CM and SB Series Single Phase Bridge Rectifiers

Transcription

1 Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through hole for number 8 screw. Terminals solderables per MIL-STD-202, Method 208. Isolated voltage from case to lead over 2000 Volts. Dimensions : Inches (Millimetres) Mechanical Data : Terminals Weight Mounting position : Plated 0.25 Faston or wire Lead 40 mils : 1 ounce, 30 grams. : Any. Page 1 31/05/05 V1.0

2 Maximum ratings and electrical characteristics: Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Units Maximum recurrent peak reverse voltage Maximum RMS input voltage Maximum DC blocking voltage V Maximum recurrent peak reverse voltage Maximum average forward current* for resistive load at TC = 55 C Non-repetitive peak forward surge current at rated load () Peak forward surge current single sine-wave superimposed on rated load (JEDEC method) () Max Forward Voltage per Bridge Element at Specified Current () CM10 CM15, SB15 CM25, SB25 CM35 CM40 CM CM10 CM15, SB15 CM25, SB25 CM35 CM40 CM Maximum instantaneous forward voltage drop per element at specified current () Maximum Reverse Leakage Current at Rated DC Blocking Voltage () Maximum reverse DC current at rated DC blocking voltage per element () CM10 5A CM15 I F 7.5A CM A CM A CM40 20A CM 25A SB15 7.5A SB A 0 0 V A Α 1.1 v 10.0 µa I 2 t Rating for fusing (t < 8.3ms) CM10, CM15, CM25 CM35, CM40, CM A 2 S Typical thermal resistance (Fig. 3) RθJC () Typical thermal resistance RθJC () C/W Operating temperature range T J Storage temperature range T STG () -55 to +1 C Operating and storage temperature range () - to +125 / - to +1 C NOTES * Unit mounted on metal heat-sink. Thermal resistance from junction to case Page 2 31/05/05 V1.0

3 Ratings and Characteristics Curves CM0 THRU CM00 AVERAGE POWER DISSIPATION OF BRIDGE, WATTS IFM AMPERES PEAK AVERAGE OUTPUT CURRENT, AMPERES VFM VOLTS PEAK Fig. 1-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS AT T J = 25 C CASE TEMPERATURE T C C Fig. 2-OUTPUT CURRENT VS. CASE TEMPERATURE RESISTIVE OR INDUCTIVE LOAD T J = 1 C AVERAGE OUTPUT CURRENT, AMPERES AMBIENT TEMPERATURE, T A C Fig. 3-OUTPUT CURRENT VS. AMBIENT TEMPERATURE RESISTIVE OR INDUCTIVE LOAD BRIDGE MOUNTED ON A 8" 8" ALUMINUM PLATE 25" THICK AVERAGE OUTPUT CURRENT, AMPERES Fig. 4-POWER DISSIPATION VS. AVERAGE OUTPUT CURRENT RESISTIVE OR INDUCTIVE LOAD, T J = 1 C Page 3 31/05/05 V1.0

4 SB1510 and SB251 Rating and Characteristic Curves Figure - 1 Typical Forward Current Derating Curve Figure - 2 Maximum Non-Repetitive Surge Current Average Forward Current, Amperes Peak Forward Surge Current, Amperes Number of Cycles at 60Hz Case Temperature, ( C) Figure - 3 Typical Reverse Characteristics Figure - 4 Typical Forward Characteristics Instantaneous Reverse Current, Micro Amperes Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Current Amperes Forward Voltage, Volts Page 4 31/05/05 V1.0

5 Specifications Current Rating (A) Vrrm (V) Maximum AC Input Voltage (V) Part Number 35 CM10 70 CM11 0 CM CM CM CM16 0 CM SB CM20 70 CM21 0 CM CM CM CM26 0 CM28 70 SB CM31 0 CM CM CM CM36 CM CM CM CM CM CM CM06 0 CM010 Page 5 31/05/05 V1.0

6 Notes: International Sales Offices: AUSTRALIA Farnell InOne Tel No: Fax No: FINLAND Farnell InOne Tel No: Fax No: NETHERLANDS Farnell InOne Tel No: Fax No: SWITZERLAND Farnell InOne Tel No: Fax No: AUSTRIA Farnell InOne FRANCE Farnell InOne NEW ZEALAND Farnell InOne UK Farnell InOne Tel No: Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: Fax No: BELGIUM Farnell InOne GERMANY Farnell InOne NORWAY Farnell InOne UK BuckHickman InOne Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: BRAZIL Farnell-Newark InOne Tel No: Fax No: HONG KONG Farnell-Newark InOne Tel No: Fax No: PORTUGAL Farnell InOne Tel No: Fax No: UK CPC CHINA Farnell-Newark InOne Tel No: Fax No: IRELAND Farnell InOne Tel No: Fax No: SINGAPORE Farnell-Newark InOne Tel No: Fax No: export EXPORT Farnell InOne Tel No: Fax No: For enquiries from all other markets DENMARK Farnell InOne ITALY Farnell InOne SPAIN Farnell InOne Tel No: Tel No: Tel No: Fax No: Fax No: Fax No: ESTONIA Farnell InOne Tel No: Fax No: MALAYSIA Farnell-Newark InOne Tel No: Fax No: SWEDEN Farnell InOne Tel No: Fax No: Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. Premier Farnell plc Page 6 31/05/05 V1.0