CABINET OMNIALOG DATA ACQUISITION SYSTEMS OMNIACABXX FEATURES

Size: px

Start display at page:

Download "CABINET OMNIALOG DATA ACQUISITION SYSTEMS OMNIACABXX FEATURES"

Malcolm Gray
5 years ago
Views:

1 CABINET OMNIALOG OMNIAlog systems are designed and assembled around OMNIAlog modules. They are the right solution in every project that requires automatic data acquisition, pushing data on ftp, remote management, SMS and/or alerting, data pubblication on web pages or simply local data download on USB memory stick. OMNIAlog versatility and flexibility allow enable customized systems to meet any project requirements. Cabinets with internal multiplexer board expansions and a variety of communication interfaces allow to manage a large number of channels (sensors) by one logger. When a distributed sensors network is preferred, external multiplexer boxes operate as peripheral units connected to OMNIAlog in daisy chain or star configuration. FEATURES allowed in unattended areas or hard environment conditions High performances in verywide temperature conditions Compatible with all major sensors, with both analogue or digital output GB internal memory Stand alone or part of network REVISION : 1.0 DATE: Sept. 01 info@ruggedaq.com Via F. Serpero /F 000 Masate (MI) Phone Fax

2 SISTEM DATALOGGER NI-0OMNIACAB0 5 1 OMNIAlog mod. NI-0OMNIACAB0 is the solution for simple monitoring systems that need automatic data acquisition for analogue and digital instruments, remote management or the possibility to connect external multiplexer boxes. The NI-0OMNIACAB0 is housed in IP5 polycarbonate enclosure with wall mounting brackets, including OMNIAlog module, 1V 7Ah backup battery, USB memory stick and LAN cable for PC/Laptop local connection. It is powered by a 85-0V 50-0 Hz power unit housed in a IP7 box or by solar power kit. Instrument cable input OMNIAlog module for both analogue and digital instruments (refer to OMNIAlog main specifications) Lockable polycarbonate IP5 box, 500x00x00 mm (LxBxH). Customized enclosure are available on request 1V 7Ah. Not installed if the system is powered by solar panel kit No.8 on-board differential channels (No.7 if internal or external MUX boards are connected) No. RS-85 for digital instruments / multiplexers, No. inputs for switch closure, high frequency pulse or trigger Up to No.91 analogue instruments or up to 50 digital instruments has No. brakets for wall mounting. NOT compatible with 0AX0SH15X80 support frame M cable gland. Customized cable glands are available on request. LAN port (10/100 Mbps, RJ5), USB port (.0, pen drive only), RS port (GPRS modem only) Backlight LCD 18x dpi with membrane keyboard for the minimal local management without PC 1- OMNIAlog module - - Connector for power supply - Cable gland for instrument cables input - Reserved area for one of the following devices: - No.1 or multiplexer boards for analogue instruments (NI-0OMNMUX00) - No.1 digital instruments power supply and wiringboard (NI-0OMXV100W) - No.1 wiring board for - chains of external multiplexers (NI-0OMXMUXEXT)

3 DIGITAL LOGGER NI-0OMNIACABD 5 1 OMNIAlog mod. NI-0OMNIACABD is the solution when only digital instruments have to be read and managed. Remote management is allowed through optional communication interface to be installed in the cabinet (GPRS modem, G router, etc...). The core of this system is the O NIA D-module, able to manage up to 50 digital instruments. Multiplexer expansion boards are not supported. The NI-0OMNIACABD is housed in IP5 polycarbonate enclosure with wall mounting brackets, supplied with OMNIAlog D-module, 1V 7Ah backup battery, digital instruments kit, USB memory stick and LAN cable for PC/Laptop connection. It is powered by a 85-0V 50-0 Hz power unit housed in a IP7 box or by solar power kit. Instrument cable input OMNIAlog D-module for digital instruments (refer to OMNIAlog D-module main specifications) Lockable polycarbonate IP5 box, 500x00x00 mm (LxBxH). Customized enclosure are available on request. 1V 7Ah. Not inserted if supplied with solar panel kit. - No.1 RS-85 for digital instruments, No. inputs for switch closure, high frequency pulse or trigger Up to 50 digital instruments has No. brakets for wall mounting. NOT compatible with 0AX0SH15X80 support frame M cable gland. Customized cable glands available on request LAN port (10/100 Mbps, RJ5), USB port (.0, pen drive only), RS port (GPRS modem only) Backlight LCD 18x dpi with membrane keyboard for the minimal local management without PC 1- OMNIAlog D-module - - Connector for power supply - Cable gland - Digital instruments power supply

4 DATALOGGER NI-0OMNIACAB0 1 OMNIAlog mod. NI-0OMNIACAB0 is the most used OMNIAlog solution: it allows to manage at the same time both digital and analogue instruments, internal and external multiplexers, and communication interfaces. The high-quality stainless steel enclosure, installed on wall or support frame, permits long term installation also in aggressive environment. The NI-0OMNIACAB0 is housed in IP5 stainless steel enclosure with wall mouting brackets, supplied with OMNIAlog module, rack for up to No. multiplexer boards,1v 7Ah backup battery, USB memory stick and LAN cable for PC/Laptop connection. It is powered by a 85-0V 50-0 Hz power unit housed in a IP7 box or by solar power kit. 5 Number of MUX boards supported OMNIAlog module for both analogue and digital instruments (refer to OMNIAlog main specifications) Lockable stainless steel IP5 box, 00x00x50 mm (LxBxH). Customized enclosure are available on request. 1V 7Ah. Not inserted if supplied with solar panel kit. No.8 on-board differential channels. (No.7 if internal or external MUX board are connected) Up to No. internal MUX ( channels each), up to No.1 external MUX ( channels each) No. RS-85 for digital instruments / multiplexers, No. inputs for switch closure, high frequency pulse or trigger Up to No.91 analogue instruments, up to 50 digital instruments has No. brakets for wall mounting. Compatible with 0AX0SH15X80 support frame LAN port (10/100 Mbps, RJ5), USB port (.0, pen drive only), RS- port (GPRS modem only) Backlight LCD 18x dpi with membrane keyboard for the minimal local management without PC 1- OMNIAlog module - - Cable gland - Rack for up to N. multiplexer boards (NI-0OMNMUX00) - Reserved area for one of the following devices: - No.1 digital instruments kit (NI-0OMXV100W) - No.1 - chains mux box wiring board (NI-0OMXMUXEXT)

DATALOGGER NI-0OMNIACAB80 5 1 OMNIAlog mod.

5 DATALOGGER NI-0OMNIACAB OMNIAlog mod. NI-0OMNIACAB80 is used in huge projects where a large number of analogue instruments have to be connected both to OMNIAlog location and/or to multiplexer external boxes. The dimensions of NI-0OM- NICAB80 enclosure also allow to manage with just one OMNIAlog module either digital instrument chains, that external multiplexer chains and communication interface. The NI-0OMNIACAB80 is housed in IP5 stainless steel enclosure with wall mounting brackets, supplied with OMNIAlog module, rack for up to No.8 multiplexer boards,1v 7Ah backup battery, USB memory stick and LAN cable for PC/Laptop connection. 7 Number of MUX boards supported OMNIAlog module for both analogue and digital instruments (refer to OMNIAlog main specifications) Lockable stainless steel IP5 box, 00x00x50 mm (LxBxH). Customized enclosure are available on request. 1V 7Ah. Not inserted if supplied with solar panel kit. No.8 on-board differential channels (No.7 if internal or external MUX board are connected) Up to No.8 internal MUX ( channels each), up to No.8 external MUX ( channels each) No. RS-85 for digital instruments / multiplexers, No. inputs for switch closure, high frequency pulse or trigger Up to No.91 analogue instruments + up to 50 digital instruments has No. brakets for wall mounting. Compatible with 0AX0SH15X80 support frame LAN port (10/100 Mbps, RJ5), USB port (.0, pen drive only), RS- port (GPRS modem only) Backlight LCD 18x dpi with membrane keyboard for the minimal local management without PC 1- OMNIAlog module - - Cable glands - Rack for up to N.8 multiplexer boards (NI-0OMNMUX00) - -chains mux box wiring board area (NI-0OMXMUXEXT) 7- Digital instruments kit (NI-0OMXV100W) 5

STAND-ALONE SOLUTIONS SISTEM Complete stand-alone solution powered by solar panel composed of cabinet (OMNIACAB0 or OMNIACAB80 ), power supply stuff, supports. See details below.

6 STAND-ALONE SOLUTIONS SISTEM Complete stand-alone solution powered by solar panel composed of cabinet (OMNIACAB0 or OMNIACAB80 ), power supply stuff, supports. See details below. POWER SUPPLY UNITS MAINS POWER SUPPLY NI-0AXBCO000 SUPPORT FRAME NI-0AX0SH15X80 SOLAR PANEL PACKAGE NI-0AX00W000AH POLE FOR SOLAR PANEL NI-0AX0PALO80 AC/DC charger, IP7 protection. Vin 85- Vac, 50-0 Hz Vout 1.7Vdc/.5 A. Galvanized steel mounting frame compatible with OMNIACAB and OMNIACAB8 datalogger. Solar panel power supply package for pole mounting. Equipped with solar panel, battery package with regulator and support brackets. Floor-mounting m pole for solar panel package with base plate. Also available for mounting frame mod. 0AX0SH0PALO. COMMUNICATION INTERFACES VPN G ROUTER NI-0OMXROUTVPN G ROUTER NI-0OMXROUTG0 GSM/GPRS MODEM NI-0OMXGSMGQB FIBER OPTIC INTERFACE NI-0OMXFOMMSWT G-VPN advanced router for fast connection, required when the Internet Service Provider don t support static IP address and inbound/outbound data traffic. G fast connection router, when Internet Service Provider permits inbound/outbound data traffic. GSM/GPRS quad-band modem, antenna and 10m cable. Reccomended only for data-pushing on ftp or , and SMS/ alarms. Switch ethernet with multimode optical fiber ports for in/out. NI-0OMXFOMMPC0 desktop ethernet switch provides connection to PC/server. EXPANSION DEVICES CH MUX BOARD NI-0OMNMUX00 CH MUX BOX NI-0OMNMUXB0 8 CH MUX BOX NI-0OMN8MUXB0 DIGITAL SENSOR KITS NI-0OMXV100W - NI-0OMXV00W channels relays multiplexer with surge arrestors for each channel. channels relays multiplexer, housed in IP5 polycarbonate box (00x00x180mm) including surge arrestors for each channel. 8 channels relays multiplexer, housed in IP5 polycarbonate box (00x00x180mm) including surge arrestors for each channel. DC/DC 1/V converter and wiring board for expanding up to: - no. 50 digital sensors,100w - no. 0 digital sensors, 0W both distributed in maximum chains.

mini CRD OMNIA _ MINI OMNIALOG READOUT UNITS AND DATALOGGERS

mini CRD OMNIA _ MINI OMNIALOG READOUT UNITS AND DATALOGGERS CRD _ MINI LOG READOUT UNITS AND DATALOGGERS MINI _EN_07_02/2018 MINI LOG Mini log is a four-channel logger that can be factory-configured to read specific types of sensors: it reads analog (current, voltage,