and clamping voltages
More informationPTVSHC3N7VUL1 Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
More informationPESDSC9D5VU ESD Protector
ESD Protector Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large cross-sectional
More informationUM5075/5079 Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN General Description Applications Features
General Description Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN2 1.0 0.6 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as
More informationPESDALC10FN5VU Low Capacitance TVS Array
PESDALC1FN5VU Low Capacitance TVS Array Description The PESDALC1FN5VU is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics
More informationUESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
More informationINPAQ Global RF/Component Solutions
TVN 0201 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVN 0201 01 SP0 Size EIA 0201 TVN 0201 01 SP0 Engineering Specification 1. Scope TVN 0201 01 SP0 is a TVS
More informationCitrusCom CS Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±30kV (Air) ±30kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) IEC 61000-4-5 (Surge) 10A (8/20μs) Package optimized for high-speed
More informationSELC0504F Low Capacitance Tvs Diode Array DESCRIPTION FEATURES APPLICATIONS IEC COMPATIBILITY MAXIMUM RATINGS
DESCRIPTION The SELC0504F provides a typical line to line capacitance of 0.6pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally suited for USB 2.0 applications,such
More informationSDP Biased Series - SOT23-6
SDP Biased Series - SOT23-6 RoHS Pb e3 Description This new SDP Biased series provides overvoltage protection for applications such as VDSL2, ADSL2, and ADSL2+ with minimal effect on data signals. This
More informationUMD05B-323 UNITED MICRO DEVICE INC. Small Surface Mount Device TVS. Description. SOD-323 Pin Configuration. Mechanical Characteristics.
SOD-323 Single Line Diode for ESD Protection Description diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer
More informationESD4-DFN LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
LOW CAPACITANCE TVS ARRAY Description The is a multi-line, low capacitance, 7pF @ 2.5V bias transient voltage suppressor array. This device is designed to protect applications such as wireless telecommunication
More informationAOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications
Low Capacitance 2.5 V TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines from ESD and lightning. This incorporates twelve low capacitance
More informationCitrusCom CS0801S. Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±15kV (Air) ±8kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) Cable Discharge Event (CDE) Package optimized for high-speed lines
More informationSDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical
More informationRClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
More informationSpecification Status: RELEASED
PAGE NO.: 1 OF 6 Specification Status: RELEASED BENEFITS Low capacitance; provides low insertion loss for high speed data signals Small size ESD protection diodes for high speed data signals (0201 size
More informationPTVSLC3D5VB Low Capacitance TVS
Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,
More informationSM05G. Low Capacitance Quad Line ESD Protection Diode Arry SM05/G SOT23-3. General Description. Rev.02 Nov.
Low Capacitance Quad Line ESD Protection Diode Arry SOT23-3 General Description The of transient voltage suppressors (TVS) are designed to protect components which are connected to data and transmission
More informationPESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationRClamp7528T. Ultra Low Capacitance TVS Array. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description. Mechanical Characteristics
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationTClamp1202P. Low Capacitance TClamp Surge Protection for 12V Interfaces. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
TClamp122P Low Capacitance TClamp Surge Protection for 12V Interfaces PROTECTION PRODUCTS Description TClamp 122P provides dedicated surge and ESD protection for RS-485 and other 12V lines in industrial
More informationPESDLC553T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface that designed to
More information0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
More informationSPECIFICATION FOR APPROVAL INDEX
SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SCOPE...1 EXPLANATION OF PART NUMBER.1 CIRCUIT DIAGRAM & DIMENSION.....1 SPECIFICATIONS..2 TAPING PACKAGE AND LABEL MARKING...3-4 PRECAUTIONS FOR HANDLING...5-7
More informationPESDLC363T5VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More informationINPAQ Global RF/Component Solutions
TVL SC7 4 AC Specification Product Name Series Part No Package Size Transient Voltage Suppressor TVS Series TVL SC7 4 AC SC7-6L TVL SC7 4 AC Engineering Specification 1. Scope TVL SC7 4 AC s are TVS arrays
More informationINPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201
TVN 0201 01 AB0 Specification Product Name Transient Voltage Suppressor Series TVS Series Part No TVN 020101 AB0 Size EIA 0201 TVN 0201 01 AB0 Engineering Specification 1. Scope TVN 0201 01 AB0 is a TVS
More informationSPECIFICATION Brightek (Europe) Limited Semiconductor T01 Device. 1. Part Number Identification T A
1. Part Number Identification T01-0402 - 050-100 A - 11 Series Name Size Case : 0402 (DFP1006) 11 Bidirectional Inner code Reverse Working Voltage 050=5*10 0 =5V Parasitic Capacitance 100=10*10 0 =10pF
More informationTVN S AB0 Engineering Specification
TVN S3 A Engineering. Scope TVN S3 A s are TVS diodes designed to protect one power/control line or one low speed signal line from overvoltage hazard of Electrostatic Discharge (ESD), Electrical Fast Transients
More information4-Line BUS-Port ESD-Protection - Flow Through Design VBUS054CD-FHI VBUS054CD-FHI-GS
4-Line BUS-Port ESD-Protection - Flow Through Design Features Compact LLP2513-11L package Low package height
More informationParameter Value Unit. Contact Discharge Voltage Per IEC KV. Air Discharge Voltage Per IEC KV. Operating Temperature -55 to +125
1 Feature Ultra-Low capacitance:0.05pf(typ.) Fast response time(
More informationAZC099-04S 4 IEC (ESD)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
More informationCommon Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.
Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB
More informationAOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
More informationLow Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN
General Description UM5080T Low Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN2 1.0 0.6 The UM5080T TVS protection diode is designed to replace multilayer varistors (MLVs) in portable
More informationRClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
More informationRClamp3374N. High Power TVS for Ethernet Interfaces. PRELIMINARY Features
PROTECTION PRODUCTS - RailClamp Description RailClamp TS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage
More informationWPE0541P1 1-Line Bi-directional Low Capacitance TVS Diode
Description Mechanical Characteristics The is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time,
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION DESCRIPTION DRAWN Y DESIGNED Y CHECKED Y APPROVED Y TVL 0201 01 SP0 Sandy Aaron Aaron YuChiaChang TVL 0201 01 SP0 Engineering 1. Scope TVL 0201 01 SP0 is a TVS diode designed to protect
More informationPTVSLC3D24VB Low Capacitance TVS
Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage
More informationTVH AB1 Engineering Specification
TVH 0402 01 A1 Engineering 1. Scope GENERAL DESCRIPTION TVH 0402 01 A1 is a silicon base in ultra small SMD special packages. It is designed to protect sensitive electronics from damage or latch up due
More informationINPAQ Global RF/Component Solutions
TVL 0402 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVL 0402 01 SP0 Size EIA 0402 TVL 0402 01 SP0 Engineering Specification 1. Scope TVL 0402 01 SP0 is a TVS
More informationST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
More informationRClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
More informationProduct Engineering Specification TVH SP0
Part : TVH020101SP0 Version : A1 Page : 1 / 9 SCOPE Product Engineering Specification TVH 0201 01 SP0 TVH 0201 01 SP0 is a TVS diode designed to protect one power/control line or one signal line from overvoltage
More informationRClamp7522T. Ultra Low Capacitance TVS Array PRELIMINARY
- RailClamp Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
More informationSpecification Status: RELEASED
PAGE NO.: 1 OF 6 BENEFITS Specification Status: RELEASED Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Small size ESD protection diodes for high speed
More informationPESDNC553T5VU Normal Capacitance ESD Protector
Normal Capacitance ESD Protector Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is normal capacitance transient voltage suppressors for high speed
More informationAZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for 1 Line with Bi-directional. Provide ESD protection for the protected line to IEC 61000-4- (ESD) ±16kV (air), ±16kV (contact) IEC 61000-4-4 (EFT) 50A (5/50ns) IEC 61000-4-5 (Lightning)
More information4-Line BUS-Port ESD Protection Array - Flow Through Design
-Line BUS-Port ESD Protection Array - Flow Through Design 22736 5 MARKING Pin 1 5F = type code = date code month YY = date code year DESIGN SUPPORT TOOLS click logo to get started Models Available 1 YY
More informationUM5204EEBF. Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EECF TSOP-6/SOT23-6. General Description
Quad Channel Low Capacitance ESD Protection Array UM5204EEAF SC70-6/SC88/SOT363 UM5204EEBF SC89-6/SOT563/SOT666 UM5204EECF TSOP-6/SOT23-6 General Description are surge rated diode arrays designed to protect
More informationBi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
More informationSpecification Status: RELEASED
PAGE NO.: PAGE 1 of 6 Specification Status: RELEASED BENEFITS Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Industry s smallest footprint and lowest profile
More informationUM5204EECE. Quad Channel Low Capacitance ESD Protection Array. General Description. Rev.03 Dec /6
Quad Channel Low Capacitance ESD Protection Array TSOP-/SOT3- General Description is surge rated diode arrays designed to protect high speed data interfaces. This series has been specifically designed
More informationSRV05-4A. Green Products. Description. Features. China - Germany - Korea - Singapore - United States - smc-diodes.
Description The SRV05-4A is a low capacitance TVS (Transient Voltage Suppressor) array designed to protect sensitive semiconductor components from electrical overstress when interfaced to high-speed data
More informationPESDUC2FD5VB ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
More information4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 XX YY DESIGN SUPPORT TOOLS click logo to get started Models
More information